This document is a preview generated by EVS

Transcription

1 INTERNATIONAL STANDARD NORME INTERNATIONALE IEC Edition colour inside Photovoltaic power generating systems EMC requirements and test methods for power conversion equipment Systèmes de production d énergie photovoltaïque Exigences de CEM et méthodes d essai pour les équipements de conversion de puissance IEC 62920: (en-fr)

2 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'iec ou du Comité national de l'iec du pays du demandeur. Si vous avez des questions sur le copyright de l'iec ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez les coordonnées ci-après ou contactez le Comité national de l'iec de votre pays de résidence. IEC Central Office Tel.: , rue de Varembé Fax: CH-1211 Geneva 20 info@iec.ch Switzerland About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and ipad. IEC publications search - The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee, ). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by . Electropedia - The world's leading online dictionary of electronic and electrical terms containing terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csc@iec.ch. A propos de l'iec La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l édition la plus récente, un corrigendum ou amendement peut avoir été publié. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spécifications techniques, Rapports techniques et autres documents de l'iec. Disponible pour PC, Mac OS, tablettes Android et ipad. Recherche de publications IEC - La recherche avancée permet de trouver des publications IEC en utilisant différents critères (numéro de référence, texte, comité d études, ). Elle donne aussi des informations sur les projets et les publications remplacées ou retirées. IEC Just Published - webstore.iec.ch/justpublished Restez informé sur les nouvelles publications IEC. Just Published détaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par . Electropedia - Le premier dictionnaire en ligne de termes électroniques et électriques. Il contient termes et définitions en anglais et en français, ainsi que les termes équivalents dans 16 langues additionnelles. Egalement appelé Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary entrées terminologiques électrotechniques, en anglais et en français, extraites des articles Termes et Définitions des publications IEC parues depuis Plus certaines entrées antérieures extraites des publications des CE 37, 77, 86 et CISPR de l'iec. Service Clients - webstore.iec.ch/csc Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csc@iec.ch.

3 INTERNATIONAL STANDARD NORME INTERNATIONALE IEC Edition colour inside Photovoltaic power generating systems EMC requirements and test methods for power conversion equipment Systèmes de production d énergie photovoltaïque Exigences de CEM et méthodes d essai pour les équipements de conversion de puissance INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS ISBN Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé. Registered trademark of the International Electrotechnical Commission Marque déposée de la Commission Electrotechnique Internationale

4 2 IEC 62920:2017 IEC 2017 CONTENTS FOREWORD... 5 INTRODUCTION Scope Normative references Terms and definitions Classification of PCE Category of environment Division into classes Information for users Test setup for type test General Configuration of test setups General Setups for immunity requirement test Setups for low frequency emission requirement test Setups for high frequency emission requirement test Operating conditions during testing General Operating conditions for immunity requirement test Operating conditions for low frequency emission requirement test Operating conditions for high frequency emission requirement test Immunity requirements Requirements Performance criteria Emission requirements Low frequency High frequency Conducted emission Radiated emission Test results and test report Annex A (informative) Configuration examples of test setups A.1 General A.2 Setups for immunity requirement test A.2.1 Electrostatic discharge A.2.2 Radiated disturbances A.2.3 Electrical fast transient/burst A.2.4 Surge A.2.5 Conducted disturbances, induced by radio-frequency fields A.2.6 Voltage dips and interruption A.3 Setups for high frequency emission requirement test A.3.1 Conducted disturbances A.3.2 Radiated disturbances Annex B (informative) Setups for low frequency emission requirement test B.1 General B.2 Example of a test circuit for low frequency emission requirement test B.2.1 Harmonics... 40

5 IEC 62920:2017 IEC B.2.2 Voltage fluctuations and flicker Annex C (informative) Test setup for conducted disturbance measurement C.1 General C.2 Examples of a test setup Annex D (informative) Alternative test methods for high-power PCE D.1 General D.2 Alternative method for immunity requirement test D.2.1 Alternative method for EFT/burst immunity test D.2.2 Alternative method for surge test D.2.3 Alternative test method for conducted disturbances, induced by radiofrequency fields D.2.4 Conducted disturbances measurement Bibliography Figure 1 Example of ports Figure 2 Examples of installation of PV systems in both environments Figure 3 Overview of harmonic requirements up to 75 A Figure 4 Overview of voltage change requirements up to 75 A Figure A.1 Example of a test setup for direct application of discharges to PCE Figure A.2 Example of a test setup for indirect application of discharges to PCE Figure A.3 Example of a test setup for wall-mounted PCE Figure A.4 Example of a test setup for direct coupling of the test voltage to AC mains power ports Figure A.5 Example of a test setup for application of the test voltage with a capacitive coupling clamp Figure A.6 Example of a test setup for AC mains power ports Figure A.7 Example of a test setup for DC power ports Figure A.8 Example of a setup of conducted disturbances immunity test applied for wall-mounted PCE Figure A.9 Example of a test setup using a generator for voltage dips and short interruptions Figure A.10 Example of a test setup of conducted disturbances measurement applied for wall-mounted PCE Figure A.11 Example of a test setup of conducted disturbances measurement applied for wall-mounted PCE with power circulation Figure A.12 Example of a test setup of conducted disturbances measurement applied for wall-mounted PCE with direct connection to AC mains Figure A.13 Example of a test setup of radiated disturbances measurement applied for wall-mounted PCE Figure B.1 Measurement circuit for single-phase two-wire PCE Figure B.2 Measurement circuit for single-phase three-wire PCE Figure B.3 Measurement circuit for three-phase three-wire PCE Figure B.4 Measurement circuit for three-phase four-wire PCE Figure B.5 Measurement circuit for single-phase two-wire PCE Figure B.6 Measurement circuit for single-phase three-wire PCE Figure B.7 Measurement circuit for three-phase three-wire PCE Figure B.8 Measurement circuit for three-phase four-wire PCE... 43

