Rol van ISSeP als sectoraal operator
|
|
|
- Milton Cross
- 6 years ago
- Views:
Transcription
1 Rol van ISSeP als sectoraal operator B. Bergmans TC146 TC264 ISSEP : CORE BUSINESS ISSeP : Main activity RISK EVALUATION ENVIRONMENTAL MONITORING ENVIRONMENTAL MONITORING Air Water soil RESEARCH & TECHNOLOGY 1
2 ISSEP : CORE BUSINESS ISSeP : Main activity ENVIRONMENTAL MONITORING RISK EVALUATION Air Water soil RESEARCH & TECHNOLOGY ENVIRONMENTAL MONITORING Air Water soil ISSEP : CORE BUSINESS ISSeP : Main activity ENVIRONMENTAL MONITORING RISK EVALUATION Air Water soil RESEARCH & TECHNOLOGY RISK EVALUATION 2
3 ISSEP : CORE BUSINESS ISSeP : Air quality department ENVIRONMENTAL MONITORING Air AIR MONITORING - Ambient air network - Mobile laboratories - Emission monitoring REFERENCE LABORATORY - Audit RW - Sector operator (NBN) TECHNICAL ADVISE RESEARCH FACILITIES - Pilot installation - Research program WHAT IS A STANDARD Definition of a Standard? A standard is a technical document designed to be used as a rule, guideline or definition. It is a consensus-built, repeatable way of doing something. A standard is not always the best solution! 3
4 WHAT IS A STANDARD Definition of a Standard? A standard is a technical document designed to be used as a rule, guideline or definition. It is a consensus-built, repeatable way of doing something. Harmonized way of doing Same rule in 33 countries WHAT IS A STANDARD Definition of a Standard? A standard is a technical document designed to be used as a rule, guideline or definition. It is a consensus-built, repeatable way of doing something. Lobbying is part of the game 4
5 WHAT IS A STANDARD Definition of a Standard WHAT IS A STANDARD General procedure for developing a standard 5
6 WHAT IS A STANDARD General procedure for developing a standard ROLE OF ISSEP AS SE Role of NBN AND ISSEP National Standardization Bodies (NSB) All European countries have a National Standardization Body For Belgium = NBN assisted by ISSeP as Sector operator -Promotes the Normalization -Enables measure of consultation and support at national level -Ensures consensus at national level -Appointing experts to Technical Committee and working group -Obligation of commenting and Voting - Sales publishing standard - withdraws any conflicting national standards 6
7 ROLE OF ISSEP AS SE PASSIF MEMBER : Description PASSIF MEMBER OF A COMMISSION Access : - No special condition required just prove interest Prerogative and obligation - Access to all N-doc of the commission. - Can submit informative comments - Can submit informative votes - No obligation except not circulating documents Financial cost : -100 /year per TC and SC ROLE OF ISSEP AS SE PASSIF MEMBER : N-doc consultation 7
8 ROLE OF ISSEP AS SE PASSIF MEMBER : N-doc consultation ROLE OF ISSEP AS SE PASSIF MEMBER : N-doc consultation 8
9 ROLE OF ISSEP AS SE ACTIF MEMBER : Description ACTIF MEMBER OF A COMMISSION Access : -Being a passive member of the commission -Prove technical skills, interest and define links with commercial companies Prerogatives and obligations -Access to all intern document of the WG -Possibility to represent Belgium at TC level -Possibility to chair a WG -Obligation to take active part to the work of the WG -Obligation of votes / comments on all N-Doc related to the WG -Obligation to take part to WG meeting regularly -Financial cost : -50 /year per WG. -Free for academic and Government agency ROLE OF ISSEP AS SE ACTIF MEMBER : WG document consultation 9
10 ROLE OF ISSEP AS SE ACTIF MEMBER : WG document consultation Way of voting ROLE OF ISSEP AS SE 10
11 Way of voting ROLE OF ISSEP AS SE ROLE OF ISSEP AS SE National mirror committee - Maximum 3 Belgian expert per WG - Meeting organize if difference of view - Designation of heat of delegation 11
