SHIMADEN DIGITAL INDICATORS

Transcription

1 Shimaden, Temperature and Humidity Control Specialists C %RH MICROPROCESSOR-BASED SHIMADEN DIGITAL INDICATORS & NRTL /C approved BASIC FEATURES DIN Size 48 x 96 mm ±.25% High Accuracy Indication User-Selectable Inputs (Thermocouples) User-Selectable Ranges Programmable Scaling (DC mv, DC ma) Power Supply (1~24V AC or 24V AC or 24V DC) Versatile Alarm Configurations Sensor Power Supply Available Interface RS-485, RS-422A or RS-232C Analog Output Scaling Available

2 NAME & FUNCTI Hold (HOLD) lamp Min (MIN) value lamp Max (MAX) value lamp Communication () lamp Alarm 1 (AL1) lamp Alarm 2 (AL2) lamp Range () lamp screen (DISP) key Communication () key Alarm () key Up ( ) key Shift ( > ) key Setting (SET) key Range () key > FLOW CHART DISPLAY BLOCK Screen Maximum Value Minimum Value Parameter setting block MUNICATI BLOCK ALARM BLOCK RANGE BLOCK Input mv / ma / V Communication system Alarm 1 setting Value Decimal point position Communication address *3 Alarm 1 Hysteresis s L side Data bit length Alarm 1 selections s H side Communication speed Latching release Sensor compensation Alarm 2 setting Value *2 Analogs L side *3 Alarm 2 Hysteresis *2 Analogs H side Alarm 2 type selections Latching release The shadowed area is only for equipment with optional functions. s: scaling *2 Analogs: Analog Output scaling *3 Alarm hysteresis: Alarm sensitivity

3 SPECIFICATIS Range : 7-segment LED (4-digit) s: Measuring range, max., min., hold Accuracy: ±.25%+1 digit of measuring range Cycle Range:.25 sec. or 2 sec. (by internal switch) Legend Change: C or F (by internal switch) Monitor : Max., min., hold, communication, alarm and range Setting Setting Method: By front key Setting Keys:, Communication, Alarm, Range, Setting, Shift and Up Type of Setting: Position of decimal point, display scaling, sensor compensation, analog output scaling, alarm, alarm sensitivity, latching, communications (interface), etc. Input Sampling Cycle:.25 sec. Thermocouples: T, J, E, K, R, S, B, WRe5-26, {U, L (DIN 4371)} Kelvin Legend: 7.~4.k (available only T / C K, option) Input Resistance: 5kΩ min. External Resistance Allowable Range: 1Ω max. Sensor Compensation: ±99.9 or ±999 Unit (depending on communication signal) Burnout Scaling: Up-scale (standard feature) R.T.D.: JPt1 / Pt1 (DIN / JIS) changeable Rated Amperage: Approx..5mA Lead Wire Resistance: 5Ω max. per wire Sensor Compensation: ±99.9 or ±9.99 Unit (depending on communication signal) Voltage: ~1mV, ~5mV or ~1mV DC changeable ~1V, ~5V, ~1V DC changeable Input Resistance: 5kΩ min Current: 4~2mA or ~2mA DC changeable Receiving Resistance: 25Ω Scaling: Only voltage and current inputs available (-1999~+9999, 1~1 counts) Setting Method & Decimal Point Position: By front key Isolation: Between input, system and various outputs Optional Functions Alarm Alarm Points: 2 Point Alarm Method: Individual setting / individual output Type of Alarm Alarm 1: Absolute value high limit or absolute value low limit (selectable) Alarm 2: Absolute value high limit, absolute value low limit, deviation high limit, deviation low limit or deviation high / low limit (selectable) Deviation high limit, deviation low limit and deviation high / low limit alarm can be selected deviation for alarm 1. Alarm Mode 1. Absolute value high limit alarm 2. Absolute value low limit alarm ( or ) 3. Deviation high limit alarm ( or ) :Alarm 1 Setting Point :Alarm 2 Setting Point 4. Deviation low limit alarm 5. Deviation high/low limit alarm

