NATURAL GAS - CALCULATION OF
|
|
- Morris Leo Riley
- 6 years ago
- Views:
Transcription
1 IRISH STANDARD I.S. EN ISO :2005 ICS National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland NATURAL GAS - CALCULATION OF COMPRESSION FACTOR - PART 2: Tel: Fax: Sales CALCULATION USING MOLAR-COMPOSITION ANALYSIS (ISO :1997) NSAI 2005 Údarás um Chaighdeáin Náisiúnta na héireann This Irish Standard was published under the authority of the National Standards Authority of Ireland and comes into effect on: July 7, 2005 NO COPYING WITHOUT NSAI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Price Code K
2
3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO May 2005 ICS English version Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO :1997) Gaz naturel - Calcul du facteur de compression - Partie 2: Calcul à partir de l'analyse de la composition molaire (ISO :1997) Erdgas - Berechnung von Realgasfaktoren - Teil 2: Berechnungen basierend auf einer molaren Gasanalyse als Eingangsgröße (ISO :1997) This European Standard was approved by CEN on 17 April CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. B-1050 Brussels Ref. No. EN ISO :2005: E
4 EN ISO :2005 (E) Foreword The text of ISO :1997 has been prepared by Technical Committee ISO/TC 193 "Natural gas of the International Organization for Standardization (ISO) and has been taken over as EN ISO :2005 by CMC. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2005, and conflicting national standards shall be withdrawn at the latest by November According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO :1997 has been approved by CEN as EN ISO :2005 without any modifications. 2
5 INTERNATIONAL STANDARD ISO First edition Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis Gaz naturel Calcul du facteur de compression Partie 2: Calcul par analyse de la composition molaire A Reference number ISO :1997(E)
6 ISO :1997(E) Contents Page 1 Scope Normative references Definitions Method of calculation Principle The AGA8-92DC equation Input variables Ranges of application Uncertainty Suppliers of computer programmes... 6 Annexes A Symbols and units... 7 B Description of the AGA8-92DC method... 9 C Example calculations D Pressure and temperature conversion factors E Performance over wider ranges of application F Subroutines in Fortran for the AGA8-92DC method G Bibliography ISO 1997 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Organization for Standardization Case postale 56 CH-1211 Genève 20 Switzerland Internet central@iso.ch X.400 c=ch; a=400net; p=iso; o=isocs; s=central Printed in Switzerland ii
7 The remainder of this document is available for purchase online at SAI Global also carries a wide range of publications from a wide variety of Standards Publishers: Click on the logos to search the database online.
HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO 10664:2005) IRISH STANDARD I.S. EN ISO 10664:2005. Price Code
IRISH STANDARD I.S. EN ISO 10664:2005 ICS 21.060.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO Tel: +353 1 807 3800
More informationLABORATORY GLASSWARE - GRADUATED MEASURING CYLINDERS (ISO 4788:2005) IRISH STANDARD I.S. EN ISO 4788:2005. Price Code
IRISH STANDARD I.S. EN ISO 4788:2005 ICS 17.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie LABORATORY GLASSWARE - GRADUATED
More informationCLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: VISUAL METHOD (ISO :2004) IRISH STANDARD I.S. EN ISO :2005
IRISH STANDARD I.S. EN ISO 4630-1:2005 ICS 87.060.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: Tel:
More informationCONFORMITY ASSESSMENT - SUPPLIER'S