12 ROLE OF ISSEP AS SE Other tools available to help in the normalization process OTHER TOOLS AVAILLABLE : -Room available for meeting -Organization of web conference - BELGIAN EXPERT FOR AIR Actual CEN normalization SC/WG Title CEN/TC 264/WG 1 Dioxins - emissions CEN/TC 264/WG 2 Air quality - Determination of odour concentration by dynamic olfactometry CEN/TC 264/WG 3 HCl Emission - manual method CEN/TC 264/WG 4 Total gaseous organic carbon (emissions) CEN/TC 264/WG 5 Total dust at low concentrations (emissions) CEN/TC 264/WG 8 Measurement of total mercury emissions CEN/TC 264/WG 9 Quality assurance of automated measuring systems CEN/TC 264/WG 11 Ambient air quality - Diffusive samplers for the determination of gases and vapours - CEN/TC 264/WG 12 Reference method for determination of SO2/NO2/O3/CO in ambient air CEN/TC 264/WG 15 Particulate Matter (PM10/PM2,5) CEN/TC 264/WG 16 Reference measurement methods for NOx, SO2, O2, CO and water vapour emissions CEN/TC 264/WG 18 Open path optical methods for the measurement of ambient air quality CEN/TC 264/WG 21 Measurement method for B(a)P in Ambient Air CEN/TC 264/WG 26 Emissions into indoor air CEN/TC 264/WG 27 Air quality - Determination of odour exposure in ambient air by using field inspection CEN/TC 264/WG 28 Measurement of bioaerosols in ambient air and emissions CEN/TC 264/WG 29 Ambient air - Monitoring of genetically modified organisms (GMO) CEN/TC 264/WG 30 Biomonitoring methods with flowering plants CEN/TC 264/WG 31 Biomonitoring methods with mosses and lichens CEN/TC 264/WG 32 Air quality - Determination of the particle number concentration CEN/TC 264/WG 33 Greenhouse gas (GHG) emissions in energy-intensive industries CEN/TC 264/WG 34 Standard method for measurement of NO3, SO42-, CL-, NH4+, Na+, K+, MG2+ and Ca2+ CEN/TC 264/WG 35 EC/OC in PM CEN/TC 264/WG 36 Measurement of stack gas emissions using FTIR instruments CEN/TC 264/WG 37 Predictive Emission Monitoring systems CEN/TC 264/WG 38 Determination of fugitive VOC emissions CEN/TC 264/WG 39 Sampling and analysis of airborne pollen grains and fungal spores Belgian experts in 24 WG on 27, but half of them with only one expert! 12
13 BELGIAN EXPERT FOR AIR Actual ISO normalization SC/WG ISO/TC 146/SC 1/WG 25 ISO/TC 146/SC 1/WG 26 ISO/TC 146/SC 1/WG 27 ISO/TC 146/SC 1/WG 28 SO/TC 146/SC 2/WG 1 ISO/TC 146/SC 2/WG 2 ISO/TC 146/SC 2/WG 3 ISO/TC 146/SC 2/WG 4 ISO/TC 146/SC 2/WG 5 ISO/TC 146/SC 2/WG 7 ISO/TC 146/SC 2/WG 8 ISO/TC 146/SC 2/WG 9 ISO/TC 146/SC 2/WG 10 ISO/TC 146/SC 3/WG 1 ISO/TC 146/SC 3/WG 8 ISO/TC 146/SC 4/WG 2 ISO/TC 146/SC 5/WG 1 ISO/TC 146/SC 5/WG 3 ISO/TC 146/SC 5/WG 4 ISO/TC 146/SC 5/WG 5 ISO/TC 146/SC 5/WG 6 ISO/TC 146/SC 6/WG 4 ISO/TC 146/SC 6/WG 6 ISO/TC 146/SC 6/WG 10 ISO/TC 146/SC 6/WG 13 ISO/TC 146/SC 6/WG 16 ISO/TC 146/SC 6/WG 17 ISO/TC 146/SC 6/WG 18 ISO/TC 146/SC 6/WG 19 ISO/TC 146/SC 6/WG 20 ISO/TC 146/SC 6/WG 21 ISO/TC 146/SC 6/WG 22 Title Greenhouse gases - Automated Measuring Systems (GHG-AMS) Biomass and fossil derived CO2 Selenium Ammonia Particle size-selective sampling and analysis Inorganic particulate matter Gases Organic vapours Inorganic fibres Silica Assessment of contamination of skin and surfaces from airborne chemicals Sampling pump performance Terminology and Quality Control in Workplace Air Determination of asbestos fibre content Determination of ozone - UV method Uncertainty of air quality measurements Wind vanes and rotating anemometers Test methods for comparing the performance of radiation shields and definitions of important Evaluation methods for atmospheric dispersion models Remote atmospheric boundary layer profiling - Test methods for ground based equipment Lidar Asbestos - Mineral fibres Ventilation rate measurement Fungi Joint between ISO/TC 146/SC 