Fiber Optic Distribution Cables (6-144 Fibers)
|
|
|
- Blaze Boyd
- 6 years ago
- Views:
Transcription
1 900um Buffered Aramid Yarn Strength Members Outer 6 or 12 Subunit Central Strength Member Outer Ripcord Single Unit Cable 6-24 Multi-Unit Cable Description: AMP NETCONNECT distribution cables are designed for routing between communications closets, as intra-building backbone cables and for connectorized communication cables. Distribution cables are all-dielectric and consist of 900µm tight buffered fibers surrounded by aramid yarn strength members and a flexible thermoplastic outer jacket. Twenty-four, and higher fiber count constructions have two or more subunits and a central strength member (24 fiber side by side constructions do not have a central strength member). The cables are available in and constructions with single-mode OS2 B1.3 (Low Water Peak), 62.5/125 µm OM1, 50/125 µm OM2,, or 50/125 µm OM4 fiber. Standard jacket colors are orange for 62.5/125 µm OM1 and 50/125 µm OM2, aqua for and 50/125 µm OM4, and yellow for single-mode OS2. Other jacket colors are available upon request. Standards Compliance: AMP NETCONNECT cables are designed and tested to conform to the fiber and cable performance requirements of TIA 568, ISO 11801, Telcordia GR-409-CORE and ICEA-596 Standards. All cables have UL or ETL fire safety listings to either OFNR (UL-1666/CSA FT-4) or OFNP (NFPA-262/UL 910/CSA FT-6). Cable Print: Cables will be marked every two feet with: AMP NETCONNECT OPTICAL CABLE <fiber count> <fiber type> <flame rating> MM/YY SO<shop order number> FEET Specification Revision D5 Date 4/9/2012 Page 1 of 8
2 s: s/unit Type 62.5/125 µm OM1 Orange /125 µm OM2 Orange Aqua /125 µm OM4 Aqua Single-mode OS2 Yellow Orange Green /125 µm OM1 Red Black Yellow Violet Orange Blue Brown Slate /125 µm OM2 Red Yellow Violet Rose Aqua Aqua Orange /125 µm OM4 Aqua Yellow Single-mode OS2 Slate White /125 µm OM1 Orange /125 µm OM2 Orange Aqua Orange /125 µm OM4 Aqua Single-mode OS2 Yellow /125 µm OM1 Orange /125 µm OM2 Orange Aqua /125 µm OM4 Aqua Single-mode OS2 Yellow Specification Revision D5 Date 4/9/2012 Page 2 of 8
3 s/unit Type 62.5/125 µm OM1 Orange /125 µm OM2 Orange Aqua Blue /125 µm OM4 Aqua Single-mode OS2 Yellow /125 µm OM1 Orange Orange Blue Brown Slate /125 µm OM2 Red Yellow Violet Rose Aqua Aqua Blue Red Aqua /125 µm OM4 Orange Black Yellow Single-mode OS2 Slate Red Black Specification Revision D5 Date 4/9/2012 Page 3 of 8
4 s/unit Type 62.5/125 µm OM1 Orange /125 µm OM2 Orange Aqua /125 µm OM4 Aqua Single-mode OS2 Yellow /125 µm OM1 Orange /125 µm OM2 Orange Aqua Orange Green Red Aqua Orange Brown /125 µm OM4 Red Black Yellow Violet Single-mode OS2 Yellow /125 µm OM1 Orange /125 µm OM2 Orange Aqua Orange /125 µm OM4 Aqua Single-mode OS2 Yellow /125 µm OM1 Orange /125 µm OM2 Orange Aqua /125 µm OM4 Aqua Single-mode OS2 Yellow /125 µm OM1 Orange /125 µm OM2 Orange Aqua Orange /125 µm OM4 Aqua Single-mode OS2 Yellow /125 µm OM1 Orange /125 µm OM2 Orange Aqua /125 µm OM4 Aqua Single-mode OS2 Yellow /125 µm OM1 Orange /125 µm OM2 Orange Aqua /125 µm OM4 Aqua Single-mode OS2 Yellow /125 µm OM1 Orange /125 µm OM2 Orange Aqua /125 µm OM4 Aqua Single-mode OS2 Yellow Specification Revision D5 Date 4/9/2012 Page 4 of 8
5 s/unit Type 62.5/125 µm OM1 Orange /125 µm OM2 Orange Aqua /125 µm OM4 Aqua Single-mode OS2 Yellow /125 µm OM1 Orange /125 µm OM2 Orange Aqua Green Red /125 µm OM4 Aqua Black Single-mode OS2 Yellow /125 µm OM1 Orange /125 µm OM2 Orange Aqua /125 µm OM4 Aqua Single-mode OS2 Yellow /125 µm OM1 Orange /125 µm OM2 Orange Aqua Blue Green Red Yellow /125 µm OM4 Aqua Single-mode OS2 Yellow /125 µm OM1 Orange /125 µm OM2 Orange Aqua /125 µm OM4 Aqua Single-mode OS2 Yellow /125 µm OM1 Orange /125 µm OM2 Orange Aqua /125 µm OM4 Aqua Single-mode OS2 Yellow /125 µm OM1 Orange /125 µm OM2 Orange Aqua /125 µm OM4 Aqua Single-mode OS2 Yellow /125 µm OM1 Orange /125 µm OM2 Orange Aqua /125 µm OM4 Aqua Single-mode OS2 Yellow Black Specification Revision D5 Date 4/9/2012 Page 5 of 8
