General Price List #2015-1

Transcription

1 General Price List # Effective February 1, 2015 Supersedes # Dated February 1, 2013 Minimum Order Billing - $50.00 Net + Freight The Protectowire Company, Inc. 60 Washington Street Pembroke, MA USA Tel Fax AN ISO 9001:2008 REGISTERED COMPANY pg. 1

2 GENERAL PRICE LIST # SUPERSEDES # DATED 2/1/13 SECTION 1 PROTECTOWIRE LINEAR HEAT DETECTOR ALL MODELS Standard Packaging Standard packaging consists of 500 ft. (152m) coils and 3,280 ft. (1,000m) spools depending upon model ordered. In general, smaller lengths of 500 ft. or less will be on coils, and longer lengths on spools. The exact length of wire per spool used to complete each order is at the sole discretion of the Factory. Our policy is to send as few spools/coils as possible based upon stock availability. Custom Lengths We can provide custom cut continuous lengths up to 3,280 ft. (1,000m). Limitations may apply depending upon specific model ordered. ADDITIONAL CHARGES MAY APPLY. CONSULT FACTORY. Messenger Wire Models Messenger wire reduces the maximum length of Protectowire that can be accommodated on a standard spool. Types EPC-M, PLR-M, XCR-M, and XLT-M are limited to 2,500 ft. (762m) per spool. Less than 500 FT. Custom cut lengths MODEL NO. DESCRIPTION < 500 FT. (152m) (PRICES/FOOT) Type EPC ALL MODELS (TEMP.) $2.70 Type EPC-M ALL MODELS (TEMP.) on Msg. Wire $3.00 Type XLT PHSC-135-XLT $2.80 Type XLT-M PHSC-135-XLT-M $3.10 Type PLR-R ALL MODELS (TEMP.) $2.80 Type PLR-R-M ALL MODELS (TEMP.) on Msg. Wire $3.10 Type XCR ALL MODELS (TEMP.) $3.00 Type XCR-M ALL MODELS (TEMP.) on Msg. Wire $3.30 PRICES ARE PER FOOT 500-4,999 ft. 5,000 9,999 ft. 10,000 ft. + TYPE EPC CONSTRUCTION (VINYL JACKET) (152-1,523 m) (1,524 3,047 m) (3,048 m +) PHSC-155-EPC Protectowire, Type EPC (155 F / 68 C) $2.60 $2.40 $2.20 PHSC-155-EPC-M Protectowire, Type EPC on Msg. Wire $2.90 $2.70 $2.50 PHSC-190-EPC Protectowire, Type EPC (190 F / 88 C) $2.60 $2.40 $2.20 PHSC-190-EPC-M Protectowire, Type EPC on Msg. Wire $2.90 $2.70 $2.50 PHSC-220-EPC Protectowire, Type EPC (220 F / 105 C) $2.60 $2.40 $2.20 PHSC-220-EPC-M Protectowire, Type EPC on Msg. Wire $2.90 $2.70 $2.50 PHSC-280-EPC Protectowire, Type EPC (280 F / 138 C) $2.60 $2.40 $2.20 PHSC-280-EPC-M Protectowire, Type EPC on Msg. Wire $2.90 $2.70 $2.50 PHSC-356-EPC Protectowire, Type EPC (356 F / 180 C) $2.60 $2.40 $2.20 PHSC-356-EPC-M Protectowire, Type EPC on Msg. Wire $2.90 $2.70 $2.50 TYPE XCR CONSTRUCTION (FLUOROPOLYMER JACKET) PHSC-155-XCR Protectowire, Type XCR (155 F / 68 C) $2.90 $2.80 $2.60 PHSC-155-XCR-M Protectowire, Type XCR on Msg. Wire $3.20 $3.10 $2.90 PHSC-190-XCR Protectowire, Type XCR (190 F / 88 C) $2.90 $2.80 $2.60 PHSC-190-XCR-M Protectowire, Type XCR on Msg. Wire $3.20 $3.10 $2.90 PHSC-220-XCR Protectowire, Type XCR (220 F / 105 C) $2.90 $2.80 $2.60 PHSC-220-XCR-M Protectowire, Type XCR on Msg. Wire $3.20 $3.10 $2.90 PHSC-280-XCR Protectowire, Type XCR (280 F / 138 C) $2.90 $2.80 $2.60 PHSC-280-XCR-M Protectowire, Type XCR on Msg. Wire $3.20 $3.10 $2.90 PHSC-356-XCR Protectowire, Type XCR (356 F / 180 C) $2.90 $2.80 $2.60 PHSC-356-XCR-M Protectowire, Type XCR on Msg. Wire $3.20 $3.10 $2.90 TYPE XLT CONSTRUCTION (VINYL POLYMER JACKET) PHSC-135-XLT Protectowire, Type XLT (135 F / 57 C) $2.70 $2.50 $2.20 PHSC-135-XLT-M Protectowire, Type XLT on Msg. Wire $3.00 $2.80 $2.50 PLR TYPE R CONSTRUCTION (THERMOPLASTIC ELASTOMER JACKET) PLR-155R Protectowire Universal, Type R (155 F / 68 C) $2.70 $2.50 $2.30 PLR-155R-M Protectowire Universal, Type R on Msg. Wire $3.00 $2.80 $2.60 PLR-190R Protectowire Universal, Type R (190 F / 88 C) $2.70 $2.50 $2.30 PLR-190R-M Protectowire Universal, Type R on Msg. Wire $3.00 $2.80 $2.60 Rev. 9/16/15 PLR Added pg. 2

