SVENSK STANDARD SS-EN :2016

Size: px

Start display at page:

Download "SVENSK STANDARD SS-EN :2016"

Shona Tabitha Harper
6 years ago
Views:

1 SVENSK STANDARD SS-EN :2016 Fastställd/Approved: Publicerad/Published: Utgåva/Edition: 2 Språk/Language: engelska/english ICS: ; ; ; Fästelement Fästelement för icke förspända förband i stålkonstruktioner Del 1: Allmänna krav Non-preloaded structural bolting assemblies Part 1: General requirements

2 Standarder får världen att fungera SIS (Swedish Standards Institute) är en fristående ideell förening med medlemmar från både privat och offentlig sektor. Vi är en del av det europeiska och globala nätverk som utarbetar internationella standarder. Standarder är dokumenterad kunskap utvecklad av framstående aktörer inom industri, näringsliv och samhälle och befrämjar handel över gränser, bidrar till att processer och produkter blir säkrare samt effektiviserar din verksamhet. Delta och påverka Som medlem i SIS har du möjlighet att påverka framtida standarder inom ditt område på nationell, europeisk och global nivå. Du får samtidigt tillgång till tidig information om utvecklingen inom din bransch. Ta del av det färdiga arbetet Vi erbjuder våra kunder allt som rör standarder och deras tillämpning. Hos oss kan du köpa alla publikationer du behöver allt från enskilda standarder, tekniska rapporter och standardpaket till handböcker och onlinetjänster. Genom vår webbtjänst e-nav får du tillgång till ett lättnavigerat bibliotek där alla standarder som är aktuella för ditt företag finns tillgängliga. Standarder och handböcker är källor till kunskap. Vi säljer dem. Utveckla din kompetens och lyckas bättre i ditt arbete Hos SIS kan du gå öppna eller företagsinterna utbildningar kring innehåll och tillämpning av standarder. Genom vår närhet till den internationella utvecklingen och ISO får du rätt kunskap i rätt tid, direkt från källan. Med vår kunskap om standarders möjligheter hjälper vi våra kunder att skapa verklig nytta och lönsamhet i sina verksamheter. Vill du veta mer om SIS eller hur standarder kan effektivisera din verksamhet är du välkommen in på eller ta kontakt med oss på tel Standards make the world go round SIS (Swedish Standards Institute) is an independent non-profit organisation with members from both the private and public sectors. We are part of the European and global network that draws up international standards. Standards consist of documented knowledge developed by prominent actors within the industry, business world and society. They promote cross-border trade, they help to make processes and products safer and they streamline your organisation. Take part and have influence As a member of SIS you will have the possibility to participate in standardization activities on national, European and global level. The membership in SIS will give you the opportunity to influence future standards and gain access to early stage information about developments within your field. Get to know the finished work We offer our customers everything in connection with standards and their application. You can purchase all the publications you need from us - everything from individual standards, technical reports and standard packages through to manuals and online services. Our web service e-nav gives you access to an easy-to-navigate library where all standards that are relevant to your company are available. Standards and manuals are sources of knowledge. We sell them. Increase understanding and improve perception With SIS you can undergo either shared or in-house training in the content and application of standards. Thanks to our proximity to international development and ISO you receive the right knowledge at the right time, direct from the source. With our knowledge about the potential of standards, we assist our customers in creating tangible benefit and profitability in their organisations. If you want to know more about SIS, or how standards can streamline your organisation, please visit or contact us on phone +46 (0)

