ARRAN LED LED FLOODLIGHT. Standard Specification. Features

Transcription

1 ARRAN LED LED FLOODLIGHT The Arran LED floodlight range is low energy with an instant on output and up to 130,000 maintenance free hours. Specifically designed for applications where moisture, dirt or dust are present, the floodlight is highly vibration resistant and can be used for industrial applications. Standard Specification Features Enclosure Entry Termination Installation Control Gear Luminaire Efficacy Ingress Protection Aluminium alloy with epoxy powder finish 2 x M20 cable entries 3 core 6mm² max. conductor with looping Stirrup mounting Electronic driver >100 lm/w IP66 Instant on crisp white light output Colour temperature 5000K (CCT) Highly energy efficient 130,000 maintenance free 25 C Less power used than HID lamps High ingress protection Low temperature applications to -50 C Surge Protection 20kV Electrical Supply V AC 50/60Hz

2 INDUSTRIAL and and MARINE APPLICATIONS Std. Cat No. Power Consumption Delivered Output Ambient C Weight ARRI/06L/LE 60W 5800 lm -50 to kg ARRI/10L/LE 70W 9710 lm -50 to kg ARRI/11L/LE 85W lm -50 to kg ARRI/15L/LE 125W lm -50 to kg Options - Suffix to Catalogue No. /M25 M25 cable entries /DC DC voltage (60W only) Ø Accessories Should be ordered separately Pole mounting bracket assembly Wire guard Anti glare shield Catalogue Order Code Product design and specifications are subject to change without notice, please check the Chalmit website for latest specifications. November 2014 Rev 2 Chalmit, PO BOX 5575, Glasgow G52 9AP Tel: +44(0) Fax: +44(0) info@chalmit.com

3 ARRAN Ex n LED FLOODLIGHT 1 The Arran LED floodlight range is low energy with an instant on output and 80,000 maintenance free hours to L70 (70% initial lumens). Specifically designed for applications where moisture, dirt or dust are present, the floodlight is highly vibration resistant and can be used in locations where flammable vapours, gases or combustible dusts exist. Type of Protection ATEX Classification Area Classification Certificate Coding Enclosure Entry Termination Installation Control Gear Luminaire Efficacy Ingress Protection Surge Protection Electrical Supply Standard Specification Ex na (Non Sparking) Group II Category 3 GD Zone 2 and Zone 22 areas to EN and EN with installation to EN IECEx CSA ATEX certificate pending Ex na II Refer to table for T Class & Ambient Aluminium alloy with epoxy powder finish 2 x M20 cable entries 3 core 6mm² max. conductor with looping Stirrup mounting Electronic driver >100 lm/w IP66 20kV V AC 50/60Hz Features Instant on crisp white light output Colour temperature 5000K (CCT) Highly energy efficient 80,000 maintenance free hours 70% initial lumens Less power used than HID lamps High ingress protection Low temperature applications to -50 C

4 ATEX CATEGORY 3 ZONE 2 & 22 APPLICATIONS 2 Std. Cat No. Power Consumption Delivered Output TClass Ambient C Weight ARRN/06L/LE 60W 5800 lm ARRN/10L/LE 70W 9710 lm ARRN/11L/LE 85W lm ARRN/15L/LE 125W lm T6-50 to +40 T5-50 to +55 T6-50 to +40 T5-50 to +55 T6-50 to +40 T5-50 to +55 T6-50 to +40 T5-50 to kg 13kg 13kg 13kg Options - Suffix to Catalogue No. /M25 M25 cable entries /DC DC voltage (60W only) Ø Accessories Should be ordered separately Pole mounting bracket assembly Wire guard Anti glare shield Catalogue Order Code Product design and specifications are subject to change without notice, please check the Chalmit website for latest specifications. August 2014 Rev 2 Chalmit, PO BOX 5575, Glasgow G52 9AP Tel: +44(0) Fax: +44(0) info@chalmit.com

