A B C ABC STRIKE FIRST DRY CHEMICAL, WET CHEMICAL & WATER FIRE EXTINGUISHERS FEATURES SPECIFICATIONS. Limited 6 year warrantee

Transcription

1 STRIKE FIRST DRY CHEMICAL, WET CHEMICAL & WATER S Non corrosive pull pin Completely rechargeable Full hand grip for ease of operation Waterproof stainless steel gauge Anodized aluminum valve Quick release hose Steel cylinder complete with cylinder skirt Cylinder has high corrosion and impact resistant finish (red epoxy) Comes complete with wall bracket Vehicle bracket optional Most parts are interchangeable D-ABC20 D-ABC25V D-ABC5W D5AV340 D-ABC10 D-BC5W D-BC20 D-BC10 D-BC25V Individually packaged Limited 6 year warrantee A B C WOOD TRASH PAPER LIQUIDS GREASE ELECTRICAL EQUIP. CV275 K COMMERCIAL COOKING MEDIA B LIQUIDS GREASE C ELECTRICAL EQUIP. SF-PW SF6K D5AW340-CH DABC2.5V-CH UP-5 Available on D5AV340MD only CV500 ABC BC K A SPECIFICATIONS MODEL DESCRIPTION RATING RANGE DISCHARGE PSI HEIGHT WIDTH DIAMETER WEIGHT FT. TIME (SECS) (Inches) (Inches) (Inches) (LBS / Kg) D-ABC2V 2LB ABC C./VEH BRACKET 1A 5BC /4 4 3/4 3 4 / 1.8 D-ABC2.5V 2.5LB ABC C./VEH BRACKET 1A 10BC /4 6 3/ / 2 D-ABC25V-CH 2.5LB ABC 1A 10BC /4 6 3/ C/W VEHICLE BRKT ** CHROMED ** NEW** D-ABC5W 5LB ABC C./WALL BRACKET 3A 10BC /2 6 3/4 4 1/4 10 1/2 / 4.8 D-ABC5V 5LB ABC C./VEH BRACKET 3A 10BC /2 6 3/4 4 1/4 10 1/2 / 4.8 D5AW340 5LB ABC C./WALL BRACKET 3A 40BC /4 4 1/4 10 1/2 / 4.8 D5AW340-CH 5LB 3A 40BC 3A 40BC /4 4 1/ / 4.8 C/W WALL ** CHROMED ** NEW ** D5AV340 5LB ABC C./VEH BRACKET 3A 40BC /4 4 1/4 10 1/2 / 4.8 D5AV340MD 5LB ABC C./MED BRACKET 3A 40BC /4 4 1/4 10 1/2 / 4.8 D-ABC10 10LB ABC C./WALL BRACKET 6A 80BC /4 9 1/2 5 1/8 19 1/4 / 8.8 D-ABC20 20LB ABC C./WALL BRACKET 10A-120BC /2 7 1/8 35 1/4 / 16.1 D-ABC30 30LB ABC C./WALL BRACKET 10A-120BC /2 7 1/8 35 1/4 / 16.1 D-BC5W 5LB BC C./WALL BRACKET 10BC /4 4 1/4 10 1/2 / 4.8 D-BC5V 5LB BC C./VEH BRACKET 10BC /4 4 1/4 10 1/2 / 4.8 D-BC10 10LB BC C./WALL BRACKET 60BC /4 9 1/2 5 1/8 19 1/4 / 8.8 D-BC20 20LB BC C./WALL BRACKET 80BC /2 7 1/8 35 1/4 / 16.1 SF6K 6 LITRE CLASS" K " 2K /2 17 1/8 21 W/B ** NEW ** SF-PW 2 1/2 GALLON PRESSURE WATER 2A /2 17 1/8 13 ** NEW ** 2 F I R E P R O T E C T I O N

2 PYRO-CHEM STORED PRESSURE DRY, WET CHEM & WATER S ULC Listed ABC multi-purpose (ammonium phosphate) or PDC standard (sodium bicarbonate) dry chemical Easy -to-service (internal spring) valve Squeeze grip with positive on/off operation Suitable for use in temperatures from -65 F to 120 F (-54 C to 49 C) Clear anodized aluminum valve Units supplied with wall hanging bracket 2-1/2 and 5 lb. units also available with vehicle bracket ABC025V ABC05V340 ABC05W ABC10 ABC20 PW K-ONE Heavy-duty running board bracket available for lbs. units (sold separately) Six-year limited warranty A B C WOOD TRASH PAPER LIQUIDS GREASE ELECTRICAL EQUIP. K COMMERCIAL COOKING MEDIA B LIQUIDS GREASE C ELECTRICAL EQUIP. PDC05W PDC10 PDC20 PKD10 PKD20 RL-300 ABC BC K A SPECIFICATIONS MODEL ULC EFFECTIVE CAPACITY DISCHARGE DIAMETER WIDTH HEIGHT NO. RATING RANGE (FT / M) LBS / KG TIME (SEC) IN / CM IN / CM IN / CM ABC025V 1-A:10-B:C 8-10 / / / / / 40.6 ABC05W 3-A:10-B:C / / / / / 41.9 ABC05V (W/VEHICLE BRACKET) 3-A:10-B:C / / / / / 41.9 ABC05W340 3-A:40-B:C / / / / / 45.2 ABC05V340 (W/VEHICLE BRACKET) 3-A:40-B:C / / / / / 45.2 ABC10 4-A:60-B:C / / / / / 50.8 ABC20 4-A:60-B:C / / / / / 61.0 PDC10 60-B:C / / / / / 50.8 PDC B:C / / / / / 61.0 PKD10 80-B:C / / / / / 50.8 PKD B:C / / / / / 61.0 K-ONE 2 -K 8-10 / L (1.59 GAL) 54 7 / / / 54.0 RL-160 RECHARGE LIQUID 6L RL-300 RECHARGE LIQUID 12L PW 2A / / / / 64.8 RL-160 F I R E P R OT E C T I O N 3

3 SENTRY STORED PRESSURE DRY CHEMICAL S C20 ULC Listed ABC multi-purpose (ammonium phosphate) or PDC standard (sodium bicarbonate) dry chemical Easy -to-service (internal spring) valve Squeeze grip with positive on/off operation Suitable for use in temperatures from -65 F to 120 F (-54 C to 49 C) Clear anodized aluminum valve Units supplied with wall hanging bracket 2-1/2 and 5 lb. units also available with vehicle bracket Heavy-duty running board bracket available for lbs. units (sold separately) Six-year limited warranty AA105 AA20 A B C WOOD TRASH PAPER LIQUIDS GREASE ELECTRICAL EQUIP. AA05W PK10S B LIQUIDS GREASE C ELECTRICAL EQUIP. C10S PK5 AA25V SPECIFICATIONS ABC BC K A MODEL ULC EFFECTIVE CAPACITY DISCHARGE DIAMETER WIDTH HEIGHT NO. RATING RANGE (FT / M) LBS / KG TIME (SEC) IN / CM IN / CM IN / CM AA25V 1-A:10-B:C 8-10 / / / / / 40.6 AA05W 3-A:10-B:C / / / / / 41.9 AA05V 3-A:10-B:C / / / / / 41.9 AA05W340 3-A:40-B:C / / / / / 45.2 AA05V340 3-A:40-B:C / / / / / 45.2 AA10S 4-A:60-B:C / / / / / 50.8 AA20 4-A:60-B:C / / / / / 61.0 C10S 60-B:C / / / / / 50.8 C B:C / / / / / 61.0 PK10S 80-B:C / / / / / 50.8 PK B:C / / / / / 61.0 K-GUARD 2 -K 8-10 / L (1.59 GAL) 54 7 / / / 54.0 APW 2A / / / / F I R E P R O T E C T I O N

4 PYRO-CHEM FE-36 CLEAN-AGENT S FE-36 agent is EPA accepted (SNAP) - zero ozone depletion potential and no scheduled phase-out Clean agent is safe for delicate electronics - nonconductive, residue-free no thermal shock Meets FAA minimum performance standard (MPS) for handheld fire extinguishers on civilian transport category aircraft (FE-05, FE-09, and FE-13 Only) Very low in toxicity - LOAEL of 15% is above extinguishing concentration Seamless welded steel shell with tough polyester-urethane finish Suitable for use in temperatures form -40 C to 49 C (-40 F to 120 F) Six-year limited warranty A B C WOOD TRASH PAPER LIQUIDS GREASE ELECTRICAL EQUIP. B LIQUIDS GREASE BC ABC C ELECTRICAL EQUIP. APPLICATIONS FE-36 clean agent extinguishers are designed for protection of light and ordinary hazards. These compact and portable extinguishers are suited for both industrial and commercial fire protection needs. FE-13NM PYRO-CHEM CLASS D SODIUM CHLORIDE S Typical applications include: Computer rooms Essential communication areas Irreplaceable data, document, and art storage rooms Laboratories Sensitive / expensive equipment Also Available in Non-Magnetic Model FE-13NM specifically designed for use in MRI imaging rooms. SPECIFICATIONS MODEL ULC EFFECTIVE CAPACITY DISCHARGE DIAMETER WIDTH HEIGHT NO. RATING RANGE TIME FE-02 2-B:C 8-10 FT ( M) 2.5 LBS (1.1 KG) 9.0 SECONDS 3.38 IN (8.6 CM) 5.75 IN (14.6 CM) IN (36.2 CM) FE-05 5-B:C FT ( M) 4.75 LBS (2.2 KG) 8.6 SECONDS 4.44 IN (11.3 CM) 8.5 IN (21.6 CM) 17 IN (43.2 CM) FE-09 1-A:10-B:C FT ( M) 9.5 LBS (4.3 KG) 9.5 SECONDS 7 IN (17.8 CM) 9 IN (22.9 CM) IN (47.6 CM) FE-13 2-A:10-B:C FT ( M) LBS (6.0 KG) 13.5 SECONDS 7 IN (17.8 CM) 9.5 IN (24.1 CM) 22.5 IN (57.2 CM) FE-13NM 1-A:10-B:C FT ( M) LBS (6.0 KG) 13.5 SECONDS 7 IN (17.8 CM) 9 IN (22.9 CM) 25.5 IN (64.8 CM) FE-13 FE-09 FE-05 FE-02 D Class D 6 Year Warranty Stored Pressure Design Dependable Drawn Steel Cylinders Special corrosion resistant yellow (Class D) color coded paint finish All Metal Valve Construction Temperature Range -40 F to 120 F Unique soft flow extension applicator plus built in long range nozzle Large Loop Stainless Steel Pull Pin Bar Coded and Bi-lingual Labels The soft flow extension applicator is particularly suited for fighting Class D fires. It keeps the operator s hands away from the extreme heat and prevents inhalation of toxic fumes caused by burning material. The easily controlled, even discharge provides a non-dispersing application of the agent. The applicator may be quickly detached to provide a straight stream of chemical where greater range, a narrow discharge pattern or a lobbing effect is required. MODEL D-30 contains a special blended Sodium Chloride based dry powder extinguishing agent. Heat from the fire causes it to cake and form a crust excluding air and dissipating heat from burning metal. Metal fires involving magnesium, sodium, potassium and sodium-potassium alloys can be successfully extinguished with this extinguisher. There is data showing that zirconium, uranium, titanium, and powdered aluminum fires can be controlled and extinguished with this unique extinguisher. EXTINGUISHING CAPACITY AVAILABLE IN 150 LB. WHEELED OR STATIONARY Magnesium Chips: 4 ft2 and/or 6 lbs. of metal Sodium or Potassium Spill: 5 ft2 and/or 5 lbs.of metal Sodium or Potassium Spill Depth Over 1/2 : 3 ft2 and or 6 lbs. of metal Sodium Potassium Alloy Spill: 3 ft2 and/or 2 lbs. of metal MODEL ULC EFFECTIVE CAPACITY DISCHARGE DIAMETER WIDTH HEIGHT NO. RATING RANGE TIME D-30 D 3-6 FT (1-2 M) 30 LBS (13.6 KG) 24 SECONDS 13 IN (33 CM) 35 IN (88.9 CM) F I R E P R OT E C T I O N 5