6 4 IEC 62920:2017 IEC 2017 Figure C.1 Example of a standardized test setup for conducted disturbances measurement with AC mains power supply Figure C.2 Example of a standardized test setup for conducted disturbances measurement with a laboratory AC power source Figure D.1 Example of an alternative method for EFT/Burst immunity test Figure D.2 Example of an alternative coupling/decoupling network for AC mains power ports Figure D.3 Example of a test setup applying clamp injection method to AC mains power ports Figure D.4 Alternative test method of conduced disturbances measurement using artificial networks as voltage probes Table 1 Immunity requirements for class B PCE Table 2 Immunity requirements for class A PCE Table 3 Voltage dips and interruption immunity requirements for class B PCE Table 4 Voltage dips and interruption immunity requirements for class A PCE Table 5 Performance criteria for immunity tests Table 6 Disturbance voltage limits at the AC mains power port for class A PCE measured on a test site Table 7 Disturbance voltage limits at the AC mains power port for class B PCE measured on a test site Table 8 Disturbance limits at the DC power port for class A PCE measured on a test site. 26 Table 9 Disturbance limits at the DC power port for class B PCE measured on a test site. 26 Table 10 Limits of conducted common mode (asymmetric mode) disturbance at the wired port for class A PCE Table 11 Limits of conducted common mode (asymmetric mode) disturbance at the wired port for class B PCE Table 12 Electromagnetic radiation disturbance limits for class A PCE measured on a test site Table 13 Electromagnetic radiation disturbance limits for class B PCE measured on a test site... 28

7 IEC 62920:2017 IEC INTERNATIONAL ELECTROTECHNICAL COMMISSION PHOTOVOLTAIC POWER GENERATING SYSTEMS EMC REQUIREMENTS AND TEST METHODS FOR POWER CONVERSION EQUIPMENT FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as IEC Publication(s) ). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and nongovernmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC has been prepared by IEC technical committee 82: Solar photovoltaic energy systems. The text of this International Standard is based on the following documents: FDIS 82/1288/FDIS Report on voting 82/1313/RVD Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2.

8 6 IEC 62920:2017 IEC 2017 The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under " in the data related to the specific document. At this date, the document will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The 'colour inside' logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer.

9 IEC 62920:2017 IEC Background INTRODUCTION Power conversion equipment (PCE) is indispensable for solar photovoltaic power energy systems in order to convert the DC electric power energy generated by solar photovoltaic panels into AC electric power, and to feed the AC power energy into the AC mains network or loads. In recent years, standardization of EMC requirements for PCE has become more active. For example, CISPR/B has been considering the limits and measurement method for conducted disturbances at DC power ports of grid connected power converters since These proposed limits and measurement methods form the basis of the instructions for supplementing CISPR 11 in order to cover the set of EMC requirements for the PCE applying to the solar photovoltaic power energy systems. EMC requirements for PCE were added in CISPR 11 Ed.6.0 which was published in Some product committees, which consider products utilizing PCE, have their own product standards on EMC requirements. SC 22G has developed IEC to define the limits and test methods for power drive systems. SC 22H has IEC for uninterrupted power supplies, and TC 26 has IEC for arc welding. TC 9 sets the emission limits with IEC (all parts). Moreover, TC 69 will have IEC covering EMC requirements for conducted charging stations for electric vehicles. Purpose of the development of a product EMC standard IEC Guide 107 specifies that TC 77 and CISPR have responsibility for developing the basic and generic standards for EMC requirements of products. Therefore, product committees are not free to set their own emission limits. If product committees intend to require immunity to particular disturbances, they shall refer to these basic EMC immunity standards. However, when the EMC standards which are developed by TC 77 and CISPR are not considered suitable for a particular product or electromagnetic environment, product committees shall seek their assistance and advice for any change in the emission limits and/or measurement requirements. Product committees are responsible for selecting the appropriate immunity test items and levels for their products as well as for defining the relevant performance criteria for the evaluation of the immunity test results. Consequently, product committees, such as TC 22, TC 26, TC 9, and TC 69, have their own EMC standard to define EMC limits and test methods for their products. On the other hand, TC 82 does not have its own product EMC standards. Therefore, TC 82 has to refer to the generic standards. Nevertheless, TC 82 has the responsibility to consider EMC requirements for PCE applying to the solar photovoltaic power energy systems, and TC 82 can take action as follows to develop its own product EMC standards: a) select the immunity test items in accordance with EMC environments for the solar photovoltaic power energy systems; b) supplement generic standards with a detailed description of test conditions and test set up; c) propose the conditional limits and alternative test methods in terms of installation environmental and operational conditions; d) develop appropriate requirements and test method for high power equipment. This document presents the minimum EMC requirements for PCE applying to solar photovoltaic power energy systems. 1 Under preparation. Stage at the time of publication: IEC AFDIS :2017.