STANDARD I.S. EN ISO/IEC 17050-2:2004 ICS 03.120.20 National Standards Authority of Ireland Dublin 9 Ireland CONFORMITY ASSESSMENT - SUPPLIER'S Tel: (01) 807 3800 Fax: (01) 807 3838 DECLARATION OF CONFORMITY
More informationPAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001) IRISH STANDARD I.S. EN ISO 2758:2003. Price Code
IRISH STANDARD I.S. EN ISO 2758:2003 ICS 85.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie PAPER - DETERMINATION OF
More informationPLASTICS - DETERMINATION OF THE MELT
IRISH STANDARD I.S. EN ISO 1133:2005 ICS 83.080.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT Tel: +353 1
More informationPISTON-OPERATED VOLUMETRIC
IRISH STANDARD I.S. EN ISO 8655-7:2005 ICS 17.060 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 7: NON-GRAVIMETRIC METHODS FOR THE ASSESSMENT OF National Standards Authority of Ireland Glasnevin, Dublin
More informationCOMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: PHYSICAL AND LINK LAYER IRISH STANDARD I.S. EN :
IRISH STANDARD I.S. EN 13757-2:2005 ICS 33.200 35.100.10 35.100.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland COMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: Tel:
More informationWATER QUALITY - CRITERIA FOR
STANDARD I.S. EN ISO 17994:2004 ICS 07.100.20 13.060.70 National Standards Authority of Ireland Dublin 9 Ireland WATER QUALITY - CRITERIA FOR Tel: (01) 807 3800 Fax: (01) 807 3838 ESTABLISHING EQUIVALENCE
More informationBIOLOGICAL EVALUATION OF MEDICAL
IRISH STANDARD I.S. EN ISO 10933-12:2007 ICS 11.100.20 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353
More informationCLEANROOMS AND ASSOCIATED
STANDARD I.S. EN ISO 14698-1:2003 ICS 13.040.35 CLEANROOMS AND ASSOCIATED National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 CONTROLLED ENVIRONMENTS - BIOCONTAMINATION
More informationELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) IRISH STANDARD I.S. EN 62382:2007. Price Code
IRISH STANDARD I.S. EN 62382:2007 ICS 25.040.01 ELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800
More informationSTEELS MICROGRAPHIC DETERMINATION THE APPARENT GRAIN SIZE (ISO 643:2003) IRISH STANDARD I.S. EN ISO 643:2003. Price Code
IRISH STANDARD I.S. EN ISO 643:2003 ICS 77.040.99 National Standards Authority of Ireland Dublin 9 Ireland STEELS MICROGRAPHIC DETERMINATION Tel: (01) 807 3800 Tel: (01) 807 3838 OF THE APPARENT GRAIN
More informationOVERHEAD ELECTRICAL LINES EXCEEDING
IRISH STANDARD I.S. EN 50423-1:2005 ICS 29.240.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV UP TO AND INCLUDING AC 45 KV Tel: +353
More informationPACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code
STANDARD I.S. EN 13430:2004 ICS 13.030.50 55.020 National Standards Authority of Ireland Dublin 9 Ireland PACKAGING - REQUIREMENTS FOR Tel: (01) 807 3800 Fax: (01) 807 3838 PACKAGING RECOVERABLE BY MATERIAL
More informationREFRIGERATING SYSTEMS AND HEAT
IRISH STANDARD I.S. EN 378-2:2008 ICS 27.200 27.080 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie REFRIGERATING SYSTEMS
More informationPETROLEUM AND NATURAL GAS
IRISH STANDARD I.S. EN ISO 10432:2005 ICS 75.180.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - Tel: +353 1 807 3800
More informationCONVENTIONS CONCERNING ELECTRIC AND MAGNETIC CIRCUITS (IEC 60375:2003) IRISH STANDARD I.S. EN 60375:2003. Price Code
IRISH STANDARD I.S. EN 60375:2003 ICS National Standards Authority of Ireland Dublin 9 Ireland CONVENTIONS CONCERNING ELECTRIC AND Tel: (01) 807 3800 Tel: (01) 807 3838 MAGNETIC CIRCUITS (IEC 60375:2003)
More informationSTEEL TUBES AND FITTINGS FOR ON SHORE AND OFFSHORE PIPELINES - INTERNAL LINING WITH CEMENT MORTAR IRISH STANDARD I.S. EN 10298:2005.
