CEN System - Delegated Decisions Dispatch 41:2016
|
|
- Abner Houston
- 6 years ago
- Views:
Transcription
1 Page 1 CEN System - Delegated Decisions Dispatch 41: CEN/CLC JWG CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/CLC JWG 9 DECISION 2016/01 CEN/CENELEC JWG9 on Subject: CEN/CLC JWG9- Appointment of Chairperson The CEN/CENELEC JWG9 Energy measurement plan for organisations, - considering the CEN/CENELEC Internal Regulations - Part 2, subclause 3.2.2, which lays down the rules for nomination, appointment and responsibilities of Chairpersons; - noting the nomination by the Technical Committee Secretariat; - noting the commitment of the applicant the responsibilities and duties of a Technical Committee Chairperson as given in the CEN BOSS; decides appoint Fabien Imbault as Chairperson of CEN/CENELEC JWG9 for a period of 3 years starting on The decision was unanimity
2 Page 2 DECISION 2016/02 CEN/CENELEC JWG9 on Subject: CEN/CENELEC JWG9 Appointment of Vice-Chairperson The CEN/CENELEC JWG9 Energy measurement plan for organisations - considering the nomination by the CEN/CENELEC JWG9 Chairperson and Secretariat; - confirming that the appointment of a Vice-Chairman would be beneficial CEN/CENELEC JWG9 and the work carried out in this technical committee; decides appoint Franck Gruffaz as Vice-Chairperson of CEN/CENELEC JWG9 for a period of 3 years starting on with the specific duty liaise with relevant cenelec work. 2 CEN/TC 122 Decision CEN/TC /2016 taken on Subject: CEN/TC Adoption of a New Work Item CEN/TC Ergonomics having considered the proposal for a new work item as documented in CEN/TC 122 N corresponds 3. Document developed in drafting a new project CEN/TC 122/WG 11 - Ergonomics of the Physical Environment 4. Title Ergonomics - Accessible design - Method for creating colour combinations taking account of age-related change of human colour vision 5. Scope This International Standard provides a method for creating conspicuous colour combinations for use in visual signs and displays taking in account viewer age. It is based on the perceived similarity of colours at phopic and mesopic lighting conditions. This International Standard applies the design of visual signs and displays in which multiple colours
3 Page 3 are used so that the colours are conspicuous people of any age, including older people who do not have deficient colour vision. The method and data in this International Standard are not applicable the design of visual signs and displays for people with colour deficiencies or medical disorders affecting vision. Basically, this International Standard applies the reflective or object mode colours, but may apply selfluminous mode colours if the colour coordinates are appropriately transferred those of the object mode colours. None of the above. Adoption of already published ISO standard environmental? Other: Adoption of already published ISO standard an ISO document Identical ISO project reference: ISO Related mandate(s) No Issue year: 2016 ISO Project ID: 12. Related directive(s) No 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: Weighted vote and simple majority. Percentage of positive weighted votes (min. 71%):78 9 positive vote(s), 1 negative vote(s) and 10 abstention(s). 3 CEN/TC 130 Decision CEN/TC 130 4/2016 taken on Subject: CEN/TC Adoption of a New Work Item CEN/TC Space heating appliances without integral heat sources having considered the proposal for a new work item as documented in CEN/TC 130 N
4 Page 4 corresponds 3. Document developed in drafting a new project CEN/TC 130/WG 13 - Determination of parameters for the efficiency of heating and cooling emission products in relation pren Coordination - Group 4. Title Heating and cooling emission products - Input data for determining the temperature variation in relation EN Scope Considering that the new FprEN :2016 gives the possibility of using input data from the product standards, it is proposed define a new standard which comply with FprEN :2016 itself. The new standard will provide a method for determining input data in conformity with FprEN :2016 for the heating and cooling emission products covered by the following EN standards developed by TC 130: - EN 442 Radiars and convecrs; - EN 1264 Water based surface embedded heating and cooling systems; - EN Ceiling mounted radiant panels supplied with water at temperature below 120 C; - EN 215 Thermostatic radiars valves; - EN Fan assisted radiars, convecrs and trench convecr. The aim is develop methods for determination of temperature variations values as input data for FprEN :2015 based on values taken from the above mentioned standards. environmental? Use of energy Bring in environmental expertise the WG No document from another organization 11. Related mandate(s) No 12. Related directive(s) No 13. Commitment The following CEN members (at least five) are committed participate in the development of the project:
