Annex to the Accreditation Certificate D-IS according to DIN EN ISO/IEC 17020:2012
|
|
- Thomasine Leonard
- 6 years ago
- Views:
Transcription
1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-IS according to DIN EN ISO/IEC 17020:2012 Period of validity: to Holder of certificate: IMA Materialforschung und Anwendungstechnik GmbH Wilhelmine-Reichard-Ring 4, Dresden for its inspection body Type A at the location: Wilhelmine-Reichard-Ring 4, Dresden (BI 1) Am Lagerplatz 4, Dresden (BI 2) Inspections in the fields: Inspection of products, product groups and structural elements in the product fields vessels, profiles as well as pipes, pipe form elements, armatures and pipe systems from plastics, fibre plastics composites, plastics metal composites, metal and inspection of factory production control of products (vessels, profiles, pipes, pipe form elements, armatures and pipe systems from plastics, fibre plastics composite, plastics metal composites), metal, metallic product groups and structural elements in accordance with specifications and determination of their conformity with specific requirements and on the basis of professional judgment, general requirements Abbreviations used: see last page This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/8
2 Inspections according to inspection procedure QBI/ Work instruction of IMA Inspection body Standard operating procedure Inspections for examining products, factory production inspections as well as sampling at production location Inspections in the following fields are done in accordance with the specifications defined by the respective certification schemes, evaluation and basic normative documents 1. Plastics structural elements (BI 1) DIBt Building code of German states PÜZ List part IIa Serial no. 41.1/2 DIBt Building code of German states PÜZ List part IIa Serial no. 41.2/1 DIBt Building code of German states PÜZ List part IIa Serial no. 6.1/1, 6.1/3, 6.1/4 DIBt Building code of German states PÜZ List part IIa Serial no. 1.5/5 DIN EN DIN EN Vessels, containers and retaining devices as well as collecting pits without outlets made from thermosetting plastics; reaction resin, textiles reinforced materials 1 Coatings for container walls and deflection surfaces 1 Structural elements made of composite materials and glass fibre reinforced plastics1; structural elements made of thermoplastics1; reaction resin composite construction materials1 Textile reinforcements Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes Self-supporting double skin metal faced insulating panels Factory made products Specifications Period of validity: to Translation - 2/8
3 Quality regulations for sandwich elements and profiles EPAQ, DIN EN EAD Quality regulations of European Association for Panels and Profiles (PPA-Europe) for sandwich elements and cold formed profiles Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements Structural sections and decks made from fibre reinforced polymers (FRP/glass fibre composites); EOTA file No Pipes systems (BI 2) DIN DIN EN DIN EN DIN EN DIN EN DIN EN DIN CEN/TS DIN CEN/TS Pressure pipelines made from thermoplastics materials Metal and plastics compression fittings for polyethylene (PE) pipes District heating pipes Preinsulated bonded pipe systems for directly buried hot water networks Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes Copper and copper alloys - Plumbing fittings - Part 8: Fittings with press ends for use with plastics and multilayer pipes; Plastics piping systems for water supply, and for drainage and sewerage under pressure Polyethylene (PE) Part 5: Fitness for purpose of the system; Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) Part 5: Fitness for purpose of the system; Period of validity: to Translation - 3/8
4 DIN ISO/TS DIN CEN/TS 14632: ; DIN SPEC 19939: DIN ISO/TS DIN ISO/TS DIN ISO/TS DIN CEN IS0/TS DIN CEN ISO/TS DVGW CERT N-DE 01/2017 DVGW W DVGW W DVGW W DVGW W Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 7: Guidance for the assessment of conformity Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity;; Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE X).Part 7: Guidance for the assessment of conformity Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) -Part 7: Guidance for the assessment of conformity Plastics piping systems for hot and cold water installations Polyethylene of raised temperature resistance (PE-RT) Part 7: Guidance for the assessment of conformity Multilayer piping systems for hot and cold water installations inside buildings Part 7: Guidance for the assessment of conformity Rules of procedure for the certification of products in nonharmonised field Pipe connectors and pipe joints in drinking water installation Intrinsically safe apparatus for connection to the drinking water installation Multiple layer piping systems in drinking water installation Pipe connectors and connections in drinking installation Period of validity: to Translation - 4/8