3 Europastandarden EN :2016 gäller som svensk standard. Detta dokument innehåller den officiella engelska versionen av EN :2016. Denna standard ersätter SS-EN :2007, utgåva 1. The European Standard EN :2016 has the status of a Swedish Standard. This document contains the official English version of EN :2016. This standard supersedes the Swedish Standard SS-EN :2007, edition 1. Copyright / Upphovsrätten till denna produkt tillhör SIS, Swedish Standards Institute, Stockholm, Sverige. Användningen av denna produkt regleras av slutanvändarlicensen som återfinns i denna produkt, se standardens sista sidor. Copyright SIS, Swedish Standards Institute, Stockholm, Sweden. All rights reserved. The use of this product is governed by the end-user licence for this product. You will find the licence in the end of this document. Upplysningar om sakinnehållet i standarden lämnas av SIS, Swedish Standards Institute, telefon Standarder kan beställas hos SIS Förlag AB som även lämnar allmänna upplysningar om svensk och utländsk standard. Information about the content of the standard is available from the Swedish Standards Institute (SIS), telephone Standards may be ordered from SIS Förlag AB, who can also provide general information about Swedish and foreign standards. Denna standard är framtagen av kommittén för Fästelement, SIS / TK 103. Har du synpunkter på innehållet i den här standarden, vill du delta i ett kommande revideringsarbete eller vara med och ta fram andra standarder inom området? Gå in på - där hittar du mer information.

5 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM Provläsningsexemplar / Preview EN July 2016 ICS Supersedes EN :2007 English Version Non-preloaded structural bolting assemblies - Part 1: General requirements Boulonnerie de construction métallique non précontrainte - Partie 1: Exigences générales Garnituren für nicht vorgespannte Schraubverbindungen im Metallbau - Teil 1: Allgemeine Anforderungen This European Standard was approved by CEN on 19 March CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN :2016 E

6 SS-EN :2016 (E) Provläsningsexemplar / Preview Contents Page European foreword... 3 Introduction Scope Normative references Terms and definitions Product characteristics General Type (bolting assemblies) Property class (bolting assemblies) Product grade (bolts and nuts) Testing and assessment methods General Type (bolting assemblies) - Axial load (bolting assemblies) Property class (bolting assemblies) Product grade (bolts and nuts) Assessment and Verification of Constancy of Performance (AVCP) General Type-testing Factory production control (FPC) Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation ZA.1 Scope and relevant characteristics ZA.2 Procedure for Assessment and Verification of Constancy of Performance (AVCP) of Non-preloaded structural bolting assemblies ZA.3 CE marking and labelling Bibliography

7 SS-EN :2016 (E) European foreword This document (EN :2016) has been prepared by Technical Committee CEN/TC 185 "Fasteners", the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2017, and conflicting national standards shall be withdrawn at the latest by April Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN :2007. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports basic work requirements of Regulation (EU) No 305/2011. For relationship with Regulation (EU) No 305/2011 see informative Annex ZA, which is an integral part of this document. EN consists of the following parts, under the general title Non-preloaded structural bolting assemblies: Part 1: General requirements; Part 2: Fitness for purpose. Compared to the previous version, the modifications are the following: the standard was revised to meet the new format for harmonized standards and in relation to the Regulation (EU) No. 305/2011 (CPR); the requirements of this standard only relate to the product characteristics of bolting assemblies which are necessary for CE marking; all clauses dealing with further technical or other requirements have been transferred to EN ; washers are not considered as part of the non-preloaded bolting assemblies, however they can be used as relevant; addition of bolting assemblies made in aluminum and aluminum alloys; addition of nominal diameters M5 to M10; Railway rail fasteners have been excluded. 3

8 SS-EN :2016 (E) Provläsningsexemplar / Preview According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. 4

9 SS-EN :2016 (E) Introduction Rules for design and execution of bolted connections with non-preloaded structural bolts are defined for instance in EN and EN for steel structures or EN and EN for aluminium or aluminium alloy structures. The parts of this European Standard on structural bolting assemblies specify the general requirements which ensure that bolting assemblies comprising bolts and nuts are suitable for use as non-preloaded structural bolting in structural metallic works. They can be used in shear connections and/or in tension connections if no preload is required. Structural bolting assemblies which meet the requirements of this part of this European Standard have been designed to allow tensile resistance of at least f ub A s. For this purpose the tensile test of bolting assemblies specified in EN is a mean to check whether the function of the assembly is fulfilled. Washers or other elements can be used additionally if necessary. 5

