FAP-420/FAH-420 Automatic Fire Detectors LSN improved version

Transcription

1 Fire Alarm Systems FAP-420/FAH-420 Atomatic Fire s LSN improved version FAP-420/FAH-420 Atomatic Fire s LSN improved version Combination of optical, thermal and chemical sensors with intelligent evalation electronics. Earliest detection of lightest smoke (TF1 & TF9) with the doble-optical smoke detectors featring Dal-Ray technology properties adapted to cater for room sage Drift compensation in optical and gas measrement section Maintains LSN loop fnctions in the event of wire interrption or short-circit thanks to two integrated isolators The 420 Series Atomatic Fire s offer a sperb accracy as well as detection speed and precision. The versions with dal-optical sensor (DO-detectors: FAP-DO420, FAP-DOT420, FAP-DOTC420) are able to detect lightest smoke (TF1 and TF9). These detectors provide all advantages of LSN improved version. The addressing of the detectors can be configred with the integrated trning switches. System overview Operating mode type Thermal differential (+ optical) Operating mode FAP OTC 4 20 x x - x - - FAP OT 42 0 type FAP O 420 (KKW) FAH T 420 (KKW) Combined x x - - Optical x x x - FAP-DOTC420 FAP-DOT420 FAP-DO420 Combined x x - Optical x x x Dal-Optical x x x Thermo-max. x x - Dal- Optical Thermomax x x - x

2 2 FAP-420/FAH-420 Atomatic Fire s LSN improved version Thermal differentia l (+ optical) Fnctions x x - x x Sensor technology and signal processing The individal sensors can be configred manally or timer-based via the LSN network. All sensor signals are analyzed continally by the internal evalation electronics (Intelligent Signal Processing ISP) and are linked with each other via an inbilt microprocessor. The link between the sensors means that the combined detectors can also be sed where light smoke, steam or dst mst be expected dring the corse of normal operation. Only if the signal combination corresponds to that for the programming of the selected sage site field code will the alarm be triggered atomatically. This reslts in a higher level of secrity against false alarms. In addition, the time of the sensor signals on fire and falt detection is analyzed, reslting in an increased detection reliability for each individal sensor. In the case of the optical and chemical sensor, the response threshold (drift compensation) is actively adjsted. Manal or time-controlled switch-off of individal sensors is reqired for adjstment to extreme interference factors. Optical sensor (smoke sensor) The optical sensor ses the scattered-light method. An LED transmits light to the measring chamber, where it is absorbed by the labyrinth strctre. In the event of a fire, smoke enters the measring chamber and the smoke particles scatter the light from the LED. The amont of light hitting the photo diode is converted into a proportional electrical signal. The DO detectors se two optical sensors with different wavelength. The Dal Ray Technology works with an infrared and a ble LED, so that light smoke can be detected reliably (TF1 and TF9 detection). Thermal sensor (temperatre sensor) A thermistor in a resistance network is sed as a thermal sensor, from which an analog-digital converter measres the temperatre-dependent voltage at reglar intervals. Depending on the specified detector class, the temperatre sensor triggers the alarm stats when the maximm temperatre of 54 C or 69 C is exceeded (thermal maximm), or if the temperatre rises by a defined amont within a specified time (thermal differential). sensor (CO gas sensor) The main fnction of the gas sensor is to detect carbon monoxide (CO) generated as a reslt of a fire, bt it will also detect hydrogen (H) and nitros monoxide (NO). The sensor signal vale is proportional to the concentration of gas. The gas sensor delivers additional information to effectively sppress deceptive vales. Since the service life of the gas sensor is limited, the C sensor of the FAP DOTC420 detector shts down atomatically after 6 years of operation, and the C sensor of the FAP OTC 420 detector after 5 years of operation. The FAP DOTC420 detector will then still operate as a DOT detector and the FAP OTC 420 detector as an OT detector. The detectors shold be exchanged immediately in order to keep the higher detection reliability of the DOTC/OTC versions. Improved LSN featres The 420 Series Fire s offer all the featres of the improved LSN technology: Flexible network strctres, inclding "T tapping" withot additional elements Up to 254 LSN improved elements per loop or stb line Atomatic or manal detector addressing selectable via rotary switch, in each case with or withot atodetection Power spply for connected elements via LSN bs Unscreened fire detection cable can be sed Cable length p to 3000 m (with LSN 1500 A) Downwards compatibility to existing LSN systems and central nits LSN featres Operating data display In addition, the FAP/FAH-420 detectors offer all the established benefits of LSN technology. The RPS programming software can be sed to change the detection characteristics of the respective room tilization. In addition, each configred detector, with the exception of the KKW, can provide the following data: Serial nmber, Contamination level of the optical section, Operating hors, Crrent analog vales. Analog vales: Optical system vales: crrent measred vale of the scattered light sensor; the measring range is linear and covers from 170 (new) to 700 (dirty). Contamination: the contamination vale shows how mch the crrent contamination vale has increased relative to the original condition. CO vale: display of the crrent measred vale (max. 550). Self-monitoring of sensor technology The sensor is self-monitoring. The following errors are indicated on the fire panel: Falt indication in the event of the failre of the detector electronics Continos display of contamination level dring service Falt indication if heavy contamination is detected (in place of false alarms)

