TECHNICAL PROGRAMME SECTION B: STANDARDS APPROVED
|
|
- Ashley George
- 6 years ago
- Views:
Transcription
1 APPROV INTERNATIONAL RELATNESS SANS Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests ISO 188: SANS 97 SABS Electric cables - Impregnated paper-insulated metal-sheathed cables for rated voltages 3,3/3,3 kv to 19/33 kv (excluding pressure assisted cables) SANS 105-B02 SABS ISO 105-B Textiles - Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test ISO 105-B02: SANS 132 SABS ISO Coal and coke - Calculation of analyses to different bases ISO 1170: SANS 151 SABS Fixed electric storage water heaters SANS Plug and socket-outlet systems for household and similar purposes for use in South Africa - Part 0: General and safety requirements SANS Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 4: Dedicated system, 16 A 250 V a.c SANS 171 SABS SM Glassware and equipment for microbiological tests SANS 226 SABS Water taps (metallic bodies) SANS 292 SABS Wooden handles for hammers SANS 320 SABS Men's heavy boots, service type (Goodyear welted) SANS 321 SABS The production of men's boots (Goodyear welted, with stitched or stuck-on outer soles) SANS 342 SABS Automotive fuel - Requirements and test methods for diesel SANS Standard test method for aluminium in water ASTM D 857: B- 1 SABS STANDARDS TECHNICAL PROGRAMME APRIL
2 APPROV INTERNATIONAL RELATNESS SANS Standard test methods for iron in water ASTM D 1068: SANS 421 SABS The production of men's shoes (Goodyear welted with stitched or stuck-on outer soles) SANS 434 SABS Personal Protective Clothing SANS 449 SABS The manufacture of soft drinks and soft drink concentrates SANS Automated meter reading for large power users NRS 071: SANS Vehicle security - Whole-of-vehicle marking Part 1: Microdot systems SANS Fluids for electrotechnical applications Part 2: Unused uninhibited mineral insulating oils for transformers and switchgear SANS Fluids for electrotechnical applications Part 4: Recycled uninhibited mineral insulating oils for transformers and switchgear SANS Low-voltage switchgear Part 2-5: Earth leakage switches - Switches that incorporate residual current protection SANS 558 SABS Cast iron surface boxes and manhole and inspection covers and frames SANS 587 SABS Canned fish, canned marine molluscs and canned crustaceans, and products derived therefrom SANS Side upper leather (with a smooth corrected grain) SANS Lining leather (chrome-tanned syntan-retanned side) SANS Requirements for the receiving, handling, transportation and storage of imported genetically modified commodities not approved for general release B- 2 SABS STANDARDS TECHNICAL PROGRAMME APRIL
3 APPROV INTERNATIONAL RELATNESS SANS Polymer film for damp-proofing and waterproofing in buildings Part 1: Monofilament and co-extruded products SANS SABS Storage of firearms and ammunition Part 2: Strongrooms SANS Photovoltaic systems for use in individual homes, schools and clinics Part 1: Standardized requirements applicable to off-grid individual homes, schools and clinics NRS 052-1: SANS Photovoltaic systems for use in individual homes, schools and clinics Part 2-2: Test procedures for main components - Batteries NRS : SANS Photovoltaic systems for use in individual homes, schools and clinics Part 2-3: Test procedures for main components - Regulators, charge controllers and maximum power point trackers (MPPTs) NRS : SANS Photovoltaic systems for use in individual homes, schools and clinics Part 2-4: Test procedures for main components - Inverters NRS : SANS 1029 SABS Miniature substations for rated a.c. voltages up to and including 24 kv NRS 004: SANS 1044 SABS Industrial laundry detergents SANS 1083 SABS Aggregates from natural sources - Aggregates for concrete SANS 1224 SABS Polish stripper SANS 1253 SABS Fire-doors and fire-shutters SANS Local goods, services and works - Measurement and verification of local content SANS 1344 SABS Medium duty solvent detergent SANS Organic agriculture production and processing B- 3 SABS STANDARDS TECHNICAL PROGRAMME APRIL
4 APPROV INTERNATIONAL RELATNESS SANS 1387 SET SABS 1387 SET Woven cotton and similar apparel fabrics Parts SANS SABS Materials of insulated electric cables and flexible cords Part 5: Halogen-free, flame-retardant materials SANS 1420 SABS Bed bases (spring upholstered) SANS 1437 SABS Footwear soling material and footwear sole and heel component SANS Electricity payment systems Part 1-1: Mounting and terminal requirements for payment meters NRS : SANS Electricity payment systems Part 4: Payment electricity meter cards NRS 009-4: SANS Electric flexible cables with solid extruded dielectric insulation Part 3: PVC-insulated cables for industrial use SANS Electric flexible cables with solid extruded dielectric insulation Part 4: Rubber-insulated cables for domestic, office and similar environments (cords) SANS 1601 SABS Structured wall pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) for buried drainage and sewerage systems SANS 1638 SABS Pneumatically powered chain hoists SANS Self-ballasted L tubular lamps for general lighting services > 50 V - Safety requirements SATS UVGI Luminaires - Safety and performance requirements SANS End user related Quality of Service parameter definitions and measurements Part 1: GSM voice SANS Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) ISO 1716: B- 4 SABS STANDARDS TECHNICAL PROGRAMME APRIL
5 APPROV INTERNATIONAL RELATNESS SANS Insulation for special equipment used in refrigerated transport - Requirements and test methods SANS Servicing valves for domestic terminal water fittings or appliances SANS Strategic Facilities Management System - Requirements SANS Lubricants, industrial oils and related products (class L) - Family T (Turbines) - Specification for lubricating oils for turbines ISO 8068: SANS Geotextiles and geotextile-related products - Identification on site ISO 10320: SANS 1827 SABS The safety of water treatment chemicals for use in the food industry SANS 1835 SABS Ductile iron pipes, fittings, accessories and their joints, for use in high and low pressure systems for potable and foul water SANS Disinfectants, detergent-disinfectants and antiseptics for use in the food industry SANS Low-voltage switchgear and controlgear ASSEMBLIES Part 1: Type-tested ASSEMBLIES with stated deviations and a rated short-circuit withstand strength above 10 ka SANS 2076 SABS ISO Textiles - Man-made fibres - Generic names ISO 2076: SANS General principles on reliability for structures ISO 2394: SANS Railway safety management Part 1: General SANS Railway safety management Part 2-1: Requirements for systemic engineering and operational safety standards - Electrical distribution and overhead traction systems B- 5 SABS STANDARDS TECHNICAL PROGRAMME APRIL