5 DVGW W DVGW W DVGW W DVGW W DVGW W DVGW GW 335-A DVGW GW 335-A DVGW GW 335-B DVGW GW 335-B DVGW GW 335-B DVGW G DVGW G DVGW W Plastic pipes in drinking water installations Fittings for drinking water installation - Part 1: Requirements and tests for building fittings Fittings for drinking water installation - Part 2: Requirements and tests for safety valves Fittings in the drinking water installation - building and safety fittings and / or combinations in special designs for applications according to DIN EN 806 and DIN EN 1717 in conjunction with DIN 1988 Sampling Valves in Drinking Water Installations - Requirements and Tests requirements and testing part A1: PVC U pipes and fittings / components for water distribution requirements and testing Part A2: PE 80 and PE 100 requirements and testing part B2: PE 80 and PE 100 fittings requirements and testing part B3: mechanical connectors made from plastics (POM, PP) for water distribution part B4: fittings with metallic covering with mechanical or spigot and socket connectors for water distribution Permanent pipe joints for metal gas lines press connectors Metallic material intersection connector for polyethylene gas pipes Requirements and testing Section Sanitary valves as extraction fittings for drinking water installation Requirements and tests Period of validity: to Translation - 5/8
6 DVGW VP DVGW VP DIN Certco Certification program (ZP) DIN Certco Certification program (ZP) DIN Certco Certification program (ZP) DB Standard DBS SKZ-HR SKZ-HR SKZ-HR SKZ-HR SKZ-HR SKZ-HR INSTA-CERT INSTA SBC ISO Pressure pipes, fittings and pipe connections from glass fibre reinforced polyester resin (UP GF) for potable water pipelines requirements and testing PE Xb and PE Xc pipes Plastic pipes and systems for warm water surface heating and heating element connections Plastic pipe system (pressure pipes and fittings) Plastic pipe system (sewers and waste water pipes ) Plastic pipes and fittings for drainage in train facilities Heating pipes made of crosslinked polyethylene PE-X Heating pipes made of polyethylene Heating pipes made of HDPE/AL/HDPE-multilayer pipe Heating pipes made of crosslinked polyethylene of medium density PE-MDX Heating pipes made of polyethylene with raised temperature resistance Geothermal Probes, Pipes and Fittings made of Polyethylene, PE 100, for Geothermal Products General Rules for the services provided by INSTA-CERT Product certification (GRC) February 2012 Specific rules for Nordic certification in accordance with ISO Multilayer piping systems for hot and cold water installations inside buildings Period of validity: to Translation - 6/8
7 SVGW ZW 101 SVGW GW/TPG-TPW 101 d SVGW ZW SVGW ZW 110 SVGW ZW 125 SVGW ZW 129 SVGW ZW 142 KIWA BRL-K536 part D KIWA BRL-K536 part E KIWA BRL-K536 part G KIWA BRL-K774/ KIWA GASTEC QA KE 186 November 2012 Executive order No. 666 of 20 May 2015 GDV/ Version 2.0 of 22 May 2015 General terms and conditions of SVGW Certification body Water, SVGW ZertW Regulations for the SVGW approval of pipes and piping system parts of plastic for use in the gas and drinking water areas Waste fitting and Angled isolating valve Isolation valves Drinking water distribution systems with pipes made of PE-X Drinking water distribution systems with pipes made of PB Drinking water distribution systems with multilayer composite pipes Evaluation guideline for the Kiwa (technical approval with) product certificate for plastic piping systems of PE-X intended for transport of hot and cold drinking water Evaluation guideline for the Kiwa (technical approval with-) product certificate for plastic piping systems of PE-X /Al intended for transport of hot and cold drinking water Evaluation guideline for the Kiwa (technical approval with-) product certificate for plastic piping systems of PE-RT /Al intended for transport of hot and cold drinking water Evaluation guideline for the Kiwa product certificate for Compression fittings to tighten with matching clamping device Approval Requirements 186 for the GASTEC QA product certificate for press fittings for joining copper pipes Danish Ministry of Transport and Building (Issue of approvals for building components that come into contact with drinking water) Inspection guidelines for building components approved for drinking water Period of validity: to Translation - 7/8