5 Page 5 AFNOR DIN DS NBN SFS SNV UNI Weighted vote and simple majority. Percentage of positive weighted votes (min. 71%): positive vote(s), 7 abstention(s). 4 CEN/TC 142 Decision 12/2016 CEN/TC 142 on Subject: CEN/TC 142 Chairmanship Item 7 The CEN/TC CEN/TC 142 Woodworking machines Safety - considering the CEN/CENELEC Internal Regulations - Part 2, subclause 3.2.2, which lays down the rules for nomination, appointment and responsibilities of Chairpersons; - noting the nomination by the Technical Committee Secretariat; - noting the commitment of the applicant the responsibilities and duties of a Technical Committee Chairperson as given in the CEN BOSS; decides appoint Mr Matteo Simonetta, as Chairman of CEN/TC 142 for a period of 6 years starting on The decision was unanimity. 5 CEN/TC 151 Decision CEN/TC /2016 taken on Subject: Extension of dow be included in the future pren ISO CEN/TC Construction equipment and building material machines - Safety having noted the request of CEN/TC 151 WG 15 for an extension of the date of withdrawal (dow) for the future pren ISO and having noted the justification given for this request: EN (WI ) "Construction machinery - Electromagnetic compatibility of machines with internal power supply" will be replaced by EN ISO (WI ) "Earth-moving- and Building construction machinery - Electromagnetic compatibility of machines with internal electrical power supply - Part 1: General EMC requirements under typical EMC environmental conditions" and supplemented by EN ISO "Earth-moving machinery - Electromagnetic compatibility - Part
6 Page 6 2: EMC requirements under the aspect of functional safety". This updated version of EN ISO makes significant changes allowable test procols. There are many manufacturers that will need make significant changes their testing procedures. Additionally, when EN ISO becomes in effect, all machines going on the market will have have their EMC compliance documentation updated for their product going Europe in concordance with the new standard. In many cases test procedures and equipment will need change. This will result in additional EMC tests needing be run on product still in series production that were tested the old standard. This is a huge amount of work and resources make this happen. In some cases, design changes may be required meet the requirements of the new version of EN ISO and -2. The requested extension (36 months) date of withdrawal for EN would allow manufacturers be able better manage what in some cases will be a significant amount of work become compliant with the new EN ISO series.; having noted the advice of the CEN/TC Construction equipment and building material machines - Safety; considering the CEN/CENELEC Internal Regulations - Part 2, clause , laying down the procedure be followed in exceptional cases; agrees with the requested extension of dow for the future pren ISO : Earth-moving- and Building construction machinery - Electromagnetic compatibility of machines with internal electrical power supply - Part 1: General EMC requirements under typical EMC environmental conditions (ISO/DIS :2016), pren ISOS : Earth-moving machinery - Electromagnetic compatibility - Part 2: EMC requirements under the aspect of functional safety (ISO/DIS :2016) from the date of availability (dav) plus 6 months the date of availability (dav) plus 36 months. The decision was simple majority with 7 positive vote(s), 11 abstention(s). 6 CEN/TC 163 Decision CEN/TC 163 C002/2016 taken on Subject: CEN/TC Adoption of a New Work Item CEN/TC Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N
7 Page 7 corresponds 3. Document developed in drafting an amendment an EN. CEN/TC 163/WG 3 - Closet bowls, flushing cisterns, urinals, bidets and kitchen sinks 4. Title Kitchen sinks - Functional requirements and test methods 5. Scope This European Standard specifies the functional requirements of and test methods for kitchen sinks for domestic purposes, which ensure that the product, when installed in accordance with the manufacturers instructions, gives satisfacry performance. NOTE 1 For the purposes of this standard, the term domestic purposes includes use in hotels, accommodation for students, hospitals and similar buildings. This document does not specify aesthetic requirements and the overall dimensions of kitchen sinks. It does not apply industrial kitchen sinks. NOTE 2 All drawings are examples only; other forms are permissible. environmental? Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization 11. Related mandate(s) M/ Related directive(s) Directive reference For citation in Official Journal 305/ Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s), 7 abstention(s).
