The importance of signs and colors in industry and in areas with risk of explosion

Size: px

Start display at page:

Download "The importance of signs and colors in industry and in areas with risk of explosion"

Matilda Stevens
6 years ago
Views:

March 2016 The importance of signs and colors in industry and in areas with risk of explosion Cortem Group, always careful about the evolution of new technologies, has designed the EVL-60B and

CODE COLOR POSSIBLE USES EVL-60B WHITE WHITE VERSION FOR STANDARD LIGHTING EVL-60B/R RED RED LIGHT / INDICATION OFDANGEROUS AREAS EVL-60B/V GREEN GREEN LIGHT / IDENTIFICATION OF CHEMICALS EVL-60B/G

1 March 2016 The importance of signs and colors in industry and in areas with risk of explosion Cortem Group, always careful about the evolution of new technologies, has designed the EVL-60B and EVL-70B series floodlights with focused optics (typical angle 40 ) and different colors suitable for different lighting needs, as shown in Table 1. CODE COLOR POSSIBLE USES EVL-60B WHITE WHITE VERSION FOR STANDARD LIGHTING EVL-60B/R RED RED LIGHT / INDICATION OFDANGEROUS AREAS EVL-60B/V GREEN GREEN LIGHT / IDENTIFICATION OF CHEMICALS EVL-60B/G AMBER (YELLOW) YELLOW LIGHT / REMOVAL OF WILD ANIMALS AND INSECTS EVL-60B/BL BLUE BLUE LIGHT FOR SPECIFIC APPLICATIONS Table 1- Available colors with EVL-60B and EVL-70B series lighting equipment EVL-60B; 60B/R; 60B/V; 60B/G; 60B/BL Typical 120/240/277 VAC, 33W EVL-70B; 70B/R; 70B/V; 70B/G; 70B/BL Typical 120/240/277 VAC, 42W These colors may be used in plants with explosion hazard in order to give to operators a further element to recognize hazardous situations and to alert the security personnel in charge for the evacuation or for making safe a plant s part affected by the unusual event.

2 For example, these floodlights can be used to advise, through their lighting, a specific event and a no-go area. Nature, through colors, allows us to establish a communication relationship with the surrounding environment and, through our senses, the colors put us into contact with reality allowing us at the same time to convey messages that can express, depending on the circumstances, feelings, concepts and signals, sometimes up to create a real language. The mental association code = color, promotes learning and memory and, for this reason, identifying colors are used in all commercial and industrial sectors, in order to recognize the components, both of process flux and electrical and electronic conditions, and for all matters concerning the safety of the operators responsible for the production and maintenance activities. The coded use of color expresses defined characteristics (partly complying with the standards) and it s assigned to it a specific meaning related to safety or to the identification of certain components and/or actions to be taken for keeping in operation the plant or for the occurrence of critical situations during an incorrect plant operation. The aim of this dissertation is to highlight the several types of colors used in the engineering practice of a plant, with particular reference to the safety of electrical installations and machines. Typical subdivision: - The color of cables, as defined in the table UNEL IEC "Colors of the sheaths of the electric cables", which deals with the color coding of the outer sheaths of the cables with the purpose to simplify the operations of cable identification for different applications or belonging to electrical systems of different category. - The color of control devices (buttons), as defined in EN standard "Fundamentals and Safety for man-machine interface, marking and identification - Coding principles for indicators and actuators" and in EN standard Safety of machinery - electrical equipment of machines", the color is applied as reported in Table2.

3 Color Function Description Typical uses Emergency Determines the need for action in case of danger or emergency conditions Emergency stop of the operative machine Safety Determines a state of normal condition The start control of a operative machine Anomaly Determines a malfunction condition or abnormality function Requires action by the operator to verify the manifested cause Blue Mandatory Determines the need of intervention or the obligation of a specific action Requires action by the operator for the reset White Starter or insertion function Grey Ordinary Determines the need of action to start the specific functions Impulsive control function (start-stop) Black Permanent control function Table 2 - Color of control devices (buttons) - The color of signal lights (signal lamps), always as defined by EN standard, the color is applied as reported in Table 3. Color Function Typical uses Blue Emergency safety Anomaly Mandatory Signal of stop of the operating machine in front of a major failure and which need operator intervention Correct operation signalling or drive alert ready to be actuated Report an anomaly and requires intervention by the operator for verification of the cause manifested Report a request of intervention by the operator for the reset

White Ordinary Color without any specific meaning which, sometimes, as a function of specific requirements, is given in the absence of possible allocation of the aforesaid other colors Table 3 Color

