Models 65, F65, 150 & F150

Transcription

1 Models 65, F65, 50 & F50 Purgemeters Customer Value Proposition: Porter variable area flowmeters include 65mm and 50mm scale length tube assemblies and are available in either forged body or side-plate construction. Forged body models feature a wrap-around window for full 80 tube visibility and an attractive forged one-piece bacl anodized aluminum body. Side-plate constructed models are conveniently interchangeable with competitive designs. Porter control valves, including the exclusive Torque Guard cartridge, can be added to either style flowmeter for precise flow indication and control in one economical unit. Multi-tube side-plate models, ranging from two to six tubes, are available with or without control valves and can include individual inlet and outlet connections or manifold ports according to your specifications. Contact Information: Parker Hannifin Corporation Porter Instrument Division 245 Township Line Road Hatfield, PA 9440 phone fax industrial@parker.com Product Features: Interchangeable flow tube assemblies and valves allow configuration changes without removal from process system Rib-guided, compression sealed flow tubes for maximum float stability Ceramic scales fired on flow tubes against a contrasting background provide high visibility and durability Standard or high-resolution metering valves available on inlet or outlet Ten-to-one rangeability

2 Forged Body Flowmeters The Porter models F65 and F50 forged body flowmeters feature a compact, one-piece, black anodized forged aluminum body with wraparound windo for full 80 visibility of the flow tubes. These units are available with aluminum, brass or 36 stainless steel wetted parts. Model F65 Model F50 Side Plate Flowmeters The Porter models 65 and 50 side plate constructed flowmeters combine a traditional body style with innovative design features. They are available with aluminum, brass or 36 stainless steel wetted parts. Multi-tube (2 to 6 tube) versions are available with optional valves and manifold inlet/outlet ports. Model 65 Model 50

3 Specifications Capacities- Length: Models F65 and 65-65mm; Models F50 and 50-50mm. Type: Fused on metering tube with contrasting yellow background Graduations: Standard- Models F65 and 65: 0-65mm w/ calibration data; Models F50 and 50: 0-50mm w/ calibration data. Optional: Direct reading scales Ratings- Pressure/Temperature: Neoprene packing/ Buna N O-rings- 200 psig at temperatures up to 60 F Viton packing/viton O-rings-200 psig at temperatures up to 200 F Performance- Accuracy: Models F65 and 65: ± 0% full scale; Models F50 and 50: ± 5% full scale. Accuracy specified for 00%- 0% of scale reading ( 0 to rangeability). Repeatability: Models F65 and 65: ± 0.5% of full scale reading; Models F50 and 50: ±0.25% of full scale reading. Connections- /8 female NPT threaded adaptors with locknuts for front panel mounting. Optional: /8 compression fitting; /4 compression fitting; /4 NPT female; /4 I.D.Hose. To order, Specify: Model Number Tube Number Float Material Connections (Type & Size) Fluid Specifications (Specific gravity & viscosity) Flow Rate Operating Pressure Operating Temperature Material of Construction for a) End fitting b) Side plates or meter body c) Elastomers Materials of Construction Metering Tube- Borosilicate glass Floats- glass, stainless steel. Optional: Sapphire, carboloy and tantalum Structual Members- Metering body: (F65 and F50) black anodized aluminum. Optional: stainless steel. Wetted Parts: Aluminum, brass or 36 stainless steel End Fittings: Black anodized aluminum or chrome plated brass or 36 stainless steel Shields- Clear polycarbonate Tube packing and O-Rings- Neoprene packing and Buna N O-Rings with aluminum or brass construction. Viton packing and Viton O- rings with stainless steel construction. Optional Materials: Teflon Ordering Information Model Numbers and Description F65 A Example: V 2 Basic Model F65-65mm Forged Body F50-50mm Forged Body 65-65mm Side Plate Body 50-50mm Side Plate Body Body Material A- Aluminum B- Brass S- Stainless Steel Valve O- No Valve V- Standard Cartridge Control Valve HR- High Resolution Control Valve Valve Size 0 thru 6 High Resolution Control Vale thru 3 Standard Cartridge Valve -TG Torque Guard Taper 2-TG Torque Gurad Taper 2

4 WARNING USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems. Offer of Sale The items described in this document are hereby offered for sale by Parker-Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the detailed Offer of Sale elsewhere in this document or available at 20 Parker Hannifin Corporation WS-002, Rev 0 November 20

5 P430 Series Glass Tube Flow Meters Parker P Series glass tube flowmeters deliver unsurpassed performance and value in a wide variety of gas and liquid applications. P430 Series flow meters feature borosilicate glass tubes with stainless steel frames and horizontal connections and are available with 65mm and 50mm scale sizes. Available Fiber-Optic or Inductive Ring Sensor Alarms, as well as integrated metering valves provide the needed versatility for many industrial process and sample handling applications. Contact Information: Product Features and Options: Parker Hannifin Corporation Porter Instrument Division 245 Township Line Road Hatfield, PA 9440 phone fax Industrial@parker.com Borosilicate glass metering tube. Max temperature: 250 F (2 C) for gases 200 F (93 C) for liquids Max Pressure: 200 PSIG (see specifications) Optional inductive ring and fiber optic alarm sensors available. Certified calibrations conforming to ISA RP 6.6 available. Direct reading detachable scales available in any volumetric unit.

