Modular & linear architectural lighting for residential and commercial environments.

Size: px

Start display at page:

Download "Modular & linear architectural lighting for residential and commercial environments."

Oswald Willis
6 years ago
Views:

1 THIN Lighting System Modular & linear architectural lighting for residential and commercial environments.

2 THIN System Product Guide AP P L I CATI O NS : S U S PE N S IO N Office Lighting Suspended Task Lighting The THIN

office environments. Hand-finished solid brass feels precise and warm.

and high CRI mean the light is focused and high quality.

elegant, low visual impact option for illuminating precious artworks and objects.

2 2 THIN System Product Guide AP P L I CATI O NS : S U S PE N S IO N Office Lighting Suspended Task Lighting The THIN System includes Suspension, Surface Mount and Task lighting for an integrated, functional, minimal look that fits today s office environments. Hand-finished solid brass feels precise and warm. The rotatable Light Segments allow the fixture to aim light on a countertop or work surface, and the 40 degree beam angle and high CRI mean the light is focused and high quality. Display Lighting Residential The combination of a 1/2 diameter profile and fully rotatable Light Segments make this an elegant, low visual impact option for illuminating precious artworks and objects. A 40 degree beam angle keeps light where it is needed. Available in multiple luxury finishes, the all-brass THIN System feels appropriate next to high-end furniture pieces in a residential setting. info@juniper-design.com rd Street, Unit 11 Brooklyn, NY 11232

3 FEATURES & BENEFITS: SUSPENSION THIN System Product Guide 3 cutaway showing connectors Magnetic Connectors Slim and elegant, the THIN System Suspension is held by a clever magnetic connector system. This allows for easy installation, long runs, and freely rotatable Light Segments. Direct & Indirect Rotating Segments allow for direct or indirect light from the same fixture. Additional Features: Quality Light 3000K and 90CRI standard 959 lumens per lumens per 24 segment Simple Installation Whole-inch spacing, rotatable Light Segments, snap-in magnetic connectors, and 24VDC low-voltage wiring make install easy. Minimal Profile 1/2 [12.7mm] diameter Light Segments allow the fixture to hang lower in the room without obstructing sightlines. This means light where it is needed, creating more intimate, thoughtful spaces. Luxury Finishes & Materials Raw Brass, Satin Nickel, and Black Oxide finishes complement high-end interior construction. Brass and acrylic are sturdy and long-wearing. Configurability Constant-voltage system means multiple Light Segments can be powered from one driver, simplifying system design. Multiple driver options are available to meet most dimming requirements.

APPLICATIONS: SURFACE MOUNT THIN System Product Guide 4 Under Cabinet

easily integrated into display settings.

Picture Light 180mm Standoffs are designed for lighting artwork.

4 APPLICATIONS: SURFACE MOUNT THIN System Product Guide 4 Under Cabinet Lighting 45mm Standoffs are perfect for undercabinet applications, unobtrusive and elegant. Retail Display Configurable and extendable low voltage light modules are easily integrated into display settings. High CRI LEDs make products look their best. Picture Light 180mm Standoffs are designed for lighting artwork. Plugin and Low Voltage Direct installation options fit multiple situations. Bathroom Vanity ETL Listed, damp location rated for bathroom vanity use. The Light Segments are infinitely rotatable for perfect light angles.

THIN System Product Guide 5 FEATURES & BENEFITS: SURFACE MOUNT cutaway showing connectors Magnetic Connectors The low-voltage magnetic connectors incorporated into the Light Segments are incredibly

Multiple Standoff Heights 45mm, 90mm, and 180mm Standoffs allow for a range of applications, from undercabinet and soffit lighting to retail display, library stacks, and general wall-washing.

and 24VDC low-voltage wiring make install easy. The constant-voltage system permits multiple Light Segments to be powered from one driver, simplifying system design.

5 THIN System Product Guide 5 FEATURES & BENEFITS: SURFACE MOUNT cutaway showing connectors Magnetic Connectors The low-voltage magnetic connectors incorporated into the Light Segments are incredibly functional - the lighting direction can be rotated when the fixture is lit, and they make installation easy and intuitive. Multiple Standoff Heights 45mm, 90mm, and 180mm Standoffs allow for a range of applications, from undercabinet and soffit lighting to retail display, library stacks, and general wall-washing. Additional Features: Quality Light 3000K and 90CRI standard 959 lumens per lumens per 24 segment Simple Installation Whole-inch spacing, rotatable Light Segments, snapin magnetic connectors, and 24VDC low-voltage wiring make install easy. The constant-voltage system permits multiple Light Segments to be powered from one driver, simplifying system design. Luxury Finishes & Materials Raw Brass, Satin Nickel, and Black Oxide finishes complement high-end interior construction. Brass and acrylic are sturdy and long-wearing. Rotatable Light Segments The magnetic connectors mean that one fixture can be configured to wash light up, down, or back on the wall. A multiple segment fixture can have segments illuminating different things. Configurability Constant-voltage system means multiple Light Segments can be powered from one driver, simplifying system design. Multiple driver options are available to meet most dimming requirements.

