Declaration of conformity maintenance record. No Revised date Contents Reasons Approval
|
|
- Lesley Patterson
- 6 years ago
- Views:
Transcription
1
2 1st March 2005 Issue 1 Declaration of conformity maintenance record No Revised date Contents Reasons Approval Security Systems Division Matsushita Electric Industrial Co., Ltd. Yokohama Kanagawa 223 Japan
3 1st March 2005 Issue 1 T05-PSSD-A228-1 Part Technical Construction Document of Colour CCTV Camera Panasonic WV-CP480/G WV-CP484E WV-CP480/CH Prepared / Issued on 1st March 2005 The products comply with the essential safety and health requirement of EC council Directive 73/23/EEC as amended by 93/68/EEC, and 89/336/EEC as amended by 93/68/EEC Approved and Signed by: Signature : Printed : M. Tanaka Title : Group Manager Engineering Admini Group Security Systems Division Matsushita Electric Industrial Co., Ltd. Yokohama Kanagawa 223 Japan
4 1st March 2005 Issue 1 Technical Construction Document maintenance record No Revised date Contents Reasons Approval Security Systems Division Matsushita Electric Industrial Co., Ltd. Yokohama Kanagawa 223 Japan
5 1st March 2005 Issue 1 Technical Construction Document Part Product identification & Description 1. Name of Product : Colour CCTV Camera, Commercial 2. Trade name : Panasonic 3. Model number 1. Basic model : WV-CP480/G 2. Similar model : WV-CP484E : WV-CP480/CH : Description of Differences Similar model Differ from Basic model WV-CP484E AC24V used instead of AC mains as power source. WV-CP480/CH Power supply cord plug is differ for China market. 4. Product Certification : EMC TUV Rheinland Japan Certificate number : Panasonic Mobile Communication Engineering (TUV subcontractor) Reference number : MYS Safety (AC Adaptor) Products safety design is checked by TUV in German. Reference number : Rating (Basic model) 1. Power : main operated 2. Voltage : V 3. Frequency : 50Hz 4. Consumption : 4.6 W
6 6. General Appearance and name plate: CE Mark is printed in the name plate. Basic model Panasonic Panasonic Colour CCTV Camera Colour CCTV Camera Model No. WV-CP480/G Model No. WV-CP484E POWER V 50Hz 4.6W POWER 24V 50Hz 4.7W Matsushita Electric Industrial Co., Ltd. 12V==420mA Matsushita Electric Industrial Co., Ltd. Made in Japan Made in Japan Panasonic Colour CCTV Camera Model No. WV-CP480/CH POWER V 50Hz 4.6W??? Dimensions (without lens) WV-CP480/G 70 (W) x 65 (H) x 129 mm (D) WV-CP480/CH 70 (W) x 65 (H) x 129 mm (D) WV-CP484E 67 (W) x 65 (H) x 100 mm (D) Weight: WV-CP480/G 520 g (Without power cord) WV-CP480/CH 520 g (Without power cord) WV-CP484E 400 g 7. Places of manufacturer Places of manufacturer Matsushita Electric Industrial Co., Ltd. Global Factory Center 600 Saedo Tsuzuki-ku, Yokohama Japan ISO9001 registered firm. Places of manufacturer Panasonic System Solutions Suzhou Co., Ltd. 1428, Binhe Road, New District Suzhou, Jiangsu, China ISO9002 registered firm. Models produced WV-CP480/G, WV-CP484E Models produced WV-CP480/CH 8. Safety Precautions 1. These products designed for commercial and similar use. 2. Instructions for safe use details: refer to the attached sheet, which are integral parts of operating and installation manuals accompanied with each products. 3. CAUTION-to reduce the risk of electric shock, do not remove cover, no user-serviceable parts inside. Refer servicing to qualified service personnel. 4. WARNING-to prevent fire or shock hazard, do not expose this appliance to rain or moisture. 5. WARNING-this apparatus must be earthed. 6. IMPORTANT-the wire in this mains lead are coloured in accordance with the following code. Green-and yellow : Earth Blue : Neutral Brown : Live
7 1st March 2005 Issue 1 Technical Construction document Part Conformity assessment Product: Colour CCTV Camera Trade Name: Panasonic Model No. Part -1 : WV-CP480/G Part -2 : WV-CP484E Part -3 : WV-CP480/G T05-PSSD-A T05-PSSD-A T05-PSSD-A
8 1st March 2005 Issue 1 Technical Construction document Part -1 Conformity assessment Product: Colour CCTV Camera Model: WV-CP480/G Trade name : Panasonic 2. Part 1-a (1) Comply to the safety requirements in the EC Directive. Comply to 73/23/EEC as amended by the article 13 of 93/68/EEC (2) Attach the design information and harmonized standards for complying to the essential requirements. 3. Part 1-b (1)Comply to the protection requirements in the EC Directive. Comply to 89/336/EEC as amended by 92/31/EEC and 93/68/EEC (2)Attach the design information and harmonized standards for complying to the essential requirements.
