Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods

Size: px
Start display at page:

Download "Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods"

Transcription

1 Irish Standard Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods CEN 2013 No copying without NSAI permission except as permitted by copyright law.

2 EN 716-2:2008/A1:2013 I.S. xxx: Irish Standard national specification based on the consensus of an expert panel and subject to public consultation. S.R. xxx: Standard Recommendation - recommendation based on the consensus of an expert panel and subject to public consultation. SWiFT xxx: A rapidly developed recommendatory document based on the consensus of the participants of an NSAI workshop. EN 716-2:2008 EN 716-2:2008+A1:2013 EN 716-2:2008 This document was published under the authority of the NSAI and comes into effect on: 31 January, January, March, Swift Square, Northwood, Santry Dublin 9 T F E standards@nsai.ie W T F W standards.ie Údarás um Chaighdeáin Náisiúnta na héireann

3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 716-2:2008+A1 January 2013 ICS Supersedes EN 716-2:2008 English Version Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods Meubles - Lits à nacelle fixes et pliants à usage domestique pour enfants - Partie 2 : Méthodes d'essai Möbel - Kinderbetten und Reisekinderbetten für den Wohnbereich - Teil 2: Prüfverfahren This European Standard was approved by CEN on 2 February 2008 and includes Amendment 1 approved by CEN on 17 November CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 716-2:2008+A1:2013: E

4 EN 716-2:2008+A1:2013 (E) Contents Page Foreword Scope Normative references General test conditions Preliminary preparation Test equipment Application of forces Tolerances Test sequence Prevention of movement during test Test apparatus Measuring probes Bottom impactor Test mattress Side impactor Loading pad Stops Floor surface Test chain and mass Small parts cylinder Test mass Bite tester Retaining block Foothold template Head probes Small head probe Large head probe Template for V-shaped openings Test dummy Test procedures Assembly and inspection !Stability - test" Footholds !Determination of a foothold" !Tests for footholds" !Measurement of distance between footholds and/or top of cot sides and ends" Measurements Holes, gaps and openings inside the cot Holes, gaps and openings on the outside of the cot Small parts General Torque test Tension test Bite test !Tests for cot base and mattress base" !Folding test of the mattress base and cot base" !Strength of cot base and mattress base (impact test)" Strength of sides and ends Static load test of!deleted text" slats (bending test)

5 EN 716-2:2008+A1:2013 (E) Strength of sides or side slats (impact test) Strength of corners (impact test) Strength of mesh and flexible sides and ends (static load test) Strength of frame and fastenings Vertical static load test Durability test Snag points Locking mechanisms Durability Strength Stability test Test report Annex A (informative)!a deviations" Bibliography

6 EN 716-2:2008+A1:2013 (E) Foreword This document (EN 716-2:2008+A1:2013) has been prepared by Technical Committee CEN/TC 207 Furniture, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the latest by July Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes!en 716-2:2008." This document includes Amendment 1 approved by CEN on 17 November The start and finish of text introduced or altered by amendment is indicated in the text by tags!". Significant technical differences between this edition and EN 716-2:1995 are as follows: a) Following items were made more concrete or introduced: Test equipment (3.2), Application of forces (3.3), Tolerances (3.4) and under Test equipment (4), Test mattress (4.3), Device for bite test (4.11), Template for foot hold (4.13), Head probes (4.14), Testing device for V-shaped openings (4.15) and Retaining block (4.12); b) Elaboration and specification of the test procedures (5), Assembly and inspection (5.1), for the measurements of closed openings testing with at test probe ( ) and measurement of V-shaped openings testing with a test probe ( ) were introduced, Small parts (5.4), Bite test (5.5), Strength of sides and ends (5.7), Snag points (5.9) and Locking mechanisms (5.11); c) Testing of brakes of the rollers and test chain with disc were deleted; d) Revised editorially and with regard to content. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. 4

