ZCI DOC-00 OSRAM GmbH Marcel-Breuer-Str München Germany. Auxiliary Equipment LS/PD AP KIT. See attached list

Transcription

1 OSRAM Document number: Manufacturer or representative: Address: Brand name or trade mark: Product type: Product designation: ZCI DOC-00 OSRAM GmbH Marcel-Breuer-Str München Germany OSRAM Auxiliary Equipment LS/PD AP KIT See attached list The designated product(s) is (are) in conformity with the provisions ofthe following European Directives. IXI 2006/95/EC 2004/108/EC 2009/125/EC 244/ / / M 2011/65/EU Directive ofthe European Parliament and ofthe Council of 12 December 2006 on the harmonisation ofthe laws of Member States relating to electrical equipment designed for use within certain voltage limits Directive of the European Parliament and of the Council of 15 September 2004 on the approximation ofthe laws ofthe Member States relating to electromagnetic compatibility Directive of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energyrelated products Commission Regulation (EC) implementing Directive 2005/32/EC ofthe European Parliament and of the Council with regard to ecodesign requirements for non-directional household lamps Commission Regulation (EC) implementing Directive 2005/32/EC ofthe European Parliament and ofthe Council with regard to ecodesign requirements for fluorescent lamps without integrated bailast, for high intensity discharge lamps, and for ballasts and luminaires able to operate such lamps, and repealing Directive 2000/55/EC ofthe European Parliament and ofthe Council Commission Regulation (EU) No 1194/ of 12 December implementing Directive 2009/125/EC ofthe European Parliament and ofthe Council with regard to ecodesign requirements for directional lamps, light emitting diode lamps and related equipment Directive ofthe European Parliament and ofthe Council of 8 June 2011 on the restriction ofthe use of certain hazardous substances in electrical and electronic equipment Further information regarding compliance with these Directives is given in the annex which constitutes a part of this declaration. Last two digits of the year in which the CE marking was affixed: 14 Place and date of signatures: Munich, April 2014 LEQMEM DE1M Signatures: Quality Management QM LAB, r. Schemmel Quality Management Q LAB Names: Alwin Veser Bernhard Schemmel This declaration of conformity is issued under the sole responsibility of the manufacturer or representative. It certifies compliance with the indicated Directives, but implies no warranty of properties. 1/5

2 Annex Document number: ZCI DOC-OO 20Fehler! Verweisquelle konnte nicht gefunden werden. / ZCI- 2006/95/EC is given by the compliance with the following European Standard(s) or other specifications. If not elsewhere/otherwise indicated the edition/amendment as referenced below applies. EN 60155: A1: A2:2007 EN : A1: A2: EN : A1: A2: EN : EN : A11:2009 EN : 1989 EN : EN : A1:2011 EN : 1997 EN : 1998 EN : A1:1997 EN : A2: A13:1997 EN : EN : 2003 EN : EN : A1: EN : 2010 EN : A1: A2:2008 EN 60968: EN 61195: A1: Glow-starters for fluorescent lamps Incandescent lamps Safety specifications Part 1: Tungsten filament lamps for domestic and similar general lighting purposes Incandescent lamps Safety specifications Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes Incandescent lamps Safety specifications Part 3: Tungsten halogen lamps (non-vehicle) Luminaires Part 1: General requirements and tests Luminaires Part 2-1: Particular requirements luminaires Fixed general purpose Luminaires Part 2-2: Particular requirements Recessed luminaires Luminaires Part 2-3: Particular requirements street lighting Luminaires Part 2-4: Particular requirements luminaires Luminaires Part 2-5: Particular requirements Floodlights Luminaires Part 2-6: Particular requirements transformers for filament lamps Luminaires Part 2-7: Particular requirements garden use Luminaires for road and Portable general purpose Luminaires with built-in Portable luminaires for Luminaires Part 2-8 : Particular requirements - Handlamps Luminaires Part 2-10: Particular requirements -- Portable luminaires for children Luminaires Part 2-12: Particular requirements -- Mains socket-outlet mounted nightlights Luminaires Part 2-13: Particular requirements -- Ground recessed luminaires Luminaires Part 2-20: Particular requirements -- Lighting chains Luminaires Part 2-22: Particular requirements -- Luminaires for emergency lighting Self-ballasted lamps for general lighting services -- Safety requirements Double-capped fluorescent lamps Safety specifications 2/5