9 1st March 2005 Issue 1 Technical Construction document Part 1-a Design fundamentals for complying to the essential safety and health requirements prescribed in the EC council Directive 73/23/EEC as amended by the Article 13 of 93/68/EEC and each Member States' legislation's transposing those Directives Principle element of the Safety objectives Harmonized standards applied Product Designing Features and Conformity Assessment Results Annex Item 1.a)-d) 73/23/EEC Annex Item 2. a)-d) 73/23/EEC EN60065 :2002 Insulation class : Class 1 Safety Critical Components : Use N/B Recognized Components Certificate /Test Report No : SEMKO Certificate No.: CB Test Report No.: Annex Item 3. a)-c) 73/23/EEC
10
11
12
13 1st March 2005 Issue 1 Technical Construction document Part b Design fundamentals for complying to Protection requirements prescribed in the EC Directive 89/336/EEC as amended by 92/31/EEC, 93/68/EEC and each Member States' legislation's transposing those Directives. Protection requirements Article 4, (a) 89/336/EEC Harmonized standards applied EN55022:1998 +A1:2000 +A2:2003 EN :2000 EN :1995 +A1:2001 Product Designing features and Conformity Assessment Results Designed to meet protection requirement Tested at Matsushita Yokohama Site subcontracted site of TUV Rheinland (C/B) Test Report No.: MYS Article 4, (b) 89/336/EEC EN55024:1998 +A1:2001 +A2:2003 Designed to meet protection requirement Tested at Matsushita Yokohama Site subcontracted site of TUV Rheinland (C/B) Test Report No.: MYS
14 Exhibit #1 Report of Measurement Ref. No. MYS Matsushita Yokohama Site PMCE Panasonic Mobile Communication Engineering Co., Ltd. EMC Department
15 Index 1. Summary 1 2. EUT Configuration & operating Conditions Radiated Emission ( MHz)at Anechoic Chamber 4 Frequency vs. Emission Level 5 Photograph Conducted Emission ( MHz) 8 Frequency vs. Emission Level 9 Photograph Harmonic Current Emission 11 Table 1 Harmonics Currents 12 Table 2 Voltage Source Qualification 13 Photograph Voltage Fluctuation Photograph Electrical Discharge Test Photograph Radiated Electromagnetic Field Test 22 Photograph Electrical Fast Transient / Burst Test Photograph Surge Immunity Test 29 Photograph Radio Frequency Conducted Immunity Test 31 Photograph Voltage Dip/Short Interruptions Immunity Test 33 Photograph Measuring Instruments List
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54 1st March 2005 Issue 1 Technical Construction document Part -2 Conformity assessment Product: Colour CCTV Camera Model: WV-CP484E Trade name : Panasonic 1. Evaluation of compliance between basic model and similar model. Basic model : WV-CP480/G Similar model : WV-CP484E (1)Reason for the evaluation of similar model are as follows. Reason : Similar model is identical to basic model except for power supply (AC 24V) (2)Details of Differences points between basic model and similar model. Item Basic model Similar model In terms of schematic diagram In terms of wiring In terms of construction Ditto except for power supply circuit Ditto Ditto In terms of components Power cord for V : Power cord for 24V :
55 Certification of compliance for mass production / EMC 1. Explanation of difference between "Basic model" and "Similar models" concerning EMC. *If the compliance of similar model is judged by Competent Body or by yourself insert "C" or "S" in this column respectively. Basic Model Similar Model Difference * WV-CP480/G WV-CP484E Power Supply (AC 24V) S 2. Sampling procedure for mass production Specify the period of sampling test for confirming compliance with EMC standards (days or moth etc) from the first production) and testing method (full test or simplified test). If no test is specified, explanation the reason why the model is deemed to comply with the relevant EMC standard without testing. First Sampling Second Sampling Testing Method and followings Basic Pre-Production Mass-Production products Simplified Model Products which was not enough Test and the margin. Mass-Production confirming within one year Products from mass production. Similar Mass-Production Same as above Same as above Model Products The reason of no test, if applicable:
56 1st March 2005 Issue 1 Technical Construction document Part -3 Conformity assessment Product: Colour CCTV Camera Model: WV-CP480/CH Trade name : Panasonic 1. Evaluation of compliance between basic model and similar model. Basic model : WV-CP480/G Similar model : WV-CP480/CH (1)Reason for the evaluation of similar model are as follows. Reason : Similar model is identical to basic model except for power supply cord plug (for China ) (2)Details of Differences points between basic model and similar model. Item Basic model Similar model In terms of schematic diagram In terms of wiring In terms of construction Ditto except for power supply cord plug Ditto Ditto In terms of components Power cord plug for Europe Power cord plug for China