8 Abbreviations used: BRL DBS DIBt DIN DIN Certco DVGW EN GASTEC QA GW/TPG-TPW GDV HR INSTA SBC ISO KIWA QBI SKZ SVGW Z ZP Beurteilungsrichtlinie (Specification for evaluation) Deutsche Bahn Standard Deutsches Institut für Bautechnik Competence Centre for Construction German Institute of Standardisation DIN CERTCO certification body for conformity assessment Deutsche Vereinigung des Gas- und Wasserfaches e.v. German Association of Gas and Waterworks European Standard Recognition specifications from KIWA SVGW Prüf- / Zertifizierungsreglement Godkent til Drikkevand (Denmark) Danish GDV scheme fee funded approval scheme for building components in contact with drinking water Testing and inspection requirements of SKZ Specific rules for Nordic certification International Organisation for Standardisation Formerly: Keurings instituut voor waterleiding Artikelen (Dutch Test Institute for drinking water articles) (Today: proper name) Quality management procedure of IMA-Dresden Süddeutsches Kunststoffzentrum - South German Plastics Centre Swiss Association of Gas and Waterworks Building code approval of DIBT Competence Centre for Construction Certification programme of DIN-Certco Period of validity: to Translation - 8/8
Scope of accreditation
WINS001 Plastics : fittings valves Dimensions : Wall thickness, diameter, angle, length EN ISO 3126 NBN T42-402 (1978) WINS002 Plastics Longitudinal reversion NBN EN ISO 2505 NBN EN 743 (1994) NBN T42-603
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 13244-7 August 2003 ICS 93.030 English version Plastics piping systems for buried and above-ground pressure systems for water
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12666-1:2006 Plastics piping systems for nonpressure sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system Plastics piping systems for non-pressure
More informationISO/TS TECHNICAL SPECIFICATION
Provläsningsexemplar / Preview TECHNICAL SPECIFICATION ISO/TS 22391-7 First edition 2011-11-15 Plastics piping systems for hot and cold water installations Polyethylene of raised temperature resistance
More informationGASTEC QA. Approval Requirements 200. for the GASTEC QA product certificate for fusion fittings and saddles made from Polyethylene (PE)
KE 200 March 2012 GASTEC QA Approval Requirements 200 for the GASTEC QA product certificate for fusion fittings and saddles made from Polyethylene (PE) Foreword These GASTEC QA Approval requirements have
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13121-2:2003 GRP paagid ja anumad kasutamiseks ülalpool maapinda. Osa 2: Komposiitmaterjalid. Keemiline vastupidavus GRP tanks and vessels for use above ground - Part 2: Composite
More informationGASTEC QA. Approval Requirements 6
KE 6 March 2012 GASTEC QA Approval Requirements 6 for the GASTEC QA product certificate for Plumbing fittings with ends for capillar soldering and/or thread connections Foreword These GASTEC QA Approval
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 17819 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 29.06.2017 to 10.08.2019 Holder of certificate: MPA
More informationAnnex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE-12007-01-06 according to DIN EN ISO/IEC 17065:2013 Holder of certificate: TÜV NORD CERT GmbH Langemarckstraße 20, 45141 Essen
More informationFINAL DRAFT FprEN
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM FINAL DRAFT FprEN 13476-2 November 2017 ICS 23.040.01; 93.030 Will supersede EN 13476-2:2007 English Version Plastics piping systems for non-pressure
More informationGASTEC QA. Approval Requirements 136
KE 136 January 2012 GASTEC QA Approval Requirements 136 for the GASTEC QA product certificate for Polyethylene (PE) valves for plastic piping systems for the supply of gaseous fuels Foreword These GASTEC
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11035-03-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 25.10.2017 to 24.10.2022 Holder of certificate: DMT
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11120-04-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 16.01.2018 to 15.01.2023 Holder of certificate: TÜV
More informationILNAS-EN :2018
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part
More informationGASTEC QA. Approval Requirements 15. for the GASTEC QA product certificate for Steel pipes and sockets for the transport of gas. KE 15 January 2012
KE 15 January 2012 GASTEC QA Approval Requirements 15 for the GASTEC QA product certificate for Steel pipes and sockets for the transport of gas Foreword These GASTEC QA Approval requirements have been
More informationNF MARK THERMOPLASTIC MATERIAL DRAIN OR SEWER SYSTEM OPERATING WITHOUT PRESSURE