6 APPROV INTERNATIONAL RELATNESS SANS 3001-PD Civil engineering test methods Part PD1: Determination of permanent deformation and moisture sensitivity in asphalt mixes with the MMLS SANS Iron ores for blast furnace feedstocks - Determination of low-temperature reductiondisintegration indices by static method Part 1: Reduction with CO, CO2, H2 and N2 ISO : SANS 5187 SABS SM Fatty matter content of soap products SANS 5188 SABS SM Unsaponified plus unsaponifiable matter content of soap products SANS 5189 SABS SM Alcohol-insoluble matter content of soap products SANS 5419 SABS SM Pesticides - Evaluation of rodentproofness of building materials and constructions SANS 5614 SABS SM Resistance to growth of Trichophyton interdigitale SANS Water quality - Sampling Part 13: Guidance on sampling of sludges ISO : SANS Water quality - Sampling Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling ISO : SANS SABS ISO Water quality - Sampling Part 15: Guidance on the preservation and handling of sludge and sediment samples ISO : SANS 5997 SABS SM Zinc detection in timber SANS 6094 SABS SM Stock remedies - Efficacy of chemicals against tick larvae SANS 6097 SABS SM Stock remedies - Stripping rate of cattle tickicides in spray races SANS 6938 SABS ISO Textiles - Natural fibres - Generic names and definitions ISO 6938: B- 6 SABS STANDARDS TECHNICAL PROGRAMME APRIL
7 APPROV INTERNATIONAL RELATNESS SANS SABS ISO Methods for the petrographic analysis of coals - Part 3: Method of determining maceral group composition ISO : SANS SABS ISO Methods for the petrographic analysis of coals - Part 5: Method of determining microscopically the reflectance of vitrinite ISO : SANS SABS ISO/IEC Identification cards - Recording technique Part 1: Embossing ISO/IEC : SANS SABS ISO/IEC Identification cards - Identification of issuers Part 2: Application and registration procedures ISO/IEC : SANS SABS ISO/IEC Identification cards - Integrated circuit(s) cards with contacts Part 1: Physical characteristics ISO/IEC : SANS SABS ISO/IEC Identification cards - Integrated circuit cards Part 4: Organization, security and commands for interchange ISO/IEC : SANS Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation ISO 9080: SANS Iron ores - Determination of magnesium - Flame atomic absorption spectrometric method ISO 10204: SANS SABS The petroleum industry Part 2: Electrical and other installations in the distribution and marketing sector SANS SABS The use of high-strength friction-grip bolts SANS SABS The classification of hazardous locations and the selection of equipment for use in such locations SANS SABS The wiring of premises Part 1: Low-voltage installations SANS Basis of structural design and actions for buildings and industrial structures Part 4: Seismic actions and general requirements for buildings B- 7 SABS STANDARDS TECHNICAL PROGRAMME APRIL
8 APPROV INTERNATIONAL RELATNESS SANS SABS The selection, handling and installation of electric power cables of rating not exceeding 33 kv Part 8: Cable laying and installation SANS SABS Design of structures for the mining industry Part 4: Shaft system structures SANS SABS Evaluation of vehicle test stations SANS SABS The rewinding and refurbishing of rotating electrical machines Part 1: Low-voltage threephase induction motors SANS SABS Water supply and drainage for buildings Part 1: Water supply installations for buildings SANS The warehousing of dangerous goods Part 0: General requirements SANS D The application of the National Building Regulations Part D: Public safety SANS Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HH, HL, HM, HV and HG. ISO 11158: SANS Solid mineral fuels - Hard coal - Determination of moisture in the general analysis test sample by drying in nitrogen ISO 11722: SANS Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test ISO :2010 +Cor 1: SANS SABS EN Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal (including Legionella), mycobactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity EN 12353: B- 8 SABS STANDARDS TECHNICAL PROGRAMME APRIL
9 APPROV INTERNATIONAL RELATNESS SANS Lubricants, industrial oils and related products (class L) - Family C (Gears) - Part 1: Specification for lubricants for enclosed gear systems. ISO : 1996, Lubricants, industrial oils and related products (class L) - Family C (Gears) - Part 1: Specification for lubricants for enclosed gear systems. ISO : SANS Statistical methods for use in proficiency testing by interlaboratory comparison ISO 13528: SATS Nanotechnologies - Guidance on voluntary labelling for consumer products containing manufactured nano-objects ISO/TS 13830: SANS Environmental management - Water footprint - Principles, requirements and guidelines ISO 14046: SANS Information technology - Software measurement - Functional size measurement Part 6: Guide for use of ISO/IEC series and related International Standards ISO/IEC : SANS Medical laboratories - Requirements for safety ISO 15190: SANS Information technology - Process assessment Part 5: An exemplar process assessment model ISO/IEC : SANS Systems and software engineering - Software Engineering Environment Services ISO/IEC 15940: SANS Statistical methods - Six Sigma - Basic criteria underlying benchmarking for Six Sigma in organisations ISO 17258: SANS Information technology - Automatic identification and data capture techniques - QR Code 2005 bar code symbology specification ISO/IEC 18004: SANS Geographic information - Rules for application schema ISO 19109: SATS Geographic information - Content components and encoding rules for imagery and gridded data - Part 1: Content model ISO/TS : B- 9 SABS STANDARDS TECHNICAL PROGRAMME APRIL