3 3 FAP-420/FAH-420 Atomatic Fire s LSN improved version In the event of wire interrption or short-circit, integrated dividing elements maintain the fnctional secrity of the LSN loop. In the event of an alarm, individal detector identification is transmitted to the fire panel. Frther performance characteristics The detector alarm indication takes the form of a red flashing LED that is easily visible 360. It is possible to activate a remote external detector alarm display. The detector base no longer has to be directed de to the centralized position of the individal display. The integrated strain relief for interfloor cables prevents the removal of cables from the terminal after installation. The terminals for cable cross-sections p to 2.5 mm 2 are very easily accessible. The detector bases have a mechanical removal lock (can be activated/deactivated). The detectors have a dst-repellent labyrinth and cap constrction. Certifications and approvals The detectors comply with: EN 54-7: 2000/A2 (2006) EN 54-5: 03/2001 only detectors with thermal sensor EN 54-17:2005 pren 54-29: 2008 only FAP-DOT420, FAP-DOTC420 CEA 4021:07:2003 Region Certification /01 FAP-O420 Germany G FAP-OTC 420_G G FAP-OT 420_G G FAP-O 420_G G FAH-T 420_G G FAP-O 420 KKW_G G FAH-T 420 KKW_G G FAP-DOTC420 G FAP-DO420 G FAP-DOT420 Erope CE FAP-O420/FAP-OT420/FAP-OTC420/ FAH-T420 CE CE CE FAP-DO420/FAP-DOT420/FAP- DOTC420 FAP-/FAH-420 KKW FAP-/FAH-420/FAA-MSR420/FAA-MS- R-SP FAP-O FAP-OT FAP-OT FAP-OTC 420 Region Certification FAP-OTC FAP-O 420 KKW FAP-OT 420 KKW FAP-OT 420 KKW FAH-T 420 KKW FAH-T FAP-DOTC FAP-DOT FAP-DO420 Poland CNBOP 2567/2007 FAP-O420 CNBOP CNBOP CNBOP 2568/2007 FAH-T /2007 FAP-OT /2007 FAP-OTC420 Hngary TMT TMT-17/ FAP-O 420, FAP-O 420 KKW TMT TMT TMT-18/ FAH-T 420, FAH-T 420 KKW TMT-19/ FAP-OT 420, FAP- OT 420 KKW, FAP-OTC 420 Ukraine UA FAP-OTC420 Installation/configration notes UA FAP-OT420 UA FAP-DO420 UA FAP-DOT UA FAP-DOTC UA FAP- O420_MS400 _MSF400_FAA-420-RI UA FAH- T420_MS400_MSF400 Connectable to the fire panels FPA 5000 and FPA 1200 with the improved LSN system parameters Yo can se the DO detectors only with the Panel Controller MPC version B and higher. The Panel Controller MPC xxxx A cannot be sed. In "Classic Mode" connectable to the LSN fire panels BZ 500 LSN, UEZ 2000 LSN, UGM 2020 and to other panels or their receiver modles with identical connection conditions, althogh with the previos LSN system parameters Dring planning works, it is essential to adhere to national standards and gidelines. The detector can be painted (cap and base) and thereby adapted to the srronding color scheme. Note the information in the Painting Instrctions (Docment Nmber F.01U ).