4 White Ordinary Color without any specific meaning which, sometimes, as a function of specific requirements, is given in the absence of possible allocation of the aforesaid other colors Table 3 Color of the signal lights - The color of light towers, always as defined in EN standard "Fundamentals and Safety for man-machine interface, marking and identification - Coding principles for indicators and actuators" and in EN standard "Safety of machinery - electrical equipment of machines", the color is applied as reported in Table 4. Table 4 - Color of light towers Condition of normal operation Condition of danger White Powered machine Blue Condition of abnormality function Need of action by the operator The legislative references are the Legislative Decree 493/96 and the Directive 2014/27/ EU of the European Parliament and of the Council dated February, 26th 2014 amending the Directive 92/58/EEC, concerning the minimum requirements for security signals and safety in the workplace. That decree lays down the obligations for the employer, such as: - Make use of safety signs for: prevent dangerous behavior, dangers warning, prescribe safe behavior, provide information about emergency exits and rescue systems and other information relating to safety. - Information and training for workers and safety representatives.

5 - Apply the rules of good practice, for the cases not mentioned in that decree. As reported in UNI standard and in the Legislative Decree 493/96, which calls for colors and safety signs to be used in order to prevent emergency situations in the workplace, the main definitions to be taken into account are the following: - Safety signs - Signs that, referring to a particular object or a particular situation or activity, transmits the information related to safety through a safety signal or color. The general meaning of color assigned to safety must be as specified in Table 5. Table 5 Meaning of colors Color Function Typical uses Light blue Stop Prohibition Location of fire equipment Security situations Rescue equipment Emergency room Caution Hazard warning Obligation or prescription Information (1) Stop signal Emergency stop device Prohibition sign Fire extinguisher location Passing signals and emergency exits Emergency showers The first aid and rescue Warning signs (risk of fire, explosion, radiation, toxicity, etc.). Mandatory signs to bring a personal protective equipment Technical safety instructions (1) With the exception of alerts (see UNI ). - Safety color - Color of defined characteristics, it s assigned to a specific safety meaning. - Contrast color - Color of defined characteristics, having the purpose of stand out another one.

6 - Staining (safety) - Safety color applied to a surface without any reference to geometric figures or graphic signs, in order to attract attention for safety purposes. - Safety signal - Signal that expresses a safety message, obtained with the combination of a geometric shape, colors and a graphic sign, symbol or pictogram, provides specific information. It can be equipped with an additional signal. - Prohibition sign - Signal in which is used a graphic sign, symbol or pictogram which forbid behavior likely to incur or cause danger. - Warning or danger - Signal in which is used a graphic sign, symbol or pictogram warning of a hazard or danger. - - Signal of obligation or prescription - Signal in which is used a graphic sign, symbol or pictogram prescribing specific behavior. - Rescue or distress signal - Signal in which a graphic sign, symbol or pictogram is used to give information about emergency exits or the means of emergency or rescue. - Location signal of fire equipment - Signal in which a graphic sign, symbol or pictogram is used to give information about the location of fire equipment. - Information signal - Signal providing different information such as prohibition, warning, obligation and rescue. - Additional signal - Signal that is used only in combination with one of safety signs types listed above which provides supplementary information. - Outline (or contrast edge) The area surronding the signal having the function of highlighting it against the background. The outline, if present, must not have size smaller than 1 mm and it must be of white color for all signals and white or yellow for warning or danger signals. - Graphic sign, symbol or pictogram - Image that is used in one of the safety signals to transmit information about safety, not using text. At the same time should be considered the standard ISO 3864 "Colors and safety signals" and IEC standard Basic principles for graphical symbols for use on equipment - Part 1: Creation of graphical symbols for registration. The workers, to not compromise the achievement of the stated purposes, must observe to certain rules such as to not modify or remove, without authorization, the safety warning or control devices (Art. 5 of Legislative Decree 626/96).

7 In plant engineering system, there are no regulations that, in this moment, may apply the use of new LED lighting technologies which, by their nature, are able to provide different colors respect to the color of the traditional filament, fluorescent and discharge lamps. Therefore, LED lighting fixtures would give an important further technical/informative support for critical situations that usually can occur during the processes in industrial plants both in safe zones and in those at risk of explosion. We conclude this brief discussion, hoping that our contribution could be an incentive for designers, in order to adopt all measures that can further enhance the concept of "SECURITY" in the management and maintenance of plants in general and, particularly, in those at risk of explosion and/or fire.

ISO INTERNATIONAL STANDARD. Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labels

ISO INTERNATIONAL STANDARD. Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labels INTERNATIONAL STANDARD ISO 3864-2 First edition 2004-10-15 Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labels Symboles graphiques Couleurs de sécurité