8 Page 8 Decision CEN/TC 163 C003/2016 taken on Subject: CEN/TC Adoption of a New Work Item CEN/TC Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N corresponds 3. Document developed in drafting an amendment an EN. CEN/TC 163/WG 3 - Closet bowls, flushing cisterns, urinals, bidets and kitchen sinks 4. Title Wall-hung urinals - Functional requirements and test methods 5. Scope This European Standard specifies constructional and performance requirements gether with test methods for wall-hung urinals made of vitreous china or stainless steel that are used for personal hygiene. This European Standard does not apply slab and stall urinals nor waterless urinals. environmental? Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization 11. Related mandate(s) M/ Related directive(s) Directive reference For citation in Official Journal
9 Page 9 305/ Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s), 7 abstention(s). Decision CEN/TC 163 C004/2016 taken on Subject: CEN/TC Adoption of a New Work Item CEN/TC Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N corresponds the revision of an EN. EN 14055:2010+A1: Document developed in drafting CEN/TC 163/WG 3 - Closet bowls, flushing cisterns, urinals, bidets and kitchen sinks 4. Title WC and urinal flushing cisterns 5. Scope This European Standard specifies design, performance requirements and the test methods for WC and urinal flushing cisterns with flushing mechanism, inlet valve and overflow. This document covers flushing cisterns designed be connected drinking water installations inside buildings. This standard does not cover aumatic valveless siphon flushing cisterns for flushing urinals. NOTE Flushing cisterns for one-piece
10 Page 10 environmental? WCs and close-coupled suites are covered by EN 997. Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization 11. Related mandate(s) M/ Related directive(s) Directive reference For citation in Official Journal 305/ Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s), 7 abstention(s). Decision CEN/TC 163 C005/2016 taken on Subject: CEN/TC Adoption of a New Work Item CEN/TC Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N
11 Page 11 corresponds 3. Document developed in drafting an amendment an EN. CEN/TC 163/WG 3 - Closet bowls, flushing cisterns, urinals, bidets and kitchen sinks 4. Title Sanitary appliances - Communal washing troughs 5. Scope This document specifies requirements for the cleanability, load resistance and durability of communal washing troughs used for domestic purposes. NOTE For the purposes of this document, the term "domestic purposes" includes use in facry changing-rooms, sportsclubs, accommodation for students, hospitals and similar buildings, except when special medical provisions are required. environmental? Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization 11. Related mandate(s) M/ Related directive(s) Directive reference For citation in Official Journal 305/ Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s),
12 Page 12 7 abstention(s). Decision CEN/TC 163 C006/2016 taken on Subject: CEN/TC Adoption of a New Work Item CEN/TC Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N corresponds 3. Document developed in drafting an amendment an EN. CEN/TC 163/WG 3 - Closet bowls, flushing cisterns, urinals, bidets and kitchen sinks 4. Title Bidets - Functional requirements and test methods 5. Scope This European Standard specifies the functional requirements and test methods for bidets used for domestic purposes and made from either ceramics or stainless steel. All drawings are examples only, other forms are permissible. NOTE For the purposes of this standard the term domestic purposes includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required. environmental? Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization 11. Related mandate(s)
13 Page 13 M/ Related directive(s) Directive reference For citation in Official Journal 305/ Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s), 7 abstention(s). Decision CEN/TC 163 C007/2016 taken on Subject: CEN/TC Adoption of a New Work Item CEN/TC Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N corresponds 3. Document developed in drafting an amendment an EN. CEN/TC 163/WG 3 - Closet bowls, flushing cisterns, urinals, bidets and kitchen sinks 4. Title Sanitary appliances - Wash basins - Functional requirements and test methods 5. Scope This European Standard specifies the functional requirements and test
14 Page 14 environmental? methods for wash basins for domestic purposes. NOTE 1 For the purposes of this standard the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required. NOTE 2 All drawings are examples only. The shape of the appliance is left the discretion of the manufacturer. Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization 11. Related mandate(s) M/ Related directive(s) Directive reference For citation in Official Journal 305/ Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s), 7 abstention(s). Decision CEN/TC 163 C008/2016 taken on Subject: CEN/TC Adoption of a New Work Item CEN/TC Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N