7 This is a free preview. Purchase the entire publication at the link below: I.S. EN 716-2: PDF his is a free 6 page sample. Access the full version online. Looking for additional Standards? Visit SAI Global Infostore Learn about LexConnect, All Jurisdictions, Standards referenced in Australian legislation Need to speak with a Customer Service Representative - Contact Us

Founding - Magnetic particle testing

Founding - Magnetic particle testing Irish Standard Founding - Magnetic particle testing CEN 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus

More information

Office furniture - Office work chair - Part 2: Safety requirements

Office furniture - Office work chair - Part 2: Safety requirements Irish Standard Office furniture - Office work chair - Part 2: Safety requirements NSAI 2009 No copying without NSAI permission except as permitted by copyright law. EN 1335-2:2009 I.S. EN 1335-2:2000 EN

More information

Paper and board - Determination of grammage (ISO 536:2012)

Paper and board - Determination of grammage (ISO 536:2012) Irish Standard I.S. EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard

More information

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011) Irish Standard I.S. EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) NSAI 2011 No copying without NSAI permission except

More information

Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs

Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs Irish Standard I.S. EN 13906-1:2013 Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs CEN 2013 No copying without NSAI permission except as

More information

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) Irish Standard I.S. EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:

More information

Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation

Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation Irish Standard I.S. EN 12606-1:2015 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation CEN 2015 No copying without NSAI permission except as permitted

More information

Medical gloves for single use - Part 2: Requirements and testing for physical properties

Medical gloves for single use - Part 2: Requirements and testing for physical properties Irish Standard I.S. EN 455-2:2015 Medical gloves for single use - Part 2: Requirements and testing for physical properties CEN 2015 No copying without NSAI permission except as permitted by copyright law.

More information

Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler

Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler Irish Standard I.S. EN 12952-3:2011 Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler NSAI 2011 No copying without NSAI permission except

More information

Operation of electrical installations -- Part 1: General requirements

Operation of electrical installations -- Part 1: General requirements Irish Standard I.S. EN 50110-1:2013 Operation of electrical installations -- Part 1: General requirements CENELEC 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:

More information

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009)

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) Irish Standard I.S. EN ISO 10874:2012 Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) NSAI 2012 No copying without NSAI permission except as permitted by copyright law.

More information

High-voltage switchgear and controlgear -- Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kv (IEC :2011 (EQV))

High-voltage switchgear and controlgear -- Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kv (IEC :2011 (EQV)) Irish Standard I.S. EN 62271-203:2012 High-voltage switchgear and controlgear -- Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kv (IEC 62271-203:2011 (EQV)) NSAI 2012 No

More information

Gas meters - Additional functionalities

Gas meters - Additional functionalities Irish Standard Gas meters - Additional functionalities CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus

More information

Camping tents (ISO 5912:2011)

Camping tents (ISO 5912:2011) Irish Standard I.S. EN ISO 5912:2011 Camping tents (ISO 5912:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based

More information

Irish Standard I.S. EN :2009

Irish Standard I.S. EN :2009 Irish Standard NSAI 2009 No copying without NSAI permission except as permitted by copyright law. Incorporating amendments/corrigenda issued since publication: This document is based on: This document

More information

Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations

Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations Irish Standard I.S. EN 9101:2011 Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations NSAI 2011 No copying without NSAI permission except as permitted by copyright

More information

Aerospace series - Quality systems - First article inspection requirements

Aerospace series - Quality systems - First article inspection requirements Irish Standard I.S. EN 9102:2015 Aerospace series - Quality systems - First article inspection requirements CEN 2016 No copying without NSAI permission except as permitted by copyright law. I.S. EN 9102:2015

More information

Irish Standard I.S. EN :2011

Irish Standard I.S. EN :2011 Irish Standard Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified) NSAI 2011 No copying

More information

Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems

Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems Irish Standard I.S. EN 50159:2010 Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems NSAI 2010 No copying without NSAI permission

More information

Metallic materials - Calibration of forceproving instruments used for the verification of uniaxial testing machines (ISO 376:2011)