10 APPROV INTERNATIONAL RELATNESS SANS Software engineering - COSMIC: a functional size measurement method ISO/IEC 19761: SANS SABS ECE R Uniform provisions concerning the approval for the production of retreaded pneumatic tyres for commercial vehicles and their trailers ECE R109: SANS Gas cylinders - Refillable welded aluminium-alloy cylinders - Design, construction and testing ISO 20703: SATR Adventure tourism - Leaders - Personnel competence ISO/TR 21102: SANS Adventure tourism - Information for participants ISO 21103: SANS Food safety management systems - Guidance on the application of ISO 22000:2005 ISO/TS 22004: SANS Point-of-care testing (POCT) -- Requirements for quality and competence ISO 22870: SATR Systems and software engineering - Life cycle management - Guidelines for process description ISO/IEC TR 24774: SANS Information technology - Governance of digital forensic risk framework ISO/IEC 30121: SANS Information and documentation - Management systems for records-guidelines for implementation ISO 30302: SANS Safety of toys - Part 14: Trampolines for domestic use EN 71-14: SANS Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games EN 71-13: SANS Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 20: Passenger and goods passenger lifts EN 81-20: B- 10 SABS STANDARDS TECHNICAL PROGRAMME APRIL
11 APPROV INTERNATIONAL RELATNESS SANS Safety rules for the construction and installation of lifts - Examinations and tests - Part 50: Design rules, calculations, examinations and tests of lift components EN 81-50: SANS SABS EN Cement Part 2: Conformity evaluation EN 197-2: SANS Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods EN 958:2006 +AM 1: SANS Personal fall protection equipment - Rescue harnesses EN 1497: SANS Buoyant aids for swimming instruction Part 1: Safety requirements and test methods for buoyant aids to be worn EN : SANS Buoyant aids for swimming instruction Part 2: Safety requirements and test methods for buoyant aids to be held EN : SANS Buoyant aids for swimming instruction Part 3: Safety requirements and test methods for swim seats to be worn EN : SANS Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item EN 13823:2010 +IS 1: SANS Fire safety cabinets Part 1: Safety storage cabinets for flammable liquids SANS Power transformers Part 10-1: Determination of sound levels - Application guide IEC : SANS Power transformers Part 15: Gas-filled power transformers IEC : SANS Explosive atmospheres Part 10-1: Classification of areas - Explosive gas atmospheres IEC :2015 +Cor 1: SANS SABS IEC Explosive atmospheres Part 18: Equipment protection by encapsulation "m" IEC : B- 11 SABS STANDARDS TECHNICAL PROGRAMME APRIL
12 APPROV INTERNATIONAL RELATNESS SANS Explosive atmospheres Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen IEC : SANS SABS IEC Low-voltage fuses Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K IEC : +IS 1: SANS SABS IEC Low-voltage fuses Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices IEC : SANS SABS IEC Household and similar electrical appliances - Safety Part 2-3: Particular requirements for electric irons IEC :2015 +AM 1: SANS SABS IEC Household and similar electrical appliances - Safety Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances IEC :2015 +AM 1: SANS SABS IEC Household and similar electrical appliances - Safety Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam IEC : SANS SABS IEC Household and similar electrical appliances - Safety Part 2-67: Particular requirements for floor treatment machines, for commercial use IEC : +AM 1: SANS SABS IEC Household and similar electrical appliances - Safety Part 2-68: Particular requirements for spray extraction machines, for commercial use IEC : SANS SABS IEC Household and similar electrical appliances - Safety Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use IEC : SANS SABS IEC Household and similar electrical appliances - Safety Part 2-75: Particular requirements for commercial dispensing appliances and vending machines IEC :2015 +IS 1: B- 12 SABS STANDARDS TECHNICAL PROGRAMME APRIL
13 APPROV INTERNATIONAL RELATNESS SANS Medical electrical equipment Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers IEC :2013 +AM 1: SANS Medical electrical equipment Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators IEC : SANS Medical electrical equipment Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators IEC : +AM 1: SANS Medical electrical equipment Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers IEC : +IS 1: SANS Medical electrical equipment Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis IEC :2015 +AM 2: SANS Medical electrical equipment Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment IEC : +AM 1: SANS Medical electrical equipment Part 2-52: Particular requirements for the basic safety and essential performance of medical beds IEC :2015 +AM 1: SANS Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation IEC :2014 +Cor 1: SANS Short-circuit currents - Calculation of effects - Part 2: Examples of calculations IEC/TR : SANS Low-voltage switchgear and controlgear Part 2: Circuit-breakers IEC : SANS SABS IEC Low-voltage switchgear and controlgear Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units IEC : B- 13 SABS STANDARDS TECHNICAL PROGRAMME APRIL