5 PYRO-CHEM CARBON DIOXIDE HAND PORTABLE AND WHEELED S Simple, trouble-free operation and maintenance Features upright positive on-off operation utilizing squeeze-grip activation Non-corrosive, non-conductive, clean extinguishing agent leaves no residue Strong, impact-resistant discharge horn One person operation Suitable for use in temperatures form -40 C to 49 C (-40 F to 120 F) Six-year limited warranty BC LIQUIDS GREASE B C ELECTRICAL EQUIP. SPECIFICATIONS C02-15 C02-20 C02-10 C C C02-50 MODEL ULC EFFECTIVE CAPACITY DISCHARGE DIAMETER WIDTH HEIGHT NO. RATING RANGE TIME CO B:C M (5-6 FT) 2.3 KG (5 LBS) SECONDS 13.5 CM (5.3 IN) 25.4 CM (10 IN) 48.0 CM (18.9 IN) CO B:C M (5-6 FT) 4.5 KG (10 LBS) SECONDS 17.5 CM (6.9 IN) 31.8 CM (12.5 IN) 54.1 CM (21.3 IN) CO B:C M (7-10 FT) 6.8 KG (15 LBS) SECONDS 17.5 CM (6.9 IN) 31.8 CM (12.5 IN) 70.9 CM (27.9 IN) C B:C M (7-10 FT) 9.1 KG (20 LBS) SECONDS 20.3 CM (8 IN) 34.3 CM (13.5 IN) 71.1 CM (28 IN) CO B:C M (10-16 FT) 22.7 KG (50 LBS) 35 SECONDS 66.0 CM (26 IN) 55.9 CM (22 IN) CM (52 IN) CO B:C M (10-16 FT) 45.4 KG (100 LBS) 70 SECONDS 76.2 CM (30 IN) 55.9 CM (22 IN) CM (52 IN) ALUMINUM CYLINDER - CARBON DIOXIDE S Squeeze grip operation Glossy red paint finish Chrome plated valve is precision machined from forged brass complete with stainless steel top and bottom handles The finest CO2 valve manufactured in the world today Easily operated and recharged Strong impact resistant horn LIQUIDS GREASE B C ELECTRICAL EQUIP. Aluminum cylinder complete with wall bracket Individually packaged 5C02 15C02 20C02 10C02 BC MODEL DESCRIPTION RATING RANGE DISCHARGE CAPACITY HEIGHT WIDTH DIAMETER WEIGHT FT. TIME (SECS) (LBS) (INCHES) (INCHES) (INCHES) (LBS./Kg) 5CO2 5LB CO2 C/WALL BRACKET 5 BC lbs /8 18 1/4 / CO2 10LB CO2 C/WALL BRACKET 10 BC lbs 27 1/ /8 37 1/2 / 17 15CO2 15LB CO2 C/WALL BRACKET 10 BC lbs /8 7 1/8 47 / CO2 20LB CO2 C/WALL BRACKET 10 BC lbs 26 3/4 11 3/ /8 / F I R E P R O T E C T I O N

6 RED LINE CARTRIDGE OPERATED PORTABLE & WHEELED S Rugged, durable, reliable fire protection Ergonomically designed for maximum operator performance Meets or exceeds requirements of ANSI/UL 299 and 711 Simple and safe operation Maintenance checks can be easily made on every moving part Field rechargeable I-K-20-G CR-I-K-350-D A B C WOOD TRASH PAPER LIQUIDS GREASE ELECTRICAL EQUIP. LIQUIDS GREASE B C ELECTRICAL EQUIP. S - ANSUL REDLINE CARTRIDGE OPERATED RED LINE Wheeled dry chemical fire extinguishers are made specifically to protect people and property in areas where the potential for large-scale fires is always present. Airports, loading docks, steel and iron mills, paint spray booths, dip and quench tanks, offshore platforms, loading racks, fuel storage, and heavy manufacturing areas benefit from the protection offered by these industrial high-hazard fire extinguishers These heavy-duty wheeled units have greater extinguishing agent capacities than hand portable fire extinguishers, yet are highly mobile and can be fully operated by one person. Large diameter steel wheels quickly and more easily move the unit to the source of the fire, while the quick-opening valve option allows for fast, one-step actuation. Wheeled extinguishers are available with dry chemical or special dry agent powders to provide maximum protection for many types of fire hazards. SPECIFICATIONS LISTING TYPE , ULC, 5 LB., ULC BC , ULC, A ULC ABC , ULC, 5 LB., LT-A ULC ABC , ULC, 5 LB., LT-K ULC PK , ULC, 10 LB., I-A-10-G ULC ABC , ULC, 10 LB., LT-I-A-10-G ULC ABC , ULC, 10 LB., LT-I-K-10-G ULC PK , ULC, 10 LB., LT-I-10-G ULC BC , ULC, 10 LB., CR-I-A-10-G ULC ABC , ULC, 20 LB., I-20-G ULC BC , ULC, 20 LB., I-A-20-G ULC ABC , ULC, 20 LB., HF-I-A-20-G ULC ABC , ULC, 20 LB., LT-I-A-20-G ULC ABC , ULC, 20 LB., CR-I-A-20-G ULC ABC , ULC, 20 LB., LT-I-20-G ULC BC , ULC, 20 LB., RP-I-A-20-G ULC ABC , ULC, 20 LB., RP-LT-I-A-20-G ULC ABC , ULC, 20 LB., CR-LT-I-A-20-G ULC ABC , ULC, 20 LB., LT-I-A-20-G ULC ABC W/ METAL GUARD , ULC, 20 LB., LT-I-K-20-G ULC PK , ULC, 20 LB., HF-I-K-20-G 38 1 ULC PK , ULC, 20 LB., CR-LT-I-K-20-G ULC PK , ULC, 20 LB., CR-LT-RP-A-20-G ULC ABC , ULC, 30 LB., I-A-30-G ULC ABC , ULC, 30 LB., HF-I-A-30-G ULC ABC , ULC, 30 LB., LT-I-K-30-G ULC PK , ULC, 30 LB., HF-I-K-30-G 55 1 ULC PK , ULC, 30 LB., LT-I-A-30-G ULC ABC , ULC, 30 LB., MX-I-30-G 58 1 ULC D , ULC, 30 LB., LT-I-30-G ULC BC SPECIFICATIONS MODEL PRODUCT DESCRIPTION WEIGHT LISTING TYPE , WHEELED 150 LB., CR-LR-I-K-150-C 453 ULC PK , WHEELED 150 LB., CR-I-A-150-C 483 ULC ABC , WHEELED 150 LB., 481 ULC PK CR-LT-RT-K-150-C , WHEELED 150 LB., CR-LT-I-K-150-C 453 ULC PK , WHEELED 150 LB., CR-LT-I-A-150-C ULC ABC , WHEELED 150 LB., CR-I-K-150-C 453 ULC PK , WHEELED 150 LB., CR-I-K-150-D 329 ULC PK , WHEELED 150 LB., CR-I-A-150-D ULC ABC , WHEELED 150 LB., CR-LT-I-A-150-D ULC ABC (STOCK- NO OPTIONS) , WHEELED 150 LB., CR-LT-I-A-150-D ULC ABC , WHEELED 150 LB., CR-LT-I-K-150-D 329 ULC PK , WHEELED 150 LB., CR-I-150-D 354 ULC BC , WHEELED 350 LB., CR-LT-I-A-350-C ULC ABC , WHEELED 350 LB., CR-I-K-350-C 922 ULC PK , WHEELED 350 LB., CR-I-LT-K-350-C 922 ULC PK , WHEELED 350 LB., CR-LT-I-K-350-D 692 ULC PK , WHEELED 350 LB., CR-I-350-D 770 ULC BC , WHEELED 350 LB., CR-I-A-350-D ULC ABC , WHEELED 350 LB., CR-I-K-350-D 720 ULC PK , WHEELED 350 LB., CR-LT-I-A-350-D ULC ABC , WHEELED 50 LB., CARBON DIOXIDE, 210 ULC CO2 CD-50-D , WHEELED 100 LB., CARBON DIOXIDE, 415 ULC CO2 CD-100-D-1 ** SUFFIX LT INDICATES LOW TEMP NITROGEN CARTRIDGE ** SUFFIX CR INDICATES CORROSION RESISTANT COATING F I R E P R OT E C T I O N 7