6 Specifications Materials Metering Tube Internal Components Inlet/Outlet Fittings Fitting Material Elastomers Options Borosilicate Glass 36L Stainless Steel, Black Glass, Sapphire, Carboloy, Tantalum /8" and /4" FNPT, Horizontal Control Valve Optional 36L Stainless Steel Viton Optional: Buna, EPR, and Kalrez Fiber-Optic or Inductive Ring Alarm Sensor (see details) Certified Conform to ISA RP 6.6 Calibrations Can be produced in any volumetric Scales unit Viton and Kalrez are registered trademarks of DuPont Performance Elastomers L.L.C. Performance Capacities Scale Accuracy Turndown Water Air Repeatability % Maximum Temperature Maximum Pressures Ambient Temperature.72 to,800 cc/mn 66 to 70,000 cc/mn 65mm, 50mm Direct reading, detachable 65mm ±6% of Full Scale Flow 50mm ±4% of Full Scale Flow 0: to 2.5:, unless otherwise indicated Gases 250 F (2 C) Liquids 200 F (93 C) 36L SS Fittings 200 psig PVC Fittings 30 psig PVDF Fittings 50 psig 33 F to 25 F ( C to 52 C) Alarm Options: Inductive Ring Sensor Inductive ring sensors are designed to be used with a remote intrinsic safety barrier/switch isolator. These sensors are able to detect the metal float by producing an electromagnetic field within the ring. Ring sensors are available in either proximity or latching format for the P430 Series. Sensor Specifications Power Supply 5-25 VDC (from Switch Isolator) Maximum Current Target Present: ma Target Absent: 5 ma Temperature Limits -4 F to +58 F (-26 C to +70 C) Output NAMUR Repeatability 0.0mm Switching Frequency 2 khz (.25"),.5 khz (.25") UL Listed: General Purpose Sensor Approvals FM Approved: Intrinsically Safe* CSA Certified: Intrinsically Safe* Cenelec: Intrinsically Safe* *Additional cost, call for pricing Float/Sensor Campatibility Type Tube Sizes Float Material Proximity.25".25" SS, CB Latching.25".25" SS, CB Fiber Optic Sensor The fiber optic sensor is housed in a junction box attached to the side of a P430 Series flowmeter. The sensor uses a pair of fiber optic cables, an emitter and receiver to transmit the light across the metering tube and back to the sensor. If the light beam is blocked by the float, the sensor output will change. The sensor provides a transistor output that switches the common or negative voltage (NPN) or positive voltage (PNP) to the load. The fiber optic sensor is compatible with all P430 Series float types. Sensor Specifications Supply Voltage Current Consumption Temperature Limits Offstate Leakage Current Output Saturation Voltage 0-30 VDC 25 ma -4 F to +22 F (-26C to +00 C) microamp at 30 VDC V at 0 ma DC <.5 V at 50 ma DC Note: Sapphire floats are not compatable with Fiber Optic Sensor

7 Flow Ranges Tube Number A A2 A3 A4 A5 A6 Float Material 65mm Scale Flow Ranges Air (STP) CC/ MIN SCFH SLPH Water (70 F) CC/ MIN GPH LPH Glass Sapphire Stainless Steel Carboloy Tantalum Glass Sapphire Stainless Steel Carboloy Tantalum Glass Sapphire Stainless Steel Carboloy Tantalum Glass Sapphire Stainless Steel Carboloy Tantalum Glass Sapphire Stainless Steel 3, Carboloy 9, Tantalum 20, Glass 9, Sapphire 25, Stainless Steel 42, Carboloy 60, Tantalum 70, Tube Number B B2 B3 B4 B5 B6 B7 B8 Float Material 50mm Scale Flow Ranges Air (STP) CC/MIN SCFH SLPH Water (70 F) CC/ MIN GPH LPH Carboloy Tantalum Glass Sapphire Stainless Steel Carboloy Tantalum Glass Sapphire Stainless Steel Carboloy, Tantalum, Glass Sapphire, Stainless Steel, Carboloy 2, Tantalum 2, Glass 2, Sapphire 2, Stainless Steel 4, Carboloy 6, Tantalum 6, Glass 3, Sapphire 5, Stainless Steel 7, Carboloy 0, Tantalum, Glass 9, Sapphire, Stainless Steel 7, , Carboloy 24, , Tantalum 25, , Glass 20, , Sapphire 26, , Stainless Steel 38, , Carboloy 54, , Tantalum 60, ,