6 Hybrid Distribution Cables: s/unit Number Of Type s 4 Single-mode OS2 4 4 Single-mode OS2 8 50/125 µm OM2 6 Single-mode OS2 6 50/125 OM /125 µm OM /125 µm OM /125 µm OM /125 µm OM /125 OM /125 µm OM /125 µm OM1 Outer Black Black Aqua Orange Orange Orange Orange Aqua Orange Orange Single-mode OS /125 µm OM1 24 Single-mode OS /125 µm OM1 48 Single-mode OS2 24 Orange Orange Black Note: Hybrid cables are constructed in order of core size from smallest to largest (single-mode fibers taking the first positions, followed by multimode). Single-mode subunits will have a yellow subunit jacket. Multimode OM1 and OM2 subunits will have an orange subunit jacket. Multimode OM3 and OM4 subunits will have an aqua jacket. Specification Revision D5 Date 4/9/2012 Page 6 of 8
7 Performance Specifications: AMP NETCONNECT tight-buffered distribution cables are designed and tested in accordance with TIA 568, ISO 11801, ICEA 596, Telcordia GR-409-CORE and UL 1666/901. Performance specifications are measured in accordance with the Optic Test Procedures (EIA/TIA-455 documents) and the test procedures of IEC and IEC Mechanical Specifications: (units x fibers/unit) 6 Minimum Bend Radius Nominal Rated Tensile Load O.D. Sub Unit O.D. Long Weight Long mm (in) mm (in) Install Term kg/km Install Term mm (in) mm (in) (lbs/1000ft) N (lbf) N (lbf) OFNR 5.2±1.0 (0.20±.04) 114 (4.5) 57 (2.2) 29 (19) 660 (150) 198 (45) N/A 110 (4.3) 55 (2.2) 24 (16) 440 (100) 132 (30) OFNR 5.7±1.4 (0.22±.05) 136 (5.4) 68 (2.7) 24 (16) 660 (150) 198 (45) N/A 110 (4.3) 55 (2.2) 26 (17) 440 (100) 132 (30) OFNR 6.0±0.8 (0.24±.03) 128 (5) 64 (2.5) 37 (25) 660 (150) 198 (45) N/A 128 (5) 64 (2.5) 46 (31) 440 (100) 132 (30) OFNR 8.0±1.2 (0.31±.05) 178 (7) 89 (3.5) 61 (41) 1320 (300) 396 (90) N/A 168 (6.6) 84 (3.3) 69 (46) 660 (150) 198 (45) OFNR 7.4±1.2 x 13.0±1.9 (0.29±.05 x 0.51±.07) 5.6±0.7 (0.22±.03) 284 (11.2) 142 (5.6) 87 (58) 1320 (300) 396 (90) OFNP 7.0±0.8 x 12.4±1.3 (0.28±.03 x 0.49±.05) 5.4±0.4 (0.21±.02) 264 (10.4) 132 (5.2) 92 (62) 660 (150) 198 (45) OFNR 13.4±0.8 (0.53±.03) 4.4±0.6 (0.17±.02) 275 (10.8) 137 (5.4) 180 (121) 1320 (300) 396 (90) (1x6) OFNP 4.8±0.9 (0.19±.04) 8 (1x8) OFNP 5.0±0.8 (0.20±.03) 12 (1x12) OFNP 5.7±0.9 (0.23±.04) 24 (1x24) OFNP 7.7±1.0 (0.30±.04) 24 (2x12) 24 (4x6) OFNP 13.3±0.5 (0.52±.02) 4.4±0.4 (0.17±.01) 266 (10.5) 133 (5.2) 200 (134) 660 (150) 198 (45) 36 OFNR 16.4±1.3 (0.65±.05) 4.4±0.6 (0.17±.02) 342 (13.5) 171 (6.7) 220 (148) 1320 (300) 396 (90) (6x6) OFNP 16.0±0.9 (0.63±.03) 4.4±0.4 (0.17±.01) 327 (12.9) 164 (6.4) 255 (171) 660 (150) 198 (45) 48 OFNR 16.0±2.0 (0.63±.08) 5.6±0.7 (0.22±.03) 350 (13.8) 175 (6.9) 250 (168) 1320 (300) 396 (90) (4x12) OFNP 15.2±0.9 (0.60±.04) 5.4±0.4 (0.21±.02) 312 (12.3) 156 (6.1) 202 (136) 660 (150) 198 (45) 72 OFNR 18.9±0.9 (0.75±.03) 5.4±0.4 (0.21±.02) 386 (15.2) 193 (7.6) 301 (202) 1320 (300) 396 (90) (6x12) OFNP 18.5±1.3 (0.73±.05) 5.4±0.4 (0.21±.02) 386 (15.2) 193 (7.6) 316 (212) 660 (150) 198 (45) 96 OFNR 22.8±0.9 (0.90±.03) 5.4±0.4 (0.21±.02) 462 (18.2) 231 (9.1) 433 (291) 1320 (300) 396 (90) (8x12) OFNP 22.0±0.9 (0.86±.04) 5.4±0.4 (0.21±.02) 448 (17.6) 224 (8.8) 466 (313) 660 (150) 198 (45) 144 OFNR 24.8±1.4 (0.98±.06) 5.4±0.4 (0.21±.02) 514 (20.2) 257 (10.1) 461 (310) 1320 (300) 396 (90) (12x12) OFNP 24.2±2.0 (0.95±.08) 5.4±0.4 (0.21±.02) 514 (20.2) 257 (10.1) 474 (319) 660 (150) 198 (45) Specification Revision D5 Date 4/9/2012 Page 7 of 8
8 Performance Characteristics: 62.5/125 µm OM1 (850nm/1300nm) 50/125 µm OM2 (850nm/1300nm) (850nm/1300nm) 50/125 µm OM4 (850nm/1300nm) Single-mode OS2 B1.3 (1310nm/1550nm) Maximum Attenuation 3.5/1.2 db/km 3.5/1.5 db/km 3.2/1.2 db/km 3.2/1.2 db/km 0.5/0.5dB/km OFL Bandwidth 200/500 MHz km 500/500 MHz km 1500/500 MHz km 3500/500 MHz km Not Applicable 850nm Effective Modal Not Applicable Not Applicable 2000 MHz km 4700 MHz km Not Applicable Bandwidth 10 Gigabit Ethernet at 850nm Maximum Distance 33m 82m 300m 550m Not Applicable Specification TIA-492AAAA IEC A1b Temperature s: TIA-492AAAB IEC A1a.1 TIA-492AAAC IEC A1a.2 UL/NEC Operation Installation Storage/Shipping (OFNP) 0 C to +70 C (+32 F to +158 F) 0 C to +60 C (+32 F to +140 F) -40 C to +70 C (OFNR) -20 C to +70 C -10 C to +60 C (-40 F to +158 F) (-4 F to +158 F) (14 F to +140 F) TIA-492AAAD IEC A1a.3 TIA-492CAAB ITU-T G.652.D IEC B1.3 U.S.A Canada Mexico South and Central Americas On the web: Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. TE Connectivity, TE connectivity (logo), and AMP NETCONNECT are trademarks. Other logos, product and/or company names might be trademarks of their respective owners. This specification is subject to change without notice. Specification Revision D5 Date 4/9/2012 Page 8 of 8
