MAXLITE RKT LED Retrofit Kit

Size: px

Start display at page:

Download "MAXLITE RKT LED Retrofit Kit"

Julius Allen
6 years ago
Views:

Operating Instructions MAXLITE RKT LED Retrofit Kit Description and Intended Use The RKT LED Retrofit Kit is a high performance LED Fixture upgrade kit designed to replace the original components

The panels are fully dimmable and compatible with building controls, motion sensors, timers, and daylight harvesting systems. The design of the panels produces an even, consistent shadowless light.

1 Operating Instructions MAXLITE RKT LED Retrofit Kit Description and Intended Use The RKT LED Retrofit Kit is a high performance LED Fixture upgrade kit designed to replace the original components inside 2 x2 and 2 x4 fluorescent fixtures. The RKT LED Retrofit Kit is suitable for office, school, hospital and medical facility applications. The panels are fully dimmable and compatible with building controls, motion sensors, timers, and daylight harvesting systems. The design of the panels produces an even, consistent shadowless light. The LEDs enable long life, high lumen maintenance, high CRI, and low maintenance, and are constructed without hazardous materials. Construction The LED carriage is constructed of sheet steel, providing heat sink and thermal control capabilities. Attached are four LED strips, constructed from FR4 resin boards, which are mounted onto the carriage with fasteners and added contact via plastic hold down clips. Provisions are also provided to mount the kit to existing fluorescent ceiling panels. Control With a standard integrated driver, the panels operate with a standard 0-10V wall control, (not included) for wall control dimming. Up to 20 panels can be linked to each master panel. Specifications Model Watts Lumen Volts CCT Weight Dimensions(in) L W D RKT4514U5535DV 55W 4, V 3500K 8 lb /8 2 RKT4514U5541DV 55W 4, V 4100K 8 lb /8 2 RKT4514U5550DV 55W 4, V 5500K 8 lb /8 2 RKT2014U4527DV 45W 3, V 2700K 6 lb RKT2014U4535DV 45W 3, V 3500K 6 lb RKT2014U4541DV 45W 4, V 4100K 6 lb

2 Maxlite RKT LED Retrofit Kit 2

3 General Safety Information 1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS. 2. Review the diagrams thoroughly before beginning. If you feel you do not have electrical wiring experience, have your fixture installed by a qualified licensed electrician. 3. All electrical connections must be in accordance with local codes, ordinance, and the National Electric Code. If you are unfamiliar with methods of installing electrical wiring, secure the services of a qualified licensed electrician. 4. Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the appropriate fuse at the fuse box. Turning the power off using the light switch is not sufficient to prevent electrical shock. 5. Do not use outdoors. 6. Equipment should be mounted in location and at heights where it will not readily be subject to tampering by unauthorized personnel. 7. Do not use this equipment for other than intended use. 8. All servicing should be performed by qualified personnel only. 1. WARNING - Risk of fire or electric shock. Install this kit only in the luminaires that has the construction features and dimensions shown in the photographs and/or drawings. 2. WARNING - Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation 3. WARNING - Risk of fire or electric shock. Reflector kit installation requires knowledge of fluorescent lighting luminaires electrical systems. If not qualified, do not attempt installation. Contact qualified electrician. 3

4 Fluorescent Wiring Diagram Rapid Start: Instant Start: 1. REMOVE WIRING, LAMPHOLDERS, BALLASTS, OR ANY OTHER ELECTRICAL COMPONENTS ENLEVEY TOUTES LES CONNECTIONS, CABLES, DOUILLE DE LAMPE, BALLAST ET COMPOSANT ELECTRIQUE 2. MIN LAMP COMPARTMENT DIMENSIONS (SEE PG.1 FOR KIT DIMENSIONS). DIMENSIONS DE COMPARTEMENTS DE LAMPE MINIMUM (VOIRE PG.1 POUR DIMENSIONS) 4

5 Retrofit Kit Wiring Diagram Connecting panels to AC source supply: 1. All units must be individually connected to the AC supply ( VAC): Black = Line White = Neutral 2. Line connection to be made to switch lead from source. 5