Mandated by CENTRE SCIENTIFIQUE ET TECHNIQUE DU BATIMENT Certifying Body 84 avenue Jean Jaurès Champs sur Marne F 77442 MARNE-LA-VALLEE Cedex 2 rue Francis de Pressensé F 9357 LA PLAINE SAINT DENIS Cedex
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1555-7 January 2013 ICS 23.040.01; 91.140.40 Supersedes CEN/TS 1555-7:2003 English Version Plastics piping systems for the
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1401-2 May 2012 ICS 23.040.01; 93.030 Supersedes ENV 1401-2:2000 English Version Plastics piping systems for non-pressure
More informationISO INTERNATIONAL STANDARD. Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General
INTERNATIONAL STANDARD ISO 15875-1 First edition 2003-12-01 Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General Systèmes de canalisations en plastique
More informationEuropean Technical Assessment. ETA-11/0288 of 10 September English translation prepared by DIBt - Original version in German language
European Technical Assessment ETA-11/0288 of 10 September 2016 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the
More informationEuropean Technical Assessment. ETA-12/0605 of 4 May English translation prepared by DIBt - Original version in German language.
European Technical Assessment ETA-12/0605 of 4 May 2015 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1555-7 April 2003 ICS 23.040.01; 91.140.40 English version Plastics piping systems for the supply of gaseous fuels - Polyethylene
More informationBRL-K Evaluation Guideline
2016-10-06 for the Kiwa technical approval with product certificate for plastics piping systems for water supply with or without pressure Glass-reinforced thermosetting plastics (GRP) based on unsaturated
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 25762 First edition 2009-07-01 Plastics Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites Plastiques Lignes directrices
More informationEuropean Technical Assessment. ETA-14/0028 of 22 September General Part. Technical Assessment Body issuing the European Technical Assessment:
European Technical Assessment ETA-14/0028 of 22 September 2014 General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction product Product family to
More informationEuropean Technical Assessment. ETA-12/0166 of 18 June English translation prepared by DIBt - Original version in German language.
European Technical Assessment ETA-12/0166 of 18 June 2015 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationANTEC SUSTAINABILITY OF PVC (VINYL) PIPE: A COMPREHENSIVE ENVIRONMENTAL REVIEW. May 9, 2017
SUSTAINABILITY OF PVC (VINYL) PIPE: A COMPREHENSIVE ENVIRONMENTAL REVIEW ANTEC May 9, 2017 PRESENTED BY: Randel Dobbs, P.E., R.P.L.S. Regional Engineer SPE ANTEC Anaheim 2017 / 2556 THE PURPOSE OF THE
More informationEuropean Technical Assessment. ETA-09/0171 of 18 March English translation prepared by DIBt - Original version in German language.
European Technical Assessment ETA-09/0171 of 18 March 2016 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Deutsches Institut für
More informationHeating & Plumbing Pipes Europe 2013 Consumption of pipes by material and country
KWD Market + Charts Heating & Plumbing Pipes Europe 2013 Consumption of pipes by material and country Dipl.-Ing Jutta Hix Contents: Introduction Statistics: Country and Construction Information Market
More informationAccreditation Schedule
JOINT ACCREDITATION SYSTEM OF AUSTRALIA AND NEW ZEALAND HELPING MARKETS WORK BETTER AUSTRALIA FECCA House, 4 Phipps Close, Deakin, ACT 2600 PO Box 304, Deakin West, ACT 2605 P: +61 (0)2 6232 2000 NEW ZEALAND
More informationPlaströrsystem Rörsystem för vattendistribution. Plastics piping systems for water supply Polyethylene (PE) Part 2: Pipes
SVENSK STANDARD SS-EN 12201-2 Fastställd 2003-04-04 Utgåva 1 Plaströrsystem Rörsystem för vattendistribution PE (polyetylen) Del 2: Rör Plastics piping systems for water supply Polyethylene (PE) Part 2:
More informationBRL-K602. Datum Evaluation Guideline
Datum 2018-09-04 for the Kiwa product certificate for valves, control valves and non-return valves for drinking water transport and drinking water distribution systems Preface This evaluation guideline
More informationGASTEC QA. Approval Requirements 31-1
KE 31-1 March 2012 GASTEC QA Approval Requirements 31-1 for the GASTEC QA product certificate for Sealing materials for metallic threaded joints in contact with 2nd and 3rd family gases and hot water Part
More informationGASTEC QA. Approval Requirements 69-1
KE 69-1 May 2014 GASTEC QA Approval Requirements 69-1 for the GASTEC QA product certificate for Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings Foreword
More informationEuropean Technical Assessment. ETA-15/0440 of 6 July English translation prepared by DIBt - Original version in German language.