Metallic materials - Calibration of forceproving instruments used for the verification of uniaxial testing machines (ISO 376:2011) Irish Standard I.S. EN ISO 376:2011 Metallic materials - Calibration of forceproving instruments used for the verification of uniaxial testing machines (ISO 376:2011) NSAI 2011 No copying without NSAI

More information

HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO 10664:2005) IRISH STANDARD I.S. EN ISO 10664:2005. Price Code

HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO 10664:2005) IRISH STANDARD I.S. EN ISO 10664:2005. Price Code IRISH STANDARD I.S. EN ISO 10664:2005 ICS 21.060.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO Tel: +353 1 807 3800

More information

Bitumen and bituminous binders - Specifications for paving grade bitumens

Bitumen and bituminous binders - Specifications for paving grade bitumens Irish Standard I.S. EN 12591:2009 Bitumen and bituminous binders - Specifications for paving grade bitumens NSAI 2009 No copying without NSAI permission except as permitted by copyright law. EN 12591:2009

More information

Foodstuffs - Determination of vitamin C by HPLC

Foodstuffs - Determination of vitamin C by HPLC Irish Standard I.S. EN 14130:2003 Foodstuffs - Determination of vitamin C by HPLC NSAI 2003 No copying without NSAI permission except as permitted by copyright law. This document was published under the

More information

Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011)

Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) Irish Standard Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) NSAI 2011 No copying without NSAI permission except as permitted

More information

Irish Standard Recommendation S.R. CEN/TS 115-4:2015

Irish Standard Recommendation S.R. CEN/TS 115-4:2015 Irish Standard Recommendation S.R. CEN/TS 115-4:2015 Safety of escalators and moving walks - Part 4: Interpretations related to EN 115 family of standards CEN 2015 No copying without NSAI permission except

More information

Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012)

Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012) Irish Standard I.S. EN ISO 2919:2014 Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012) CEN 2014 No copying without NSAI permission except as

More information

Permanently installed outdoor fitness equipment - Safety requirements and test methods

Permanently installed outdoor fitness equipment - Safety requirements and test methods Irish Standard I.S. EN 16630:2015 Permanently installed outdoor fitness equipment - Safety requirements and test methods CEN 2015 No copying without NSAI permission except as permitted by copyright law.

More information

LABORATORY GLASSWARE - GRADUATED MEASURING CYLINDERS (ISO 4788:2005) IRISH STANDARD I.S. EN ISO 4788:2005. Price Code

LABORATORY GLASSWARE - GRADUATED MEASURING CYLINDERS (ISO 4788:2005) IRISH STANDARD I.S. EN ISO 4788:2005. Price Code IRISH STANDARD I.S. EN ISO 4788:2005 ICS 17.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie LABORATORY GLASSWARE - GRADUATED

More information

Petroleum, petrochemical and natural gas industries - Hairpin-type heat exchangers (ISO 12212:2012)

Petroleum, petrochemical and natural gas industries - Hairpin-type heat exchangers (ISO 12212:2012) Irish Standard I.S. EN ISO 12212:2012 Petroleum, petrochemical and natural gas industries - Hairpin-type heat exchangers (ISO 12212:2012) NSAI 2012 No copying without NSAI permission except as permitted

More information

Stationary training equipment - Part 1: General safety requirements and test methods (ISO :2013)

Stationary training equipment - Part 1: General safety requirements and test methods (ISO :2013) Irish Standard I.S. EN ISO 20957-1:2013 Stationary training equipment - Part 1: General safety requirements and test methods (ISO 20957-1:2013) CEN 2013 No copying without NSAI permission except as permitted

More information

Temporary structure - Tents - Safety

Temporary structure - Tents - Safety Irish Standard I.S. EN 13782:2015 Temporary structure - Tents - Safety CEN 2015 No copying without NSAI permission except as permitted by copyright law. I.S. EN 13782:2015 Incorporating amendments/corrigenda/national

More information

Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)

Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) Irish Standard I.S. EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) CEN 2015 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:

