RECESSED - WITH StepLens OPTION

Transcription

1 Project Type Notes PERFORMANCE PER LINEAR FOOT AT 4K Flush shielding option Flush StepLens option Regressed NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.7 W/ft 19 lm/w 5 lm/ft 4.6 W/ft 18 lm/w 75 lm/ft 7.1 W/ft 15 lm/w 1 lm/ft 9.7 W/ft 13 lm/w * Based on a 4 foot luminaire using one driver Please consult factory for custom lumen output and wattage. Ordering Guide BMRLED IC 5 culus Listed Type I.C. StepLens CONTROL SENSORS PRODUCT ID NOM. LUMENS/FT CRI COLOR TEMP. SHIELDING LENGTH LED BOARD & DRIVER BMRLED Recessed LED 4 4 lm/ft 8 8 CRI K FL flush lm/ft 9 9 CRI 3 3 K RG regressed lm/ft K 1.25M 1.25" StepLens, lum. end cap lm/ft 4 4 K 1.25P 1.25" StepLens, opaque end cap S# system run Outputs between listed min and max are available. Consult factory for outputs outside of the listed range. All lens options use spotless lens See page 3 for more details YEAR LUMINAIRE WARRANTY MR (OPTIONAL) FINISH VOLTAGE DRIVER CIRCUITS M16(#) MR halogen lamp - Line voltage (by other) (1) W white V DP dimming (-1V) 1% 1 1 circuit M16LED(#) MR16 LED lamp - Line voltage (by other) (1) C custom V D dimming (-1V) 5% 347V standard (4) 2 2 circuits M16LEDB(#) MR16 LED lamp - Dimmable (provided) (2) V (3) LT Lutron (5) +E(#) emergency circuit (7) UNV universal BI bi-level dimming +NL(#) night light circuit (7) O other (6) +GTD(#) generator transfer device (7) +LDI LED downlight insert (1) Specify quantity; Line wattage only; Seperate circuits included (2) Consult factory; See page 4 for more details. M16 constant current for -1V & DALI only (3) D dimming (-1V) 5% standard (4) For 347V only (5) Specify system (6) Please consult factory; see page 2 (7) Specify quantity MOUNTING BATTERY (OPTIONAL) OTHER (OPTIONAL) IC CONTROLS (OPTIONAL) CUSTOM (OPTIONAL) TB9 t-bar 9/16 B# battery pack 4 sections F fuse (8) DS# daylight sensor C custom TB15 t-bar 15/16 EF end feed OS# occupancy sensor ST screw slot t-bar FW(#) flex whip (6 std) DOS# daylight & occupancy sensor TG9 tegular 9/16 CP Chicago plenum EN# Enlighted integral (11) TG15 tegular 15/16 HD hold-down clip (9) ENR# Enlighted remote (12) DF drywall flange AR air return plate (1) D drywall flangeless SR sprinkler plate (1) DB slip-through bracket SPK speaker plate ( 1) DS drywall spackle flange Requires 12V or 277V Please specify Please consult factory (8) Requires 12V or 277V (9) Only available for t-bar mounting (1) Please consult factory (11) For flush and regressed option only; Please consult factory (12) Please consult factory Specify quantity. Requires 8" blank. See pages 8-9 for more details. 1 / 9

2 SPECIFICATIONS CONSTRUCTION Housing Interior Brackets Reflectors Blank Lens T-Bar Bracket Screw Slot T-Bar Bracket Slip-Through Bracket Spackle Flange Flange Extruded aluminum (.75'' nominal) Up to 7% recycled content Die formed sheet steel (18 gauge) White powder coated sheet steel (22 gauge) Extruded aluminum (.75'' nominal) Spotless acrylic lens Die formed sheet steel (16 gauge) Die formed sheet steel (16 gauge) Die formed sheet steel (18 gauge) Die formed perforated sheet steel (2 gauge) Extruded aluminum (.75'' nominal) Visible flange width: 9/16" SHIELDING - Frosted acrylic Spotless lens FL flush 1.25M 1.25" StepLens, lum. end cap RG regressed 1.25P 1.25" StepLens, opaque end cap StepLens ELECTRICAL Lutron driver L3D - Hi-Lume A-Series EcoSystem 3-Wire Control (1%) LDE1 - EcoSystem H-Series (1%) LDE5 - EcoSystem 5-Series (5%) LTE - Hi-Lume A-series 2Wires Forward Phase (1%) JOINERS In order to allow very long runs of BEAM3 LED luminaires, Axis has developed a number of different joining systems. Special care has been taken to maximize the performance of the joiner for each BEAM3 LED option. Other drivers Emergency Input Voltage DALI - Digital Addressable Lighting Interface DMX - Digital Multiplex LV - line voltage - Advance Mark 1 Xitanium SR - For wireless sensor Integral emergency battery pack or emergency circuit optional. 12V, 277V, 347V, UNV. Incorporating these components may have limitations or affect the length of the luminaire. Please contact factory for more details. SYSTEM (S#) BEAM3 LED linear systems, with the use of a strong profile, allow for a nearly hair thin connection system of continuous runs. Lengths of 4', 8', 12' as well as custom lengths are available. Runs of BEAM3 LED that are greater than 12' in length are designated as systems (S#). This means that the run is comprised of a combination 4', 8' and/or 12' sections to be assembled on site using our joining system. For more information on systems and joining, please refer to the BEAM3 LED installation sheets available for download at APPROVALS Certified to UL and CUL standards Meets NYC requirements Meets CCEC requirements (Chicago plenum) Suitable for damp locations IC Rated (Insulated ceiling) JOINER SYSTEM NOTE: Hang each system segment individually. Do not assemble system prior to hanging. FINISHES Powder coated and custom finishes are also available. WEIGHT Recessed LED 4 ft Recessed LED 8 ft Recessed LED 12 ft 12.3 lbs / 5. kg 24.6 lbs / 1.1 kg 36.9 lbs / 15.1 kg 2 / 9

