Sýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015

Size: px
Start display at page:

Download "Sýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015"

Transcription

1 ÍST EN 15224:2016 Gildistaka ICS: 3.12 Health care services - Quality management systems - Requirements based on EN ISO 9001:2015 Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda

2 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM FINAL DRAFT FprEN April 2012 ICS ; Will supersede CEN/TS 15224:2005 English Version Health care services - Quality management systems - Requirements based on EN ISO 9001:2008 Services de santé - Systèmes de management de la qualité - Exigences selon l'en ISO 9001:2008 Dienstleistungen in der Gesundheitsversorgung - Qualitätsmanagementsysteme - Anforderungen nach EN ISO 9001:2008 This draft European Standard is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee CEN/TC 362. If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation. Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 15224:2012: E

3 Contents Page Foreword...5 Introduction Quality in health care General The concept of "health" Health care Quality in health care The concept of "clinical" Clinical risk Health care specific preconditions Process approach General Process approach and improvements Compatibility with other standards Scope General Application Normative references Terms and definitions Quality management systems General requirements Documentation requirements General Quality manual Control of documents Control of records Management responsibility Management commitment Customer focus Quality policy Planning Quality objectives Quality management system planning Responsibility, authority and communication Responsibility and authority Management representative Internal communication Management review General Review input Review output Resource management Provision of resources Human resources General Competence, awareness and training Infrastructure Work environment Product (health care service) realization

4 7.1 Planning of product (health care service) realization Customer-related processes Determination of requirements related to the product (health care service) Review of requirements related to the product (health care service) Customer communication Design and development Design and development planning Design and development inputs Design and development outputs Design and development review Design and development verification Design and development validation Control of design and development changes Purchasing Purchasing process Purchasing information Verification of purchased service/product Production and service provision Control of production and service provision Validation of processes for production and service provision Identification and traceability Customer property Preservation of product Control of monitoring and measuring equipment Measurement, analysis and improvement General Monitoring and measurement Customer satisfaction Internal audit Monitoring and measurement of processes Monitoring and measurement of product (health care service) Control of non-conforming product (health care service) Analysis of data Improvement Continual improvement Corrective action Preventive action Annex A (informative) Correspondence between ISO 9001:2008 and EN Annex B (informative) Practical guide for the implementation of this standard in health care organizations B.1 General B.2 Preparation and planning B.2.1 General B.2.2 Leadership of quality B.2.3 Planning the quality management system set-up B.2.4 Education and training for quality B.2.5 Customer focus B.2.6 Planning the documentation B.2.7 Provision of necessary resources B.3 Implementing the quality management system B.3.1 General B.3.2 Quality policy B.3.3 Quality characteristics and quality requirements in health care B.3.4 Quality objectives B.3.5 Personnel working for and on behalf of the organization B.3.6 Authority, responsibility and accountability B.3.7 Communication and information management B.3.8 Documenting the quality management system B.3.9 Process-oriented quality management

5 B.4 Establishing the monitoring and evaluation system B.4.1 General B.4.2 Risk management B.5 Continual improvement B.5.1 General B.5.2 Analysis of collected data B.5.3 Management reviews B.5.4 Corrective action Annex C (informative) Correspondence between CEN/TS 15224:2005 and EN Bibliography

6 Foreword This document (FprEN 15224:2012) has been prepared by Technical Committee CEN/TC 362, "Health services -Quality management systems, the secretariat of which is held by SIS. This document is currently submitted to the Formal Vote. This document will supersede CEN/TS 15224:

Sýnishorn Maintenance - Qualification of maintenance personnel

Sýnishorn Maintenance - Qualification of maintenance personnel ÍST EN 15628:2014 Gildistaka 20.11.2014 ICS: 3.08 Maintenance - Qualification of maintenance personnel Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD

More information

ÍST EN :2015. Gildistaka ICS: 53.06

ÍST EN :2015. Gildistaka ICS: 53.06 ÍST EN 1459-3:2015 Gildistaka 15.11.2015 ICS: 53.06 Rough-terrain trucks - Safety requirements and verification - Part 3: Additional requirements for variable reach trucks fitted with elevating work platform

More information

Sýnishorn Specifications for patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment

Sýnishorn Specifications for patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment ÍST EN 1865-1:2010+A1:2015 Gildistaka 15.11.2015 ICS: 11.16 Forskriftir fyrir sjúkraflutningabúnað til nota í sjúkrabifreiðum - Hluti 1: Almenn sjúkrabörukerfi og sjúkraflutningabúnaður Specifications

