Doc. Number: N Report of CEN/TC 267 Secretariat "Industrial piping and pipelines" for the 30 th Plenary Meeting 27 October 2016 (Paris)
|
|
- Ella Manning
- 6 years ago
- Views:
Transcription
1 «Industrial piping and pipelines» CEN/TC 67 Date: Assistant: Patricia DUFOUR Direct line: + (0) p.dufour@unm.fr Doc. Number: N 1069 Your contact: Patrick AMESLON Direct line: + (0) p.ameslon@unm.fr Report of CEN/TC 67 Secretariat "Industrial piping and pipelines" for the 0 th Plenary Meeting 7 October 016 (Paris) COMMENTS/ DECISIONS The report of the secretariat was prepared for the 0 th plenary Meeting of CEN/TC 67 to be held on 7 October 016 (Paris). FOLLOW UP To be presented during CEN/TC 67 Plenary Meeting (Paris) Items 6.1 to 6. of the Draft Agenda CEN/TC 67 N 1060 SOURCE Patrick AMESLON, UNM on behalf of AFNOR, CEN/TC 67 Secretariat Bureau de Normalisation par délégation d AFNOR F-908 Paris La Défense cedex /, rue Louis Blanc Courbevoie France - Tél: Fax :
2 1 SCOPE Standardization of rules constituting a design and manufacturing code comprising the choice of materials, design, fabrication, installation, inspection and testing of industrial piping and pipeline, including the choice of safety systems. The meaning of "industrial piping" is the following: Pipes or pipe networks located on the premises of an industrial site. The meaning of "pipelines" is the following: Pipes or pipe networks located outside premises of an industrial site. The following are excluded from the scope of CEN/TC 67: Pipelines for waste water, and piping for waste water, the latter being directly evacuated via the sewer system outside of industrial premises and/or in the environment (dealt within CEN/TC 16); Pipelines for gaseous fuels (that is to say any fuel that is in gaseous state at a temperature of 1 C and at a pressure of 1 bar (dealt with in CEN/TC ); Piping and pipelines for water for human consumption (dealt with in CEN/TC 16); Pipelines for petroleum and natural gas industries (dealt with in CEN/TC 1). The limits between piping and pipelines are defined by CEN/TC 67/WG 1. STRUCTURE TC Title Chairman Secretary 67 Industrial piping and pipelines Mr. Verrier (France) Mr. Ameslon (UNM - France) WG Title Convenor Secretary 1 General Mr. Di Rienzo(France) Mr. Ameslon (UNM - France) Metallic materials (joint with CEN/TC ) Mr. Langenberg (Germany) Mr. Hanschke (DIN - Germany) Design and calculation Mr. Forterre (France) Mr. Ameslon (UNM - France) Manufacturing and installation Mr. Mussmann (Germany) Mr. Perez Kaiser (DIN - Germany) Inspection and testing Mr. Kittel (Germany) Mr. Perez Kaiser (DIN - Germany) 9 Aluminium and aluminium alloy piping (joint with CEN/TC ) Mr. Kittel (Germany) Mr. Perez Kaiser (DIN - Germany) 8/MHD Maintenance of EN 180 series Mr. Di Rienzo (France) Mr. Ameslon (UNM - France) LIAISONS OF CEN/TC 67 CEN/TC 67 has a liaison with the following committees: - CEN/TC 1 "Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries" - CEN/TC "Unfired pressure vessels" - CEN/TC 7 "Flanges and their joints"
3 - CEN/TC 11 "Welding" - CEN/TC 1 Aluminium and aluminium alloys - CEN/TC 68 "Cryogenic vessels and specific hydrogen technologies applications" - CEN/TC 69 "Shell and water-tube boilers" - ECISS/TC 110 "Steel tubes, and iron and steel fittings" - CEN/TC 0/SC 1 Eurocode 1: Actions on structure - CEN/TC 0/SC Eurocode : Design of steel structures - CEN/TC 0/SC 8 Eurocode 8: Earthquake resistance design of structures WORK PROGRAMME CURRENT STATUS OF WORK ITEMS / Draft project Current status WG EN 180-1:01/prA1 Resolution CEN/TC 67 N6/010 (document CEN/TC 67 N 71) Extend the scope of to low temperatures (cryogenic applications) 1 Decision CEN/TC 67 N18/01 (document CEN/TC 67 N 1016) EN 180-6:01/prA Revision of A.. «Global stability of a buried piping system» following the MHD question Remarks from Mr. TEASDALE (PED CEN Consultant) on EN 180-6:01/prA EN 180-:01/prA Decision CEN/TC 67 N/01 (document CEN/TC 67 N 90) Revision of B.-1 Reference thickness eb (reference thickness for pressure equipment accessories) EN 180-:01/prA Decision CEN/TC 67 N6/01 (document CEN/TC 67 N 90) Revision for adding material selection criteria for pipe supports EN 180-:01/prA Decision CEN/TC 67 N9/01 (document CEN/TC 67 N 98) Alignment of Nomograms in EN 1 and EN 180 considering the latest changes incorporated in 01 (new model and extension to t = 00 mm) EN 180-:01/prA6 Decision CEN/TC 67 N10/01 (document CEN/TC 67 N 98) Extension of the application of method to steel groups,, and 6 according to CEN ISO/TR EN 180-:01/prA7 Decision CEN/TC 67 N11/01 (document CEN/TC 67 N 98) Revision of Clause B. with respect to more practical use especially concerning Clause B..
