Q3200 Smart Home Alarm. Kit Content and Installation Guide
|
|
- Joy Short
- 6 years ago
- Views:
Transcription
1 Q3200 Smart Home Alarm Kit Content and Installation Guide
2 Table of Contents 1. Introduction 1 2. Installation 4 3. Troubleshooting & Factory Reset 7 4. Specifications 9 Information and illustrations are subject to change within this document. Blaupunkt reserves the right to alter the specification and product design at anytime without notice.
3
4 1. Introduction This document includes information to help you install and maintain your Q3200 alarm system and its accessory devices. For information about registration and system operation using Blaupunkt Home Connect cloud server. Please refer to Blaupunkt Home Connection User Manual which you can download from server home page Kit Contents Control Panel The Control Panel is the hub of your alarm system. It must be powered on and connected to internet at all times. When an alarm signal is transmitted from accessory devices, the Control Panel will activate its built-in buzzer to raise alarm and report the event to the server, which in turn sends notification to user via or smartphone push notification. The Control Panel is puposedly designed to resemble the appearnce of a speaker and blend in your home environment. Mode LED Status LED Network LED Learn/Reset Button Switch Ethernet Port DC Jack Status LED (Green / Red): Green ON Disarm Mode Green Flash Learning Mode Red ON Away Arm Mode Red Flash Home Arm Mode Off Walk Test Mode Status LED (Amber / Red): Amber ON System has fault Amber Flash AC failure Red Flash System alarming Red ON Alarm Memory Off Normal Network LED (Amber ): Amber ON Network Error Off Normal Learn/Rest Button: Used for learning new device or resetting panel to default. Switch: Slide to ON to activate and charge built-in battery. DC Jack: Connect the DC9V 1A adaptor supplied in the package to power up Control Panel Ethernet Port: Connect to your router 1
5 IMPORTANT NOTE: The Switch is set to OFF by factory default. Please make sure to turn the switch to ON after connecting AC power to the Control Panel, otherwise the battery will not be charged and the Control Panel will be without back up power when power fails. It takes about 72 hours to fully charge the battery. When fully charged, the battery can serve as back-up power source for about 15 hours. Accessories All accessories included in the kit content are pre-linked with Control Panel and do not require manual linking (learning). If learning is required, please refer to the the server user manual. Door Contact The Door Contact is mounted on the Door or Window frame to detect door/window opening. When triggered, it will transmit a signal to Control Panel to alert the condition LED Indicator: The LED will light up if the Door Contact is triggered under tamper open or low battery status to signal fault. Learn / Test Button: The Learn / Test button is used to send signal for learning Door Contact or test range. Tamper Switch: The tamper switch is compressed against door or window frame when installed. When the Door Contact is removed from installed location, or its cover opened, the Tamper Switch will be activated. Rib Mark: The Rib Mark marks the location of the Door Contact s internal magnetic switch to help alignment with the magnet. Magnet LED Indicator Learn/Test Button Rib Mark Tamper Switch Magnet The magnet is mounted on the door and window and should align with the Rib mark when installed. PIR Camera The PIR Camera raises alarm upon detecting intruder and takes 3 pictures to send to user for verification. Parts Identification: LED Indicator / Learn & Test Button: The LED will light up if the PIR Camera detects movement under tamper open or low battery status to signal fault. PIR Sensor: The PIR Sensor has a detection coverage of about 90 to the front. LED Indicator / Learn/Test Button PIR Sensor LED Flashlight Camera Lens 2 Tamper Switch
6 LED Flashlight: The Flashlight provide lighting for image capture under low light condition Camera Lens: The camera lens has coverage of about 60 to the front. Tamper Switch: The tamper switch is located inside the back cover and depressed by bottom screw. It will be activated when the bottom screw is loosened to open back cover. Remote Controller The Remote Controller can be carried with the user to control alarm system mode. You can also use the Panic button on the Remote Controller to activate a Panic alarm at any time regardless of system mode. Parts Identification: LED Indicator: The LED Indicator will light up when the Remote Controller is transmitting signal. Away Arm Button: Press the button to Away Arm the alarm system. Home Arm Button: Press the button to Home Arm the alarm system. Disarm Button: Press the button to Disarm the alarm system Panic Button: Press and hold the button for 3 seconds to activate a Panic alarm. Cover: Insert a coin into the slot and turn counter-clockwise to open the cover and insert battery, then turn clockwise to tighten. Arm Button Emergency Button LED Indicator Disarm Button Home Button Cover System Extension Aside from the devices included in the package, you can further improve the capability of your alarm system by purchasing extra accessories. Such as extra PIR Sensor or Door Contract to extend your protection area; Remote Keypad for a secondary system operation platform; Smoke Detector for fire protection; Temperature Sensor for temperature update; and more Power Switch for energy management and Home Automation. For information about more accessory devices, please visit 3