15 Page 15 corresponds the revision of an EN. EN 997:2012+A1: Document developed in drafting CEN/TC 163/WG 3 - Closet bowls, flushing cisterns, urinals, bidets and kitchen sinks 4. Title WC pans and WC suites with integral trap 5. Scope This European Standard specifies constructional and performance requirements gether with test methods for close-coupled suites, onepiece and independent WC pans with integral trap used for personal hygiene manufactured from glazed ceramics or stainless steel. This European Standard does not apply squatting ilets, WC pans without integral trap or flushing cisterns as separate appliances. In the case of independent WC pans, the associated flushing cisterns and pressure valves are covered by other standards and the reference cisterns in this standard is related only the definition and requirements of flushing volume. In the case of close-coupled suites and one-piece WCs, this standard also specifies design, performance requirements and the test methods for designated flushing cisterns with flushing mechanisms, inlet valves and overflows. For these products, this standard covers flushing cisterns designed be connected drinking water installations inside buildings. Before installation of WCs, EN and national requirements need be taken in consideration. environmental? Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization 11. Related mandate(s) 12. Related M/110
16 Page 16 directive(s) Directive reference For citation in Official Journal 305/ Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s), 7 abstention(s). Decision CEN/TC 163 C009/2016 taken on Subject: CEN/TC Adoption of a New Work Item CEN/TC Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N corresponds 3. Document developed in drafting an amendment an EN. CEN/TC 163/WG 4 - Baths (W/Pools) - Shower trays (Performance testing) 4. Title Sanitary appliances - Specification for whirlpool baths 5. Scope This European Standard specifies requirements for whirlpool baths, having a rated voltage of not more than 250 V for single phase appliances and 480 V for other appliances, which are intended be installed in indoor domestic situations and used in accordance with the manufacturer s instructions for personal hygiene. Such whirlpool baths are tested and supplied as a complete independent unit designed be drained down
17 Page 17 environmental? after every use. They may be transported in several separate parts, for assembly on site, facilitate delivery. Safety of Whirlpool baths (except use by young children and slow moving/weak elderly or disabled individuals) are covered by EN Exclusions: this standard does not cover additional requirements for whirlpool baths intended for uses where specific medical provisions are required, or whirlpool baths for communal uses where they are not drained down after every use. Portable whirlpool devices are not covered by this standard. For the purposes of this standard the term domestic situations includes use in hotels, accommodation for students, hospitals and similar buildings. Warning: Slow moving elderly or disabled persons should take care when using whirlpool baths. Young children should not be allowed use whirlpool baths without supervision. NOTE 1 It is unrealistic expect manufacturers provide a definition of what constitutes a slow moving elderly or disabled person, or young children. The former is the responsibility of the individual or a carer. The latter is a parental responsibility. NOTE 2 When EN is amended cover use of whirlpool baths by slow moving elderly or disabled persons and young children the warning given above will be deleted from this standard. Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization 11. Related mandate(s) M/ Related directive(s) Directive reference For citation in Official Journal 305/ Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s),
18 Page 18 7 abstention(s). Decision CEN/TC 163 C010/2016 taken on Subject: CEN/TC Adoption of a New Work Item CEN/TC Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N corresponds 3. Document developed in drafting an amendment an EN. CEN/TC 163/WG 4 - Baths (W/Pools) - Shower trays (Performance testing) 4. Title Shower enclosures - Functional requirements and test methods 5. Scope This European Standard specifies requirements for shower enclosures for domestic purposes which ensure that the product, when installed in accordance with the manufacturer's installation instructions, gives satisfacry performance when used as intended. This European Standard does not apply shower cabinets or curtains and does not specify aesthetic and dimensional requirements. NOTE For the purposes of this document the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required. environmental? Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization
19 Page Related mandate(s) 12. Related directive(s) M/110 Directive reference For citation in Official Journal 305/ Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s), 7 abstention(s). Decision CEN/TC 163 C011/2016 taken on Subject: CEN/TC Adoption of a New Work Item CEN/TC Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N corresponds 3. Document developed in drafting an amendment an EN. CEN/TC 163/WG 4 - Baths (W/Pools) - Shower trays (Performance testing) 4. Title Baths for domestic purposes
20 Page Scope This document specifies requirements, test methods and procedures for evaluation of conformity for baths used for domestic purposes and personal hygiene, which ensure that the product, when installed and maintained in accordance with the manufacturer's instructions, will satisfy requirements for cleanability and durability. This document is applicable all sizes and shapes of baths. This document does not cover baths for use with medical provisions. NOTE 1 For the purpose of this standard the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings. NOTE 2 Annex A lists characteristics of materials commonly used for manufacturing baths. environmental? Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization 11. Related mandate(s) M/ Related directive(s) Directive reference For citation in Official Journal 305/ Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s), 7 abstention(s).