4 / Draft project Current status WG Activation of the Preliminary Work Dispatch of Enquiry Draft to CCMC by EN 180-:01/prA8 Decision CEN/TC 67 N19/01 (document CEN/TC 67 N 1016) Revision of Table B.-9 (bolts and nuts) with respect to changes made in latest version of EN 1069:01 Adoption of a New Work Item Dispatch of Enquiry Draft to CCMC by EN 180-:01/prA9 Decision CEN/TC 67 N0/01 (document CEN/TC 67 N 1016) Amending Table A.1 "Grouping system for steels" considering CEN ISO/TR 1608: EN 180-:01/prA10 Submitted to CEN Enquiry to (document CEN/TC 67 N 1061) Revision of the scope EN 180-:01/prA1 Submitted to CEN Enquiry to (document CEN/TC 67 N 108) Various items: mitre bends, expansion joints, supports and flanges) EN 180-:01/prA Decision CEN/TC 67 N1/01 (document CEN/TC 67 N 98) Revision of Clause 1 and Annex H related to Stress Intensification Factors SIF EN 180-:01/prA Resolution CEN/TC 67 N/01 (document CEN/TC 67 N 1016) Various items: vibration, creep, materials, steel castings and bolts for stainless steel/creep range EN 180-:01/FprA To be submitted to Formal Vote to (documents CEN/TC 67 N 10 N 101) Revision of clauses 9.1 "Post-weld heat treatment" and 1. " Connections for static electricity" EN 180-:01/prA To be submitted to CEN Enquiry to (documents CEN/TC 67 N 107 N 10) Modification of clause "Welding personnel
5 / Draft project Current status WG To be submitted to Formal Vote to EN 180-:01/FprA (documents CEN/TC 67 N 100 N 10) Inclusion of additional new NDT techniques and the revision of sub-clauses on NDT and destructive testing for formed parts To be submitted to Formal Vote to EN 180-:01/FprA (documents CEN/TC 67 N 106 N 10) Revision of clauses 8.1. "Imperfections revealed by sample inspection " and 9.. " Pneumatic pressure test " Submitted to the adoption of a Preliminary Work Item to EN 180-:01/prA Decision CEN/TC 67 C7/016 (documents CEN/TC 67 N 108 N 107) Introduction of a new informative Annex B "Initial service leak test" Submitted to the activation of the Preliminary Work Item to : Decision CEN/TC 67 C/ prcen/tr Decision to launch the TCA: Decision CEN/TC 67 C6/016 not adopted (document CEN/TC 67 N 107) Revision of CEN/TR 180-7:00 related to "Guidance on the use of conformity assessment procedures" PUBLICATIONS of AMENDMENTS since the 01 Edition of EN 180 series EN 180-:01/A1:01 Publication EN 180-:01/A1:01 Publication EN 180-:01/A1:01 Publication EN 180-8:01/A1:01 Publication EN 180-:01/A:01 Publication EN 180-8:01/A:01 Publication EN 180-6:01/A1:016 Publication Revision of clauses A...6. "Stress in the effective length of the pipe" and A...7 "Unrestrained pipe" 1
6 EN 180-:01/A: EN 180-:01/A:016 Publication Revision of Table B.-11 Austenitic stainless steels and their lowest minimum metal temperature TM Foreseen Publication Revision of clauses 9.1 "Welding personnel" and "Local heat treatment" 6 SITUATION REGARDING THE DECISIONS ADOPTED BEFORE AND AFTER THE 9 th PLENARY MEETING Decisions DECISION C 01/01 by correspondence (document N 97) Subject: Decision on EN 180-:01/prA after CEN Enquiry ( ) to Formal Vote DECISION C 0/01 by correspondence (document N 976) Subject: Decision on EN 180-:01/prA after CEN Enquiry ( ) - to nd CEN Enquiry DECISION C 0/01 by correspondence (document N 98) Subject: Adoption of a New Work Item - EN 180-:01/FprA DECISION C 0/01 by correspondence (document N 98) Subject: Adoption of a New Work Item - EN 180-:01/prA DECISION C 0/01 by correspondence (document N 98) Subject: Adoption of a New Work Item - EN 180-:01/prA DECISION C 06/01 by correspondence (document N 98) Subject: Decision on EN 180-8:01/prA after