This document is a preview generated by EVS

Transcription

1 EESTI STANDARD EVS-EN :2017 MITMESUGUSED LAMBIPESAD OSA 2-3: ERINÕUDED. LAMBIPESAD KAHESOKLILISTELE SIRG-LEEDLAMPIDELE Miscellaneous lampholders Part 2-3: Particular requirements Lampholders for double-capped linear LED lamps

2 EVS-EN :2017 EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN :2017 sisaldab Euroopa standardi EN :2017 ingliskeelset teksti. This Estonian standard EVS-EN :2017 consists of the English text of the European standard EN :2017. Standard on jõustunud sellekohase teate avaldamisega EVS Teatajas. This standard has been endorsed with a notification published in the official bulletin of the Estonian Centre for Standardisation. Euroopa standardimisorganisatsioonid on teinud Euroopa standardi rahvuslikele liikmetele kättesaadavaks Date of Availability of the European standard is Standard on kättesaadav Eesti Standardikeskusest. The standard is available from the Estonian Centre for Standardisation. Tagasisidet standardi sisu kohta on võimalik edastada, kasutades EVS-i veebilehel asuvat tagasiside vormi või saates e-kirja meiliaadressile standardiosakond@evs.ee. ICS Standardite reprodutseerimise ja levitamise õigus kuulub Eesti Standardikeskusele Andmete paljundamine, taastekitamine, kopeerimine, salvestamine elektroonsesse süsteemi või edastamine ükskõik millises vormis või millisel teel ilma Eesti Standardikeskuse kirjaliku loata on keelatud. Kui Teil on küsimusi standardite autorikaitse kohta, võtke palun ühendust Eesti Standardikeskusega: Koduleht telefon ; e-post info@evs.ee The right to reproduce and distribute standards belongs to the Estonian Centre for Standardisation No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, without a written permission from the Estonian Centre for Standardisation. If you have any questions about copyright, please contact Estonian Centre for Standardisation: Homepage phone ; info@evs.ee

3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN April 2017 ICS English Version Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps (IEC :2016) Douilles diverses pour lampes - Partie 2-3: Règles particulières - Douilles pour lampes LED linéaires à deux culots (IEC :2016) Sonderfassungen - Teil 2-3: Besondere Anforderungen - Lampenfassungen für zweiseitig gesockelte röhrenförmige LED-Lampen (IEC :2016) This European Standard was approved by CENELEC on CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN :2017 E

4 EN EVS-EN :2017 European foreword The text of document 34B/1851/FDIS, future edition 1 of IEC , prepared by IEC/SC 34B "Lamp caps and holders" of IEC/TC 34 "Lamps and related equipment" was submitted to the IEC- CENELEC parallel vote and approved by CENELEC as EN :2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement latest date by which the national standards conflicting with the document have to be withdrawn (dop) (dow) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document. Endorsement notice The text of the International Standard IEC :2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60400:2008 NOTE Harmonized as EN 60400:2008. IEC 60400:2008/AMD1:2011 NOTE Harmonized as EN 60400:2008/A1:2011. IEC 60400:2008/AMD2:2014 NOTE Harmonized as EN 60400:2008/A1:

5 2 IEC :2016 EVS-EN :2017 IEC 2016 CONTENTS FOREWORD Scope Normative references Terms and definitions General requirements General conditions for tests Classification Marking Protection against electric shock Terminals Provision for earthing Construction Moisture resistance, insulation resistance and electric strength Mechanical strength Screws, current-carrying parts and connections Creepage distances and clearances Endurance Resistance to heat and fire Resistance to excessive residual stresses (season cracking) and to rusting Annex A (normative) Lampholders covered by this standard Annex B (normative) Test probes for checking gasket sleeves on lampholders for higher IP protection Annex C (informative) Explanatory details for the installation of lampholders according to Bibliography Figure 1 Mounting sheet... 7 Figure 2 Fixture for the testing of lampholder flexibility... 8 Figure 3 Test cap GX16t Figure 4 Mounting jig for the testing of lampholders Figure B.1 Test probes for checking gasket sleeves Figure C.1 Examples of lampholders... 16

6 IEC EVS-EN : :2017 IEC MISCELLANEOUS LAMPHOLDERS Part 2-3: Particular requirements Lampholders for double-capped linear LED lamps 1 Scope This part of IEC applies to lampholders for double-capped linear LED lamps intended for building-in (to be used for general lighting service and with caps as listed in Annex A). Lampholders within the scope of this standard do not include heat management. Double-capped linear LED lamps can also be used with lampholders originally been designated for other technologies. The requirementsfor these lampholders are covered by separate standards. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. Clause 2 of IEC applies, together with the following additions. IEC , Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders IEC , Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges IEC , Miscellaneous lamp holders Part 1: General requirements and tests IEC 62504, General lighting Light emitting diode (LED) products and related equipment Terms and definitions 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC and in IEC 62504, as well as the following apply. 3.1 independent lampholder lampholder so designed that it can be mounted separately from a luminaire, while at the same time providing all the necessary protection according to its classification and marking [SOURCE: IEC 60238:2004, 2.5] 3.2 flexible lampholder for linear double-capped LED lamp flexible lampholder lampholder in which the base of each holder is rigidly mounted in the luminaire but which has one or both of the lampholders so designed as to allow axial movement of the contacts