57 Certification of compliance for mass production / EMC 1. Explanation of difference between "Basic model" and "Similar models" concerning EMC. *If the compliance of similar model is judged by Competent Body or by yourself insert "C" or "S" in this column respectively. Basic Model Similar Model Difference * WV-CP480/G WV-CP480/CH Power Supply cord plug (for China) S 2. Sampling procedure for mass production Specify the period of sampling test for confirming compliance with EMC standards (days or moth etc) from the first production) and testing method (full test or simplified test). If no test is specified, explanation the reason why the model is deemed to comply with the relevant EMC standard without testing. First Sampling Second Sampling Testing Method and followings Basic Pre-Production Mass-Production products Simplified Model Products which was not enough Test and the margin. Mass-Production confirming within one year Products from mass production. Similar Mass-Production Same as above Same as above Model Products The reason of no test, if applicable:
58 Exhibit #3 Photograph-Appearance Exhibit #4 Safety Precautions Copy of a part of operation and installation manual.
AUGUST 2016 CONTENTS:
EMC SERVICES NEWSLETTER AUGUST 2016 CONTENTS: RECENT STANDARD CHANGES NEW FCC REGULATIONS IEC 60601-1-2 4TH EDITION LOW VOLTAGE DIRECTIVE EU DIRECTIVES EMC DIRECTIVE 2014/30/EU KOREA UPDATE: KN32/35 1.
More informationThe New EMC Directive 2004/108/EC
The New EMC Directive 2004/108/EC In the process of this review I have tried to spell out in words what is often referred to as a section number while also keeping to location information as used in the
More informationThe New EMC Directive 2004/108/EC
The New EMC Directive 2004/108/EC In the process of the review I have tried to spell out in words what is often referred to as a section number. This helps reduce the need to flip pages as one reads this.
More informationCE Marking and Technical Standardisation
EDITION 3.0 CE Marking and A G A M B I C A T E C H N I C A L G U I D E Technical Standardisation Guidelines for application to Electrical Power Drive Systems CE Marking and Technical Standardisation Guidelines
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SONY GLOBAL MANUFACTURING & OPERATIONS CORPORATION EMC/RF TEST LABORATORY - MAIN LAB 8-4 Shiomi Kisarazu-shi Chiba-ken, 292-0834, Japan Mr. Koichi.Hiyaoka Phone:
More informationMAJIK ENGLISH 11/20/02 11:30 AM Page 1 M A J I K O W N E R S M A N U A L
MAJIK OWNERS MANUAL i MAINS PLUGS This appliance is supplied with a non-rewireable mains plug for the intended country. Replacement mains leads can be obtained from your Linn retailer. Should you need
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHANGHAI INSPECTION AND TESTING INSTITUTE OF INSTRUMENTS AND AUTOMATION SYSTEMS CO., LTD. 103 Cao Bao Road Shanghai, 200233 People s Republic of China Mr. Xu
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CENTRE TESTING INTERNATIONAL GROUP CO., LTD. 1 Building C, Hongwei Industrial Park Block 70, Bao'an District Shenzhen, Guangdong, People s Republic of China
More informationCE EMC Test Report EN :2015 EN :2017. Folder with powerbank ZKS E. Lieber Ouyang (Engineer) Lahm Peng (Manager)
CE EMC Test Report Test Standard(s): Applicant: Product Name: EN 55032 :2015 EN 55035 :2017 Goya Importacionesy Distribuciones SL B50154293 Folder with powerbank Model: 606090 Report No.: ZKS180800212E
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 MRT TECHNOLOGY (SUZHOU) CO., LTD. D8 Building, Youxin Industrial Park No. 2 Tina'edang Rd. Wuzhong Economic Development Zone Suzhou, Jiangsu, People s Republic
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60533 Second edition 1999-11 Electrical and electronic installations in ships Electromagnetic compatibility Installations électriques et électroniques à bord des navires Compatibilité
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COMPLIANCE CERTIFICATION SERVICES, INC. 1 Xindian Laboratory No.163-1, Jhongsheng Road Xindian District, New Taipei City 23151, Taiwan, R.O.C. Contact: Kurt
More informationOn Electromagnetic Compatibility
TECHNICAL REGULATION On Electromagnetic Compatibility Approved by Resolution of Cabinet of Ministers of Ukraine No. 785 dd. 2009.07.29 ELMAS LTD Index Index...2 General Provisions...3 Essential Requirements...5
More informationCE Compliance. Silva Management. September 18th, 2014 David Norris. C Eng. FI Mech E.