European Technical Assessment ETA-15/0440 of 6 July 2015 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
nnex to declaration accreditation (scope accreditation) egistration number: L 015 This annex is valid from: 01-08-2018 to 01-09-2020 eplaces annex dated: 21-03-2018 Location(s) where activities are performed
More informationUse of PE 100 supply pipes for the new construction of the BMW car factory in Leipzig. Wiesbadener Kunststoffrohrtage and 29 April 2004
Use of PE 100 supply pipes for the new construction of the BMW car factory in Leipzig Michael Müller-Ruff, graduate engineer, BMW Group, Munich Thomas Frank, graduate engineer, BMW Group, Mörfelden Wiesbadener
More informationTest Report No
TFI Charlottenburger Allee 41 52068 Aachen Germany Charlottenburger Allee 41 52068 Aachen Germany Egetaepper A/S Postfach 190 7400 Herning DÄNEMARK Fon +49.241.9679 00 Fax +49.241.9679 200 postmaster@tfi-online.de
More informationEuropean Technical Assessment. ETA-15/0771 of 14 December English translation prepared by DIBt - Original version in German language
European Technical Assessment ETA-15/0771 of 14 December 2015 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationBRL-K14026/ Evaluation Guideline. for the Kiwa product certificate for Extractable shower hoses for sanitary tapware
2017-05-12 for the Kiwa product certificate for Extractable shower hoses for sanitary tapware Preface This evaluation guideline has been accepted by the Kiwa Board of Experts Watercycle (CWK), in which
More informationESKOM SOLAR WATER HEATING PROGRAM
ESKOM SOLAR WATER HEATING PROGRAM Background Eskom requested the South African Bureau of Standards (SABS) to provide regulations for the installation of solar water heating units; that will serve as a
More informationAC100-PRO Ice. Stanley Black & Decker Deutschland GmbH Richard-Klinger-Straße Idstein DEUTSCHLAND
European Technical Assessment ETA-13/0258 of 10 May 2016 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationEuropean Technical Assessment. ETA-13/0651 of 18 June English translation prepared by DIBt - Original version in German language.
European Technical Assessment ETA-13/0651 of 18 June 2015 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationEuropean Technical Assessment. ETA-10/0352 of 6 July English translation prepared by DIBt - Original version in German language.
European Technical Assessment ETA-10/0352 of 6 July 2015 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationEvaluation Guideline. for the KOMO (technical approval-with-) product certificate for
6 January 2014 for the KOMO (technical approval-with-) product certificate for Pre-insulated flexible plastics piping systems for warm water distribution outside buildings Validated by the Board of Experts
More informationVYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 7. 2016 do 31. 7. 2016 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
More informationEuropean Technical Assessment. ETA-08/0315 of 15 May General Part. Technical Assessment Body issuing the European Technical Assessment:
European Technical Assessment ETA-08/0315 of 15 May 2014 General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction product Product family to which
More informationconcrete Indo Spark Constructions services 198 E Tararani Chowk Near Geeta mandir KOLHAPUR Maharastra INDIEN
European Technical Assessment ETA-17/0129 of 29 March 2017 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationEuropean Technical ETA-15/0270 Assessment of 2 February 2016 General Part
European Technical Assessment ETA-15/0270 of 2 February 2016 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationEuropean Technical Assessment. ETA-16/0958 of 11 April English translation prepared by DIBt - Original version in German language.