More information

Sýnishorn Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics

Sýnishorn Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics ÍST EN 14885:2015 Gildistaka 15.12.2015 ICS: 71.1 Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics Staðfestur af Staðlaráði Íslands

More information

Sýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity

Sýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity FprEN 1279-5 Umsagnarfrestur til 8.2.2018 ICS: 81.04 Gler í byggingar - Einangrunargler - Hluti 5: Samræmismat Glass in building - Insulating glass units - Part 5: Evaluation of conformity Staðfestur af

More information

Sýnishorn Windows and doors - Watertightness - Test method

Sýnishorn Windows and doors - Watertightness - Test method ÍST EN 1027:2016 Gildistaka 25.9.2016 ICS: 91.06 Windows and doors - Watertightness - Test method Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD

More information

Sýnishorn Safety of woodworking machines - One side thickness planing machines

Sýnishorn Safety of woodworking machines - One side thickness planing machines EN 860:2007+A2:2012 Umsagnarfrestur til 15.4.2012 ICS: 79.12 Öryggi trésmíðavéla - Þykktarheflar til vinnslu á einni hlið Safety of woodworking machines - One side thickness planing machines Staðfestur

More information

Sýnishorn Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking

Sýnishorn Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking ÍST EN 14387:2004+A1:2008 Gildistaka 1.5.2008 ICS: 13.34 Öndunarfærahlífar - Gassíur og samsettar síur - Kröfur, prófun, merking Respiratory protective devices - Gas filter(s) and combined filter(s) -

More information

Sýnishorn Power installations exceeding 1 kv a.c. - Part 1: Common rules

Sýnishorn Power installations exceeding 1 kv a.c. - Part 1: Common rules ÍST EN 61936-1:2010 Gildistaka 25.2.2011 ICS: 29.02 Tók við af ÍST 170:2005, sjá einnig ÍST EN 50522:2010 Power installations exceeding 1 kv a.c. - Part 1: Common rules Staðfestur af Staðlaráði Íslands

More information

Sýnishorn Specification for mortar for masonry - Part 2: Masonry mortar

Sýnishorn Specification for mortar for masonry - Part 2: Masonry mortar ÍST EN 998-2:2016 Gildistaka 15.2.2017 ICS: 91.1 Kröfur til múrs til nota í múrvirki - Hluti 2: Múr til nota í múrvirki Specification for mortar for masonry - Part 2: Masonry mortar Staðfestur af Staðlaráði

More information

Sýnishorn Safety of machinery - Permanent means of access to machinesry - Part 3: Stairs, stepladders and guard-rails

Sýnishorn Safety of machinery - Permanent means of access to machinesry - Part 3: Stairs, stepladders and guard-rails ÍST EN ISO 14122-3:2016 Gildistaka 20.11.2016 ICS: 13.11 Öryggi véla - Varanlegar aðgönguleiðir að vélum - Hluti 3: Stigar, klifurstigar og handrið Safety of machinery - Permanent means of access to machinesry

More information

Sýnishorn General requirements for components used in drains and sewers

Sýnishorn General requirements for components used in drains and sewers ÍST EN 476:2011 Gildistaka 1.6.2011 ICS: 93.03 General requirements for components used in drains and sewers Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN

More information

Sýnishorn Ventilation in hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals

Sýnishorn Ventilation in hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals ÍSLENSKIR STAÐLAR CEN/TS 16244:2018 Gildistaka 15.5.2018 ICS: 91.04 Ventilation in hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals

More information

Sýnishorn Fire resistance test for service installations - Part 1: Ventilation ducts

Sýnishorn Fire resistance test for service installations - Part 1: Ventilation ducts ÍST EN 1366-1:2014 Gildistaka 1.2.2015 ICS: 13.22 Eldþolsprófanir fyrir þjónustustöðvar - Hluti 1: Loftræstistokkar Fire resistance test for service installations - Part 1: Ventilation ducts Staðfestur

More information

ÍST EN :2013. Gildistaka ICS: 75.2

ÍST EN :2013. Gildistaka ICS: 75.2 ÍST EN 14678-3:2013 Gildistaka 1.5.2013 ICS: 75.2 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at private

More information

Sýnishorn Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item

Sýnishorn Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item ÍST EN 13823:2010+A1:2014 Gildistaka 1.3.2015 ICS: 13.22 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item Staðfestur