CEN Enquiry ( ) to skip the Formal Vote and go to publication DECISION C 07/01 by correspondence (document N 986) Subject: Activation of Preliminary Work Item EN 180-6:01/prA1 DECISION C 08/01 by correspondence (document N 988) Subject: Launching of UAP on Work Item EN 180-:01/FprA DECISION N 009/01 (document N 1016) Subject: Appointment of CEN/TC 67/WG 1 Convenor DECISION N 010/01 (document N 1016) Subject: Appointment of CEN/TC 67/WG Convenor DECISION N 011/01 (document N 1016) Subject: Change of track for EN 180-:01/prA1 ( 00670) Follow-up 6
7 Decisions DECISION N 01/01 (document N 1016) Subject: Annex ZA for European Directive 01/68/UE Pressure Equipment DECISION N 01/01 (document N 1016) Subject: Joint working group of experts with CEN/TC on nonharmonized materials DECISION N 01/01 (document N 1016) Subject: Maintenance Help Desk EN 180/MHD DECISION N 01/01 (document N 1016) Subject: Proposal of a liaison with CEN/TC 0 Follow-up CEN/TC contacted on Action under progress in CEN/TC DECISION N 016/01 (document N 1016) Subject: Continuation of the liaison with CEN/TC 1, CEN/TC, CEN/TC 7, CEN/TC 11, CEN/TC 1, CEN/TC 68, CEN/TC 69 and ECISS/TC 110 DECISION N 017/01 (document N 1016) Subject: Approval of the revised Business Plan DECISION N 018/01 (document N 1016) Subject: Adoption of a Preliminary Work Item - EN 180-6:01/prA DECISION N 019/01 (document N 1016) Subject: Activation of preliminary Work Item EN 180-:01/prA8 DECISION N 00/01 (document N 1016) Subject: Adoption of a New Work Item - EN 180-:01/prA9 DECISION N 01/01 (document N 1016) Subject: Adoption of a New Work Item - EN 180-:01/prA10 DECISION N 0/01 (document N 1016) Subject: Activation of preliminary Work Item EN 180-:01/prA1 DECISION N 0/01 (document N 1016) Subject: Adoption of a Preliminary Work Item - EN 180-:01/prA DECISION N 0/01 (document N 1016) Subject: Adoption of a Preliminary Work Item - EN 180-:01/prA 7
8 Decisions DECISION C 01/016 by correspondence (document N 100) Subject: Decision on EN 180-:01/prA after nd CEN Enquiry ( ) to Formal Vote DECISION C 0/016 by correspondence (document N 10) Subject: Decision on EN 180-6:01/prA1 after CEN Enquiry ( ) Skip Formal Vote and go to Publication DECISION C 0/016 by correspondence (document N 10) Subject: Decision on EN 180-:01/prA after CEN Enquiry ( ) to Formal Vote DECISION C 0/016 by correspondence (document N 106) Subject: Decision on EN 180-:01/prA after CEN Enquiry ( ) to Formal Vote DECISION C 0/016 by correspondence (document N 107) Subject: Activation of preliminary Work Item prcen/tr DECISION C 06/016 by correspondence (document N 107) Subject: Decision to launch the TCA for FprCEN/TR 180-7:016 DECISION C 07/016 by correspondence (document N 108) Subject: Adoption of a Preliminary Work Item - EN 180-:01/prA DECISION C 08/016 by correspondence (document N 109) Subject: Decision on EN 180-:01/prA after CEN Enquiry ( ) Skip Formal Vote and go to Publication DECISION C 09/016 by correspondence (document N 107) Subject: Activation of preliminary Work Item EN 180-:01/prA Follow-up Not accepted Swedish comments to study Action under progress in CEN/TC 67/WG 8
CEN/TC 442 Decisions taken /16
CEN/TC 442 Building Information Modelling (BIM) CEN/TC 442 Decisions taken 2016-02-15/16 Date: 2016-02-16 Secretariat Reference: CEN/TC 442 N065 SN (Norway) Lisbet Landfald e-mail: lla@standard.no Direct
More informationContents. EN :2012 (E) Issue 5 ( ) Page
Contents Page Foreword... 4 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 7 4 Symbols and abbreviations... 7 5 Determination of inspection and testing requirements... 8 5.1 General...
