Clino Guard. Intelligent Life Care. Solutions for safe and efficient care

Transcription

1 Clino Guard Intelligent Life Care Solutions for safe and efficient care

2 Clino Guard more time for excellent care Rising costs, staff shortages and an aging society are just three of the many reasons why medical and nursing care must become more efficient. Clino Guard from Ackermann, an RFID-based system for networked safety solutions, makes it possible to meet these market requirements. Discreet protection due to RFID technology Clino Guard Radio Frequency IDentification is employed when the safety of people, facilities and equipment is a top priority. Intelligent transponders allow reliable, discreet and contactless identification and localization. The right system for everybody Clino Guard is available in two versions. With the basic Clino Guard system (starting from page 18), you can provide safety for smaller buildings or areas at very little cost. Clino Guard plus (starting from page 6) is the system of choice for larger projects and if networking with other systems is a requirement. Safety Productivity Networking 2

3 3

4 4 Clino Guard in practice in hospitals and care facilities

5 A flexible system with a wide range of options Protection of people suffering from dementia A perfect combination of freedom of movement and safety due to virtual protection zones Baby protection Clear identification including an alarm if the transponder is removed minimizes the risk of mistaken identity and protects in a sustained manner Mobile call initiation For nurse calls, emergency calls and for staff acknowledgement of calls Localization of persons Rapid localization of persons, supported by video surveillance, if required Personal safety Increased safety while on the move due to movement sensors and temperature monitoring Device tracking Location technology and protection against theft; also available with movement sensors and tamper alarm to suit different applications Audit-proof logging Automatic logging of all call data (location, time, person, acknowledgement) via connection to the nurse call system Access surveillance Effective protection of entrances and exits, elevators, treatment rooms, outdoor areas, etc. Cashless payment Extra comfort for patients or residents 5

6 Clino Guard plus networking for extra efficiency The networking of Clino Guard plus with the nurse call system is a key feature: a wide range of functions makes it easier and safer to organize care processes from the protection of people suffering from dementia to device tracking. In this way, an integrated solution is created that combines all of the functions required. It provides practical support for care processes, including audit-proof recording of all calls and alarms. Compelling arguments in favor of Clino Guard plus: Optimal safety for patients and staff Increased quality of life and freedom of movement for residents Support for care processes Wide range of application: baby protection, protection of dementia sufferers, device tracking, etc. Integration with the nurse call system Discreet and effective due to RFID technology Clear identification due to unique ID Real-time location system Options for mobile call forwarding etc. 6

7

8 Clino Guard plus intelligent system, cleverly integrated Transmitter unit Nurse call server and other systems Receiver unit Transponders Transmitter unit Central control unit Station Functions of Clino Guard plus (exact localization and identification) Real-time location system Clino Guard plus essentially consists of three components: the location system hardware (receiver and transmitter units), the software and the RFID transponders. Communication between the transponders and the receiver units is bidirectional and facilitates localization in real time. The transmitter units transfer position information to the transpon ders. The transponders then transmit this information and their own unique ID to the receiver unit. The Clino Guard plus software contains escalation routines that allow several different alarm scenarios. Transponder functions: Deliberate call initiation: Movement sensor Temperature monitoring Alarm if transponder is removed Alarm after latency period without movement Mobile call initiation Vibration as acknowledgement of call initiation or as call signal Continuous monitoring of functions (battery, loss) Precisely defined protection zones The transmitter units generate a spherical detection field inside buildings with a radius of about 5 meters. To cover larger areas up to 375 m 2, several slave units are simply added to a master transmitter unit. The receiver units record the data from transponders in a radius of 25 m, or up to 250 m in outdoor areas. This facilitates precise protection of specific areas. Intelligent transponders 8

