800 TO 9000 LUMEN 8 LED RETRO-FIT HYPERBOLIC / PARABOLIC / WALLWASH LRT8 SERIES

Transcription

1 ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT One fixture converts nearly any manufacturers incandescent, CFL or H.I.D. fixtures with a rough-in inner diameter of -/ to -/ diameter to high efficiency LED All installation can be performed from below the ceiling with out removing existing fixture Energy savings up to -% vs. CFL and HID Superior-quality white LED light output using Chip on Board technology No harmful ultraviolet or infrared wavelengths No lead or mercury PRODUCT SPECIFICATIONS Enabled with Atrius : These products are enabled with Atrius, making them part of the Atrius Sensory Network and ready to deliver valuable data and connectivity to the Atrius Platform. For more information concerning Atrius solutions, please refer to OPTICS Hyperbolic: Unique hyperbolic shape optimized for small, directional LED source, maximizes fixture efficiency while creating the Silent Ceiling appearance by reducing lamp image and aperture brightness Geometry of hyperbolic curve provides unique aperture appearance and smoother light distribution Parabolic/Lens: Computer-optimized parabolic reflector with frosted convexed lens regressed into cone provides uniform distribution with no striations Wall Wash: Available in Hyperbolic and Parabolic. Both providing uniform distributions with no striations Baffle: White or black painted deep multi-groove aluminum baffle insert with integral white painted flange and frosted convexed glass lens ELECTRICAL LED Light Engine: Compact light source delivers uniform illumination without pixilation, enabling excellent beam control SDCM (K within SDCM), & CRI Replaceable light engine with push in wire connections mounts directly to heat sink and is easily replaceable Passive Cooling: Aluminum heat sink integrated directly with housing provides superior thermal management to ensure the long life of LED LED Driver: Power factor >. Easily replaceable from above or below the ceiling Dimming: Dimmable via -V protocol standard Optional drivers available for use with Lutron EcoSystem, -wire dimmers DMXR, or DALI For a list of compatible dimmers, see LED-DIM. Life: Rated for, hours at % lumen maintenance Available with optional Lumen Depreciation Indicator (LDI) J..G ENABLED WITH TO LUMEN LED RETRO-FIT HYPERBOLIC / PARABOLIC / WALLWASH LRT SERIES Project: Notes: Type Cat. No. Operation Temperature: - C to C Emergency Battery Pack (Optional) output: Provides a minimum of (BR), or (HBR) lumens for a minimum duration of minutes BRTC option is CEC Title compliant Warranty: years when used in accordance with manufacturing guidelines. Specifications subject to change without notice. A+ Capable options indicated by this color background ORDERING INFORMATION ROUGH-IN Complete Catalog # Example Includes (Rough-In, option, reflector, accessory) Ordering Example: LRT LM K MVOLT G CRI ZT LDI HW CS PF Series Lumen Package Color Temperature Voltage Generation CRI Driver Rough-In Options LRT L-Series Retrofit Downlight LM LM LM LM LM LM LM LM LM LM LM LM LM LM LM LM LM LM K K K K K K K K K K Volt Volt Volt MVOLT Multi-Volt (-) G Gen CRI + CRI CRI + CRI CRI + CRI DALI DALI Control Dimming DMXR DMX/RDM Driver EDAB, eldoled SOLOdrive DALI. Logarithmic dimming to <% EDXB,, eldoled POWERdrive DMX/RDM w/ Phoenix Connectors. Logarithmic dimming to <% EZ, eldoled -V ECOdrive. Linear dimming to % min. EZ, eldoled -V ECOdrive. Linear dimming to % min. EZB, eldoled -V SOLOdrive. Logarithmic dimming to <% FD, Forward or Reverse Phase Dimming Driver FDL,, Forward Phase Dimming Lutron Driver PD, Lutron Ecosystem Dimming Driver -V Dimming ZT F, CP LDI BR, BRTC, HBR, NL, NLER, INC AEBN Fuse and Fuse Holder Chicago Plenum Lumen Depreciation Indicator Emergency Battery Pack w/remote Test Switch Emergency Battery Pack w/ Remote Test Switch, CEC Title Compliant High Lumen Emergency Battery Pack w/remote Test Switch nlight Dimming Pack Controls nlight dimming pack controls. nler controls fixtures on emergency circuit Medium base socket adapter for quick retro-fit of incandescent fixtures Atrius enabled, Bluetooth beacons, network and in fixture power supply REFLECTOR To order reflector separately, use LRT prefix before reflector option values. Ex: LRT HW CS PF See notes on page. Trim Style Finish Trim Options BAF HM HN HW HWS Baffle Hyperbolic Medium Hyperbolic Narrow Hyperbolic Wide Hyperbolic Single Wall Wash P WC WD WS Parabolic Corner Wall Wash Double Wall Wash Single Wall Wash BL CD CS CSS WH Black (Baffle only) Clear Diffuse Clear Specular Clear Semi-Specular White PF WET White Flange Wet Location S. Wolf Road Des Plaines, IL Phone () - Fax () - Visit us at Printed in U.S.A. Acuity Brands Lighting, Inc. Rev.// of