8 Ordering Information Use the following guide to determine the specific product number you require. The following example describes a P430 series flow meter, tube number A, with a glass float, /4" FNPT fitting of 36L stainless steel, a Buna O-ring, with a scale in millimeters and 36L stainless steel inlet valve. It does not have an optional alarm. Example: P430A230 P430 A 2 3 Meter Series P430 Tube Number See Flow Ranges Table Float Material Glass 2 Sapphire 3 36 Stainless Steel 4 Carboloy 5 Tantalum Dimensions Fitting Material 36L Stainless Steel /8" FNPT 2 36L Stainless Steel /4" FNPT 3 PVC /4" FNPT 4 PVC /8" FNPT 5 PVDF /4" FNPT 6 PVDF /8" FNPT 7 Hastelloy C /4" FNPT 8 Hastelloy C /8" FNPT O-Ring Material Ethylene Propylene Rubber 2 Buna 3 Viton 4 Kalrez with No Valve 5 Kalrez with Valve Hastelloy is a registered trademark of Haynes International, Inc. Viton and Kalrez are registered trademarks of DuPont Performance Elastomers L.L.C. Scale Millimeter 2 GPH 70 F (2 C) 3 LPH 70 F (2 C) 4 cc/min STP 5 SCFH STP 6 SLPH STP 7 scc/min STP 8 Non-Standard Dimensions (inches) Valve Option Inlet 36L Stainless Steel 2 Outlet 36L Stainless Steel 3 No Valve 4 Inlet PVC 5 Outlet PVC 6 Inlet PVDF 7 Outlet PVDF 8 Inlet Hastelloy C 9 Outlet Hastelloy C Scale Length 65mm 50mm A* B C D E F G *The FNPT fittings have a 3/4 6 O.D. thread with mounting nuts installed. 0 Optional Alarm Switch 0 No Alarm Fiber Optic NPN (Proximity) 2 Fiber Optic PNP (Proximity) 3 Inductive Ring Sensor (Proximity) 4 Inductive Ring Sensor (Latching) WARNING USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems. Offer of Sale The items described in this document are hereby offered for sale by Parker-Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the detailed Offer of Sale elsewhere in this document or available at Parker Hannifin Corporation FM-59, Rev 0 April 200

9 P20 Series Glass Tube Variable Area Flowmeter The P20 Series Flowmeters are designed for low flow rates of both liquids and gases. They cover a broad range of applications, from purging to monitoring of industrial processes. The P20 Series offers 36 Stainless Steel construction for all wetted parts. For challenging corrosive applications, the P20 offers PTFE seals as an option. Contact Information: Parker Hannifin Corporation Porter Instrument Division 245 Township Line Road Hatfield PA, 9440 Phone Fax industrial@parker.com Product Features: Ideal for general purpose use, as well as use for field test equipment Suitable for both liquids and gases 36 Stainless Steel construction for all wetted parts PTFE seals are available as an option Front panel mounting hardware Easy-to-read scale Scale tube length of 45mm Optional alarm output

10 Specification Materials Wetted Body 36 Stainless Steel Tapered Tube Heat-resistant Glass Float 36 Stainless Steel, Glass, PTFE or Ruby NBR(Nitrile Rubber) Optional: Packing FPM(Fluorinated Propylene Monomer) CR(Neoprene) PTFE( Polytetrafluoroethylene) Fitting 36 Stainless Steel Valve 36 Stainless Steel Non-wetted Cover Polycarbonate Support Aluminum Connection NPT or RC /4 With locknuts for Size and Type front panel mounting Proper material to be selected according to the specification. Performance Flowrate Scale Ranges Water Minimum Gal/h (0.3 3 L/h) Maximum Gal/h (24 20 L/h) Air 2 Minimum ft 3 /h (0.2.2 L/h) (nor) Maximum 06 ft 3 /h ( L/h) (nor) Turndown 0: Accuracy ±5% F.S. Approximate Weight. lbs. (0.5 kg) Flow Direction Bottom Rear to Top Rear Alarm Type Self-holding Reed Switch Operating Conditions 6 psig (8 barg) (72.5 psig) (5 barg) when Max. Operating Pressure PTFE packing material is used Max. Operating Temperature NBR(Nitrile Rubber) 76 F (80 C) CR(Neoprene) PTFE(Polytetrafluoroethylene) FPM(Fluorinated Propylene 248 F (20 C) Monomer) Liquid equivalent to water density.0g/cm 3, viscosity.0cp 2 Gases equivalent to 0 C atm Reed Switch Specification point(high or Low) Number Of Point 2 point alarm also avaiable as an option. Consult factory for details. Alarm Setting Range Standard 20 to 80% of full scale(h:50 to 80%, L:20 to 50%) Reed switch(self-holding type) Max. Contact capacity: AC0VA, DC0W Contact Max. Voltage: AC25V, DC00V Max. Current: 0.5A Connection Lead wire connection of 50cm. (2m is also available) Reset-Span 25% Full Scale Ambient Temperature -0 to 60 C Caution must be taken when mounting multiple alarmed meters. Close proximity may cause interference with alarm signal.

11 Dimensional Drawing Standard Valve provided at outlet, with locknuts for front panel mounting (.2 in (30 mm)) (Max.4 in (36 mm)).4 in 0.7 in (35 mm) (9 mm) 2 NPT /4 2 ø 0.8 in (20 mm) OUT (5.5 in (40 mm)) 2 M8 4.5 in (5 mm) 4.5 in (5 mm) IN Panel Cut Dimensions Connection Size Hole Diameter in mm /4 NPT or RC ø 0.8 ø 20 Panel Max t 0 PANEL CUT /8 NPT or RC ø 0.6 ø 6 Use non-magnetized material for panel with Reed Switch alarm output Flow Range Alarm Settings Air Flow Rate Table If LO, LC, HO, or HC Alarm Output Air Alarm Setting Range ft 3 /h L/h (nor) ft 3 /h L/h (nor) ** ** Water 2 Flow Rate Table If LO, LC, HO, or HC alarm output Water Alarm Setting Range Gal/h L/h Gal/h L/h Water measured with viscosity of mpa s *0:2 if range is more than 6 Gal/h (60 L/h) Air measured at 0 psig and 32 F (0 C) When PTFE is used, a flowmeter with a valve cannot be manufactured for a flow rate less than 2. ft 3 /h (60 L/h) (nor). *0:2 if range is less than 0.2 ft 3 /h (6 L/h) (nor) **0:2 if range is more than 2 ft 3 /h (600 L/h) (nor)