9 Clino Guard plus transmitter unit 1 Nurse call server with Clino Guard plus software Clino Guard plus receiver unit Clino Guard plus transmitter unit 2 Clino Call DECTplus central control unit DECT terminal devices Ward Management Controller Dashboard 7 : NBP M > 125 Master station Central control unit Station Schematic networking of Clino Guard plus Synergies with the nurse call system Clino Guard plus can be connected centrally to the nurse call system, for example to forward triggered calls and alarms to the nursing staff in a targeted way, using either dashboards or mobile devices. The corresponding software can also integrate additional systems to support the processes in an optimal way. For example, only certain persons are allowed access to sensitive areas. Corridor data bus Direct connection Data network Software supports processes Clino Guard plus software allows nurses to access all call information centrally on the PC workstation. Data from other systems is also displayed or made accessible, for example video recordings. It can be seen at a glance where, when and by whom the alarm was triggered. As a result, the nursing staff can react in a more targeted way, saving a lot of valuable time. 9

10 Product overview Clino Guard plus 790P400 Basic starter package Basic starter package for a single-door transponder system, consisting of a transmitter unit and a receiver unit, with the option of upgrading to an Online system. Transmitter unit with permanent LF field with an adjustable range of up to 5 m (exciter frequency: 9 KHz), field can be extended by using up to 4 slave transmitter units. Individual set-up of transmitter unit ID with the option of alarm suppression via the integral control input in the transmitter unit, e.g. via an external door contact. Receiver unit reliably detects patient and staff transponders (reception frequency: 868 MHz). Alarms are reliably signaled via the integral relay contact, e.g. for transmission to the nurse call system. Integral buzzer for acoustic signaling of an alarm locally. Alarm suppression on active confirmation by a staff transponder (outside the active detection area, radius depends on building design: max. approx. 30 m), or when the staff transponder is recognized within the detection area of the transmitter unit. Transponder battery monitoring with acoustic signal and fitted with LED signal elements for local status display, and also includes a local reset function. Transmitter and receiver units can be networked via an RS-485 data bus that can be extended by the license update Basic starter package for online system (required for each starter package), with the option of migrating all activities to the Basic Software Online System via Ethernet-LAN (TCP-IP / RS485 converter required). PSU via the separate 230 V AC / 12 V DC power supply / UPS combination. 790P412 License-Update BSP Online License update for the basic starter package online system with the ability to transfer all activities to base-line software system via Ethernet LAN. Separate license update per starter package is necessary. (TCP-IP / RS485-converter required). 10

11 790P401 Locator unit Transmitter unit with permanent LF field with an adjustable range of up to 5 m (exciter frequency: 9 KHz), field can be extended by using up to 4 slave transmitter units. Individual set-up of transmitter unit ID with the option of alarm suppression via the integral control input in the transmitter unit, e.g. via an external door contact. A transponder receives the transmitter unit ID and transmits this ID to the receiver unit together with its own transponder ID. Transmitter and receiver units can be networked via an RS-485 data bus, option of using the Online System to migrate all activities to the Basic Software Online System. Fitted with LED signal elements for local status display, and also includes a local reset function. PSU via the separate 230 V AC / 12 V DC power supply / UPS combination (up to 2 units). RS 485 (RJ45 terminals), optional end-of-line resistor. 790P402 Locator unit slave Optional slave transmitter unit to extend the coverage (doors / zones) of a higher-level transmitter unit, connected via the RS485 data bus. With permanent LF field with an adjustable range of up to 5 m (exciter frequency: 9 khz), synchronized with the transmitter unit. 790P403 Receiver unit Receiver unit for reliable detection of patient and staff transponders (reception frequency: 868 MHz). Alarms are reliably signaled via the integral relay contact, e.g. for transmission to the nurse call system. Integral buzzer for acoustic signaling of an alarm locally. Alarm suppression on active confirmation by a staff transponder (outside the active detection area, radius depends on building design: max. approx. 30 m), or when the staff transponder is recognized within the detection area of the associated transmitter unit. Transponder battery monitoring with acoustic signal and fitted with LED signal elements for local status display, and also includes a local reset function. Transmitter and receiver units can be networked via an RS-485 data bus, option of using the Online System to migrate all activities to the Basic Software Online System via Ethernet-LAN (TCP-IP / RS485 converter required). Fitted with LED signal elements for local status display, and also includes a local reset function. 11