2 Ordering Notes Only,, and lumen fixtures are MVOLT. K & K only. Not available with V. Not compatible with LDI. Not available for lumens and up. Not available for and lumens and up. V only. Not available for lumens and up. Specify voltage. BR, BRTC, HBR, EDXB, NL, NLER not compatible with CP. Only compatible with EZ, EZ & EZB (nps EZ) drivers and LM-LM ZT (npp D) drivers. Only available with BL or WH trim finish. Not compatible with WET. CRI not compatible with K for - lumens. Not required when specifying WH finish. Not compatible with NL between and lumens. Not compatible with BR, BRTC, HBR, or LDI. See AEBN notes in following table for compatibility with other options. J..G AEBN Notes Only compatible with ZT, EZ, EZB, EZ drivers. CP, BR, BRTC, HBR, NL, NLER not compatible with AEBN. Recommended ceiling height of and under; not intended for use on ceilings greater than. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Acuity Brands Lighting is under license. PRODUCT SPECIFICATIONS (cont.) MECHANICAL Retro-fit Housing: Housing installs from below ceiling Secured in place by three () tension clips Tension clips accommodate ceilings from / to -/ thick Integral heat sink conducts heat away from LED light engine Driver is accessible from below the ceiling and can be upgraded to accommodate future technology improvements. Atrius Enabled TRIMS: PASSIVE COOLING DIMENSIONS: - PASSIVE COOLING DIMENSIONS: - HYPERBOLIC Optional Medium Base socket adapter for quick retro-fit of incandescent fixtures (see INC option) To Existing Junction Box " Dia. " PASSIVE COOLING DIMENSIONS: - Optional Medium Base socket adapter for quick retro-fit of incandescent fixtures (see INC option) To Existing Junction Box PARABOLIC -/" " (NL, NLER, DMXR) -/" (V) HYPERBOLIC WALLWASH -/" -/" -/" (V) -/" -/" (NL, NLER, DMXR) " Dia. -/" Dia. PARABOLIC WALLWASH APERTURE: " Dia. CEILING CUTOUT: -/" Dia. OVERLAP: -/" Dia. ENERGY STAR certified PRODUCT# EDAB, EDXB, PD and FDL options are not ENERGY STAR certified. Indicated lumen packages are not ENERGY STAR certified with -DMXR or -DALI options when used with volts. FIXTURE CONFIGURATIONS = ENERGY STAR MVOLT V/V Lumen Package: WW =,,, LRT (WW)LM (XX)K MVOLT G (YY)CRI (ZZ) (CC) CCT: XX =,,,, Voltage: MVOLT (V-V) CRI: YY =,, Trim Type: ZZ = HN, HM, HW, P Trim Color/Finish: CC = CS, CSS, CD V/V Lumen Package: WW =,,,,,,,,,,,,,, LRT (WW)LM (XX)K (V) G (YY)CRI (ZZ) (CC) CCT: XX =,,,, Voltage: V =, CRI: YY =,, Trim Type: ZZ = HN, HM, HW, P Trim Color/Finish: CC = CS, CSS, CD LABELS AND LISTINGS UL & cul listed for damp locations UL spacing requirement for lumen and above: minimum of between fixture centers, overhead clearance, from fixture center to side wall RoHS compliant EMI complies with FCC, Part, Class A ENERGY STAR certified, see table for designated products I.B.E.W. Union made ARRA Compliant S. Wolf Road Des Plaines, IL Phone () - Fax () - Visit us at Printed in U.S.A. Acuity Brands Lighting, Inc. Rev.// of