14 APPROV INTERNATIONAL RELATNESS SANS SABS IEC Low-voltage switchgear and controlgear Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function IEC : SANS Arc welding equipment Part 5: Wire feeders IEC : SANS Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits IEC : SANS SABS IEC Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements IEC 61048:2015 +AM 1: SANS Switches for appliances - Part 1-1: Requirements for mechanical switches IEC : SANS Switches for appliances - Part 1-2: Requirements for electronic switches IEC : SANS Protection against electric shock - Common aspects for installation and equipment IEC 61140: SANS SABS IEC Composite string insulator units for overhead lines with a nominal voltage greater than V Part 1: Standard strength classes and end fittings IEC : SANS Communication networks and systems for power utility automation Part 7-410: Basic communication structure - Hydroelectric power plants - Communication for monitoring and control IEC : SATR Communication networks and systems for power utility automation - Part 90-2: Using IEC for communication between substations and control centres IEC TR : SANS Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers IEC : B- 14 SABS STANDARDS TECHNICAL PROGRAMME APRIL
15 APPROV INTERNATIONAL RELATNESS SANS Instrument transformers - Part 9: Digital interface for instrument transformers IEC : SANS Cable cleats for electrical installations IEC 61914: SANS Power capacitors - Low-voltage power factor correction banks IEC 61921: SANS Electricity metering data exchange - The DLMS/COSEM suite-part 3-1: Use of local area networks on twisted pair with carrier signalling IEC : SATS Electricity metering data exchange - The DLMS/COSEM suite - Part 9-1: Communication profile using web-services to access a DLMS/COSEM server via a COSEM Access Service (CAS) IEC/TS : SANS Enterprise-control system integration - Part 1: Models and terminology IEC : SANS Fuel cell technologies Part 3-200: Stationary fuel cell power systems - Performance test methods IEC : SANS Self-ballasted L-lamps for general lighting services by voltage > 50 V - Safety specification IEC 62560:2015 +AM 1: SANS Self-ballasted L lamps for general lighting services with supply voltages > 50 V - Performance requirements IEC 62612: SANS Programmable componets in electronic lamp controlgear-general and safety requirement IEC 62733: SATS Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 7: Competence requirements for auditing and certification of road traffic safety management systems ISO/IEC TS : SANS Statistical methods in process management - Capability and performance,part 8: Machine performance of a multi-state production process ISO : B- 15 SABS STANDARDS TECHNICAL PROGRAMME APRIL
16 APPROV INTERNATIONAL RELATNESS SATS Information technology - Process reference model (PRM) for information security management ISO/IEC TS 33052: ARP Installation and maintenance of luminaires for Ultraviolet Germicidal Irradiation (UVGI) ARP Wildlife rehabilitation- Specific housing requirements- Birds ARP Instructions for use of products by consumers ISO/IEC GUIDE 37: B- 16 SABS STANDARDS TECHNICAL PROGRAMME APRIL
Standards - Withdrawn The dates in brackets following the document number are the year of publication and the withdrawal date.
SANS 19 (2007) (2018-03-02) The inspection, testing and examination of mobile cranes Covers provisions for the inspection, testing and examination of mobile cranes in use. Does not cover the inspection,
More informationIEC NORMAS PUBLICADAS. As normas ISO/IEC já estão relacionadas em normas ISO Publicadas
IEC NORMAS PUBLICADAS As normas ISO/IEC já estão relacionadas em normas ISO Publicadas IEC/TC 1 - Terminology IEC 60050-161-am5 ed1.0 (2015-02) - Amendment 5 - International Electrotechnical Vocabulary
More informationStandards - Consolidated with amendments The dates in brackets following the document number are the year of publication and the approval date.
SANS 110 (SABS 110) (2017) (2017-11-17) Sealing compounds for the building industry, two-component, polysulphide base Covers two types of elastomeric two-component polysulphide base joint sealing compounds
More informationTECHNICAL PROGRAMME SECTION B: STANDARDS APPROVED
TECHNICAL PROGRAMME SECTION B: STANDARDS APPROV APPROV INTERNATIONAL RELATNESS SANS 164-1 SABS 164-1 -01-29 5.03 067-03 Plug and socket-outlet systems for household and similar purposes for use in South
More informationIEC NORMAS PUBLICADAS. As normas ISO/IEC já estão relacionadas em normas ISO Publicadas
IEC NORMAS PUBLICADAS As normas ISO/IEC já estão relacionadas em normas ISO Publicadas TC 1 - Terminology IEC 60050-614:2016 - International electrotechnical vocabulary - Part 614: Generation, transmission
More informationStandards - Withdrawn The dates in brackets following the document number are the year of publication and the withdrawal date.
SANS 506 (2011) (2017-08-04) Timber preservative - Alkaline-copper-quaternary type Covers two types of alkaline-copper-quaternary (ACQ) type timber preservatives and gives minimum and maximum values of
More informationIEC PROJETOS EM VOTAÇÃO SETEMBRO E OUTUBRO. IEC ED1 - Rotating electrical machines - Part 23: Repair, overhaul and reclamation
IEC PROJETOS EM VOTAÇÃO SETEMBRO E OUTUBRO IEC/TC 2 - Rotating machinery IEC 60034-23 ED1 - Rotating electrical machines - Part 23: Repair, overhaul and reclamation IEC 60034-14 ED4 - Rotating electrical
More information(Notices) EUROPEAN COMMISSION
14.8.2012 Official Journal of the European Union C 245/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework
More informationIEC PROJETOS EM VOTAÇÃO
IEC PROJETOS EM VOTAÇÃO IEC/TC 10 - Fluids for electrotechnical applications. ATÉ 25 DE JULHO DE 2014 IEC 60599 Ed.3: Mineral oil-impregnated electrical equipment in service - Guide to the interpretation
More informationIEC NORMAS PUBLICADAS SETEMBRO E OUTUBRO DE 2018
IEC NORMAS PUBLICADAS SETEMBRO E OUTUBRO DE 2018 IEC/TC 2 - Rotating machinery IEC 60034-14:2018 - Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56
More informationTECHNICAL PROGRAMME SECTION B: STANDARDS APPROVED
SANS 47 SABS 47-08-15 3.02 1022 Coal-tar type disinfectant liquids (black and white) 71.100.35 SANS 164-2-1-07-25 067-03 Plug and socket-outlet systems for household and similar purposes for use in South
More informationStandardization Programme ( ) Building & Construction Standards Committee
Standardization Programme (2012-2013) Building & Construction Standards Committee Projects Title 2012 2013 Jul Aug Sep Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1 EN 12811: 2 EN 197-1:2011
More informationIEC/TC IEC/TC44 IEC/TC44. Amd.1DC:201. Ed.3CD:2011. Ed.2.1:2008. Amd.1CDV ED.1: 一連番号 Ed.