12 Part Number Selection Model: P2 Application Information: Flow / Direction 2 3 Bottom rear to top rear Air flow rates >8 L/hr up to 200 L/hr Water flow rates from L/hr to L/hr Bottom rear to top rear Air flow rates < 8 L/hr Bottom rear to top rear Air flow rates >200 L/hr up to 3000 L/hr Fluid Name: Operating Density or Specific Gravity: Viscosity: Valve A B C None Bottom Top Operating Or Normal: Flowrate Alarm Output None Reed Switch - Contact closes (becomes ON) when 2 value is more than set point Reed Switch - Contact opens (becomes OFF) when 3 value is more than set point Reed Switch - Contact closes (becomes ON) when 4 value is less than set point Reed Switch - Contact opens (becomes OFF) when 5 value is less than set point Scale Range: Operating or Normal: Pressure Wetted Parts A 36 Stainless Steel (Standard) Temperature Packing Material Fluorinated Propylene Monomer (FPM/FKM) 2 Nitrile (NBR) 3 Neoprene (CR) 4 Polytetrafluoroethylene (PTFE) Operating or Normal: Connection Type A B NPT thread (standard) RC thread (Typical for Non-USA Market) Alarm Settings Connection Size /8 2 /4 Alarm : Alarm 2: Mounting Options A None (Standard with locknuts for front panel mounting) Other Options Example: P2 A A A A Liquid equivalent to water density.0g/cm 3, viscosity.0cp Gases equivalent to 0 C atm WARNING USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems. Offer of Sale The items described in this document are hereby offered for sale by Parker-Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the detailed Offer of Sale elsewhere in this document or available at 20 Parker Hannifin Corporation FM-90, Rev 0 July 20

13 P220 Series Glass Tube Variable Area Flowmeter The P220 Series Flowmeters are designed for low flow rates of both liquids and gases. The P220 Series covers a broad range of applications, from purging to monitoring of industrial processes. The P220 offers 36 Stainless Steel construction for all wetted parts. For challenging corrosive applications, the P220 offers PTFE seals as an option. Contact Information: Parker Hannifin Corporation Porter Instrument Division 245 Township Line Road Hatfield PA, 9440 Phone Fax industrial@parker.com Product Features: Ideal for general purpose use, as well as use for field test equipment Suitable for both liquids and gases 36 Stainless Steel construction for challenging corrosive applications Front panel mounting hardware Easy-to-read scale Scale tube length of 00mm Optional alarm output

14 Specification Materials Body Tapered Tube Float Packing Fitting Valve Cover Support Connection Size and Type Wetted 36 Stainless Steel Heat-resistant Glass 36 Stainless Steel, Glass, PTFE or Ruby NBR (Nitrile Rubber) Optional: FPM (Fluorinated Propylene Monomer) CR (Neoprene) 36 Stainless Steel 36 Stainless Steel Non-wetted Polycarbonate Aluminum NPT or RC /4 With locknuts for front panel mounting Proper material to be selected according to the specification. Performance Flowrate Scale Ranges Water Minimum Gal/h (0.3 3 L/h) Maximum Gal/h (24 20 L/h) Air 2 Minimum ft 3 /h (0.3 3 L/h) (nor) Maximum 3 27 ft 3 /h ( L/h) (nor) Turndown 0: Accuracy ±3% F.S. Approximate Weight.3 lbs. (0.6 kg) Flow Direction Bottom Rear to Top Rear Alarm Type Max. Operating Pressure Max. Operating Temperature NBR (Nitrile Rubber) CR (Neoprene) Operating Conditions Self-holding Reed Switch 6 psig (8 barg) 76 F (80 C) FPM (Fluorinated Propylene Monomer) 248 F (20 C) Liquid equivalent to water density.0g/cm 3, viscosity.0cp 2 Gases equivalent to 0 C atm Reed Switch Specification point(high or Low) Number Of Point 2 point alarm also available as an option. Consult factory for details. Alarm Setting Range Standard 20 to 80% of full scale(h:50 to 80%, L:20 to 50%) Reed switch(self-holding type) Max. Contact capacity: AC0VA, DC0W Contact Max. Voltage: AC25V, DC00V Max. Current: 0.5A Connection Lead wire connection of 50cm. (2m is also available) Reset-Span 25% Full Scale Ambient Temperature -0 to 60 C Caution must be taken when mounting multiple alarmed meters. Close proximity may cause interference with alarm signal.