TE CONNECTIVITY <fiber count> <fiber type> <flame rating> MM/YY SO<shop order number> XXXXX FEET
Optic Backbone Distribution Cables 900um Buffered Aramid Yarn Strength Members Outer 6 or 12 Subunit Central Strength Member Outer Ripcord Single Unit Cable 6-24 Multi-Unit Cable 24-144 Description: TE
Multipurpose Cables (indoor/outdoor), Multipurpose central tube cable (maxibundle) with glass yarn armouring A-DQ(BN)H 4-24
Features and Benefits Laminated swelling glass yarns Improved rodent resistance and longitudinal water protection UV and microbe resistant Can be directly buried or installed in ducts Metal-free cable
FTTX Solutions Mini Rapid Fiber Distribution Terminal (RDT)
TE Connectivity's (TE) FTTX infrastructure solutions are designed from the ground up to meet the unique requirements of FTTX networks. Designed for operational efficiency and scalability, TE s FTTX solutions
Industrial Fiber Optic Cables, LSZH Corrugated Armored Cable, Fibers
Features and Benefits Corrugated armor Mechanical protection Low-smoke/zero-halogen (LSZH ) sheath Key life-safety benefit Meets cyclic impact and chemical resistance test Superior performance Tray-rated
Data sheet OpDAT breakout cable 12x1 OM4 - bend insensitive, class Dca s1 d1 a1
Page 1/9 Illustrations Principle diagram See enlarged drawings at the end of document Product specification connection cable I-V(ZN)HH breakout cable for direct connector termination for indoors and outdoors
Data sheet OpDAT mini breakout cable 24x1 OM4 - bend insensitive
Page 1/8 Illustrations Principle diagram See enlarged drawings at the end of document Product specification mini-breakout installation cable U-VQ(ZN)H laser-optimized, bend insensitive fiber UV-resistant,
Data sheet OpDAT universal cable 1x24 OM4 - bend insensitive
Illustrations Principle diagram Page 1/7 Product specification installation cable U-DQ(ZN)BH universal fiber optic cable for indoors/outdoors with central or stranded loose tube bend insensitive fiber
outdoor and indoor campus backbone, building backbone (riser) FDDI, Gigabit Ethernet and ATM Easy to install direct burial halogen-free
GUSN Central Loose Tube Cables (Distribution) Universal Indoor/ Outdoor A/I-DQ(ZN)BH Standard Rodent Protection 05-04-8 v0.0 Ordering Information Belden Part Numbers Fibre Description / count 4 6 8 6 4
SECTION COMMUNICATIONS OPTICAL FIBER BACKBONE CABLING
SECTION 27 13 23 COMMUNICATIONS OPTICAL FIBER PART 1 - GENERAL 1.1 SUMMARY A. Section Includes the following: 1. 50/125-micrometer, optical fiber cabling. 2. Cable connecting hardware, termination panels,
industry solutions: military
industry solutions: military MC industry Solutions: Military A tradition of leadership in technology, product performance for military applications Optical Cable Corporation is a leading manufacturer of
GUCN. Central Loose Tube Cables Universal Indoor / Outdoor - Corrugated Steel Tape Armor (CST) A/I-DQ(ZN)(SR)H Full Rodent Protection v13.
GUCN Central Loose Tube Cables Universal Indoor / Outdoor - Corrugated Steel Tape Armor (CST) A/I-DQ(ZN)(SR)H Full Rodent Protection 07-07-05 v3.0 Ordering Information Belden Part Numbers Fibre Description
Duct Cable GYTS-144B1.3
Optical Fibre Cable Technical Specification Duct Cable GYTS-144B1.3 Xcom Ltd All rights reserved 1. Scope This Specification covers the design requirements and performance standard for the supply of optical
GCRG. Multi Loose Tube Cables Universal Indoor / Outdoor A/I-DQ(ZN)BH Improved Rodent Protection v7.0. Ordering Information.