David Norris C Eng. FI Mech E. Recent employment positions. Consultant to Machine Tool companies. Technical Director, Bridgeport Machines Ltd. Engineering V.P., Bridgeport Machines Inc. We will consider
More informationThis is a preview - click here to buy the full publication
TECHNICAL REPORT IEC TR 61000-4-1 Edition 1.0 2016-04 BASIC EMC PUBLICATION Electromagnetic compatibility (EMC) Part 4-1: Testing and measurement techniques Overview of the IEC 61000-4 series INTERNATIONAL
More informationHow to Self-Certify For the CE Mark A Quick Start Guide by Dennis King - EMI Test Lab
How to Self-Certify For the CE Mark A Quick Start Guide by Dennis King - EMI Test Lab For questions and details contact Dennis at dennis@emitestlab.com Introduction The CE mark (an acronym for the French
More informationApplication for FCC Certificate On Behalf of. TTE Technology, Inc. LCD TV or LED TV. Model Number: 32R20 FCC ID:W8U32R20
Application for FCC Certificate On Behalf of TTE Technology, Inc. LCD TV or LED TV Model Number: 32R20 FCC ID:W8U32R20 Prepared for : TTE Technology, Inc. Address : 2455 Anselmo Drive Suite 101 Corona
More informationRULEBOOK ON ELECTROMAGNETIC COMPATIBILITY
RULEBOOK ON ELECTROMAGNETIC COMPATIBILITY ("Official Gazette of RS, issue No. 13/2010) I INTRODUCTION Scope Article 1 This Rulebook stipulates the essential requirements that shall be met with regard to
More informationSTS Directory Accreditation number: STS 0009
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 Mettler-Toledo GmbH ENL Testing Laboratory Heuwinkelstrasse 3 8606 Naenikon SWITZERLAND Head: Bernhard Merk Responsible
More informationCE marking & your legal obligations
CE marking & your legal obligations This presentation is intended to provide a practical approach guide to what you need to know about the CE marking requirements for electrical and electronic equipment
More informationDLC Instruction Manual. Light Curing Machine MODEL. Table of Contents
Light Curing Machine Table of Contents Precautions for Electrical >>>>>>>>>>> 1 Equipment in Use Precautions >>>>>>>>>>>>>>>>>>>> 2 Recommended Procedure when >>>>> 4 Opening Product Packaging Part Names
More informationElectromagnetic Compatibility of Alarm Systems
Electromagnetic Compatibility of Alarm Systems Jan VALOUCH Tomas Bata University in Zlin, Faculty of Applied Informatics, Nad Stráněmi 4511, 76005, Zlín, Czech Republic valouch@fai.utb.cz. Abstract. Alarm
More informationApplication for FCC Certificate On Behalf of. TTE Technology, Inc. LCD TV or LED TV. Model Number: 55R80 FCC ID:W8U55R80
Application for FCC Certificate On Behalf of TTE Technology, Inc. LCD TV or LED TV Model Number: 55R80 FCC ID:W8U55R80 Prepared for : TTE Technology, Inc. Address : 2455 Anselmo Drive Suite 101 Corona
More informationEN50438 TEST REPORT SUMMARY. Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks
TEST REORT SUMMARY EN 50438 Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks Report reference number... : 12TH0525-EN50438_SUM_0 Date of issue......:
More informationCouncil Directive 93/68/EEC of 22 July 1993 amending Directives
Council Directive 93/68/EEC of 22 July 1993 amending Directives 87/404/EEC (simple pressure vessels), 88/378/EEC (safety of toys), 89/106/EEC (construction products), 89/336/EEC (electromagnetic compatibility),
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL TECHNICAL SYSTEMS (NTS) - LONGMONT 1736 Vista View Drive Longmont, CO 80504-5242 Mr. Eric Loucks Phone: 303 776 7249 ELECTRICAL Valid To: August 31,
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60601-1-2 2001 AMENDMENT 1 2004-09 Amendment 1 Medical electrical equipment Part 1-2: General requirements for safety Collateral standard: Electromagnetic compatibility Requirements