21 Page 21 Decision CEN/TC 163 C012/2016 taken on Subject: CEN/TC Adoption of a New Work Item CEN/TC Sanitary appliances having considered the proposal for a new work item as documented in CEN/TC 163 N corresponds 3. Document developed in drafting an amendment an EN. CEN/TC 163/WG 4 - Baths (W/Pools) - Shower trays (Performance testing) 4. Title Shower trays for domestic purposes 5. Scope This European Standard specifies requirements, test methods and procedures for evaluation of conformity for shower trays used for domestic purposes which ensure that the product, when installed, used and maintained in accordance with the manufacturer's instructions, will satisfy cleanability and durability when used for personal hygiene. This standard is applicable all sizes and shapes of shower trays. This standard does not cover shower trays for use with medical provisions. NOTE 1 For the purpose of this standard the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings. NOTE 2 Annex A lists characteristics of materials commonly used for manufacturing shower trays. environmental? Other: To be dealt with within the entitled WG Use of environmental checklist No document from another organization 11. Related mandate(s) M/110
22 Page Related directive(s) Directive reference For citation in Official Journal 305/ Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR DIN NBN NEN SIS SNV UNI Simple majority with 13 positive vote(s), 7 abstention(s). 7 CEN/TC 180 Decision CEN/TC 180 C02/2016 taken on Subject: CEN/TC Adoption of a New Work Item CEN/TC Decentralized gas heating having considered the proposal for a new work item as documented in CEN/TC 180 N corresponds 3. Document developed in drafting a new project CEN/TC 180/WG 1 - Non domestic gas-fired overhead radiant tube and luminous heaters - Safety and Efficiency. 4. Title Safety and energy efficiency of gas-fired luminous heaters for nondomestic premises
23 Page Scope This European Standard specifies the requirements and test methods for the construction, safety, rational use of energy, classification and marking of non-domestic gas-fired overhead luminous radiant heaters for environmental comfort, referred in the of the text as appliances. This European Standard is applicable Type A1 and Type A3 appliances only (see 4.2.2) intended for use in other than residential dwellings: a) low gas pressure appliances operating at pressures up and including 50 mbar; b) medium gas pressure appliances operating at pressures above 50 mbar and up 2 bar. This European Standard is not applicable : - appliances designed for use in domestic dwellings; - outdoor appliances; - appliances of heat input in excess of 120 kw (based on the net calorific value of the appropriate reference gas); This standard is applicable appliances which are intended be type tested. Requirements for appliances which are not intended be type tested would need be subject further consideration. environmental? Other: Will be supplied later Other: Will be supplied later No document from another organization 11. Related mandate(s) No 12. Related directive(s) No 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR BSI DIN NBN NEN UNI Weighted vote and simple majority. Percentage of positive weighted votes (min. 71%): positive vote(s), 10 abstention(s).