15 Dimensional Drawing Standard Valve provided at outlet, with locknuts for front panel mounting (.2 in (30 mm)) (Max.4 in (36 mm)).4 in 0.7 in (35 mm) (9 mm) 2 NPT /4 2 ø 0.8 in (20 mm) OUT (8.9 in (225 mm)) 7.9 in (200 mm) 2 M8 7.9 in (200 mm) IN Panel Max t 0 PANEL CUT Panel Cut Dimensions Hole Diameter Connection Size in mm /4 NPT or RC ø 0.8 ø 20 /8 NPT or RC ø 0.6 ø 6 Use non-magnetized material for panel with Reed Switch alarm output Flow Range Alarm Settings Air Flow Rate Table Water 2 Flow Rate Table If LO, LC, HO, or HC alarm output If LO, LC, HO, or HC alarm output Air Alarm Setting Range Water Alarm Setting Range ft 3 /h L/h (nor) ft 3 /h L/h (nor) Gal/h L/h Gal/h L/h Water measured with viscosity of mpa s * * Air measured at 0 psig and 32 F (0 C) *0:2 if range is more than 85 ft 3 /h (nor) (2400 L/h) (nor)

16 Part Number Selection Model: P22 Application Information: Flow / Direction 2 Bottom rear to top rear Gas flow rates >30 L/hr up to 3600 L/hr All Liquids ranges from L/hr to 2-20 L/hr Bottom rear to top rear Gas flow rates < 30 L/hr Fluid Name: Operating Density or Specific Gravity: Viscosity: Valve A B C None Bottom Top Flowrate Alarm Output None Reed Switch - Contact closes (becomes ON) when value 2 is more than set point Reed Switch - Contact opens (becomes OFF) when 3 value is more than set point Reed Switch - Contact closes (becomes ON) when value 4 is less than set point Reed Switch - Contact opens (becomes OFF) when 5 value is less than set point Operating Or Normal: Scale Range: Pressure Wetted Parts A 36 Stainless Steel (Standard) Operating or Normal: Packing Material Fluorinated Propylene Monomer (FPM/FKM) 2 Nitrile (NBR) 3 Neoprene (CR) A NPT thread (standard) Temperature Operating or Normal: Connection Type B RC thread (Typical for Non-USA Market) Connection Size /8 2 /4 Alarm : Alarm Settings Mounting Options A None (Standard with locknuts for front panel mounting) Alarm 2: Example: 22 A A A A Other Options Liquid equivalent to water density.0g/cm 3, viscosity.0cp Gases equivalent to 0 C atm WARNING USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems. Offer of Sale The items described in this document are hereby offered for sale by Parker-Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the detailed Offer of Sale elsewhere in this document or available at 20 Parker Hannifin Corporation FM-9, Rev 0 July 20

17 P230 Series Glass Tube Variable Area Flowmeter The P-230 Series Flowmeters are highly reliable and accurate flowmeters commonly used in industrial production processes. They feature SCS4 (Equivalent to 36 SS) construction for use with many types of corrosive gases and liquids, making them optimal for demanding industrial applications. They are available in a variety of operating flow ranges. Contact Information: Parker Hannifin Corporation Porter Instrument Division 245 Township Line Road Hatfield PA, 9440 Phone Fax industrial@parker.com Product Features: Standard construction utilizes SCS4 (Equivalent to 36 SS) wetted parts for use in most any application including corrosive applications Industry standard lay lengths for 65mm and 50mm scales CR (Neoprene) packing material available for ammonia gas

18 Specification Materials Body Tapered Tube Float Packing Spindle Fitting Valve Cover Mounting Board Connection Size and Type Wetted SCS4 (Equivalent to 36 SS) Heat-resistant Glass 36 Stainless Steel, Glass, PTFE or Ruby FPM (Fluorinated Propylene Monomer) Optional: CR (Neoprene) 36 Stainless Steel 36 Stainless Steel 36 Stainless Steel Non-wetted Acrylic SPCC (Cold Rolled Carbon Steel Sheets) NPT or RC /4 With locknuts for front panel mounting Proper material to be selected according to the specification. Performance Flowrate Scale Ranges Water Gal/h Minimum (0.3 3 L/h) Gal/h Maximum (24 20 L/h) Air ft 3 /h Minimum (0.2.2 L/h) (nor) ft 3 /h Maximum ( L/h) (nor) Turndown 0: ±5% F.S. for 65mm Tube Accuracy ±3% F.S. for 50mm Tube Approximate Weight.3 lbs. (0.5 kg) Flow Direction Bottom to Top Operating Conditions Max. Operating Pressure 6 psig (8 barg) Max. Operating Temperature CR (Neoprene) 76 F (80 C) FPM (Fluorinated Propylene 248 F (20 C) Monomer) Liquid equivalent to water density.0g/cm 3, viscosity.0cp 2 Gases equivalent to 0 C atm Standard Flow Capacity Ranges Air Flow Rate Table Air ft 3 /h L/h (nor) * 0.6 6* *** *** ** ** Water 2 Flow Rate Table Water Gal/h L/h * 8 90* Liquid equivalent to water density.0g/cm 3, viscosity.0 cp *0:2 if range is more than 24 Gal/h (90 L/h) ** 0:2 if range is more than 6 Gal/h (60 L/h) Air measured at 0 psig and 32 F (0 C) *0:2 if range is less than 0.2 ft 3 /h (6 L/h) (nor) **0:2 if range is more than 64 ft 3 /h (800 L/h) (nor) ***0:2 if range is more than 2 ft 3 /h (600 L/h) (nor)