7 2. Installation Before proceeding to install your accessory devices, you should first complete system registration on Blaupunkt Home Connect server. Please refer to the Quick Start Guide or server user manual to complete the registration process and log into your user account. Signal Range and Walk Test All accessory devices in the Q3200 alarm kit uses wireless radio protocol to communicate with the Control Panel to save you from the extra labour of wiring the device to panel. All devices in the alarm system have an approximate range of 30 meters in typical domestic environment. The range may vary depending on different home condition. Before installing an accessory device, you should test its signal range at selected mounting location first. To test signal range, use the Walk Test function from Blaupunkt Home Connection server, then press the device s test button to transmit test signal. Refer to the server user manual for more info. Home Arm Mode Planning The alarm system functions according to its current Mode, which determines the system behaviour when a sensor is activated. There are 3 modes: Disarm Mode: The system will not activate alarm when a Burglar protection sensor, such as Door/Window Contact, or PIR sensor is triggered. It will only activate alarm if the user does so manually, or a Fire/Water sensor is triggered. Away Arm Mode: The system will activate alarm when any sensor is triggered. Home Arm Mode: The system will only activate Burglar alarm from specific sensors. Sensor set to be ignored under Home Arm mode will not be activated alarm when triggered. With Home Arm mode, you can keep your home perimeter under alert, and still be able to move freely within the house. Home Arm mode allows system to be partially armed by deactivating some sensors under Home Arm mode. Before installation, you should plan ahead and determine which sensor should be deactivated for Home Arm mode. Usually the sensor deployed at home perimeter and entry points, such as Door Contact on the front gate, should be activate all the time. While sensors located in internal space, such as 2 nd floor can be deactivate for Home Arm mode. For more info about Home Arm mode setting, please refer to server user manual. Tamper Protection Your intrusion protection sensor (PIR Camera and Door Contact) are protected from sabotage attempt by a tamper switch, which is triggered when the device cover is opened, or removed from mounted surface. When the tamper switch is triggered, the sensor will transmit signal to Control Panel to alert user that the sensor may be either installed improperly or has been sabotaged. To make sure the tamper switch functions properly, please make sure the switch is fully depressed against the mounting surface when installing your accessory devices. General Device Location Guideline Avoid mounting the Control Panel and devices close to large metal objects or electrical interference source, such as fridge and microwave oven as they could affect signal strength. Wall material also plays a great role in signal penetration efficiency, for example, a brick wall will reduce signal strength a lot more than wooden wall. For devices that has tamper protection function, mount on even surface to ensure the tamper is fully closed when mounted. For uneven surface, use extra packing material on the back. 4
8 Device Location Panning: Door Contact The Door Contact should be mounted as high as possible. Do not aim a PIR sensor directly at this door/window. Remote Controller The Remote Controller is carried with you personally and not installed at fixed location. PIR Camera Mount the PIR Camera at 1.9-2m height for best performance. When mounted at 2m height, the PIR sensor has a range of 12m. PIR Camera detection is most effective when the intruder is moving across its field of view from the sides. Do not mount PIR sensor in a location that faces intruder directly. Do not mount the PIR Camera directly exposed to sunlight, which may affect detection sensitivity. Do not point PIR Camera at window, moving object or sources of heat e.g. fire or boiler. Control Panel The Control Panel should be mounted in a hidden area invisible from outside view. The Control Panel requires Ethernet connect to your router. 5
9 Mounting Door Contact 1. Pull out the plastic battery insulator on the back to activate battery and power on Door Contact. 2. The Door Contact should be mounted on the door/window frame, while the magnet should be mounted on the door/window aligned with the Rib Mark on the Door Contact. The gap between the Door Contact and the magnet should be no more than 15 mm. 3. Choose to install the Door Contact with either screw or adhesive tape Screw Mounting The Door Contact has two knockouts on the inside of the back cover where plastic is thinner for wall mounting. 4. Open the Door Contact back cover to reveal the knockouts, break through the knockouts and use the knockouts to mark position on door or window frame 5. Drill holes into door or window frame at marked location, insert plugs if needed. 6. Screw the back cover into marked location and replace the front cover. 7. Screw the magnet onto the door, the position of the magnet should be aligned with the rib mark on the Door Contact at the same height. If the magnet cannot be placed at same height of Door Contact, a spacer is provided in the package to increase the magnet height. Adhesive Mounting Door/ Window Knockouts Before mounting with double side adehesive tape, you should clean the mounting location with degreaser and make sure there is no cracked paint or uneven surface. 4. Unpeel the cover on the double side adhisive tape, apply the tape to the back of Door Contact, then apply the Door Contact to door or window frame 5. Use another double side adhesive tape to install the magnet on the door/window. Frame Tamper Switch Insulator PIR Camera The PIR Camera has knockouts on the back where plastic is thinner. The 2 center knockouts are for flat wall mounting, and the 4 side knockouts are for corner mounting. 1. Pull out the plastic battery insulator on the back to activate batteries and power on PIR Camera. 2. Open the PIR Camera back cover, break through the knockouts and use the knockouts to mark position on wall or corner. 3. Drill holes into the wall or corner at marked location, insert wall plugs if needed. 4. Screw the back cover into marked location and replace the front cover. Corner Fixing Knockouts x 4 Insulator Surface Fixing Knockouts x 2 6