24 Page 24 8 CEN/TC 195 Decision CEN/TC /2016 taken on Subject: CEN/TC Adoption of a New Work Item CEN/TC Air filters for general air cleaning having considered the proposal for a new work item as documented in CEN/TC 195 N corresponds the revision of an EN. EN : Document developed in drafting CEN/TC 195/WG 2 - HEPA and ULPA filters 4. Title High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking 5. Scope This European Standard applies high efficiency particulate and ultra low penetration air filters (EPA, HEPA and ULPA) used in the field of ventilation and air conditioning and for technical processes, e.g. for applications in clean room technology or pharmaceutical industry. It establishes a procedure for the determination of the efficiency on the basis of a particle counting method using a liquid (or alternatively a solid) test aerosol, and allows a standardized classification of these filters in terms of their efficiency, both local and integral efficiency. environmental? Emissions air Bring in environmental expertise the WG No document from another organization 11. Related No
25 Page 25 mandate(s) 12. Related directive(s) No 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: AFNOR ASI DIN NBN NEN SFS SNV UNI Weighted vote and simple majority. Percentage of positive weighted votes (min. 71%): positive vote(s), 6 abstention(s). Decision CEN/TC /2016 taken on Subject: CEN/TC Adoption of a New Work Item CEN/TC Air filters for general air cleaning having considered the proposal for a new work item as documented in CEN/TC 195 N corresponds the revision of an EN. EN : Document developed in drafting CEN/TC 195/WG 2 - HEPA and ULPA filters 4. Title High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics 5. Scope This Part of ISO specifies the aerosol production and measuring
26 Page 26 environmental? equipment used for testing high efficiency filters and filter media in accordance with ISO , ISO and ISO , as well as the statistical basis for particle counting with a small number of counted events. Emissions air Bring in environmental expertise the WG an ISO document Identical ISO project reference: Related mandate(s) No Issue year: 2011 ISO Project ID: 12. Related directive(s) No 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: Weighted vote and simple majority. Percentage of positive weighted votes (min. 71%): positive vote(s), 6 abstention(s). Decision CEN/TC /2016 taken on Subject: CEN/TC Adoption of a New Work Item CEN/TC Air filters for general air cleaning having considered the proposal for a new work item as documented in CEN/TC 195 N
27 Page 27 corresponds the revision of an EN. EN : Document developed in drafting CEN/TC 195/WG 2 - HEPA and ULPA filters 4. Title High-efficiency filters and filter media for removing particles in air - Part 3: Testing flat sheet filter media 5. Scope This Part of ISO specifies the test procedure for testing the efficiency of flat sheet filter media. Emissions air environmental? Bring in environmental expertise the WG an ISO document Identical ISO project reference: Project ID: Related mandate(s) No Issue year: 2011 ISO 12. Related directive(s) No 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: Weighted vote and simple majority. Percentage of positive weighted votes (min. 71%): positive vote(s), 6 abstention(s). Decision CEN/TC /2016 taken on Subject: CEN/TC Adoption of a New Work Item CEN/TC Air filters for general air cleaning having considered the proposal for a new work item as documented in CEN/TC 195 N
28 Page 28 corresponds the revision of an EN. EN : Document developed in drafting CEN/TC 195/WG 2 - HEPA and ULPA filters 4. Title High-efficiency filters and filter media for removing particles in air - Part 4: Test method for determining leakage of filter elements-scan method 5. Scope This Part of ISO specifies the test procedure of the "scan method", considered be the reference method, for determining the leakage of filter elements. It is applicable filters ranging from classes ISO 35 H ISO 75 U. It also describes the other normative methods "oil thread leak test" (Annex A) and "Phometer leak test" (Annex B), applicable classes ISO 35 H ISO 45 H HEPA filters, and Leak Test with solid PSL Aerosol (Annex E). environmental? Emissions air Bring in environmental expertise the WG an ISO document Identical ISO project reference: Related mandate(s) No 12. Related directive(s) No Issue year: 2011 ISO Project ID: 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: Weighted vote and simple majority. Percentage of positive weighted votes (min. 71%): positive vote(s), 6 abstention(s).