19 Part Number Selection Model: P23 Flow/Direction Valve Alarm Output Wetted Parts Packing Material Connection Type Connection Size Mounting Options 65 mm Size Range Direction Air: L/hr up to L/hr Water: L/hr up to L/hr 2 50 mm Air: L/hr up to L/hr Water: L/hr up to L/hr A None B Precision Valve - Bottom C Precision Valve - Top D Standard Valve - Bottom E Standard Valve - Top None B SCS4 (Equivalent to 36 SS) Fluorinated Propylene Monomer (FPM/FKM) 3 Neoprene (CR) A NPT thread (standard) B RC thread (Typical for Non-USA Market) 2 /4 A None (Standard with locknuts for front panel mounting) Bottom Rear to Top Rear (Standard) Bottom Rear to Top Rear (Standard) Example: P23 A B A 2 A Liquid equivalent to water density.0g/cm 3, viscosity.0cp Gases equivalent to 0 C atm Required Information: Fluid Name: Operating Density or Specific Gravity: Viscosity: Flowrate Operating Or Normal: Scale Range: Operating or Normal: Pressure Operating or Normal: Temperature Alarm : Alarm 2: Alarm Settings

20 Dimensional Drawing Standard NPT /4 connection, needle valve provided at inlet, locknuts for front panel mounting 65 MM 50 MM OUT OUT 5.6 in (43 mm) 4.5 in (5 mm) 4.5 in (5 mm) 9.9 in (252 mm) 8.8 in (224 mm) 8.8 in (224 mm) 2 Ø d 2 Ø d IN IN.2 in (3 mm) (Max.2 in (3 mm)). in (28 mm) (L) 2 NPT /4 2 M20 Panel Cut PANEL CUT.2 in (3 mm) (Max.2 in (3 mm)). in (28 mm) (L) 2 NPT /4 Panel Cut PANEL CUT 2 M20 Hole Diameter (d) Rear Length (L) Connection Size in mm in mm NPT / WARNING USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems. Offer of Sale The items described in this document are hereby offered for sale by Parker-Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the detailed Offer of Sale elsewhere in this document or available at 20 Parker Hannifin Corporation FM-92, Rev 0 July 20

21 P240 Series Glass Tube Variable Area Flowmeter The P240 Series Flowmeters are designed to extend the flow capacity of a traditional purgemeter given an outstanding performance for a wide range of liquids and gases. The SCS4 (Equivalent to 36 SS) construction allows for usage with many types of corrosive gases and liquids making it optimal for demanding industrial applications. Contact Information: Parker Hannifin Corporation Porter Instrument Division 245 Township Line Road Hatfield PA, 9440 Phone Fax industrial@parker.com Product Features: Ideal for general purpose use, as well as use for industrial process applications SCS4 (Equivalent to 36 SS) construction for challenging corrosive applications Front panel mounting hardware Easy-to-read scale Suitable for both liquids and gases Optional alarm output

22 Specification Materials Body Tapered Tube Float Packing Spindle Valve Mounting Board Cover Connection Type and Size Wetted SCS4 (Equivalent to 36 SS) Heat-resistant Glass 304 Stainless Steel and PTFE (36 Stainless Steel available) NBR(Nitrile Rubber) Optional: FPM(Fluorinated Propylene Monomer) CR(Neoprene) EPDM(Ethylene Propylene Diene Monomer) 304 Stainless Steel 304 Stainless Steel Non-wetted SPCC(Cold Rolled Carbon Steel Sheets and Strip) Optional: (304 Stainless Steel available) Consult Factory for details Acrylic NPT or RC 3/8 With locknuts for front panel mounting Performance Water Minimum Maximum Liquid equivalent to water density.0g/cm 3, viscosity.0cp 2 Gases equivalent to 0 C atm Flowrate Scale Ranges.6 6 Gal/h (6 60 L/h) Gal/h ( L/h) Air 2 Minimum ft 3 /h ( L/h) (nor) Maximum ft 3 /h ( L/h) (nor) Turndown 0: Accuracy ±5% F.S. Approximate Weight Alarm Type Max. Operating Pressure Operating Conditions Max. Operating Temperature NBR(Nitrile Rubber) CR(Neoprene) EPDM(Ethylene Propylene Diene Monomer) FPM(Fluorinated Propylene Monomer) 4.4 lbs. (2 kg) Self-holding Reed Switch 6 psig (8 barg) 76 F (80 C) 248 F (20 C) Proper material to be selected according to the specification. Reed Switch Specification point(high or Low) Number Of Point 2 point alarm also available as an option. Consult factory for details. Alarm Setting Range Standard 20 to 80% of full scale(h:50 to 80%, L:20 to 50%) Reed switch(self-holding type) Max. Contact capacity: AC0VA, DC0W Contact Max. Voltage: AC25V, DC00V Max. Current: 0.5A Connection Lead wire connection of 50cm. (2m is also available) Reset-Span 25% Full Scale Ambient Temperature -0 to 60 C Caution must be taken when mounting multiple alarmed meters. Close proximity may cause interference with alarm signal.