10 8 IEC 62920:2017 IEC 2017 PHOTOVOLTAIC POWER GENERATING SYSTEMS EMC REQUIREMENTS AND TEST METHODS FOR POWER CONVERSION EQUIPMENT 1 Scope This document specifies electromagnetic compatibility (EMC) requirements for DC to AC power conversion equipment (PCE) for use in photovoltaic (PV) power systems. The PCE covered by this document can be grid-interactive, which is termed as a grid connected power converter (GCPC), or stand-alone. It can be supplied by single or multiple photovoltaic modules grouped in various array configurations, and can be intended for use in conjunction with batteries or other forms of energy storage. NOTE A micro inverter is an example of a GCPC supplied by a single photovoltaic module. This document covers not only PCE connected to a public low voltage AC mains network or other low voltage AC mains installation, but also PCE connected to a medium or high voltage AC network with or without step-down power transformers. Requirements for the PCE connected to a medium or high voltage AC network are specified in this document. However, some requirements relevant to grid interconnection are addressed with other standards specifying power quality or their own grid codes in some countries. NOTE DC/DC converters used for PV systems are not yet covered in this document. They can cause electromagnetic interference due to conducted disturbances at DC ports. PCE is assessed with EMC requirements as a type test at a test site. This document provides test methods and test conditions for PCE as well as emission and immunity requirements, but not for photovoltaic modules and other balance of system components. When compliance with EMC requirements at the test site cannot be shown due to technical reasons of the test site, PCE can be assessed in situ, such as at the manufacturer s premises or in the field where the PCE is assembled into a PV power system. However, only high frequency emission requirements for in situ assessment are specified in CISPR Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC :2014, Electromagnetic compatibility (EMC) Part 3-2: Limits Limits for harmonic current emissions (equipment with input current 16 A per phase) IEC :2013, Electromagnetic compatibility (EMC) Part 3-3: Limits Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connection IEC TR :2008, Electromagnetic compatibility (EMC) Part 3-6: Limits Assessment of emission limits for the connection of distorting installations to MV, HV and EHV power systems

11 IEC 62920:2017 IEC IEC :2000, Electromagnetic compatibility (EMC) Part 3-11: Limits Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems Equipment with rated current 75 A and subject to conditional connection IEC :2011, Electromagnetic compatibility (EMC) Part 3-12: Limits Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and 75 A per phase IEC TR :2011, Electromagnetic compatibility (EMC) Part 3-14: Assessment of emission limits for harmonics, interharmonics, voltage fluctuations and unbalance for the connection of disturbing installations to LV power systems IEC :2008, Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques Electrostatic discharge immunity test IEC :2006, Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques Radiated, radio-frequency, electromagnetic field immunity test IEC :2006/AMD1:2007 IEC :2006/AMD2:2010 IEC :2012, Electromagnetic compatibility (EMC) Part 4-4: Testing and measurement techniques Electrical fast transient/burst immunity test IEC :2014, Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques Surge immunity test IEC :2013, Electromagnetic compatibility (EMC) Part 4-6: Testing and measurement techniques Immunity to conducted disturbances, induced by radio-frequency fields IEC :2002, Electromagnetic compatibility (EMC) Part 4-7: Testing and measurement techniques General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto IEC :2002/AMD1:2008 IEC :2004, Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques Voltage dips, short interruptions and voltage variations immunity tests IEC :2005, Electromagnetic compatibility (EMC) Part 4-34: Testing and measurement techniques Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase CISPR 11:2015, Industrial, scientific and medical equipment Radio-frequency disturbance characteristics Limits and methods of measurement CISPR 11:2015/AMD1:2016 CISPR :2014, Specification for radio disturbance and immunity measuring apparatus and methods Part 1-2: Radio disturbance and immunity measuring apparatus Coupling devices for conducted disturbance measurements CISPR 32:2015, Electromagnetic compatibility of multimedia equipment Emission requirements 3 Terms and definitions For the purposes of this document, the following terms and definitions apply.