3 J..G ENGINEERING DATA: Volt available, consult factory VOLTAGE LIGHT ENGINE LUMENS CCT K/K/K/K/K INPUT CURRENT INPUT WATTAGE INPUT FREQUENCY /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz THD% POWER FACTOR VOLTAGE LIGHT ENGINE LUMENS CCT K/K/K/K/K INPUT CURRENT INPUT WATTAGE INPUT FREQUENCY /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz /Hz THD% POWER FACTOR HYPERBOLIC DELIVERED LUMENS/LUMENS PER WATT (K CRI) K K K K K K K K K TRIM/FINISH LPW LPW LPW LPW LPW LPW LPW LPW LPW LRT HN CS LRT HN CSS LRT HN CD LRT HM CS LRT HM CSS LRT HM CD LRT HW CS LRT HW CSS LRT HW CD K K K K K K K K K TRIM/FINISH LPW LPW LPW LPW LPW LPW LPW LPW LPW LRT HN CS LRT HN CSS LRT HN CD LRT HM CS LRT HM CSS LRT HM CD LRT HW CS LRT HW CSS LRT HW CD PARABOLIC DELIVERED LUMENS/LUMENS PER WATT (K CRI) K K K K K K K K K TRIM/FINISH LPW LPW LPW LPW LPW LPW LPW LPW LPW LRT P CS LRT P CSS LRT P CD K K K K K K K K K TRIM/FINISH LPW LPW LPW LPW LPW LPW LPW LPW LPW LRT P CS LRT P CSS LRT P CD BEAM SPREAD TRIM LUMEN LUMEN LUMEN LRT HN CS LRT HN CSS LRT HN CD LRT HM CS LRT HM CSS LRT HM CD LRT HW CS LRT HW CSS LRT HW CD - LUMEN - LUMEN LRT P CS LRT P CSS LRT P CD LRT BAF BL CCT MULTIPLIERS CCT LM-LM LM-LM LM-LM K... K... K K... K... CRI MULTIPLIERS CRI LM-LM LM-LM LM-LM CRI CRI... CRI... S. Wolf Road Des Plaines, IL Phone () - Fax () - Visit us at Printed in U.S.A. Acuity Brands Lighting, Inc. Rev.// of

4 J..G PHOTOMETRICS Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at Above Floor for a Single Luminaire LRT LM K + LRT HN CS, K LEDs, input watts:., delivered lumens:., LM/W =., Spacing Criteria:., test no. PR, tested in accordance to IESNA LM-. Zone % *. pf % pc % % % pw % % % % % % % % %..... % beam -. % beam LRT LM K + LRT HM CS, K LEDs, input watts:., delivered lumens:., LM/W =., Spacing Criteria:., test no. PR, tested in accordance to IESNA LM *. pf % pc % % % pw % % % % % % % % %..... % beam -. % beam LRT LM K + LRT HW CS, K LEDs, input watts:., delivered lumens:., LM/W =., Spacing Criteria:., test no. PR, tested in accordance to IESNA LM *. pf % pc % % % pw % % % % % % % % %..... % beam -. % beam S. Wolf Road Des Plaines, IL Phone () - Fax () - Visit us at Printed in U.S.A. Acuity Brands Lighting, Inc. Rev.// of