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16819 October 2015 ICS 03.240 English Version Postal services - Parcel boxes for end use - Technical features Services postaux

More information

Sýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity

Sýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity ÍST EN 1279-5:2005+A2:2010 Fellur úr gildi 15.11.2010 ICS: 81.04 Gler í byggingar - Einangrunargler - 5. hluti: Samræmismat Glass in building - Insulating glass units - Part 5: Evaluation of conformity

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-29889-0 Edition 1 EN 572-6:2012 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass This national standard is

More information

Sýnishorn Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/product standard

Sýnishorn Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/product standard ÍST EN 14449:2005 Gildistaka 30.11.2005 ICS: 81.04 Gler í byggingar - Lagskipt gler og lagskipt öryggisgler - Samræmismat/vörustaðall Glass in building - Laminated glass and laminated safety glass - Evaluation

More information

ILNAS-EN ISO 23640:2015

ILNAS-EN ISO 23640:2015 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) In-vitro-Diagnostika - Haltbarkeitsprüfung von Reagenzien für invitro-diagnostische Untersuchungen

More information

Founding - Magnetic particle testing

Founding - Magnetic particle testing Irish Standard Founding - Magnetic particle testing CEN 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-32289-2 Edition 1 EN 1176-7:2008 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation This

More information

English Version. Daylight of buildings

English Version. Daylight of buildings EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM DRAFT pren 17037 July 2016 ICS 91.160.01 English Version Daylight of buildings L'éclairage naturel des bâtiments Tageslicht in Gebäuden This draft European

More information

Sýnishorn Railway applications - Fire protection of railway vehicles - Part 2: Requirements for fire behaviour of materials and components

Sýnishorn Railway applications - Fire protection of railway vehicles - Part 2: Requirements for fire behaviour of materials and components ÍST EN 45545-2:2013 Fellur úr gildi 30.8.2013 ICS: 13.22 Búnaður til notkunar við járnbrautir - Eldvarnir í járnbrautarvögnum - Hluti 2: Kröfur varðandi hegðun efna og íhluta í eldi Railway applications

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 9111:2006 Aerospace series - Quality management systems - Assessment applicable to maintenance organizations (based on ISO 9001:2000) Aerospace series - Quality management systems

More information

FINAL DRAFT FprEN

FINAL DRAFT FprEN EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM FINAL DRAFT FprEN 14960-1 January 2019 ICS 97.190; 97.200.50 Will supersede EN 14960:2013 English Version Inflatable play equipment - Part 1: Safety

More information

Paper and board - Determination of grammage (ISO 536:2012)

Paper and board - Determination of grammage (ISO 536:2012) Irish Standard I.S. EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard

More information

Office furniture - Office work chair - Part 2: Safety requirements

Office furniture - Office work chair - Part 2: Safety requirements Irish Standard Office furniture - Office work chair - Part 2: Safety requirements NSAI 2009 No copying without NSAI permission except as permitted by copyright law. EN 1335-2:2009 I.S. EN 1335-2:2000 EN

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1401-2 May 2012 ICS 23.040.01; 93.030 Supersedes ENV 1401-2:2000 English Version Plastics piping systems for non-pressure

More information

HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO 10664:2005) IRISH STANDARD I.S. EN ISO 10664:2005. Price Code

HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO 10664:2005) IRISH STANDARD I.S. EN ISO 10664:2005. Price Code IRISH STANDARD I.S. EN ISO 10664:2005 ICS 21.060.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO Tel: +353 1 807 3800

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1555-7 January 2013 ICS 23.040.01; 91.140.40 Supersedes CEN/TS 1555-7:2003 English Version Plastics piping systems for the

More information

ILNAS-EN ISO :2017

ILNAS-EN ISO :2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle (ISO 9606-1:2012, einschließlich

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1565-2 May 2012 ICS 23.040.20; 91.140.80 Supersedes ENV 1565-2:2001 English Version Plastics piping systems for soil and

More information

Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations

Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations Irish Standard I.S. EN 9101:2011 Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations NSAI 2011 No copying without NSAI permission except as permitted by copyright

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16165 April 2012 ICS 17.040.20; 93.080.10 English Version Determination of slip resistance of pedestrian surfaces - Methods

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-32335-6 Edition 1 (incorporating EN amdt 1) EN 13795:2011 Edition 2 (incorporating amdt 1) SOUTH AFRICAN NATIONAL STANDARD Surgical drapes, gowns and clean air suits, used as medical devices