IEC/TC44 20-3-7 IEC/TC44 IEC/TC44 6 TC44 TC44 TC44 TC44 TC44 WD, CD, CDV TC44 一連番号 IEC 60027-:992 (Ed.) (995 corrected and reprinted) Letter symbols to be used in electrical technology Part : General 2
More informationMauritian Standards/Amendments Published in 2013
Mauritian Standards/Amendments Published in 2013 Reference Title 2013 Notice No. Date Gazetted 2013 1 R MS 200:2013 Energy efficiency and labelling requirements Household room air conditioners 2 MS 207:2013
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2017/C 298/02)
C 298/14 EN Official Journal of the European Union 8.9.2017 Commission communication in the framework of the implementation of Directive 2014/35/EU of the European Parliament and of the Council on the
More informationVydané medzinárodné normy a iné publikácie IEC za obdobie od do
Vydané medzinárodné normy a iné publikácie IEC za obdobie od 1. 1. 2016 do 31. 1. 2016 IEC TC/SC Dokument Dátum vydania Názov ISO/IEC JTC 1/SC 6 ISO/IEC/IEEE 8802-1AX:2016 2016-01-14 Information technology
More informationTest procedure/ method name. method identification. Testing of industrial and explosion isolation valves and tank lining
The Laboratory is qualified to update standards identifying the test procedures. The laboratory requires/applies a flexible scope of accreditation permitted as detailed in the Annex. Updated list of activities
More informationCORRIGENDA. (Publication of titles and references of harmonised standards under Union harmonisation legislation)
C 173/162 EN Official Journal of the European Union 13.5.2016 CORRIGENDA Corrigendum to Commission communication in the framework of the implementation of Directive 2006/95/EC of the European Parliament
More informationStandards - Withdrawn The dates in brackets following the document number are the year of publication and the withdrawal date.
SANS 110 (SABS 110) (2011) (2017-11-17) Sealing compounds for the building industry, two-component, polysulphide base Covers 2 types, a pouring grade and a gun grade. Requirements include resistance to
More informationSafety Standards for Electronic Products
Safety Standards for Electronic Products The following are some of the safety standards for all types of electronic products. ANSI C95.3:1972 / Techniques & instrumentation for measurement of potentially
More informationProposed standards for Chinese national adoption
Proposed standards for Chinese national adoption 1. Toys BS EN 71 *BS EN 71-1:2011+A3:2014 Safety of toys. Mechanical and physical properties (work in hand) BS EN 71-2:2011+A1:2014 Safety of toys. Flammability
More informationTECHNICAL PROGRAMME SECTION B: STANDARDS APPROVED
INTERNATIONAL RELATNESS SANS 116 SABS 116-11-14 2.02 1022 Liquid antiseptics containing substituted phenolics 11.080.20 SANS 151 SABS 151-03-31 8.00 075 Fixed electric storage water heaters 91.140.65 97.100.10
More informationDIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES BY MEMBERS OF CENELEC
DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES BY MEMBERS OF CENELEC 1st Quarter 2008 Issued on: 18 April 2008-2 - Chapter I: Register of new notifications p. 4-7 Chapter II: List
More informationCONTROLLED GOODS AND THE APPLICABLE SAFETY STANDARDS PART I DOMESTIC OR HOUSEHOLD APPLIANCES AND SIMILAR ELECTRICAL APPLIANCES
CONTROLLED GOODS AND THE APPLICABLE SAFETY STANDARDS PART I DOMESTIC OR HOUSEHOLD APPLIANCES AND SIMILAR ELECTRICAL APPLIANCES 1 Hair Dryers 8516.31 MS IEC 60335-2-23 Household and similar electrical appliances-
More informationGovernment Gazette Staatskoerant
Government Gazette Staatskoerant REPUBLIC OF SOUTH AFRICA REPUBLIEK VAN SUID AFRIKA Regulation Gazette No. 10177 10701 Regulasiekoerant Regulation Gazette Vol. 621 24 March Maart 2017 No. 40713 PART 1
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
ISO/IEC 17065:2012 to provide product conformity certification Presley Way Crownhill Milton Keynes MK8 0ES Contact: Tracie Hunter Tel: +44 (0)1908 267300 Fax: +44 (0)1908 267255 E-Mail: mail@basec.org.uk
More informationFlexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 63A Issue date 16 th June 2015 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44 (0)1244
More informationFlexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 072A Issue date 23 rd March 2018 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. April 2015
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC April 2015 Issued on 4 May 2015 Page 1 Information Procedure on Standards Notifications registered
More informationNr. Standard reference Title 1 EN 54-28:2016. Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors
Nr. Standard reference Title 1 EN 54-28:2016 Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors 2 EN 59:2016 Glass reinforced plastics - Determination of indentation
More informationAn Introduction to the IECEx System and IECEx Scheme Certification Processes IECEx Secretariat January 2018
INTERNATIONAL ELECTROTECHNICAL COMMISSION An Introduction to the IECEx System and IECEx Scheme Certification Processes IECEx Secretariat January 2018 IEC:2007 Pillars of the IEC building Standards Development
More informationISO NORMAS PUBLICADAS
ISO NORMAS PUBLICADAS ISO/IEC JTC 1 - Information technology ISO/IEC 29182-7:2015 - Information technology - Sensor networks: Sensor Network Reference Architecture (SNRA) - Part 7: Interoperability guidelines.