European Technical Assessment ETA-16/0958 of 11 April 2017 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationBRL-K774/ Evaluation guideline. for the Kiwa product certificate for Compression fittings to tighten with matching clamping device
01-02-2012 Evaluation guideline for the Kiwa product certificate for Compression fittings to tighten with matching clamping device Preface This evaluation guideline has been accepted by the board of experts
More informationGASTEC QA. Approval Requirements 31-2
KE 31-2 March 2012 GASTEC QA Approval Requirements 31-2 for the GASTEC QA product certificate for Sealing materials for metallic threaded joints in contact with 2nd and 3rd family gases and hot water Part
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 40-5:2002 Tänavavalgustuspostid. Osa 5: Nõuded terasest tänavavalgustuspostidele Lighting columns - Part 5: Requirements for steel lighting columns EESTI STANDARDIKESKUS EESTI STANDARDI
More informationTrade name of the construction product Fix Master Injection system Fit-Ve 200 for rebar connection. Karhutie 9 Fl NURMIJÄRVI FINNLAND
European Technical Assessment ETA-17/0445 of 1 June 2017 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Deutsches Institut für Bautechnik
More informationEuropean Technical Assessment. ETA-02/0024 of 17 June English translation prepared by DIBt - Original version in German language.
European Technical Assessment ETA-02/0024 of 17 June 2016 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationEuropean Technical Assessment. ETA-14/0030 of 26 June General Part. Technical Assessment Body issuing the European Technical Assessment:
European Technical Assessment ETA-14/0030 of 26 June 2014 General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction product Product family to which
More informationBRL-K762. Datum Concept design. Evaluation Guideline. for the Kiwa product certificate for steel pipes for the transport of drinking water
BRL-K762 Datum 2017-07-03 Concept design for the Kiwa product certificate for steel pipes for the transport of drinking water 478/160822 Preface This evaluation guideline has been accepted by the Kiwa
More informationBRL-K17401 Comments before.. Replaces BRL-K17401 d.d. 16 April Evaluation guideline
Comments before.. Replaces d.d. 16 April 2004 Evaluation guideline For the Kiwa (technical approval-with-) product certificate for District heating: flexible piping systems with plastic medium pipe for
More informationEuropean Technical Assessment. ETA-05/0120 of 14 February English translation prepared by DIBt - Original version in German language
European Technical Assessment ETA-05/0120 of 14 February 2017 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationEuropean Technical Assessment. ETA-16/0693 of 29 August English translation prepared by DIBt - Original version in German language.
European Technical Assessment ETA-16/0693 of 29 August 2016 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17819-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.08.2014 to 10.08.2019 Holder of certificate: MPA
More informationrebar connection Fosroc International Limited Drayton Manor Business Park Coles Road TAMWORTH STAFFORDSHIRE; B78 3XN GROSSBRITANNIEN
European Technical Assessment ETA-18/0587 of 12 July 2018 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationGASTEC QA. Evaluation Guideline KE 192. Amendment A1 Rubber materials for seals and diaphragms for gas appliances and gas equipment
KE 192 - A1 March 2012 GASTEC QA Evaluation Guideline KE 192 Amendment A1 Rubber materials for seals and diaphragms for gas appliances and gas equipment Foreword and introduction These GASTEC QA Approval
More informationTC 155 TIMES. E-net doc. 2014/6266. November 2014 BRIEFING FOR BPF-PPG MEMBERS
E-net doc. 2014/6266 November 2014 TC 155 TIMES BRIEFING FOR BPF-PPG MEMBERS Draft harmonised standards for thermoplastics pipes: comments being reviewed by Task Groups. Future of CE marking for plastic
More informationEuropean Technical Assessment. ETA-11/0240 of 7 May English translation prepared by DIBt - Original version in German language.