12 790P404 TCP-IP / RS485 converter TCP-IP / RS485 converter to connect the transmitter / receiver units and optional input / output modules (max. 30 components) to the nurse call server for the Clino Guard plus system via Ethernet-LAN. Fitted with an RJ45 socket for use with Ethernet-LAN (10 / 100MBit). RS485 data bus wired via the CAT5 junction box supplied and the associated connecting lead. Fitted with 3 LED signal elements for local status display. Components and TCP-IP / RS485 converter are administered via the Basic Software Online System. 790P405 Input / output module Interface unit with 16 inputs and 16 outputs to connect external systems to Clino Guard plus via potential-free contacts. Control of outputs and evaluation of inputs depends on the configuration of the higher-level Basic Software Online System. Inputs are used in quiescent current or normally open circuit technology and outputs are used as NC or NO contacts. 790P406 Cable for input / output module Connecting lead for interface unit. 790P407 Power supply / UPS 230VAC-12VDC 2A Device combination consisting of single-phase power supply (12 V DC / 2 A) for the constant DC supply and as an uninterruptible power supply (Online DC- UPS) to components of the Clino Guard plus system. Compact construction using the latest circuit technology with integral battery module (7 Ah), ready for wall mounting. Fitted with tamper contact and fault message contact in case of power failure. The device status is shown on an LED display: AC mains power, power failure (UPS operation). To achieve the maximum bridging period, the battery must be replaced every 4 years. 12

13 790P410 Basic Software Online System Software module Basic Software Online System for administration and configuration of the Clino Guard plus. For installation on the Clino System 99plus nurse call server (minimum requirement: Windows XP Pro) with facilities for setting up the transmitter / receiver units and optional input / output modules. Allocation of transponder configuration data (patients, baby, staff, devices, etc.) and dependencies between different transponders (e.g. mother / baby transponders) and associated escalation stages. Configuration stored in a system database for data backup and further use, e.g. on the Clino System 99plus nurse call server. Administration of all incoming activities and alarms (transponders, inputs) and execution of the dependent escalation stages. All system components monitored and all activities saved in online mode. Administrator access rights required to adapt the ETH-LAN network card (10 / 100) settings to the system environment of the Clino Guard plus. Full TCP / IP network card support required for access to the ETH-LAN. Application software for the following functions: Configuration tool Allocation of transmitter and receiver units (incl. inputs and outputs) Allocation of transponder configuration (name, ID, function) Definition of system parameters for Clino Guard plus Setting up alarm types (name, type) Configuration of input and output modules for control of external systems Service functions Database management system for configuration data storage Simple system management tools for system analysis Logging of all system activities Set-up of fault monitoring Ready for further license updates (video surveillance, graphical user interface and access control etc.) Optionally: Message transmission to a wireless message system (e.g. personal paging system - PPS or telecommunications system - DECT) Freely configurable pager addresses for messages from Clino Guard plus Definition of the display format for the messages to be transmitted Assignment of repeat intervals, acoustic call signals, etc. 13

14 790P411 IPC-driver for online system License update for the Basic Software Online System with the option of migrating all activities to the Clino System 99plus via IPC interface. A license update is required for each system. An existing System 99plus is required. 790P413 ESPA driver for online system License update for the Basic Software Online System to connect a message transfer system to Clino Guard plus via ESPA Option of adapting the settings to the project- specific requirements of the care facility. Call messages from the system are transmitted to the connected message transfer system according to the configuration and displayed by the configured DECT telephones. Administrator access rights are required to change settings, e.g. to adapt the serial interface to the system environment. Application software for the following functions: Configuration tool with database management system for data storage Serial interface set-up (RS232 / RS422) Freely configurable pager addresses Allocation of alarm messages to pager addresses Assignment of repeat intervals Adjustment of acoustic call signals Configuration of different escalations for each call type group Definition of the display format for the messages to be transmitted Prerequisites: Software module Basic Software Online System Clino Guard plus Clino System 99plus nurse call server with free serial interface Serial connecting lead 14