5 SCOTIAEx Ex Ex d d e e LED LED FLOODLIGHT The ScotiaEx LED Zone 1 floodlight range is low energy with an instant on output and 110,000 maintenance free hours. Specifically designed for applications where moisture, dirt or dust are present, the floodlight is highly vibration resistant and can be used in locations where flammable vapours, gases or combustible dusts exist. Standard Specification Features Type of Protection ATEX Classification Area Classification Certificate Coding Enclosure Entry Termination Installation Control Gear Luminaire Efficacy Ingress Protection Surge Protection Electrical Supply Ex d e (Flameproof, Increased Safety) Dust protected enclosure Group II Category 2 GD Zone 1 and Zone 21 areas to EN and EN with installation to EN Gas Groups IIA, IIB + H2 CML 14ATEX1086X Ex d e IIB + H2 Ex tb IIIC Refer to table for T Class & Ambient Aluminium Alloy LM6 2 x M20 cable entries 3 core 6mm² max. conductor with looping Stirrup mounting Electronic driver >80 lm/w IP66 20kV V AC 50/60Hz Instant on crisp white light ouput Colour temperature 5000K (CCT) Highly energy efficient 110,000 maintenance free 25 C Less power used than HID lamps High ingress protection Low temperature applications to -50 C

6 ATEX CATEGORY 2 2 ZONE 1 & 1 & APPLICATIONS Std. Cat No. Power Consumption Delivered Output TClass T C (Dust) Ambient C Weight SCOD/07L/LE 90W 7182 lm SCOD/08L/LE 105W 8362 lm SCOD/11L/LE 110W lm SCOD/12L/LE 125W lm Note: For alternative beam options, please contact Chalmit Internal Sales. T to +40 T to +55 T to +40 T to +55 T to +40 T to +55 T to +40 T to kg 21kg 21kg 21kg Options - Suffix to Catalogue No. /M25 M25 cable entries /LT Low temperature to -50 C (Gas groups IIA and IIB only) Accessories Should be ordered separately Pole mounting bracket assembly Wire guard Catalogue Order Code Anti glare shield Product design and specifications are subject to change without notice, please check the Chalmit website for latest specifications. November 2014 Rev 1 Chalmit, PO BOX 5575, Glasgow G52 9AP Tel: +44(0) Fax: +44(0) info@chalmit.com

7 SOLAS 1 EMERGENCY LED FLOODLIGHT Ex de PROTECTION SOLAS is a new generation of LED luminaire. Using ultra bright LEDs, it produces a whiter more focused light that an equivalent 70W HPS lamp. Available with a self contained battery, it can also be used for backup emergency lighting. The long life of the LEDs makes it possible to use the luminaire continuously in normal operation (maintained), whilst still ensuring illumination in the event of a power failure. Alternatively it can simply be used as an emergency luminaire (non-maintained). The unique characteristics of the SOLAS offer a flexible luminaire that is as well suited to providing focused area lighting, illuminating safety critical areas in an emergency situation. A remote inhibition facility is available on all emergency versions. The range is available with options for operation down to -55 C making it ideal for low temperature applications. Solas with external switch Standard Specification Features Type of Protection ATEX Classification Area Classification Certificate Coding Enclosure Reflector Entry Termination Installation Control Gear Batteries Light Source Burning Position Ingress Protection Electrical Supply Emergency Light Duration Ex de (Flameproof & Increased Safety) Group II Category GD Zone 1 & 2 areas to EN with installation to EN ATEX Certification Baseefa11ATEX0090 IECEx Certification IECEx BAS Ex II 2 GD Ex d e IIB T5 Gb Ex tb IIIC T100 C Db IP6X Aluminium alloy LM6 Toughened glass window All fastenings 316 stainless steel 2 x M20 cable entries - Non-emergency version: looping for 4mm² cable Emergency version: single entry only for 4mm² cable 4 core 4mm² max. Stirrup mounted Electronic Internal Rechargeable Ni-Cad 34 High power Light Emitting Diodes (LEDs) Universal IP66/67 to EN V 50/60Hz 90 minutes (100% output) Maintained as standard Ex e terminal chamber No re-lamping required - over 60,000 hours continuous operation Low ambient temperatures Non-maintained or Maintained modes Output of over 4000 lumens comparable with 70W HPS floodlight Emergency Inhibition