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES SHANGHAI Bl. No. 86, 1198 Qinzhou Road (North) Shanghai 200233, PEOPLE S REPUBLIC OF CHINA Leah Xu leah.xu@intertek.com Phone: +86
More informationThis is a preview - click here to buy the full publication
TECHNICAL REPORT IEC TR 60601-4-2 Edition 1.0 2016-05 colour inside Medical electrical equipment Part 4-2: Guidance and interpretation Electromagnetic immunity: performance of medical electrical equipment
More informationJBCE input for the RoHS FAQ document
JBCE input for the RoHS FAQ document JBCE welcomes the recast of the RoHS Directive 2011/65/EU (hereafter generally referred to as RoHS 2 ) 1 and appreciates the ongoing work by the Commission in realizing
More informationCE marking & your legal obligations
CE marking & your legal obligations This presentation is intended to provide a practical approach guide to what you need to know about the CE marking requirements for electrical and electronic equipment
More informationInstruction Manual M6627 / Version 7.4. Slide Drying Bench MH6616 MH6616X1
Instruction Manual M6627 / Version 7.4 Slide Drying Bench MH6616 MH6616X1 Please take your time to read this Instruction Manual in order to understand the safe and correct use of your new Electrothermal
More informationThermo-Sealer. Manual Heat Sealer. User Manual
Thermo-Sealer Manual Heat Sealer User Manual Thermo-Sealer Contents Page Page Introduction 2 Safety 2 Declaration of conformity 3 Caution and safety signs in accordance with IEC 417 4 Unpacking 4 Technical
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ARTESYN PRODUCT TESTING SERVICES 2900 South Diablo Way, Suite 190 Tempe, AZ 85282 Tom Tuttle Phone: 602 228 7869 Email: tom.tuttle@artesyn.com ELECTRICAL (EMC)
More informationThe European Radio Equipment Directive 2014/53/EU
TÜV SÜD Slide 1 The European Radio Equipment Directive 2014/53/EU 28 March 2017 Meet the speaker behind the voice Jon Lea Senior Engineer (Product Certification), TÜV SÜD 30 years experience in the testing
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COMPLIANCE ENGINEERING PTY LTD 90 Indian Drive Keysborough, Victoria 3173, AUSTRALIA Mr. Simon Grilj Phone: 61 3 9763 3079 Email: simon@compeng.com.au ELECTRICAL
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61000-4-3 Edition 2.1 2002-09 Edition 2:2002 consolidated with amendment 1:2002 BASIC EMC PUBLICATION Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques
More informationFCC COMPLIANCE REPORT. SHENZHEN STARWELL TECHNOLOGY CO., Ltd. AC/DC ADAPTER
FCC COMPLIANCE REPORT SHENZHEN STARWELL TECHNOLOGY CO., Ltd. for AC/DC ADAPTER Model Number : SMS-01XXXYYY-S06 XXX Stand for output voltage; YYY Stand for output current Prepared for : SHENZHEN STARWELL
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATOIRE D ESSAIS CEM INC. 1490-D Nobel Street Boucherville, Quebec, Canada J4B 5H3 Mr. Xavier Couste Phone: 450 868 0360 Email: Xavier.Couste@nts.com ELECTRICAL
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60044-7 First edition 1999-12 Instrument transformers Part 7: Electronic voltage transformers This English-language version is derived from the original bilingual publication
More informationValve Manufacturers Association of America
BUSINESS ASSURANCE Valve Manufacturers Association of America 2016 Technical Seminar: EU s New Legislation Framework (NLF) - What this means to you. Mike Norman 1 VMA Technical Session - March 2016 SAFER,
More informationAS/NZS IEC :2016
AS/NZS IEC 60601.2.2:2016 (IEC 60601-2-2, Ed.5.0 (2009) IEC 60601-2-2:2009/COR1:2014, IDT) Australian/New Zealand Standard Medical electrical equipment Part 2.2: Particular requirements for the basic safety
More informationThis second part of the lesson & is dedicated to EMC legal aspect and standards.