7 HEAVY & MEDIUM DUTY WALL AND VEHICLE BRACKETS The Heavy Duty brackets are constructed of all welded steel, ideal for use on larger mobile equipment or in areas that require a more secure mount. Fire extinguishers (5lb, 10lb, 20lb & 30lb) can be quickly & easily removed with the aid of the pull pin locking device. The Medium Duty bracket is designed for applications that demand a stronger & more secure fit than the standard vehicle bracket. Both models feature an all steel platform base & dual stainless steel quick release straps. Ideal for use on lift trucks, construction equipment & warehouse racking. S - HEAVY DUTY VEHICLE BRACKETS UP-10 UP-5 HDVB-1 HDVB-2 HDVB-3 HDVB-4 HDVB-1 H.D VEHICLE BRKT FOR 4"-4 1/2" DIA CYLINDER 6 1 HDVB-2 H.D VEHICLE BRKT FOR 4 3/4"-5 1/4" DIA CYL 6 1 HDVB-3 H.D VEHICLE BRKT FOR 5 1/2"-6" DIA CYLINDER 6 1 HDVB-4 H.D VEHICLE BRKT FOR 6 1/4"-7 1/8" DIA CYL 8 1 S - MEDIUM DUTY VEHICLE BRACKETS UP-5 5LB DOUBLE STRAP VEHICLE BRACKET UP-10 10LB DOUBLE STRAP VEHICLE BRACKET STRIKE FIRST WALL BRACKETS & ACCESSORIES Product! Plastic Cabinet with body and frame are injection molded in red virgin high-impact crystal polystyrene of.110 wall thickness with ultra-violet inhibitors, virgin acrylic Plaskolite panel of.080 thickness. Chromium plated brass safety lock and key with weatherproof protective lock cover and polypropylene plastic injected molded hammer. the Centurion fits ALL 10 lb and 20 lb ABC fire extinguishers, fully assembled portable fire extinguisher stand (extinguisher not included). Lightweight molded polyethylene for maximum weatherability Equipped with required safety decals Environmentally safe sand filled base (10 lb has 20 lbs of sand, 20 lb has 25 lb sand base) Top and bottom 16 ga steel Galva Coat brackets are powder coated Faultless casters for easy mobility Red bodies shipped with red hammer and lock covers CENTURION STANDS CENT-10 10LB STAND WITH CABINET 78 1 CENT-20 20LB STAND WITH CABINET 96 1 HEAVY DUTY 30LB CART HD-CART 10LB STAND WITH CABINET 32 1 CENT-10 CENT-20 HD-CART STRIKEFIRST - WALL BRACKETS (BLACK) C /2-5LB WALL BRACKET C LB WALL BRACKET C LB WALL BRACKET C LB WALL BRACKET F I R E P R O T E C T I O N

8 UNIVERSAL WALL BRACKETS Polyester Powder Coated Red for durability & visibility. 6 sizes accommodate all mfg fire extinguishers sizes from 5lb - 30lb Designed specifically to fit all mfg brands of portable fire extinguishers including: Amerex Badger Kidde Buckeye WH20 WH15 WH5 5525A 1521A BRACKETS - NOSREDNA S - UNIVERSAL WALL BRACKETS (RED) WH2 UNIVERSAL WALL HOOK BRACKET FOR 2 1/2 GAL PRESSURE WATER WH5 UNIVERSAL WALL HOOK BRACKET FOR 5 LB D/C & CO WH15 UNIVERSAL WALL HOOK BRACKET FOR LB WH20 UNIVERSAL WALL HOOK BRACKET FOR 20 LB BRACKETS - NOSREDNA S - UNIVERSAL WALL HANGER BRACKETS (RED) 1521A UNIVERSAL WALL HANGER BRACKET FOR AMEREX 5LB A UNIVERSAL WALL HANGER BRACKET FOR AMEREX LB 0.5 UNIVERSAL HEAVY DUTY VEHICLE BRACKETS Polyester Powder Coated Red for durability & visibility. Large cotter pin with bilingual pull instructions 3 sizes accommodate all mfg fire extinguishers sizes from 5lb - 30lb Individually cartoned Designed specifically to fit all mfg brands of portable HD-10 fire extinguishers including: HD-20 Amerex Badger HD-5 Kidde Buckeye BRACKETS - NOSREDNA S - UNIVERSAL HEAVY DUTY VEHICLE BRACKETS (RED) HD-5 H.D VEHICLE BRKT FOR 4"-4 1/2" DIA CYLINDER 5 1 HD-10 H.D VEHICLE BRKT FOR 4 3/4"-5 1/4" DIA CYL 6 1 HD-20 H.D VEHICLE BRKT FOR 5 1/2"-7" DIA CYLINDER 6 1 F I R E P R OT E C T I O N 9

9 & HOSE COVERS Durable Polyester Fire Extinguisher & Hose Covers. Available in French, English & Bilingual labeling. The interior coated Polyester material provides added strength that helps prevent the covers from UV fading and cracking from harsh exposure to chemicals, salt spray and extreme temperatures. The gauge viewing window is thermally sealed, not stitched to help prevent moisture penetration. Ultimately the polyester material provides a longer service life for both the cover & the safety equipment. KEEP CLEAR KEEP CLEAR EXTINCTEUR D INCENDIE EXTINCTEUR D INCENDIE EXTGR. EXTINCTEUR D INCENDIE HD-EFEC-10 HD-FFEC-10 HD-BFEC-10 KEEP CLEAR KEEP CLEAR HD-EFEC-30 KEEP CLEAR KEEP HOSE CLEAR EXTINCTEUR D INCENDIE EXTINCTEUR D INCENDIE EXTGR. EXTINCTEUR D INCENDIE HOSE KEEP CLEAR EXTGR. EXTINCTEUR D INCENDIE HD-EFEC-20 HD-FFEC-20 HD-BFEC-20 HD-EFHR-18 HD-EFHC-75 HD-EFEC-5 EXTGR. EXTINCTEUR D INCENDIE HOSE KEEP CLEAR FOR USE BY TRAINED PERSONNEL ONLY E-FHC-100-TP COVER Available in French, English & Bilingual Available in 5lb,10lb,20lb & 30lb Sizes Models with window are heat sealed for added water resistance. HOSE RACK & REEL COVER Red Durable Polyester Material Available in 75 & 100 (Rack) & 18 & 24 Diameter (Reel) Available with For Use By Trained Personnel Only Writing (Province of Ontario) HEAVY DUTY RED COVERS MODEL PRODUCT DESCRIPTION LANGUAGE WINDOW HD-EFEC-5 5LB COVER WITH WINDOW NONE YES HD-EFEC5NW 5LB COVER NONE NO HD-EFEC10 ENGLISH 10LB COVER C/W WINDOW ENGLISH YES HD-EFEC10NW ENGLISH 10LB COVER NO WINDOW ENGLISH NO HD-BFEC10 BILINGUAL 10LB COVER C/W WINDOW BILINGUAL YES HD-BFEC10NW BILINGUAL 10LB COVER NO WINDOW BILINGUAL NO HD-FFEC10 FRENCH 10LB COVER C/W WINDOW FRENCH YES HD-FFEC10NW FRENCH 10LB COVER NO WINDOW FRENCH NO HD-EFEC20 ENGLISH 20LB COVER C/W WINDOW ENGLISH YES HD-EFEC20NW ENGLISH 20LB COVER NO WINDOW ENGLISH NO HD-BFEC20 BILINGUAL 20LB COVER C/W WINDOW BILINGUAL YES HD-BFEC20NW BILINGUAL 20LB COVER NO WINDOW BILINGUAL NO HD-FFEC20 FRENCH 20LB COVER C/W WINDOW FRENCH YES HD-FFEC20NW FRENCH 20LB COVER NO WINDOW FRENCH NO HD-EFEC30 ENGLISH 30LB COVER C/W WINDOW ENGLISH YES HD-EFEC30NW ENGLISH 30LB COVER NO WINDOW ENGLISH NO HD-BFEC30 BILINGUAL 30LB COVER C/W WINDOW BILINGUAL YES HD-BFEC30NW BILINGUAL 30LB COVER NO WINDOW BILINGUAL NO HD-FFEC30 FRENCH 30LB COVER C/W WINDOW FRENCH YES HD-FFEC30NW FRENCH 30LB COVER NO WINDOW FRENCH NO HOSE RACK & REEL COVERS MODEL PRODUCT DESCRIPTION BI-LINGUAL FRENCH HD-EFHR-18 18" DIA HOSE REEL COVER N/A N/A HD-EFHR-24 24" DIA HOSE REEL COVER N/A N/A HD-EFHC FOOT HOSE RACK COVER N/A N/A HD-EFHC FOOT HOSE RACK COVER N/A N/A HD-EFHC-100-TP 100 FOOT HOSE RACK COVER - TRAINED PERSONS ONLY N/A N/A HD-EFHC-75-TP 75 FOOT HOSE RACK COVER - TRAINED PERSONS ONLY N/A N/A 1 0 F I R E P R O T E C T I O N

10 SURFACE MOUNTED CABINETS CLASSIC SERIES Complete with cylinder lock keyed alike Baked white enamel finish Acrylic plastic viewing panel Break glass hammer and chain Break glass sticker Model C-100 Accommodated 5 lb dry chemical Model C-999 Accommodates 10 lb dry chemical Model C-104 Accommodates 20 lb dry chemical or a 10 lb CO2,and 2 1/2 gal. pressure water Also available in Red finish and Stainless Steel Product! C-100 C-999 C-999 SS C-104 SURFACE MOUNT CABINETS MODEL TYPE DESCRIPTION REPLACEMENT HEIGHT WIDTH DEPTH S.STEEL RED WHITE PLEXI (INCHES) (INCHES) (INCHES) C-100-SS C-100-R C-100 SURFACE ACCOMMODATES 5LB. DRY CHEMICAL PF C-999-SS C-999-R C-999 SURFACE ACCOMMODATES 10LB. DRY CHEMICAL PF C-104-SS C-104-R C-104 SURFACE ACCOMMODATES 20LB DRY CHEMICAL PF /8 14 1/8 9 HEAVY DUTY OUTDOOR CABINETS Model OEC 16 Gauge cold-rolled steel Welded construction Weather proof gasket around door jam Sloped roof Hardware: Full-length stainless steel piano hinge Keyed paddle latch (NEW FEATURE) Baked red acrylic enamel over phosphate treated steel Full metal door OEC-10 Exterior Dimensions (H x W x D) (24 x 10 x 8) OEC Exterior Dimensions (H x W x D) (28 x 14 x 10) HEAVY DUTY OUTDOOR CABINET MODEL TYPE DESCRIPTION HEIGHT WIDTH DEPTH (INCHES) (INCHES) (INCHES) OEC SURFACE ACCOMMODATES UP TO 30 LB. DRY CHEMICAL OEC10 SURFACE ACCOMMODATES UP TO 10 LB. DRY CHEMICAL F I R E P R OT E C T I O N 11