10 3. Troubleshooting & Factory Reset This chapter covers the potential issues you may encounter during system operation, and factory reset function Control Panel Control Panel Fault Orange LED indicates fault in system, When the LED light up, please login to your Blaupunkt Home Connection Server account to check fault events. The possible fault events include: Control Panel / Devices low battery: -- Change device batteries or charge Control Panel battery accordingly. AC power fail: -- Check AC power connection Sensor out of order: -- Check device battery status and conduct Walk Test to confirm if the Control Panel can receive device signal. Device tamper: -- Close the accessory device tamper switch by checking mounted location and cover screw. Interference: -- Perform Walk Test on all your devices to check if Control Panel can still receive their signals. PIR Camera PIR Camera LED flashes when activated: -- PIR is on low battery or tamper switch triggered. PIR does not respond to movement: -- PIR has a built-in 1 minute sleep timer after detecting a movement. PIR will not redetect movement within 1 minute after it is triggered. Please wait for at least 1 minute before testing PIR again. -- exhausted, please change battery. PIR is slow to respond: -- This is normal. PIR has sophisticated false arm filter setting to prevent accidental trigger. It is also less sensitive when walking directly toward it. PIR give false alarm: -- Make sure pets have no access to protected area. -- Make sure the PIR is not pointed at source of heat or moving objects. Door Contact Door Contact LED flashes when activated: -- Door Contact is on low battery or tamper switch triggered. Door Contact does not respond to door/window opening -- Batteries exhausted, please change battery. -- The magnet is too far away from the Door Contact, please check the gap between the magnet and the Door Contact. Reduce the gap and test the Door Contact again. 7
11 Remote Controller Remote Controller LED glows dimly when any key is pressed -- Remote Controller on low battery. Factory Reset The Factory Reset function will clear all device info and returns all system parameter to default value. After resetting you will need to setup the system by following the instruction in server user manual. 1. Power down Control Panel by disconnecting AC Power and switching off battery switch. 2. Apply AC Power while holding down the button on the back. 3. Keep holding the button for about 5 seconds until the panel emits a long beep and turn on all 3 LEDs. 4. Release button, factory reset is complete. 8
12 4. Specifications All Devices Environmental Condition -10 C to 40 C, relative humidity 85% non-condensing for Control Panel and all devices. Radio Operation Range About 30m in typical domestic installation, range varies depending on building construction, device location, and environment. Control Panel Siren Output 96 dba sound 1m minimum Zones 40 radio devices. Radio Frequency 868MHZ & 2.4 GHz Power Supply DC9V 1A Power Adaptor 4.8V 1100mAH Ni-MH Rechargeable, charge time 72 hours. Backup Time 15 hours PIR Sensor Radio Frequency 2.4 GHz 2 x 1.5V AA alkaline batteries Door Contact Radio Frequency 868MHz 1 x CR2 3V lithium battery Remote Controller Radio Frequency 868MHz 1 x CR2032 3V lithium coin cell 9
13 Compliance Statement Declaration of Conformity This device complies with the requirements of the R&TTE Directive 1999/5/EC and the following harmonized standards have been applied: Health: EN62479:2010 Safety: EN :2006+A11:2009+A1:2010+A12:2011+A2:2013 EMC: EN V1.9.2:2011 EN V1.6.1:2013 EN V2.2.1:2012 Radio: EN V1.8.1:2012 EN V2.4.1:2012 EN V2.4.1:2012 FCC FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). Blaupunkt Competence Center Security & Care Azure Security & Care Corporation 6F., No.1, Lane 250, Sinhu 2nd Rd., Neihu, Taipei 114, Taiwan 10
Q3000 Smart Home Alarm. Kit Content and Installation Guide
Q3000 Smart Home Alarm Kit Content and Installation Guide Table of Contents 1. Introduction 1 2. Installation 4 3. Troubleshooting & Factory Reset 7 4. Specifications 9 Information and illustrations are
More informationSA 2650 Kit User Manual
SA 2650 Kit User Manual Table of Contents 1. System Installation Planning 1 2. Device Introduction 3 3. Getting Started 6 4. System Default Setting 10 5. Connect2Home Application 11 6. System Information
More informationSA 2700 Kit User Manual
SA 2700 Kit User Manual Table of Contents 1. System Installation Planning 1 2. Device Introduction 3 3. First Time Setup 6 4. Mount Devices 7 5. System Default Setting 9 6. User Menu 10 7. Programming
More informationSync. Smart Home Alarm
Sync. Smart Home Alarm Installation Manual IA-30 IA-320 IA-330 IA-340 Thank you for choosing the Yale Sync Smart Home Alarm. This simple to install system has been designed with the user in mind, just
More informationstatus AW1 Plus WiFi Alarm System User Manual
status AW1 Plus WiFi Alarm System User Manual Foreword Congratulations on your purchase of the AW1 Plus Alarm system. Before you commence installation we recommend that you unpack the product, familiarise
More informationpowered by Note: This manual applies to several packages. As such, some parts and some steps may not pertain to the package that you purchased.
MivaLife powered by Note: This manual applies to several packages. As such, some parts and some steps may not pertain to the package that you purchased. 1 Contents TripleShield At A Glance...3 Assemble
More informationALC-PACK3. WiFi Alarm System with HD WiFi Camera. User Manual. Your Watchguard Wireless Security professional:
status ALC-PACK3 WiFi Alarm System with HD WiFi Camera User Manual Your Watchguard Wireless Security professional: www.activeonline.com.au 1300 816 742 Foreword Congratulations on your purchase of the
More informationstatus AW1 WiFi Alarm System Printed in China PA : AW1-UM-EN-V1.0 User Manual 2016 Chuango. All Rights Reserved.