This second part of the lesson & is dedicated to EMC legal aspect and standards. We should begin by a first part on the last version of the European directive 2014/30/UE which concerns electronic products
More informationRules for Classification and Construction Additional Rules and Guidelines
VI Rules for Classification and Construction Additional Rules and Guidelines 7 Guidelines for the Performance of Type Approvals 7 Test Requirements for Statical Converters with Semi-Conductors Edition
More informationProduct Tests Report
TO WHOM IT MAY CONCERN Page: 1 of 5 Product name: Model number and description: MIC IP starlight 7000i Product Tests Report MIC-7502-Z30B, PTZ camera 2MP HDR 30x IP68 IK10, black MIC-7502-Z30W, PTZ camera
More informationConstruction Products Directive
Construction Products Directive Evaluation of conformity of Heat soaked thermally toughened soda lime silicate safety glass to he N 14179-2 ( September 2006) G E P V P, T H E E U R O P E A N A S S O C
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA INC. 1950 Evergreen Blvd., Suite 100 Duluth, GA 30096 Gary Flom Phone 678 775 2334 ELECTRICAL Valid To: March 31, 2020 Certificate
More information(1135/2016) Translation from Finnish Legally binding only in Finnish and Swedish Ministry of Economic Affairs and Employment, Finland
Translation from Finnish Legally binding only in Finnish and Swedish Ministry of Economic Affairs and Employment, Finland Electrical Safety Act (1135/2016) By decision of Parliament, the following is enacted:
More informationOperating Instructions
Bracken Hill South West Industrial Estate Peterlee Co Durham SR8 2SW ENGLAND Tel: +44(0)191 5863511 www.seaward.co.uk sales@seaward.co.uk service@seaward.co.uk Part Number 347A550 Revision 1 2006 Seaward
More informationReport No.: SQE Page 2 of 11 Issued: Test Report No. : EMC -- T E S T R E P O R T SQE Equipment under Test : 24Bit Barometer
TEST REPORT IEC 61000-4-2-2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test Report Reference No....: SQE13090002 R/C: 60520
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60533 Second edition 1999-11 Electrical and electronic installations in ships Electromagnetic compatibility Installations électriques et électroniques à bord des navires Compatibilité
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA, INC. 7250 Hudson Blvd., Suite 100 Oakdale, MN 55128 Jay Kogoma or Michelle Loeffler Phone 651 730 1188 ELECTRICAL Valid to: February
More informationImplementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -
TF N 530 Rev.2 2012-04-13 CONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA - 1 Drafting
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COMPLIANCE MANAGEMENT GROUP (CMG) 1 257 Simarano Drive, Suite 4 Marlborough, MA 01752 Authorized Representative: Mike Morrow Phone: 508 460 1400 ext. 222 Email:
More informationCE marking & your legal obligations
CE marking & your legal obligations This presentation is intended to provide a practical approach guide to what you need to know about the CE marking requirements for electrical and electronic equipment
More informationAchieve Success with European Medical Device Commercialization. By Russ King
Achieve Success with European Medical Device Commercialization By Russ King Achieve Success with European Medical Device Commercialization Given the complexity of the FDA s regulatory pathway, many medical
More informationImplementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -
TF N 687rev1 2015-06-02 CONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA - 1 I - Drafting
More informationDeclaration of Conformity
Declaration of Conformity DEMONSTRATION OF CONFORMITY WITH RECOGNIZED STANDARDS TO SATISFY THE SAFETY AND EFFECTIVENESS REQUIREMENTS OF THE CANADIAN MEDICAL DEVICES REGULATIONS Name of the medical device
More informationThe results of the impact assessment and of the workshop will be considered in the final proposal of the new directive.
EUROPEAN COMMISSION ENTERPRISE DIRECTORATE-GENERAL Conformity and standardisation, new approach, industries under new approach Mechanical and electrical equipment (including telecom terminal equipment)
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COMPLIANCE CERTIFICATION SERVICES INC. 1 Kunshan Laboratory No. 10 Wei ye Road Innovation Park Eco & Tec. Development Zone Kunshan City, Jiangsu, People s Republic
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TÜV SÜD CERTIFICATION AND TESTING (CHINA) CO., LTD. 1 SHANGHAI BRANCH 3-13 F No. 151 Heng Tong Road Shanghai, 200 070, People's Republic of China Testing Location:
More informationConsumer Products Services Germany GmbH Türkheim Germany
TEST REORT SUMMARY EN 50438 Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks Report reference number... : 11TH0290-EN50438_SUM_2 Date of issue......:
More informationCisco TelePresence MCU 4200 Series safety and compliance information
Cisco TelePresence MCU 4200 Series safety and compliance information On this page: Safety information symbols Operating guidelines Safety warnings Technical specifications Compliance information WEEE information
More informationCVS 4 TEMPLATE CUTOUT SIZE: 180mm CVS 6 TEMPLATE CUTOUT SIZE: 250mm
I N S T A L L A T I O N M A N U A L CVS CVS Tannoy has a policy of continuous improvement and this specification sheet provides the latest information at the time of printing. All specifications may be
More informationANNEALING FURNACE MODEL 414 User Maintenance Manual/Handbook
ANNEALING FURNACE MODEL 414 User Maintenance Manual/Handbook Isothermal Technology Limited, Pine Grove, Southport, PR9 9AG, England Tel: +44 (0)1704 543830 Fax: +44 (0)1704 544799 Internet: www.isotech.co.uk
More informationThis annex is valid from: to Replaces annex dated: Prolonged until
Registration : L 022 This annex is valid from: 13-09-2017 to 01-03-2018 Replaces annex dated: 13-06-2016 Prolonged until 01-09-2018 Meander 1051 6825 MJ Arnhem The Netherlands Location(s) where activities
More informationsafety & regulatory information
safety & regulatory information Document Part Number: 338610-001 Sixth Edition June 2006 This guide provides safety and regulatory information that is compliant with U.S., Canadian, and International regulations.