11 NL114 NL114 NL114 NL125 NL116 NL125 NL116 NL125, NL300 NL116 NL108 NL105 NL105 NL108 NL105 NL300 NL108 SAFETY SIGNAGE SELF ADHESIVE (NL) SIGNS SELF ADHESIVE (NL) SIGNS Self Adhesive Vinyl signs are silk screened with UV ink then clear laminated for durability and fade resistance. Available in both white vinyl (NL Series) and glow-in-the-dark photoluminescent (NL-P Series). MODEL MODEL DESCRIPTION (WHITE VINYL) (PHOTOLUMINESCENT) NL108 NL108-P 4 X 12 FIE SELF ADHESIVE NL125 NL125-P 4 X 18 HOSE SIGN SELF ADHESIVE NL105 NL105-P 4 X 4 INSIDE SELF ADHESIVE NL144 NL144-P 8 X 12 SELF ADHESIVE NL300 NL300-P 9 ¾ X 2 HOSE CABINET DECAL (INTERIOR) NL303 NL303-P 9 ¾ X 2 HOSE CABINET DECAL (EXTERIOR) NL2S30 NL2S30-P 4 X 7 PULL STATION DECAL (2 STAGE, W/ ELEVATOR) NLE20 NLE20-P 4 X 7 PULL STATION DECAL (WITHOUT ELEVATOR) NLS10 NLS10-P PULL STATION DECAL (WITH ELEVATOR) RIGID PLASTIC (RP) SIGNS Rigid Plastic Signs are single sided screen printed UV inks. Rigid tough plastic signs (1/32 thick) with predrilled mounting holes. RIGID PLASTIC SIGNS MODEL NL108-RP NL125-RP NL114-RP DESCRIPTION 4 X 12 SIGN, RIGID PLASTIC WITH PREDRILLED MOUNTING HOLES 4 X 18 HOSE CABINET SIGN, RIGID PLASTIC WITH PREDRILLED MOUNTING HOLES 8 X 12 SIGN, RIGID PLASTIC WITH PREDRILLED MOUNTING HOLES PERPENDICULAR WALL MOUNT (PWM) SIGNS PWM Perpendicular Wall Mount Signs are double sided screen printed with UV Inks. Rigid tough plastic (1/32 thick) mounts perpendicular to wall with predrilled mounting holes. H O S E H O S E H O S E NL300 ALL PACKS WEIGHT PACK 1 LBS. 25 INSIDE NL105 SHER TI N XT EX NG N INSIDE INSID NL105 R INSIDE U SH UI S SHE H NL105 ENL105 HER S SHE PERPENDICULAR WALL MOUNT SIGNS MODEL NL108-RP NL125-RP NL114-RP DESCRIPTION 4 X 12 SIGN, RIGID PLASTIC WITH PREDRILLED MOUNTING HOLES 4 X 18 HOSE CABINET SIGN, RIGID PLASTIC WITH PREDRILLED MOUNTING HOLES 8 X 12 SIGN, RIGID PLASTIC WITH PREDRILLED MOUNTING HOLES THREE DIMENSIONAL (3D) SIGNS 3D signs are screen printed with UV inks. Rigid tough plastic (1/32 thick) mounts to wall easily with predrilled mounting holes. PERPENDICULAR WALL MOUNT SIGNS MODEL NL182-3D NL108-3D DESCRIPTION 5 X 6 WITH PICTORIAL, WHITE ON RED 4 X 12 WITH ARROW, WHITE ON RED NL125 SHER T XTIN EX G UI HER GUISHE INSIDE INSIDE N NL144 HER NG GUISHE INSIDE NL108 HER HER HER XTIN XT EX NGU ISH E R ER ISH E U ISH E IN CASE OF UPON DISCOVERY OF LEAVE AREA IMMEDIATELY. CLOSE ALL DOORS BEHIND YOU. YELL ACTIVATE ATE THE ALARM SYSTEM, USE THE PULL STATION TION CALL DEPARTMENT DIAL ( FROM A SAFE LOCATION ) USE EXIT TO LEAVE THE BUILDING. DO NOT USE ELEVATORS UPON HEARING ALARM IF CONTINUOUS SIGNAL LEAVE BUILDING VIA NEAREST EXIT. CLOSE ALL DOORS BEHIND YOU. IF INTERMITENT SIGNAL PREPARE TO LEAVE BUILDING. LISTEN TO ANNOUNCEMENTS/INSTRUCTIONS CAUTION IF SMOKE IS HEAVY IN THE CORRIDOR IT MAY BE SAFER TO STAY IN YOUR AREA. CLOSE DOOR AND PLAXE A WET TOWEL AT BASE OF DOOR. IF YOU ENCOUNTER SMOKE IN STAIRWAY, USE ALTERNATE EXIT OR FIND REFUGE IN NEAREST SUITE REMAIN CALM IN CASE OF UPON DISCOVERY OF LEAVE AREA IMMEDIATELY. CLOSE ALL DOORS BEHIND YOU. YELL ACTIVATE ATE THE ALARM SYSTEM, USE THE PULL STATIONTION CALL DEPARTMENT DIAL ( FROM A SAFE LOCATION ) USE EXIT TO LEAVE THE BUILDING. DO NOT USE ELEVATORS UPON HEARING ALARM IF CONTINUOUS SIGNAL LEAVE BUILDING VIA NEAREST EXIT. CLOSE ALL DOORS BEHIND YOU. IF INTERMITENT SIGNAL PREPARE TO LEAVE BUILDING. LISTEN TO ANNOUNCEMENTS/INSTRUCTIONS CAUTION IF SMOKE IS HEAVY IN THE CORRIDOR IT MAY BE SAFER TO STAY IN YOUR AREA. CLOSE DOOR AND PLAXE A WET TOWEL AT BASE OF DOOR. IF YOU ENCOUNTER SMOKE IN STAIRWAY, USE ALTERNATE EXIT OR FIND REFUGE IN NEAREST SUITE REMAIN CALM NL182-3D NLS10 NL F I R E P R O T E C T I O N

12 SAFETY SIGNAGE H OS E RSBL125 HOSE FOR USE BY TRAINED PERSONS ONLY E X T I N C T E U R RSRP108 RSBL300 E X TI N G UI S H ER RSBL108 INSIDE SELF ADHESIVE (BL) SIGNS Self Adhesive Vinyl signs are silk screened with UV ink then clear laminated for durability and fade resistance SELF ADHESIVE SIGNS MODEL DESCRIPTION WEIGHT (LBS) PACK RSBL108 4"X12" SIGN SELF ADHESIVE 1 25 RSBL125 4"X18 HOSE SIGN SELF ADHESIVE 1 25 RSBL105 4"X4" INSIDE SELF ADHESIVE 1 25 RSBL114 8"X12" SIGN SELF ADHESIVE 1 25 RSBL /4" X 2" HOSE FOR USE BY TRAINED PERSONS ONLY (INSIDE GLASS) 1 25 RSBL /4" X 2" HOSE FOR USE BY TRAINED PERSONS ONLY 1 25 RIGID PLASTIC (RP) SIGNS Rigid Plastic Signs are single sided screen printed with UV inks. Rigid tough plastic ( 1/32" thick) mounts to wall easily with predrilled mounting hole. RP RIGID PLASTIC SIGNS WITH PREDRILLED MOUNTING HOLES MODEL DESCRIPTION WEIGHT (LBS) PACK RSRP108 4"X12" SIGN RIGID PLASTIC - 4 PREDRILLED HOLES 1 25 RSRP125 4"X18 HOSE SIGN RIGID PLASTIC - 4 PREDRILLED HOLES 1 25 RSRP114 8"X12" SIGN RIGID PLASTIC - 4 PREDRILLED HOLES 1 25 E X TI N G UI S H ER RSPTD182 RSBL105 PERPENDICULAR WALL MOUNT (PWM) SIGNS PWM Perpendicular Wall Mount Signs are double sided screen printed with UV inks. Rigid tough plastic (1/32" thick) mounts perpendicular to wall with predrilled mounting hole. PWM 90 DEG PERPENDICULAR WALL MOUNT PLASTIC SIGNS MODEL DESCRIPTION WEIGHT (LBS) PACK RSPWM108 4"X12" SIGN RIGID PLASTIC - 2 PREDRILLED HOLES 1 25 RSPWM125 4"X18 HOSE SIGN RIGID PLASTIC - 2 PREDRILLED HOLES 1 25 RSPWM114 8"X12" SIGN RIGID PLASTIC - 2 PREDRILLED HOLES 1 25 RSPWM114 THREE DIMENSIONAL (3D) SIGNS 3D Signs are screen printed with UV inks. Rigid tough plastic (1/32" thick) mounts to wall easily with predrilled mounting holes. Product! 3D RIGID PLASTIC SIGNS MODEL DESCRIPTION WEIGHT (LBS) PACK RSPTD182 5"X6" WITH PICTORIAL WHITE ON RED 1 25 RSPTD108 4" X 12" WITH ARROW RED ON WHITE 1 25 RSPTD112 12" X 8" EXIT SIGN 1 25 RSPTD156 12"X10" ALARM (WITH ARROW DOWN)SIGN 1 25 FL-EDC FE-EDC Studies have shown when information is provided in large easily legible text in highly frequented areas the information is 75% more likely to be retained and applied HOW - TO EDUCATIONAL SAFETY SIGNS MODEL DESCRIPTION WEIGHT (LBS) PACK FE-EDC USE HOW-TO EDUCATIONAL SAFETY SIGN 1 1 FL-EDC FLAMMABLE LIQUIDS SAFE HANDLING HOW-TO EDUCATIONAL SAFETY 1 1 F I R E P R OT E C T I O N 13