6 TECHNICAL THIN Suspension THIN System Product Guide 6 0.7in 1.7cm 6.1in 15.4cm 0.5in [1.2cm] segment 0.7in [1.7cm] connector 1.5in [3.7cm] Optional Centered Canopy 1.5in [3.7cm] 0.7in 1.7cm 110.8in 281.5cm 36.0in 91.4cm 24in and 36in Light Segments may be combined in the same fixture Standard max length per fixture is (3) 36 Light Segments 110.8in [281.5cm] For longer runs, please contact Juniper Clear Lens 40 degree beam angle Ceiling Gripper 0.5in dia Local Driver Canopy 6.5in dia x 2.4in Remote Driver Canopy 5in dia x 0.5in ILLUMINATION 3000K and 90CRI standard 24 Segment 621 lm delivered / 8.0W 36 Segment 959 lm delivered / 12.3W 78 lm/watt with clear acrylic lens 50,000 hrs LED life L80 POWER 24VDC output Class 2 constant voltage driver 120VAC input voltage Contact Juniper for alternate inputs FINISHES Raw Brass, Black Oxide, Satin Nickel MATERIALS Solid brass, PMMA acrylic CERTIFICATIONS ETL Listed to UL 1598 & 2108, CSA std. Damp Location Rated DIMMING TRIAC/Forward Phase/Leading-edge Juniper recommends Lutron DVCL- 253P dimmers See Power Supply section for details Contact Juniper for alternate requirements MOUNTING 9.8ft (3m) 1/16 aircraft cable, field adjustable 16.4ft (5m) 18AWG CMP black cord, field adjustable SYSTEM RUN Limited by driver wattage only GENERAL INFORMATION Designed by Peter Bristol & Juniper Assembled in USA

7 THIN System Product Guide 7 BUILD A SPECIFICATION THIN Suspension SERIES FINISH SEGMENTS JPR-THES C B - SAMPLE SKU: JPR-THES CB-L6A Raw Brass, (3) 36 segments, local in-canopy 40W Standard power supply (3 X 9.4W = 28.2W total) SAMPLE SKU: JPR-THES CB-R5F Black Oxide, (1) 36 segment, (1) 24 segment, remote 40W Lutron power supply with 5 canopy LENS CORD LOCAL/REMOTE CANOPY POWER SUPPLY LOCAL/REMOTE (POWER SUPPLY LOCATION) 01 Raw Brass 02 Black Oxide 03 Satin Nickel CODE DEFINITIONS FINISHES 01 Raw Brass 02 Black Oxide 03 Satin Nickel SEGMENTS 0 no segment 2 24 inch segment lm delivered / 6.1W 3 36 inch segment lm delivered / 9.4W note: each digit represents a single segment, e.g is (1) 24 segment and (1) 36 segment Contact Juniper for custom segment lengths LENS C Clear - 40 degree beam angle CORD B Black 18AWG plenum-rated (CMP) S Clear-jacketed 22AWG side-by-side silver L Local Power Supply - pre-installed in canopy R Remote Power Supply - separately located near fixture in accessible location, connected via low-voltage Class 2 wiring supplied by electrician, use 5 5 x 0.5 round canopy CANOPY round canopy (for local power supply) 5 5 x 0.5 round canopy (covers junction box) X no canopy POWER SUPPLY - 24VDC CV OUTPUT A Standard 40W - TRIAC/Forward Phase Dims to 5%, 120 VAC B Standard 20W - TRIAC/Forward Phase Dims to 5%, 120 VAC C Standard 12W - TRIAC/Forward Phase Dims to 20%, 120 VAC note: for best dimming, Standard drivers should be matched to total fixture wattage. Standard drivers are ETL Listed, for remote use enclosure E Lutron 40W Local - TRIAC/Forward Phase Dims to 1%, 120 VAC input F Lutron 40W Remote - UL Listed, TRIAC/Forward Phase Dims to 1%, 120 VAC input note: for VAC input, Lutron 3-wire/Ecosystem Dimming drivers available (up to 96W) X No power supply Juniper recommends Lutron DVCL-253P dimmers Contact Juniper for alternate dimming requirements Project Type Notes