GCRG Multi Loose Tube Cables Universal Indoor / Outdoor A/I-DQ(ZN)BH Improved Rodent Protection 05-05-7 v7.0 Ordering Information Belden Part Numbers Fibre Description / count 4 8 8 4 30 36 6.5/5-OM GCRG04
GUSA. Central Loose Tube Cables (Distribution) Universal Indoor/ Outdoor A/I-DQ(ZN)BH Standard Rodent Protection. Ordering Information.
GUSA Central Loose Tube Cables (Distribution) Universal Indoor/ Outdoor A/I-DQ(ZN)BH Standard Rodent Protection Ordering Information Belden European Part Numbers Fibre type / count 2 4 6 8 12 62.5/125-OM1
GUSN. Central Loose Tube Cables (Distribution) Universal Indoor/ Outdoor A/I-DQ(ZN)BH Standard Rodent Protection. Ordering Information.
GUSN Central Loose Tube Cables (Distribution) Universal Indoor/ Outdoor A/I-DQ(ZN)BH Standard Rodent Protection Ordering Information Belden European Part Numbers Fibre type / count 2 4 6 8 12 16 24 62.5/125-OM1
Fibre Optic Cable. Catalogue.
Fibre Optic Cable Catalogue www.fibrefab.com About The FibreFab Group FibreFab Established in 1992, FibreFab is a leading provider of fibre optic connectivity products used in data communications and Telecommunication
GBRD. Multi Loose Tube Cables Outdoor A-DQ(ZN)B2Y Improved Rodent Protection. Ordering Information. Applications. Features & Benefits
GBRD Multi Loose Tube Cables Outdoor A-DQ(ZN)B2Y Improved Rodent Protection Ordering Information Belden European Part Numbers Fibre type / count 24 36 48 60 72 62.5/125-OM1 GBRD124 GBRD136 GBRD148 GBRD160
Easy to install in ducts, tunnels and trenches by means of compressed air or pulling wire. Suitable for direct burial (crush 400 N/cm).
GCDG Multi Loose Tube Cables Universal Indoor / Outdoor - Corrugated Steel Tape Armor (CST) A/I-DQ(ZN)H(SR)H Full Rodent Protection Ordering Information Belden European Part Numbers Fibre type / count
2016 CDM Smith All Rights Reserved July 2016 SECTION FIBER OPTIC DATA NETWORK
PART 1 GENERAL 1.01 SCOPE OF WORK SECTION 27 12 23 FIBER OPTIC DATA NETWORK A. Furnish, install, terminate, and test all fiber optic equipment and cabling necessary for a complete and functional data highway
OPTICAL. Micromodule DW About Us. > IEC nd Ed. According to. > EN nd Ed. FTTx
fibrewave About Us Prysmian is a global market leader in optical cables, supplying a major part of the world s optical cable needs. With a strong heritage of highly advanced R&D, Prysmian is at the leading
Firetuf OFC-UT-CST Fire resistant Armoured Central Tube Cable, variant in red
Indoor/Outdoor steel tape armoured (CST) double LSHF-FR sheathed optical cable with 2 24 fibres. VDE: A/I-DQ(ZN)H(SR)H 3rd party verification of the fire tests by BUREAU VERITAS December 2014 OFC-UT-CST
Ø 1000 * 588 mm 50 kg
GUCN Central Loose Tube Cables Universal Indoor / Outdoor - Corrugated Steel Tape Armor (CST) A/I-DQ(ZN)(SR)H Full Rodent Protection Ordering Information Belden European Part Numbers Fibre type / count
Optical Fibre Cable Technical Specification. Duct Cable GYTA-72B1.3
VersionGYTA-72B1.3 Optical Fibre Cable Technical Specification Duct Cable GYTA-72B1.3 Yangtze Optical Fibre and Cable Joint Stock Limited Company All rights reserved www.yofc.com All Rights Reserved Copyright
GOF Indoor and Outdoor Cables. Documentation VWL Version 2.2 Source Code R
GOF Indoor and Outdoor Cables Documentation VWL 064.504 Version 2.2 Source Code R GOF Installation Cables Cable matrix / overview Source code: R Use Indoor In- / Outdoor Outdoor Type of cable Breakout
Sumitomo Fiber Specification SE-6** Non-Zero Dispersion Shifted Single-Mode Fiber. PureGuide SM Optical Fiber, TIA Type IVd. Issued: November 2003
Sumitomo Fiber Specification SE-6** Non-Zero Dispersion Shifted Single-Mode Fiber PureGuide SM Optical Fiber, TIA Type IVd Issued: November 2003 78 Alexander Drive, Research Triangle Park, NC 27709 Phone
Sumitomo Fiber Specification SE-9** Non-Zero Dispersion Shifted (NZDF) Zero Water Peak Large Effective Area Single Mode Fiber
Sumitomo Fiber Specification SE-9** Non-Zero Dispersion Shifted (NZDF) Zero Water Peak Large Effective Area Single Mode Fiber PureGuide -LA SM Optical Fiber, TIA Type IVd ITU G.655 C and D Compliant Issued:
GOF Indoor and Outdoor Cables. Documentation VWL Version 1.1 Source Code M
GOF Indoor and Outdoor Cables Documentation VWL 064.503 Version 1.1 Source Code M GOF Installation Cables Cable matrix / overview Source code M Use Indoor In- / Outdoor Outdoor Type of cable Breakout Mini-
Qualification Test Report LightCrimp* Plus Singlemode and Multimode LC Connector (Field Installable)
Qualification Test Report LightCrimp* Plus Singlemode and Multimode LC Connector (Field Installable) 501-586 26Feb09 Rev F 1. INTRODUCTION 1.1. Purpose Testing was performed on Tyco Electronics LightCrimp*
FiberExpress Solutions
7.2.1-A 7.2.1-B 7.2.1-C 7.2.1-D Simplex Patch Cord Duplex Patch Cord Hybrid Patch Cord Single-ended (pigtails) AX200057 Patch Cord Multimode SC Duplex DESCRIPTION FiberExpress Simplex and Duplex Patch
MT-RJ Optical Fiber System Field Testing
MT-RJ Optical Fiber System Field Testing Table of Contents INTRODUCTION... 3 TEST JUMPERS... 4 LAUNCH CONDITIONS... 4 MT-RJ TEST KITS... 5 MT-RJ SYSTEM TESTING: Fixed transmit and receive (SC or ST-style)