13 ARCHITECT SERIES - SURFACE, RECESSED AND SEMI-RECESSED SR-117 Available in grey or white baked enamel or stainless steel satin finish Full glass door or full metal door Comes standard with Plexi Glass SR-108 R-107 Standard Models Include: Full Glass Front and Grey Enamel Finish Custom Fronts: FM - Full Metal BG - Break Glass Options SR-117 (14 1/2 x 30 x 4) semi recessed bubble canopy extinguisher cabinet Break glass door and lock Custom Finishes: SS - Stainless Steel R - Red Enamel W - White Enamel Dimensional Illustrations Available Upon Request ARCHITECT SERIES MODEL TYPE DESCRIPTION WIDTH HEIGHT DEPTH TB NO. (INCHES) (INCHES) (INCHES) (INCHES) (INCHES) SR-105 SEMI-RECESSED ACCOMMODATES 5 LB DRY CHEMICAL (4 WALL) SR-106 SEMI-RECESSED ACCOMMODATES 5-6 LB DRY CHEMICAL R-107 RECESSED ACCOMMODATES 10 LB DRY CHEMICAL SR-108 SEMI-RECESSED ACCOMMODATES 10 LB DRY CHEMICAL (4 WALL) R-109 RECESSED ACCOMMODATES 2 1/2 GAL PRESSURE WATER R-110 RECESSED ACCOMMODATES 2 1/2 GAL PRESSURE WATER OR 20 LB DRY CHEMICAL R-111 SURFACE ACCOMMODATES 2 1/2 GAL PRESSURE WATER R-112 SURFACE ACCOMMODATES 2 1/2 GAL PRESSURE WATER OR 20 LB DRY CHEMICAL R-113 RECESSED ACCOMMODATES 20 LB DRY CHEMICAL OR 10 LB CO R-114 RECESSED ACCOMMODATES 15 LB CO R-115 SURFACE ACCOMMODATES 20 LB DRY CHEMICAL OR A 10 LB CO R-116 SURFACE ACCOMMODATES 15 LB CO SR-117 SEMI-RECESSED ACCOMMODATES 2 1/2 GAL PRESSURE WATER / COMES WITH BUBBLE CANOPY 14 1/ SR-105 HOSE, AND VALVE CABINETS R-124-SS R-124-R Standard Models Include: Full Glass Front and Grey Enamel Finish Available in grey baked enamel or stainless steel finish Custom Fronts: Full glass door or full metal door Glass not included FM - Full Metal BG - Break Glass Options Cylinder lock available for valve cabinets Break glass door and lock Custom Finishes: SS - Stainless Steel R - Red Enamel W - White Enamel HOSE / VALVE / CABINETS SEMI RECESSED SURFACE DESCRIPTION WIDTH HEIGHT DEPTH TB ADJUSTABLE RECESSED (INCHES) (INCHES) (INCHES) (INCHES) (INCHES) FRONT - R-118 S-119 ACCOMMODATES 1 1/ /2 VALVE PLUS HOSE /2 R-118 ONLY - R-120 S-122 ACCOMMODATES 1 1/2 VALVE PLUS HOSE /2 R-120 ONLY - R-121 S-123 ACCOMMODATES 1 1/2 VALVE, HOSE PLUS /2 R-121 ONLY 5-10 LB DRY CHEMICAL - R-124 S-126 ACCOMMODATES 1 1/2 2 1/2 VALVE, HOSE PLUS /2 R-124 ONLY 5-10 LB DRY CHEMICAL OR WATER PRESSURE - R-125 S-127 ACCOMMODATES 1 1/2 VALVE PLUS 10 LB DRY CHEMICAL /2 R-125 ONLY - R-128 S-130 ACCOMMODATES 1 1/2 VALVE /2 R-128 ONLY - R-129 S-131 ACCOMMODATES 1 1/2 2 1/2 VALVE /2 R-129 ONLY 1 4 F I R E P R O T E C T I O N

14 RACK HOSE APPLICATION Building Protection CONSTRUCTION Single jacket, polyester spun as warp, filament polyester as weft, circular plain weave. Tube: Extruded T.P.U. elastomer - ozone and age resistant. RACK HOSE-FBS is an all polyester single jacket interior protection hose for buildings and plants. The Rack Hose FBS is of light weight and compact, approximately half the weight of standard rubber lined single jacket hose. Resistant to most chemicals, petrol products, ozone & U.V. exposure, hydrolysis, and rot & mildew. Our liner process produces an amazingly thin but smooth inner waterway, yielding an extremely low friction loss for maximum flow. Tough and ready for action but light in weight. Strong, compact and practical, and will fit on most hose storage devices. Rack hose is available folded for standard pin racks in 50' (15m), 75 (22.5m), and 100 (30m) lengths. Specify folded, to number of pins for rack. Standard with brass couplings Couplings according NFPA 1963 for internal and external binding suitable for deliveryand suction hoses. MODEL I.D. LENGTH WORKING PRESSURE BURST PRESSURE (Inch/mm) (Ft) (Bar/Psi) (Bar/Psi) RH-505ELEM 1-1/ /150, 14/200,17/250 31/450,42/600,51/750 RH-755ELEM 1-1/ /150, 14/200,17/250 31/450,42/600,51/750RH- 1005ELEM 1-1/ /150, 14/200,17/250 31/450,42/600,51/750 For Chromed Couplings add CHR after the Model # FM * FACTORY MUTUAL APPROVAL DESIGNED IN ACCORDANCE WITH NFPA AND OSHA STANDARDS SINGLE JACKET ATTACK HOSE APPLICATION Municipal fire brigades, Industrial fire brigades. CONSTRUCTION FM * FACTORY MUTUAL APPROVAL DESIGNED IN ACCORDANCE WITH NFPA AND OSHA STANDARDS SINGLE JACKET polyester industrial fire hose with an ozone-resistant EPDM rubber lining. Spun polyester yarn in the jacket offers superior strength and wear characteristics. Designed for interior or exterior fire protection, Attack Hose-FAS is NFPA compliant as an attack hose. The polyester construction is mildew-and rot-proof. Outstanding abrasion resistance Tough, dependable and lightweight attack hose. A stripe of a contrasting color running the full length of the hose can be woven into the jacket. Meets NFPA recommendations for pump panel identification. Comes standard with Aluminum Couplings Single jacket, the warp yarn shall consist of polyester staple, the filler shall be constructed of high strength, low elongation, filament polyester. The liner shall be a single ply extruded of E.P.D.M. rubber and adhere to the jacket to prevent delamination. Single jacket, the warp yarn shall consist of polyester staple, the filler shall be constructed of high strength, low elongation, filament polyester. The liner shall be a single ply extruded of E.P.D.M. rubber and adhere to the jacket to prevent delamination. MODEL I.D. LENGTH WORKING PRESSURE BURST PRESSURE (Inch/mm) (Ft) (Bar/Psi) (Bar/Psi) SJ / /200, 17/250, 21/300 42/600, 51/750, 63/900 SJ / /200, 17/250, 21/300 42/600, 51/750, 63/900 SJ / /200, 17/250, 21/300 42/600, 51/750, 63/900 SJ / /200, 17/250, 21/300 42/600, 51/750, 63/900 SJ / /200, 17/250, 21/300 42/600, 51/750, 63/900 F I R E P R OT E C T I O N 15

15 DOUBLE JACKET ATTACK HOSE APPLICATION Municipal fire brigades, Industrial fire brigades. The hoses have better abrasion resistance than single jacket hoses and higher service test pressure. FM DOUBLE JACKET hose is constructed of 100% high tensile strength polyester yarns, both warp and filler, and lined with a high-tech EPDM tube. Its engineered design guarantees minimum weight with maximum durability and flexibility. The FAD hose and its assemblies under this specifications shall be constructed with superior quality materials. manufactured in accordance with National Fire Protection Association (NFPA) 1961 standard, latest edition within our ISO-9001:2000 certified quality assurance system. 100% mildew- and rot-proof Outstanding abrasion resistance Tough, dependable and lightweight attack hose A stripe of a contrasting color running the full length of the hose can be woven into the jacket. Meets NFPA recommendations for pump panel identification. Comes standard with aluminum couplings CONSTRUCTION * FACTORY MUTUAL APPROVAL DESIGNED IN ACCORDANCE WITH NFPA AND OSHA STANDARDS Double jacket, the warp yarn shall consist of polyester staple, the filler shall be constructed of high strength, low elongation, filament polyester. The liner shall be a single ply extruded of E.P.D.M. rubber and adhere to the jacket to prevent delamination. Hoses are available with polymer impregnation that provides additional abrasion resistance. MODEL I.D. LENGTH WORKING PRESSURE BURST PRESSURE (Inch/mm) (Ft) (Bar/Psi) (Bar/Psi) DJ / /300, 28/400 63/900, 84/1200 DJ / /300, 28/400 63/900, 84/1200 DJ / /300, 28/400 63/900, 84/1200 DJ / /300, 28/400 63/900, 84/1200 DJ / /300, 28/400 63/900, 84/1200 STANDPIPE ANGLE VALVES CAST BRASS FORGED BRASS CAST BRASS ANGLE HOSE VALVES Underwriters Listed and Factory Mutual approved New York City Board of Standards and Appeals approved For pressures up to 300 lbs. Cast brass with an aluminum wheel FORGED BRASS ANGLE HOSE VALVES Underwriters Listed and Factory Mutual approved For use with a fire hose rack assembly, or as a fire department outlet connection For pressures up to 300 PSI Forged brass with a aluminum, red painted handwheel FM AVF150 AV250 AVF151 CAST BRASS ANGLE HOSE VALVES MODEL DESCRIPTION PACK AV " FEMALE NPT X 1.5" MALE NST (NH) 10 AV " FEMALE NPT X 2.5" MALE NST (NH) 6 AVF " FEMALE NPT X 1.5" FEMALE NPT 10 AVF " FEMALE NPT X 2.5" FEMALE NPT 6 AV150-W 1.5" ALUMINUM REPLACEMENT WHEEL AV250-W 2.5" ALUMINUM REPLACEMENT WHEEL FORGED BRASS ANGLE HOSE VALVES MODEL DESCRIPTION PACK AV " FEMALE NPT X 1.5" MALE NST (NH) 1 AV " FEMALE NPT X 2.5" MALE NST (NH) 1 AVF " FEMALE NPT X 1.5" FEMALE NPT 1 AVF " FEMALE NPT X 2.5" FEMALE NPT 1 AV151-WR RED HAND WHEEL FOR AV151 AV251-WR RED HAND WHEEL FOR AV251 * Polished Chrome also available, add suffix CHR AV F I R E P R O T E C T I O N