6 and ISO/TC 22 WG: Determination of volatile organic Test methods for VOC detectors Sensory testing of indoor air Flame retardants Investigation of constructions Determination of phthalates Strategies for the measurement of airborne particles Brominated flame retardants Belgian experts in only 10 WG on 24 most of the time with only one expert! BELGIAN EXPERT FOR AIR Why do not take part to the normalization process? As a active lab you have a lot of experience, why do not share this knowledge by taking part to the normalization process? - Put your field experience in standard - Represent your country as an expert - Meet other experts and learn for their experience -Create a new network of peoples -Valorised your work true international publication -Money is available for some validation (mandates) -Be inform of future trend and normative imposition -Be reactive to future change in equipment -Passive membership is really affordable 13
14 THANK YOU FOR YOUR ATTENTION 14
BUSINESS PLAN. CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
Business Environment BUSINESS PLAN CEN/TC 137 Business Plan Date: 01.09.04 Version: 2 Approved BP Page: 1 CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
WORK PACKAGE 4 DELIVERABLE D.T4.1.4
WORK PACKAGE 4 DELIVERABLE D.T4.1.4 Strategy to facilitate the integration of Dynamic Lighting into EN 13201 and related regulations Version 1 10-2017. 1. Introduction According to the Technical Report
BUSINESS PLAN CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 162 Business Plan Page: 1 CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY Business Environment CEN/TC 162 is preparing standards
Security Standardisation - Mandate M/487 Jolien van Zetten
Security Standardisation - Mandate M/487 Jolien van Zetten Agenda Standardisation What is it? How does it work? Mandate M/487 to develop security standards Overview Results - CBRNE Relation standardisation
BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION CEN/TC 305 Business Plan Page: 1 Business environment, benefits and priorities EXECUTIVE SUMMARY CEN/TC 305
Standardization in the Construction Sector Sustainability assessment and Environmental Product Declarations
Standardization in the Construction Sector Sustainability assessment and Environmental Product Declarations Gonçalo Ascensão 16 October 2014 ECO Platform EPD European Standardization Organizations (ESOs)
Confused by standards Standards for social alarms
Confused by standards Standards for social alarms Chris Dodd Strategic Development Director Chair of the BSI Technical Committee for Social Alarms Convenor (Chair) of the CENELEC technical committee for
Particle Tracking Analysis for particle counting
Particle Tracking Analysis for particle counting Dr Chairman of ISO TC229 (Nanotechnologies) Director of BREC Solutions ltd RSC Workshop (London,. UK) 24 April 2018 1 Introducing myself Expert duties Chair
Test procedure/ method identification IP 100 (ISO 9096, ČSN EN )
Page 1 of 7 All tests and sampling performed by the laboratory meet the requirements for periodic emission measurement according to ČSN P CEN/TS 15675:2009. The Laboratory is qualified to update standards
EU Best practice of Technical Committees and benefits that could be achieved
EU Best practice of Technical Committees and benefits that could be achieved Ian Greensmith Senior Standards Expert Brussels, 29 th of January 2013 www.inogate.org What is a standard? Standard: document,
Cooperation between EGRC and ISO/TC 82, Mining. A subject worth exploring
Cooperation between EGRC and ISO/TC 82, Mining A subject worth exploring ISO/CS presentation to the UNECE Expert Group on Resource Classification, Seventh Session, 27-29 April 2016 ISO basics What is the
Why participate in standardization work?
