Equipment. Application of refrigerants and heat transfer fluids Application of brazing alloys Application of insulation EQUIPMENT

Transcription

1 Matériels et outillages Mise en œuvre des fluides frigorigènes Matériels de transfert et de récupération Balances Appareils de mesure et de contrôle Pompes à vide Manifolds Flexibles et raccords Outillages Détection des fuites Mise en œuvre des frigoporteurs et caloporteurs Mise en œuvre de la brasure Mise en œuvre isolation / étanchéité Equipment Using refrigerant fluids - Transfer and recovery equipment - Scales - Measuring and checking devices - Vacuum pumps - Analyser - Manifolds - Hoses and connectors - Tools - Detecting leaks Application of refrigerants and heat transfer fluids Application of brazing alloys Application of insulation

2 Climalife Recommendations Commercial refrigeration - Industrial refrigeration - Air conditioning For refrigerants Recovery / transfer Recovery unit Recover XLT Scales Electronic scale 50 kg / Electronic scale 120 kg / Scale DRM Measuring and checking Digital vacuum gauge Contact thermometer DT 1630 / Thermometer DMT 123 Relief valve D 60 Evacuation Super Evac Pump 95 or 142 l/min Manifolds Manifold Titan / Manifold DH Clim Portable leak detection Leak detector Tek-Mate / Leak detector DDH2 UV / Leak detector HFC 92 / Leak detector XP 1 / Leak Detector D-Tek Select Fixed leak detection Environment control device MURCO MGD / IAM System analyser Electronic analyser For oils Universal pump For heat transfer fluids KAPPA 15 diaphragm pump Universal pump Refractometer For brazing alloys Relief valve D

3 Using refrigerant fluids Transfer and recovery equipment Ref. Products Dimensions mm Weight Comments Measuring and checking devices Ref. Products Comments Recovery unit Recover XLT 490 x 315 x ,7 kg Dry piston compressor protected by a constant pressure switch. Lightweight, suitable for all fluids, quiet and easy to use, with its 4 position switch. Stops automatically, governed by LP and HP pressure valve. Capacity (kg/hr) as per ARI * in gas form: 9; liquid form: 54; push-pull: Certificate EN RD x 220 x kg Dry piston compressor. All gas and liquids. Compact casing protects manometers, valves and on-off switch. HP pressure switch. Capacity (kg/hr) as per ARI in gas form: 15; liquid form: 95; push pull: 420. Certificate EN *tests executed with R Recovery machine concept: IBC-L (P), IBC-L (Ed), IBC-L (Eo) Designed for advanced recovery up to 1 mbar abs. on equipment containing refrigerants (recovery range: from 1 kg to 30 Tons - Example: storage tanks, refrigeration units...). Suitable for most refrigerants (R-22, R-134a, R-404A, R-407C, R-410A,...). IBC-L (P) and IBC-L (Ed) are particularly suitable for transfer operations, the recovered fluid is free from any traces of oil. 3 versions are available: IBC-L (P): Empty retrieval group with dry air compressors. IBC-L (Ed): Empty recovery group with dry electric compressors. IBC-L (Eo): Empty recovery group with lubricated electric compressor LCG digital vacuum gauge (69080) 6809 Micro infrared thermometer (69225) *optic ratio: distance (m) / surface (m) Contact thermometer DT Thermometer DMT Relief valve D bar 6864 Relief valve D bar Vacuum pumps To control evacuation. From 1 bar to 0,025mbar. Automatic temperature compensation without calibration. Low battery indicator. Connection 1/4 FI, female. Small size. From -33 C to +220 C. Precise to +/- 2%. Optic ratio* 1.3:1. Ergonomic pocket thermometer from -55 C to +149 C. Audio alarm can be programmed to high or low temperature. Flexible cable with stainless steel probe. Dual probe. From -200 C to C. Progammable alarm low and high levels. Delivered with 2 K type probes. Neutral gas detector. Service pressure 30 bar to put systems under nitrogen pressure. Controls the pressure of the installation. Two-way pressure gauge. Type C entry connector. Brazing outlet connector for 6mm tube and double ring outlet connector Scales Ref. Products Dimensions mm Weight Comments 6639 Electronic scale 50 kg (68827) 6641 Charging kit for scale (68829) 7830 Electronic scale 120 kg 394 x 311 x 83 4,1 kg Electronic scales. Maximum load 50kg, precise readings to within 0.1%. Kit can be adapted to ref Allows the charge in a fluid to be programmed automatically (includes solenoid valve, mains adaptor, case). 457 x 330 x 108 6,8 kg Electronic scale, max. charge 120 kg, reading precision of 1%, 0,05 kg resolution. Ref. Products Dimensions mm Weight Comments 7251 Vacuum pump 2VP42 EV 6643 Super Evac pump 95 L/Min (93543) 6644 Super Evac pump 142 L/Min (93563) 7,2 kg 2 levels 42L/Min. All fluids, evacuates to < 25 microns (0,034mbar). Flare 1/4 M. Rib cooling, easily accessible for filling and emptying. With vacuum gauge. 381 x 169 x ,4 kg 2 levels 95 L/Min, M Flare inlet connector: 1/4-1/2, inbuilt vacuum gauge, empties to: 15 microns (0,02mbar). One way valve, gas ballast. 406 x 169 x ,3 kg 2 levels 142 L/Min, M Flare inlet connector: 1/4-1/2, inbuilt vacuum gauge, empties to: 15 microns (0,02mbar). One way valve, gas ballast Electronic scale DRM kg 380 x 320 x 64 2,7 kg Electronic scales. Maximum load 150 kg, precision 10 g. Steel plate. Professional usage Oil for vacuum pump (93092) 7256 Oil for vacuum pump VPO litre can. For Super Evac Pump. ISO Grade litre can. For 2 VP vacuum pump