6 INSTALLATION OF THIS RETROFIT ASSEMBLY REQUIRES A PERSON FAMILIAR THE CONSTRUCTION AND OPERATION OF FLUORESCENT LUMINAIRE ELECTRICAL SYSTEMS AND THE HAZARD INVOLVED CONIFIER L INSTALLATION DE CE NECESSAIRE DE MODERISATION A UNE PERSONNE CONNAISSANT LA CONSTRUCTION ET LE FONCTIONNEMENT DES INSTALLATIONS D ECLAIRAGE FLUORESCENT ET CONSCIENTE DES RISQUES QU ELLES COMPORTENT UNLESS OTHERWISE INDICATED, DO NOT MAKE OR ALTER ANY OPENINGS IN THE COMPARTMENT OF WIRING OR ELECTRICAL COMPONENTS DURING INSTALLATION OF THIS RETROFIT ASSEMBLY. PLUG ALL UNUSED OPENINGS IN THE COMPARTMENT OF WIRING OR ELECTRICAL COMPONENTS A MOINS D INDICATION CONTRAIRE, NE PAS PRATIQUER NI MODIFIER DES OUVERTURES DANS LES COMPARTIMENTS CONTENANT DES CABLES OU DES COMPOSANTS ELECTRIQUES LORS DE L INSTLLATION DE CE NECESSAIRE DE MODERISATION. BOUCHER TOUTES LES OUVERTURES COMPOSANTS ELECTRIQUES TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR OTHER SHARP OBJECTS POUR PREVENIR TOUT DOMMAGE ET USURE, NE PAS EXPOSER LES CIRCUITS AUX BORDS DEL TOLE OU D AUTTRES OBJET POINTUS. DISCONNECT THE POWER BY TURNING OFF THE CIRCUIT BREAKER OR BY REMOVING THE APPROPRIATE FUSE AT THE FUSE BOX. TURNING THE POWER OFF USING THE LIGHT SWITCH IS NOT SUFFICIENT TO PREVENT ELECTRICAL SHOCK. DEBRANCHEZ L ALIMENTATION EN ETEIGNANT LE DISJONCTEUR OU PAR ENLEVER LE CORRECT FUSIBLE DE LA BOITE A FUSIBLES. ETEIGNER L ALIMENTATION EN UTILISANT L INTERRUPTEUR N EST PAS SUFFISANT OUR PREVENIR TOUT DANGER ELECTRIQUE THE RETROFIT ASSEMBLY IS ACCEPTED AS A COMPONENT OF A FLUORESCENT LUMINAIRE WHERE THE SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY CSA OR AUTHORITIES HAVING JURISDICTION LE NECESSAIRE DE MODERNISATION EST ACCEPTE EN TANT QUE COMPOSANT D UN LUMINAIRE FLUORESCENT, SOUS RESERVE D APPROBATION DE L ENSEMBLE PAR LA CSA OU PAR LES POUVOIRSDE REGLEMENTATION 6

Use safety S hook provided to hang Retrofit Kit to the edge of existing fixture.

7 Mounting 1. Remove diffuser, fluorescent tubes and all other internal components. Disconnect fluorescent ballast from power wires. 2. Use safety S hook provided to hang Retrofit Kit to the edge of existing fixture. Once secure, attach existing power wires to Retrofit Kit power wires (Black to Black and White to White). 7

The self-tapping screws should have a sleeve provided that helps retain them when

8 3. Install the fasteners or self-tapping screws provided with the kit to secure the Retrofit kit to the bottom of existing fixture. The self-tapping screws should have a sleeve provided that helps retain them when put through the panel. They also hold the screw in place for one man operation of installing. 4. Reinstall fixture diffuser. 8

Installation & Operation Disconnect the power before installing or serving. Set-up for 0-10V ballast dimmer or building controls: 1. Open access cover 2. Follow connection power on page 5. 3.

9 Installation & Operation Disconnect the power before installing or serving. Set-up for 0-10V ballast dimmer or building controls: 1. Open access cover 2. Follow connection power on page Connect non relay wires violet/grey from central system to violet/grey wires of driver. 4. Connect relay wires from central system red/blue to red/blue of relay. 5. Connect remaining power wires black from driver to relay line, white wire from driver to relay neutral connect to neutral. 6. Mount panel and operate. 9

10 Set-up for wall dimming (0-10V): 1. Follow connection power on page 5 2. Connect violet and grey wires from wall dimmer to violet and grey wires on driver. 3. Connect appropriate relay pack if necessary. Follow wire diagram provided. 10

Set-up for linking panels: 1. Follow connection power on page 5. 2. Select one of the panels to be the master panel. 3. Connect dimmer/central system to this panel. 4.

11 Set-up for linking panels: 1. Follow connection power on page Select one of the panels to be the master panel. 3. Connect dimmer/central system to this panel. 4. Daisy chain remaining panels in zone by connecting violet/grey wires from panel to panel. 5. Up to 20 panels can be linked together with 20 control wiring between each panel. *Lutron PP-20 power pack relay not included. 6. Use 18/20 AWG for control wires. 11

Lumination TM Volumetric Retrofit Kit

GE Lighting Installation Guide Lumination TM Volumetric Retrofit Kit BEFORE YOU BEGIN Read these instructions completely and carefully. WARNING AVERTISSEMENT RISK OF FIRE OR ELECTRIC SHOCK Luminaire wiring