3 EN 61199: A1: S EN : A1: A2: EN Corrigendum: A1: Corrigendum:2006 EN : EN : 2011 EN : EN : Corrigendum: A1: EN : EN : A1: K EN : Corrigendum: EN : A1:2010 EN : 2006 EN 61549: A1: A2: A3: EN 62031: A1: EN 62034: EN 62035: A1: A2: EN 62493: 2010 EN 62532: 2011 EN 62560: EN 62776: XXXX 34D/1064/CDV: 34A/1554/CD: Form EC Single-capped fluorescent lamps Safety specifications Lamp controlgear Part 1: General and safety requirements Lamp controlgear Part 2-1: Particular requirements for starting devices (other than glow Starters) Lamp controlgear Part 2-2: Particular requirements for d. c. or a. c. supplied electronic step-down convertors for filament lamps Lamp controlgear Part 2-3: Particular requirements for a. c. supplied electronic ballasts for fluorescent lamps Lamp controlgear Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) Lamp controlgear Part 2-8: Particular requirements for ballasts for fluorescent lamps Lamp controlgear Part 2-9: Particular requirements for ballasts for discharge lamps (exciuding fluorescent lamps) Lamp controlgear Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency Operation of cold start tubulär discharge lamps (neon tubes) Lamp controlgear Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires Lamp controlgear Part 2-12: Particular requirements for d. c. or a. c. supplied electronic ballasts for discharge lamps (exciuding fluorescent lamps) Lamp controlgear Part 2-13: Particular requirements for d. c. or a. c. supplied electronic controlgear for LED modules Miscellaneous lamps LED modules for general lighting Safety specifications Automatic test Systems for battery powered emergency escape lighting Discharge lamps (exciuding fluorescent lamps) Safety specifications Assessment of lighting equipment related to human exposure to electromagnetic fields Fluorescent induction lamps Safety specifications Self-ballasted LED-Iamps for general lighting services by voltage > 50 V Safety specifications Double-capped LED lamps for general lighting services Safety specifications (as far as photobiological safety is concerned) together with 34A/PRESCO(ASZ)101 - Attachment 06 (for LED luminaires) IEC ed 8: Luminaires - Part 1: General requirements and tests LED modules for general lighting Safety specifications (as far as photobiological safety) 3/5

4 IEC : (as far as photobiological safety is concerned) for Self-ballasted LED-Iamps, by A 2 ; voltage > 50V - Safety specifications 34A/1536/CDV: (as far as photobiological safety is concerned) for Double capped LED lamps for general lighting services -Safety specifications 2004/108/EC is given by the compliance with the following European Standard(s) or other specifications. If not elsewhere/otherwise indicated the edition/amendment as referenced below applies. EN 55015: Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment EN : Electromagnetic compatibility (EMC) Part 3-2: Limits Limits for harmonic current A1:2009 emissions (equipment input current s 16 A per phase) + A2:2009 EN : Electromagnetic compatibility (EMC) Part 3-3: Limits Limitation of voltage changes, voltage fluctuations and flicker in public low voltage supply Systems, for equipment with rated current < 16 A per phase and not subjected to conditional connection EN 61547: Equipment for general lighting purposes EMC immunity requirements /125/EC is given by the compliance with the following European Standard(s). If not elsewhere/otherwise indicated the edition/amendment as referenced below applies. EN 50294: Measurement method of total input power of ballast-lamp circuits A1: A2:2003 EN : Energy Performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear Form_EC_ /5

5 Attached list Document number: ZCI DOC-OO LS/PD AP KIT 5/5