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. October 2014
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC October 2014 Issued on : 07 November 2014 Page 1 Information Procedure on Standards Notifications
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 17819 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 29.06.2017 to 10.08.2019 Holder of certificate: MPA
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. March 2018
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC March 2018 Issued on : 13 April 2018 Page 1 Information Procedure on Standards Notifications registered
More informationNr. Standard reference
Nr. Standard reference 1 EN 54-5:2017 2 EN ISO 5395-3:2013/A1:2017 3 EN 12574-1:2017 4 EN 16573:2017 Title Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors Garden equipment
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60694 Edition 2.2 2002-01 Edition 2:1996 consolidated with amendments 1:2000 and 2:2001 Common specifications for high-voltage switchgear and controlgear standards IEC 2002 Copyright
More informationVydané medzinárodné normy a iné publikácie IEC za obdobie od do
Vydané medzinárodné normy a iné publikácie IEC za obdobie od 1. 3. 2015 do 31.3. 2015 IEC TC/SC Dokument Dátum vydania Názov CIS/F CISPR 15:2013+AMD1:2015 CSV 2015-03-27 Limits and methods of measurement
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. February 2015
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC February 2015 Issued on : 6 March 2015 Page 1 Information Procedure on Standards Notifications registered
More informationDIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC.
DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC January 2012 Issued on : 02 February 2012 Page 1 Directive 98/34/EC Information
More informationISO NORMAS PUBLICADAS. ISO/IEC 10646: Information technology - Universal Coded Character Set (UCS).
ISO NORMAS PUBLICADAS ISO/IEC JTC 1 - Information technology ISO/IEC 10646:2014 - Information technology - Universal Coded Character Set (UCS). ISO/IEC 24771:2014 - Information technology - Telecommunications
More informationDIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC.
DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC November 2010 Issued on: 2 December 2010 Chapter I: Register of new notifications
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SIRA Certification Service Accredited to ISO/IEC 17065:2012 to provide product conformity Unit 6 Hawarden Industrial Park Hawarden Deeside
More informationDiesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method 3 EN 280:2013+A1:2015
Nr. Standard reference Title 1 EN 49-2:2015 Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 2: Application
More informationUse case methodology - Part 2: Definition of the templates for use cases, actor list and requirements list 4 IEC 60836:2015 PRV
Nr. Standard reference Title 1 IEC TS 62239-1:2015 Process management for avionics - Management plan - Part 1: Preparation and maintenance of an electronic components management plan 2 IEC TS 62686-1:2015
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. November 2017
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC November 2017 Issued on : 1 December 2017 Page 1 Information Procedure on Standards Notifications
More information13799 Commerce Parkway Richmond, British Columbia V6V 2N9 Canada Benjamin Barker, Senior Manager Accreditations
IAS Accreditation Number Company Name Address Contact Name Telephone (604) 273-4581 Effective Date of Scope February 9, 2018 Accreditation Standard ISO/IEC 17025:2005 TL-270 - Vancouver 13799 Commerce
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. March 2014
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC March 2014 Issued on : 04 April 2014 Page 1 Information Procedure on Standards Notifications registered
More informationEXPRESSION OF INTEREST (EOI) FOR. Fire Fighting System (FFS)
EXPRESSION OF INTEREST (EOI) FOR Fire Fighting System (FFS) KWtE-03-PR-EO-ACC-0 Rev01 11 Version: Date: Prepared by: Approved: 01 7/11/18 VMC AMN Page 1 OF 5 1 Project overview ACCIONA s Engineering, Procuring
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. June 2014
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC June 2014 Issued on : 04 July 2014 Page 1 Information Procedure on Standards Notifications registered
More informationIEC PROJETOS EM VOTAÇÃO. IEC 62256/Ed2: Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement.
IEC PROJETOS EM VOTAÇÃO IEC/TC 4 Hydraulic turbines IEC 62256/Ed2: Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement. IEC/TC 9 - Electrical equipment and
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 17065:2012 to provide product conformity certification Newport Business Park New Port Road Ellesmere Port CH65 4LZ United Kingdom Contact:
More informationIEC PROJETOS EM VOTAÇÃO SETEMBRO E OUTUBRO. IEC Ed.1: Railway applications - Energy mesurement on board trains - Part 2: Energy measuring
IEC PROJETOS EM VOTAÇÃO SETEMBRO E OUTUBRO IEC/TC 9 - Electrical equipment and systems for railways IEC 62888-2 Ed.1: Railway applications - Energy mesurement on board trains - Part 2: Energy measuring
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. February 2017
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC February 2017 Issued on : 3 March 2017 Page 1 Information Procedure on Standards Notifications registered
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. May 2018
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC May 2018 Issued on : 1 June 2018 Page 1 Information Procedure on Standards Notifications registered
More informationThis is a preview - click here to buy the full publication. High-voltage switchgear and controlgear
IEC/PAS 62271-109 Edition 1.0 2002-07 High-voltage switchgear and controlgear Part 109: Alternating-current series capacitor by-pass switches PUBLICLY AVAILABLE SPECIFICATION INTERNATIONAL ELECTROTECHNICAL
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 118 Lupton Avenue Leeds LS9 6ED Contact: Mr Scott Wiseman Tel: +44 (0)113 248 8830 Fax: +44 (0)113 248 0239 E-Mail: scott@hstts.co.uk Website:
More informationISO NORMAS PUBLICADAS JANEIRO E FEVEREIRO
ISO NORMAS PUBLICADAS JANEIRO E FEVEREIRO ISO/JTC 1 - Information technology ISO/IEC 9075-1:2016 - Information technology -- Database languages -- SQL -- Part 1: Framework (SQL/Framework) ISO/IEC 9075-2:2016
More informationAnnex of the certificate (Page 1/5) Accreditation Scope
Annex of the certificate (Page 1/5) Accreditation Scope As a Testing Laboratory Tested Materials / Products EX LABORATORY Metallic materials Construction products Address: Küçük Çiğli Mh. 8780/1 Sk. No:5