23 W Dimensional Drawing Standard Valve provided at outlet, panel front thread (M3) mounting type (9.2 in (234 mm)) (2. in (54 mm)) (Max.7 in.8 in (42 mm)) (45 mm) 2 NPT 3/8 7.9 in (200 mm) OUT IN. in (2929 mm) 2 ø. in (28 2-φ28 mm) φ4 ø 0.2 in (4 mm) in (55 mm) 7.9 in (200 mm) (0.9 in (22.5 mm)) (0.9 in (22.5 mm)) Panel Front Installation Valve provided at outlet, Standard with locknuts for front panel mounting (9.2 in (234 mm)) (2. in (54 mm)) (Max.7 in.8 in (42 mm)) (45 mm) L 7.9 in (200 mm) Panel Max t 0 2 M26 2 ø d OUT IN 7.9 in (200 mm) 0.5 in (3.5 mm) 0.5 in (3.5 mm) Bezel Valve provided at outlet, bezel installation, mounting option code C 2 ø 0.2 in (5 mm) Bezel. in (Board thickness 0. in (3 mm)) (29 mm) 4 ø 0.2 in (6 mm) 0.9 in (22.5 mm) 6. in (55 mm) 5 in (28 mm) ø. in (27 mm) Max.7 in (43 mm) 9.4 in (240 mm) 4.9 in (24 mm) id th ( 4 0 ) Width (.6 in (40mm)) (9.2 in (234 mm)) Panel (Board thickness) 2 NPT 3/8 7.9 in (200 mm) OUT IN PANEL CUT Connection Size Rear Length (L) Hole Dia. ø in mm in mm in mm NPT 3/ NPT 3/8 PANEL CUT 2.4 in (2. in (Max.7 in.8 in Flow Range Alarm Settings Water Flow Rate Table If LO, LC, HO, or HC alarm output Water Alarm Setting Range Gal/h L/h Gal/h L/h * 2 20* ** ** Liquid equivalent to water density.0g/cm 3, viscosity.0cp *Float material should be PVC. **Available for viscosity cp only Air 2 Flow Rate Table If LO, LC, HO, or HC Alarm Output Air Alarm Setting Range ft 3 /h L/h (nor) ft 3 /h L/h (nor) 06* * Air measured at 0 psig and 32 F (0 C *Float material should be PVC.

24 Part Number Selection Model: P24 Required Information: Bottom rear to top rear (standard) Air flow rates from L/hr up to L/hr Water flow rates from 6-60 L/hr up to L/hr Fluid Name: Operating Density or Specific Gravity: Flow / Direction 2 Bottom to top Air flow rates from L/hr up to L/hr Water flow rates from 6-60 L/hr up to L/hr Viscosity: A None Flowrate Valve B C Bottom Top Alarm Output None Reed Switch - Contact closes (becomes ON) when value 2 is more than set point Reed Switch - Contact opens (becomes OFF) when value 3 is more than set point Reed Switch - Contact closes (becomes ON) when value 4 is less than set point Reed Switch - Contact opens (becomes OFF) when value 5 is less than set point Operating Or Normal: Scale Range: Pressure Operating or Normal: Wetted Parts Packing Material B SCS4 (Equivalent to 36 SS) Fluorinated Propylene Monomer (FPM/FKM) 2 Nitrile (NBR) 3 Neoprene (CR) 5 Ethylene Propylene Diene Monomer (EPDM) Temperature Operating or Normal: A NPT thread (Standard) Connection Type Connection Size B RC thread (Typical for Non-USA Market) 3 3/8 (Standard) 4 /2 (Not available for RC thread connection type) 5 3/4 6 A None (Standard with locknuts for front panel mounting) Alarm : Alarm 2: Alarm Settings Other Options Mounting Options B C Panel Rear Installation Bezel Installation Example: P24 A B A 3 A Liquid equivalent to water density.0g/cm 3, viscosity.0 cp Gases equivalent to 0 C atm WARNING USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems. Offer of Sale The items described in this document are hereby offered for sale by Parker-Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the detailed Offer of Sale elsewhere in this document or available at 20 Parker Hannifin Corporation FM-93, Rev 0 July 20

25 P250 Series Glass Tube Variable Area Flowmeter The P250 Series Flowmeters are designed to extend the flow capacity of a traditional purgemeter given an outstanding performance for a wide range of water applications. All wetted materials are constructed of SCS4 (Equivalent to 36 SS). Laser engraved graduations and a magnifying lens provides users with a quick, precise, easy and accurate reading of the flow measurement scale. Contact Information: Parker Hannifin Corporation Porter Instrument Division 245 Township Line Road Hatfield PA, 9440 Phone Fax industrial@parker.com Product Features: Ideal for general purpose use, as well as use for industrial process applications SCS4 (Equivalent to 36 SS) construction for challenging corrosive applications Front panel mounting hardware Easy-to-read scale Designed for accurate flow measurement of water applications

26 Specification Materials Body Tapered Tube Float Packing Spindle Valve Support Connection Size and Type Wetted SCS4 (Equivalent to 36 SS) Heat-resistant Glass 36 Stainless Steel NBR (Nitrile Rubber) Optional: FPM (Fluorinated Propylene Monomer) 36 Stainless Steel 36 Stainless Steel Non-wetted 304 Stainless Steel NPT or RC 3/8 With locknuts for front panel mounting Performance Scale Range (water) Water.6-6 Gal/h Minimum (6-60 L/h) Gal/h Maximum ( L/h) Turndown 0: Accuracy ±5% F.S. Approximate Weight 4 lbs. (2 kg) Operating Conditions Max. Operating Pressure 6 psig (8 barg) Max. Operating Temperature NBR (Nitrile Rubber) 76 F (80 C) FPM (Fluorinated Propylene 248 F (20 C)* Monomer) Liquid equivalent to water density.0g/cm 3, viscosity.0cp *Maximum 80 C in case of water Proper material to be selected according to the specification. Dimensional Drawing Standard Type Valve Provided at Outlet, Panel Front Thread (2. in (54 mm)) (Max.7 in (42 mm)).8 in (45 mm) 2 NPT 3/8 PANEL CUT 2 ø 0.3 in 2- (828 mm) (0.9 in (22.5 mm)) OUT (22.5) ø (9.2 in (234 mm)) 7.9 in (200 mm) IN. in (29 mm) (22.5) 6. in (55mm) in (200 mm) Panel Cut Dimensions Hole Diameter Rear Diameter Connection in mm in mm (0.9 in (22.5 mm)) NPT 3/8 ø. ø 28 26