3 GENERAL PRICE LIST # SUPERSEDES # DATED 2/1/13 SECTION 2 SRP-4x4 FIRE ALARM/RELEASING CONTROL PANEL MODEL NO. DESCRIPTION UNIT PRICE SRP-4x4 4 Zone Fire Alarm/Releasing Control Panel $1, SRP-4x4M 4 Zone Fire Alarm/Releasing Control Panel w/alarm Location Meter $2, RB-4 Alarm Relay Board with (4) SPDT Relays (Field Installed) $ AM-91-2 Dual Class A Output Module (Field Installed) $ BATTERIES AND BATTERY CABINETS PS AH, 12V (2 req d) Internally Mounts in SRP ea./$64.00 PS AH, 6V (4 req d) requires G-.5 Battery Cabinet when used with Model SRP-4x4M ea./$52.00 PS AH, 12V (2 req d) requires E-.5 Battery Cabinet when used with all SRP models ea./$ G-.5 Battery Cabinet use with 12AH size batteries $ E-.5 Battery Cabinet use with 18AH + size batteries $ SECTION 3 ALARM INITIATING DEVICES 5600 SERIES LOW PROFILE HEAT DETECTORS RATE OF RISE & FIXED TEMPERATURE (REPLACES 600 SERIES) 5601P Low Profile, Rate of Rise & Fixed Temp. 135 F $ Low Profile, Rate of Rise & Fixed Temp. 194 F $ Low Profile, Fixed Temperature 135 F $ Low Profile, Fixed Temperature 194 F $26.00 RATE ANTICIPATION HEAT DETECTORS (302 SERIES) 302-ET-135 All Weather Vertical Mounting 135 F $ ET-194 All Weather Vertical Mounting 194 F $ Interior Vertical Mounting 135 F $ Interior Vertical Mounting 194 F $ AW-135 Moisture or Dust Proof, Vertical Mounting 135 F $ AW-194 Moisture or Dust Proof, Vertical Mounting 194 F $ EPM-135 Explosion Proof Screw Base, Vertical Mounting 135 F* $ EPM-194 Explosion Proof Screw Base, Vertical Mounting 194 F* $ AP-P Adapter Plate for 4 Box for Models 302, 302-AW & 302-ET Detectors $16.00 * ½ conduit threads. Mount on threaded hub cover of Killark series JL fixture or equal. SMOKE DETECTORS FOR USE WITH PROTECTOWIRE FIRESYSTEM CONTROL PANELS SLR-24 Photoelectric Type, head only $68.00 SLR-24H Combination Smoke/Heat Detector, head only $78.00 NS6-220 Smoke Detector Base $16.00 Duct type Smoke Detectors Prices Available on Request Note: Use only 6VDC remote lamps with NS Series smoke detectors. SHARPEYE FLAME DETECTORS (STAINLESS STEEL HOUSING, FM/CSA/IECEx APPROVED, EXCLUDES MOUNTING BRACKET) UV DETECTORS 40/40U Ultraviolet Detector w/manual Test $2, /40UB Ultraviolet Detector w/built-in-test $2, UV/IR DETECTORS 40/40L UV/IR Dual Spectrum Detector w/manual Test $3, /40LB UV/IR Dual Spectrum Detector w/built-in-test $3, /40L4 UV/IR w/manual Test (4.5um) for Hydrocarbon Fires $3, /40L4B UV/IR w/built-in-test (4.5um) for Hydrocarbon Fires $3, /40UFL Ultra Fast UV/IR w/built-in-test $3, IR DETECTORS 40/40I IR3 Triple Infrared Detector w/built-in-test $4, /40M Multi-Spectrum IR Detector w/built-in-test for Long Range Hydrocarbon & Hydrogen Fires NOT AVAILABLE W/ALUMINUM HOUSING OPTION $4, /40R Single IR Detector $3, DETECTOR OPTIONS SPECIAL ORDER ATEX/IECEx Approval Add suffix C to Detector Model Number N/C Aluminum Housing SPECIAL ORDER Available only on ATEX/IECEx Approved Detectors Deduct $ from Detector prices shown SPECIAL ORDER Calibration to 85 C (185 F) $ Note: For SharpEye Models not listed, consult factory. E-.5 Price Correction 6/11/15 pg. 3

4 GENERAL PRICE LIST # SUPERSEDES # DATED 2/1/13 SECTION 3 ALARM INITIATING DEVICES CONTINUED ACCESSORIES MODEL NO. DESCRIPTION UNIT PRICE 40/ Tilt Mount for SharpEye 40/40 Models STAINLESS STEEL $ Duct Mount ALL MODELS EXCEPT 40/40R $ Air Shield for 40/40 Series $ Weather Cover (Stainless Steel) $ USB/RS485 Converter Kit for PC/Laptop USB Port, incl. Software for 40/40 Series $ / Flame Simulator IR3 $7, / Flame Simulator UV/IR & UV $7, / Flame Simulator Single IR $7, / Flame Simulator Multi-IR $7, / IR Beam Collimator IR3 (For extended test range) $ / UV/IR Beam Collimator UV-UV/IR (For extended test range) $ Laser Pointer $ Pole Mount (Stainless Steel / U-Bolt) 2 inches $ Pole Mount (Stainless Steel / U-Bolt) 3 inches $ Note: For SharpEye Models not listed, consult factory EXPLOSION PROOF / WEATHERPROOF MANUAL FIRE ALARM STATION SGX-32 SERIES SGX-32SK2 Single Action, Explosion Proof / Weatherproof (NEMA-4X) Manual Station w/dpdt Switch & Back Box. UL Listed, FM Approved SGX-32SK1 Double Action, Explosion Proof / Weatherproof (NEMA-4X) Manual Station w/dpdt Switch & Back Box. UL Listed, FM Approved $ $ MANUAL FIRE ALARM STATION SG-42 SERIES (SINGLE & DUAL ACTION) SG-42SK2 Single Action, SPST w/o Back Box *$42.00 SG-42SK1 Dual Action, SPST w/o Back Box *$49.00 SG-42CXK2 Single Action, (2) SPDT w/o Back Box *$ SGB-32S Surface Back Box for SG-42 MODELS $16.00 SG-WP NEMA-3R Weatherproof Back Box for SG-42 Series (NOT FOR SGX) $58.00 SG-GR Acrylic Break Rods (pkg. of 12) $14.00 Note: ALL UNITS INCLUDE SEPARATE SYSTEM RELEASE LABEL FOR EXTINGUISHING APPLICATIONS. *Qty. Discount Single model purchase of 10 or more units: SK2=$36.00 ea.; SK1=$41.00 ea.; CXK2=$97.00 ea. SECTION 4 ALARM INDICATING DEVICES ANNUNCIATORS (INDOOR & WEATHERPROOF) CUSTOMIZED LED AND GRAPHIC ANNUNCIATORS CAN BE PROVIDED. CONSULT FACTORY FOR DETAILS AND PRICING. WEATHERPROOF STROBE SIGNAL RSSWP-2475W-FR Visual Strobe Signal 75 Cd, 24VDC (Indoor/Outdoor) $92.00 WPSBB-R Weatherproof Back Box, Surface Mount - USE W/RSSWP ONLY $22.00 ELECTRONIC SIGNAL / STROBE MT-12/24-R Multitone Electronic Signal (less back box) $42.00 MT W-FR Multitone Electronic Signal w/strobe, 24VDC 15/75 Cd (ADA, less back box Indoor Only) $ MTWP-2475W-FR Multitone Electronic Signal w/strobe, 24VDC 75Cd Suitable for outdoor use with appropriate back box $ IOB-R Indoor / Outdoor Back Box $22.00 POWERTONE AMPLIFIED SPEAKER ASHP-24SMR Amplified Speaker w/o Tone Card $ U-TC Universal Tone Card - produces (32) different tones $ MOTORIZED ALARM BELLS 24VDC, POLARIZED W/TERMINALS MBA Alarm Bell 24VDC Polarized $46.00 MBA Alarm Bell 24VDC Polarized $52.00 MBA Alarm Bell 24VDC Polarized $60.00 WBB Weatherproof Back Box w/gasket $22.00 BB Back Box (Red) $16.00 pg. 4

5 pg. 5 GENERAL PRICE LIST # SUPERSEDES # DATED 2/1/13 SECTION 5 INSTALLATION ACCESSORIES COMMERCIAL TYPE ZONE / END-OF-LINE JUNCTION BOXES MODEL NO. DESCRIPTION UNIT PRICE ZB-4-QC-MP Non-metallic Moisture Proof Box w/compression terminals. Note: Use as End-of-Line Box for SRP-4x4 to mount 8.2K resistors supplied with panel. $38.00 ELR-4-QC-MP Non-metallic Moisture Proof EOL Box w/4.7k Res. For FS2000 & 2600HD Options B & BB/NO TEST SWITCH $42.00 ELR-4A Non-metallic Moisture Proof EOL Box (TRI-Wire) / NO TEST SWITCH. For FS2000 & 2600HD Options C & CC $42.00 SR-502 Strain Relief Connector $10.00 SR-502-N Non-Metallic Strain Relief Connector $6.00 HEAVY DUTY TYPE ZONE / JUNCTION BOXES ZB-HD-4-QC (N4X) Fiberglass NEMA-4X Type JIC Enclosure w/compression terminals $ SR-502 Strain Relief Connector $10.00 SR-502-N Non-Metallic Strain Relief Connector $6.00 HEAVY DUTY END-OF-LINE JUNCTION BOX W/TEST SWITCH (SRP-4x4 & 2600HD SERIES OPTIONS A & AA) ELR-HD-1A-QC (N4X) End of Line Fiberglass NEMA-4X Enclosure w/test Switch & Comp. Terminals, 8.2K Resistor $ SR-502 Strain Relief Connector $10.00 SR-502-N Non-Metallic Strain Relief Connector $6.00 HEAVY DUTY END-OF-LINE JUNCTION BOX W/TEST SWITCH (FS2000 SERIES & 2600HD SERIES OPTIONS B, BB, C & CC) ELR-HD-4-QC (N4X) End of Line Fiberglass NEMA-4X Enclosure w/test Switch & Compression Terminals (4.7K Resistor) $ ELR-HD-4A-QC (N4X) End of Line NEMA-4X Enclosure for TRI-Wire w/double Throw Test Switch & Compression Terminals (4.7K Resistor) $ SR-502 Strain Relief Connector $10.00 SR-502-N Non-Metallic Strain Relief Connector $6.00 WIRING ACCESSORIES PWSC Splicing Connectors (10/pk, SFTS Sealant Recommended) pack/$12.00 PWSC-3 3 Pole Splicing Connectors for TRI-Wire, (10/pk, SFTS Sealant Recommended) pack/$12.00 PWS Splicing Sleeves (10/pk) pack/$14.00 PWSK-3 Field Serviceable Splicing Connector Kit (consists of RSC-3U & RKC-3U) $28.00 SFTS #2228 Tape Sealant for Splice Connectors (1 x 10 makes approx. 30 splices) rl/$18.00 PFL Flexible Leads pr/$20.00 #35 WHITE Splicing Tape, white rl/$11.00 #35 RED Splicing Tape, red rl/$11.00 #35 BLUE Splicing Tape, blue rl/$ Splicing Tape, black (low temp. tape recommended for freezer applications) rl/$11.00 FASTENERS GENERAL PURPOSE APPLICATIONS WAW-N Clips, Corner, Nylon (white) $0.44 WAW-P Clips, Corner, Polypropylene (clear) $0.44 OHS-1 Clips, Line (use w/type EPR, EPC, EPN & TRI Protectowire) $0.52 OHS-SS 304 Stainless Steel Line Clip w ¼ Hole (use w/all types) $2.10 BC-2 Beam Clamp Assembly (steel) $2.60 BC-3P Iron Zinc Plated Beam Clamp Assembly (w/polypropylene clip) $3.00 BC-3N Iron Zinc Plated Beam Clamp Assembly (w/nylon clip) $3.00 RMC-2 L-Bracket (Rim Seal Type) $3.60 RMC-3 Stainless L-Bracket (Rim Seal Type) $12.00 TR-5G Insulated Standoff $5.20 EMS-A-CO Cable Mount (requires Sikaflex adhesive) $1.60 PLT1S-CO Cable Tie (for EMS-A-CO) $0.90 SIKAFLEX-291 Industrial Adhesive (for EMS-A-CO mounts) $34.00 CABLE TRAY APPLICATIONS HPC-2 Mounting Clip (Single Piece) $2.10 CC-2N Mounting Clip Assembly $2.10 CC-2W Mounting Clip Assembly $2.10 CC-10N Mounting Clip Assembly $2.60 CC-10W Mounting Clip Assembly $2.60 CC-10N-S Mounting Clip Assembly w/screw & lock nut $3.20 CC-10W-S Mounting Clip Assembly w/screw & lock nut $3.20

6 GENERAL PRICE LIST # SUPERSEDES # DATED 2/1/13 SECTION 5 INSTALLATION ACCESSORIES CONTINUED SPRINKLER PIPE MOUNTING MODEL NO. DESCRIPTION UNIT PRICE PM-3A Pipe Mounting Straps Nylon (3/4 to 2 pipe) $0.94 PM-3B Pipe Mounting Straps Nylon (2-1/2 to 3-1/2 pipe) $1.30 PM-3C Pipe Mounting Straps Nylon (4 to 6 pipe) $6.00 MESSENGER WIRE APPLICATIONS TR-4A Eyebolt $2.10 TR-24 Turnbuckle $5.60 TR-4A-S 304 Stainless Eyebolt $6.00 TR-24-S 304 Stainless Turnbuckle w/aluminum Body $13.00 TEST EQUIPMENT MFL-92 Fault Locator System $ APL-90 Protectowire Alarm Point Locator Meter Adapter $ WIRE INSTALLATION SPL-1L Spare Installation Spool, 3,280 ft. (1,000 m) $20.00 SPL-2M Spare Installation Spool, 1,500 ft. (456 m) $15.00 SPL-1S Spare Installation Spool, 500 ft. (152 m) $12.00 SU-15 Wire Dispensing Reel for Coils $ NOTE: Length indicated is maximum recommended for standard models. Lengths will be less for Messenger Wire models. SECTION 6 GENERAL TERMS & CONDITIONS Minimum Order: The minimum order is $50.00 net plus freight charges. Payment Terms: Net 30 Days for customers with established credit and The Protectowire Company s Credit Department Approval. Credit cards also accepted. Invoices not paid within 30 days, may affect your credit standing with Protectowire and delay processing of future orders. All payments must be made in U.S. Dollars. FOB Point: Pembroke, Massachusetts. All shipments are made Ex Works with freight added to Invoice. Returns: No returns will be accepted without a return authorization. All Non-Warranty returns are subject to a minimum 20% Restocking Charge to cover the cost of handling, inspection, and repacking. Products once installed or placed into service are not subject to return or exchange. Packaging: All orders will be carefully packaged in accordance with standard commercial practice. Requests for ocean freight and special packaging can be accommodated for an additional charge. Consult Factory for details and cost. Special Order Items: The Protectowire Company reserves the right to require a non-refundable deposit before ordering or manufacturing any special order items. Special Order Items are non-returnable and will not be accepted for credit or exchange. Shipping Dates: The Protectowire Company provides an Order Acknowledgement with Estimated Ship Date of every order accepted and processed. All shipping estimates are approximate and are not guaranteed. Failure to ship by the estimated ship date will not be considered sufficient cause for cancellation or damages. Order expediting and special handling may be subject to additional charges. Consult Factory for pricing. All clerical errors are subject to correction. pg. 6

7 2600HD Series Price List # Effective February 1, 2015 Supersedes # Dated March 1, 2013 Minimum Order Billing - $50.00 Net + Freight The Protectowire Company, Inc. 60 Washington Street Pembroke, MA USA Tel Fax AN ISO 9001:2008 REGISTERED COMPANY

8 2600HD PRICE LIST # SUPERSEDES # DATED HD Control Panels are designed for use in industrial applications and are the system of choice when custom engineering is required to meet special customer requirements or specifications. Enclosures are NEMA-4 rated (weatherproof/dustproof). SECTION HD CONTROL UNIT Complete documentation and system engineering are included in the prices shown. Consult the Factory for availability and pricing on special modifications or options which do not appear in this Price List. Basic 2600HD Industrial Control Units include the following: Complete power management, adjustable battery charger with monitor, ground fault detection, lamp test, two independent Class A/B (Style Z or Y) alarm notification appliance circuits, trouble silence resound timer. NEMA-4 rated enclosures with heavy duty field terminal strips must be ordered separately. See Section 4. ENCLOSURE MODEL NO. MODULE SPACES DESCRIPTION UNIT PRICE 2600HD System Control Unit with Protectowire Alarm Point Location Meter $4, HD2 9.0 System Control Unit without Protectowire Alarm Point Location Meter $3, HD System Control Unit with PCLC Touch Screen Color Graphic Display, Alarm Location Meter and Automatic Zone Alarm Scanner. NOTE: This System requires Input Modules with I/O Interface. Special functions may require special programming. Consult factory for details and pricing. $9, SPECIFY SYSTEM CONTROL UNIT INPUT AND BACK-UP POWER OPTION GC VAC Power Input with Gel Cell Battery Back-up STANDARD GC VAC Power Input with Gel Cell Battery Back-up N/C UC1 4.0 Universal Primary & Back-up Power Input (120/240VAC or 120/250VDC) Uninterruptible Second Source Back-up Power required $1, SECTION HD SERIES OPTIONS Select system Option Code letter(s) and show quantity. Note module space(s) required by each option in the system enclosure. ENCLOSURE OPTION CODE MODULE SPACES DESCRIPTION UNIT PRICE A 2.0 Two (2) Zone Class A Detection Module (HD1 & HD2 Systems Only) $ AA 2.5 Two (2) Zone Class A Detection Module w/i/o Interface (Use w/2600hd3 Only) $1, B 2.0 Four (4) Zone Class B Detection Module (HD1 & HD2 Systems Only) $ BB 2.5 Four (4) Zone Class B Detection Module w/i/o Interface (Use w/2600hd3 Only) $1, C * 2.0 TRI-Wire Two (2) Zone Class B Detection Module (HD1 & HD2 Systems Only) $ CC * 2.5 TRI-Wire Two (2) Zone Class B Detection Module w/i/o Interface (Use w/2600hd3 Only) $1, D Zone Alarm Location Meter Scanner 1 $1, D Zone Alarm Location Meter Scanner 1 $2, D Zone Alarm Location Meter Scanner 1 $3, E 2.0 Four (4) Circuit Class B Switch Supervisory Module (HD1 & HD2 Systems Only) $ EE 2.5 Four (4) Circuit Class B Switch Supervisory Module w/i/o Interface (Use w/2600hd3 Only) $1, F 2.0 Two (2) Circuit Class A Switch Supervisory Module (HD1 & HD2 Systems Only) $ FF 2.5 Two (2) Circuit Class A Switch Supervisory Module w/i/o Interface (Use w/2600hd3 Only) $1, G (1 st Barrier) Intrinsic Safety Barriers Class B Detection/Supervisory Circuits Only 2 $ NOTE: TRI-Wire Zones Require (2) Barriers per Zone (Ea. Add l) 1.0 H 1.0 Two (2) Circuit Solenoid Monitor & Release Module, 24VDC $ HH 1.0 Two (2) Circuit Solenoid Monitor & Release Module, for Star D Valve 24VDC $ J 1.5 Two (2) Circuit Solenoid Monitor & Release Module w/relays $ for 120VAC Solenoids JJ 2.5 Two (2) Circuit Solenoid Monitor & Release Module w/relays $1, for 250VDC Solenoids K 1.0 Audible Extender Module (2 Circuits/Module, Class A/B) $ L ---- Built-in Alarm Indicating Sonalert $ M 1.0 Auxiliary DPDT Alarm Relay, VAC or 28VDC $ N 1.0 Auxiliary DPDT Trouble Relay, VAC or 28VDC $ P 1.0 HD 4 Pole Relay, Ratings to 600VAC and 240VDC $ Q 1.5 HD 6 Pole Relay, Ratings to 600VAC and 240VDC $ R 1.5 HD 8 Pole Relay, Ratings to 600VAC and 240VDC $ S 0.5 Time Delay Relay Solid State.6 to 60 Sec. $ T ---- External NEMA-4X Key Operated Switches (Consists of Lamp Test, $1, Alarm Silence, Trouble/Supervisory Silence & System Reset) U ---- Battery Charging Meters (DC Volt and Amp) $ V 1.5 Auxiliary FWR Power Supply (APS-1 w/transformer, 5 Amp Max.) $ W 2.0 Auxiliary Regulated Power Supply w/aps-1 Module, 7 Amp Max. $1, This option not available on 2600HD2 or HD3 Systems. 2 This option not available with system ground fault detection. *THIS ITEM DISCONTINUED APRIL 1, 2015 PAGE 1

9 2600HD PRICE LIST # SUPERSEDES # DATED SECTION HD CUSTOM OPTIONS ENCLOSURE OPTION CODE MODULE SPACES DESCRIPTION UNIT PRICE GP Copper Ground Pad (Enclosure Mounted) $ HT VAC Control Panel Heater Assembly $ HT VAC Control Panel Heater Assembly $ NOTE: Leg Kits are available for some enclosure models. Consult factory for size limitations and pricing. SPECIAL WIRING PACKAGE INCLUDES CROSS-LINKED POLYETHYLENE FLAME RETARDANT PANEL WIRING & NUMBERED WIRE MARKERS SWP Special Wiring Package for EHD4230 Enclosures $ SWP Special Wiring Package for EHD4236 Enclosures $1, SWP Special Wiring Package for EHD4836 Enclosures $1, SWP Special Wiring Package for EHD6036 Enclosures $2, SWP-X ---- Special Wiring Package for Custom Sized Enclosures Exceeding $3, Module Spaces SECTION 4 EHD SERIES ENCLOSURES To determine the proper size enclosure, it is necessary to calculate the total space required by all system components. Begin by adding the number of module spaces required by the basic control unit and power input option in Section 1, and for the quantity of each option selected in Section 2. The sum of these numbers equal the total space required by the system you have configured. Select an enclosure whose total space capacity exceeds this number. If the total module spaces required for the system exceed the size of the largest enclosure, a custom sized enclosure is required. Consult Factory. ENCLOSURE MODEL NO. MODULE SPACES DESCRIPTION UNIT PRICE EHD Industrial Type-NEMA-4 Rated Enclosure $3, EHD Industrial Type-NEMA-4 Rated Enclosure $3, EHD Industrial Type-NEMA-4 Rated Enclosure $3, EHD Industrial Type-NEMA-4 Rated Enclosure $4, Due to the custom design features of the 2600HD Series and the potential for system variations requiring ancillary devices not accounted for by standard factory options, all 2600HD system enclosures estimated and/or ordered using this information are considered preliminary and are subject to change upon final Factory review. SECTION 5 E2600HD SERIES EXTENDER PANELS The zone capacity and optional features of the 2600HD Control Panel can be expanded after installation by utilizing an E2600HD System Extender Panel. In its basic form, the extender panel provides additional detection zones only. On large and more complex systems, the Extender can be configured to duplicate many of the same options contained in the main 2600HD Control Panel. ENCLOSURE MODEL NO. MODULE SPACES DESCRIPTION UNIT PRICE E2600HD1 2 System Extender for 2600HD1 Control Panel containing a $2, Protectowire Alarm Point Location Meter E2600HD2 2 System Extender for 2600HD2 Control Panel without a $1, Protectowire Alarm Point Location Meter E2600HD3 2 System Extender for 2600HD3 Control Panel containing a $2, Touch Screen PCLC Graphic Display Select the Option Code Letter(s) from those listed in Section 2 and show quantity. Determine the size of the Extender s enclosure by calculating the space required by all system components. Finalize complete E2600HD Extender Model Number and total price. SECTION 6 BATTERIES AND BATTERY CABINETS GEL CELL (SEALED LEAD ACID) STOCK AVAILABILITY MODEL NO. DESCRIPTION UNIT PRICE PS AH, 12V (2 req d) ea./$64.00 PS AH, 6V (4 req d) ea./$52.00 G-.5 Battery Cabinet for 1270 & 6100 batteries $ PS AH, 12V (2 req d) ea./$ PS AH, 12V (2 req d) ea./$ PS AH, 12V (2 req d) ea./$ PS AH, 12V (2 req d) ea./$ E-.5 Battery cabinet for 12180, 12335, & batteries $ Refer to 2600HD Battery Calculation Sheet, or consult Factory to determine proper battery size required for your particular system. PAGE 2

10 2600HD PRICE LIST # SUPERSEDES # DATED SECTION 7 OPERATION & MAINTENANCE MANUALS / DRAWINGS Prices for the above described equipment include submittal drawings up to four (4) prints corrected to the customer s requirements. Drawings may be ed upon request. Three (3) Operation & Maintenance Manuals and three (3) sets of final as built prints will be provided when the equipment is completed. Additional Material: Extra Manuals ea./$ Extra Prints ea./$40.00 SECTION 8 GENERAL TERMS & CONDITIONS Minimum Order: The minimum order is $50.00 net plus freight charges. Payment Terms: Net 30 Days for customers with established credit and The Protectowire Company s Credit Department Approval. Credit cards also accepted. Invoices not paid within 30 days, may affect your credit standing with Protectowire and delay processing of future orders. All payments must be made in U.S. Dollars. FOB Point: Pembroke, Massachusetts. All shipments are made Ex Works with freight added to Invoice. Returns: No returns will be accepted without a return authorization. All Non-Warranty returns are subject to a minimum 20% Restocking Charge to cover the cost of handling, inspection, and repacking. Products once installed or placed into service are not subject to return or exchange. Packaging: All orders will be carefully packaged in accordance with standard commercial practice. Requests for ocean freight and special packaging can be accommodated for an additional charge. Consult Factory for details and cost. Special Order Items: The Protectowire Company reserves the right to require a non-refundable deposit before ordering or manufacturing any special order items. Special Order Items are non-returnable and will not be accepted for credit or exchange. Shipping Dates: The Protectowire Company provides an Order Acknowledgement with Estimated Ship Date of every order accepted and processed. All shipping estimates are approximate and are not guaranteed. Failure to ship by the estimated ship date will not be considered sufficient cause for cancellation or damages. Control Panel Order Cancellation: A charge will be applied to any formally acknowledged control panel order which is cancelled once engineering design and/or production has begun. The cancellation charge will include all charges incurred up to the date of cancellation. In all cases, the minimum cancellation charge shall be 20% of the net control panel price. Order expediting and special handling may be subject to additional charges. Consult Factory for pricing. All clerical errors are subject to correction. PAGE 3

11 FS2000 Series Price List # Effective February 1, 2015 Supersedes # Dated March 1, 2013 Minimum Order Billing - $50.00 Net + Freight The Protectowire Company, Inc. 60 Washington Street Pembroke, MA USA Tel Fax AN ISO 9001:2008 REGISTERED COMPANY

12 FS2000 PRICE LIST # SUPERSEDES # DATED 3/1/13 SECTION 1 FIRESYSTEM 2000 CONTROL UNIT SYSTEM CONTROL UNIT: Standard Units include main mother board with control card, Class A/B detection zone card(s) (except FS2000), two Class B audible circuits, ground fault detection, lamp test, and power supply with battery charger and monitor. ENCLOSURES MUST BE SIZED AND PRICED SEPARATELY. MODEL NO. ENCLOSURE MODULE SPACES DESCRIPTION UNIT PRICE FS2000 * 1/2 Basic Control Unit w/o Zone $1, Card (Requires Option X or XX) FS zones $1, FS /2 4 zones (1) $1, FS zones (1) $1, FS /2 8 zones (2) $2, FS zones (2) $2, FS /2 12 zones (3) $3, FS zones (3) $3, FS /2 16 zones (4) $3, FS zones (4) $4, FS /2 20 zones (5) $4, FS zones (5) $4, FS /2 24 zones (6) $5, FS zones (6) $5, FS /2 28 zones (7) $6, FS zones (7) $6, FS /2 32 zones (8) $6, FS zones (8) $6, FS /2 36 zones (9) $7, FS zones (9) $7, FS /2 40 zones (10) $8, FS zones (10) $8, FS /2 44 zones (11) $8, FS zones (11) $9, *THIS ITEM TO BE DISCONTINUED APRIL 1, 2015 SECTION SERIES OPTIONS Select Option Code letter and show quantity when necessary. Options which require enclosure module space(s) must be added to the module space required for the basic panel to determine final enclosure size. ENCLOSURE OPTION CODE MODULE SPACES DESCRIPTION UNIT PRICE A ---- PDM Protectowire Alarm Location Meter 2 zones $1, A PDM Protectowire Alarm Location Meter 4 zones $1, A PDM Protectowire Alarm Location Meter 6 zones $1, A PDM Protectowire Alarm Location Meter 8 zones $1, A PDM Protectowire Alarm Location Meter 10 zones $1, For systems larger than 10 zones, determine Option A price by adding meter switching charge to base option price. When ordering, state number of zones after option code letter as shown above. 1. Base option price $ Switching charge No. of metered Protectowire zones x $ Note: switching charge is based on even number zone increments only i.e. 12, 14, 16, etc. and must include all RS-1 Release Module (Option F) initiating circuits used as Protectowire detection zones. C 1 16 Zone alarm scanner requires Option A $1, C Zone alarm scanner requires Option A $2, C Zone alarm scanner requires Option A $3, D 1/2 Water Flow Detection Zones (2/card) $ E 1/2 Switch Supervisory Circuits Class A/B (2 circuits/card) $ F 1/2 Solenoid release module w/class B initiating circuit $ (1 release & 1 initiating circuit/module) PAGE 1

13 FS2000 PRICE LIST # SUPERSEDES # DATED 3/1/13 SECTION SERIES OPTIONS CONTINUED ENCLOSURE OPTION CODE MODULE SPACES DESCRIPTION UNIT PRICE H ---- Intrinsic safety barrier (Shunt Diode) for Class B detection ckts. $ (1-2 zones) 0 Disables system ground fault detection circuit. (3-16 zones) 1 Add qty. of zones required to option code letter and determine (17-32 zones) 2 module space based upon zone qty. shown in brackets. J * ---- Intrinsic safety barriers for Class B TRI-Wire det. ckts. (2/zone) $ (1 zone) 0 Disables system ground fault detection circuit. (2-8 zones) 1 Add qty. of zones required to option code letter and determine (9-16 zones) 2 module space based upon zone qty. shown in brackets. (17-24 zones) 3 K ---- Intrinsically safe dual channel DC Isolator for two (2) Class B detection ckts. $ (1-4 zones) 0 Not compatible with Meter Option A. Isolates det. ckt. from (5-32 zones) 1 system ground fault detector. Size restrictions limit use of Option K to LTi Systems Only. L ---- Auxiliary Zone Alarm Relay - SPDT $90.00 LL ---- Auxiliary Zone Alarm Relay - DPDT $ P ---- Battery Charging Meters $ Q ---- Time Delay Relay $ R ---- Auxiliary Common Alarm Relay - DPDT $ RR ---- Auxiliary Relay Module (8-SPDT Relays) $ S ---- Auxiliary Common Trouble Relay - DPDT $ T ---- Class A Audible Circuits (main panel, general alarm only) $ U 1/2 Alarm Expander Card (1 audible circuit, Class A or B) $ V ---- Zone Voting Module (ZV-91) $ W ---- Auxiliary Power Supply (PS-2) $ X * 1/2 Dual Temp. Class B Detection Zones (2/card) $ XX * 1/2 Dual Temp. Class A Detection Zone (1/card) $ Y ---- Power Conditioning Module (PS-95) $ Z ---- External NEMA-4X Key Operated System Control Switches - $ Alarm Silence, Trouble/Supv. Silence, Reset & Lamp Test. Not available with LTi2X Enclosure *OPTIONS J, X AND XX TO BE DISCONTINUED APRIL 1, 2015 SECTION 3 EN SERIES ENCLOSURES To determine the proper size enclosure, add the module spaces required for the basic control unit plus the module spaces required for the quantity of each option selected from the Option List. Select the enclosure from the sizes shown below. If total module space required for the system exceeds the size of the largest enclosure, a second extender enclosure will be required. Select two enclosures whose total module capacity equal or exceed that required for the system. MODEL NO. DESCRIPTION UNIT PRICE EN2 Two module enclosure (standard beige textured finish) $ EN4 Four module enclosure (standard beige textured finish) $ EN6 Six module enclosure (standard beige textured finish) $ EN9 Nine module enclosure (standard beige textured finish) $ EN12 Twelve module enclosure (standard beige textured finish) $1, EN2R Two module enclosure (red textured finish) $ EN4R Four module enclosure (red textured finish) $ EN6R Six module enclosure (red textured finish) $ EN9R Nine module enclosure (red textured finish) $ EN12R Twelve module enclosure (red textured finish) $1, LTi INDUSTRIAL ENCLOSURES LTi2X Two module Type 4X fiberglass enclosure (red) $ LTi4 Four module Type 4 heavy duty steel enclosure (red textured finish) $1, LTi6 Six module Type 4 heavy duty steel enclosure (red textured finish) $1, LTi9 Nine module Type 4 heavy duty steel enclosure (red textured finish) $1, NOTE: HEATERS REQUIRE ADDITIONAL MODULE SPACE CONSULT FACTORY HT-1 115VAC Control Panel Heater Assembly $ HT-2 230VAC Control Panel Heater Assembly $ PAGE 2

14 FS2000 PRICE LIST # SUPERSEDES # DATED 3/1/13 SECTION 4 BATTERIES AND BATTERY CABINETS GEL CELL (SEALED LEAD ACID) STOCK AVAILABILITY MODEL NO. DESCRIPTION UNIT PRICE PS AH, 12V (2 req d) ea./$64.00 PS AH, 6V (4 req d) ea./$52.00 PS AH, 12V (2 req d) Note: Fits EN4 or larger only ea./$ Battery Models shown above are designed for mounting inside the EN Series Enclosures. LTi enclosures require a separately ordered battery cabinet. Consult factory for information concerning enclosure venting for internal battery placement. The following batteries require a separately ordered battery cabinet: PS AH, 12V (2 req d) ea./$ PS AH, 12V (2 req d) ea./$ E-.5B Battery cabinet (textured beige) for & batteries $ E-.5 Battery cabinet (red) for & batteries $ Note: Refer to Gel Cell Battery Selection Data Sheet 8967B or consult factory to determine proper battery size for your particular system. SECTION 5 EXPANSION/REPLACEMENT MODULES All module orders must reference the original system s Drawing Number/PWC Job Number or Serial Number. Orders for EB-91 Expander Boards and RS-91 Release Modules must specify the module s connector gender (i.e. male/female) for proper placement within existing systems. EB and RS modules with suffix A are not gender specific. Orders received without this information cannot be processed. Consult the factory for assistance. MB-91 MB-91A* Main Master Board w/o Meter Interface $ MB-91M MB-91AM* Main Master Board w/meter Interface $ CC-91 CC-91A* Control Card w/test Feature (DISCONTINUED USE CC-91NT or ANT) CC-91NT CC-91ANT* Control Card w/o Test Feature $ CC-91I CC-91AI* Control Card w/isb Interface $ CC-91INT CC-1AINT* Control Card w/isb Interface & No Test $ ZC-91 ZC-91A* Class A/B Detection Zone Card (2 zones/card w/o meter interface) $ ZC-91M ZC-91AM* Class A/B Detection Zone Card (2 zones/card w/meter interface) $ ZC-95 3-Wire Dual Temp. Class B Zone Card (2 zones/card) $ ZC-95M 3-Wire Dual Temp. Class B Zone Card (2 zones/card w/meter interface) $ ZI-91 ZI-91A* Class B Detection Zone Card (2 zones/card w/isb interface) $ Zl-91M ZI-91AM* Class B Detection Zone Card (2 zones/card w/meter & ISB interface) $ ZI-91AW* Class B Water Flow Zone Card (2 zones/card w/isb interface) $ SC-91 SC-91A* Class A/B Supervisory Module (2 circuits/card) $ SC-91ANL* Class A/B Supervisory Module, non-latching (2 circuits/card) $ SC-91AI* Class B Supervisory Module (2 circuits/card w/isb interface) $ ZC-91W ZC-91AW* Class A/B Water Flow Zone Card (2 zones/card) $ EB-91 EB-91A* Expander Board accepts (2) plug-in zone cards (w/o meter interface) $ EB-91M EB-91AM* Expander Board accepts (2) plug-in zone cards (w/meter interface) $ RS-91 Solenoid Monitor & Release Module with Switch Supervisory $ (2 release & 2 supervisory circuits/module) RS-1* Solenoid Release/Initiating Device Card (1 release/1 Class B circuit/card) $ RS-91D Solenoid Monitor & Release Module for Star Model D with Switch Supervisory $ (2 release & 2 supervisory circuits/module) AE-91 Alarm Expander Card 1 audible circuit, Class A or B (SPECIFY LATCHING/NON-LATCHING) $ AM-91 Class A Audible Circuits (Option T) $ PS-91 Auxiliary Power Supply Less Transformer (Option W) $ SP * PS-2 Auxiliary Power Supply (Option W) $ ZV-91-2 Zone Voting Module activates on 2 inputs (Option V) $ ZV-91-3 Zone Voting Module activates on 3 inputs (Option V) $ PS-95 Power Conditioning Module (Option Y) $ RB-98 Relay Module 8-SPDT, 24VDC (Option RR) $ *Replacements for systems assembled after July 1, 2010 consult factory. MISCELLANEOUS PANEL LABELS CUSTOM ENGRAVED CONTROL PANEL LABELS (PRICES PER ORDER) One Label $40.00 Each Additional Label $6.00 SYSTEM MANUALS & DRAWINGS One manual and one internal wiring diagram is provided with each control panel. Additional copies are priced as follows: Operation & Maintenance Manual Internal Wiring Diagram (IWD) $40.00 ea. $30.00 ea. PAGE 3

15 FS2000 PRICE LIST # SUPERSEDES # DATED 3/1/13 SECTION 6 GENERAL TERMS & CONDITIONS Minimum Order: The minimum order is $50.00 net plus freight charges. Payment Terms: Net 30 Days for customers with established credit and The Protectowire Company s Credit Department Approval. Credit cards also accepted. Invoices not paid within 30 days, may affect your credit standing with Protectowire and delay processing of future orders. All payments must be made in U.S. Dollars. FOB Point: Pembroke, Massachusetts. All shipments are made Ex Works with freight added to Invoice. Returns: No returns will be accepted without a return authorization. All Non-Warranty returns are subject to a minimum 20% Restocking Charge to cover the cost of handling, inspection, and repacking. Products once installed or placed into service are not subject to return or exchange. Packaging: All orders will be carefully packaged in accordance with standard commercial practice. Requests for ocean freight and special packaging can be accommodated for an additional charge. Consult Factory for details and cost. Special Order Items: The Protectowire Company reserves the right to require a non-refundable deposit before ordering or manufacturing any special order items. Special Order Items are non-returnable and will not be accepted for credit or exchange. Shipping Dates: The Protectowire Company provides an Order Acknowledgement with Estimated Ship Date of every order accepted and processed. All shipping estimates are approximate and are not guaranteed. Failure to ship by the estimated ship date will not be considered sufficient cause for cancellation or damages. Control Panel Order Cancellation: A charge will be applied to any formally acknowledged control panel order which is cancelled once engineering design and/or production has begun. The cancellation charge will include all charges incurred up to the date of cancellation. In all cases, the minimum cancellation charge shall be 20% of the net control panel price. Order expediting and special handling may be subject to additional charges. Consult Factory for pricing. All clerical errors are subject to correction. PAGE 4