16 HOSE ACCESSORIES STYLE V SWING TYPE HOSE STORAGE REELS Style V swing rack allow for drum storage of collapsible hose avoids damaging kinks, for longer hose life. Also pivot mounting permits reel to swing to the proper angle preventing twists and kinks Made of rugged all-steel construction Open sides allow faster hose drying, to prevent mold and mildew HT-100 HRV1 HDR-24 Red polyester powder coat finish Wall mounting is standard Style V5 (when used with 1.5" hose only), has a space between the reel sides to accommodate two widths of hose side by side, for maximum capacity in minimum space HR-100 R/N HDR-18 & HDR-24 SWING TYPE REELS One piece wall bracket (14 gauge), for easier mounting 180 degree swing will also take pipe clamps up to 3" Compact size Smaller reel hub to allow more hose storage Baked red enamel finish Solid steel (14 gauge) support arms Welded construction rim (18 gauge) hub cap, welded spokes form solid wheels, separated by a molded poly hub and bolted together to form a sturdy unit Hose is double rolled from the center of length coupled to valve and nozzle. Hose is ready for action when completely removed and valve is open 21-PIN INTERIOR HOSE RACKS & ACCESSORIES MODEL DESCRIPTION WEIGHT (LBS) PACK 21-PIN 21 PIN STANDARD GALVANIZED STEEL PIN RACK 75 RACK HOSE PIN 24 PIN STANDARD GALVANIZED STEEL PIN RACK 100 RACK HOSE 3 1 W-STOP SAFETY WATER STOP FOR USE WITH STANDARD PIN RACKS 3 1 R/N RACK & NUT NIPPLE FOR AUTOMATIC HOSE RACKS 1 1 HR-100 SEMI-AUTOMATIC ULC HOSE RACK C/W STOP ' RACK HOSE RED 5 1 HR-100-CH SEMI-AUTOMATIC ULC HOSE RACK C/W STOP ' RACK HOSE CHROME 5 1 INTERIOR & EXTERIOR HOSE REELS & ACCESSORIES W-STOP MODEL DESCRIPTION WEIGHT (LBS) PACK HDR-18 SWING TYPE HOSE REEL 18 DIA FOR 75' X 1.5 HOSE 12 1 HDR-24 SWING TYPE HOSE REEL 24 DIA FOR 100' X 1.5 HOSE 16 1 HT-100 HOSE TRAY OF 1.5 DOUBLE OR SINGLE JACKET HOSE 15 X23X4 1 HRV1 1.5 HEAVY DUTY HOSE STORAGE REEL RACK / 75 SINGLE JKT / 50 DBL 1 HRV2 1.5 HEAVY DUTY HOSE STORAGE REEL 150 RACK / 100 SINGLE JKT / 75 DBL 1 HRV HEAVY DUTY HOSE STORAGE REEL 150 RACK / 100 SINGLE JKT / 75 DBL CHR B B C 2500-B HOSE NOZZLES MODEL DESCRIPTION WEIGHT (LBS) PACK LEXAN FOG NOZZLE RED " LEXAN FOG NOZZLE RED ULC / FM B 1.5" BRASS FOG NOZZLE ULC / FM C 1.5" CHROME FOG NOZZLE ULC / FM 6 1 CAPS PLUGS & ADAPTERS MODEL DESCRIPTION WEIGHT (LBS) PACK NHT NPSH POLY THREADED CAP & CHAIN NPSH POLY THREADED CAP & CHAIN CSA POLY THREADED CAP & CHAIN U 2.5 UNIVERSAL NON THREADED CAP & CHAIN B 1.5 BRASS NPSH CAP & CHAIN B 2.5 BRASS CSA CAP & CHAIN C 2.5 CHROMED BRASS CSA CAP & CHAIN CSA 1.5 NPSH POLY FEMALE MALE REDUCER B 2.5 CSA 1.5 NPSH BRASS FEMALE MALE REDUCER PAC ADJUST - A - PLUG PLASTIC 1 1 PBC PLASTIC BREAK CAP C/W 2 J HOOKS 1 1 F I R E P R OT E C T I O N 17

17 CONVENTIONAL PANELS ALARM PRODUCTS Addressable & Conventional Panels Panel Devices Conventional Devices Addressable Devices Notification Devices Pull Stations & Accessories Explosion Proof Devices WE STAND APART. When it comes to fire protection companies, Potter stands apart. Apart from the competition and apart from the constraints of a large corporate mentality. Potter is the only independent manufacturer with a full line of fire alarm systems. With this new line of fire panels and our full complement of modules, detectors, and notification devices, we begin a new era in the Fire Alarm Industry! Fire Alarm Products SPRINKLER PRODUCTS SPRINKLER MONITORING PRODUCTS Water Flow Switches Pressure Switches Tamper & Supervisory Switches Sprinkler Monitoring Panel Valves Visit for further product specifications 1 8 F I R E P R O T E C T I O N

18 GLOBE SPRINKLERS GLOBE SPRINKLER CORPORATION IS A USA-BASED MANUFACTURER OF SPRINKLERS, VALVES, AND ACCESSORIES. In 2014, Globe was proud to celebrate 100 years of continuous production of Globe Sprinklers and Valves. Since the introduction of the first Globe Issue "A" Sprinkler in 1914, the Globe name has persisted in its enduring identity and continued innovation, developing the earliest lever-fulcrum dry pipe valve, Globe Save All center strut sprinklers, and eventually becoming the first US company to utilize 5mm and 3mm Glass Bulbs in its commercial and residential sprinklers. FOR MORE INFO VISIT F I R E P R OT E C T I O N 19

19 ALARMS / SAFETY PRODUCTS SINGLE STATION SMOKE ALARM 0915CA KIDDE SMOKE ALARMS 0914CA SENTRY-TEST-BATTERY CA BASIC-TEST-BATTERY-BOX KCA HUSH, TEST & HUSH - BATTERY CA TAMPER RESISTANT, TEST & HUSH - LITHIUM BATTERY 1 1 PE9KCA PHOTO ELECTRIC, TEST - BATTERY 1 1 P1235CA BASIC-TEST & NEW SMART HUSH - 120V HARDWIRE 1 1 P1275CA HUSH, TEST & SMART HUSH 120V HARDWIRE C/W BU 1 1 P1276CA FRONT LOAD TEST & HUSH HARDWIRE & BATTERY BU 1 1 PE120CA PHOTO ELECTRIC, TEST - HARDWIRE & BATTERY 1 1 HW2D KIDDE CO & EXPLOSIVE GAS ALARMS 9CO5 CO BASIC,TEST & RESET - BATTERY CO BASIC, TEST & RESET - PLUG-IN DIGITAL DISPLAY, TEST & RESET - PLUG-IN BATT B/U CO/EXPLOSIVE GAS TEST & RESET -PLUG-IN BATT B/U 1 1 HWFB KIDDE COMBINATION SMOKE & CO ALARMS COMBO TALKING ALARM TEST & RESET - BATTERY COMBO ALARM TEST & RESET - HARD C/W BATT B/U A ONT-1 ONT-A BLANKETS & LIFE LADDERS FB64PC 6'X4' BLANKET C/W PLASTIC CASE 5 1 HW2D 2 STOREY LIFE LADDER 21 1 HW3D 3 STOREY LIFE LADDER A MAINTENANCE LOG BOOK PROVINCIAL REGULATION FIRST AID KITS ONT-A FIRST AID KIT 1-5 EMPLOYEES 1 1 ONT-1 FIRST AID KIT 5-15 EMPLOYEES 4 1 ONT-2 FIRST AID KIT EMPLOYEES 9 1 *** SPECIFY YOUR PROVINCE AS CONTENTS VARY FROM PROVINCE-PROVINCE STI-1100 STI-1200 STI ALARM PULL STATION COVERS STI-1100 STI ALARM PULL STATION COVER C/W ALARM ULC 3 1 STI-1130 STI ALARM PULL COVER C/W ALARM & SPACER ULC 3 1 STI-1200 STI ALARM PULL STATION COVER NO-ALARM ULC 3 1 STI-1230 STI ALARM PULL COVER NO-ALARM & SPACER ULC 3 1 STI-3100 STI ALARM PULL STATION COVER SPACER ONLY 2 1 SSFSPB-1 FSPB-2 SAFETY PLAN BOXES FSPB-1 SAFETY PLAN BOX - CITY OF TORONTO -13X13X FSPB-2 SAFETY PLAN BOX - PEEL REGION -13X13X SSFSPB-1 SAFETY PLAN BOX -CITY OF TORONTO STAINLESS 10 1 SSFSPB-2 SAFETY PLAN BOX -REGION OF PEEL STAINLESS F I R E P R O T E C T I O N

20 EMERGENCY & EXIT LIGHTING LMCE-LED Now with two-wire universal AC input Based on a modular design concept, this exit sign comes preassembled for quick, easy installation Metal construction using canadian cold-rolled steel CSA certified, meets or exceeds C860 requirements RM-8LMCE-2MT 8LMCE-2MT Product! 8LMCE SERIES ALL-METAL COMBINATION SIGN RM-LMCE Combination Exit Sign and Power Pack Now with dual input voltages 120/347Vac Based on a modular design concept, this combo unit comes preassembled for quick, easy installation CSA certified, meets or exceeds C860 requirements 12EDW360C2-9WT (RGS) 12COM160C2-9WT (RGC) 6COM36C2-9WT (RGC) NEW! LSC RUNNING MAN (RM) UNIVERSAL PICTOGRAM Universal mounting: end, wall or ceiling Listed CSA 22.2 No Legend illuminated by long-life white LED s 5W LED emergency lights provide 70 feet of egress illumination on a 6-foot wide path Sealed, maintenance-free, 6V or 12V Lead-Calcium battery Remote load capacity: 80W up to 560 feet of egress illumination when using LED remote heads RGC SERIES STEEL, COMPACT, 6 AND 12 VOLTS Compact, steel cabinet with corrosion-resistant undercoating Quick and easy installation pre-assembled cordset, no batteries or board to remove before installation Universal Spider knockout pattern for junction box mounting CSA C22.2 No. 141 certified RGS SERIES 6, 12 AND 24 VOLTS Rugged, steel cabinet with corrosion-resistant undercoating standard colour is factory white with polar white and black available as options Removable front panel on cabinet provides easy access and allows unit to be mounted at ceiling height Solid-state, pulse-type charger current-limited, temperaturecompensated, short-circuit proof and reverse-polarity protected CSA C22.2 No. 141 certified LMCE - EXIT LIGHTING UNITS MODEL PRODUCT DESCRIPTION PACK LMCE UNIVERSAL STEEL LED EXIT SIGN, 120/347VAC, 6-24VDC 1 LMCE-SP UNIVERSAL STEEL LED EXIT SIGN, SELF-POWERED 1 RM-LMCE UNIVERSAL STEEL LED EXIT SIGN, 120/347VAC, 6-24VDC RUNNING MAN 1 RM-LMCE-SP UNIVERSAL STEEL LED EXIT SIGN, SELF-POWERED RUNNING MAN 1 LMCE-SC860 UNIVERSAL STEEL LED SORTIE SIGN, SELF-POWERED 1 LMCE-SP-SC860 UNIVERSAL STEEL LED SORTIE SIGN, SELF-POWERED 1 THERMOPLASTIC LED SERIES PLEDU UNIVERSAL PLASTIC LED EXIT SIGN, 120/347VAC 1 PLEDU-SP UNIVERSAL PLASTIC LED EXIT SIGN, 120/347VAC, SELF-POWERED 1 LMCE - COMBINATION EMERGENCY / EXIT LIGHTING UNITS LED & CSA APPROVED MODEL PRODUCT DESCRIPTION PACK LMCE SERIES COMBINATION METAL EXIT/PACK 8LMCE-2MT COMBINATION STEEL LED EXIT/PACK, 6V, 36W 120/347VAC 1 RM-8LMCE-2MT COMBINATION STEEL LED EXIT/PACK, 6V, 36W 120/347VAC 1 LMCE36C2-9WT-SC860 COMBINATION STEEL LED SORTIE/PACK, 6V, 36W 120/347VAC 1 DECEPC SERIES COMBINATION THERMOPLASTIC EXIT/PACK DECEPU COMBINATION PASTIC LED EXIT/PACK 120/347VAC 1 RGS/RGC EMERGENCY LIGHTING UNITS LED & CSA APPROVED MODEL PRODUCT DESCRIPTION PACK RGC SERIES 6RGC18C2-9WT 6 VOLT, 18 WATT C/W LINE CORD. 120/347VAC OPERATION 1 6RGC36 6 VOLT, 36 WATT C/W LINE CORD. 120/347VAC OPERATION 1 6RGC50C2-9WT 6 VOLT, 50 WATT C/W LINE CORD. 120/347VAC OPERATION 1 6RGC72C2-9WT 6 VOLT, 72 WATT C/W LINE CORD. 120/347VAC OPERATION 1 6RGC100C2-9WT 6 VOLT, 100 WATT C/W LINE CORD. 120/347VAC OPERATION 1 6RGC160C2-9WT 6 VOLT, 160 WATT C/W LINE CORD. 120/347VAC OPERATION 1 12RGC36C2-9WT 12 VOLT, 36 WATT C/W LINE CORD. 120/347VAC OPERATION 1 12RGC72C2-9WT 12VOLT, 72 WATT C/W LINE CORD. 120/347VAC OPERATION 1 12RGC100C2-9WT 12 VOLT, 100 WATT C/W LINE CORD. 120/347VAC OPERATION 1 12RGC160C2-9WT 12 VOLT, 160 WATT C/W LINE CORD. 120/347VAC OPERATION 1 RGS SERIES 6RGS180C2-9WT 6 VOLT, 180 WATT C/W LINE CORD. 120/347VAC OPERATION 1 12RGS200C2-9WT 12 VOLT, 200 WATT C/W LINE CORD. 120/347VAC OPERATION 1 12RGS250C2-9WT 12 VOLT, 250 WATT C/W LINE CORD. 120/347VAC OPERATION 1 12RGS360C2-9WT 12 VOLT, 360 WATT C/W LINE CORD. 120/347VAC OPERATION 1 DECORATIVE UNITS DEC STAND-ALONE DECORATOR PACK. 120/347VAC 1 EMERGENCY LIGHTING UNIT OPTIONS NO HEADS - UNITS 100W AND OVER ONLY ONE HEAD - UNITS 100W AND OVER ONLY F I R E P R OT E C T I O N 21