European Technical Assessment ETA-11/0240 of 7 May 2015 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationEuropean Technical Assessment. ETA-08/0314 of 8 August General Part. Technical Assessment Body issuing the European Technical Assessment:
European Technical Assessment ETA-08/0314 of 8 August 2014 General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction product Product family to which
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 054/02)
12.2.2016 EN Official Journal of the European Union C 54/9 Commission communication in the framework of the implementation of Regulation (EC) No 765/ 2008 of the European Parliament and of the Council
More informationEuropean Technical Assessment. ETA-14/0323 of 10 October General Part. Technical Assessment Body issuing the European Technical Assessment:
European Technical Assessment ETA-14/0323 of 10 October 2014 General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction product Product family to which
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17065:2012
SCOPE OF ACCREDITATION TO ISO/IEC 17065:2012 TEi-LISTING SERVICES 3455 S. 500 W. Salt Lake City, UT 84115 Mrs. Alona MacGregor (Authorized Representative) Phone: 801 262 1868 Email: alona@tei-test.com
More informationGASTEC QA. Evaluation Guideline KE 191. Amendment A1 Excess flow valves. KE A1 March 2012
KE 191 - A1 March 2012 GASTEC QA Evaluation Guideline KE 191 Amendment A1 Excess flow valves Foreword and introduction These GASTEC QA Approval requirements amendment have been accepted by the Board of
More informationJoint Stock Company Alzida Savanorių pr. 221, LT Vilnius, Lithuania
page 1 (13) Joint Stock Company Alzida Savanorių pr. 221, LT- 02300 Vilnius, Lithuania SCOPE OF ACCREDITATION (flexible) No. Name of the testing object Name of the parameters (characteristics) to be tested
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14889-2:2006 Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and
More informationApplication of DVGW Technical Rules in relation with European Standards
in relation with European Standards INOGATE Study Visit, 9 th to 11 th of May 2014 Dipl.-Ing. Detlef Jagodzinski, DVGW, Bonn Product Standardisation Standardisation committee Gastechnology (NAGas) of DIN.
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10289:2002 Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings Steel tubes and fittings for onshore and offshore
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14901:2006 Ductile iron pipes, fittings and accessories - Epoxy coating of ductile iron fittings and accessories (heavy duty) - Requirements and test methods Ductile iron pipes, fittings
More informationEuropean Technical ETA-11/0080 Assessment of 9 February 2016 General Part
European Technical Assessment ETA-11/0080 of 9 February 2016 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationEuropean Technical ETA-12/0607 Assessment of 18 January 2018 General Part
European Technical Assessment ETA-12/0607 of 18 January 2018 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationSanpress Inox G. Instructions for Use. Year built: from 02/2004 en_int
Sanpress Inox G Instructions for Use Year built: from 02/2004 en_int Sanpress Inox G 2 from 27 Table of contents Table of contents 1 About these instructions for use 4 1.1 Target groups 4 1.2 Labelling
More informationEuropean Technical Assessment. ETA-11/0492 of 26 June General Part. Technical Assessment Body issuing the European Technical Assessment:
European Technical Assessment ETA-11/0492 of 26 June 2014 General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction product Product family to which
More informationStanley Black & Decker Deutschland GmbH Richard-Klinger-Straße Idstein DEUTSCHLAND. Manufacturing plant Manufacturing Plant 4 and Plant 9
European Technical Assessment ETA-13/0407 of 9 February 2018 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 14541 February 2007 ICS 23.040.20; 23.040.45 English Version Plastics pipes and fittings for non-pressure applications -
More informationTrade name of the construction product Injection system Hilti HIT-HY 110. This version replaces ETA-13/1037 issued on 17 January 2014
European Technical Assessment ETA-13/1037 of 26 May 2014 General Part Technical Assessment Body issuing the European Technical Assessment: Deutsches Institut für Bautechnik Trade name of the construction
More informationEuropean Technical ETA-07/0025 Assessment of 9 December 2016 General Part
European Technical Assessment ETA-07/0025 of 9 December 2016 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationEESTI STANDARD EVS-EN :2009
EESTI STANDARD EVS-EN 1852-1:2009 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system EESTI STANDARDI
More informationBRL-K618/ Evaluation Guideline. for the Kiwa product certificate for Water meters
/08 2018-01-15 for the Kiwa product certificate for Water meters Preface This evaluation guideline has been accepted by the Kiwa Board of Experts Watercycle (CWK), in which all relevant parties in the
More informationfor concrete Apolo MEA Befestigungssysteme GmbH Industriestraße Aichbach DEUTSCHLAND Apolo MEA Befestigungssysteme GmbH, Plant2 Germany
European Technical Assessment ETA-10/0134 of 15 December 2016 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationEuropean Technical Assessment. ETA-16/0107 of 22 March English translation prepared by DIBt - Original version in German language.