IRISH STANDARD I.S. EN 10298:2005 ICS 23.040.10 23.040.40 25.220.99 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland STEEL TUBES AND FITTINGS FOR ON SHORE AND OFFSHORE PIPELINES - INTERNAL
More informationALARM SYSTEMS - INTRUSION AND
IRISH STANDARD I.S. EN 50131-1:2006 ICS 13.310 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS -- PART 1: SYSTEM Tel: +353 1 807 3800 Fax:
More informationCROSS RECESSED RAISED COUNTERSUNK HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD (ISO 15483:1999) IRISH STANDARD I.S. EN ISO 15483:2000.
IRISH STANDARD I.S. EN ISO 15483:2000 ICS 21.060.10 National Standards Authority of Ireland Dublin 9 Ireland CROSS RECESSED RAISED COUNTERSUNK Tel: (01) 807 3800 Tel: (01) 807 3838 HEAD DRILLING SCREWS
More informationDECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 15102:2007 ICS 91.180 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie DECORATIVE WALLCOVERINGS -
More informationNATURAL STONE PRODUCTS - MODULAR TILES - REQUIREMENTS IRISH STANDARD I.S. EN 12057:2004. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 12057:2004 ICS 91.100.15 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie NATURAL STONE PRODUCTS -
More informationEXECUTION OF SPECIAL GEOTECHNICAL WORKS - MICROPILES IRISH STANDARD I.S. EN 14199:2005. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann 93.
IRISH STANDARD I.S. EN 14199:2005 ICS 93.020 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie EXECUTION OF SPECIAL GEOTECHNICAL
More informationSOLID BIOFUELS - METHODS FOR
IRISH STANDARD I.S. CEN/TS 15105:2005 ICS 75.160.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland SOLID BIOFUELS - METHODS FOR DETERMINATION OF THE WATER SOLUBLE Tel: +353 1 807 3800
More informationPHOTOVOLTAIC DEVICES -- PART 2:
IRISH STANDARD I.S. EN 60904-2:2007 ICS 27.160 PHOTOVOLTAIC DEVICES -- PART 2: REQUIREMENTS FOR REFERENCE SOLAR National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800
More informationGlass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)
Irish Standard I.S. EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) NSAI 2011 No copying without NSAI permission except
More informationPaper and board - Determination of grammage (ISO 536:2012)
Irish Standard I.S. EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard
More informationRAILWAY APPLICATIONS - ELECTROTECHNICAL EQUIPMENT FOR ROLLING STOCK PART 5: ELECTROTECHNICAL COMPONENTS RULES FOR HV FUSES (IEC :2003)
IRISH STANDARD I.S. 60077-5:2003 ICS 45.060 RAILWAY APPLICATIONS - ELECTROTECHNICAL EQUIPMENT FOR ROLLING STOCK National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807
More informationFounding - Magnetic particle testing
Irish Standard Founding - Magnetic particle testing CEN 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus
More informationFoodstuffs - Determination of vitamin C by HPLC
Irish Standard I.S. EN 14130:2003 Foodstuffs - Determination of vitamin C by HPLC NSAI 2003 No copying without NSAI permission except as permitted by copyright law. This document was published under the
More informationSECONDARY CELLS AND BATTERIES
STANDARD I.S. EN 61960:2004 ICS 29.220.99 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR TOHER National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Fax: (01) 807 3838 NON-ACID
More informationILNAS-EN ISO :2005
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2005) Matériaux métalliques - Essai de dureté Vickers - Partie 1: Méthode d'essai (ISO 6507-1:2005) Metallische Werkstoffe -
More informationOffice furniture - Office work chair - Part 2: Safety requirements
Irish Standard Office furniture - Office work chair - Part 2: Safety requirements NSAI 2009 No copying without NSAI permission except as permitted by copyright law. EN 1335-2:2009 I.S. EN 1335-2:2000 EN
More informationMetallic materials - Calibration of forceproving instruments used for the verification of uniaxial testing machines (ISO 376:2011)
Irish Standard I.S. EN ISO 376:2011 Metallic materials - Calibration of forceproving instruments used for the verification of uniaxial testing machines (ISO 376:2011) NSAI 2011 No copying without NSAI
More informationPACKAGING MATERIALS AND SYSTEMS FOR MEDICAL DEVICES WHICH ARE TO BE STERILIZED - PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES
IRISH STANDARD I.S. EN 868-10:2000 ICS 11.080.30 55.040 PACKAGING MATERIALS AND SYSTEMS FOR MEDICAL DEVICES WHICH ARE TO BE STERILIZED - PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES National
More informationResilient, textile and laminate floor coverings - Classification (ISO 10874:2009)
Irish Standard I.S. EN ISO 10874:2012 Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) NSAI 2012 No copying without NSAI permission except as permitted by copyright law.
More informationHOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY PART 2-13: PARTICULAR REQUIREMENTS FOR DEEP FAT FRYERS, FRYING PANS AND SIMILAR
IRISH STANDARD I.S. EN 60335-2-13:2003 ICS 97.040.20 97.040.50 13.120 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY PART 2-13: National Standards Authority of Ireland Dublin 9 Ireland Tel: (01)
More informationPaints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011)
Irish Standard Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) NSAI 2011 No copying without NSAI permission except as permitted
More informationHexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
Irish Standard I.S. EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:
More informationCylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs
Irish Standard I.S. EN 13906-1:2013 Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs CEN 2013 No copying without NSAI permission except as
More informationREFRIGERATING SYSTEMS AND HEAT
IRISH STANDARD I.S. EN 12693:2008 ICS 23.140 27.080 National Standards Authority of Ireland Northwood, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie REFRIGERATING SYSTEMS
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 13443:2005 Natural gas - Standard reference conditions Natural gas - Standard reference conditions EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti
More informationALARM SYSTEMS - INTRUSION AND
IRISH STANDARD I.S. CLC/TS 50131-4:2006 ICS 13.310 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS -- PART 4: WARNING Tel: +353 1 807 3800
More informationLOAD RESTRAINT ASSEMBLIES ON ROAD VEHICLES - SAFETY - PART 2: WEB LASHING MADE FROM MAN-MADE FIBRES IRISH STANDARD I.S. EN :
IRISH STANDARD I.S. ICS 53.080 55.180.99 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 LOAD RESTRAINT ASSEMBLIES ON ROAD VEHICLES - SAFETY - PART 2: WEB
More informationCamping tents (ISO 5912:2011)
Irish Standard I.S. EN ISO 5912:2011 Camping tents (ISO 5912:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based
More informationILNAS-EN ISO 10684:2004
Fasteners - Hot dip galvanized coatings (ISO 10684:2004) Éléments de fixation - Revêtements de galvanisation à chaud (ISO 10684:2004) Verbindungselemente - Feuerverzinkung (ISO 10684:2004) 07/2004 National
More informationSterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO (ISO :2009)
Standard Recommendation S.R. CEN ISO/TS 17665-2:2009 Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 (ISO 17665-2:2009) NSAI 2009 No copying without
More informationHOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY PART 2-95: PARTICULAR REQUIREMENTS FOR DRIVES FOR VERTICALLY MOVING GARAGE DOORS
IRISH STANDARD I.S. EN 60335-2-95:2005 ICS 13.120 29.120.01 91.090 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY PART 2-95: PARTICULAR REQUIREMENTS FOR DRIVES National Standards Authority of Ireland
More informationWater-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
Irish Standard I.S. EN 12952-3:2011 Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler NSAI 2011 No copying without NSAI permission except
More informationILNAS-EN ISO 2692:2006
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006) Geometrische
More informationSTEEL TUBES AND FITTINGS FOR
IRISH STANDARD I.S. EN 10288:2002 ICS 23.040.10 23.040.40 25.220.60 STEEL TUBES AND FITTINGS FOR National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 ONSHORE AND
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 10720:2007 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas Steel and iron - Determination of nitrogen
More informationIrish Standard I.S. EN :2011
Irish Standard Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified) NSAI 2011 No copying
More informationFurniture - Children's cots and folding cots for domestic use - Part 2: Test methods