status 2016 Chuango. All Rights Reserved. Printed in China PA : AW1-UM-EN-V1.0 AW1 WiFi Alarm System User Manual Foreword Contents Congratulations on your purchase of the AW1 Alarm system. Before you commence
More informationHSA % wirefree security alarm system. Installation Programming Operating. Helpline Intelligent Security & Fire Ltd
HSA3000 100% wirefree security alarm system Installation Programming Operating Keep in a handy place for reference and for future maintenance Helpline 01902 635998 Introduction General system overview
More informationG4S SMARTalarm User Guide
G4S SMARTalarm User Guide CONGRATULATIONS WITH YOUR NEW SECURITY SYSTEM! We are glad that you have chosen G4S SMARTalarm. G4S is the largest supplier of security solutions in the world. We have invested
More informationLiving. Contents. Smart Home Alarm Kits. Installation Programming Operating. smart. Keep this manual safe for reference and future maintenance
smart Living Smart Home Alarm Kits Installation Programming Operating Keep this manual safe for reference and future maintenance Contents Thank you for choosing the Yale Smart Home Alarm System. This simple
More informationRegister the Gateway via PC. Package Content. Gateway Installation. 1 x Gateway 1 x Voice Siren 1 x IP Camera*
Package Content 1 x Gateway 1 x Voice Siren 1 x IP Camera* Register the Gateway via PC Create a new account at www.elro-smartalarm.com 1. Click on Create a new account 1 x PIR Motion 1 x Magnetic 1 x Remote
More informationabode Web app Functionality
abode Web app Functionality System mode display controls the state of the alarm system. The user can change the mode of the system by simply clicking on the desired mode. When arming the system with the
More informationWIRELESS ALARM SYSTEM WITH TELEPHONE AUTO DIALER
BAT.LOW AC WIRELESS ALARM SYSTEM WITH TELEPHONE AUTO DIALER THE SYSTEM THAT CALLS YOU! Our WIRELESS ALARM SYSTEM WITH TELEPHONE AUTO DIALER is designed to allow you to create your own security system.
More informationSupervised Security System Owner's Guide
Owner's Guide PSC06 READ THIS FIRST This equipment generates and uses radio frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturers instructions,
More informationUSER GUIDE WIRE-FREE HOME PROTECTION SYSTEM AG100+ CONTENTS
CONTENTS USER GUIDE WIRE-FREE HOME PROTECTION SYSTEM AG00 Section Getting started. General system overview. Introduction to the system. Items included with the system. Introduction to the Smart Panel.5
More informationPRODUCT DIAGRAM PACKAGE CONTENTS
PRODUCT DIAGRAM PACKAGE CONTENTS After receiving the product, please inventory the contents to ensure you have all the proper parts, as listed below. If anything is missing or damaged, please contact Monoprice
More informationPRODUCT DIAGRAM PACKAGE CONTENTS
PRODUCT DIAGRAM PACKAGE CONTENTS After receiving the product, please inventory the contents to ensure you have all the proper parts, as listed below. If anything is missing or damaged, please contact Monoprice
More informationOutdoor External Strobe Siren. ADD-ON DEVICE Quickstart Guide. What's inside: 1x Outdoor External Strobe Siren
ADD-ON DEVICE Quickstart Guide Outdoor External Strobe Siren Model No. OSR1300 What's inside: 1x Outdoor External Strobe Siren 1x Power Adapter Mounting Accessories Broadband internet connection, ios or
More informationThinkPro Security and Automation Panel User Guide
ThinkPro Security and Automation Panel User Guide North America s Fastest Growing Alarm Company 1-855-768-4465 (1-855-76-THINK) V.1.1 Welcome to Think Protection Thank you for choosing a Think Protection
More informationPanel XTO210/610/710 GPRS
P r o d u c t S p e c i f i c a t i o n s S h e e t Doc. - Ref. 220-XTO Version : Juin 2013 Description Supervised Wireless Technology The XTO control panel is a Videofied weatherproof, wireless, battery
More informationWith Magictrl, you can control MatiGard anytime & anywhere via your smartphone, even without data network.
MatiGard User Guide 02 Menu Feature-------------------------------------------------------------- 05 Overviews---------------------------------------------------------- 07 Read Before Using-----------------------------------------------
More informationThank you for choosing Ideal Security s Home Security System with Telephone Dialer.