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 13445-102 May 2015 ICS 23.020.30 English Version Unfired pressure vessels - Part 102: Example of application of vertical vessel with bracket

More information

CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: VISUAL METHOD (ISO :2004) IRISH STANDARD I.S. EN ISO :2005

CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: VISUAL METHOD (ISO :2004) IRISH STANDARD I.S. EN ISO :2005 IRISH STANDARD I.S. EN ISO 4630-1:2005 ICS 87.060.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: Tel:

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-32290-8 EN 1176-10:2008 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 1749 June 2014 ICS 91.140.40 Supersedes CEN/TR 1749:2009 English Version European scheme for the classification of gas appliances according

More information

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011) Irish Standard I.S. EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) NSAI 2011 No copying without NSAI permission except

More information

PACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code

PACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code STANDARD I.S. EN 13430:2004 ICS 13.030.50 55.020 National Standards Authority of Ireland Dublin 9 Ireland PACKAGING - REQUIREMENTS FOR Tel: (01) 807 3800 Fax: (01) 807 3838 PACKAGING RECOVERABLE BY MATERIAL

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 22475-3 December 2007 ICS 03.120.20; 03.100.30; 93.020 English Version Geotechnical investigation and testing - Sampling

More information

English Version. Office furniture - Office work chair - Part 4: Clarifications to EN :2000 (Dimensions)

English Version. Office furniture - Office work chair - Part 4: Clarifications to EN :2000 (Dimensions) TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 1335-4 October 2009 ICS 97.140 English Version Office furniture - Office work chair - Part 4: Clarifications to EN 1335-1:2000 (Dimensions)

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15216:2007 Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates Characterization of waste - Determination of total dissolved solids (TDS)

More information

LABORATORY GLASSWARE - GRADUATED MEASURING CYLINDERS (ISO 4788:2005) IRISH STANDARD I.S. EN ISO 4788:2005. Price Code

LABORATORY GLASSWARE - GRADUATED MEASURING CYLINDERS (ISO 4788:2005) IRISH STANDARD I.S. EN ISO 4788:2005. Price Code IRISH STANDARD I.S. EN ISO 4788:2005 ICS 17.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie LABORATORY GLASSWARE - GRADUATED

More information

EN ISO 9001 ÖNORM. Quality management systems Requirements. Edition: EN ISO 9001: Cor.1: (consolidated version)

EN ISO 9001 ÖNORM. Quality management systems Requirements. Edition: EN ISO 9001: Cor.1: (consolidated version) ÖNORM EN ISO 9001 Edition: 2009-08-15 Quality management systems Requirements (ISO 9001:2008 + Cor.1:2009) (consolidated version) Qualitätsmanagementsysteme Anforderungen (ISO 9001:2008 + Cor.1:2009) (konsolidierte

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 3746:2007 Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD EESTI STANDARDIKESKUS

More information

Aerospace series - Quality systems - First article inspection requirements

Aerospace series - Quality systems - First article inspection requirements Irish Standard I.S. EN 9102:2015 Aerospace series - Quality systems - First article inspection requirements CEN 2016 No copying without NSAI permission except as permitted by copyright law. I.S. EN 9102:2015

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-33591-5 EN 12353:2013 SOUTH AFRICAN NATIONAL STANDARD Chemical disinfectants and antiseptics Preservation of test organisms used for the determination of bactericidal (including Legionella),

More information

REFRIGERATING SYSTEMS AND HEAT

REFRIGERATING SYSTEMS AND HEAT IRISH STANDARD I.S. EN 378-2:2008 ICS 27.200 27.080 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie REFRIGERATING SYSTEMS

More information

FINAL DRAFT FprEN

FINAL DRAFT FprEN EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM FINAL DRAFT FprEN 13476-2 November 2017 ICS 23.040.01; 93.030 Will supersede EN 13476-2:2007 English Version Plastics piping systems for non-pressure

More information

English Version. This Technical Report was approved by CEN on 11 December It has been drawn up by the Technical Committee CEN/TC 135.