Irish Standard Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods CEN 2013 No copying without NSAI permission except as permitted by copyright law. EN 716-2:2008/A1:2013
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32289-2 Edition 1 EN 1176-7:2008 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation This
More informationIrish Standard I.S. EN :2009
Irish Standard NSAI 2009 No copying without NSAI permission except as permitted by copyright law. Incorporating amendments/corrigenda issued since publication: This document is based on: This document
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29889-0 Edition 1 EN 572-6:2012 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass This national standard is
More informationBitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation
Irish Standard I.S. EN 12606-1:2015 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation CEN 2015 No copying without NSAI permission except as permitted
More informationILNAS-EN ISO 23640:2015
In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) In-vitro-Diagnostika - Haltbarkeitsprüfung von Reagenzien für invitro-diagnostische Untersuchungen
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12369-2:2004 Wood-based panels - Characteristic values for structural design - Part 2: Plywwood Wood-based panels - Characteristic values for structural design - Part 2: Plywwood
More informationHIGH -VOLTAGE SWITCHGEAR AND
IRISH STANDARD I.S. EN 62271-102 ICS 29.130.10 29.130.99 HIGH -VOLTAGE SWITCHGEAR AND CONTROLGEAR PART 102: ALTERING CURRENT DISCONNECTORS AND EARTHING National Standards Authority of Ireland Glasnevin,
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15205:2007 Determination of hexavalent chromium in corrosion protection layers - Qualitative analysis Determination of hexavalent chromium in corrosion protection layers - Qualitative
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 10664:2005 Hexalobular internal driving feature for bolts and screws Hexalobular internal driving feature for bolts and screws EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL
More informationPlastic containers for intravenous injections (ISO 15747:2010)
Irish Standard Plastic containers for intravenous injections (ISO 15747:2010) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification
More informationBitumen and bituminous binders - Specifications for paving grade bitumens
Irish Standard I.S. EN 12591:2009 Bitumen and bituminous binders - Specifications for paving grade bitumens NSAI 2009 No copying without NSAI permission except as permitted by copyright law. EN 12591:2009
More informationPetroleum, petrochemical and natural gas industries - Hairpin-type heat exchangers (ISO 12212:2012)
Irish Standard I.S. EN ISO 12212:2012 Petroleum, petrochemical and natural gas industries - Hairpin-type heat exchangers (ISO 12212:2012) NSAI 2012 No copying without NSAI permission except as permitted
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 11064-4:2004 Ergonomic design of control centres - Part 4: Layout and dimensions of workstations Ergonomic design of control centres - Part 4: Layout and dimensions of workstations
More informationOperation of electrical installations -- Part 1: General requirements
Irish Standard I.S. EN 50110-1:2013 Operation of electrical installations -- Part 1: General requirements CENELEC 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 17657-4:2007 Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system Resistance welding - Welding current measurement for resistance
More informationMedical gloves for single use - Part 2: Requirements and testing for physical properties
Irish Standard I.S. EN 455-2:2015 Medical gloves for single use - Part 2: Requirements and testing for physical properties CEN 2015 No copying without NSAI permission except as permitted by copyright law.