SK618 WIRELESS ALARM SYSTEM WITH AUTO DIALER OWNER'S MANUAL Thank you for choosing Ideal Security s Home Security System with Telephone Dialer. If at any time during your installation you have any questions
More informationTotal Connect Box. User manual
Total Connect Box User manual 1 Congratulations on your purchase of the Honeywell Total Connect Box security system. To make the best out of your system we advise you to read this manual carefully. This
More information1125 PIR Motion Detector
Tamper Survey LED INSTALLATION SHEET 1125 PIR Motion Detector Description The 1125 PIR (Passive Infrared) Motion Detector is a wireless, low current sensor for use with the 1100D Wireless Receiver. Using
More informationNookBox Installation Guide Keypad. Installation Guide. NookBox Keypad (P / E )
1 Installation Guide NookBox Keypad (P119010 / E6309744) 2 NookBox Keypad (P119010 / E6309744) 3 Parts Identification 1. Active LED 2. Status LED 3. Fault Display LED 4. Arm Key 5. Home Key 6. Key Check
More informationNetworX NX-548E Receiver Installation Instructions
NetworX NX-548E Receiver Installation Instructions Content Introduction... 1 Internal mounting... 1 External mounting... 2 Wiring... 3 DIP switch settings... 3 Power up... 3 Programming... 4 Testing and
More information>WIRELESS> ALARM SYSTEM CR200
intrusion >WIRELESS> ALARM SYSTEM CR200 INTRUSION HOME SECURITY CR200 is a Modern, Effective and Versatile 20-zone Household Security System. It is packed with simple Plug & Play functionality, designed
More informationINSTALLATION AND OPERATING MANUAL
INSTALLATION AND OPERATING MANUAL Cloud Wireless Alarm System Access from anywhere, anytime EC DECLARATION OF CONFORMITY DoP N : EM0013 Applicable Products: ERA - HomeGuard ERA - HomeGuard Pro ERA Home
More informationWireless External Alarm
Wireless External Alarm Model: SA-001S User s Instructions TABLE OF content INTRODUCTION... 2 INSTALLATION... 2-4 PROGRAMMING LEARN REMOTE OR SENSORS OR CONTROL PANEL... 4-6 ERASE REMOTE OR SENSOR OR CONTROL
More informationUser Manual. Alarm system: PhoneWatch TC
User Manual Alarm system: PhoneWatch TC Welcome to PhoneWatch Our user manual is designed to support you in the daily use of your alarm system. We recommend that you read the manual in order to fully understand
More informationInstallation Instructions
Indoor/Outdoor PIR Motion Sensors 466-1534G August 2006 Copyright 2006, GE Security Inc. Introduction This is the GE Indoor/Outdoor PIR Motion Sensors Installation Instructions for model numbers: 60-639-95R
More informationPanel XT210/610/ Description. Supervised Wireless Technology
P r o d u c t S p e c i f i c a t i o n s S h e e t Doc. - Ref. 220-XT Version : June 2013 Description The XT control panel is a Videofied wireless, battery operated, hybrid alarm system that is designed
More informationSmart Starter Bundle. Hub. Smart Motion Sensor. Smart Door/ Window Sensor
User Guide 01 Smart IP Camera Smart Zigbee Hub Smart Motion Sensor Smart Door/ Window Sensor Smart Starter Bundle Thanks for using Aztech Kyla product If you need support or help, please visit www.kyla.aztech.com
More informationMOBILE CALL GSM Alarm System User s Manual
MOBILE CALL GSM Alarm System User s Manual Profile For a better understanding of this product, please read this user manual thoroughly before using it. Contents Function Introduction (3) Alarm Host Diagram
More informationIntruder Alarm Kit IA-210 IA-220 IA-230
Intruder Alarm Kit IA-210 IA-220 IA-230 Full User Manual Quick Start Guide The smarter way to protect your home. 1 Thank you for choosing the Yale Intruder Alarm System. This simple to install system has
More informationGSM RFID VOICE Alarm System
GSM RFID VOICE Alarm System User s Manual For a better understanding of this product, please read this user manual thoroughly before using it. CONTENTS [Function Instruction] [Control Panel] Control Panel
More informationAdvisor Advanced Mobile Application User Manual
Advisor Advanced Mobile Application User Manual Content Warnings and Disclaimers 2 Advanced Mobile 2 Contact information 2 Description 2 Screen navigation 4 Gestures 4 Menu 4 Help navigation 4 Login 5
More informationD-TECT 3 IP. GJD260 IP Motion Detector
D-TECT 3 IP GJD260 IP Motion Detector PACKAGE CONTENTS 1 x D-TECT 3 IP 1 x Drilling template for fixing holes 3 x 31.75mm wall plugs 3 x 31.75mm screws 2 x Spare sliding curtains 2 x Tamper feet 1 x Tamper
More informationUSER MANUAL QSDL503AD Intelligent Auto-Dial Alarm System
USER MANUAL QSDL503AD Intelligent Auto-Dial Alarm System Rev 10.28.2009 TABLE OF CONTENTS Section 1: USAGE... 1 Section 2: FEATURES... 1 Section 3: PACKAGE CONTENTS... 1 Section 4: SYSTEM INSTALLATION...
More informationQuick Installation Manual LED Touch Keypad Autodial Wireless Alarm System
Quick Installation Manual LED Touch Keypad Autodial Wireless Alarm System By shield4u http:// (Version 20110816) A. Alarm Understanding Away Disarm Home Emergency Function Signal Interpretation Buzzer
More informationHSD-200Z Z-Wave Motion Sensor
HSD-200Z Z-Wave Motion Sensor The HSD-200Z is a Z-Wave TM enabled device and is fully compatible with any Z-Wave TM enabled network. Z-Wave TM enabled devices displaying the Z-Wave TM logo can also be
More informationD3D Wi-Fi GSM Smart Alarm System -User Manual
D3D Wi-Fi GSM Smart Alarm System -User Manual D3D Wi-Fi / GSM Smart Alarm system (Model : D10). Please read all instructions carefully & follow steps for easy home installation. 1 P a g e D3D Wi-Fi / GSM
More informationK1 SMARTHOME DIY KIT
K1 SMARTHOME DIY KIT EN DE FR NL ES USER MANUAL PT IT Contents 1. Things to Note before Getting Started 1 2. How the K1 System Works 2 3. Included in Your K1 Smart Home System 5 4. Device Overview 5 5.