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-5-51 Fifth edition 2005-04 Electrical installations of buildings Part 5-51: Selection and erection of electrical equipment Common rules This English-language version is
More informationTEST REPORT IEC Safety of household and similar electrical appliances Part 2: Particular requirements for massage appliance
Test Report issued under the responsibility of: SGS- CSTC TEST REORT Safety of household and similar electrical appliances art 2: articular requirements for massage appliance Report Reference No....: GZES100800181503
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SGS-CSTC STANDARDS TECHNICAL SERVICES CO., LTD Shenzhen Branch No.1 Workshop, M-10, Middle Section, Science and Technology Park Shenzhen, Guangdong, 518057,
More informationTest Report. Appliance EMF Testing
Project: 11014506A Date: November 6, 2015 Model: 120V_WWF13NW Test Report On Appliance EMF Testing Copyright 2005 UL LLC UL LLC authorizes the above-named company to reproduce this Report provided it is
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL TECHNICAL SYSTEMS (NTS) 1536 East Valencia Drive Fullerton, California 92831 Cathy Rumble Phone: (714) 879-6110 E-mail: cathy.rumble@nts.com Website:
More informationEx SOLENOID / ALARM DRIVER. PRepower 5203B. Table of contents. Applications Safety instructions Technical characteristics...
14 Ex SOLENOID / ALARM DRIVER PRepower 5203B Table of contents Warnings... 16 Safety instructions... 17 Declaration of Conformity... 19 How to dismantle SYSTEM 5000... 20 Application... 21 Technical characteristics...
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62052-11 First edition 2003-02 Electricity metering equipment (AC) General requirements, tests and test conditions Part 11: Metering equipment This English-language version is
More informationRisk assessment and analysis for swing gates
Risk assessment and analysis for swing gates Rev 3.00 In conformity with the Machinery Directive 98/37/EC and applicable parts of the EN standards EN 13241-1; EN 12453; EN 12445; EN 12635 01/09/2007 Note:
More informationInstructions for use / Alarm unit, Fiber optic cable & Sensor patch ENGLISH
Instructions for use / Alarm unit, Fiber optic cable & Sensor patch ENGLISH Manufacturer: Redsense Medical AB Gyllenhammars väg 26 302 92 HALMSTAD SWEDEN www.redsensemedical.com These instructions are
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. F2 LABS Peters Road Middlefield, OH Wendy Fuster Phone: Ext.
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 F2 LABS 16740 Peters Road Middlefield, OH 44062 Wendy Fuster Phone: 301 253 4500 Ext. 101 ELECTRICAL (EMC) Valid To: November 30, 2019 Certificate Number: 0793.02
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Washington Laboratories, Ltd. 7560 Lindbergh
More informationGuideline Construction Products Regulation (EU) 305/20122
Guideline Construction Products Regulation (EU) 305/20122 Guideline: CPR 1 Table of contents Common Abbreviations... 4 Executive Summary... 5 Purpose of this guidance document... 5 Summary Requirements
More informationNetwork Camera. Quick Guide DC-T1233WHX. Powered by
Network Camera Quick Guide DC-T1233WHX Powered by Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE
More informationEMC TEST REPORT for HUIZHOU FREEWAY ELECTRONIC CO., LTD. Car DVD/Navigation Player
EMC TEST REPORT for HUIZHOU FREEWAY ELECTRONIC CO., LTD Car DVD/Navigation Player Model No.: DT-063F, DT-0637, DT-0635, DT-0633, DT-0632, DT-0663, DT-063H, NAV-CF 8000 Prepared for : HUIZHOU FREEWAY ELECTRONIC
More informationRecent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees
INTERNATIONAL ELECTROTECHNICAL COMMISSION Recent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees Don Heirman presenting for Robert Sitzmann (TC 62) APEMC symposium
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61000-4-8 Edition1.1 2001-03 Edition 1:1993 consolidated with amendment 1:2000 BASIC EMC PUBLICATION Electromagnetic compatibility (EMC) Part 4-8: Testing and measurement techniques
More informationRecent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees
INTERNATIONAL ELECTROTECHNICAL COMMISSION Recent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees Don Heirman presenting for Robert Sitzmann (TC 62) APEMC symposium
More informationThis document is a preview generated by EVS
IEC 61000-6-2 Edition 3.0 2016-08 REDLINE VERSION colour inside Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity standard for industrial environments IEC 61000-6-2:2016-08 RLV(en)
More informationEMC Bayswater Pty Ltd
EMC Bayswater Pty Ltd EMC BAYSWATER PTY LTD Accreditation Number: 18553 Site Number: 20485 Address Details: Unit 18, 88 Merrindale Drive CROYDON SOUTH, VIC 3136 AUSTRALIA Website: www.emcbayswater.com.au
More informationClipsal is a registered trademark of Clipsal Australia Pty Ltd. Saturn is a trademark of Clipsal Australia Pty Ltd.