29 Page 29 Decision CEN/TC /2016 taken on Subject: CEN/TC Adoption of a New Work Item CEN/TC Air filters for general air cleaning having considered the proposal for a new work item as documented in CEN/TC 195 N corresponds the revision of an EN. EN : Document developed in drafting CEN/TC 195/WG 2 - HEPA and ULPA filters 4. Title High-efficiency filters and filter media for removing particles in air - Part 5: Test method for filter elements 5. Scope This Part of ISO specifies the reference test procedure for determining the efficiency of filters at their MPPS. It also gives guidelines for the testing and classification for filters with MPPS <0,1 m (Annex B) and filters using media with (charged) synthetic fibres (Annex C). environmental? Emissions air Bring in environmental expertise the WG an ISO document Identical ISO project reference: Related mandate(s) No Issue year: 2011 ISO Project ID: 12. Related directive(s) No 13. Commitment The following CEN members (at least five) are committed participate
30 Page 30 in the development of the project: Weighted vote and simple majority. Percentage of positive weighted votes (min. 71%): positive vote(s), 6 abstention(s). 9 CEN/TC 197 DECISION N 011/2016 CEN/TC 197 on Subject: CEN/TC Appointment of Chairperson The CEN/TC 197 "pumps, considering the CEN/CENELEC Internal Regulations - Part 2, subclause 3.2.2, which lays down the rules for nomination, appointment and responsibilities of Chairpersons; noting the nomination by the Technical Committee Secretariat; noting the commitment of the applicant the responsibilities and duties of a Technical Committee Chairperson as given in the CEN BOSS; decides appoint M. Guillaume PINTRAND (AFNOR) as Chairperson of CEN/TC 197 for a period of 3 years starting on The decision was unanimity or simple majority with 12 positive votes, and 4 abstentions. 10 CEN/TC 203 Decision CEN/TC /2016 taken on Subject: 3 year time-frame for the development of WI month Tolerance Request. CEN/TC Cast iron pipes, fittings and their joints considering Resolution BT 34/2002 by which BT decided that any work item result in an EN, registered after , shall normally result in an EN after 3 years and set maximum times between well identified stages, as well as Resolution BT 42/2003 deciding on variant timeframes; considering Resolution BT 42/2008 allowing the CEN/TCs, for well identified and justified reasons, claim one lerance of 9 months, applicable the target dates for submission of a draft CCMC (or ISO/CS in case of Vienna Agreement - CEN Lead) for the relevant procedure(s) (i.e. CEN Enquiry and/or Formal Vote, UAP, TCA);
31 Page 31 considering that for work item pren 877 rev - Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance, it proves impossible Dispatch ENQ draft CMC by claims a lerance of 9 months (i.e. a postponement of 9 months of the deadlines for all the stages not yet reached) for the following reasons: matching CPR requirements ok more time than expected. Furthermore, indicative assessment still didn't receive feedback (launched in May) confirms that CEN/TC 203 will Dispatch ENQ draft CMC (or ISO/CS in case of Vienna Agreement - CEN Lead) by at the latest. The decision was simple majority with 13 positive vote(s), 1 negative vote(s) and 2 abstention(s). 11 CEN/TC 216 Decision CEN/TC /2016 taken on Subject: CEN/TC Adoption of a New Work Item CEN/TC Chemical disinfectants and antiseptics having considered the proposal for a new work item as documented in CEN/TC 216 N corresponds 3. Document developed in drafting an amendment an EN. CEN/TC 216/WG 1 - Human medicine 4. Title Chemical disinfectants and antiseptics - Surgical hand disinfection - Test method and requirements (phase 2, step 2) 5. Scope This European Standard specifies a test method simulating practical conditions for establishing whether a product for surgical handrub and handwash reduces the release of resident and eventually present transient microbial flora on hands when used for the treatment of clean hands of volunteers. This European Standard applies products for surgical handrub or handwash for use in areas and situations where disinfection is medically indicated. Such indications occur in patient care,
32 Page 32 for example: - in hospitals, in community medical facilities and in dental institutions; - in clinics of schools, of kindergartens and of nursing homes. and may occur in the workplace and in the home. It may also include services such as laundries and kitchens supplying products directly for the patient. EN specifies in detail the relationship of the various tests one another and use recommendations. NOTE This method corresponds a phase 2, step 2 test. Discharges soil Discharges water Emissions air Use of materials Use of water environmental? Other: Decision taken during CEN/TC 216 plenary meeting (2010) regarding the foreword that have been added EN 14885:2015 No document from another organization 11. Related mandate(s) No 12. Related directive(s) No 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: BSI DIN SFS SIS SNV Weighted vote and simple majority. Percentage of positive weighted votes (min. 71%):84 9 positive vote(s), 1 negative vote(s) and 7 abstention(s).