More informationHSA6500 GSM alarm. Installation Programming Operating. Keep this manual safe for reference and future maintenance. Contents
HSA6500 GSM alarm Installation Programming Operating Keep this manual safe for reference and future maintenance Introduction Contents Thank you for choosing the Yale Wireless Alarm System. This simple
More information1126 Series Ceiling Mount PIR Motion Detector
Installation Sheet 1126 Series Ceiling Mount PIR Motion Detector Description The 1126 Series PIR (Passive Infrared) Motion Detectors are a compact wireless PIR. The 1126 Series offer 360, Wide Angle, or
More informationEasy Fit Touch Screen alarm system (EF-Panel)
Easy Fit Touch Screen alarm system (EF-Panel) Installation Programming Operating Keep this manual safe for reference and future maintenance Introduction Contents Thank you for choosing the Yale Wireless
More informationSystème de sécurité domestique ismartalarm. ismartalarm Home Security System MANUEL DUPROPRIÉTAIRE OWNER S MANUAL
ismartalarm Home Security System OWNER S MANUAL Système de sécurité domestique ismartalarm MANUEL DUPROPRIÉTAIRE ismartalarm Home Security System OWNER S MANUAL Table of Contents INTRODUCTION PACKAGE CONTENTS
More informationSafety, security, comfort. It s in your hands. evohome security. Smart, wireless security and safety that connects to your home.
Safety, security, comfort. It s in your hands.. Smart, wireless security and safety that connects to your home. P2 Safety, security, comfort. Welcome to your smart, wireless security and safety system.
More informationWiFi + PSTN. Smart Home Alarm System
WiFi + PSTN Smart Home Alarm System Content Preface Specifications Technical information Front side panel view Back side panel view Initialization APP names Add alarm host and connect WiFi for host How
More informationXHS1-TY / MP-841 ZigBee Home Automation 1.2 Wireless Digital Pet Immune PIR Detector
XHS1-TY / MP-841 ZigBee Home Automation 1.2 Wireless Digital Pet Immune PIR Detector Installation Instructions 1. INTRODUCTION The XHS1-TY or MP-841 (pet immune) is a microprocessor-controlled wireless
More informationHigh-End Wireless Security
PRODUCT CATALOGUE High-End Wireless Security The sophisticated iconnect system, with its sleek design, serves as the command center for a residential and small commercial Security and Home Automation network.
More informationSmart Home Security Gateway Series
Secure Your Way of Life Smart Home Security Gateway Series Transforming Your Life Smart Home Security Gateway Brochure 2018 Contents About Climax Home Security Features Home Portal Server & Intuitive User
More informationDIY Smart Home Security Kit 18-K1
DIY Smart Home Security Kit 18-K1 DIY Smart Home Security Kit The award winning Smanos 18-K1 is an integrated wireless Smart Home and security gateway that combines butler and guard type functions into
More informationAG HOME ALARM Quick Start Guide
AG400011 HOME ALARM Quick Start Guide Step 1 Power on and SIM Card Installation 1. Remove battery cover of the alarm panel. 2. Insert a SIM card into the slot and connect the Li-ion cell 2000mAh 3.7V and
More informationOffer your customers a high end solution for a low end price. Complete alarmsystem with integrated 24/7 camera surveillance Immediate Push Alarm on mobile phone including photo and video-recording Camera
More informationPet Immune SAW PIR Motion Sensor
PET Immune SAW PIR Motion Sensors Installation Sheet Description This is the Installation Sheet for SAW PIR and PET Immune Motion Sensors. See Table 1. Table 1: Motion Sensors 60-807-95R 60-807-01-95R
More informationINSTRUCTION MANUAL FOR: WIRELESS SECURITY STARTER KIT MODEL NO: SWSKIT
INSTRUCTION MANUAL FOR: WIRELESS SECURITY STARTER KIT MODEL NO: SWSKIT B. Operation i. Powering up the Key Fob Remote Control ii. Enrolling the Remote Control onto the Smart Panel iii. Operating the Key
More informationWireless Keypad GKP-S8M
Wireless Keypad GKP-S8M User manual Contents Congratulations on your purchase of this Honeywell wireless keypad. To make the best out of your equipment we advise you to read this manual carefully. This
More informationPremium 8 Zone Wireless Alarm Kit
Premium 8 Zone Wireless Alarm Kit INTRODUCTION The wireless alarm system is designed to protect your home. It is a simple to use, easy to install unit. No special tools or training are required, all fixings
More informationCONTENTS. (User s Manual)
CONTENTS (User s Manual) 1. Foreword & Main Features & Brief introduction of the Product 2. Understanding of Alarm Host 3. Specifications 4. Type and definition of Defense Line 5. Programming the alarm
More informationAlarm Getting Started
Alarm Getting Started What s in your Ring Alarm Kit Contents 1. Connect Base Station Ring Motion Detector Ring Keypad 2. Set up devices 3. Start with Security 4. Explore 5. Troubleshooting Ring Base Station
More informationCPVan Home Alarm Starter Kit
CPVan Home Alarm Starter Kit For CPVan Home Alarm System Box contents IMPORTANT: Please also refer to www.cpvans.com for further information and technical assistance. We are improving our site continuously
More informationControl Panel-Based Alarm System Installation Programming Operating Keep this manual safe for reference and future maintenance
Control Panel-Based Alarm System Installation Programming Operating Keep this manual safe for reference and future maintenance Introduction Contents General System Overview Thank you for choosing the Yale
More informationWireless Keypads LKP(E)S8M Series
Wireless Keypads LKP(E)S8M Series User manual Contents Congratulations on your purchase of this Honeywell wireless keypad. To make the best out of your equipment we advise you to read this manual carefully.