Jan07 Rev B
Qualification Test Report 501-545 05Jan07 Rev B MT-RJ Patch Panel and Outlet Jacks (Standard, XG, SECURE and SECURE XG) 1. INTRODUCTION 1.1. Purpose Testing was performed on Tyco Electronics MT-RJ Jack,
Firetuf OFC-UT-CST Fire resistant Armoured Central Tube Cable, variant in red
OFC-UT-CST Fire resistant Armoured Indoor/Outdoor steel tape armoured (CST) double LSHF-FR sheathed optical cable with 2 24 fibres. VDE: A/I-DQ(ZN)H(SR)H 3rd party verification of the fire tests by BUREAU
/Oct/2014 Rev B
Product Specification 108-93042 07/Oct/2014 Rev B Class EA shielded solid Patch cords 1. SCOPE 1.1 Content This specification describes performance and material requirements and tests procedures for TE
Qualification Test Report LC Duplex Adapter For LC Cutouts
Qualification Test Report LC Duplex Adapter For LC Cutouts 501-683 09Mar09 Rev B 1. INTRODUCTION 1.1. Purpose Testing was performed on Tyco Electronics LC Duplex Adapters for LC Cutouts, to determine their
STANDARD FOR INDOOR-OUTDOOR OPTICAL FIBER CABLE
STANDARD FOR INDOOR-OUTDOOR OPTICAL FIBER CABLE Publication # ICEA S-104-696 Second Edition March 2013 2013 by ICEA INSULATED CABLE ENGINEERS ASSOCIATION, Inc. STANDARD FOR INDOOR-OUTDOOR OPTICAL FIBER
HELKAMA. Optical Fibre Cables
1 Contents Optical fibres and their characteristics Cable constructions Cable tests Installation, jointing and terminating Manufacturing (pictures) 2 Multimode Fibre (GK) Attenuation and Bandwidth Fibre
Copper LAN cable. This specification describes the general requirements for AMP NETCONNECT* copper LAN cable.
Product Specification 108-93018 25/Aug/2011 Rev H Copper LAN cable 1. SCOPE 1.1. Content This specification describes the general requirements for AMP NETCONNECT* copper LAN cable. 2. APPLICABLE DOCUMENTS
13-SDMS-02 REV. 00 SPECIFICATIONS FOR NON-METALLIC, TIGHT BUFFERED & RETRACTABLE, MICRO FIBER OPTIC CABLE FOR INTERNAL INSTALLATION
13-SDMS-02 REV. 00 SPECIFICATIONS FOR NON-METALLIC, TIGHT BUFFERED & RETRACTABLE, MICRO FIBER OPTIC CABLE FOR INTERNAL INSTALLATION This specification is property of SEC and subject to change or modification
/Oct/2014 Rev E
Product Specification 108-93017 14/Oct/2014 Rev E Cat 6 Unshielded Patch Cords 1. SCOPE 1.1 Content This specification describes performance and material requirements and tests procedures for TE Connectivity
STANDARD FOR INDOOR-OUTDOOR OPTICAL FIBER CABLE
ANSI/ICEA S-104-696-2001 STANDARD FOR INDOOR-OUTDOOR OPTICAL FIBER CABLE Publication S-104-696 First Edition - September 2001 Published By Insulated Cable Engineers Association, Inc. Post Office Box 1568
Apr06 Rev A
Qualification Test Report LC, Multimode, One-Piece Housing, Fiber Optic Connector 501-628 03Apr06 Rev A 1. INTRODUCTION 1.1. Purpose 1.2. Scope Testing was performed on Tyco Electronics LC multimode, one-piece
Fiber Optic Patch Cord and Pigtails
Fiber Optic Patch Cord and Pigtails Description The optical fiber patch cords are fitted at both ends with same connector types or different connector types. Our fiber optic patch cords are ultra reliable
Cat 6 Shielded Patch cords
Product Specification 108-93010 14/Oct/2009 Rev E Cat 6 Shielded Patch cords 1. SCOPE 1.1 Content This specification describes performance and material requirements and tests procedures for AMP NETCONNECT*
Fibre optic media options and trends
Fibre optic media options and trends Presented by D Stockton & P Lascelles of Miniflex Ltd, branded as m2fx 23 February 2012 1 Contents Cable constructs Indoor/outdoor LSZH Armouring Micro Bends Singlemode,
TE Connectivity's AMP NETCONNECT Cable Management
One of the major challenges facing cabling mounting holes installers and maintenance personnel is organizing distribution cables and patch cords in the telecommunications room. TE Connectivity's AMP NETCONNECT
Jul07 Rev C
Product Specification 108-2167 11Jul07 Rev C MPO and MPO SECURE Multimode Fiber Optic Connector and Adapter 1. SCOPE 1.1. Content This specification, which is based on GR-1435-CORE, covers the performance,
. SECTION CONTROL-VOLTAGE ELECTRICAL POWER CABLES
. SECTION 260523 - CONTROL-VOLTAGE ELECTRICAL POWER CABLES PART I - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
Universal Connectivity Platform A Modular Approach to Infrastructure Design
A Modular Approach to Infrastructure Design TE Connectivity s Universal Connectivity Platform (UCP) provides a fully modular approach to designing data centers and telecommunications rooms. This patch
Cat 6 Unshielded Patch cords
Product Specification 108-93017 13/Oct/2009 Rev D Cat 6 Unshielded s 1. SCOPE 1.1 Content This specification describes performance and material requirements and tests procedures for AMP NETCONNECT* Cat
TELECOM SOLUTIONS CABLE CATALOGUE INNOVATIVE FIBRE OPTIC CABLE SOLUTIONS
TELECOM SOLUTIONS CABLE CATALOGUE INNOVATIVE FIBRE OPTIC CABLE SOLUTIONS TKF TECHNOLOGICAL LEADERSHIP IN CONNECTIVITY SOLUTIONS Since its establishment in 90 TKF developed from a cable producer to a leading
Specification No.CSC-131/R-1/DH//UH/P&D/ Technical Specifications. for 24 Fiber/48 Fiber Unarmoured. Underground Fibre.
