Transmitters/Sensors. OLCT Series

Transcription

1 Transmitters/Sensors Gas Monitoring Solutions OLCT Series SIL2 based on EN (OLCT 60 based on EN 50271) FLP approved Intrinsically Safe (IS) Precalibrated block module local or remote IP66 Non-intrusive and one-man calibration on OLCT 60 The Gas Detection People

2 OLCT Series Let s protect your personnel together ATEX production certifi ed, Industrial Scientifi c has provided entire gas measurement systems, from sensors to control units, for more than 50 years. Our equipment meets the latest requirements of the European standards series EN 61779, which evaluates the performance of gas detectors and control units (response time, accuracy, resistance to poisons, alarm activation, etc.). Trust us to help you choose a solution that complies to the ATEX 94/9/EC directive for safety equipment. REGULATIONS The European directive ATEX/1999/92/CE regarding protection of the health and safety of workers that could be exposed to the risk of explosive atmospheres went into effect on July 1, Written into national law by the various ministries responsible for work in the EEC, it specifi cally requires that the employer perform the following functions: Determine the danger and assess the risks (resulting in classifying zones); Take specifi c measures to ensure safety and protect the health of workers exposed to ATmospheres EXplosives (ATEX - Explosive Atmospheres); Guarantee a safe work environment and, when workers are present, ensure appropriate monitoring based on the risk assessment; Publish an Explosion Protection Document, which lists, for example, the Important Safety Equipment that is used to limit or prevent the formation of ATEX. Applicable to new workplaces since July 1, 2003, all work places requiring employee protection in an ATEX zone must be in compliance by July 1, Nearly all industrial sectors are involved because most industrial processes could result in the formation of explosive atmospheres. The Oldham line of transmitters/sensors meet the highest security levels of SIL2 (EN for series , EN for series 60).

3 GAS HAZARD PREVENTION OLC 20D AND OLC 50 COMBUSTIBLE GAS DETECTORS When combined with an Industrial Scientifi c control unit, OLC 20D and OLC 50 detectors are inexpensive solutions for measuring explosive gases. High temperature versions can be used up to 200ºC. The units are extremely resistant to poisons, robustly designed, and easy to install and connect. The OLC 20D and OLC 50 are widely used in all types of industries and in gas and dust ATEX zones. OLCT 20D, OLCT 40 AND OLCT 50 MODELS OLCT 20D, OLCT 40 and OLCT 50 transmitters are used for detecting combustible or toxic gases and oxygen. OLCT 50 These detector-transmitters use the same precalibrated sensor block. They are available in explosion-proof or intrinsically safe versions for use in gas and dust ATEX zones. OLCT 40 SERIES 60 The OLCT 60 transmitter is designed to detect combustible or toxic gases and oxygen. Equipped with a local display, it features non-intrusive calibration to reduce maintenance costs and limitations associated with performing service in ATEX zones (no need for a fi re permit, for example). The OLCT 60 is explosion-proof and can be equipped with an optional intrinsically safe sensor for more effective detection of certain toxic gases. OLCT 60 OLCT 60D Measurements can be taken in Zones 0 or 20 when this sensor is installed remotely (up to 15 meters), such as in the OLCT 60D version. The OLCT 60 can also be used in conjuction with our OLCT IR infrared gas transmitter. This unique combination offers you reliability (MTBF of the OLCT IR is 28 years) and user friendliness. See OLCT IR brochure for more details. OLCT60 combined with an OLCT IR

