Bosch Security Systems Product Training login user: password: %dot#au72j)

Transcription

1 Front page Bosch Security Systems Product Training login user: password: %dot#au72j) July - December 2017

2 National training program delivered by Bosch & our distributors Invest in your present, and your future Training your staff to the highest possible level is an enormous investment in the present as well as the future. In the long term it saves you money and brings in profit. With greater customer satisfaction, reduced call back rates and increased referrals, a highly-skilled workforce is your biggest asset. "Training staff is one of the best investments businesses can make." Bosch specific courses Training is an essential part of our total approach to customer support and satisfaction. Bosch Security offers classroom technical training sessions for direct trade account customers. Distributors also offer Bosch technical product training courses to their trade customers. Training is offered on an as-required basis, at either our training facility at Baulkham Hills, NSW, or at our selected interstate third party training locations. Training courses may also be held at our distributor offices around the country, or at a customers premises where the number of attendees is large enough. So you can always rely on high quality and professional guidance when you chose to install Bosch Security products. Training Calendar Solution 2000/3000 Solution 6000 G Series BVMS Sydney Bosch IP Video Basics & Intelligent Video Analytics 29 August August August August August September September October November November October October November November 2017 Melbourne 18 July July July October October October 2017 Brisbane 19 September September September November November November 2017 Perth 15 August August August 2017

3 Bosch Solution 2000/3000 Intrusion Alarm Panel This training course is the Bosch endorsed training program for the Solution 2000 & 3000 Intrusion Alarm panels. The course covers the features, functionality and programming of the alarm panels. The primary outcome of the course is to enable a technician to install and maintain a Bosch Solution 2000/3000 alarm panel. This course covers the features, functionality, and programming of the Bosch Solution 2000 & 3000 intrusion panels. At the conclusion of this course, participants will be able to install and program the Solution 2000 & 3000 panels along with their most common accessories. There is no formal assessment for this course. Participants will be required to program a Solution 3000 panel in a variety of commands. The course is a four-hour course offered in the following timeslot: Day - 8:00 am - 12:00 pm On successful completion of course the participants will be awarded a Statement of Attendance for Bosch Solution 2000/3000 Intrusion Panel Training. Cost $125 including GST The course is for participants who have a knowledge of basic intruder detector system installation. The course does not include basic intrusion detection system principles. Security licences may apply to technicians installing, maintaining, or repairing security equipment. This is regulated & Enforcement Directorate (SLED),

4 Bosch Solution 6000 Intrusion Alarm Panel This training course is the Bosch endorsed training program for the Solution 6000 Intrusion Alarm panel. The course covers the features, functionality and programming of the alarm panels. The primary outcome of the course is to enable a technician to install and maintain a Bosch Solution 6000 alarm panel and its most common accessories. Key Components of the course are: ff Programming via the LCD Keypad ff Programming via the Solution Link Software ff Access Control Integration The primary outcome of the course is to enable a technician to install and maintain a Bosch Solution 6000 alarm panel. This course covers the features, functionality and programming of the Bosch Solution 6000 alarm panels. This course DOES NOT cover basic intruder detection installation and participants must possess a knowledge of security system installations before they attend. There is no formal assessment for this course. Participants will be required to program a Solution 6000 panel in a variety of commands. The course is a full day eight hour course: Day - 8:00 am - 4:00 pm This is a vendor endorsed course only and is not aligned to a nationally recognised unit of competency. On successful completion of this course the participants will be awarded a Statement of Attendance for Bosch Solution 6000 Intrusion Alarm Training. Cost $250 including GST This course is for particpants who have a knowledge of basic intruder detection system installation. Participants will be required to attend training with a Windows Laptop in order to install and be trained on the SolutionLink software. Participants will also require SolutionLink and a CM910 Direct Link Programmer. These can be purchased at the time the training is booked and be provided on the day. Security licences may apply to technicians to installing, maintaining or repairing security equipment. This is regulated & Enforcement Directorate (SLED),