5 J..G PHOTOMETRICS Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at Above Floor for a Single Luminaire LRT LM K + LRT HN CS, K LEDs, input watts:., delivered lumens:., LM/W =., Spacing Criteria:., test no. PR, tested in accordance to IESNA LM *. pf % pc % % % pw % % % % % % % % %..... % beam -. % beam LRT LM K + LRT HM CS, K LEDs, input watts:., delivered lumens:., LM/W =., Spacing Criteria:., test no. PR, tested in accordance to IESNA LM *. pf % pc % % % pw % % % % % % % % %..... % beam -. % beam LRT LM K + LRT HW CS, K LEDs, input watts:., delivered lumens:., LM/W =., Spacing Criteria:., test no. PR, tested in accordance to IESNA LM *. pf % pc % % % pw % % % % % % % % %..... % beam -. % beam S. Wolf Road Des Plaines, IL Phone () - Fax () - Visit us at Printed in U.S.A. Acuity Brands Lighting, Inc. Rev.// of

6 J..G PHOTOMETRICS Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at Above Floor for a Single Luminaire LRT LM K + LRT HN CS, K LEDs, input watts:., delivered lumens:., LM/W =., Spacing Criteria:., test no. PR, tested in accordance to IESNA LM *. pf % pc % % % pw % % % % % % % % %..... % beam -. % beam LRT LM K + LRT HM CS, K LEDs, input watts:., delivered lumens:., LM/W =., Spacing Criteria:., test no. PR, tested in accordance to IESNA LM *. pf % pc % % % pw % % % % % % % % %..... % beam -. % beam LRT LM K + LRT HW CS, K LEDs, input watts:., delivered lumens:., LM/W =., Spacing Criteria:., test no. PR, tested in accordance to IESNA LM *. pf % pc % % % pw % % % % % % % % %..... % beam -. % beam S. Wolf Road Des Plaines, IL Phone () - Fax () - Visit us at Printed in U.S.A. Acuity Brands Lighting, Inc. Rev.// of

7 J..G PHOTOMETRICS Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at Above Floor for a Single Luminaire LRT LM K + LRT P CS, K LEDs, input watts:., delivered lumens:., LM/W =., Spacing Criteria:., test no. PR, tested in accordance to IESNA LM *. pf % pc % % % pw % % % % % % % % %..... % beam -. % beam LRT LM K + LRT P CS, K LEDs, input watts:., delivered lumens:., LM/W =., Spacing Criteria:., test no. PR, tested in accordance to IESNA LM *. pf % pc % % % pw % % % % % % % % %..... % beam -. % beam LRT LM K + LRT P CS, K LEDs, input watts:., delivered lumens:., LM/W =., Spacing Criteria:., test no. PR, tested in accordance to IESNA LM *. pf % pc % % % pw % % % % % % % % %..... % beam -. % beam S. Wolf Road Des Plaines, IL Phone () - Fax () - Visit us at Printed in U.S.A. Acuity Brands Lighting, Inc. Rev.// of

8 J..G PERFORMANCE DATA LUMINAIRES SPACED FROM WALL Catalog Number: LRT LM K G CRI ZT; LRT HWS CSS Spread: Single Wall Test #: PRP LUMINAIRES SPACED FROM WALL Catalog Number: LRT LM K G CRI ZT; LRT HWS CSS Spread: Single Wall Test #: PRP LUMINAIRES SPACED FROM WALL Catalog Number: LRT LM K G CRI ZT; LRT HWS CSS Spread: Single Wall Test #: PRP *Based on minimum of five luminaires. Reflectances:,,. Values are rounded to nearest whole footcandle. s* s* s* s* s* s* s* Lateral Distance From Fixture From Wall BXRC-EK-D--SE Spaced From Wall Spaced From Wall Spaced From Wall Distance From Ceiling CL CL CL CL CL CL s* Lateral Distance From Fixture From Wall BXRC-EK-D--SE Spaced From Wall Spaced From Wall Spaced From Wall Distance From Ceiling CL CL CL CL CL CL s* Lateral Distance From Fixture From Wall BXRC-EK-D--SE Spaced From Wall Spaced From Wall Spaced From Wall Distance From Ceiling CL CL CL CL CL CL Fixtures tested to IES recommended standard for solid state lighting per LM--. Photometric performance on a single unit represents a baseline of performance for the fixture. Results may vary in the field. S. Wolf Road Des Plaines, IL Phone () - Fax () - Visit us at Printed in U.S.A. Acuity Brands Lighting, Inc. Rev.// of