4 Alarm Setting: Alarm 1 Alarm 2 Alarm Setting (Mode 1, 2, 3, 4) -1999~ ~9999 Alarm Setting (Mode 5) 1~9999 Alarm Sensitivity:.2~9.9 or 2~99 by front key Alarm Output: 1c contact, 25V AC, 2.5A / Resistive load Inhibit / Non-Inhibit: Selectable by internal switch Latching Alarm: Available as option Analog Output Output: ~1mV DC (output resistance: 1Ω) ~1V DC (load current: 2mA max) 4~2mA DC (load resistance: 3Ω max.) Output Accuracy: ±.25%FS of display value Resolution: Approx..1%FS Isolation: Isolated between analog output, system and various outputs Output Scaling: By front key Interface Type of Interface: RS-232C, RS-422A or RS-485 Speed: 12, 24, 48 or 96 bps selectable Data Bit: 7-bit odd-parity or 8-bit non parity Address: ~31 Code: ASCII Code Isolation: Isolated between communication signal, system and various inputs and outputs Sensor Power Supply Output Rating: 24V DC (±3V) 5mA Others Data Storage: By non-volatile memory Operating Ambient Temperature / Humidity Range: -1~5 C / 9% RH max. (no dew condensation) Applicable Standard: Safety: IEC11-1 and EN611-1 EMC: EN61326 During EMC testing, the apparatus continues to operate at a measurement accuracy within ±1% of the range Power Supply: Power Consumption: Insulation Resistance: Dielectric Strength: External Dimensions: Weight: 1~24V AC 5/6Hz, 24V AC or 24V DC 1~24V AC: 14 VA max. 24V AC: 8 VA max. 24V DC: 5W max. 5V DC 2MΩ between input terminal and earth terminal 5V DC 2MΩ between power supply terminal and earth terminal One minute at 1V AC between input terminal and earth terminal One minute at 15V AC between power supply terminal and earth terminal 48 (H) x 96 (W) x 11 (D) mm Approx. 3g Latching Alarm Latching Alarm Standard alarm Latching alarm Decrease Latching Alarm set point Sensitivity Increase Measured value Latching release by key. Latching possible

5 ORDERING INFORMATI ITEMS CODE SPECIFICATIS SERIES SD DIN Size Digital Indicator 1 Thermocouple T, J, E, K, S, R, B, WRe5-26, U, L (DIN 4371) multiple input 2 R.T.D. JPt1 / Pt1 (IEC) multiple range INPUT 3 Voltage (mv) ~1, ~5, ~1mV DC 4 Current (ma) 4~2, ~2mA DC 6 Voltage (V) ~1, ~5, ~1V DC 8 Kelvin scale (only K thermocouple) Measuring range 7.~4.K 9-1~24V AC±1% 5 / 6Hz POWER SUPPLY 2-24V DC ±1% 1-24V AC ±1% (5 / 6Hz) None ALARM 1 Individual setting, individual output 2 points (1c contact) Contact capacity: 25V AC 2.5A / resistive load 11 Ditto with latching function None 3 ~1mV DC Output resistance: 1Ω 4 4~2mA DC Load resistance: 3Ω max. ANALOG OUTPUT OR INTERFACE 6 ~1V DC Max. load current: 2mA max. 15 RS RS-422A 17 RS-232C SENSOR DC POWER SUPPLY - None (WHEN USING HUMIDITY SENSOR OR UNGROUNDED SENSOR) 24-24V DC 5mA (capable of driving two sensors H71 / TH71) J In Japanese FRT PANEL INFORMATI E In English Without (for CE Marking) REMARKS 9 With (for remarks other than CE Marking) When 24V AC or 24V DC is selected, sensor DC power supply can not be selected. Multiple input programmable range Scaling range -1999~9999 Range of counts for scaling 1~1 Scaling possible (within measuring range) Note: Sensor DC power supply can not be selected. STANDARD RANGE & USER-PROGRAMMABLE SCALING Since the has been designed for user-selectable inputs, user-selectable ranges and user-programmable scaling, the unit will be shipped with one factory-set standard range. If a range selection other than the standard is required, user-selectable inputs (T / C s) and user-selectable ranges (T / C s & RTD) are available as listed below at the specific application. Standard Range (Factory-set When shipped) Input Standard / Rating Ranges Thermocouple JIS (K) -1.~8. C R.T.D Pt1-DIN ~6. C DC Voltage ~1mV.~1. No Legend DC Current 4~2mV.~1. No Legend DC Voltage ~1V.~1. No Legend CODING EXAMPLES Example 1) SD E Thermocouple input Example 2) SD E mv input (~1mV input)