Specification No.CSC-131/R-1/DH//UH/P&D/2016-17 Technical Specifications for 24 Fiber/48 Fiber Unarmoured Underground Fibre Optic Cabling Issue Month:June-2016 (CSC Amendment date 14.06.2016) Common Specification
OPTICAL FIBER SOLUTIONS
www.ofsoptics.com/medical OPTICAL FIBER SOLUTIONS FOR YOUR MEDICAL DEVICE ISO 9001 and 13485 Certified FDA Good Manufacturing Practices USP Class VI and ISO10993 for Biocompatibility Low Bioburden Assembly
Product Specification CAT 6 UNSHIELDED PATCH CORDS
Product 108-93017 Specification 23/Nov/06 Rev. A CAT 6 UNSHIELDED PATCH CORDS 1. SCOPE 1.1 Content This specification describes performance and material requirements and tests procedures for NETCONNECT
CHALLENGE OF THE NEW OPTICAL FIBRE TECHNOLOGIES
THE CHALLENGE OF THE NEW OPTICAL FIBRE TECHNOLOGIES 17th September 2002 Botanical Gardens Birmingham The Way We Were 1GbE and 10GbE OF Categories Channel Design Cleaning SFF Connecting Hardware Testing
Fire Control Panels. Multiple Signal Fiber Optic Modems and Accessories for Panel and Remote Mounting. Features. Operation.
UL, ULC Approved* Fire Control Panels Multiple Signal Fiber Optic Modems and Accessories for Panel and Remote Mounting Features Converts multiple fire alarm communications signals into a single fiber optic
Fibre Specification Standards
Fibre Specification Standards User Manual The most important thing we build is trust Cobham Wireless - Coverage Table of Contents 1. Single-mode Fibre to ITU-T Recommendation G.652 3 2. SC/APC Mated Pair
Mar11 Rev B
Product Specification 108-1576-2 11Mar11 Rev B NETCONNECT*, CHAMP* System 5 Modular Jack Patch Panel 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for NETCONNECT*
Qualification Test Report. AMP-TWIST Series Jacks for Class EA systems
Qualification Test Report 501-93032 14/April/2011 Rev A AMP-TWIST Series Jacks for Class EA systems 1. INTRODUCTION 1.1 Purpose Qualification testing on AMP-TWIST* Series Jacks for Class E A Systems, to
4120 Fire Alarm Network Reference
4120 Fire Alarm Network Reference Features Autocall 4120 Fire Alarm Network communications are available for wired or fiber optic connections Wired communications are available on Network Interface Cards
Attenuators. Fiber Optic Products Catalog. Singlemode Build Out Attenuators. Product Facts. Applications. Customizable Features. Available Collateral
Attenuators Build Out Attenuators Product Facts A range of fixed attenuation values. Standard values of 1 through 20 and 25dB UPC and APC offer Excellent Return Loss LC, SC, FC, ST, and D4 styles Attenuation
LAPP GROUP NORTH AMERICA CABLE ATTRIBUTES QUICK GUIDE
LAPP GROUP NORTH AMERICA CABLE ATTRIBUTES QUICK GUIDE LAPP User Guide Through continual Research & Development and the extensive knowledge of our engineers; the Lapp Group has developed criteria which
RLH Industries, Inc. Cleaning and Testing Fiber Optic Cable. Reference Guide MD A 0507
RLH Industries, Inc. Cleaning and Testing Fiber Optic Cable Reference Guide MD-019 2014A 0507 RLH Industries, Inc. Copyright 2013 RLH Industries, Inc. All rights reserved. No part of this document may
Category 5e Products
Category 5e Products 25 Year System Performance Coverage* We are confident that your AMP NETCONNECT cabling system will keep performing to current TIA/EIA industry standards. If the registered system ever
CAT5E DIRECT BURIAL (FLOODED CORE) 24AWG, UTP, 4 PAIR, SOLID 1000 PULL BOX /CMXF
POST CAT5E DIRECT BURIAL (FLOODED CORE) 24AWG, UTP, 4 PAIR, SOLID 1000 PULL BOX PART NUMBER: 059-485/CMXF 1 APPROVALS: MARKETING DATE: THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO VERTICAL
SPECIAL ELECTRICAL AND OPTICAL CABLES
SPECIAL ELECTRICAL AND OPTICAL CABLES INTRODUCTION The new high-speed trains and the sensible increase of the traffic, with congested lines, is the result of the latest development of the rail sector.