5 Bosch G Series Integrated Access Panel This training course is the Bosch endorsed training program for the G Series Intrusion Alarm panel. The course covers the features, functionality and programming of the alarm panels. The primary outcome is to be able to install and program the G Series panel along with its most common accessories. This course covers the features, functionality, and programming of the Bosch G Series integrated access panel. At the conclusion of this course, participants will be able to install and program the G Series panel along with its most common accessories. Participants will also learn programming of the panel via the Remote Programming Software (RPS) as well as access control integration. There is no formal assessment for this course. Participants will be required to program a G Series panel in a variety of commands. Cost $250 including GST The course is for participants who have a knowledge of basic intruder detector system installation. The course does not include basic intrusion detection system principles. Security licences may apply to technicians installing, maintaining, or repairing security equipment. This is regulated The course is a full day eight-hour course: Day 8:00 am 4:00 pm On successful completion of this course the participants will be awarded a Statement of Attendance for Bosch G Series Integrated Access Panel Training. & Enforcement Directorate (SLED),

6 Bosch Video Management System (BVMS) This training course is the Bosch endorsed training program for the Bosch Video Management System (BVMS). The course includes an introduction to BVMS, and an overview of features & specifications, key benefits, common applications, and best practices. This course provides the participants an introduction to the Bosch Video Management System, and develops in to designing and administering BVMS systems. The course includes an introduction to BVMS, and an overview of features & specifications, key benefits, common applications, and best practices. Cost $800 including GST Successful completion of the Bosch IP Basics for Video Systems online course available via the Bosch Security Academy website. Participants will be required to perform a number of operations on a training BVMS system. An online examination must be successfully completed at the end of the course. The course is a four-day course offered in the following timeslots: Day 1 8:00 am 4:00 pm Day 2 8:00 am 4:00 pm Day 3 8:00 am 4:00 pm Day 4 8:00 am 4:00 pm Security licences may apply to technicians installing, maintaining, or repairing security equipment. This is regulated & Enforcement Directorate (SLED), On successful completion of course and the online examination the participants will be awarded an Expert level certification in the Bosch Video Management System.

7 Bosch IP Video Basics & Intelligent Video Analytics This training course is the Bosch endorsed training program for Bosch IP Video Basics & Intelligent Video Analytics. The course includes an introduction to the camera technology including unique selling features, best practices, device selection, device configuration, and case studies. This course provides the participants an introduction to Bosch IP Video Cameras and also provides an understanding of the Bosch Intelligent Video Analytics. The course includes an introduction to the camera technology including unique selling features, best practices, device selection, device configuration, and case studies. Cost $250 including GST The course is for participants who have a knowledge of basic IP video system installation. The course does not include basic IP video system principles. There is no formal assessment for this course. Participants will be required to setup a number of features on Bosch IP video cameras including configuration and testing of video analytics. The course is a full day eight-hour course: Day 8:00 am 4:00 pm On successful completion of course the participants will be awarded a Statement of Attendance for Bosch IP Video Basics & IVA Training. Security licences may apply to technicians installing, maintaining, or repairing security equipment. This is regulated & Enforcement Directorate (SLED),

8 Training Locations NSW - Sydney - Baulkham Hills Bosch Security Systems Suite 1, Level 2-21 Solent Circuit, Baulkham Hills NSW 2153 Tel: QLD - Brisbane - Herston IPL Institute for Learning Professionals 17 Gould Rd Herston QLD 4006 Tel: (07) VIC - Melbourne - Eumemmerring Atura Hotel Dandenong 5-17 Doveton Avenue, Eumemmerring VIC 3177 Tel: (03) WA - Perth - Welshpool Scorpion Training Solutions Level 1, 310 Treasure Road (NORTH), Welshpool WA 6106 Tel: (08) Bosch Security Systems To learn more about our product offering, please visit Call or us with your training enquiry: Ph: stsales@au.bosch.com All rights reserved Printed in Australia 07/17