4 4 FAP-420/FAH-420 Atomatic Fire s LSN improved version Installation/configration notes in accordance with /VDE The FAP DOTC420, FAP DOT420, FAP OTC 420, and FAP OT 420 types are planned in accordance with the gidelines for optical detectors if operated as optical detectors or as combined optical/thermal detectors (see DIN VDE 0833 Part 2 and VDS 2095) If occasional disconnection of the optical nit (scattered light sensor) is reqired, planning mst be based on the gidelines for heat detectors (see DIN VDE 0833 Part 2 and VDS 2095) When planning fire barriers according to DIBt, note that the FAH T 420 (KKW) mst be configred in accordance with class A1R. Parts inclded type Qty. Components FAP-DOTC420 1 Mltisensor Dal-Optical, Thermal, FAP-OTC Mltisensor Optical/Thermal/ FAP-DOT420 1 Mltisensor Dal-Optical, Thermal FAP-OT Mltisensor Optical/Thermal FAP-DO420 1 Dal-Optical Smoke- FAP-O Optical Smoke FAH-T Heat (Thermal Differential/ Thermal Maximm) FAP-O 420 KKW 1 Optical Smoke * FAH-T 420 KKW 1 Heat (Thermal Differential/ Thermal Maximm) * * For se in areas with increased radioactive radiation Technical specifications Electrical Operating voltage Crrent consmption Alarm otpt Indicator otpt Mechanics Dimensions 15 V DC to 33 V DC < 0.55 ma Per data word by two-wire signal line Open collector connects 0 V over 1.5 kω throgh, max. 15 ma Weight Material Plastic, ABS (Novodr) Color White, similar to RAL 9010, matt finish Withot / With packaging FAP-DOTC 420 Approx. 80 g / Approx. 135 g FAP-DOT 420, FAP DO 420 Approx. 75 g / Approx. 125 g FAP-OTC 420 Approx. 80 g / Approx. 125 g FAP-OT 420, FAP O 420, FAP O 420 KKW, FAH T 420, Environmental conditions Permissible operating temperatre FAP-DOTC420 FAP-OTC 420 FAP-DOT420 FAP-OT 420 FAH-T 420 FAP-DO420 FAP-O 420 FAP O 420 KKW Permissible storage temperatre Approx. 75 g / Approx. 115 g -10 C to +50 C -20 C to +50 C -20 C to +65 C FAP-DOTC C to +50 C FAP-DOT C to +80 C FAP-DO C to +80 C Permissible relative hmidity Permissible air speed Protection class as per EN Frther characteristics Response sensitivity 95% (non-condensing) 20 m/s. IP 40, IP 43 detector base with damp room seal Optical part In accordance with EN 54 T7 (programmable) Thermal maximm part > 54 C / >69 C Hosing Withot base Ø 99.5 x 52 mm With base Ø 120 x 63.5 mm Thermal differential part: FAH-T 420, A2S / A2R / A1 / A1R / BS / BR, in line with EN 54 5 (programmable)

5 5 FAP-420/FAH-420 Atomatic Fire s LSN improved version Thermal differential part: FAP DOTC420, FAP DOT420, FAP OTC420, FAP OT420 A2S / A2R / BS / BR, in line with EN 54 5 (programmable) FAP OTC 420 Mltisensor Optical/Thermal/ analog addressable detector with optical, thermal and chemical sensor Order nmber FAP-OTC 420 Gas sensor In ppm range Individal display Color code LED red FAP-DOTC420 2 yellow concentric loops FAP-OTC 420 Yellow loop FAP-DOT black concentric loops FAP-OT 420 Black loop FAP-DO420 2 gray concentric loops FAP-O 420, FAP O 420 KKW FAH-T 420, Planning Monitoring area FAP DOTC 420, FAP DOT 420, FAP DO 420, FAP OTC 420, FAP OT 420, FAP O 420 FAH-T 420 Maximm installation height FAP DOTC 420, FAP DOT 420, FAP DO 420, FAP OTC 420, FAP OT 420, FAP O 420, FAP O 420 KKW FAH-T 420, Ordering information No marking Red loop Max. 120 m 2 (Heed local gidelines!) Max. 40 m 2 (Heed local gidelines!) 16 m (Heed local gidelines!) Max. 16 m (Heed local gidelines!) Max. 7.5 m (Heed local gidelines!) FAP O 420 Optical Smoke analog addressable detector with optical sensor Order nmber FAP-O 420 FAP OT 420 Mltisensor Optical/Thermal analog addressable detector with optical and thermal sensor Order nmber FAP-OT 420 FAH T 420 Heat analog addressable heat detector with thermal sensor (differential/thermal maximm) Order nmber FAH-T 420 FAP O 420 KKW Optical Smoke analog addressable detector with optical sensor for se in areas with increased radioactive radiation Order nmber FAP-O420-KKW FAH T420 KKW Heat analog addressable heat detector (thermal differential and maximm) for se in areas with increased radioactive radiation Order nmber FAH-T420-KKW FAP-DO420 Dal-Optical Smoke analog addressable detector with two optical sensors Order nmber FAP-DO420 FAP-DOT420 Mltisensor Dal-Optical, Thermal analog addressable detector with two optical and one thermal sensor Order nmber FAP-DOT420 FAP-DOTC420 Mltisensor Dal-Optical, Thermal, analog addressable detector with two optical, one thermal and one chemical sensor Order nmber FAP-DOTC420 Accessories MS 400 B Base Bosch-branded detector base for srface monted and flsh-monted cable feed Order nmber MS 400 B MS 400 Base base for srface monted and flsh-monted cable feed, not branded. Order nmber MS 400 MSC 420 Additional Base with Damp Room Seal for srface-monted cable feed Order nmber MSC 420 FAA-420-SEAL Damp Room Seal 1 package = 10 pieces Order nmber FAA-420-SEAL FAA MSR 420 Base with Relay with a change-over relay (Form C) Order nmber FAA-MSR 420