More informationEN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006)
ÖNORM EN ISO 14731 Edition: 2007-03-01 Welding coordination Tasks and responsibilities (ISO 14731:2006) Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006) Coordination en soudage Tâches et responsabilités
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 6507-4:2006 Metallic materials - Vickers hardness test - Part 4: Tables and hardness values Metallic materials - Vickers hardness test - Part 4: Tables and hardness values EESTI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 1084:2004 Fasteners - Hot dip galvanized coatings Fasteners - Hot dip galvanized coatings EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 7-2:2004 Plastics - Determination of temperature of deflection under load - Part 2: Plastics, ebonite and long-fibrereinforced composites Plastics - Determination of temperature
More informationPlastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO :2010)
Irish Standard I.S. EN ISO 11298-3:2011 Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2010) NSAI 2011 No copying without
More informationHigh-voltage switchgear and controlgear -- Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kv (IEC :2011 (EQV))
Irish Standard I.S. EN 62271-203:2012 High-voltage switchgear and controlgear -- Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kv (IEC 62271-203:2011 (EQV)) NSAI 2012 No
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 9554:2005 Fibre ropes - General specification Fibre ropes - General specification EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14175-6:2006 Fume cupboards - Part 6: Variable air volume fume cupboards Fume cupboards - Part 6: Variable air volume fume cupboards EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 7200:2004 Technical product documentation - Data fields in title blocks and document headers Technical product documentation - Data fields in title blocks and document headers
More informationMassa Våtuppslagning på laboratoriet Del 1: Våtuppslagning av kemisk massa (ISO :2004)
SVENSK STANDARD SS-EN ISO 5263-1:2004 Fastställd 2004-10-01 Utgåva 1 Massa Våtuppslagning på laboratoriet Del 1: Våtuppslagning av kemisk massa (ISO 5263-1:2004) Pulps Laboratory wet disintegration Part
More informationRadiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012)
Irish Standard I.S. EN ISO 2919:2014 Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012) CEN 2014 No copying without NSAI permission except as
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 16264:2004 Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection Water quality - Determination of soluble silicates by flow
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 15902:2005 Optics and optical instruments - Diffractive optics - Vocabulary Optics and optical instruments - Diffractive optics - Vocabulary EESTI STANDARDIKESKUS EESTI STANDARDI
More informationGas meters - Additional functionalities
Irish Standard Gas meters - Additional functionalities CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus
More informationQuality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations
Irish Standard I.S. EN 9101:2011 Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations NSAI 2011 No copying without NSAI permission except as permitted by copyright
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 2486:2005 Aerospace series - Aluminium alloy AL- P2618A - Forging stock Aerospace series - Aluminium alloy AL-P2618A - Forging stock EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA
More informationLIGHTING APPLICATIONS - TUNNEL LIGHTING IRISH STANDARD I.S. CR 14380: Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. CR 14380:2003 ICS 93.060 93.080.40 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 LIGHTING APPLICATIONS - TUNNEL LIGHTING NSAI 2003 Údarás
More informationGlaskärl Halsringar Del 3: 38 normal (ISO :2005) Glass containers Vacuum lug finishes Part 3: 38 regular (ISO :2005)
SVENSK STANDARD SS-EN ISO 9100-3:2005 Fastställd 2005-11-11 Utgåva 1 Glaskärl Halsringar Del 3: 38 normal (ISO 9100-3:2005) Glass containers Vacuum lug finishes Part 3: 38 regular (ISO 9100-3:2005) ICS
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 9100-2:2005 Glass containers - Vacuum lug finishes - Part 2: 33 medium Glass containers - Vacuum lug finishes - Part 2: 33 medium EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1926:2007 Natural stone test methods - Determination of uniaxial compressive strength Natural stone test methods - Determination of uniaxial compressive strength EESTI STANDARDIKESKUS
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 10715:2000 Natural gas - Sampling guidelines Natural gas - Sampling guidelines EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN ISO
More informationSVENSK STANDARD SS-EN ISO 13897:2005. Tandvård Amalgamkapslar (ISO 13897:2003) Dentistry Amalgam capsules (ISO 13897:2003)
SVENSK STANDARD SS-EN ISO 13897:2005 Fastställd 2005-04-15 Utgåva 1 Tandvård Amalgamkapslar (ISO 13897:2003) Dentistry Amalgam capsules (ISO 13897:2003) ICS 11.060.10 Språk: engelska Publicerad: maj 2005
More informationILNAS-EN ISO :2017
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle (ISO 9606-1:2012, einschließlich
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 2884-1:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear Paints and varnishes
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 9111:2006 Aerospace series - Quality management systems - Assessment applicable to maintenance organizations (based on ISO 9001:2000) Aerospace series - Quality management systems
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32290-8 EN 1176-10:2008 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment
More information