More informationSmart Home Security Gateway Series
Secure Your Way of Life Smart Home Security Gateway Series Transforming Your Life Smart Home Security Gateway Brochure 2018 Climax s Smart Home Security Gateway Solutions The Safest Smart Home Contents
More informationSecure Your Way of Life. Now Compa ble With. Vesta Smart Security Solution ML Series
Secure Your Way of Life Now Compa ble With Vesta Smart Security Solution ML Series A new generation of ML control panel series is an integrated and comprehensive system that manages safety, security and
More informationEXPANDABLE SMART HOME SECURITY KIT
EXPANDABLE SMART HOME SECURITY KIT SKU Code: SHA5108 SMART HOME AUTOMATION WITH SECURITY ALARM & OUTDOOR SIREN (2 way RF 868Mhz communication). ALL MANAGED VIA 1 APP ON YOUR SMARTPHONE Indoor IP Camera
More informationUSER GUIDE WIRE-FREE HOME PROTECTION SYSTEM WS-500X CONTENTS REV: 0.2 ERP P/N: ERP 机型 :SS21W2R-AU-EDP09940A-V1
ERP 机型 :SSWR-AU-EDP0990A-V ERP P/N: REV: 0. 描述 : A:SSWR/WS-500X,EDP099,REV.A 5 0MM 80g,,"WS-500X" RoHS.0 Reach Designer:Sunny Date:07-09- CONTENTS USER GUIDE WIRE-FREE HOME PROTECTION SYSTEM WS-500X Section
More informationWICOMM. Reference Manual
WICOMM Reference Manual Table of Contents 1. INTRODUCTION... 4 EXPANDING YOUR SYSTEM... 4 SELF-INSTALLATION... 4 2. SYSTEM COMPONENTS... 5 WHAT'S INCLUDED IN THE KIT... 5 OPTIONAL DEVICES... 6 SERIAL NUMBERS...
More informationK1 SMARTHOME DIY KIT
K1 SMARTHOME DIY KIT EN DE FR NL ES QUICK GUIDE PT IT Contents 1. Things to Note before Getting Started 3 1.1 High-speed WiFi Internet Connection 3 1.2 SSID and Password 4 1.3 Operating System Requirements
More informationWiFi GSM APP Smart Home Security System
User Manual WiFi GSM APP Smart Home Security System Tips: Please read through this user manual before installation so as to operate properly. Please keep well of the user manual for further reference.
More informationPiSector GSM Cellular Wireless Alarm System
PiSector GSM Cellular Wireless Alarm System User Manual ( GS08 ) Read manual fully before use. PiSector Inc., USA, www.pisector.com Welcome to PiSECTOR Thank you for choosing PiSECTOR. Everyone at PiSECTOR
More informationSHEPHERD. Smart solutions to protect and manage what matters the most to you
SHEPHERD Smart solutions to protect and manage what matters the most to you Security Shepherd Gateway & Keypad, Repeater, PIR Detectors, PIR Camera, Magnet, Glass Break, Siren 1-10 Safety & Air Quality
More informationDigijock Home Security
Digijock Home Security User Manual Congratulations on your purchase! The Digijock Home Security is a wireless alarm system that will protect your home or your small business from fire and burglary. Consisting
More informationAlarm System SECURE AS 302
Alarm System SECURE AS 302 Operating Manual SECURE Light app now available! Table of Contents Before You Start.................................. 4 User Information....................................4
More informationINSTALLATION AND USER MANUAL SG2. GSM+WiFi. Alarm Security System
INSTALLATION AND USER MANUAL GSM+WiFi Alarm Security System SG2 SIM Features - 16-bit high speed processor, reliable capability - 100% wireless D.I.Y. - Built-in 1,000,000 RF codes - Supports 10 remote
More informationKwêBeams Effective wire free outdoor early warning system
1 KwêBeams Effective wire free outdoor early warning system Features: - Easy to install & use - Operates on 868Mhz frequency (less congested to avoid signal jamming) - All sensors with built in sirens,
More informationWIRELESS ALARM SYSTEM CR200 >SMART GPRS INTRUSION DETECTION PLUG & PLAY FUNCTIONS SELF-LEARNING, SMART FEATURES TEXT ZONE NAMING
>SMART GPRS WIRELESS ALARM SYSTEM CR200 INTRUSION PLUG & PLAY FUNCTIONS SELF-LEARNING, SMART FEATURES TEXT ZONE NAMING INTRUSION HOME SECURITY CR200 is a smart GPRS modern, effective and versatile 30-zone
More informationCaddx Installation Instructions Package
Caddx Installation Instructions Package This package includes instructions for the following Caddx products: NetworX NX-E Series Receiver Modules NX-408E & NX-408E-I, NX-416E & NX-416E-I, NX-448E & NX-448E-I
More informationNow Compa ble With. VL Touchscreen Alarm. Crafted Touchscreen Security System that Revolutionizes Your World. illi tl C
Now Compa ble With VL Touchscreen Alarm V AB Brilliantly illi tl C Crafted Touchscreen Security System that Revolutionizes Your World Crafted with Incredible Intelligence Introducing the new VL touchscreen
More informationYALE SECURE CONNECT. Delivering a premium digital locking solution with flexible control and peace of mind.