3 STEP LENS OPTION 3 3/8 PERFORMANCE LUMENS WATTS EFFICACY 95 lm/ft 8.73 W/ft 11 lm/w 3 15/16 1 1/4 95 lm/ft lm with 1.25" StepLens CANDELA DISTRIBUTION ZONAL LUMENS LUMINANCE DATA (cd/m 2 ) StepLens Total : 3783 lm (for 4ft) Input Watts: 33.9 W Efficacy: 112 lm/w IES FILE: BMRLED M-4-W Angle All IES files are available for download at: www. 3 / 9

4 CORNERS MR16 LED LAMPS Unlit Corners - BEAM3 LED features a multitude of layout patterns with the use of a number of corners, corner, T or X junctions. corner X junction T junction Lit Corners - Axis also offers lit corners including ceiling to ceiling, wall to ceiling and ceiling to wall. 9 unlit corner wall to ceiling lit corner For custom corner angles, please consult factory. Specifications sheets for all corners are available at: www. Blank MR16 Halogens MR16 LED MR16 LEDB Quantity Spacing 3 3 / 8 " 3 15 / 16 " 2" Extruded aluminum (.75'' nominal) Adjustable halogen lamp 35W / 5W (by others) - Line voltage dimming only Adjustable LED lamp (provided)- Line voltage dimming only Constant current LED lamp (provided)- Dimmable by control system for -1V DALI only For every 4' section, there may be up to a maximum of 4 x MR16 LED lamps. Each MR16 LED lamp is placed centered on a blank section 9'' in length. For a series of MR16's within a given section length, they will be spaced evenly on a longer blank section. The directed light of MR16 LED lamps are fixed downward. Custom spacing may be available on special request. *For StepLens please consult factory. Between sections WARRANTY Axis Lighting will warrant defective LEDs, boards, and drivers for 5 years from date of purchase. Warranty is valid if luminaire is installed and used according to specifications. If defective, Axis will send replacement boards or drivers at no cost along with detailed replacement instructions and instructions on how to return defective components to Axis. At luminare ends 9" 9" OTHER MOUNTING OPTIONS BEAM3 LED is also available with pendant, surface, wall, wall vertical, recessed asymmetric and recessed vertical mounted options. Specification sheets and installation sheets for all mounting for BEAM3 LED luminaires are available for download at: www. TECHZONE TM AND LOGIX TM Integrated contiguous modules for PA speakers, Air Returns and Sprinkler Heads are available for our recessed Beam products to add a consistent linear system to complete the illuminated portion. Several in a long blank section variable Base Type GU 5.3 Beam Angle 4 nominal degrees Input Watts 6W Nominal 3 lumens Efficacy 5 lumens per watt Color Rendering Index (CRI) 85 Center Beam Candle Power (CBCP) 584 candelas Life 25, hours at L 7 Correlated color temperature (CCT) 27K More options are available upon request. Please consult factory. SPK SPEAKER SR SPRINKLER AR AIR RETURN 4 / 9

5 TB CEILING MOUNTING OPTIONS TB15 15/16" T-BAR TB9 9/16" T-BAR ST SCREW SLOT T-BAR 3 3 / / /8 1 /8 5 1 /4 With flanges 5 1 /4 T-bars spacing TG15 15/16" TEGULAR TG9 9/16" T-TEGULAR TX TX HUNTER DOUGLAS TECHSTYLE DRYWALL CEILING MOUNTING OPTIONS D FLANGELESS WITH 1/4-2 STUD MOUNTING DB VISIBLE FLANGES WITH SLIP-THROUGH BRACKET DF VISIBLE FLANGES WITH 1/4-2 STUD MOUNTING DS SPACKLE FLANGES OTHER MOUNTING OPTIONS BEAM 3 LED is also available with pendant, surface, wall and recessed wall mounted options. Specification sheets and installation sheets for all mounting for BEAM luminaires are available for download at www. 5 / 9