1 Why participate in standardization work? Morten Seljeskog / Morten.Seljeskog@sintef.no SINTEF Energi AS/SINTEF Energy Research, Kolbjørn Hejesvei 1a, 7465 TRONDHEIM Tel: +47 73 59 37 29 / Cell: +47 901
BUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY
CEN/TC 79 Business Plan Page: 1 BUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY Scope To prepare European Standards for respiratory protective devices (RPD) for work and rescue
BUSINESS PLAN CEN/TC 142 WOODWORKING MACHINES SAFETY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 142 WOODWORKING MACHINES SAFETY EXECUTIVE SUMMARY Business environment largest in the world, covering more than 50% of the world market. CEN TC 142 activity deals with standardization
BUSINESS PLAN CEN/TC 159 HEARING PROTECTORS EXECUTIVE SUMMARY
Date:2014-07-10 Page: 1 BUSINESS PLAN CEN/TC 159 HEARING PROTECTORS EXECUTIVE SUMMARY Business Environment CEN/TC 159 is preparing standards on: Hearing protectors Safety requirements and testing Hearing
BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY Pumps are widely used in industry and facilities applications at a worldwide level. European pumps production represents a prime part of of the
BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY Business Environment Europe represents about 20% of vehicles of the world market. However the automotive industry is acting globally, the
BUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY Business Environment Europe represents approximately 28,6 % of the world market. The parties involved are: - manufacturers of industrial
BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY Standards to be delivered by this TC cover pipe products for the construction of public, industrial or private
BUSINESS PLAN. CEN/TC 336 BITUMINOUS BINDERS Version 2018 EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 336 BITUMINOUS BINDERS Version 2018 EXECUTIVE SUMMARY BUSINESS ENVIRONMENT The parties interested in the bituminous binder market are the following industries: - the bituminous
BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY Business Environment Standardization of welding by all processes, as well as allied processes; these standards include terminology,
BUSINESS PLAN CEN/TC 249 PLASTICS
Page: 1 BUSINESS PLAN CEN/TC 249 PLASTICS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal, societal and/or
International comparison of validation methods for dust concentration measurement
International comparison of validation methods for dust concentration measurement Validation of dust monitors can be divided into 2 steps: 1. Validation of a generic dust monitor as an instrument (Type
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15027-3 Second edition 2012-11-01 Immersion suits Part 3: Test methods Combinaisons de protection thermique en cas d immersion Partie 3: Méthodes d essai Reference number ISO
Porcelain (Vitreous) Enamel: European and International Standardization
Porcelain (Vitreous) Enamel: European and International Standardization Dr. Ir. Leo Gypen Belgian delegate in EEA, CEN/TC262/WG5 and ISO TC107/WG2 since their creation Vice-president Stichting Email (E:
Flexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 63A Issue date 16 th June 2015 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44 (0)1244
healthy comfort Indoor Air Quality Solutions
healthy comfort Indoor Air Quality Solutions Healthy Climate Indoor Air Quality Solutions The choice for a healthier, more comfortable home Having a comfortable home goes way beyond temperature settings.
Stony Brook University Hospital Environmental Health & Safety Policy & Procedure Manual. EH&S 6-8 Original : 1/00 Revision Date: 3/16/15 Pages 6
Title: Laser Safety Stony Brook University Hospital Environmental Health & Safety Policy & Procedure Manual EH&S 6-8 Original : 1/00 Revision Date: 3/16/15 Pages 6 PURPOSE: SCOPE: To protect University
Flexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 072A Issue date 23 rd March 2018 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44
BUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY Business environment Products Personal fall arresting systems and components Personal equipment
Report on the activities of the ATEX consultant. Xavier Lefebvre. Contract : CENELEC/NA Consultant/2013-1
Report on the activities of the ATEX consultant Xavier Lefebvre Contract : CENELEC/NA Consultant/2013-1 Period covered: from 1 January 2013 to 1 July 2013 1. Attended meetings Date Subject Location 2013.01.28
ISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials
INTERNATIONAL STANDARD ISO 3452-2 First edition 2000-04-01 Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials Essais non destructifs Examen par ressuage Partie 2: Essais des
BSI the UK voice into European and national standards
BSI the UK voice into European and national standards Jessy Mathew Programme Manager Sustainability Sector BSI Copyright 2018 BSI. All rights reserved 1 Contents What are standards? About BSI Standards
Role of Standards in Exploiting Technology and Research
Role of Standards in Exploiting Technology and Research Unit Manager Research Integration, CEN-CENELEC Management Centre Policy Context The Innovation Union, 2010: Standards play an important role for