AMP NETCONNECT Category 5E SL Shielded Cabling System. 1. General Description
Category 5E SL Shielded Cabling System Table of Content: 1. General System 7.1. DIN Style Faceplates & Outlets 2. System Cables 7.2. 45x45 MOSAIC Style Faceplates & Outlets 3. Category 5E Shielded SL (SlimLine)
--> Buy True-PDF --> Auto-delivered in 0~10 minutes. YD/T Translated English of Chinese Standard: YD/T
Translated English of Chinese Standard: YD/T1447-2013 www.chinesestandard.net Sales@ChineseStandard.net COMMUNICATION INDUSTRY STANDARD OF THE PEOPLE S REPUBLIC OF CHINA YD ICS 33.180.10 M 33 Replacing
Qualification Test Report 1/Jul/2005 Rev. A
Qualification Test 501-93013 Report 1/Jul/2005 Rev. A AMP CO 10 Gigabit/s Insert PN 1711188-X 1. INTRODUCTION 1.1 Purpose Testing was performed on AMP* CO 10 Gigabit/s Insert, to determine its conformance
DNVGL-CP-0402 Edition February 2016
CLASS PROGRAMME Type approval DNVGL-CP-0402 Edition February 2016 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
Technical Publication
Technical Publication Installation Guidelines - HELIAX FiberFeed Solutions for RRH Systems Fiber/Copper Cables: RFF-16SM-812-APE RFF-16SM-810-APE RFF-16SM-808-APE Related Support and Learning Opportunities
/Mar/2014 Rev A
Qualification Test Report 501-93038 21/Mar/2014 Rev A MPOptimate FO Microcassette 12 fiber MPO-12xLC/PC 1. INTRODUCTION 1.1 Purpose Tests performed on MPOptimate FO Microcassette 12 fiber MPO-12xLC/PC,
SiBar Thyristor Surge Protectors. TVBxxxNSA-L Series. Benefits: Features: Applications:
Raychem Circuit Protection's SiBar thyristor surge protection devices are designed to help protect sensitive telecommunication equipment from the hazards caused by lightning, power contact, and power induction.
COMMERCIAL PROTOCOLS AND AEROSPACE CABLING: FINDING THE RIGHT BALANCE
COMMERCIAL PROTOCOLS AND AEROSPACE CABLING: FINDING THE RIGHT BALANCE Robert Moore, Principal Engineer High Speed Specialist AEROSPACE, DEFENSE & MARINE /// WHITE PAPER - COMMERCIAL PROTOCOLS AND AEROSPACE
A. General: Horizontal and backbone cabling shall be verified in accordance with ANSI/TIA/EIA-568-C and the addendum for fiber optic testing.
3.4 TESTING OF FIBER OPTICS CABLING A. General: Horizontal and backbone cabling shall be verified in accordance with ANSI/TIA/EIA-568-C and the addendum for fiber optic testing. B. General: In the event
Special Provision No. 683S28 December 2017
FIBRE OPTIC COMMUNICATION CABLES, AERIAL ON MESSENGER CABLE - Item No. FIBRE OPTIC COMMUNICATION CABLES, AERIAL ON MESSENGER CABLE (TEMPORARY) - Item No. Special Provision No. 683S28 December 2017 1. SCOPE
STANDARD CONFORMANCE
STANDARD CONFORMANCE IEC 60331-11, Tests for electric cables under fire conditions- Circuit integrity- Fire alone at a flame temperature of at least 750C IEC 60331-21, Tests for electric cables under fire
SOLARLOK Interconnection System Installation Manual
SOLARLOK Interconnection System 1. Safety Note! n The SOLARLOK connector is to be used only to interconnect firmly fixed cables. n Do not disconnect under electrical load! n Electrical current path should
SECTION COMMUNICATIONS FIBER CABINETS, ADAPTERS AND CONNECTORS
SECTION 27 11 20 COMMUNICATIONS FIBER CABINETS, ADAPTERS AND CONNECTORS PART 1 GENERAL 1.01 DESCRIPTION A. The work covered by this section of the Specifications includes all labor necessary to perform
Fibre (TIA) Field Test Specification
This document has been prepared to aid consultants or engineers in developing contractual specifications covering the testing of duplex fibre optic cabling installations. It is offered as a general guide.