English Version. This Technical Report was approved by CEN on 11 December It has been drawn up by the Technical Committee CEN/TC 135. TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 17052 January 2017 ICS 91.080.10 English Version Guidelines on implementing EN 1090-1:2009+A1:2011, Execution of steel structures and aluminium

More information

COMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: PHYSICAL AND LINK LAYER IRISH STANDARD I.S. EN :

COMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: PHYSICAL AND LINK LAYER IRISH STANDARD I.S. EN : IRISH STANDARD I.S. EN 13757-2:2005 ICS 33.200 35.100.10 35.100.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland COMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: Tel:

More information

BIOLOGICAL EVALUATION OF MEDICAL

BIOLOGICAL EVALUATION OF MEDICAL IRISH STANDARD I.S. EN ISO 10933-12:2007 ICS 11.100.20 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353

More information

FINAL DRAFT FprEN

FINAL DRAFT FprEN EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM FINAL DRAFT FprEN 16510-2-2 January 2016 ICS 97.100.30 Will supersede EN 13229:2001 English Version Residential solid fuel burning s - Part 2-2: Inset

More information

ALARM SYSTEMS - INTRUSION AND

ALARM SYSTEMS - INTRUSION AND IRISH STANDARD I.S. EN 50131-1:2006 ICS 13.310 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS -- PART 1: SYSTEM Tel: +353 1 807 3800 Fax:

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16411 December 2014 ICS 97.190 Supersedes CEN/TR 16411:2014 English Version Child use and care articles - 2014 compiled interpretations of

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1187 January 2012 ICS 13.220.50; 91.060.20 Supersedes ENV 1187:2002 English Version Test methods for external fire exposure

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 4170:2007 Aerospace series - Paints and varnishes - Test method for measurement of resistance to cold crack temperature cycle Aerospace series - Paints and varnishes - Test method

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16429 March 2013 ICS 13.040.40 English Version Stationary source emissions - Sampling and determination of hydrogen chloride

More information

SANS 21-1:2009 Edition 1 EN 115-1:2008

SANS 21-1:2009 Edition 1 EN 115-1:2008 ISBN 978-0-626-22589-6 EN 115-1:2008 SOUTH AFRICAN NATIONAL STANDARD Safety of escalators and moving walks Part 1: Construction and installation This national standard is the identical implementation of

More information

Medical gloves for single use - Part 2: Requirements and testing for physical properties

Medical gloves for single use - Part 2: Requirements and testing for physical properties Irish Standard I.S. EN 455-2:2015 Medical gloves for single use - Part 2: Requirements and testing for physical properties CEN 2015 No copying without NSAI permission except as permitted by copyright law.

More information

DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann IRISH STANDARD I.S. EN 15102:2007 ICS 91.180 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie DECORATIVE WALLCOVERINGS -

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15205:2007 Determination of hexavalent chromium in corrosion protection layers - Qualitative analysis Determination of hexavalent chromium in corrosion protection layers - Qualitative

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 9554:2005 Fibre ropes - General specification Fibre ropes - General specification EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-27398-9 Edition 1 EN 14509:2013 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Self-supporting double skin metal faced insulating panels Factory made products Specifications This national standard

More information

ILNAS-EN ISO :2005

ILNAS-EN ISO :2005 Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2005) Matériaux métalliques - Essai de dureté Vickers - Partie 1: Méthode d'essai (ISO 6507-1:2005) Metallische Werkstoffe -

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 12831-2 April 2017 ICS 91.120.10; 91.140.10 English Version Energy performance of buildings - Method for calculation of the design heat load

More information

ELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) IRISH STANDARD I.S. EN 62382:2007. Price Code

ELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) IRISH STANDARD I.S. EN 62382:2007. Price Code IRISH STANDARD I.S. EN 62382:2007 ICS 25.040.01 ELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800

More information

ILNAS-EN ISO 2692:2006

ILNAS-EN ISO 2692:2006 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006) Geometrische

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1004:2005 Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements Mobile access and working towers

More information

Camping tents (ISO 5912:2011)

Camping tents (ISO 5912:2011) Irish Standard I.S. EN ISO 5912:2011 Camping tents (ISO 5912:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16829 August 2016 ICS 13.220.40; 13.230; 53.040.10 English Version Fire and explosion prevention and protection for bucket elevators Prévention

More information

ILNAS-EN 62560:2012/A1:2015

ILNAS-EN 62560:2012/A1:2015 ILNAS-EN 62560:2012/A1:2015 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications Lampes à LED autoballastées pour l'éclairage général fonctionnant à des tensions

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14959:2006 Touch and close fasteners - Determination of resistance to fraying after washing Touch and close fasteners - Determination of resistance to fraying after washing EESTI

More information

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009)

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) Irish Standard I.S. EN ISO 10874:2012 Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) NSAI 2012 No copying without NSAI permission except as permitted by copyright law.