More information13799 Commerce Parkway Richmond, British Columbia V6V 2N9 Canada Benjamin Barker, Manager Accreditations
IAS Accreditation Number Company Name Address Contact Name Telephone (416) 747-4013 Effective Date of Scope May 22, 2017 Accreditation Standard ISO/IEC 17025:2005 TL-270 13799 Commerce Parkway Richmond,
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. January 2018
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC January 2018 Issued on : 16 February 2018 Page 1 Information Procedure on Standards Notifications
More informationUEE30811 Q-Tracker Work Tasks
UEE30811 Q-Tracker Work Tasks UEENEEC020B Participate in electrical work and competency development activities Q-Tracker requirements: 40 hours of practical training. 1. Comply with electrical industry/enterprise
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11035-03-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 25.10.2017 to 24.10.2022 Holder of certificate: DMT
More informationVydané medzinárodné normy a iné publikácie IEC za obdobie od do
Vydané medzinárodné normy a iné publikácie IEC za obdobie od 1. 7. 2015 do 31. 7. 2015 IEC TC/SC Dokument Dátum vydania Názov CIS/A CISPR 16-1-1:2015 PRV 2015-07-10 Specification for radio disturbance
More informationDevelopment of standards for MV Switchgear for Arc Flash protection. ABB Group May 20, 2013 Slide 1
Development of standards for MV Switchgear for Arc Flash protection May 20, 2013 Slide 1 Development of standards for MV Switchgear for Arc Flash protection Bryan Johnson ABB South Africa Shaping the world
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. August 2015
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC August 2015 Issued on 4 September 2015 Page 1 Information Procedure on Standards Notifications registered
More informationNr. Standard reference Title
Nr. Standard reference Title 1 CEN/TR 419040:2018 Rationalized structure for electronic signature standardization - Guidelines for citizens 2 CEN/TR 419030:2018 Rationalized structure for electronic signature
More informationThe following checklists are to be used during an aerodrome RFFS inspection/ audit.
The following checklists are to be used during an aerodrome RFFS inspection/ audit. a) Level of protection to be provided, as well as he level of back-up supplies required. Chapter 2 of Doc 9137-AN/898.
More informationInstitut pro testování a certifikaci, a.s. Management System Certification Body třída Tomáše Bati 299, Louky, Zlín
1 1 code 1) name 1) Limited to (CZ- Agriculture, hunting, forestry, fishing and aquaculture 01 except 01.7 01 01.6 02 EN EN EN EN EN EN Page 1 of 21 code 1) name 1) Limited to (CZ- 2 2 Mining and quarrying
More informationJust Published. Karl Ruling. 118 publications since Just Published Sent: Saturday, 01 December :39
Karl Ruling From: Just Published Sent: Saturday, 01 December 2012 14:39 To: Karl Ruling Subject: Just Published by the IEC - Edition 11-12 Just Published 118 publications since
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. September 2015
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC September 2015 Issued on : 2 October 2015 Page 1 Information Procedure on Standards Notifications
More informationRequirements for Electrical Installations
BRITISH STANDARD BS 7671:2018 Corrigendum (December 2018) Requirements for Electrical Installations IET Wiring Regulations Eighteenth Edition The Institution of Engineering and Technology and BSI NO COPYING
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. April 2018
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC April 2018 Issued on : 16 May 2018 Page 1 Information Procedure on Standards Notifications registered
More informationDIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC.
DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC September 2012 Issued on : 08 October 2012 Page 1 Directive 98/34/EC Information
More informationISO NORMAS PUBLICADAS. ISO/IEC TR : Information technology - Future Network - Problem statement and requirements - Part 5: Security.
ISO NORMAS PUBLICADAS ISO/IEC JTC 1 - Information technology ISO/IEC TR 29181-5:2014 - Information technology - Future Network - Problem statement and requirements - Part 5: Security. ISO/IEC TR 29181-2:2014
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2018/C 326/02)
C 326/4 EN Official Journal of the European Union 14.9.2018 Commission communication in the framework of the implementation of Directive 2014/35/EU of the European Parliament and of the Council on the
More informationTECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
DATE SANS SABS 0-09-0 Locks, latches, and associated furniture for doors (Domestic Type) 0.0 0-0- 0-0 9.060.50 SANS 9 07-0- The inspection, testing and examination of mobile cranes 06-05-7 096 SANS 58
More information(Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION
8.4.2016 EN Official Journal of the European Union C 126/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework
More informationHigh pressure cleaning heads cleanliness all around
High pressure cleaning heads cleanliness all around 2 3 Cleaning at the highest level Perfect internal cleaning of vessels with the URACA TWK system In industries such as the chemical, petrochemical, synthetics,
More informationISO INTERNATIONAL STANDARD. Hydrogen generators using fuel processing technologies Part 1: Safety
INTERNATIONAL STANDARD ISO 16110-1 First edition 2007-03-15 Hydrogen generators using fuel processing technologies Part 1: Safety Générateurs d'hydrogène utilisant les technologies de traitement du carburant
More informationC 319/6 Official Journal of the European Union
C 319/6 Official Journal of the European Union 5.11.2013 Commission communication in the framework of the implementation of the Directive 94/9/EC of the European Parliament and the Council of 23 March
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Presley House Presley Way Crownhill Milton Keynes MK8 0ES United Kingdom Contact: Jeremy Hodge Tel: +44 (0) 1908 267300 Fax: +44 (0) 1908
More informationLloyd s Register Type Approval System Test Specification Number 3
Working together for a safer world Lloyd s Register Type Approval System Test Specification Number 3 July 2015 Performance Test Specification for Equipment to be used in Marine Applications: Electric Cables
More informationThe Appendix is an integral part of Certificate of Accreditation No. 742/2017 of 14/12/2017
Field code 1) Field name 1) Limited to (CZ-NACE codes) 2) 1 1 Agriculture, hunting, forestry, fishing and aquaculture Specification of standards 01, 02, 03 2 2 Mining and quarrying 05, 06, 07, 08, 09 3
More information1.1 SECTION INCLUDES.1 Materials and installation for aboveground oil storage tanks..2 Section Waste Management and Disposal.