Tether and Umbilical Cables for Remotely Operated Vehicles
Tether and Umbilical Cables for Remotely Operated Vehicles 6000 meters down is no place for cable failure TE Connectivity (TE) helps you go deep, whether it s to the ocean floor, the bottom of a mine,
Ribbon Breakout Kit Installation Instructions
Ribbon Breakout Kit Installation Instructions LOOSE BUFFER TUBE RIBBON KIT BLK-RLBT- (SEE PAGE 3) CENTRAL OVAL TUBE RIBBON KIT BLK-RCT- (SEE PAGE 12) RIBBON CENTRAL TUBE KIT BLK-RCT- (SEE PAGE 20) 19645-A
4-Channel Contact Closure Fiber Link Card System
USER GUIDE RLH Industries, Inc. The leader in rugged fiber optic technology. U-020 2017A-0330 4-Channel Contact Closure Fiber Link Card System SYSTEM INSTALLATION INFORMATION Description The 4 Channel
SECTION COMMUNICATIONS PATCH CORDS, STATION CORDS AND CROSS CONNECT WIRE
SECTION 27 16 19 COMMUNICATIONS PATCH CORDS, STATION CORDS AND CROSS CONNECT WIRE PART 1 GENERAL 1.01 DESCRIPTION A. The work covered by this section of the Specifications includes all labor necessary
9 W, 15 W and 25 W Industrial Fiber Laser Systems IFL Series
COMMERCIAL LASERS 9 W, 15 W and 25 W Industrial Fiber Laser Systems IFL Series Key Features Diffraction-limited light delivered through fiber termination module Single transverse mode, collimated beam
SECTION CONDUCTORS AND CABLES FOR ELECTRONIC SAFETY AND SECURITY
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 28 05 13 CONDUCTORS AND CABLES FOR ELECTRONIC SAFETY AND SECURITY SPEC WRITER NOTE: Use this section only for NCA projects. Delete between // // if not applicable
Acceptance Requirements. Fibre Optic Systems. Revised 12/2017. December 5th, Alexander Kölbel
December 5th, 2017 Acceptance Requirements Fibre Optic Systems Revised 12/2017 Alexander Kölbel +49 6190 8880-40 alexander.koelbel@datwyler.com Dätwyler Cables GmbH, Auf der Roos 4-12, 65795 Hattersheim,
Telephone and Data Structured Wiring
Data Specification Category 6A General Telephone and Data Structured Wiring The Electrical Sub-Contractor shall employ a specialist sub-contractor to provide the following systems:- Manufacturer System
Introducing Hermaphroditic Blade and Receptacle Connector
Introducing Hermaphroditic Blade and Receptacle Connector Wire-to-Board, Board-to-Board and Dust Cover Hermaphroditic Blade and Receptacle Connector : Wire-to-Board KEY FEATURES Available in 2, 4, and
Hands-On Fiber Optics ISP/OSP - Advanced Combo- Tech
Hands-On Fiber Optics ISP/OSP - Advanced Combo- Tech Course Description This Hands-On 3-day course has been customized to provide technicians with a practical understanding of fiber optic theory and fiber
Wire and Cable. For more information on these Tyco Electronics products, visit the following website:
26 Wire and Cable Raychem High Performance Wire and Cable....26-2 to 26-4 Madison Cable Products...................26-5 to 26-7 Reference the following cables in Section 15 of this catalog: Premises Networking
Fire Control Panels. Multiple Signal Fiber Optic Modems and Accessories for 4120 Network. UL, ULC, CSFM Listed; FM Approved* Features
Fire Control Panels UL, ULC, CSFM Listed; FM Approved* Features Compatible with Simplex 4120 Network Converts multiple 4120 network communications signals into a single fiber optic link to: Multiplex audio
Pneumatic Tubing POLYTUBING O.D. 5/32"
Pneumatic Tubing POLYTUBING O.D. 5/32" 1/4" 3/8" 1/2" PART NR COLOR COIL LENGTH MASTER PACK MASTER PACK WT. 1063636 TWIN TUBE 500' 1000' 16# 1063635 BLACK 500' 2000' 17# 1063641 BLUE 500' 2000' 17# 1063765
SiBar Thyristor Surge Protectors. TVBxxxSA-L Series. Benefits: Features: Applications:
Raychem Circuit Protection's SiBar thyristor surge protection devices are designed to help protect sensitive telecommunication equipment from the hazards caused by lightning, power contact, and power induction.
Fiber Optics. VIS / NIR Multimode, Feedthroughs. Ultrahigh Vacuum CF Flange Feedthrough. 4 x 1 CF Flange Feedthrough
VIS / NIR Multimode, Feedthroughs CCU-GLSS Ultrahigh Vacuum CF Flange Feedthrough 0.950 1.250 133 CF 275 CF 105020, UHV CF Flange 0.85 feedthrough circle Premium SM 905 Number Fiber Connector CF Flange
Flame Retardant Polyethylene Tubing
Flame Retardant Polyethylene Tubing Classified Under U.L. 1820. Performance Pipe DRISCOPLEX 2600 Instube Flame Retardant (FR) Polyethylene Tubing For Pneumatic Instrument Controls PERFORMANCE PIPE is the
STAND OUT FROM THE CROWD. Bisham Abbey, 14th May 2002 INTRODUCTION. Work Smart FIA. The Fibreoptic Industry Association STAND OUT FROM THE CROWD
INTRODUCTION Work Smart FIA STAND OUT FROM THE CROWD 14th May 2002, Bisham Abbey Mike Gilmore 2002 Fibreoptic Industry Association Work Smart www.it-cabling.com www.e-readybuilding.com PO Box MT65, LEEDS,
Application Engineering Note. Importance of Jacket Crimping
Importance of Jacket Crimping SENKO Product Datasheet 2003 by SENKO Advanced Components All Rights Reserved Date: 01/11/2018 ISO 9001: 2000 Purpose Crimping or rather crimping strength is essential to
VTI Services Technical Bulletin (TB) OTDR Measurement of Installed Optical Fibre Cabling Permanent Links and Links
VTI Services Technical Bulletin (TB) OTDR Measurement of Installed Optical Fibre Cabling Permanent Links and Links TB Number 004 This bulletin is supplied for information only and is intended to provide
Four channel video link For low cost video transmission
User Manual Four channel video link For low cost video transmission CFO First Mile series consist of fi bre optic modems which provide a high quality and losless video transmission for variety of CCTV
Hands-On Fiber Optic ISP / OSP Combo-Tech Splicing, Termination & Testing
Hands-On Splicing, Termination & Testing BICSI CECs This course has been approved for CEC credits by BICSI. Please read below for a breakdown of the credits that we offer for this course. For more information