21 MT / MQ / MQM SERIES REMOTE HEADS MH1-6V9WT Compact design 6, 12 and 24 volts with various wattages Variable light patterns using adjustable lens Fire-retardant thermoplastic Available with tungsten, quartz lamps or MR16 300º rotation CSA certified to C22.2 Nº50. LMW-SUPER STRIP LMW LED RETROFIT PRODUCTS MH2-6V9WT Convert high consumption incandescent and fluorescent lamps to energy efficient LED lamps. Converting existing exit signage from incandescent or fluorescent lamps to LED (light emitting diodes) lamps drastically reduces operating and maintenance costs for building owners and property managers. As part of energy efficiency programs, some Canadian electric utilities are also actively promoting conversion to LED with incentive and rebate programs for installers and building owners/managers. Lumacell offers four retrofit kit options; all based on the long-life AllnGaP LED technology: Superstrip Series Mini-Wedge LMW Model Mini-Wedge LMWXD Model LED Lamp Exceptional energy efficiency reduces energy consumption by up to 90% Extremely long life 10 to 25 years Important reduction in maintenance and energy costs Average payback is less than two years Retrofit kits are easy to install Improved visibility and reliability: AllnGap LED Technology L11W - LED BULBS ALARM & EMERGENCY LIGHTING SEALED LEAD ACID BATTERIES 6CE5 6 VOLT 5 AMP HOUR BATTERY SEALED LEAD 18 6CE7 6 VOLT 7 AMP HOUR BATTERY SEALED LEAD 10 6CE12 6 VOLT 12 AMP HOUR BATTERY SEALED LEAD 10 12CE5 12 VOLT 5 AMP HOUR BATTERY SEALED LEAD 10 12CE VOLT 7.5 AMP HOUR BATTERY SEALED LEAD 8 12CE12 12 VOLT 12 AMP HOUR BATTERY SEALED LEAD 4 12CE18 12 VOLT 18 AMP HOUR BATTERY SEALED LEAD 2 12CE26 12 VOLT 26 AMP HOUR BATTERY SEALED LEAD 1 12CE33 12 VOLT 33 AMP HOUR BATTERY SEALED LEAD 1 REPLACEMENT BULBS & LED RETROFIT KITS PORTALAC BATTERIES REPLACEMENT HEADS & LAMPS MODEL PRODUCT DESCRIPTION PACK MH SERIES MINI-HEADS (PAR18) MH1-6V9WT SINGLE HEAD 6V, 9 WATT TUNGSTEN MH1-12V9WT SINGLE HEAD 12V, 9 WATT TUNGSTEN MH2-6V9WT DOUBLE HEAD 6V, 9 WATT TUNGSTEN MH2-12V9WT DOUBLE HEAD 12V, 9 WATT TUNGSTEN SR SERIES STANDARD HEADS (PAR 36) SR1-6V9WT SINGLE HEAD 6V, 9 WATT TUNGSTEN SR1-12V9WT SINGLE HEAD 12V, 9 WATT TUNGSTEN SR2-6V9WT DOUBLE HEAD 6V, 9 WATT TUNGSTEN SR2-12V9WT DOUBLE HEAD 12V, 9 WATT TUNGSTEN LAMP OPTIONS (PACKS AND REMOTES) 8WQ 8W HALOGEN LAMP (PRICE PER LAMP) 12WQ 12W HALOGEN LAMP (PRICE PER LAMP) 20WQ (SR ONLY) 20W HALOGEN LAMP (PRICE PER LAMP) 15T6 LIGHT BULB FOR EXIT LIGHTS 15 WATT CANDELABRA BASE MINIATURE BULB 6V 6.63 W DBL CONTACT BAYONET MINIATURE BULB 6V 3.7W MINIATURE BULB 914 6V 4W 10 LED LAMP OPTIONS L11W LED LAMP REDUCES ENERGY CONSUMPTION UP TO 96% CAND BSE 2 L11I LED LAMP REDUCES ENERGY CONSUMPTION UP TO 96% INTER BSE 2 L11WB LED LAMP REDUCES ENERGY CONSUMPTION UP TO 96% BAYO BSE 2 LMW-120-C LUMACELL LED RETROFIT MINI-STRIP C/W 15 YEAR WARRANTY F I R E P R O T E C T I O N

22 INCONTROL AUTOMATIC CLEAN AGENT S 24/7 unattended fire protection ULC listed Accepted by the Canadian Coast Guard Approved for use in occupied areas Suitable for Class A, B, & C hazards Simple installation and maintenance No residue safe for sensitive equipment Self-contained no external power necessary Optional manual operation AUTOMATIC PROTECTION FOR EVERYDAY APPLICATIONS... Where fast burning, high heat-producing materials are stored or used Where electricity is inaccessible or unreliable Where other systems would be too costly Where a first line of defence is needed to prevent damage from a sprinkler system. A B C WOOD TRASH PAPER LIQUIDS GREASE ELECTRICAL EQUIP. B LIQUIDS GREASE C ELECTRICAL EQUIP. MAXIMUM VOLUME PROTECTED AT 70 F (21 C) MODEL KGS / LBS CLASS A HAZARDS CLASS B HAZARDS ft 3 m 3 ft 3 m 3 NAE-1 1 / NAE-2 2 / NAE-4 4 / NAE-9 9 / NAE / , NAE / , , For illustrative purposes only. Consult the product literature for detailed application information. R-102 RESTAURANT SUPPRESSION SYSTEM Low ph agent Proven design Ease of recharge and post-fire cleanup Non-corrosive Reliable gas cartridge operation Aesthetically appealing UL Listed Meets requirements of UL 300 ULC Listed Meets requirements of ULC/ORD-C LPS1223 ABS and CE approved and listed Certificate Of Approval New York City Five-year limited warranty ANSUL products protect more food service kitchens from fire than any other brand. The R-102 Fire Suppression System incorporates a flexible design with an extremely effective ANSULEX Low ph Liquid Agent. ANSULEX quickly knocks down flames and cools hot surfaces, while generating a tough vapor securing blanket that helps prevent re-flash. The R-102 system is designed to protect areas associated with ventilating equipment, including hoods, ducts, plenums, and filters. It also protects auxiliary grease extraction equipment and cooking equipment such as various types of fryers, griddles, range tops, broilers, char-broilers and woks. The system is ideally suited for commercial kitchens in fast food chains, retail food courts, diners, convenience stores, catering facilities, mobile food trucks, hotels and casinos, stadiums, schools, hospitals and more. The R-102 system is cooking equipment friendly and offered in two designs: Appliance-Specific and Overlapping. The appliance-specific design aims the nozzles at the specific hazard areas of each appliance. With the overlapping design, the nozzles are arranged to overlap and provide a fire-free zone throughout a group of appliances Contact Customer Service for Further Specifications sales@herbertwilliams.com F I R E P R OT E C T I O N 23