10 SS-EN :2016 (E) Provläsningsexemplar / Preview 1 Scope This part of this European Standard specifies the general requirements for bolting assemblies for nonpreloaded structural bolting. Bolting assemblies in accordance with this European Standard are designed to be used in structural bolting connections for shear and/or tensile loading. The intended use of bolting assemblies in accordance with this European standard is structural metallic works. It applies to bolts (the term used when bolts partially threaded, screws, studs and stud-bolts are considered all together) and nuts made of carbon steel, alloy steel, stainless steel or aluminium or aluminium alloy with the following property classes: bolts made of carbon steel or alloy steel: 4.6, 4.8, 5.6, 5.8, 6.8, 8.8, 10.9 (in accordance with EN ISO 898-1); nuts made of carbon steel or alloy steel: 5, 6, 8, 10, 12 (in accordance with EN ISO 898-2); bolts made of austenitic stainless steel: 50, 70, 80 (in accordance with EN ISO ); nuts made of austenitic stainless steel: 50, 70, 80 (in accordance with EN ISO ); bolts made of aluminium or aluminium alloy: AL1 to AL6 (in accordance with EN 28839); nuts made of aluminium or aluminium alloy: AL1 to AL6 (in accordance with EN 28839). This European Standard applies to bolting assemblies with ISO metric coarse pitch thread from sizes M12 to M39 for use in steel structures according to EN , and from M5 to M39 for use in aluminium or aluminium alloy structures according to EN The use of thread sizes larger than M39 is not precluded provided all applicable requirements of this standard are met. WARNING Only bolting assemblies are covered by this harmonized standard: separate bolts or nuts, not tested as part of an assembly lot of bolting assemblies in accordance with EN , are not covered by this harmonized standard and cannot be CE marked. NOTE 1 The property classes 4.8, 5.8 and 6.8 may be subjected to limitations of use. NOTE 2 High-strength structural bolting assemblies for preloading which meet the requirements of EN are not within the scope of this European Standard but they are also suitable for use in non-preloaded structural bolting. NOTE 3 Bolts and nuts made of aluminium or aluminium alloys are not designed to be used in steel structures, see EN Bolting assemblies in accordance with this European Standard are not designed to be welded. Railway rail fasteners are not covered by this European Standard. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN , Execution of steel structures and aluminium structures Part 2: Technical requirements for steel structures 6

11 SS-EN :2016 (E) EN , Non-preloaded structural bolting assemblies Part 2: Suitability test EN 28839, Mechanical properties of fasteners Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839) EN ISO 225, Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions (ISO 225) EN ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs with specified property classes Coarse thread and fine pitch thread (ISO 898-1) EN ISO 898-2, Mechanical properties of fasteners made of carbon steel and alloy steel Part 2: Nuts with specified property classes Coarse thread and fine pitch thread (ISO 898-2) EN ISO , Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs (ISO ) EN ISO , Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts (ISO ) EN ISO , Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, B and C (ISO ) EN ISO 10684:2004, Fasteners Hot dip galvanized coatings (ISO 10684:2004) ISO 965-1, ISO general purpose metric screw threads Tolerances Part 1: Principles and basic data ISO 965-2, ISO general purpose metric screw threads Tolerances Part 2: Limits of sizes for general purpose external and internal screw threads Medium quality ISO 965-3, ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads ISO 965-4, ISO general purpose metric screw threads Tolerances Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing ISO 965-5, ISO general purpose metric screw threads Tolerances Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN and the following apply. 3.1 bolting assembly matching bolts (including screws, studs and stud bolts) and nuts 3.2 manufacturing lot quantity of components of a single designation including product grade, property class, type, and size, manufactured from bar, wire, rod or flat product from a single cast, processed through the same or 7

SVENSK STANDARD SS-EN ISO :2006/A1:2014

SVENSK STANDARD SS-EN ISO :2006/A1:2014 SVENSK STANDARD SS-EN ISO 11979-10:2006/A1:2014 Fastställd/Approved: 2014-08-10 Publicerad/Published: 2014-10-01 Utgåva/Edition: 1 Språk/Language: engelska/english ICS: 11.040.70 Ögonimplantat Intraokulära