15 790P420 Transponder for the dementia patient Transponder for patients with dementia, to be worn on the wrist. Transponder is actuated if it enters the permanent LF field of a transmitter unit. The transponder processes the transmitter unit ID and transmits this ID to the receiver unit together with its own transponder ID. The battery status is also transmitted. Transmission range up to 25 m, dependent on ambient conditions. 790P421 Transponder for the patient alarm As part no. 790P420, but also has an alarm button. Patient can activate an alarm, even on the move. Alarm is acknowledged via the integral LED. 790P422 Transponder for baby As part no. 790P420, but specially designed for monitoring a baby. Use in conjunction with an associated mother transponder for alarm suppression. 790P423 Transponder for mother As part no. 790P420, but specially designed to be worn by a mother whose baby is wearing the baby transponder. The alarm can only be suppressed if the mother transponder which has been assigned to a baby transponder enters the permanent LF field of a transmitter unit. 15

16 790P424 Transponder for care giver As part no. 790P420, but specially designed to be worn by a nurse. Also fitted with a confirmation button. The alarm can be suppressed if a patient transponder enters the permanent LF field of a transmitter unit in conjunction with the staff transponder. The confirmation button also enables the nurse to suppress an alarm even outside the LF field of the receiver unit by setting the receiver unit to inactive. Button confirmation is acknowledged via the integral LED. 790P425 Transponder for surveillance The calibration transponder is used during commissioning of the Clino Guard plus system, specifically to detect and establish the radio range of the transmitter units. The LED integrated into the transponder lights up when the wearer enters the LF field. The LED goes out when the wearer leaves the radio range of the transmitter unit. An acoustic acknowledgement in the receiver unit is triggered by pressing a button on the calibration transponder. The transponder can be used during commissioning of Single-door transponder systems for assignment of transmitter and receiver units. 16

17 790P426 Bracelet (velcro) for transponder Bracelet to enable a transponder to be worn on the wrist. Can be reused many times thanks to the easy-to-open velcro fastener, specifically designed to attach the transponder to the wrist. 790P427 Bracelet (rubber) for transponder Rubberized bracelet to enable a transponder to be worn on the wrist. Bracelet closure cannot be opened, to prevent deliberate removal. The bracelet can only be removed by destroying it. 790P428 Bracelets for transponder dementia Bracelet to enable a transponder to be worn on the wrist. Bracelet closure cannot be opened, to prevent deliberate removal. The bracelet can only be removed by destroying it. 790P429 Accessories (10 caps plus sealings) Set of spare parts for white transponders, consisting of 10 covers with seals and a tool to open the transponder cover. 17

18 Clino Guard easy installation, reliable protection Clino Guard combines safety and freedom of movement, especially for people suffering from dementia. The transmitter / receiver units can be installed in just about any place to provide unobtrusive protection: near the door area, indoors or outdoors. The detection area is between 3.5 and 6 m; this can be extended using additional aerials and ground contacts, if needed. Intelligent and reliable detection The use of different resting and operating frequencies (125 khz / 868 MHz) and three-dimensional aerials guarantees reliable detection and data transmission. The system also recognizes automatically when a patient is accompanied by a nurse and does not trigger an alarm. Compelling arguments in favor of Clino Guard: Reliable safety for patients and staff Discretion due to virtual protection zones Lower level of supervision required Increased quality of life and freedom of movement System is easy to install Robust, discreet transponders for patients Transponders with call cancellation for staff 18 Important notice: The latest generation of Clino Guard systems is not compatible with previous versions.

19

20 Product overview Clino Guard 790P100 Locator / receiver unit Active transponder system with adjustable range up to 6 m radius. Consisting of an antenna unit (868 MHz operating frequency, 125 khz stand-by frequency), an evaluation unit with relay contacts (changeover), integrated alarm signaling device, and 230 V power supply (integrated). Expandable with a relay card for zone identification and an additional external antenna (if necessary also via reproducer). 790P137 Relay card Locator / receiver unit The active transponder system can be expanded by the relay card for identification of several persons or groups. Up to five persons or groups can be differentiated. For example, the outputs can be used for connection to the nurse call system in order to generate dedicated alarms in the respective station. Additionally, a reader-monitoring notification or also a battery status onward transmission can be generated. The allocation of a patient transponder occurs directly via the relay card. 790P033 Additional antenna compact Additional antenna to adjust the detection range to special architectural requirements by up to 3.5 m. 790P103 Locator / receiver unit IP64 As 790P100, but in external housing with IP 64 moisture protection. 790P031 Auxiliary LF antenna (optional) Supplement of transmitter / receiver unit - long distance. This auxiliary LF antenna for long distance is to be used for ranges exceeding 5.5 m. Especially suitable to adjust the receiver area to special structural demands such as wide entrance doors, for example. 20

21 790P120 Patient transponder pendant Patient transponder with three-dimensional antenna and battery monitoring. 790P121 Patient transponder watch dummy Patient transponder with three-dimensional antenna and battery monitoring. The bracelet can only be opened with a magnetic key held by the care personnel. 790P122 Patient transponder watch Patient transponder with three-dimensional antenna and battery monitoring. The bracelet can only be opened with a magnetic key held by the care personnel. 790P123 Patient transponder alarm Transponder bracelet for the patient to the emergency release outside the active sensing area of a transceiver, radius dependent of the building condition: a maximum of about 30 m. Leather bracelet with classic buckle. 790P124 Transponder for care giver Personal transponders with one-dimensional-looking antenna and battery monitoring, call restriction and to call canceling. This transponder is not suitable as patient transponder. 21

22 790P050 Leather case Leather case with magnetic fastener (white button) for patient transponder (790P120) to be attached to clothing (e.g. to the belt) including accessories. 790P053 Magnetic key Magnetic key integrated in a bag to open the magnetic fasteners (white button and bracelet). For nursing personnel only. 790P054 Spare bracelet with fastener Spare bracelet for bracelet transponder (Part No. 790P121). 790P051 Spare fastener Complete additional magnetic fastener (white button) 790P052 Spare bracelet with fastener Spare bracelet for wrist watch transponder (Part No. 790P11, 790P122). 22

23 Comparison of systems Applications Clino Guard plus Clino Guard Protection of people with dementia Baby protection Access surveillance Direction detection Device tracking Person locating system Call forwarding (also as SMS etc.) limited Cashless payment This overview will make it easy for you to select the right system. If you have any technical questions, please contact Ackermann see reverse for contact information. Functions Localization in real-time Identification unique only groups Mobile call initiation / call cancellation (staff) Movement sensor* Temperature monitoring* Monitoring of transponder batteries Audit-proof recording (call type, location, only call type and time time, person, additional information) Alarm caused by sensor removal* Tamper alarm* (device transponder) Vibration alarm* (call acknowledgement or nurse call) *Transponder types on request Installation Networking with nurse call system IPC interface to Ackermann Commissioning by Ackermann / partners Quick installation optional Note: The current generation of Clino Guard systems is not compatible with previous versions! Components and replacement parts for previous versions are still available please feel free to contact us. 23

24 Your specialists: Novar GmbH a Honeywell Company Dieselstraße Neuss, Germany Tel.: (Administration) Tel.: (Customer Service) Fax: Internet: info@ackermann-clino.com Honeywell Life Safety Austria GmbH Lemböckgasse Vienna, Austria Tel.: Fax: Internet: hls-austria@honeywell.com Part No. D G0 November 2011 Subject to change without notice Honeywell International Inc.