6 6 FAP-420/FAH-420 Atomatic Fire s LSN improved version MS 420 LSN Base with Spring With integrated jmper elements that preserve the loop fnction if the detector is removed Order nmber MS 420 FNM-420-A-BS-WH Base Sonder Indoor, white analog addressable base sonder for indoor se, white Order nmber FNM-420-A-BS-WH MSS 401 LSN Base Sonder White for direct connection to the LSN with direct separate power spply Order nmber MSS 401 SSK 400 Protective Dst Cover (packing nit = 10 nits) Order nmber SSK 400 TP4 400 Spport Plate for Identification (packing nit = 50 nits) Order nmber TP4 400 TP8 400 Spport Plate for Identification (packing nit = 50 nits) Order nmber TP8 400 SK 400 Protective Basket prevents damage Order nmber SK 400 MH 400 Heating Element sable at locations where the fnctional safety of the detector might be impaired by condensation Order nmber MH 400 WA400 Console Console for DIBt compliant monting of detectors above doors etc., inclding detector base Order nmber WA400 Monting Bracket for Fire s on False Floor Stilts Order nmber FMX-DET-MB

7 7 FAP-420/FAH-420 Atomatic Fire s LSN improved version FAP-DOTC420 Mltisensor Dal-Optical, Thermal, FAP-DOT420 Mltisensor Dal-Optical, Thermal FAP-DO420 Dal- Optical Smoke FAP OTC 420 Mltisensor Optical/Thermal/ FAP OT 420 Mltisensor Optical/Thermal type Dal-optical/thermal/ chemical Dal-optical/thermal Dal-optical optical/thermal/ chemical optical/thermal Operating voltage 15 V DC V DC 15 V DC V DC 15 V DC V DC 15 V DC V DC 15 V DC V DC Crrent consmption < 0.55 ma < 0.55 ma < 0.55 ma < 0.55 ma < 0.55 ma Protection category Permissible operating temperatre -10 C C -20 C C -20 C C -10 C C -20 C C Monitoring area max. 120 m² max. 120 m² max. 120 m² max. 120 m² max. 120 m² Maximm installation height Use in areas with increased radioactive radiation 16 m 16 m 16 m 16 m 16 m Color code 2 yellow loops 2 black loops 2 gray loops yellow loop black loop FAP O 420 Optical Smoke FAH T 420 Heat FAP O 420 KKW Optical Smoke FAH T420 KKW Heat type optical thermal differential/ thermal maximm optical thermal differential/ thermal maximm Operating voltage 15 V DC V DC 15 V DC V DC 15 V DC V DC 15 V DC V DC Crrent consmption < 0.55 ma < 0.55 ma < 0.55 ma < 0.55 ma Protection category Permissible operating temperatre -20 C C -20 C C -20 C C -20 C C Monitoring area max. 120 m² max. 40 m² max. 120 m² max. 40 m² Maximm installation height 16 m 7.5 m 16 m 7.5 m

8 8 FAP-420/FAH-420 Atomatic Fire s LSN improved version FAP O 420 Optical Smoke FAH T 420 Heat FAP O 420 KKW Optical Smoke FAH T420 KKW Heat Use in areas with increased radioactive radiation Color code no marking red loop no marking red loop Represented by: Erope, Middle East, Africa: Germany: North America: Asia-Pacific: Bosch Secrity Systems B.V. P.O. Box JB Eindhoven, The Netherlands Phone: emea.secritysystems@bosch.com emea.boschsecrity.com Bosch Sicherheitssysteme GmbH Robert-Bosch-Ring Grasbrnn Germany Bosch Secrity Systems, Inc. 130 Perinton Parkway Fairport, New York, 14450, USA Phone: Fax: onlinehelp@s.bosch.com Robert Bosch (SEA) Pte Ltd, Secrity Systems 11 Bishan Street 21 Singapore Phone: Fax: apr.secritysystems@bosch.com Bosch Secrity Systems 2016 Data sbject to change withot notice en, V19, 09. Ag 2016