More information

Plastic containers for intravenous injections (ISO 15747:2010)

Plastic containers for intravenous injections (ISO 15747:2010) Irish Standard Plastic containers for intravenous injections (ISO 15747:2010) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification

More information

COMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: PHYSICAL AND LINK LAYER IRISH STANDARD I.S. EN :

COMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: PHYSICAL AND LINK LAYER IRISH STANDARD I.S. EN : IRISH STANDARD I.S. EN 13757-2:2005 ICS 33.200 35.100.10 35.100.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland COMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: Tel:

More information

CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: VISUAL METHOD (ISO :2004) IRISH STANDARD I.S. EN ISO :2005

CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: VISUAL METHOD (ISO :2004) IRISH STANDARD I.S. EN ISO :2005 IRISH STANDARD I.S. EN ISO 4630-1:2005 ICS 87.060.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: Tel:

More information

Irish Standard I.S. EN ISO :2013

Irish Standard I.S. EN ISO :2013 Irish Standard I.S. EN ISO 14253-1:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity

More information

Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO (ISO :2009)

Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO (ISO :2009) Standard Recommendation S.R. CEN ISO/TS 17665-2:2009 Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 (ISO 17665-2:2009) NSAI 2009 No copying without

More information

Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO :2010)

Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO :2010) Irish Standard I.S. EN ISO 11298-3:2011 Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2010) NSAI 2011 No copying without

More information

Sýnishorn Windows and doors - Watertightness - Test method

Sýnishorn Windows and doors - Watertightness - Test method ÍST EN 1027:2016 Gildistaka 25.9.2016 ICS: 91.06 Windows and doors - Watertightness - Test method Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-29889-0 Edition 1 EN 572-6:2012 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass This national standard is

More information

BIOLOGICAL EVALUATION OF MEDICAL

BIOLOGICAL EVALUATION OF MEDICAL IRISH STANDARD I.S. EN ISO 10933-12:2007 ICS 11.100.20 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353

More information

Fasteners - Hexagon head screws - Product

Fasteners - Hexagon head screws - Product Irish Standard I.S. EN ISO 4017:2014 Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) CEN 2014 No copying without NSAI permission except as permitted by copyright law. I.S. EN ISO

More information

PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001) IRISH STANDARD I.S. EN ISO 2758:2003. Price Code

PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001) IRISH STANDARD I.S. EN ISO 2758:2003. Price Code IRISH STANDARD I.S. EN ISO 2758:2003 ICS 85.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie PAPER - DETERMINATION OF

More information

General requirements for establishing anthropometric databases (ISO 15535:2012)

General requirements for establishing anthropometric databases (ISO 15535:2012) Irish Standard I.S. EN ISO 15535:2012 General requirements for establishing anthropometric databases (ISO 15535:2012) CEN 2012 No copying without NSAI permission except as permitted by copyright law. The

More information

Needle-based injection systems for medical use - Requirements and test methods - Part 2: Needles (ISO :2012)

Needle-based injection systems for medical use - Requirements and test methods - Part 2: Needles (ISO :2012) Irish Standard I.S. EN ISO 11608-2:2012 Needle-based injection systems for medical use - Requirements and test methods - Part 2: Needles (ISO 11608-2:2012) NSAI 2012 No copying without NSAI permission

More information

ELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) IRISH STANDARD I.S. EN 62382:2007. Price Code

ELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) IRISH STANDARD I.S. EN 62382:2007. Price Code IRISH STANDARD I.S. EN 62382:2007 ICS 25.040.01 ELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800

More information

Personal protective equipment - Test methods for footwear (ISO 20344:2011)

Personal protective equipment - Test methods for footwear (ISO 20344:2011) Irish Standard Personal protective equipment - Test methods for footwear (ISO 20344:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national

More information

REFRIGERATING SYSTEMS AND HEAT

REFRIGERATING SYSTEMS AND HEAT IRISH STANDARD I.S. EN 378-2:2008 ICS 27.200 27.080 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie REFRIGERATING SYSTEMS