8 BRIGHT - BRIGHT + THIN System Product Guide 8 TECHNICAL THIN Surface Mount 1.9in [45mm] 3.5in [90mm] 7.1in [180mm] 0.5in [1.2cm] segment 1.2in [3.0cm] standoff 1.5in [3.7cm] 1.5in [3.7cm] 24in and 36in Light Segments may be combined in the same fixture Standard max length per fixture is (3) 36 Light Segments 110.8in [281.5cm] For longer runs, please contact Juniper 100% 80% 60% 40% 20% 10% Clear Lens 40 degree beam angle Junction Box Cover Plate 5in dia x 0.5in Plug-in Power Supply with RF Remote Control Dimmer, Holder, and Cord Wrap ILLUMINATION FINISHES MOUNTING 3000K and 90CRI standard 24 Segment 621 lm delivered / 8.0W 36 Segment 959 lm delivered / 12.3W 78 lm/watt with clear acrylic lens 50,000 hrs LED life L80 POWER 120VAC Input Voltage 24VDC Class 2 Constant Voltage Contact Juniper for alternate inputs Raw Brass, Black Oxide, Satin Nickel MATERIALS Solid brass, PMMA acrylic CERTIFICATIONS ETL Listed to UL 1598 & 2108, CSA std. Damp Location Rated DIMMING TRIAC/Forward Phase/Leading-edge Juniper recommends Lutron DVCL- 253P dimmers See Power Supply section for details Contact Juniper for alternate requirements Wall brackets mount directly to drywall Optional junction box cover plate available SYSTEM RUN Limited by driver wattage only 2 X 18AWG in-wall rated cable recommended for remote installation GENERAL INFORMATION Designed by Peter Bristol & Juniper Assembled in USA

THIN System Product Guide 9 BUILD A SPECIFICATION THIN Surface Mount SERIES FINISH SEGMENTS STANDOFFS JPR-THEW - 0-0 0 0 - - C - SAMPLE SKU: JPR-THEW-01-000222-090-C-RXC Raw Brass, (3) 24 segments,

3W total) SAMPLE SKU: JPR-THEW-03-000003-180-C-SXG Satin Nickel, (1) 36 segment, 180mm standoffs, plug-in power supply with remote control LENS LOCAL/REMOTE CANOPY POWER SUPPLY CODE DEFINITIONS

9 THIN System Product Guide 9 BUILD A SPECIFICATION THIN Surface Mount SERIES FINISH SEGMENTS STANDOFFS JPR-THEW C - SAMPLE SKU: JPR-THEW C-RXC Raw Brass, (3) 24 segments, 90mm standoffs, remote power supply, no cover plate, 20W power supply (3 x 6.1W = 18.3W total) SAMPLE SKU: JPR-THEW C-SXG Satin Nickel, (1) 36 segment, 180mm standoffs, plug-in power supply with remote control LENS LOCAL/REMOTE CANOPY POWER SUPPLY CODE DEFINITIONS LOCAL/REMOTE (POWER SUPPLY LOCATION) 01 Raw Brass 02 Black Oxide 03 Satin Nickel R Remote Power Supply Location - separately located near fixture in accessible location, connected via low-voltage Class 2 wiring supplied by electrician S Plug-in Power Supply Location - plugs into outlet, includes RF remote control dimmer, and 3 meters of cord - requires X and G below, i.e. -SXG *not available with 045 FINISHES 01 Raw Brass 02 Black Oxide 03 Satin Nickel SEGMENTS 0 no segment 2 24 inch segment lm delivered / 6.1W 3 36 inch segment lm delivered / 9.4W note: each digit represents a single segment, e.g is (1) 24 segment and (1) 36 segment, is (3) 36 segments Contact Juniper for custom segment lengths STANDOFF LENGTH mm Standoffs - for undercabinet mm Standoffs - for general wall-wash and display mm Standoffs - for picture lighting LENS C Clear - 40 degree beam angle HARDWARE 5 5 x 0.5 round cover plate (covers junction box) X no cover plate (for direct DC or plug-in) POWER SUPPLY - 24VDC CV OUTPUT A Standard 40W - TRIAC/Forward Phase Dims to 5%, 120 VAC B Standard 20W - TRIAC/Forward Phase Dims to 5%, 120 VAC C Standard 12W - TRIAC/Forward Phase Dims to 20%, 120 VAC note:for best dimming, Standard drivers should be matched to total fixture wattage. Standard drivers are ETL Listed, for remote use enclosure F Lutron 40W Remote - UL Listed, TRIAC/Forward Phase Dims to 1%, 120 VAC input note: for VAC input, Lutron 3-wire/Ecosystem Dimming drivers available (up to 96W) G 24VDC 36W Plug-in Power Supply X no power supply Juniper recommends Lutron DVCL-253P dimmers Contact Juniper for alternate dimming requirements Project Type Notes

Modular & linear architectural lighting for residential and commercial environments.

THIN Lighting System Modular & linear architectural lighting for residential and commercial environments. 2 THIN System Product Guide A PPLICA T I O N S: SUSP E N SI O N Office Lighting Suspended Task