CEN/TC 207 N N Work programme May Document type: Other committee document. Date of document:
CEN/TC 207 N 1646 CEN/TC 207 Furniture Email of secretary: fabrizio.tacca@uni.com Secretariat: UNI (Italy) N 1646 - Work programme May 2016 Document type: Other committee document Date of document: 2016-05-05
BUSINESS PLAN CEN/TC 239 RESCUE SYSTEMS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 239 RESCUE SYSTEMS EXECUTIVE SUMMARY Business Environment CEN/TC 239 is engaged in the standardization of ambulances as emergency medical vehicles and/or crafts and their associated
Standards for nanotechnologies
Standards for nanotechnologies Dr Peter Hatto, Chairman ISO TC 229, CEN TC 352 and BSI NTI/1 Nanotechnologies standardization committees Director of Research, IonBond Ltd Standards and standardization
Introduction to ISO and ISO membership
Introduction to ISO and ISO membership 2 ISO Mission ISO develops high quality voluntary International Standards which facilitate international exchange of goods and services, support sustainable and equitable
Title: Laser Safety Effective Date: 9/91 Revision: 2/97 Number of Pages: 7
Environmental Health and Safety Manual Policy Number: EH&S 6-8 Title: Laser Safety Effective Date: 9/91 Revision: 2/97 Number of Pages: 7 PURPOSE: SCOPE: To protect University employees against health
CEN System Delegated Decisions Dispatch 33:2016
2016-08-16 Page 1 CEN System Delegated Decisions Dispatch 33:2016 1 CEN/TC 127 Correspondence... 1 2 CEN/TC 147 Correspondence... 9 3 CEN/TC 160 Correspondence... 10 4 CEN/TC 182 Correspondence... 12 5
The Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles
The Process of making European Standards Frank Moore Chairman CEN TC/248 Textiles 1 European Standards CEN & CENELEC systems Standards development process Links to legislation International dimension What
Many different instruments Many different operating principles including: May sample many different gases & vapour From relatively simple to complex
Part 2 Direct Reading Instrumentation Direct Reading Instruments Many different instruments Many different operating principles including: Electrochemical Photoionisation Flame ionisation Chemiluminescence
Ramon 2.2 Radon-Monitor
Ramon 2.2 Radon-Monitor Applications Measurement Modes - Technology - Quality Extratech Engineering, Technology, Software & Training - by 3DLiFe srl Via Torraca, 76-85100 Potenza (PZ) Tel/Fax. (+39) 0971.21.432
Update on European Standardization Work
Update on European Standardization Work 16th International Water Mist Conference 21st & 22nd September 2016 in Vienna, Austria Joachim Böke Minimax Viking GmbH Industriestraße 10/12 23840 Bad Oldesloe
CEN strategies and plans for a global acceptance of the Eurocodes
CEN strategies and plans for a global acceptance of the Eurocodes Gonçalo Ascensão 5th December 2013 Adoption of the Eurocodes in the Balkan Region European Standardization System Links to legislation
BUSINESS PLAN CEN/TC 191 FIXED FIREFIGHTING SYSTEMS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 191 FIXED FIREFIGHTING SYSTEMS CEN/TC 191 Business Plan Date: 2005-09-07 Version: 2 Approved BP Page: 1 EXECUTIVE SUMMARY Business Environment TC191 is responsible for standardization
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13937-3 First edition 2000-04-01 Textiles Tear properties of fabrics Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) Textiles Propriétés
Australian/New Zealand Standard
AS/NZS 1337.1:2010 (Incorporating Amendment No. 1) AS/NZS 1337.1:2010 Australian/New Zealand Standard Personal eye protection Part 1: Eye and face protectors for occupational applications AS/NZS 1337.1:2010
BUSINESS PLAN. CEN/TC 444 Test methods for environmental characterization of solid matrices
Page: 1 BUSINESS PLAN CEN/TC 444 Test methods for environmental characterization of solid matrices EXECUTIVE SUMMARY Scope Standardization of test methods for the environmental characterization of soil,
ACTIVITIES OF THE MEASURING GROUP
ACTIVITIES OF THE MEASURING GROUP TABLE OF CONTENTS 1. Introduction 2. Flow measurements 3. Temperature measurements 3.1 Temperature profile of tunnel kiln loads 3.2 Other temperature measurements 4. Power
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SIRA Certification Service Accredited to ISO/IEC 17065:2012 to provide product conformity Unit 6 Hawarden Industrial Park Hawarden Deeside
BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS
Page:1 BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal,
Relevance of standards for tractors and agricultural machinery. Antoon Vermeulen, CNH Belgium N.V. June pages
Relevance of standards for tractors and agricultural machinery Antoon Vermeulen, CNH Belgium NV June 2012 12 pages Standards in the legislation of the EU New Approach legislation in the European Union
BUSINESS PLAN CEN/TC 72 FIRE DETECTION AND FIRE ALARM SYSTEMS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 72 FIRE DETECTION AND FIRE ALARM SYSTEMS CEN/TC 72 Business Plan Page: 1 EXECUTIVE SUMMARY Scope To prepare standards, harmonised where necessary, to meet the essential requirements
On , CCMC received a proposal from DIN for the creation of a new Technical Committee in the area of Food Authenticity (see Annex 1).