9 J..G PERFORMANCE DATA LUMINAIRES SPACED FROM WALL Catalog Number: LRT LM K G CRI ZT; LRT WS CSS Spread: Single Wall Test #: PR s* s* s* Lateral Distance From Fixture From Wall BXRC-EK-D--SE Spaced From Wall Spaced From Wall Spaced From Wall Distance From Ceiling CL CL CL CL CL CL LUMINAIRES SPACED FROM WALL Catalog Number: LRT LM K G CRI ZT; LRT WS CSS Spread: Single Wall Test #: PR LUMINAIRES SPACED FROM WALL Catalog Number: LRT LM K G CRI ZT; LRT WS CSS Spread: Single Wall Test #: PR *Based on minimum of five luminaires. Reflectances:,,. Values are rounded to nearest whole footcandle. s* s* s* s* s* Lateral Distance From Fixture From Wall BXRC-EK-D--SE Spaced From Wall Spaced From Wall Spaced From Wall Distance From Ceiling CL CL CL CL CL CL s* Lateral Distance From Fixture From Wall BXRC-EK-D--SE Spaced From Wall Spaced From Wall Spaced From Wall Distance From Ceiling CL CL CL CL CL CL Fixtures tested to IES recommended standard for solid state lighting per LM--. Photometric performance on a single unit represents a baseline of performance for the fixture. Results may vary in the field. S. Wolf Road Des Plaines, IL Phone () - Fax () - Visit us at Printed in U.S.A. Acuity Brands Lighting, Inc. Rev.// of

10 J..G CONTROLS EXAMPLE Group Fixture Control* *Appiication diagram applies for fixtures with eldoled drivers only. nps EZ Dimming/Control Pack (qty: required) npodm P DX Dual On/Off/Dim Push-Button WallPod ncm ADCX Daylight Sensor with Automatic Dimming Control ncm PDT Dual Technology Occupancy Sensor ncm PDT npodm P DX Description: This design provides a dual on/off/dim wall station that enables manual control of the fixtures in Row A and Row B separately. Additionally, a daylight harvesting sensor is provided so the lights in Row B can be configured to dim automatically when daylight is available. An occupancy sensor turns off all lights when the space is vacant. A A B C A nps EZ B B C WIRING KEY nps EZ A B C CAT-e Cable Line Power Low Voltage Dimming Wires ncm ADCX A OPTIONAL Choose Wall Controls nlight offers multiple styles of wall controls - each with varying features and user experience. nlight Controls Accessories: Order as separate catalog number. Visit for complete listing of nlight controls. WallPod Stations Model number Occupancy sensors Model Number Push-Button Wallpod Traditional tactile buttons and LED user feedback Graphic Wallpod Full color touch screen provides a sophisticated look and feel On/Off npodm (Color) Small motion º, ceiling (PIR/dual Tech) ncm / ncm PDT On/Off & Raise/Lower npod DX (Color) Large motion º, ceiling (PIR/dual tech) ncm / ncm PDT Graphic Touchscreen npod GFX (Color) Wide View (PIR/dual tech) nwv / nwv PDT Photocell controls Model Number Wall Switch w/ Raise/Lower (PIR/dual tech) nwsx LV DX / nwsx PDT LV DX Dimming ncm ADCX Cat- cables (plenum rated) Model Number ', CAT FT CAT FT J, CAT FT CAT FT J Capable Luminaire This item is an A+ capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning. All configurations of this luminaire meet the Acuity Brand's specification for chromatic consistency. This luminaire is part of an A+ Certified solution for nlight control networks when ordered with drivers marked by a Shaded background* This Luminaire is part of an A+ Certified solution for nlight control networks, providing advanced control functionality at the luminaire level, when selection includes driver and control options marked by a shaded background* To learn more about A+, visit *See ordering tree for details S. Wolf Road Des Plaines, IL Phone () - Fax () - Visit us at Printed in U.S.A. Acuity Brands Lighting, Inc. Rev.// of