More information

Personal protective equipment - Safety footwear (ISO 20345:2011)

Personal protective equipment - Safety footwear (ISO 20345:2011) Irish Standard Personal protective equipment - Safety footwear (ISO 20345:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification

More information

CONFORMITY ASSESSMENT - SUPPLIER'S

CONFORMITY ASSESSMENT - SUPPLIER'S STANDARD I.S. EN ISO/IEC 17050-2:2004 ICS 03.120.20 National Standards Authority of Ireland Dublin 9 Ireland CONFORMITY ASSESSMENT - SUPPLIER'S Tel: (01) 807 3800 Fax: (01) 807 3838 DECLARATION OF CONFORMITY

More information

Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines

Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines Irish Standard I.S. EN 1870-12:2013 Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines CEN 2013 No copying without NSAI permission except as permitted

More information

Irish Standard I.S. EN 378-1:2008+A2:2012

Irish Standard I.S. EN 378-1:2008+A2:2012 Irish Standard I.S. EN 378-1:2008+A2:2012 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria NSAI

More information

Safety of toys - Part 2: Flammability

Safety of toys - Part 2: Flammability Irish Standard I.S. EN 71-2:2011+A1:2014 Safety of toys - Part 2: Flammability CEN 2014 No copying without NSAI permission except as permitted by copyright law. I.S. EN 71-2:2011+A1:2014 Incorporating

More information

DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann IRISH STANDARD I.S. EN 15102:2007 ICS 91.180 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie DECORATIVE WALLCOVERINGS -

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 716-2:2008+A1:2013 Mööbel. Kodused lastevoodid ja laste klappvoodid. Osa 2: Katsemeetodid Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods EESTI

More information

Dentistry - Powered scaler (ISO 18397:2016)

Dentistry - Powered scaler (ISO 18397:2016) Irish Standard I.S. EN ISO 18397:2016 Dentistry - Powered scaler (ISO 18397:2016) CEN 2016 No copying without NSAI permission except as permitted by copyright law. I.S. EN ISO 18397:2016 Incorporating

More information

PACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code

PACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code STANDARD I.S. EN 13430:2004 ICS 13.030.50 55.020 National Standards Authority of Ireland Dublin 9 Ireland PACKAGING - REQUIREMENTS FOR Tel: (01) 807 3800 Fax: (01) 807 3838 PACKAGING RECOVERABLE BY MATERIAL

More information

PISTON-OPERATED VOLUMETRIC

PISTON-OPERATED VOLUMETRIC IRISH STANDARD I.S. EN ISO 8655-7:2005 ICS 17.060 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 7: NON-GRAVIMETRIC METHODS FOR THE ASSESSMENT OF National Standards Authority of Ireland Glasnevin, Dublin

More information

Framework for a specification on the avoidance of a damaging Alkali-Silica Reaction (ASR) in concrete

Framework for a specification on the avoidance of a damaging Alkali-Silica Reaction (ASR) in concrete Standard Recommendation Framework for a specification on the avoidance of a damaging Alkali-Silica Reaction (ASR) in concrete NSAI 2012 No copying without NSAI permission except as permitted by copyright

More information

Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kv - Part 1: General requirements

Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kv - Part 1: General requirements Irish Standard I.S. EN 50588-1:2015&A1:2016 Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kv - Part 1: General requirements CENELEC 2016 No copying without NSAI permission

More information

Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment structures

Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment structures Irish Standard I.S. EN 1992-3:2006 Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment structures NSAI 2006 No copying without NSAI permission except as permitted by copyright

More information

Sýnishorn Maintenance - Qualification of maintenance personnel

Sýnishorn Maintenance - Qualification of maintenance personnel ÍST EN 15628:2014 Gildistaka 20.11.2014 ICS: 3.08 Maintenance - Qualification of maintenance personnel Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD

More information

Energy management systems - Requirements with guidance for use (ISO 50001:2011)

Energy management systems - Requirements with guidance for use (ISO 50001:2011) Irish Standard I.S. EN ISO 50001:2011 Energy management systems - Requirements with guidance for use (ISO 50001:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law.