BT N 11281 Draft BT C143/2018 TECHNICAL BOARD CEN/BT by correspondence For vote Issue date: 2018-08-22 According to IR2 Clause 6.1.4 Deadline: 2018-11-20 SUBJECT Establishment of a new TC on Food authenticity
cooperation in standardization Gonçalo Ascensão Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012
Perspectives and benefits of international cooperation in standardization Gonçalo Ascensão ç Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012 CEN & CENELEC systems Links to legislation
Lloyd s Register Type Approval System Test Specification Number 3
Working together for a safer world Lloyd s Register Type Approval System Test Specification Number 3 July 2015 Performance Test Specification for Equipment to be used in Marine Applications: Electric Cables
BUSINESS PLAN CEN/TC 135 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 135 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES EXECUTIVE SUMMARY The business environment relevant for the work of the CEN/TC includes - The entire industry involved
International and European standardization of Nanomaterials
International and European standardization of Nanomaterials Jean-Marc Aublant LNE - France What about standardization of nanotechnologies? Retrospect CEN/BT/WG 166 Nanotechnologies was established in March
Fibre Optic Connector and Component Standards Developments & Key Issues in IEC & CENELEC. Philip C Longhurst Corporate Fibre Optic R & D Manager
Fibre Optic Connector and Component Standards Developments & Key Issues in IEC & CENELEC Philip C Longhurst Corporate Fibre Optic R & D Manager Outline CENELEC TC86BXA work programme IEC SC86B WG 6 and
ISA 18.2 WG8. Purpose Definitions Status. By: Lieven Dubois, Co-chair
ISA 18.2 WG8 Purpose Definitions Status By: Lieven Dubois, Co-chair About the presenter Lieven Dubois Studied Electronic Engineering in Belgium In industrial automation since 1982 First Alarm Management
CEN/TC 442 Decisions taken /16
CEN/TC 442 Building Information Modelling (BIM) CEN/TC 442 Decisions taken 2016-02-15/16 Date: 2016-02-16 Secretariat Reference: CEN/TC 442 N065 SN (Norway) Lisbet Landfald e-mail: lla@standard.no Direct
CEN/TC 442. Building Information Modelling REPORT TO ACE BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442
CEN/TC 442 Building Information Modelling REPORT TO ACE BRUSSELS 2017-11-01 ØIVIND ROOTH, CHAIR CEN/TC442 Norwegian leadership in CEN and ISO 2 2 New structure decided in CEN/TC442 plenary meeting in Dublin
Certificate: / 29 April 2014
Test report: 936/21209885/F of 20 September 2013 Initial certification: 01 April 2014 Date of expiry: 31 March 2019 Publication: BAnz AT 01 April 2014 B12, chapter IV, No. 6.3 Approved application The
Contact: Title: Resolutions of ISO/TC th plenary meeting held on in Tokyo (Japan) Source: TC secretariat. Project(s): Status:
Date 2007-11-26 Supersedes document Reference number ISO/TC 224 N 360 This document is still under study and subject to change. It should not be used for reference purposes. ISO/TC 224 Title: Service activities
Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
21-47 High Street, Feltham, Middlesex, TW13 4UN, UK St laise House Vaughan Street radford West Yorkshire D1 2LL ontact: Mr A R Pullen Tel: +44 (0)1274 738668 Fax: +44 (0)1274 738758 E-Mail: technical@envirocare.org
ISO/TS TECHNICAL SPECIFICATION
Provläsningsexemplar / Preview TECHNICAL SPECIFICATION ISO/TS 22391-7 First edition 2011-11-15 Plastics piping systems for hot and cold water installations Polyethylene of raised temperature resistance
BUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES Business Environment EXECUTIVE SUMMARY The market scenario is the domestic one and product typology concerned is very wide. The products within the
BUSINESS PLAN CEN/TC 215 RESPIRATORY AND ANAESTHETIC EQUIPMENT EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 215 RESPIRATORY AND ANAESTHETIC EQUIPMENT Business environment EXECUTIVE SUMMARY The following European Council New Approach directive and regulation are relevant to the work
BUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY
Page: 1 Business environment BUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY The 5 standards published by CEN/TC 208 since 1996 are used throughout the
BUSINESS PLAN CEN/TC 260 FERTILIZERS AND LIMING MATERIALS
Page: 1 BUSINESS PLAN CEN/TC 260 FERTILIZERS AND LIMING MATERIALS 1 BUSINESS ENVIRONMENT OF THE CEN/TC CEN/TC 260 sets up European Standards for all kinds of fertilizers 1 and liming materials. Standardization
Technical standards to support the evolution of technology enabled care services
Technical standards to support the evolution of technology enabled care services Agenda Technical Special Interest Group Signalling across next generation networks and liaison with Ofcom/NICC Technical
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 25140 First edition 2010-08-01 Stationary source emissions Automatic method for the determination of the methane concentration using flame ionisation detection (FID) Émissions
This document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16429 March 2013 ICS 13.040.40 English Version Stationary source emissions - Sampling and determination of hydrogen chloride
EU flammability standards and ENFIRO
EU flammability standards and ENFIRO Pim Leonards Institute for Environmental Studies, VU University Amsterdam Email: pim.leonards@vu.nl EU research project FP7: 226563 Life Cycle Assessment of Environment-Compatible
Healthy Climate Indoor Air Quality Solutions. Solutions that fit your unique needs
i n d o o r a i r q u a l i t y s o l u t i o n s Healthy Climate Indoor Air Quality Solutions Solutions that fit your unique needs Healthy Climate Indoor Air Quality Solutions Custom, whole-home product
Fundamentals is subdivided into Sources of Radiation, Biological Effects, Mathematics, Chemistry, Physics, and Units and Terminology.
NRRPT Exam Review Class - an intensive 5-day class designed to prepare the candidate to successfully pass the NRRPT Exam. The course concentrates on the basic tools the candidate needs to successfully
BUSINESS PLAN CEN/TC 149 POWER-OPERATED WAREHOUSE EQUIPMENT EXECUTIVE SUMMARY
Pages: 1 BUSINESS PLAN CEN/TC 149 POWER-OPERATED WAREHOUSE EQUIPMENT EXECUTIVE SUMMARY The whole industry from raw materials through the production process to the customer needs material handling technology.
ISO/CEN ACTIVITIES. EURL-Campylobacter workshop 2018 Hanna Skarin
ISO/CEN ACTIVITIES EURL-Campylobacter workshop 2018 Hanna Skarin RELEVANT GROUPS IN ISO AND CEN ISO/TC34/SC9: - ISO: International Standardisation Organisation - TC34: Technical Committee 34 on Food products
A new model for CEN/TC 89 Thermal performance of buildings and building components
Project CEN M/48 phase 2, Revision standards for EPBD CEN/TC 89 and ISO/TC 163/SC 2 Energy and thermal performance of building and building components CEN standards for the energy performance of buildings.