4 System analyser Hoses, coupling Ref. Products Weight Comments Ref. Products Connection Comments Electronic analyser Essential tool to realize a precise diagnosis of the installation: pressure, vacuum level, temperature, 91 integrated curves of pressure/temperature relationship. Automatic calibration, allows recording of measurements either continuously or at regular intervals. Calculates in real-time, heating and cooling. Immediate response. Downloading of records on PC to establish reports for example Electronic analyser 4 valves Manifolds Ref. Products Dimensions mm Comments Manifold Titan By pass, HP/LP (bar) manometer. Aluminium body, lightweight and robust, piston valves. Liquid indicator. Precise to 1%. Manifold DH Clim 1,4 kg 91 refrigerants in memory. By-pass, LCD screen, precise to 1%. Supplied software, free update download on the Internet. Delivered in a carrying case with a pack of 3 hoses, 2 probes, one vacuum gauge and one USB cable. By pass, HP/LP (bar) manometer. Aluminium body, lightweight, piston valves. Liquid indicator. Manifolds (sold separately) 4 valves R-22 R-134a R-404A R-407C R-410A 7143 Manifold DH Clim X X X X X 7062 Manifold Titan HFC (49936) X X X X 835 NH 3 hose 5 m Type C 21,7 x 1,814 on right 7357 Pack of 3 hoses 90 cm (29983) valves 7356 Pack of 3 hoses 150 cm (29985) valves 7358 Pack of 3 hoses 90 cm R-410A (29483) valves 7359 Pack of 3 hoses 150 cm R-410A (29485) valves 7453 Pack of DH Clim hoses 150 valves 7452 Pack of R-410A DH Clim hoses 150 valves 1/4 1/4 Specific hose for NH 3 with a 1/4 of a turn valve. Submitted to retesting. Reinforced hoses with stop valves, to prevent moisture ingress. Colours: blue, red, yellow. For all refrigerants (except R-410A). 1/4-5/16 R-410A special. Reinforced hoses with stop valves, to prevent moisture ingress. 1/4-5/16 Connection 1/4-5/16 for blue and red and 1/4-1/4 for yellow. 1/4 Pack of 3 hoses 150 cm for all refrigerant (except R-410A) with stop valves. Colours: blue, red and yellow. 1/4-5/16 Pack of 3 hoses 150 cm special R-410A with stop valves. Colours: blue, red and yellow. R Our hoses are equipped with stop valves - air valves, according to regulation n Empty manifold case 475 x 390 x 130 Transport case for manifold. Black, double foam interior Connector 1/4 F x 5/16 M Unit. R-410A special. Contact your subsidiary for product availability Plastic female connector /4 SAE 1226 Brass female connector /4 SAE Unit. Unit Brass female connector /8 SAE Unit J17 joint for brass connector Unit. Fibre joint Ǿ 19.6 x 12 x 3 for bronze coupling /4 and 3/