More informationCEN/TC 229 "Precast concrete products CEN/TC 229 N nd meeting of CEN/TC (Oslo) Draft agenda Revision 1
AFNOR-NORMALISATION Unit Construction and Water Cycle Department CEN/TC 229 Secretariat Your correspondent : Jean-Claude HESLING direct line : +33 (0)1 41 62 83 93 jeanclaude.hesling@afnor.org Secretary
More informationCEN/TC 207 N N Work programme May Document type: Other committee document. Date of document:
CEN/TC 207 N 1646 CEN/TC 207 Furniture Email of secretary: fabrizio.tacca@uni.com Secretariat: UNI (Italy) N 1646 - Work programme May 2016 Document type: Other committee document Date of document: 2016-05-05
More informationBUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS
Page:1 BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal,
More informationEU Best practice of Technical Committees and benefits that could be achieved
EU Best practice of Technical Committees and benefits that could be achieved Ian Greensmith Senior Standards Expert Brussels, 29 th of January 2013 www.inogate.org What is a standard? Standard: document,
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 13445-102 May 2015 ICS 23.020.30 English Version Unfired pressure vessels - Part 102: Example of application of vertical vessel with bracket
More informationBUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY Standards to be delivered by this TC cover pipe products for the construction of public, industrial or private
More informationContact: Title: Resolutions of ISO/TC th plenary meeting held on in Tokyo (Japan) Source: TC secretariat. Project(s): Status:
Date 2007-11-26 Supersedes document Reference number ISO/TC 224 N 360 This document is still under study and subject to change. It should not be used for reference purposes. ISO/TC 224 Title: Service activities
More informationCEN/TC 151 N 800. N 800 CEN TC 396 Activity report. Date of document Expected action
CEN/TC 151 N 800 CEN/TC 151 Construction equipment and building material machines - Safety E-mail of Secretary: rene.kampmeier_vdma.org@livelink.din.de Secretariat: DIN N 800 CEN TC 396 Activity report
More informationBUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS Scope EXECUTIVE SUMMARY Safety and control devices for equipment burning gaseous or
More informationISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements
INTERNATIONAL STANDARD ISO 14847 First edition 1999-04-01 Rotary positive displacement pumps Technical requirements Pompes volumétriques à mouvement rotatif Prescriptions techniques A Reference number
More informationCEN System Delegated Decisions Dispatch 33:2016
2016-08-16 Page 1 CEN System Delegated Decisions Dispatch 33:2016 1 CEN/TC 127 Correspondence... 1 2 CEN/TC 147 Correspondence... 9 3 CEN/TC 160 Correspondence... 10 4 CEN/TC 182 Correspondence... 12 5
More informationOn , CCMC received a proposal from DIN for the creation of a new Technical Committee in the area of Food Authenticity (see Annex 1).
BT N 11281 Draft BT C143/2018 TECHNICAL BOARD CEN/BT by correspondence For vote Issue date: 2018-08-22 According to IR2 Clause 6.1.4 Deadline: 2018-11-20 SUBJECT Establishment of a new TC on Food authenticity
More informationBUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY Business Environment Europe represents approximately 28,6 % of the world market. The parties involved are: - manufacturers of industrial
More informationISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials
INTERNATIONAL STANDARD ISO 3452-2 First edition 2000-04-01 Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials Essais non destructifs Examen par ressuage Partie 2: Essais des
More informationNew CEN Enquiry procedure - 3 Month enquiry with weighted vote and optional formal vote for CEN home-grown projects
Economic Commission for Europe Inland Transport Committee Working Party on the Transport of Dangerous Goods Joint Meeting of the RID Committee of Experts and the Working Party on the Transport of Dangerous
More informationThe term of the incumbent chairperson of ISO/TC 135/SC 3, Mr. Udo Schlengermann expires at the end of year 2013.
ISO/TC 135 N 476 Non-destructive testing Our Date: 2013-10-15 Number of Pages:9 (Incl. this page.) To: Cc : ISO Central Secretariat P-members and O-members of ISO/TC 135 Chairmen and Secretaries of ISO/TC
More informationBUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY Scope CEN/TC 250 covers the standardization of structural and geotechnical design rules for building and civil engineering works
More informationCEN/TC 12. and ISO TC67 SC4 Plenary meeting in PAU (2004)
ISO/TC 67/SC 4 N 282 CEN/TC 12 and ISO TC67 SC4 Plenary meeting in PAU (2004) 12/13 May 2004 1 1 CEN TC12 AND ISO TC67 CEN TC12 is acting according to the goal of the Industry: GLOBAL STANDARDS USED LOCALLY
More informationCEN System - Delegated Decisions Dispatch 14:2017
2017-04-03 Page 1 CEN System - Delegated Decisions Dispatch 14:2017 1 CEN/TC 33... 1 2 CEN/TC 52... 4 3 CEN/TC 53... 5 4 CEN/TC 72... 6 5 CEN/TC 123... 7 6 CEN/TC 129... 8 7 CEN/TC 155... 11 8 CEN/TC 161...
More informationBUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY
Page: 1 Business environment BUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY The 5 standards published by CEN/TC 208 since 1996 are used throughout the
More informationBUSINESS PLAN. CEN/TC 444 Test methods for environmental characterization of solid matrices
Page: 1 BUSINESS PLAN CEN/TC 444 Test methods for environmental characterization of solid matrices EXECUTIVE SUMMARY Scope Standardization of test methods for the environmental characterization of soil,
More informationIrish Standard I.S. EN :2011
Irish Standard Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified) NSAI 2011 No copying
More informationCEN System - Delegated Decisions Dispatch 22:2017
2017-05-29 Page 1 CEN System - Delegated Decisions Dispatch 22:2017 1 CEN/TC 19... 1 2 CEN/TC 33... 4 3 CEN/TC 128... 6 4 CEN/TC 155... 8 5 CEN/TC 169... 12 6 CEN/TC 183... 13 7 CEN/TC 250... 20 8 CEN/TC
More informationBUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY Business Environment Standardization of welding by all processes, as well as allied processes; these standards include terminology,
More informationBUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY Business Environment Nearly almost 100% of the 450 M European people are supplied with drinking water (DW) Europe represents approximately
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14163:2002 Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines Petroleum and natural gas industries - Pipeline transportation systems - Welding
More informationISO INTERNATIONAL STANDARD. Liquid hydrogen Land vehicle fuel tanks. Hydrogène liquide Réservoirs de carburant pour véhicules terrestres
INTERNATIONAL STANDARD ISO 13985 First edition 2006-11-01 Liquid hydrogen Land vehicle fuel tanks Hydrogène liquide Réservoirs de carburant pour véhicules terrestres Reference number ISO 13985:2006(E)
More informationPOLICY GUIDELINES AND PROCEDURES FOR CEN/TC 250 STRUCTURAL EUROCODES
Document: CEN/TC 250 N 250 F Ref: 7232: CEN/TC 250 To the Members of CEN/TC 250 Structural Eurocodes Date: 28 December 2003 POLICY GUIDELINES AND PROCEDURES FOR CEN/TC 250 STRUCTURAL EUROCODES NOTE 1 This
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15609-5 First edition 2004-08-01 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding Descriptif
More informationISO INTERNATIONAL STANDARD. Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed
INTERNATIONAL STANDARD ISO 14744-4 First edition 2000-04-15 Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed Soudage Essais de réception des machines
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12953-4:2002 Trummelkatlad. Osa 4: Katla survedetailide väljatöötamisviis ja valmistamine Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler EESTI
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60730-2-13 Edition 3.0 2017-10 Automatic electrical controls INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 97.120 ISBN 978-2-8322-4900-0 Warning! Make sure that you obtained
More informationISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements
INTERNATIONAL STANDARD ISO 14847 First edition 1999-04-01 Rotary positive displacement pumps Technical requirements Pompes volumétriques à mouvement rotatif Prescriptions techniques A Reference number
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1555-7 April 2003 ICS 23.040.01; 91.140.40 English version Plastics piping systems for the supply of gaseous fuels - Polyethylene
More informationCEN System - Delegated Decisions Dispatch 34:2017
2017-08-21 Page 1 CEN System - Delegated Decisions Dispatch 34:2017 1 CEN/TC 19... 1 2 CEN/TC 54... 3 3 CEN/TC 88... 4 4 CEN/TC 112... 5 5 CEN/TC 147... 6 6 CEN/TC 169... 8 7 CEN/TC 191... 9 8 CEN/TC 193...
More informationHexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
Irish Standard I.S. EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13938-1 First edition 1999-08-01 Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension Textiles Propriétés
More informationPETROLEUM AND NATURAL GAS
IRISH STANDARD I.S. EN ISO 10432:2005 ICS 75.180.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - Tel: +353 1 807 3800
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61511-2 First edition 2003-07 Functional safety Safety instrumented systems for the process industry sector Part 2: Guidelines for the application of IEC 61511-1 Reference number
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 40-5:2002 Tänavavalgustuspostid. Osa 5: Nõuded terasest tänavavalgustuspostidele Lighting columns - Part 5: Requirements for steel lighting columns EESTI STANDARDIKESKUS EESTI STANDARDI
More informationCEN/TC 442. Building Information Modelling REPORT TO ACE BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442
CEN/TC 442 Building Information Modelling REPORT TO ACE BRUSSELS 2017-11-01 ØIVIND ROOTH, CHAIR CEN/TC442 Norwegian leadership in CEN and ISO 2 2 New structure decided in CEN/TC442 plenary meeting in Dublin
More informationREFRIGERATING SYSTEMS AND HEAT
IRISH STANDARD I.S. EN 12693:2008 ICS 23.140 27.080 National Standards Authority of Ireland Northwood, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie REFRIGERATING SYSTEMS
More informationNF EN V2/AC2 DÉCEMBRE Normes en ligne. Pour : CERN. Client : Commande : N T. le : 10/04/2018 à 17:39
NF EN 13445-5 V2/AC2 DÉCEMBRE 2016 Ce document est à usage exclusif et non collectif des clients Normes en ligne. Toute mise en réseau, reproduction et rediffusion, sous quelque forme que ce soit, même
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14141:2004 Valves for natural gas transportation in pipelines - Performance requirements and tests Valves for natural gas transportation in pipelines - Performance requirements and
More informationTo the Members of CEN/TC 250 Structural Eurocodes
Document: CEN/TC 250 N 1250 Date: 31 August 2018 To the Members of CEN/TC 250 Structural Eurocodes N 1250 POLICY GUIDELINES AND PROCEDURES (Version 7a) Note 1 This document provides the policy guidelines
More informationImplementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -
TF N 687rev1 2015-06-02 CONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA - 1 I - Drafting
More informationEur Ing Keith J Hawken Technical and Standards Director ISO/TC 23/SC 7 Chairman
Eur Ing Keith J Hawken Technical and Standards Director ISO/TC 23/SC 7 Chairman AEA (Agricultural Engineers Association) (Established 1875) Trade Association (member companies) Economic, Export, Legal,
More informationRevision process of EN 45545
Second International Conference MODERN TRENDS OF FIRE PROTECTION IN ROLLING STOCK 25 of June, Warsaw Revision process of EN 45545 Jolanta Maria RADZISZEWSKA-WOLIŃSKA Materials used in the presentation:
More informationEUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE
TC62/SEC1015/INF October 2009 EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE SOFTWARE AND MEDICAL DEVICES WORKING
More informationBUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY Business Environment The area of responsibility of CEN-CLC/TC 3 Quality management
More informationSTANDARDS. Heinz Jürgensen. Convenor ASERCOM Work Group Standards. Brussels,
STANDARDS Heinz Jürgensen Convenor ASERCOM Work Group Standards Brussels, -01-25 CONTENTS 1. CEN 2. ISO 3. IEC TC 113 WG 6 Status TC86 SC4 SC61C 2 EN 13215:2016 CONDENSING UNITS PERFORMANCE RATING Condensing
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61511-3 First edition 2003-03 Functional safety Safety instrumented systems for the process industry sector Part 3: Guidance for the determination of the required safety integrity
More informationConfused by standards Standards for social alarms
Confused by standards Standards for social alarms Chris Dodd Strategic Development Director Chair of the BSI Technical Committee for Social Alarms Convenor (Chair) of the CENELEC technical committee for
More informationPAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001) IRISH STANDARD I.S. EN ISO 2758:2003. Price Code
IRISH STANDARD I.S. EN ISO 2758:2003 ICS 85.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie PAPER - DETERMINATION OF
More informationISO INTERNATIONAL STANDARD. Mobile elevating work platforms Design, calculations, safety requirements and test methods
INTERNATIONAL STANDARD ISO 16368 Second edition 2010-05-15 Mobile elevating work platforms Design, calculations, safety requirements and test methods Plates-formes élévatrices mobiles de personnel Conception,
More informationSVENSK STANDARD SS-EN :2006
SVENSK STANDARD SS-EN 14870-3:2006 Fastställd 2006-02-24 Utgåva 1 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges (ISO 15590-3:2004,
More informationTC 155 TIMES. E-net doc. 2015/6392. May 2015 BRIEFING FOR BPF PIPES GROUP MEMBERS