4 OLCT Series Outside ATEX zone Acquisition System/ Controller IS Barrier Blue shielded or IS cable - 2 Wires OLCT 50 OLCT 20 Toxic gases or O 2 OLC 20D Shielded cable - 3 Wires Shielded cable - 2 Wires (Toxic gases or O 2) - 3 Wires (Combustible gases) Shielded cable - 3 Wires OLCT 60D OLCT 50 Toxic gases or O 2 OLCT 40 OLCT 50 OLC 20 OLCT 20 Explosive Zone (zones 1, 21 or 2, 22) Installation Warnings Explosive Zone (zones 1, 21 or 2, 22) Explosive Zone (zones 0, 22) Do not place the detector with its head upward. Do not place cable gland upward. RECOMMENDED CABLING NEW GENERATION: NEW BENEFITS Sensors meet the ATEX directive and can be used in gas or dust zones. Module blocks in 316L stainless steel ensure resistance to corrosion. IP 66, OLC and OLCT detectors are sealed against dust and fl uid discharge. Precalibrated sensors can be disconnected by rotating them. Sensors with an electronic circuit can be calibrated, away from explosive areas, on a stand-alone calibration bench or locally on the OLCT 60, nonintrusively using a magnetic key. ACCESSORIES 1. Tool kit 2. Gas inlet device 3. Gas circulation head for combustible gases, CO, H 2 S, O 2 4. Anti-spill device 5. Remote gas injection head 6. Attachment bracket 7. Gas collector 8. Pitot tube 9. Stirrup bracket for the remote block module

5 SENSOR MEASURING RANGES SENSOR AND RANGES SPECIFICATIONS AND FEATURES GAS TYPE OF SENSOR RANGE OPERATING RELATIVE AVERAGE T50 (IN PPM, HUMIDITY NOT PRESSURE PRECISION* LIFE TEMPERATURE* (IN S) IF NOT STATED) CONDENSATE (IN MONTHS) O % vol -20ºC to 50ºC 10% to 95% RH Atm +/- 10% from 5 to 30% = 0.4% vol 28 6 CO 100, 300 and 1,000-20ºC to 50ºC 15% to 90% RH Atm +/- 10% +/- 2 ppm (range ppm) H 2 S and 1,000-20ºC to 50ºC 15% to 90% RH Atm +/- 10% +/- 1.5 ppm (range 0-30 ppm) NO 100, 300 and 1,000-20ºC to 50ºC 15% to 90% RH Atm +/- 10% +/- 2 ppm (range ppm) NO and ºC to 50ºC 15% to 90% RH Atm +/- 10% +/- 0.8 ppm (range 0-10 ppm) SO , 30.0 and ºC to 50ºC 15% to 90% RH Atm +/- 10% +/- 0.7 ppm (range 0-10 ppm) Cl ºC to 50ºC 10% to 90% RH Atm +/- 10% +/- 0.5 ppm H 2 2,000-20ºC to 50ºC 15% to 95% RH Atm +/- 10% +/- 5 ppm (range ppm) HCI 30.0 and ºC to 40ºC 15% to 90% RH Atm +/- 10% +/- 0.5 ppm (range 0-10 ppm) HCN 10.0 and ºC to 40ºC 15% to 95% RH Atm +/- 10% +/- 0.3 ppm (range 0-10 ppm) HF ºC to 30ºC 15% to 90% RH Atm +/- 10% +/- 0.5 ppm NH ,000 5,000-20ºC to 40ºC 15% to 90% RH Atm +/- 10% +/- 5 ppm +/- 20 ppm +/- 10% of the measurement from 0 to 1,000 ppm +/- 150 ppm above ETO/PRO ºC to 50ºC 15% to 90% RH Atm +/- 10% +/- 1 ppm O ºC to 40ºC 15% to 90% RH Atm +/- 10% +/ ppm PH ºC to 40ºC 20% to 90% RH Atm +/- 10% +/ ppm CIO ºC to 50ºC 10% to 90% RH Atm +/- 10% +/- 0.3 ppm SIH ºC to 40ºC 20% to 95% RH Atm +/- 10% +/- 1 ppm COCl ºC to 40ºC 15% to 90% RH Atm +/- 10% +/ ppm AsH ºC to 40ºC 20% to 90% RH Atm +/- 10% +/ ppm CH 4 Thermal conductivity 0-100% vol -20ºC to 50ºC 0% to 95% RH Atm +/- 10% +/- 1% vol 60 5 H 2 Thermal conductivity 0-100% vol -20ºC to 50ºC 0% to 95% RH Atm +/- 10% +/- 1% vol 60 5 Combustible Gas Catalytic Double infrared beam 0-100% LEL -20ºC to 70ºC -20ºC to 200ºC 0% to 95% RH Atm +/- 10% +/- 1% LEL between 0-60% LEL % LEL -25 C to +55 C 0 to 99% RH Atm +/- 10% +/- 3% LEL CH 4 or +/- 5% of the value +/- 2% LEL HC or +/- 3% of the value > 60 7 Freon Semi conductor 0-2,000-20ºC to 60ºC 20% to 90% RH Atm +/- 10% +/- 15% relative alarm threshold VOC Semi conductor ºC to 60ºC 20% to 95% RH Atm +/- 10% +/- 15% relative alarm threshold * Temperature at 20ºC and at atmospheric pressure GAS IS FLP O 2 Yes Yes CO Yes Yes H 2 S Yes Yes NO Yes Yes NO 2 Yes No SO 2 Yes No Cl 2 Yes No H 2 S Yes Yes HCL Yes No HCN Yes No Freon No Yes GAS IS FLP VOC No Yes NH 3 Yes Yes ETO/PRO Yes No O 3 Yes No PH 3 Yes No AsH 3 Yes No ClO 2 Yes No COCl 2 Yes No SiH 4 Yes No HF Yes No