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 225-1:2007 Atomizing oil burners - Oil burner pumps and oil burner motors- Connecting dimensions - Part 1: Oil burner pumps Atomizing oil burners - Oil burner pumps and oil burner

More information

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) Irish Standard I.S. EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 9133:2005 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts Aerospace series - Quality management systems - Qualification procedure

More information

Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation

Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation Irish Standard I.S. EN 12606-1:2015 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation CEN 2015 No copying without NSAI permission except as permitted

More information

Provläsningsexemplar / Preview SVENSK STANDARD SS-EN 1670:2007 Fastställd 2007-03-23 Utgåva 2 Byggnadsbeslag Korrosionsmotstånd Krav och provningsmetoder Building hardware Corrosion resistance Requirements

More information

Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs

Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs Irish Standard I.S. EN 13906-1:2013 Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs CEN 2013 No copying without NSAI permission except as

More information

ILNAS-EN 61882:2016. Hazard and operability studies (HAZOP studies) - Application guide

ILNAS-EN 61882:2016. Hazard and operability studies (HAZOP studies) - Application guide ILNAS-EN 61882:2016 Hazard and operability studies (HAZOP studies) - Application guide Études de danger et d'exploitabilité (études HAZOP) - Guide d'application HAZOP-Verfahren (HAZOP-Studien) - Anwendungsleitfaden

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14175-6:2006 Fume cupboards - Part 6: Variable air volume fume cupboards Fume cupboards - Part 6: Variable air volume fume cupboards EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 16264:2004 Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection Water quality - Determination of soluble silicates by flow

More information

SOLID BIOFUELS - METHODS FOR

SOLID BIOFUELS - METHODS FOR IRISH STANDARD I.S. CEN/TS 15105:2005 ICS 75.160.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland SOLID BIOFUELS - METHODS FOR DETERMINATION OF THE WATER SOLUBLE Tel: +353 1 807 3800

More information

Bitumen and bituminous binders - Specifications for paving grade bitumens

Bitumen and bituminous binders - Specifications for paving grade bitumens Irish Standard I.S. EN 12591:2009 Bitumen and bituminous binders - Specifications for paving grade bitumens NSAI 2009 No copying without NSAI permission except as permitted by copyright law. EN 12591:2009

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14073-2:2004 Office furniture - Storage furniture - Part 2: Safety requirements Office furniture - Storage furniture - Part 2: Safety requirements EESTI STANDARDIKESKUS EESTI STANDARDI

More information

Metallic materials - Calibration of forceproving instruments used for the verification of uniaxial testing machines (ISO 376:2011)

Metallic materials - Calibration of forceproving instruments used for the verification of uniaxial testing machines (ISO 376:2011) Irish Standard I.S. EN ISO 376:2011 Metallic materials - Calibration of forceproving instruments used for the verification of uniaxial testing machines (ISO 376:2011) NSAI 2011 No copying without NSAI

More information

Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems

Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems Irish Standard I.S. EN 50159:2010 Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems NSAI 2010 No copying without NSAI permission

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16677 May 2014 ICS 11.040.70 English Version Ophthalmic optics - Reference method for the testing of spectacle frames and

More information

EN ISO ÖNORM. Edition: (ISO 14937:2009)

EN ISO ÖNORM. Edition: (ISO 14937:2009) ÖNORM EN ISO 14937 Edition: 2010-03-15 Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 1084:2004 Fasteners - Hot dip galvanized coatings Fasteners - Hot dip galvanized coatings EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard

More information

OVERHEAD ELECTRICAL LINES EXCEEDING

OVERHEAD ELECTRICAL LINES EXCEEDING IRISH STANDARD I.S. EN 50423-1:2005 ICS 29.240.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV UP TO AND INCLUDING AC 45 KV Tel: +353

More information

Operation of electrical installations -- Part 1: General requirements

Operation of electrical installations -- Part 1: General requirements Irish Standard I.S. EN 50110-1:2013 Operation of electrical installations -- Part 1: General requirements CENELEC 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 2486:2005 Aerospace series - Aluminium alloy AL- P2618A - Forging stock Aerospace series - Aluminium alloy AL-P2618A - Forging stock EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15311:2007 Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions Thermal spraying - Components with thermally sprayed coatings - Technical supply

More information