5 Leak detection Leak detection (continued) Ref. Products Comments Ref. Products Comments Sensitivity control gm/year sensitivity level checker Sets sensitivity to 5 gm/yr for portable detectors + checking report. Replacement parts for portable electronic detectors 6950 DDH1, DDH2 UV detector and filter (69384) Heated diode sensor and filter Mini-Check Creates mini leak of 5 gm/yr of R-134a so that the user can conduct on-site checks of portable leak detectors before searching for any leak. Detection using bubbles 885 Prestobul Box of 12 cans. Use in the vicinity of the suspected leak. Bubbles will form at the location of the leak DDH1, DDH2 UV filters (69385) Pack of 5 filters Sensor for Tek-Mate And D-Tek Filters Tek-Mate Pack of 10 filters XP 2 sensors For XP 1. Pack of 3 sensors. Detection using fluorescence LED UV torch (69782) 5 Blue UV Bulbs. Robust aluminium body. Tracer syringe 6889 Universal tracer injector kit (69702) Rapid injection kit for all refrigeration installations. 1/4 female connectors. One syringe contains 4 doses of 7.5 ml Pack of 6 tracer injectors (69700) Refill pack containing 6 syringes for tracer kit HFC 92 cell pack For HFC 92 detector HFC 92 filters For HFC 92 detector. Pack of 20 filters Infrared Cell D-Tek CO Filtering cartridge D-Tek CO 2 For D-Tek CO 2 detector only Portable electronic detectors 6753 Leak detector DDH2 UV Heated diode sensor. 3 sensitivity levels, suitable for all fluids CFCs, HCFCs, HFCs and HFOs, leaks signalled by audio alarm + LED, battery or mains powered. Numeric indicator allows rate of leak to be estimated in gm/year. Automatic calibration. Supplied with case. Certificate EN Equiped with a UV lamp Leak detector XP 1 By ionisation. Highly sensitive (3 gm/yr). 7 sensitivity levels, suitable for halogenated fluids, battery powered. Supplied with replacement sensor. Certificate EN Battery for D-Tek CO Sensor IR D-Tek Select 6940 Filter D-Tek Select Pack of Sensor Gas-Mate For Gas-Mate only Leak detector Sapre HFC 92 Ceramic permeation cell, highly sensitive (1 gm/yr), suitable for all fluids, battery powered. Certificate EN Leak detector Tek-Mate Heated diode sensor, 2 sensitivity levels, (2 gm/yr), audio leak alarm, battery powered Detector D-Tek Select Infrared Sensor. 2 sensitivity levels, (2 gm/yr), loud-alarm, LED light, battery powered Leak detector D-Tek CO 2 Infrared sensor for R-744. Sensitivity 6 gm/yr. NiMH Battery powered, Low battery gauge. Supplied with case and adapter 12 and 220V Leak detector Gas-Mate Sensor for fuel gas, H 2 /N 2, ammonia, propane, butane 5 sensitivity levels (5 ppm of methane). Loud and light alarm. Battery powered

6 Environment control devices Murco environment controls detect refrigerant fluids in factories, industrial manufacturing, air conditioning systems, coolers, boilers and numerous other professional applications. Murco IAM The IAM sensor is a preset alarm system that combines sensor and monitor in an integrated unit. It is a stand-alone system used to detect gases in an area, room, zone, airspace or airflow. The IAM is an ideal solution for installations in cold rooms, hotel rooms, conference rooms, apartment blocks, and office buildings, monitoring air conditioning installations,... It has 2 relays to connect or report to external control systems. Murco MGD 10 ppm sensitivity conform to french decree from 7th May Audio and visual internal alarm and switch for external alarm. Free contacts for telesurveillance and security piloting. 12V output for centralized management system. Classified Exe and Exds (areas at risk). Zone monitor: monobloc HCFC & HFC detector Ref. Products Ref. Products Fixed leak detector MURCO HCFC, HFC and hydrocarbons (HC) (=Semi conductor 6890 IAM 1 1 HFC 1000 ppm (=Semi conductor 6060 MGD1404A 1L 1 1 R-404A 100 ppm 6495 MGD2404A 1L 2 1 R-404A 100 ppm 6061 MGD2404A 2L 2 2 R-404A 100 ppm & 1000 ppm 5103 MGD1SA 1L 1 1 R ppm 5111 MGD2SA 1L 2 1 R ppm 5106 MGD1 1L 1 1 HFC and HC HFC: 100 ppm 5112 MGD2 1L 2 1 HFC and HC HFC: 100 ppm 5116 MGD2 2L 2 2 HFC and HC HFC: 100 & 1000 ppm & 2000 ppm 7693 MGD4S 1L 4 1 HFC - HCFC - HFC: 100 ppm 7694 MGD4S 2L 4 2 HFC - HCFC - HFC: 100 & 1000 ppm & 2000 ppm 7695 MGD6S 1L 6 1 HFC - HCFC - HFC: 100 ppm 7696 MGD6S 2L 6 2 HFC - HCFC - Please specify the refrigerant when placing an order for an adequate calibration. Without any specification, the HFC sensors will be calibrated on R-134a. HFC: 100 & 1000 ppm & 2000 ppm Fixed Leak Detector MURCO NH 3 Ref. Products Fixed Leak Detector MURCO CO 2 Ref. Products (=Semi conductor (=Semi conductor 5105 MGD1SNH3 1L 1 1 NH ppm 5110 MGD1SNH3 2L 1 2 NH & 1000 ppm 5114 MGD2SNH3 1L 2 1 NH ppm 5118 MGD2SNH3 2L 2 2 NH & 1000 ppm 7554 MGD1S 1L 1 1 R-744 CO MGD1S 2L 1 2 R-744 CO MGD2S 1L 2 1 R-744 CO MGD2S 2L 2 2 R-744 CO MGD4S 1L 4 1 R-744 CO MGD4S 2L 4 2 R-744 CO MGD6S 1L 6 1 R-744 CO MGD6S 2L 6 2 R-744 CO 2 Please contact us for any other equipped models up to 6 sensors and for different refrigerants. Chan 4 Chan 3 Chan 2 Chan 1 Input Power 4- Channel MGD Controller (1-or 2-Level Alarm) 2- Level Alarm Only 5116 Relay Output (Alarm) Relay Output (Alm Hi) Relay Output (Fault) and , 7694, 7674,