27 Part Number Selection Model: P25 Flow / Direction Valve Alarm Output Wetted Parts Packing Material Connection Type Connection Size Mounting Options A B C Bottom rear to top rear (standard) Water flow rates from 6-60 L/hr up to L/hr None Bottom Top None B SCS4 (Equivalent to 36 SS) Fluorinated Propylene Monomer (FPM/FKM) 2 Nitrile (NBR) A NPT thread (standard) B RC thread (Typical for Non-USA Market) 3 3/8 (Standard) 4 /2 A None (Standard with locknuts for front panel mounting) Example: P25 A B A 3 A Water density.0g/cm 3, viscosity.0cp Required Information: Fluid Name: Operating Density or Specific Gravity: Viscosity: Flowrate Operating Or Normal: Scale Range: Operating or Normal: Pressure Operating or Normal: Temperature Alarm : Alarm 2: Alarm Settings

28 WARNING USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems. Offer of Sale The items described in this document are hereby offered for sale by Parker-Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the detailed Offer of Sale elsewhere in this document or available at 20 Parker Hannifin Corporation FM-94, Rev 0 July 20

29 P260 Series Glass Tube Variable Area Flowmeter The P260 Series Flowmeters are optimized for measuring low flow rates of water, air, and nitrogen, making it ideal for OEM applications. Laser engraved graduations and a magnifying lens provides users with a quick, precise, easy and accurate reading of the flow measurement scale. Contact Information: Parker Hannifin Corporation Porter Instrument Division 245 Township Line Road Hatfield PA, 9440 Phone Fax industrial@parker.com Product Features: Valve can be placed in bottom or top position Laser engraved graduations and magnifying lens make reading flow measurement scale quick and easy Ideal for OEM applications Standard ranges for N2, Air and Water

30 Specification Materials Body Tapered Tube Float Packing Support Front Panel Scale Panel Connection Size and Type Wetted SCS4 (Equivalent to 36 SS) Heat-resistant Glass 304 Stainless Steel, Glass, PTFE or Ruby NBR(Nitrile Rubber) Optional: FPM (Fluorinated Propylene Monomer) Non-wetted 6063-T5 Aluminum Acrylonitrile Butadiene Styrene (ABS) Polycarbonate NPT or RC /4 With locknuts for front panel mounting Proper material to be selected according to the specification. Performace Flowrate Scale Ranges Water Minimum Gal/h (0.3 3 L/h) Maximum Gal/h (24 20 L/h) Air 2 Minimum ft 3 /h (6-60 L/h) (nor) Maximum 06 ft 3 /h ( L/h) (nor) Turndown 0: Accuracy ±5% F.S. Approximate Weight. lbs. (0.5 kg) Flow Direction Bottom Rear to Top Rear Operating Conditions Max. Operating Pressure 6 psig (8 barg) Max. Operating Temperature NBR (Nitrile Rubber) 76 F (80 C) FPM (Fluorinated Propylene Monomer) 248 F (20 C) Liquid equivalent to water density.0g/cm 3, viscosity.0cp 2 Gases equivalent to 0 C atm Dimensional Drawing Standard Type Valve Provided at Outlet (.3 in (30 mm)) Max in (26 mm) (.2 in 0.7 in (3 mm)) (7 mm) PANEL CUT 2 ø 0.8 in (20 mm) d 2 NPT /4 OUT 2 D2 M8 (5.5 in (40 mm)) 4.5 in (5 mm) 4.5 in (5 5 mm) IN

31 Standard Flow Capacity Ranges Flow Rate Table Water Air 2 Gal/h L/h ft 3 /h L/h (nor) Liquid equivalent to water density.0g/cm 3, viscosity.0cp 2 Gases equivalent to 0 C atm Part Number Selection Model: P26 Required Information: Flow / Direction Valve Alarm Output Wetted Parts Packing Material Connection Type Connection Size Mounting Options A B C Example: P26 A B A 2 A Liquid equivalent to water density.0g/cm 3, viscosity.0cp Gases equivalent to 0 C atm Bottom rear to top rear (standard) Air flow rates from 6-60 L/hr up to L/hr Water flow rates from L/hr up to L/hr None Bottom Top None B SCS4 (Equivalent to 36 SS) Fluorinated Propylene Monomer (FPM/FKM) 2 Nitrile (NBR) A NPT thread (standard) B RC thread (Typical for Non-USA Market) 2 /4 (Standard) None (Standard with locknuts for front panel A mounting) Fluid Name: Operating Density or Specific Gravity: Viscosity: Flowrate Operating Or Normal: Scale Range: Pressure Operating or Normal: Temperature Operating or Normal: Alarm Settings Alarm : Alarm 2: Other Options