6 OLCT Series TRANSMITTER OLC 20D OLC 50 OLCT 20D Type FLP Sensor FLP Sensor FLP sensor transmitter IS sensor transmitter Detection method Catalytic Catalytic Catalytic/ electrochemical Gases Detected Combustible gases Combustible gases Combustible, toxic gases, oxygen and freon Casing 316L SS Alumina Alloys 316L SS Module material 316L SS 316L SS 316L SS Precalibrated block no no yes Power supply to the sensor By control station Industrial Scientific only By control station Industrial Scientific only 15 to 30 VDC (catalytic and semi-conductor) 10 to 30 VDC Toxic gases and oxygen 10 to 26 VDC Consumption See control station Industrial Scientific See control station Industrial Scientific 100 ma (catalytic and semi-conductor) 25 ma 25 ma Output signal Wheatstone bridge Wheatstone bridge 4-20 ma Electrical resistance Not applicable Not applicable Cabling Shielded 3 wire Shielded 3 wire 250 Ω (catalytic) based on feed current Shielded 3 wire (catalytic and semi conductor) Shielded 2 wire 47 Ω max Shielded 2 wire Loop resistance on Industrial Scientific control station 32 Ω (catalytic) (1 km in 1.5 mm 2 ) 32 Ω (catalytic) (1 km in 1.5 mm 2 ) 32 Ω (catalytic) (1 km in 1.5 mm 2 ) 128 Ω (4 km in 1.5 mm 2 ) 32 Ω (1 km in 1.5 mm 2 ) IP rating IP66 IP66 IP66 Certification (EX) EEx d IIC T6 II2 GD 0004 X (EX) EEx d IIC T6 ATEX II2 GD 0027X (EX) EEx d IIC T6 II2 GD 0004 X (EX) EEx d IIC T4 II 1 GD 0004 X Electro-magnetic compatibility Meets EN Meets EN Meets EN Weight 800 gr 1.1 kg 800 gr Dimensions 177 mm x dia mm x 160 mm x 121 mm 177 mm x dia. 60 Operating temperature (electronics) -25ºC to 70ºC -20ºC to 200ºC in high temp version -25ºC to 70ºC -20ºC to 200ºC in high temp version -25ºC to 60ºC