7 Sensors for fixed leak detectors Ref. Products Number of levels 6594 A Murco sensor 1 All HCFCs 6595 A Murco sensor 2 All HCFCs 6596 C Murco sensor 1 All HFCs 6702 C Murco sensor 2 All HFCs 7835 IR sensor R-744 CO Optional housing IP66 For sensors A, C & IR. The sensor is fitted into the housing at the factory. Measuring apparatus Ref. Products Comments 4637 Refractometer Precise on-site measurement of the freezing point of a glycol-based heat transfer fluid. Transfer apparatus Ref. Products Dimensions Comments Application of heat transfer and secondary refrigerant fluids Flow Regulator Typical Flow 0.3L/Min 5785 KAPPA 15 diaphragm pump 346 x 225 x 170 mm For transferring heat transfer fluids. Calibration kit for MURCO Self-priming pump with flow rate of 13.5 l/min, 4637 under a pressure of 20 bar. Ref. Products Types of fluids Comments EN378 and F-Gas regulations on halocarbon refrigerants make regular checking of gas detection systems mandatory. To simplify compliance and checking, Murco offer calibration kits and provide an easy to follow test procedure Calibration kit CAN ppm 7598 Calibration kit CAN ppm HCFC/HFC HCFC/HFC For HCFC / HFC. Sensitivity control kit for yearly check of the fixed leak detectors. Includes: a 110 l cylinder of calibration gas, a flow regulator, a calibrating venting hood, and flexible non absorbent tubing. Please specify refrigerant when you place your order Calibration kit CAN 110 CO 2 Includes: a 110 l cylinder of calibration gas, a 7862 Calibration kit CAN 110 NH 3 flow regulator, a calibrating venting hood, and flexible non absorbent tubing. The material can be simply and quickly checked. Please specify the concentration in ppm when you place your order Universal pump For 217 L barrel Includes: one FP430 PP-1000 plunger body, 1 meter long, an F417 electric motor, a screw for G2 plunger body Universal pump For 30 L barrel Includes: one FP430 PP-700 plunger body, 0.7 m long, an F417 electric motor, a screw for G2 plunger body FP 430 PP plunger bodies Unit 1 m long - For 217 L barrel FP 430 PP plunger bodies Unit 0.7 m long - For 30 L barrel F 417 electrical motor Unit 7140 Nut for G2 plunger bodies Unit Upon request. For empty recovery packaging please see HTF, Oils, and Cleaning ranges p. 29, 38 and 58 Materials Ref. Products Comments Universal pump This pump can be used to introduce heat transfer fluids, lubricants and our cleaning products. Using brazing alloys Outlet 5/8 18 UNF (C10) Flexible non-absorbant tubing Vented Calibration Hood Cylinder 360mm high x 88mm diameter 440mm high with flow regulator 110L capacity of calibration gas Weight 1.4 kg Temperature range Type of sensor Semi-conductor Infra-red Standard enclosure -20 to +50 C -20 to +50 C With IP 66 option -40 to +50 C -40 to +50 C Relief valve D bar See p Relief valve D bar See p. 45. Silicones Ref. Products Packaging Comments 5703 Silicone sanitary white Box of 25 x 300 ml Acetic silicone with fungicide Silicone neutral white Box of 25 x 310 ml High performance neutral silicone for very humid environments. Special insulation panels. Fungicide, approved for occasional contact with foodstuffs. Products, packaging and fill weights may vary by country. Contact your subsidiary for more detailed information. Insulation application