ISO INTERNATIONAL STANDARD. Hydrogen generators using fuel processing technologies Part 1: Safety
INTERNATIONAL STANDARD ISO 16110-1 First edition 2007-03-15 Hydrogen generators using fuel processing technologies Part 1: Safety Générateurs d'hydrogène utilisant les technologies de traitement du carburant
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3059 Third edition 2012-12-01 Non-destructive testing Penetrant testing and magnetic particle testing Viewing conditions Essais non destructifs Contrôles par ressuage et contrôles
Glenside Environmental Services Ltd
Unit 18 Great Island Industrial Park, Ballincollig, Co. Cork. Testing Laboratory Registration number: 322T is accredited by the Irish National Board (INAB) to undertake testing as detailed in the Schedule
ISO 3999 INTERNATIONAL STANDARD. Radiation protection Apparatus for industrial gamma radiography Specifications for performance, design and tests
INTERNATIONAL STANDARD ISO 3999 Second edition 2004-12-15 Radiation protection Apparatus for industrial gamma radiography Specifications for performance, design and tests Radioprotection Appareils pour
This document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1187 January 2012 ICS 13.220.50; 91.060.20 Supersedes ENV 1187:2002 English Version Test methods for external fire exposure
WG IV/ CEN/TC 251 WG IV. HEALTH INFORMATICS - Technology for Interoperability SECRETARIAT: S&SSP at NHSIA
WG IV/ Saved: 13 October 2003 N03-08 Page 1 of 5 CEN/TC 251 WG IV HEALTH INFORMATICS - Technology for Interoperability SECRETARIAT: S&SSP at NHSIA TITLE/ SUBJECT: SOURCE: WGIV and ISO TC215 WG2.1 (devices)
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13937-2 First edition 2000-04-01 Textiles Tear properties of fabrics Part 2: Determination of tear force of trousershaped test specimens (Single tear method) Textiles Propriétés
ISO Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Laser assembly
INTERNATIONAL STANDARD ISO 22827-1 First edition 2005-10-15 Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 1: Laser assembly Essais de réception pour
BS 7913 Launch event. 10 March 2014 Somerset House, London
BS 7913 Launch event 10 March 2014 Somerset House, London Conservation of cultural heritage and the importance of standards Tim Yates, Chair of British Standards Committee B/560 Copyright 2014 BSI. All
Introducing the most technically advanced indoor air treatment system
Introducing the most technically advanced indoor air treatment system Sleep better and breathe easier with clean air In your home There are many factors that adversely affect the indoor air quality of
LASER SAFETY TRAINING CATALOG LASER INSTITUTE OF AMERICA S MAKE LASER SAFETY YOUR PRIORITY LASER
MAKE LASER SAFETY YOUR PRIORITY LASER INSTITUTE OF AMERICA S LASER SAFETY TRAINING CATALOG 1.800.34.LASER www.lia.org 13501 Ingenuity Dr., Suite 128 Orlando, FL 32826 Phone: +1.407.380.1553 Fax: +1.407.380.5588
BUSINESS PLAN CEN/TC 231 MECHANICAL VIBRATION AND SHOCK EXECUTIVE SUMMARY
Business Environment BUSINESS PLAN CEN/TC 231 MECHANICAL VIBRATION AND SHOCK EXECUTIVE SUMMARY CEN/TC 231 Business Plan Page: 1 In Europe, a large number of machines generating exposure to mechanical hand-arm-vibration
ISO/TS TECHNICAL SPECIFICATION. Fire detection and alarm systems Part 9: Test fires for fire detectors
TECHNICAL SPECIFICATION ISO/TS 7240-9 First edition 2006-01-01 Fire detection and alarm systems Part 9: Test fires for fire detectors Systèmes de détection et d'alarme d'incendie Partie 9: Essais sur foyers
BUSINESS PLAN CEN/TC 145 PLASTICS AND RUBBER MACHINES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 145 PLASTICS AND RUBBER MACHINES EXECUTIVE SUMMARY Business Environment The European plastics and rubber machinery industry represented in 2015 a total of around 1,000 companies,
BUSINESS PLAN CEN/TC 194 USTENSILE IN CONTACT WITH FOOD EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 194 USTENSILE IN CONTACT WITH FOOD EXECUTIVE SUMMARY Business environment The general title of CEN/TC 194 Utensils in contact with food actually covers a number of distinct
A Notification under Article 12 of Regulation (EU) No 1025/2012 1
EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Sustainable Growth and EU 2020 Standards for Boosting Competitiveness Brussels, 02/07/2014 A Notification under Article 12 of Regulation
BUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY The main fields CEN/TC 143 deals with safety of metal cutting machine tools, metal forming machine tools, electro-discharge machines
Name title. Event Date Venue
Name title Event Date Venue Summary Overview of the South African National Committee IEC Conformity assessment systems IEC Young professional programme IEC in Africa AFSEC How to get involved Structure
Safety standard developments within ASHRAE 15 and ISO UNEP workshop on safety standards, Bangkok
Safety standard developments within ASHRAE 15 and ISO 5149 Jay Kohler 10 July 2017 Topics for this presentation Purpose of standards and principles underpinning them Status of ASHRAE Standard 15 and ISO
Gas Temperature Measurements with High Temporal Resolution
THE GERG ACADEMIC NETWORK EVENT 2010 3 & 4 June 2010 Brussels Gas Temperature Measurements with High Temporal Resolution Supervisor: PhD Student: Dr. Alexander Fateev Vadim Evseev DENMARK Introduction