European Technical Assessment ETA-16/0107 of 22 March 2016 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationBRL-K629/03. Date Evaluation Guideline. for the Kiwa product certificate for. Backflow protection devices. Family E, Types A, B, C and D
BRL-K629/03 Date 01-02-2012 Evaluation Guideline for the Kiwa product certificate for Backflow protection devices Family E, Types A, B, C and D Preface Kiwa This (BRL) has been drawn up by Kiwa's Board
More information(a) Flame shall not spread to the outer extremities of the sample on the 8 ft 12 ft (2440 mm 3660 mm) wall. Flashover shall not occur.
First Revision No. 1-NFPA 501-2015 [ Section No. 5.3.1.3 ] 5.3.1.3 The following conditions shall be met when an interior finish material is tested using the test protocol of NFPA 286, Standard Methods
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Exova (UK) Limited trading as Warrington Certification Issue No: 033 Issue date: 06 November 2017 to provide product conformity Holmesfield
More informationEuropean Technical ETA-07/0332 Assessment of 30 January 2015 General Part
European Technical Assessment ETA-07/0332 of 30 January 2015 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationCONTINUOUS GEOMEMBRANES FOR ON SITE APPLICATION. PDA Europe 2012 Annual Conference Istanbul, November
POLYMERIC GEOMEMBRANES ARE MADE OF: - POLYOLEOFINS (HDPE, LDPE, LLDPE, TPO, VLDPE). - EPDM. - PVC LIMITATIONS OF CONVENTIONAL POLYMERIC GEOMEMBRANES: - REQUIRE WELDING AT JOINTS AND SEAMS (heat or ultrasound).
More informationEuropean Technical Assessment. ETA-02/0020 of 11 December English translation prepared by DIBt - Original version in German language
European Technical Assessment ETA-02/0020 of 11 December 2014 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationEuropean Technical Assessment. ETA-13/0652 of 17 March English translation prepared by DIBt - Original version in German language.
European Technical Assessment ETA-13/0652 of 17 March 2017 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationΕ.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 127/2018 Αρ. 5087, Αριθμός 127 ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012
839 Ε.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 127/2018 Αρ. 5087, 11.5.2018 Αριθμός 127 ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012 Γλσζηνπνίεζε βάζεη ηνπ Άξζξνπ 5 ηνπ Βαζηθνύ Νόκνπ 156(Η)/2002
More informationEuropean Technical ETA-06/0078 Assessment of 21 January 2015 General Part
European Technical Assessment ETA-06/0078 of 21 January 2015 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More information1 WATERMARK CERTIFICATION SCHEME SCHEDULE OF PRODUCTS This document was adopted 1 August 2017 and replaced the WaterMark Schedule of Specifications
1 WATERMARK CERTIFICATION SCHEME SCHEDULE OF PRODUCTS This document was adopted 1 August 2017 and replaced the WaterMark Schedule of Specifications Product type Application Specification Appliances Bedpan
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2018/C 209/02)
C 209/12 EN Official Journal of the European Union 15.6.2018 Commission communication in the framework of the implementation of Regulation (EC) No 765/ 2008 of the European Parliament and of the Council,
More informationEuropean Technical Assessment. ETA-11/0360 of 6 October English translation prepared by DIBt - Original version in German language.
European Technical Assessment ETA-11/0360 of 6 October 2017 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationGovernment Gazette Staatskoerant
Government Gazette Staatskoerant REPUBLIC OF SOUTH AFRICA REPUBLIEK VAN SUID AFRIKA Regulation Gazette No. 10177 10701 Regulasiekoerant Regulation Gazette Vol. 621 24 March Maart 2017 No. 40713 PART 1
More information