8 ATEX CATEGORY 2 ZONE 1 APPLICATIONS 2 Std. Cat No. Wattage Lamp TClass T C (Dust) Ambient C Weight SOLD/034/LE 34W Light Emitting Diodes T to kg SOLD/034/LE/EM 34W Light Emitting Diodes T to kg SOLD/034/LE/EM/NM 34W Light Emitting Diodes T to kg Options - Suffix to Catalogue No. /M25 M25 cable entries /3H 3 hour emergency operation (50% output) /P PTFE coating /SC Screwed connections (minimum temp changes to -50 C) /N /NM /LT Narrow beam spread Non-maintained emergency version Low temperature (emergency only) Non-maintained -55 to +55 C Maintained -55 to +45 C Non emergency version: looping for up to 6mm² cable Non maintained emergency: single entry only for up to 6mm² cable Maintained emergency version: screwed connections not available / V Supply 300 CRS (VARIOUS MOUNTING HOLES MAY BE ADDED) 14mm DIA THRU HOLES - 2 OFF VIEW SHOWING POLE CLAMP ARRANGEMENT SUITABLE FOR 42-64MM DIA POLES (BRACKET PART No: S ) Ø406 Accessories Should be ordered separately Catalogue Order Code Pole mounting bracket S Wire guard S Remote switches are available upon request, please contact technical sales (techsupport@chalmit.com) Product design and specifications are subject to change without notice, please check the Chalmit website for latest specifications. Chalmit, PO BOX 5575, Glasgow G52 9AP Tel: +44(0) Fax: +44(0) info@chalmit.com Oct Rev 6

9 NexLED E Ex e ib mb EMERGENCY 64 NexLED with Exit Sign kit The NexLED emergency provides emergency battery backup to ensure continued operation in the event of a power outage. The emergency version benefits from the same features as the standard NexLED and is available as a special low temperature version for operation down to -45 C. Coloured LED options are also available. NexLED with green LED s Standard Specification Features Type of Protection ATEX Classification Area Classification Certificate Coding Enclosure Reflector Entry Termination Installation Light Source Control Gear Burning Position Ingress Protection Battery Emergency Duration Electrical Supply Ex e ib mb (Increased Safety, Intrisically Safe Encapsulated) Dust protected enclosure Group II Category 2 GD Zone 1 and Zone 21 areas to EN and EN with installation to EN EC Type Examination Certificate Baseefa04ATEX0245 IEC Ex BAS II 2 GD Ex e ib mb IIC T4 Aluminium alloy LM6 to BS 1490 (AC44100) with toughened glass and silicone gasket Brushed aluminium 2 x M20 cable entries 4 core 4mm² max conductor with looping Surface mounted, 4 mounting holes located outside of seal 1W light emitting diodes. Colour: white Electronic Universal IP66/67 to EN Ni-Cd (6V) 8W version - 90 minutes 2W version - 3 hours V AC/DC Installation to gas groups IIA, IIB and IIC Highly visible, instant light Easy to install and maintain Ultra long life, no relamping required Very low power consumption 100% output in emergency mode (Up to 3 hours) Rechargable Ni-Cd batteries with charging indication Compatible with UPS systems International Approvals ATEX and GOST IECEx Compliant

10 ATEX CATEGORY 2 ZONE 1 & 21 APPLICATIONS 65 Std. Cat No. Wattage Light Source TClass T C (Dust) Ambient C Weight NELE/201/LE/EM 2W Light Emitting Diode T to kg NELE/801/LE/EM 8W Light Emitting Diode T to kg Options - Suffix to Catalogue No. /RDE Red LED s /ADE Amber LED s /GDE Green LED s /LT Low temperature -45 C to +55 C /BDE Blue LED s /IEC Supplied with IECEx certification label Accessories Should be ordered separately Catalogue Order Code Exit sign kit (supplied with - up, down, left and right labels*) * Other signage options available upon request, please contact technical sales (techsupport@chalmit.com) SNEL Product design and specifications are subject to change without notice, please check the Chalmit website for latest specifications.