E-net doc. 2015/6392 May 2015 TC 155 TIMES BRIEFING FOR BPF PIPES GROUP MEMBERS Harmonisation of requirements for plastic piping system awaiting response from EC. Harmonisation of requirements for drinking
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13937-3 First edition 2000-04-01 Textiles Tear properties of fabrics Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) Textiles Propriétés
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60533 Second edition 1999-11 Electrical and electronic installations in ships Electromagnetic compatibility Installations électriques et électroniques à bord des navires Compatibilité
More informationEUROCODE 5 - A HALFTIME SUMMARY OF THE REVISION PROCESS
EUROCODE 5 - A HALFTIME SUMMARY OF THE REVISION PROCESS Miriam Kleinhenz, Stefan Winter 2, Philipp Dietsch 3 ABSTRACT: This document provides an introduction to the review process of Eurocode 5, the structure
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 7005-1 Second edition 2011-07-15 Pipe flanges Part 1: Steel flanges for industrial and general service piping systems Brides de tuyauteries Partie 1: Brides en acier pour systèmes
More informationCamping tents (ISO 5912:2011)
Irish Standard I.S. EN ISO 5912:2011 Camping tents (ISO 5912:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based
More informationQAiST WP2 and 6 A status report
QAiST WP2 and 6 A status report ESTIF STD&C meeting December 2 nd 2010 Peter Kovács* and Jan Erik Nielsen *) SP Technical Research Institute of Sweden peter.kovacs@sp.se +46 706524802 Summary of presentation
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13937-2 First edition 2000-04-01 Textiles Tear properties of fabrics Part 2: Determination of tear force of trousershaped test specimens (Single tear method) Textiles Propriétés
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16411 December 2014 ICS 97.190 Supersedes CEN/TR 16411:2014 English Version Child use and care articles - 2014 compiled interpretations of
More informationMandate M/118 WASTE WATER ENGINEERING PRODUCTS
Mandate M/118 Page 1 sur 13 Mandate M/118 TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON CReatE RELATED TO THE FOLLOWING END USES 18/33 : DRAINAGE (INC. HIGHWAS)
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15027-3 Second edition 2012-11-01 Immersion suits Part 3: Test methods Combinaisons de protection thermique en cas d immersion Partie 3: Méthodes d essai Reference number ISO
More informationMedical electrical equipment
AS IEC 60601.1.12:2017 IEC 60601-1-12:2014 AS IEC 60601.1.12:2017 Medical electrical equipment Part 1.12: General requirements for basic safety and essential performance Collateral Standard: Requirements
More informationEN Electrical Equipment of non-electric appliances for household and similiar purposes Safety requirements
EN 50165 Electrical Equipment of non-electric appliances for household and similiar purposes Safety requirements J. Stenger CLC/TC61/WG3 24. April 2002 1 History Gas-Appliance Directive 96/306/EEC Annex
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10438-1 Second edition 2007-12-15 Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 1: General requirements
More informationCEN System - Delegated Decisions Dispatch 39:2016
2016-09-26 Page 1 CEN System - Delegated Decisions Dispatch 39:2016 1 CEN/TC 104... 1 2 CEN/TC 122... 3 3 CEN/TC 134... 6 4 CEN/TC 136... 7 5 CEN/TC 144... 8 6 CEN/TC 150... 8 7 CEN/TC 153... 9 8 CEN/TC
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61784-5-14 Edition 1.0 2010-07 colour inside Industrial communication networks Profiles Part 5-14: Installation of fieldbuses Installation profiles for CPF 14 IEC 61784-5-14:2010(E)
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24110-0 SANS 50354:2003 EN 354:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Lanyards This national standard is the identical implementation
More informationMobile road construction machinery Safety- Part 1: Common requirements. Mobila väganläggningsmaskiner - Säkerhet - Del 1: Allmänna krav
Mobile road construction machinery Safety- Part 1: Common requirements Mobila väganläggningsmaskiner - Säkerhet - Del 1: Allmänna krav The European Standard has the status of a Swedish Standard. This document
More informationISO INTERNATIONAL STANDARD. Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General
INTERNATIONAL STANDARD ISO 15875-1 First edition 2003-12-01 Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General Systèmes de canalisations en plastique
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61511-1 First edition 2003-01 Functional safety Safety instrumented systems for the process industry sector Part 1: Framework, definitions, system, hardware and software requirements
More informationLicensed Copy: Akin Koksal, Bechtel Ltd, 10 December 2002, Uncontrolled Copy, (c) BSI
BRITISH STANDARD BS EN 1289:1998 Incorporating Amendment No. 1 Non-destructive testing of welds Penetrant testing of welds Acceptance levels The European Standard EN 1289:1998, with the incorporation of
More informationD R A F T. ISO/TC 211 N 31xx. ISO/TC 211 Geographic information/geomatics Number of pages: 9