6 MAX MIN HOLD AL1 AL2 ENT DISP SET SD2 MEASURING RANGE CODES & LEGEND CODES INPUT RANGE Type CODE C CODE F CODE 1 B 1B ~18 A47 32 ~ 3272 A65 R 1R ~17 A46 32 ~ 392 A64 S 1S ~17 A46 32 ~ 392 A64 K 1K -2 ~12 A ~ 2192 A79-1. ~ 8. A ~ 1472 A72 E 1E. ~ 7. A9 32 ~ 1292 A63 J 1J -1. ~ 6. A ~ 1112 A71 T 1T ~ 2. A3-328 ~ 392 A77 WRe5 / 26 1W ~23 A49 32 ~ 4172 A66 U 1U ~ 2. A3-328 ~ 392 A77 L 1L. ~ 6. A8 32 ~ 1112 A62 2 K 1K 7. ~ 4. A67 R.T.D JPt ~ 6. A ~ 1112 A78 2J (JIS). ~ A2 32. ~ 212. A61 Pt ~ 6. A ~ 1112 A78 2F (JIS / IEC). ~ A2 32. ~ 212. A61 ~1mV 32 mv ~5mV 34 ~1mV 36 ma ~2mA 41 Scaling Range: -1999~9999 4~2mA 42 Span : 1~1 count ~1V 62 V ~5V 64 ~1V 66 Note 1) Thermocouple (B): Accuracy guarantee not applicable temperature below 4 C or 75 F *2 Thermocouple (K): 7.~4.K (Kelvin Legend Only) Thermocouple LEGEND CODE LEGEND CODE No legend I / min 3 C 1 I / h 31 F 2 m 3 / min 32 %RH 3 m 3 / h 33 % 4 Nm 3 / min 34 K 5 Nm 3 / h 35 mv 6 mm / s 36 V 7 m / s 37 ma 8 m / min 38 A 9 m / h 39 W 1 m / s 2 4 µs / cm 11 rpm 41 mbar 12 mm 42 bar 13 cm 43 psi 14 m 44 psig 15 mm 3 45 Pa 16 cm 3 46 kpa 17 m 3 47 mmh2o 18 in 48 mh2o 19 lb 49 inh2o 2 g 5 mmhg 21 kg 51 cmhg 22 t 52 inhg 23 l 53 l / s 24 ppm 54 kg / h 25 ph 55 kg / cm 2 26 cal 56 kgf / cm 2 27 kcal 57 Torr 28 Blank 58 mmaq 29 Blank 59 Codes 58 and 59 are for customers to fill out. EXTERNAL DIMENSIS & TERMINAL ARRANGEMENT External Dimensions Panel Cutout x Terminal Arrangement V DC 12W 24VAC 5/6Hz12VA GR 1to24VAC ALARM1 ALARM2 5/6Hz1VA 2.5A24VAC 2.5A24VAC HOLD NO1 NC1 NO2 NC2 C1 C2 BCD OUTPUT A B B RESET + - TERMINAL SPECIFICATI A-OUTPUT - + RS-232C SG SD RD RS-422A SG SD- SD+ RD- RD+ RS-485 SG - + DC OUTPUT (24V DC 5mA) - + A-output (Analog output) more than 11mm (Unit : mm) more than 7mm ISO 91 (The contents of this brochure are subject to change without notice.) Temperature and Humidity Control Specialists Head Office: Kitamachi, Nerima-Ku, Tokyo Japan Phone: Fax: exp-dept@shimaden.co.jp URL: ESD2 13