Clipsal is a registered trademark of Clipsal Australia Pty Ltd. Saturn is a trademark of Clipsal Australia Pty Ltd. Copyright Clipsal Australia Pty Ltd, 2008. All rights reserved. This material is copyright
More informationPQS Independent type-testing protocol
PQS Independent type-testing protocol WHO/XXX Original: English Distribution: General TITLE: Wall-mounted pen recording thermometer Product verification protocol: E06/TR04VP Applies to specification ref(s):
More informationAnalog Melting Point Apparatus
Analog Melting Point Apparatus User Guide Version 1.2 7. Turn off to begin cooling. A brass plug can be used if more rapid cooling is required. IEC power inlet socket (at rear) Magnifying lens Capillary
More informationMaxiCompressor. Limited Warranty. High Performance 50 PSI Compressor 501-S
Limited Warranty Global Medical Holdings (GMH) warrants the MaxiCompressor for 1 year from the date of purchase due to faulty parts or workmanship. This warranty is limited to the original purchaser of
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60601-1-2 Third edition 2007-03 Medical electrical equipment Part 1-2: General requirements for basic safety and essential performance Collateral standard: Electromagnetic compatibility
More informationCENELEC GUIDE 24. Electromagnetic Compatibility (EMC) Standardization for Product Committees concerned with apparatus. Edition 3,
CENELEC GUIDE 24 Electromagnetic Compatibility (EMC) Standardization for Product Committees concerned with apparatus Edition 3, 2009-12 This third edition of CENELEC Guide 24, prepared by CENELEC Technical
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COSMOS CORPORATION 1 718-1, Katsurase-Cho Matsusaka-shi, Mie 515-1104 JAPAN Akira Sakai (Authorized Representative) +81 598-30-6211 sakai-akira@cosmos-corp.com
More informationORIGA-SENSOFLEX Displacement Measuring System for Cylinder Series OSP-P
ORIGA-SENSOFLEX Displacement Measuring System for Cylinder Series OSP-P Contents Description Data Sheet No. Page Overview P-1.50.001E 117-118 Technical Data SFI-plus P-1.50.002E-1, 2 119-120 Dimensions
More informationEMI/RFI Filters. Motor Protection
The EMC solution The Enerdoor Group is an international leader in the development and production of electromagnetic solutions for automated and industrial machinery. The Group's broad range of products
More informationThe Impact of Marking Requirements. on Design and Performance of Power Converters and Electrical Drives
European The Impact of Marking Requirements on Design and Performance of Power Converters and Electrical Drives Harmonization of Standards The Key to the European Market C onfused E urope EN 600204 BS...
More informationLoud Technologies, Inc. CE DECLARATION OF CONFORMITY
Loud Technologies, Inc. CE DECLARATION OF CONFORMITY Manufacturer s Name: Location of Declarations: Manufacturer Address(s): EAW (Eastern Acoustic Works) Loud Technologies, Inc. 16220 Wood-Red Rd. 98072
More informationRole of CE Marking in the Placing on the Market of Electronic Components
Explanatory Leaflet Role of CE Marking in the Placing on the Market of Electronic Components New Legislative Framework Component Industries RoHs Directive CE Marking Low Voltage Directive Electronic Components
More informationCERTIFICATE. Issued Date: Dec. 23, 2010 Report No.: 10C142R-ITCEP7V05
CERTIFICATE Issued Date: Dec. 23, 2010 Report No.: 10C142R-ITCEP7V05 This is to certify that the following designated product Product : Compact Size 8 port serial Device Server Trade name : Moxa Model
More informationCO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE
CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 PPE-R/00.017 Version 2 RECOMMENDATION FOR USE Number of pages: 5 Approval stage : Approved on : Origin : Horizontal Committee, C2D Ad hoc group
More information