23 WET CHEMICAL KITCHEN SUPPRESSION SYSTEMS UL and ULC Approved Complies with NFPA Standard 17A and 96 Meets the requirements of the Building Officials and Code Administrators (BOCA) Meets the requirements of the International Building Code (IBC) Approved by the City of New York Material and Equipment Acceptance Division (MEA) CE Marked RL-300 The KITCHEN KNIGHT II Restaurant Kitchen Fire Suppression System is a pre-engineered solution to appliance and ventilating hood and duct grease fires. The system is designed to maximize hazard protection, reliability, and installation efficiency. Automatic or manual system activation releases a throttle discharge of potassium carbonate solution on the protected area in the form of fine droplets to suppress the fire and help prevent re-ignition after the discharge is complete. EN-MCU NOZZLES GV-150 PCL-600 RL-160 PCL-300 MCH-CTRL SPECIFICATIONS KITCHEN NIGHT II INDUSTRIAL DRY CHEMICAL SUPPRESSION SYSTEMS MODEL PRODUCT CATEGORY WEIGHT PC PCI-17ABC CYLINDER WITH VALVE, ABC AGENT, 17 LB. 41 PC PCI-35ABC CYLINDER WITH VALVE, ABC AGENT, 35 LB PC PCI-70ABC CYLINDER WITH VALVE, ABC AGENT, 70 LB. 125 PC PCI-25SBC CYLINDER WITH VALVE, BC AGENT, 25 LB PC PCI-25SABC CYLINDER WITH VALVE, ABC AGENT, 25 LB PC PCI-50SBC CYLINDER WITH VALVE, BC AGENT, 50 LB PC PCI-50SABC CYLINDER WITH VALVE, ABC AGENT, 50 LB PC MB-1 CYLINDER MOUNTING BRACKET 5 PC MB-15 CYLINDER MOUNTING BRACKET 3.69 PC MB-U8 FLOOR MOUNTING BRACKET, 8 DIAMETER CYLINDERS 1.18 PC MB-U10 FLOOR MOUNTING BRACKET, 10 DIAMETER CYLINDERS 1.36 PC MB-U12 FLOOR MOUNTING BRACKET, 12 DIAMETER CYLINDERS 1.78 PC NMCH CONTROL HEAD, MECHANICAL, NO LOCAL ACTUATION 6 PC NMCH COVER ASSEMBLY REPLACEMENT 0.4 PC NMCH-DPT CONTROL HEAD W/SWITCH, MECHANICAL, NO LOCAL ACTUATION 6.14 PC MCH CONTROL HEAD, MECHANICAL, WITH LOCAL ACTUATION 6.14 PC ECH-24 CONTROL HEAD, ELECTRICAL, 24VDC, WITH LOCAL ACTUATION 6.97 PC ECH-120 CONTROL HEAD, ELECTRICAL, 120VAC, WITH LOCAL ACTUATION 6.97 PC NECH-24V CONTROL HEAD, ELECTRICAL, 24VDC, NO LOCAL ACTUATION 6.14 KITCHEN NIGHT II INDUSTRIAL DRY CHEMICAL SUPPRESSION SYSTEMS MODEL PRODUCT CATEGORY WEIGHT PC NECH-120V CONTROL HEAD, ELECTRICAL, 120VAC, NO LOCAL ACTUATION 6.14 PC ECH/SM-120 ECH-120 CONTROL HEAD AND SM SYSTEM CIRCUIT MONITOR 8.5 PC MB-P2 MOUNTING BRACKET, CONTROL HEAD 1.2 PC SM-24 SYSTEM CIRCUIT MONITOR, 24VDC 0.95 PC SM-120 SYSTEM CIRCUIT MONITOR, 120VAC 1.16 PC NV-WA NOZZLE WITH CAP, WORK AREA, VEHICLE PAINT BOOTH 0.12 PC NV-SW NOZZLE WITH CAP, WORK AREA, VEHICLE PAINT BOOTH 0.1 PC NV-P1 NOZZLE WITH CAP, OVERHEAD PLENUM AREA, VEHICLE PAINT BOOTH 0.12 PC NV-DP2 NOZZLE WITH CAP, EXHAUST DUCT/END PLENUM AREA, VEHICLE PAINT BOOTH 0.12 PC NV-UF NOZZLE WITH CAP, UNDER FLOOR PLENUM AREA, VEHICLE PAINT BOOTH 0.2 PC N-SCR NOZZLE WITH CAP, SCREENING, OPEN FACE PAINT BOOTH 0.12 PC N-OTF NOZZLE WITH CAP, WORK AREA FLOODING, OPEN FACE PAINT BOOTH 0.12 PC N-PLU NOZZLE WITH CAP, PLENUM, OPEN FACE PAINT BOOTH 0.12 PC N-DCT NOZZLE WITH CAP, EXHAUST DUCT, OPEN FACE AND VEHICLE PAINT BOOTH 0.12 PC NF-ABC NOZZLE WITH CAP, TOTAL FLOODING 0.12 PC N-LA-ABC NOZZLE WITH CAP, ABC LOCAL APPLICATION, OVERHEAD 0.51 PC N-LA-BC NOZZLE WITH CAP, BC LOCAL APPLICATION, OVERHEAD 0.51 PC N-TS NOZZLE WITH CAP, LOCAL APPLICATION, TANKSIDE 0.12 PC RPS-M REMOTE PULL STATION, MECHANICAL 1.08 INDUSTRIAL DRY CHEMICAL SUPPRESSION SYSTEMS PCI-70 Paint spray booths/rooms are areas designed to confine or limit the escape of spray, vapor, and residue. A power ventilation system dedicated to these areas ensures the appropriate exhaust of residual material. Pyro-Chem's dry chemical extinguishing agents are appropriate for Class A, B, or C fires. A careful hazard survey should be conducted to properly define the type of fire to be extinguished. In addition to flammable/combustible liquids, the material composition of the object to be painted must be considered as well as resident material in the protected area. Total flooding and screening application techniques as defined by NFPA 17 are utilized by Pyro-Chem's Monarch fire suppression systems to protect the entire hazard which includes the work area, exhaust plenum area, exhaust ducts, and the screening of the opening. MCH-CTRL NOZZLES 2 4 F I R E P R O T E C T I O N

24 NOVEC 1230 CLEAN AGENT PROTECTION SYSTEMS APPLICATION Computer and electrical rooms / Data Centres Dry cleaning plants Bank vaults and depositories Museums and archives Transformer vaults Chemical and flammables storage Engine compartments Spray booths Research laboratories Records storage Novec fluid is a clear, colorless and low odor liquid perfectly suited to protect high value assets in areas that may be normally occupied, in locations where clean-up of other agents is problematic, when storage space for a fire suppression agent is restricted, or when an electrically non-conductive agent is required. Each system consists of the following components and their associated accessories: AGENT STORAGE COMPONENTS Storage components consist of the cylinder assembly(s), which contains the Novec 1230 fluid, and the cylinder bracket(s), which holds the cylinder assembly securely in place. AGENT FLUID DISTRIBUTION COMPONENTS Distribution components consist of the discharge nozzles used to introduce the Novec 1230 fluid into a protected hazard along with the associated piping system used to connect the nozzles to the cylinder assembly. A BRIEF OVERVIEW OF SV, MV AND LV SYSTEMS The SV (small volume), MV (medium volume) and LV (large volume) series' of Novec-1230 fire suppression systems refer to the volume contained, and some variations in the components included, valve widths and the number of cylinders involved. Choosing the right series for the area you need to protect is important for effective fire suppression. The SV series supports 3 cylinders with sizes ranging from lb, with a 1 1/4 inch discharge outlet and a 3/8 inch pilot actuation part. Like the MV series, the SV series has a rupture disc that bursts between 850 psi (58.6 bar) and 1000 psi (68.9 bar). TRIM COMPONENTS Trim components complete the installation of the suppression system and consist of connection fittings, pressure gauge, low-pressure supervisory switch, electric valve actuator, and manual valve actuator. SLAVE ARRANGEMENT COMPONENTS Slave arrangement components consist of the pneumatic valve actuator(s), actuation check valve, vent check, actuation hose, and fittings required for a multiple cylinder (slave) arrangement. SUPPLEMENTAL COMPONENTS Supplemental components include the discharge pressure switch and manifold check valve. They supplement the core equipment or complete a specific multicylinder configuration. The MV series supports 2 large cylinders with a normal cylinder size of lb, with a 2 inch discharge outlet and a 1/4 inch pilot actuation part. The MV series' rupture disc bursts at 850 psi (58.6 bar) and 1000 psi (68.9 bar), just like the SU series. The LV series supports 3 large cylinders weighing lb, each with a 3 inch discharge outlet and a 1/4 inch pilot actuation part. The LV series' rupture disc is mounted right on the cylinder, not the valve. CONTROL PANEL This device monitors the condition of the electric actuator, detectors, warning devices, cylinder pressure, and any manual release and abort stations. All electric or electronic devices must connect to the control panel in order to function. DETECTION AND ALARM DEVICES Detection devices coupled with manual release and abort stations maximize system efficiency while audible and visual alarm devices alert staff of alarm conditions. Contact Customer Service For a Consultation & Engineering Estimate sales@herbertwilliams.com F I R E P R OT E C T I O N 25

25 HIGH PRESSURE CO2 PROTECTION SYSTEMS INNOVATIVE HIGH-PERFORMANCE CYLINDER VALVES Patented cost-saving unibody design does not have separate valve and discharge heads. Engineered for reliability no top or bottom cap joints to leak. Simple to set up slave valve operates from manifold back pressure no need for a separate pressurizing line. High performance operation clear unimpeded right-angled flow path. Easy to maintain removable valve seat for quick replacement. Ingenious force differential valve uses cylinder pressure to hold the valve closed. Machined brass construction for added reliability no drop-forged parts. APPLICATION Typical hazards protected by carbon dioxide systems are: Flammable Liquid Storage, Chemical Laboratories, Transformer Vaults, Oil Circuit Breakers, Engine Enclosures Pump Rooms, Hydraulic Oil Cellars, Gas Turbines, Equipment Enclosures, Storage Vaults Every enterprise has equipment and facilities that are vital to its operation. Business would be seriously affected if these were destroyed by fire. In many cases valuable assets should not be protected by water or other similar extinguishing agents, as these types of agents often are unable to reach inaccessible parts of the hazard. They can also cause considerable damage even in excess of that done by the fire itself. Carbon dioxide is a reliable, versatile and efficient fire fighting agent. It has provided decades of successful operation. It is a dry, inert, non-corrosive gas that will not damage equipment or materials or contaminate liquids or food. It does not leave any residue to clean-up, and as a result, business down-time is held to a minimum. In addition, carbon dioxide is a non-conductor of electricity, and can even be used without danger in spaces housing high voltage electrical equipment. Choose a High Pressure CO2 Fire Protection Solution. ADVANTAGES OF HIGH PRESSURE CO2 Carbon dioxide is a standard commercial product that is commonly used for carbonated beverages, for fast freezing food, for medical purposes, for purging pipes and tanks, as well as for extinguishing fires. It is readily available in most cities and seaports throughout the world. For more than 80 years carbon dioxide has been used for fire protection purposes. The NFPA standard for fire extinguishing systems was initiated in 1928, was first adopted in It has been revised approximately 26 times since, and represents the accumulated knowledge and experience of those who have designed and used CO2 systems for fire extinguishing purposes. Contact Customer Service For a Consultation & Engineering Estimate sales@herbertwilliams.com 2 6 F I R E P R O T E C T I O N