D R A F T ISO/TC 211 N 31xx 2011-05-27 Number of pages: 9 ISO/TC 211 Geographic information/geomatics Title: Source: Resolutions from the 32nd ISO/TC 211 plenary meeting in Delft, The Netherlands, 2011-05-26/27
More informationCEN System - Delegated Decisions Dispatch 23:2017
CEN System - Delegated Decisions Dispatch 23:2017 DDD 23 2017 2017-06-05 Page 1 1 CEN/TC 10... 1 2 CEN/TC 19... 3 3 CEN/TC 47... 4 4 CEN/TC 69... 6 5 CEN/TC 104... 7 6 CEN/TC 107... 8 7 CEN/TC 124... 20
More informationThis document is a preview generated by EVS
TECHNICAL REPORT IEC TR 60825-5 Second edition 2003-06 Safety of laser products Part 5: Manufacturer's checklist for IEC 60825-1 Sécurité des appareils à laser Partie 5: Liste de contrôle du fabricant
More informationISO INTERNATIONAL STANDARD. Packaging Tactile warnings of danger Requirements. Emballages Indications tactiles de danger Exigences
INTERNATIONAL STANDARD ISO 11683 Second edition 1997-10-01 Corrected and reprinted 1998-09-01 Packaging Tactile warnings of danger Requirements Emballages Indications tactiles de danger Exigences A Reference
More informationAustralian Standard. Functional safety Safety instrumented systems for the process industry sector
AS IEC 61511.2 2004 IEC 61511-2:2003 AS IEC 61511.2 Australian Standard Functional safety Safety instrumented systems for the process industry sector Part 2: Guidelines for the application of AS IEC 61511.1
More informationISO INTERNATIONAL STANDARD. Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies
INTERNATIONAL STANDARD ISO 14557 First edition 2002-12-01 Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies Tuyaux de lutte contre l incendie Tuyaux d aspiration et flexibles en
More informationFounding - Magnetic particle testing
Irish Standard Founding - Magnetic particle testing CEN 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus
More informationDraft minutes of the meeting of
Date 2013-07-18 CEN/TC 226/WG 3 N 148 "Vertical signs" Draft minutes of the meeting of CEN/TC 226/WG 3 "Vertical signs on 2013-05-23 in Bergisch-Gladbach participants: Name Richard Adam Christian Bargen
More informationGas Technical Standards Committee
Gas Technical Standards Committee GTSC Annual Report 2009 Scope 1. To advise the NSAI with regard to Irish Standards and Codes of Practice necessary for the transmission distribution and utilisation of
More informationSTANDARDS RELATED MEETING REPORT
STANDARDS RELATED MEETING REPORT REPORT No. : 2285 BY: JP Nhlapo (Standards Writer) and Dr JG Auret (TC31 Mirror Committee chairman): ATTENDANCE AT: IEC TC 31,Subcommittees and WG s CITY: Frankfurt COUNTRY:
More informationSTEEL TUBES AND FITTINGS FOR
IRISH STANDARD I.S. EN 10288:2002 ICS 23.040.10 23.040.40 25.220.60 STEEL TUBES AND FITTINGS FOR National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 ONSHORE AND
More informationFinal Business Plan for a CEN Workshop on
1/6 Final for a CEN Workshop on Humanitarian Mine Action - Test and evaluation - Metal detectors - Part 2: Soil characterisation for metal detector and ground penetrating radar performance TABLE OF CONTENTS
More informationEUROPEAN COMMISSION INDUSTRY AND ENTERPRISES DIRECTORATE-GENERAL AMENDMENT TO :
EUROPEAN COMMISSION INDUSTRY AND ENTERPRISES DIRECTORATE-GENERAL Chemical products and construction Construction AMENDMENT TO : Brussels, 16 th March 2005. M/ 369 EN MANDATE TO CEN/CENELEC CONCERNING THE
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10306:2002 Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams EESTI
More informationBUSINESS PLAN CEN/TC 142 WOODWORKING MACHINES SAFETY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 142 WOODWORKING MACHINES SAFETY EXECUTIVE SUMMARY Business environment largest in the world, covering more than 50% of the world market. CEN TC 142 activity deals with standardization
More informationBUSINESS PLAN. CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
Business Environment BUSINESS PLAN CEN/TC 137 Business Plan Date: 01.09.04 Version: 2 Approved BP Page: 1 CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10893-5 First edition 2011-04-01 Non-destructive testing of steel tubes Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 62885-1 Edition 1.0 2016-08 Surface cleaning appliances Part 1: General requirements on test material and test equipment INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 97.080
More informationValves for natural gas transportation in pipelines Performance requirements and tests
SVENSK STANDARD SS-EN 14141 Fastställd 2003-12-19 Utgåva 1 Rörledningsarmatur Ventiler för rörledningar för naturgas Funktionskrav och provning Valves for natural gas transportation in pipelines Performance
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 12570 First edition 2000-03-15 Hygrothermal performance of building materials and products Determination of moisture content by drying at elevated temperature Performance hygrothermique
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3059 Third edition 2012-12-01 Non-destructive testing Penetrant testing and magnetic particle testing Viewing conditions Essais non destructifs Contrôles par ressuage et contrôles
More information