11 NexLED LED Bulkhead 116 NexLED with Exit Sign kit The NexLED bulkhead utilises the latest LED technology to provide instant illumination. The NexLED requires no re-lamping making it virtually maintenance free and unaffected by low temperatures. This combination makes the NexLED ideal for extreme environmental applications. Coloured LED options are also available. NexLED with green LED s Standard Specification Features Enclosure Reflector Entry Termination Installation Lamp Type Cast aluminium with toughened glass and silicone gasket Brushed aluminium 3 x M20 cable entries 4 core 4mm² max conductor with looping Surface mounted, 4 mounting holes located outside of seal 2 x 1W light emitting diodes or 8 x 1W light emitting diodes. Colour: white Highly visible, instant light Easy to install and maintain Ultra long life, no relamping required Very low power consumption 100% output in emergency mode (Up to 3 hours) Rechargable Ni-mH batteries with charging indication Compatible with UPS systems Control Gear Electronic Burning Position Universal Ingress Protection IP66/67 to EN Emergency Duration 3 hours (emergency models) Electrical Supply V ac/dc

12 INDUSTRIAL and MARINE APPLICATIONS 117 Std. Cat No. Wattage Lamp Type Ambient C Weight NELI/201/LE 2W Light Emitting Diode -20 to kg NELI/801/LE 8W Light Emitting Diode -20 to kg NELI/201/LE/EM 2W Light Emitting Diode -20 to kg NELI/801/LE/EM 8W Light Emitting Diode -20 to kg Options - Suffix to Catalogue No. /RDE Red LED s /ADE Amber LED s /GDE Green LED s /LT Low temperature -45 C to +45 C /BDE Blue LED s Accessories Should be ordered separately Green exit sign kit (4 labels - up, down, left and right) Catalogue Order Code SNEL Product design and specifications are subject to change without notice, please check the Chalmit website for latest specifications.

13 STARLINE LED 1 STREET LANTERN The Starline LED perfectly combines innovations in heat management, optical performance and energy saving in a sleek exterior. The luminaire minimises energy and operating cost by reducing overlighting; resulting in very low thermal resistance high power LEDs that give exceptionally low lumen depreciation over life. The ultimate solution to replace traditional HID sources with versatility and reliability. The low profile appearance and low weight allows the Starline LED to be safely installed on existing column infrastructure. Standard Specification Features Ingress Protection Enclosure IP66 Die cast aluminium alloy marine grade polyester powder coat paint Slim, elegant design Latest generation high flux density LED LED Colour Diffuser Reflector Neutral white (CCT = 4000K) Flat glass, full cut off Highly specular aluminium, > 95% total reflectance Superior luminaire efficacy up to 1101 lm/w Maximised savings on energy and maintenance costs Dark sky friendly, no upward light Installation Control Gear Windage Electrical Supply Universal spigot cap to suit 34-42mm diameter Side entry as standard High efficiency electronic driver 0.06m² V 50/60Hz Lightweight and low windage allowing retrofit onto existing columns Colour Rendering Index >70 L80 = 90,000hrs (700mA, Ta = 15ºC) Suitable from -40ºC to +55ºC (dependant on driver current)

14 INDUSTRIAL APPLICATIONS 2 Std. Cat No. Luminaire Power Delivered Output Driver Current Weight STAI/088/LE 88W 9591 lm 200mA 13.8kg STAI/149/LE 149W lm 350mA 13.8kg STAI/211/LE 211W lm 500mA 15.0kg STAI/296/LE 296W lm 700mA 15.0kg Intelligent dimming systems are available. For further information please contact technical sales (techsupport@chalmit.com) Options - Suffix to Catalogue No. /PT Post top universal spigot top 60-76mm diameter /W Wide beam Product design and specifications are subject to change without notice, please check the Chalmit website for latest specifications. Chalmit PO BOX 5575, Glasgow G52 9AP Tel: +44(0) Fax: +44(0) info@chalmit.com Sept 2013 Revision 2