7 TECHNICAL SPECIFICATIONS OLCT 40 OLCT 50 OLCT 60(D) TRANSMITTERS FLP sensor transmitter IS sensor transmitter FLP sensor transmitter IS sensor transmitter Catalytic/ electrochemical Combustible, toxic gases, oxygen and freon Toxic gases and oxygen Catalytic/ electrochemical Combustible, toxic gases, oxygen and freon Toxic gases and oxygen FLP Sensor Transmitter with display and FLP module Catalytic/ electrochemical semi conductors Combustible, toxic gases, oxygen, freons and VOC FLP sensor transmitter with display and IS module Toxic gases and oxygen Type Detection method Gases Detected Polycarbonate Alumina Alloys Alumina Alloys Casing 316L SS 316L SS 316L SS Module material yes yes yes yes Precalibrated block 15 to 30 VDC (catalytic) 10 to 30 VDC 100 ma (catalytic and semi-conductor) 25 ma 10 to 26 VDC 25 ma 15 to 30 VDC (catalytic) 10 to 30 VDC 100 MA (catalytic and semi-conductor) 25 ma 10 to 26 VDC 16 to 30 VDC 25 ma 100 ma (catalytic) 40 ma 3.7 W (with peak of 550mA) for the OLCT60/OLCT IR 40 ma Power supply to the sensor Consumption 4-20 ma 4-20 ma 4-20 ma 4-20 ma Output signal 250 Ω (catalytic) based on feed current Shielded 3 wire (catalytic and semi-conductor) Shielded 2 wire 32 Ω (catalytic) (1 km in 1.5 mm 2 ) 128 Ω (4 km in 1.5 mm 2 ) (EX) EEx d IIC T6 II2 GD 0006 X 130 mm x 207 mm x 69 mm 47 Ω max Shielded 3 wire 32 Ω (1 km in 1.5 mm 2 ) 250 Ω (catalytic and semi-conductor) based on feed current Shielded 3 wire (catalytic and semi-conductor) Shielded 2 wire 32 Ω (catalytic) (1 km in 1.5 mm 2 ) 128 Ω (4 km in 1.5 mm 2 ) 47 Ω max 250 Ω Electrical resistance Shielded 3 wire Shielded 3 wire Cabling 32 Ω (1 km in 1.5 mm 2 ) 32 Ω (catalytic) (1 km in 1.5 mm 2 ) 48 Ω (1.5 km in 1.5 mm 2 ) 8 Ω (200m en 1.5mm²) for the OLCT60/OLCTIR 48 Ω (1.5 km in 1.5 mm 2 ) Loop resistance on Industrial Scientific control station IP66 IP66 IP66 IP rating (EX) EEx d IIC T4 II 1 GD 0006 X (EX) EEx d IIC T6 II2 GD 0027 X (EX) EEx d IIC T4 II 1 GD 0027 X (EX) EEx d IIC T6 II2 GD 0027 X SIL2 EN EEx d IIC T6 (for the OLCT60) Ex de IIC T4 (for the detection head OLCTIR) (EX) EEx d [ia] la IIC T4 ATEX II 2 GD 0027 X SIL2 based on EN Certification Meets EN Meets EN Meets EN Electro-magnetic compatibility 1.3 kg 1.9 kg 2.1 kg; 4.08 kg for the OLCT60/OLCT IR Weight 130 mm x 120 mm x 69 mm 154 mm x 233 mm x 121 mm 154 mm x 186 mm x 121 mm mm x mm x 169 mm for the OLCT60/OLCT IR -25ºC to 60ºC -25ºC to 60ºC -25ºC to 55ºC Dimensions Operating temperature (electronics)

8 OUR MISSION Preserving human life on, above and below the earth Delivering highest quality, best customer service... every transaction, every time Test and calibration gas For your safety, test and calibrate your gas monitors regularly. REV 1009 AMERICAS ASIA PACIFIC EUROPE Phone: Fax: Phone: Fax: Phone: Fax: