ISO NORMAS PUBLICADAS. ISO/IEC 10646: Information technology - Universal Coded Character Set (UCS).

Transcription

1 ISO NORMAS PUBLICADAS ISO/IEC JTC 1 - Information technology ISO/IEC 10646: Information technology - Universal Coded Character Set (UCS). ISO/IEC 24771: Information technology - Telecommunications and information exchange between systems - MAC/PHY standard for ad hoc wireless network to support QoS in an industrial work environment. ISO/IEC : Information technology - Procedures for the operation of object identifier registration authorities - Part 8: Generation of universally unique identifiers (UUIDs) and their use in object identifiers. ISO/IEC 19369: Information technology - Telecommunications and information exchange between systems - NFCIP-2 test methods. ISO/IEC : Information technology - Telecommunications and information exchange between systems - NFC Security - Part 1: NFC-SEC NFCIP-1 security services and protocol. ISO/IEC TR : Systems and software engineering - Lifecycle profiles for Very Small Entities (VSEs) - Part 5-6-2: Systems engineering - Management and engineering guide: Generic profile group: Basic profile. ISO/IEC 8484: Information technology - Magnetic stripes on savingsbooks. ISO/IEC :2013/Cor 1: Identification cards -- Integrated circuit cards -- Part 4: Organization, security and commands for interchange. ISO/IEC : Identification cards - Recording technique - Part 1: Embossing. ISO/IEC : Identification cards - Recording technique - Part 6: Magnetic stripe - High coercivity. ISO/IEC : Identification cards - Recording technique - Part 7: Magnetic stripe - High coercivity, high density. ISO/IEC : Identification cards - Recording technique - Part 2: Magnetic stripe - Low coercivity. ISO/IEC 24764:2010/Amd 1: Information technology - Generic cabling systems for data centres. ISO/IEC 19772:2009/Cor 1: Information technology - Security techniques - Authenticated encryption.

2 ISO/IEC :2010/Cor 2: Information technology - MPEG audio technologies - Part 2: Spatial Audio Object Coding (SAOC). ISO/IEC :2012/Amd 1: Information technology - Multimedia application format (MPEG-A) - Part 10: Surveillance application format. ISO/IEC : Information technology - Coding of audio-visual objects - Part 10: Advanced Video Coding. ISO/IEC : Information technology - Automatic identification and data capture techniques - Part 1: Security services for RFID air interfaces. ISO/IEC 26300:2006/Amd 1:2012/Cor 1: Information technology - Open Document Format for Office Applications (OpenDocument) v1.0 ISO/IEC 26300:2006/Cor 3: Information technology - Open Document Format for Office Applications (OpenDocument) v1.0 ISO/IEC :2011/Amd 1: Information technology - Learning, education and training - Metadata for learning resources - Part 1: Framework ISO/IEC :2005/Amd 1:2010/Cor 2: Information technology - Biometric data interchange formats - Part 2: Finger minutiae data. ISO/TC 4 - Rolling bearings ISO : Rolling bearings - Balls - Part 1: Steel balls. ISO : Rolling bearings - Balls - Part 2: Ceramic balls. ISO/TC 6 - Paper, board and pulps ISO : Paper and board - Accelerated ageing - Part 7: Exposure to light. ISO 2758: Paper - Determination of bursting strength. ISO/TC 20 - Aircraft and space vehicles ISO 21100: Air cargo unit load devices - Performance requirements and test parameters. ISO/TC 21 - Equipment for fire protection and fire fighting ISO : Fire detection and alarm systems - Part 28: Fire protection control equipment.

3 ISO/TC 22 - Road vehicles ISO/TS 18571: Road vehicles - Objective rating metric for non-ambiguous signals. ISO/TS : Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 2: Equipment and procedures. ISO/TC 29 - Small tools ISO : Polygonal taper interface with flange contact surface - Part 1: Dimensions and designation of shanks. ISO : Polygonal taper interface with flange contact surface - Part 2: Dimensions and designation of receivers. ISO : Tool holders with rectangular shank for indexable inserts - Part 2: Style A. ISO : Tool holders with rectangular shank for indexable inserts - Part 1: General survey, correlation and determination of dimensions. ISO : Tool holders with rectangular shank for indexable inserts - Part 3: Style B. ISO : Tool holders with rectangular shank for indexable inserts - Part 4: Style D. ISO : Tool holders with rectangular shank for indexable inserts - Part 6: Style G. ISO : Tool holders with rectangular shank for indexable inserts - Part 5: Style F. ISO : Tool holders with rectangular shank for indexable inserts - Part 7: Style J. ISO : Tool holders with rectangular shank for indexable inserts - Part 8: Style K. ISO : Tool holders with rectangular shank for indexable inserts - Part 9: Style L. ISO : Tool holders with rectangular shank for indexable inserts - Part 10: Style N. ISO : Tool holders with rectangular shank for indexable inserts - Part 11: Style R. ISO : Tool holders with rectangular shank for indexable inserts - Part 12: Style S. ISO : Tool holders with rectangular shank for indexable inserts - Part 13: Style T. ISO : Tool holders with rectangular shank for indexable inserts - Part 14: Style H. ISO : Tool holders with rectangular shank for indexable inserts - Part 15: Style V. ISO/TC 31 - Tyres, rims and valves

4 ISO : Bicycle tyres and rims - Part 1: Tyre designations and dimensions. ISO/TC 33 - Refractories ISO : Classification of dense shaped refractory products - Part 4: Special products. ISO/TC 34 - Food products ISO/TS 17383: Determination of the triacylglycerol composition of fats and oils - Determination by capillary gas chromatography. ISO 18301: Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air) - Oscillating U-tube method. ISO 22004: Food safety management systems - Guidance on the application of ISO ISO/TC 38 - Textiles ISO 18184: Textiles - Determination of antiviral activity of textile products. ISO 11092: Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test). ISO 105-B01: Textiles - Tests for colour fastness - Part B01: Colour fastness to light: Daylight. ISO 105-B02: Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test. ISO/TC 43 - Acoustics ISO : Acoustics - Soundscape - Part 1: Definition and conceptual framework. ISO/TC 44 - Welding and allied processes ISO 9453: Soft solder alloys - Chemical compositions and forms. ISO/TC 45 - Rubber and rubber products ISO 8330: Rubber and plastics hoses and hose assemblies - Vocabulary. ISO 3994: Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification.

5 ISO 8029: Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification. ISO 815-1: Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures. ISO/TC 46 - Information and documentation ISO : Information and documentation - RFID in libraries - Part 3: Fixed length encoding. ISO : Information and documentation - RFID in libraries - Part 1: Data elements and general guidelines for implementation. ISO : Information and documentation - RFID in libraries - Part 2: Encoding of RFID data elements based on rules from ISO/IEC ISO/TC 54 - Essential oils ISO 16385: Essential oil of molle (Schinus areira L.), Argentinean type. ISO/TC 58 - Gas cylinders ISO :2012/Amd 1: Gas cylinders - Refillable composite gas cylinders and tubes -- Design, construction and testing - Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners. ISO/TC 59 - Buildings and civil engineering works ISO/TR : Buildings and constructed assets - Service life planning - Part 11: Terminology. ISO/TC 60 - Gears ISO/TR : Calculation of micropitting load capacity of cylindrical spur and helical gears - Part 1: Introduction and basic principles. ISO/TC 61 - Plastics ISO 1887: Textile glass - Determination of combustible-matter content. ISO 10122: Reinforcement materials - Tubular braided sleeves - Basis for a specification.

6 ISO/TC 67 - Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ISO/TS : Well integrity - Part 2: Well integrity for the operational phase. ISO/TC 84 - Devices for administration of medicinal products and catheters ISO/TR 19244: Guidance on transition periods for standards developed by ISO/TC 84 - Devices for administration of medicinal products and catheters. ISO/TC 92 - Fire safety ISO : Fire tests - Calibration and use of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests. ISO/TR : External exposure of roofs to fire - Part 3: Commentary. ISO/TC 96 - Cranes ISO 16715: Cranes - Hand signals used with cranes. ISO 12482: Cranes - Monitoring for crane design working period. ISO/TC Dentistry ISO 15841: Dentistry - Wires for use in orthodontics. ISO/TC Mechanical vibration, shock and condition monitoring ISO :2012/Amd 1:2014 ISO/TC Powder metallurgy ISO 4490: Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter). ISO/TC Fluid power systems ISO 10766: Hydraulic fluid power - Cylinders - Housing dimensions for rectangular-sectioncut bearing rings for pistons and rods. ISO/TC Air quality

7 ISO : Air quality - Bulk materials - Part 2: Quantitative determination of asbestos by gravimetric and microscopical methods. ISO : Indoor air - Part 30: Sensory testing of indoor air. ISO/TC Implants for surgery ISO : Implants for surgery - Active implantable medical devices - Part 1: General requirements for safety, marking and for information to be provided by the manufacturer. ISO/TC Non-systemic contraceptives and STI barrier prophylactics ISO 4074: Natural rubber latex male condoms - Requirements and test methods. ISO/TC Ergonomics ISO 24504: Ergonomics - Accessible design - Sound pressure levels of spoken announcements for products and public address systems. ISO/TC Control and protective devices for gas and/or oil burners and appliances ISO : Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 6: Thermoelectric flame supervision controls. ISO/TC Optics and photonics ISO 10109: Optics and photonics - Guidance for the selection of environmental tests. ISO 15362: Stereomicroscopes - Information provided to the user. ISO : Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 1: Theory. ISO :2006/Amd 1: Ophthalmic implants - Intraocular lenses - Part 9: Multifocal intraocular lenses. ISO : Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods. ISO : Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations. ISO 13212: Ophthalmic optics - Contact lens care products - Guidelines for determination of shelf-life.

8 ISO/TC Lifts, escalators and moving walks ISO/TS 18870: Lifts (elevators) - Requirements for lifts used to assist in building evacuation. TCISO/TC Safety of toys ISO : Safety of toys - Part 6: Certain phthalate esters in toys and children's products. ISO : Safety of toys - Part 2: Flammability. ISO/TR : Safety of toys - Part 8: Age determination guidelines. ISO/TC Small craft ISO : Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kw and greater. ISO/TC Building construction machinery and equipment ISO : Building construction machinery and equipment - Concrete pumps - Part 1: Terminology and commercial specifications. ISO/TC Surface chemical analysis ISO 13095: Surface Chemical Analysis - Atomic force microscopy - Procedure for in situ characterization of AFM probe shank profile used for nanostructure measurement. ISO/TC Fine ceramics ISO 17947: Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of fine silicon nitride powders. ISO/TC Dimensional and geometrical product specifications and verification ISO : Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes. ISO : Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing.

9 ISO/TC Health informatics ISO/HL : Health informatics - HL7 version 3 - Reference information model - Release 4. ISO/TC Industrial furnaces and associated processing equipment ISO : Industrial furnace and associated processing equipment -- Safety -- Part 4: Protective systems. ISO/TC Safety of amusement rides and amusement devices ISO/TS 17929: Biomechanical effects on amusement ride passengers. ISO/TC Additive manufacturing ISO : Additive manufacturing - General principles - Part 4: Overview of data processing. ISO : Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods. ISO/PC Cross-border trade of second-hand goods ISO/TS 20245: Cross-border trade of second-hand goods.