More information

STEEL TUBES AND FITTINGS FOR ON SHORE AND OFFSHORE PIPELINES - INTERNAL LINING WITH CEMENT MORTAR IRISH STANDARD I.S. EN 10298:2005.

STEEL TUBES AND FITTINGS FOR ON SHORE AND OFFSHORE PIPELINES - INTERNAL LINING WITH CEMENT MORTAR IRISH STANDARD I.S. EN 10298:2005. IRISH STANDARD I.S. EN 10298:2005 ICS 23.040.10 23.040.40 25.220.99 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland STEEL TUBES AND FITTINGS FOR ON SHORE AND OFFSHORE PIPELINES - INTERNAL

More information

PLASTICS - DETERMINATION OF THE MELT

PLASTICS - DETERMINATION OF THE MELT IRISH STANDARD I.S. EN ISO 1133:2005 ICS 83.080.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT Tel: +353 1

More information

ILNAS-EN ISO 23640:2015

ILNAS-EN ISO 23640:2015 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) In-vitro-Diagnostika - Haltbarkeitsprüfung von Reagenzien für invitro-diagnostische Untersuchungen

More information

OVERHEAD ELECTRICAL LINES EXCEEDING

OVERHEAD ELECTRICAL LINES EXCEEDING IRISH STANDARD I.S. EN 50423-1:2005 ICS 29.240.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV UP TO AND INCLUDING AC 45 KV Tel: +353

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-32289-2 Edition 1 EN 1176-7:2008 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation This

More information

Solar energy - Solar thermal collectors - Test methods (ISO 9806:2013)

Solar energy - Solar thermal collectors - Test methods (ISO 9806:2013) Irish Standard Solar energy - Solar thermal collectors - Test methods (ISO 9806:2013) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14073-3:2004 Office furniture - Storage furniture - Part 3: Test methods for the determination of stability and strength of the structure Office furniture - Storage furniture - Part

More information

Health Informatics - Harmonized data types for information interchange (ISO 21090:2011)

Health Informatics - Harmonized data types for information interchange (ISO 21090:2011) Irish Standard I.S. EN ISO 21090:2011 Health Informatics - Harmonized data types for information interchange (ISO 21090:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright

More information

ALARM SYSTEMS - INTRUSION AND

ALARM SYSTEMS - INTRUSION AND IRISH STANDARD I.S. EN 50131-1:2006 ICS 13.310 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS -- PART 1: SYSTEM Tel: +353 1 807 3800 Fax:

More information

Animal and vegetable fats and oils - Sampling (ISO 5555:2001)

Animal and vegetable fats and oils - Sampling (ISO 5555:2001) Irish Standard I.S. EN ISO 5555:2001&A1:2014 Animal and vegetable fats and oils - Sampling (ISO 5555:2001) CEN 2014 No copying without NSAI permission except as permitted by copyright law. I.S. EN ISO

More information

EXECUTION OF SPECIAL GEOTECHNICAL WORKS - MICROPILES IRISH STANDARD I.S. EN 14199:2005. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann 93.

EXECUTION OF SPECIAL GEOTECHNICAL WORKS - MICROPILES IRISH STANDARD I.S. EN 14199:2005. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann 93. IRISH STANDARD I.S. EN 14199:2005 ICS 93.020 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie EXECUTION OF SPECIAL GEOTECHNICAL

More information

WATER QUALITY - CRITERIA FOR

WATER QUALITY - CRITERIA FOR STANDARD I.S. EN ISO 17994:2004 ICS 07.100.20 13.060.70 National Standards Authority of Ireland Dublin 9 Ireland WATER QUALITY - CRITERIA FOR Tel: (01) 807 3800 Fax: (01) 807 3838 ESTABLISHING EQUIVALENCE