YALE SECURE CONNECT Delivering a premium digital locking solution with flexible control and peace of mind. i An ASSA ABLOY Group brand Yale Secure Connect delivers a premium digital locking solution with
More informationDescription Supervised Wireless Technology PRODUCT SPECIFICATION SHEET
PRODUCT SPECIFICATION SHEET Made by RSI VIDEO TECHNOLOGIES 2200-XLSP February 2012 Description is a Videofied wireless, battery operated security system. The control panel is designed for residential and
More information2 x CR123A Lithium batteries. White night-light LED. Blue alarm LED - also glows behind the lens. Ambient light sensor behind lens.
15m x 15m wide angle coverage Look down Creep Zone White LED motion activated night-light Adjustable Pulse Count Adjustable Range High R.F. and E.S.D. immunity High white light immunity SAWR stabilised
More informationIDS816 User Manual H Issued January 2009
1 Contents Glossary-------------------------------------------------------------------------------------------------------------------6 1. Introduction to the IDS 816---------------------------------------------------------------------------7
More informationWi-Fi 3-IN-1 Trio Sensor
Wi-Fi 3-IN-1 Trio Sensor (WTS3100) User Manual home8alarm.com 1-844-800-6482 support@home8alarm.com Table of Contents Chapter 1. Introduction... 2 1.1 System Requirements... 3 Chapter 2. Hardware Overview...
More informationSonic Safety. Sonic Safety. Wireless Safety and Security System. HG-1500 System. For System Package OWNER S MANUAL
Sonic Safety Sonic Safety Wireless Safety and Security System HG-1500 System For System Package OWNER S MANUAL Table of Contents Introduction (HG-1500).. 3 System Package. 3 Optional Accessories.. 3 Deployment
More informationEWP2WIRELESS MOTION DETECTOR
EN EWP2WIRELESS MOTION DETECTOR User manual v1.2 Compatible with: ESIM364 v02.08.00 and up. EPIR3 v1.2.0 and up EPIR2 v01.03.02 and up Main features: Built-in dual element passive infrared (PIR) sensor.
More informationF1 Smart Home Security Sensors. Unlocking the Potential of Your Wireless World
F1 Smart Home Security Sensors Unlocking the Potential of Your Wireless World Contents F1 Smart Home Security Sensors Introduction Live Visual Monitoring Sensor Motion Sensor Shock / Vibration & Glass
More informationwww.eraeverywhere.com ERA Home Security Straight Road, Short Heath, Willenhall, West Midlands, WV12 5RA email: alarms @ eraeverywhere.com Customer Helpline: 0345 257 2500 Vault_V1.0_3616 IMPORTANT Table
More informationWireless Alarm system s manual
MOUNTVIEW TECH AUSTRALIA PTY LTD Wireless Alarm system s manual ADS ECO GSM320 Series ADS Security 1/11/2011 1. Before You Begin For your safety and the safety of others, and to ensure that you get the
More informationExternal Wireless Sounder
External Wireless Sounder Model: WL RWS401 Installation and Programming Instructions Table of Contents Introduction... 3 Operational Functions... 3 Alarm / Tamper Indication... 3 Low Battery Indication...
More informationVcare. User Manual. Ver WiFi - GSM- App. Smart Home Security System
Vcare User Manual Ver.20161126 WiFi - GSM- App Smart Home Security System Tips:. Carefully read through this user manual prior to installation. Keep the user manual in a safe place for future reference
More informationREAD ME FIRST DIY WIRELESS ALERT. Driveway Alert Kit. Instruction Manual
READ ME FIRST DIY WIRELESS ALERT Driveway Alert Kit EN Instruction Manual 2 About this Manual The content in this manual is for information purposes only and is subject to change without notice. While
More informationInstallation and Operation Guide EXTERNAL SIREN
EXTERNAL SIREN CTENTS 01. INTRODUCTI 03 02. INSTALLATI ATI 04 2.1. Installing the External Siren on the Active SmartHome 04 2.2. Power Supply 07 2.3. Mounting the External Siren 08 03. OPERATI 11 3.1.
More informationZerio Plus EDA-D6000 Radio Combined Heat Detector and Sounder Installation Instructions
Zerio Plus EDA-D6000 Radio Combined Heat Detector and Sounder Installation Instructions EN54-3:2001+A1:2002+A2:2006 EN54-5:2000+A1:2002 EN54-25:2008 0359 Electro Detectors Ltd. Electro House Edinburgh
More informationWireless Devices. This chapter introduces the suite of DSC wireless sensors and devices used with the Impassa and other series of DSC alarm systems
Wireless Devices This chapter introduces the suite of DSC wireless sensors and devices used with the Impassa and other series of DSC alarm systems ALARM DETECTORS WS4945 DOOR/WINDOW SENSOR The WS4945 is
More information1. Introduction. 2. Product overview
1. Introduction The AG400011 GSM Alarm panel is a control panel that is compatible with other H-net security devices from Everspring, such as wireless sensors, remote keyfobs, tags, and keypad. With this
More informationS3 Sim Secual Alarm system with GSM transmitter
S3 Sim Secual Alarm system with GSM transmitter www.etiger.com Features Control Panel Layout (Back) - ARM CPU + Auror CPU - GSM frequency: 850 / 900 / 1800 / 1900 MHz, suits all phones - Supports up to
More informationExternal Wireless Sounder
External Wireless Sounder WL S50 Installation and Programming Instructions 2 Wireless Sounder Instructions Table of Contents Introduction... 4 Operational Functions... 4 Alarm / Tamper Indication...4 Low
More information