Page 1 of 8 PART 1 GENERAL 1.1 SECTION INCLUDES.1 Materials and installation for aboveground oil storage tanks. 1.2 RELATED SECTIONS.1 Section 01330 Submittal Procedures..2 Section 01355 Waste Management
More informationList of Harmonised Standards for EEE. Household and similar electrical appliances- Safety Part 1: General requirements
Updated on 13 November 2015 List of Harmonised Standards for EEE *or any newer edition No. Agreed edition* of IEC Standards for ASEAN Harmonization Standard Title Scope of Standard 1 IEC 60065 Ed.7.0(2001)
More informationTBT/W/45 GENERAL AGREEMENT ON. TARIFFS AND TRADE Special Distribution 47-48).
GENERAL AGREEMENT ON RESTRICTED TARIFFS AND TRADE Special Distribution Committee on Technical Barriers to Trade INFORMATION ON EXISTING INTERNATIONAL STANDARDS Note by the secretariat 1. At its meeting
More informationBTHA List of Safety Standards that may be applicable to Toys
BTHA List of Safety Standards that may be applicable to Toys BS / EN / ISO / CEN Standard Number Description Updated 08/07/2017 Toy Safety BS EN 62115:2005 + A11: 2012 Safety of Toys. Electrical Toys -
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. May 2017
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC May 2017 Issued on : 2 June 2017 Page 1 Information Procedure on Standards Notifications registered
More informationEQUIPMENT & MATERIALS REQUIRING DGMS APPROVAL SL.NO. EQUIPMENT PROVISION OF REGULATION STANDARD FOLLOWED BIS LICENSING
APPENDIX-I EQUIPMENT & MATERIALS REQUIRING DGMS APPROVAL SL.NO. EQUIPMENT PROVISION OF REGULATION STANDARD FOLLOWED BIS LICENSING CMR, MMR, OMR, MINE 1957 1961 1984 RESCUE 1. Flame Safety Lamp 2(2) 2(2)
More informationHG 675 CX 60 HG 675 CN 60 HG 675 CW 60
HG 675 X 60 HG 675 CX 60 HG 675 CN 60 HG 675 CW 60 1 2 1. : 93/68: 90/396: 2006/95/CE: 2004/108/CE: - 1935/2004:. 2002/95/CE: RoHS 2.,.,,,,...,. (,..)..,,.,. ( ),,, ;,,.,.....,.,,,,,,...,. (..),,.,..,.,,,,
More informationGASEOUS HYDROGEN SYSTEMS
CHAPTER 7 GASEOUS HYDROGEN SYSTEMS SECTION 701 GENERAL 701.1 Scope. The installation of gaseous hydrogen systems shall comply with this chapter and Chapters 30 and 35 of the Fire Compressed gases shall
More information2015 /9C EN-00 OSRAM GmbH Marcel-Breuer-Str München Germany. LED module PL-LIN-HV-DC-G1. M see attached list
Manufacturer's Declaration of Conformity with International Standards OSRAM fi Document number: Manufacturer or representative: Address: Brand name or trade mark: Product type: Product designation: OSRAM
More informationLow-voltage switchgear and controlgear - rated voltage does not exceed 1000V AC or 1500V DC
CLASS PROGRAMME Type approval DNVGL-CP-0396 Edition December 2015 Low-voltage switchgear and controlgear - rated voltage does not exceed 1000V AC or 1500V DC The electronic pdf version of this document,
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 126/02)
8.4.2016 EN Official Journal of the European Union C 126/13 Commission communication in the framework of the implementation of Directive 2014/34/EU of the European Parliament and of the Council on the
More informationรายช อเอกสารใหม (มกราคม-ม นาคม 2559)
ABSORPTION รายช อเอกสารใหม (มกราคม-ม นาคม 2559) 2812-3 2012 Paints and varnishes - Determination of resistance to liquids - P.3: Method using an absorbent medium/by International Organization for Standardization
More informationProducts Under Mandatory Certification HOUSEHOLD APPLIANCES. Philippine National Standard (PNS) No. PNS IEC :2015 (IEC published 2015)
Products Under Mandatory Certification HOUSEHOLD APPLIANCES 1 Electric fans PNS IEC 60335-2-80:2015 (IEC published 2015) similar electrical appliances Part 2 : Particular requirements for fans Plastic/Metal
More informationAustralian/New Zealand Standard
AS/NZS 60079.0:2012 IEC 60079-0, Ed. 6.0 (2011) AS/NZS 60079.0:2012 Australian/New Zealand Standard Explosive atmospheres Part 0: Equipment General requirements AS/NZS 60079.0:2012 This Joint Australian/New
More informationEMTAK code and name of service:
EMTAK code and name of service: 14131 Manufacture of other outerwear, inc custom tailoring 1511 Tanning and dressing of leather; dressing and dyeing of fur 1623 Manufacture of builder s carpentry and joinery
More informationTECHNICAL PROGRAMME SECTION A: WORK IN PROGRESS
INTERNATIONAL RELATNESS DATE SATS 0-0-0 Accreditation and supervision of collection societies in music industry 0-09-0 06-09 SANS SABS 00-- Locks, latches, and associated furniture for doors (Domestic
More information