More information

Irish Standard I.S. EN :2016

Irish Standard I.S. EN :2016 Irish Standard I.S. EN 196-10:2016 Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement CEN 2016 No copying without NSAI permission except as permitted

More information

Sýnishorn Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics

Sýnishorn Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics ÍST EN 14885:2015 Gildistaka 15.12.2015 ICS: 71.1 Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics Staðfestur af Staðlaráði Íslands

More information

CONVENTIONS CONCERNING ELECTRIC AND MAGNETIC CIRCUITS (IEC 60375:2003) IRISH STANDARD I.S. EN 60375:2003. Price Code

CONVENTIONS CONCERNING ELECTRIC AND MAGNETIC CIRCUITS (IEC 60375:2003) IRISH STANDARD I.S. EN 60375:2003. Price Code IRISH STANDARD I.S. EN 60375:2003 ICS National Standards Authority of Ireland Dublin 9 Ireland CONVENTIONS CONCERNING ELECTRIC AND Tel: (01) 807 3800 Tel: (01) 807 3838 MAGNETIC CIRCUITS (IEC 60375:2003)

More information

Packaging - Distribution packaging - Graphical symbols for handling and storage of packages (ISO 780:2015)

Packaging - Distribution packaging - Graphical symbols for handling and storage of packages (ISO 780:2015) Irish Standard I.S. EN ISO 780:2015 Packaging - Distribution packaging - Graphical symbols for handling and storage of packages (ISO 780:2015) CEN 2016 No copying without NSAI permission except as permitted

More information

Irish Standard I.S. EN :2011+A1:2014

Irish Standard I.S. EN :2011+A1:2014 Irish Standard I.S. EN 1570-1:2011+A1:2014 Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings CEN 2014 No copying without NSAI permission except as permitted

More information

Road lighting - Part 2: Performance requirements

Road lighting - Part 2: Performance requirements Irish Standard I.S. EN 13201-2:2015 Road lighting - Part 2: Performance requirements CEN 2016 No copying without NSAI permission except as permitted by copyright law. I.S. EN 13201-2:2015 Incorporating

More information

Water quality - Determination of ph (ISO 10523:2008)

Water quality - Determination of ph (ISO 10523:2008) Irish Standard Water quality - Determination of ph (ISO 10523:2008) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based

More information

Sýnishorn Safety of woodworking machines - One side thickness planing machines

Sýnishorn Safety of woodworking machines - One side thickness planing machines EN 860:2007+A2:2012 Umsagnarfrestur til 15.4.2012 ICS: 79.12 Öryggi trésmíðavéla - Þykktarheflar til vinnslu á einni hlið Safety of woodworking machines - One side thickness planing machines Staðfestur

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-32335-6 Edition 1 (incorporating EN amdt 1) EN 13795:2011 Edition 2 (incorporating amdt 1) SOUTH AFRICAN NATIONAL STANDARD Surgical drapes, gowns and clean air suits, used as medical devices

More information

Cosmetics - Good Manufacturing Practices (GMP) - Guidelines on Good Manufacturing Practices (ISO 22716:2007, Corrected version )

Cosmetics - Good Manufacturing Practices (GMP) - Guidelines on Good Manufacturing Practices (ISO 22716:2007, Corrected version ) Irish Standard I.S. EN ISO 22716:2007 Cosmetics - Good Manufacturing Practices (GMP) - Guidelines on Good Manufacturing Practices (ISO 22716:2007, Corrected version 2008-05-15) CEN 2007 No copying without

More information

NATURAL STONE PRODUCTS - MODULAR TILES - REQUIREMENTS IRISH STANDARD I.S. EN 12057:2004. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

NATURAL STONE PRODUCTS - MODULAR TILES - REQUIREMENTS IRISH STANDARD I.S. EN 12057:2004. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann IRISH STANDARD I.S. EN 12057:2004 ICS 91.100.15 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie NATURAL STONE PRODUCTS -

More information

Water meters for cold potable water and hot water - Part 4: Non-metrological :2014)