6 INTEGRATED CONTROLS BEAM3 LED luminaires allow the use of integrated controls such as daylight sensors (DS), occupancy sensors (OS) and combination daylight/occupancy sensors (DOS). These options can be seamlessly integrated into our luminaires. The control system could be used to optimize the lighting of the space by reducing energy consumption through daylight harvesting and occupancy, thereby improving the overall interior environment and allowing for LEED credits. Consult factory for other options. CONTROL SENSORS The integrated control systems offered are: DAYLIGHT HARVESTING (DS): With Daylight sensors, maximum lamp output is reduced according to the available amount of natural light. By reducing maximum lamp output, energy consumption is reduced by up to 2 percent in a process known as Daylight Harvesting. Shown with Luxsense EC-DIR-WH, FD-31 Luxsense, Micro Luxsense OCCUPANCY (OS): When a room is vacated, occupancy sensors ensure the light will be turned off after a programmed delay as well as ensuring that light remains on while the room is occupied. Shown with FS-25 FS-25, FS-355, FS Line Voltage FS-55, FS-55C DAYLIGHT HARVESTING AND OCCUPANCY (DOS): ACTILUME, a combination of Daylight & Occupancy sensor from Philips, along with a -1V or DALI driver can be used in one form factor. Shown with Actilume DALI Actilume 1-1V Actilume DALI ENLIGHTED INTEGRAL (EN) / ENLIGHTED REMOTE (ENR): A combination of Daylight, Occupancy & Temperature autonomously control illumination levels, monitor occupancy and environmental conditions. Data is transmitted wirelessly to the Enlighted networked management system. INSTALLATION EXAMPLE Sensor location option controls option Use in flush and regressed lens. For StepLens use remote sensors only. * Incorporating IC controls may affect the length of the luminaire. Please contact factory for more details. 6 / 9

7 INTEGRATED CONTROL OPTIONS SENSORS BRAND Model TYPE Daylight Sensor (DS) Occupancy Sensor (OS) Daylight & Occupancy Sensors (DOS) Enlighted sensor (EN, ENR) Lutron EC-DIR-WH Daylight, IR Wattstopper FD-31 Daylight Philips Luxsense LRL122/ Daylight Philips Micro Luxsense Daylight Wattstopper FS-25v2 PIR Occupancy & Ambient light level Wattstopper FS-355 (need lenses) PIR Occupancy & Ambient light level Wattstopper FS-155 PIR Occupancy & Ambient light level Wattstopper FS-55 Ultrasonic Occupancy (Staircase) Wattstopper FS-55C Ultrasonic Occupancy (Open Area) Wattstopper FM-15 High Frequency Occupancy (Wet) Philips Actilume, LR11655 Daylight & PIR Occupancy Wattstopper FS-35 (need Lenses) PIR Occupancy Wattstopper FS-35 RC PIR Occupancy & Ambient light level Lutron TriPak Wireless LRF2-DCRB-WH & LRF2-OCR2B-P-WH Daylight & PIR Occupancy Enlighted integral/remote SU-3E- Daylight, Occupancy & Temperature 7 / 9

8 PHOTOMETRIC DATA 4 lm/ft CANDELA DISTRIBUTION ZONAL LUMENS LUMINANCE DATA (cd/m 2 ) 5 1 Angle Luminaire : 4 lm/ft Input Watts: 3.6 W/ft Efficacy: 19 lm/w IES FILE: BMRLED FL.IES TESTED ACCORDING TO IES LM lm/ft CANDELA DISTRIBUTION ZONAL LUMENS LUMINANCE DATA (cd/m 2 ) 5 1 Angle Luminaire : 5 lm/ft Input Watts: 4.6 W/ft Efficacy: 18 lm/w IES FILE: BMRLED FL.IES TESTED ACCORDING TO IES LM All IES files are available for download at: www. 8 / 9

9 PHOTOMETRIC DATA 75 lm/ft CANDELA DISTRIBUTION ZONAL LUMENS LUMINANCE DATA (cd/m 2 ) 5 1 Angle Luminaire : 75 lm/ft Input Watts: 7.1 W/ft Efficacy: 15 lm/w IES FILE: BMRLED FL.IES TESTED ACCORDING TO IES LM lm/ft CANDELA DISTRIBUTION ZONAL LUMENS LUMINANCE DATA (cd/m 2 ) 5 1 Angle Luminaire : 1 lm/ft Input Watts: 9.7 W/ft Efficacy: 13 lm/w IES FILE: BMRLED FL.IES TESTED ACCORDING TO IES LM All IES files are available for download at: www. 9 / 9