Water meters for cold potable water and hot water - Part 4: Non-metrological :2014) Irish Standard I.S. EN ISO 4064-4:2014 Water meters for cold potable water and hot water - Part 4: Non-metrological requirements not covered in ISO 4064-1 (ISO 4064-4:2014) CEN 2014 No copying without

More information

NATURAL GAS - CALCULATION OF

NATURAL GAS - CALCULATION OF IRISH STANDARD I.S. EN ISO 12213-2:2005 ICS 75.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland NATURAL GAS - CALCULATION OF COMPRESSION FACTOR - PART 2: Tel: +353 1 807 3800 Fax:

More information

Irish Standard I.S. EN ISO :2013

Irish Standard I.S. EN ISO :2013 Irish Standard I.S. EN ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic

More information

Dentistry - Powered polymerization activators (ISO 10650:2015)

Dentistry - Powered polymerization activators (ISO 10650:2015) Irish Standard I.S. EN ISO 10650:2015 Dentistry - Powered polymerization activators (ISO 10650:2015) CEN 2015 No copying without NSAI permission except as permitted by copyright law. I.S. EN ISO 10650:2015

More information

Irish Standard I.S. EN :2011&A1:2014

Irish Standard I.S. EN :2011&A1:2014 Irish Standard I.S. EN 50130-4:2011&A1:2014 Alarm systems -- Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access

More information

CLEANROOMS AND ASSOCIATED

CLEANROOMS AND ASSOCIATED STANDARD I.S. EN ISO 14698-1:2003 ICS 13.040.35 CLEANROOMS AND ASSOCIATED National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 CONTROLLED ENVIRONMENTS - BIOCONTAMINATION

More information

SECONDARY CELLS AND BATTERIES

SECONDARY CELLS AND BATTERIES STANDARD I.S. EN 61960:2004 ICS 29.220.99 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR TOHER National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Fax: (01) 807 3838 NON-ACID

More information

ILNAS-EN ISO :2017

ILNAS-EN ISO :2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle (ISO 9606-1:2012, einschließlich

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-32290-8 EN 1176-10:2008 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment

More information

CROSS RECESSED RAISED COUNTERSUNK HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD (ISO 15483:1999) IRISH STANDARD I.S. EN ISO 15483:2000.

CROSS RECESSED RAISED COUNTERSUNK HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD (ISO 15483:1999) IRISH STANDARD I.S. EN ISO 15483:2000. IRISH STANDARD I.S. EN ISO 15483:2000 ICS 21.060.10 National Standards Authority of Ireland Dublin 9 Ireland CROSS RECESSED RAISED COUNTERSUNK Tel: (01) 807 3800 Tel: (01) 807 3838 HEAD DRILLING SCREWS

More information

Sýnishorn Specification for mortar for masonry - Part 2: Masonry mortar

Sýnishorn Specification for mortar for masonry - Part 2: Masonry mortar ÍST EN 998-2:2016 Gildistaka 15.2.2017 ICS: 91.1 Kröfur til múrs til nota í múrvirki - Hluti 2: Múr til nota í múrvirki Specification for mortar for masonry - Part 2: Masonry mortar Staðfestur af Staðlaráði

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16819 October 2015 ICS 03.240 English Version Postal services - Parcel boxes for end use - Technical features Services postaux

More information

PHOTOVOLTAIC DEVICES -- PART 2:

PHOTOVOLTAIC DEVICES -- PART 2: IRISH STANDARD I.S. EN 60904-2:2007 ICS 27.160 PHOTOVOLTAIC DEVICES -- PART 2: REQUIREMENTS FOR REFERENCE SOLAR National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800

More information

Earthing of power installations exceeding 1 kv a.c.

Earthing of power installations exceeding 1 kv a.c. Irish Standard I.S. EN 50522:2010 Earthing of power installations exceeding 1 kv a.c. NSAI 2010 No copying without NSAI permission except as permitted by copyright law. Incorporating amendments/corrigenda

More information