33 Page CEN/TC 260 Decision CEN/TC 260 C619/2016 taken on Subject: 3 year time-frame for the development of WI month Tolerance Request. CEN/TC Fertilizers and liming materials considering Resolution BT 34/2002 by which BT decided that any work item result in an EN, registered after , shall normally result in an EN after 3 years and set maximum times between well identified stages, as well as Resolution BT 42/2003 deciding on variant timeframes; considering Resolution BT 42/2008 allowing the CEN/TCs, for well identified and justified reasons, claim one lerance of 9 months, applicable the target dates for submission of a draft CCMC (or ISO/CS in case of Vienna Agreement - CEN Lead) for the relevant procedure(s) (i.e. CEN Enquiry and/or Formal Vote, UAP, TCA); considering that for work item pren Fertilizers - Determination of the water-soluble potassium content, it proves impossible Dispatch ENQ draft CMC by claims a lerance of 9 months (i.e. a postponement of 9 months of the deadlines for all the stages not yet reached) for the following reasons: Further preparary work and consultation between experts of WG 7 is necessary in order consider the comments on pren and take a decision on the future of this Draft European Standard by WG 7. confirms that CEN/TC 260 will Dispatch ENQ draft CMC (or ISO/CS in case of Vienna Agreement - CEN Lead) by at the latest. The decision was simple majority with 12 positive vote(s), 5 abstention(s). 13 CEN/TC 335 Decision CEN/TC 335 2/2016 taken on Subject: CEN/TC Adoption of a New Work Item CEN/TC Solid biofuels having considered the proposal for a new work item as documented in CEN/TC 335 N
34 Page 34 corresponds a new project 3. Document developed in drafting CEN/TC Solid biofuels 4. Title Solid biofuels Grindability Determination - Part 1: Grindability determination of uncompressed fuels 5. Scope This document specifies a method for the grindability determination of uncompressed fuels e.g. wood chips, hog fuel, olive snes etc. None of the above. Lab test for biofuels with no environmental. address these environmental? Other: No environmental in this labstandard - Parallel ISO Lead ISO project reference: ISO Project ID: ISO TC: ISO/TC 238 No document from another organization 11. Related mandate(s) No 12. Related directive(s) No 13. Commitment The following CEN members (at least five) are committed participate in the development of the project: AENOR AFNOR ASI DIN NBN NQIS/ELOT SFS UNI Weighted vote and simple majority. Percentage of positive weighted votes (min. 71%):95 20 positive vote(s), 1 negative vote(s) and 0 abstention(s).
35 Page CEN/TC 349 CEN/TC 349 Decision C1/2016 CEN/TC 349 Chairperson Subject: CEN/TC Re-appointment of the CEN/TC 349 Chairperson CEN/TC 349 Sealants for joints in building construction considering the CEN/CENELEC Internal Regulations - Part 2, subclause 3.2.2, which lays down the rules for nomination, appointment and responsibilities of Chairpersons; noting the nomination by the Technical Committee Secretariat; noting the commitment of the professional standardization support from AFNOR; noting the commitment of the applicant the responsibilities and duties of a Technical Committee Chairperson as given in the CEN BOSS; decides re-appoint François ADELEU, as Chairman of CEN/TC 349 for a further 3-years, noting that François ADELEU is Chairperson of the Technical Committee since 15th May The decision was unanimity with 9 positive votes, 8 abstentions.
CEN System Delegated Decisions Dispatch 33:2016
2016-08-16 Page 1 CEN System Delegated Decisions Dispatch 33:2016 1 CEN/TC 127 Correspondence... 1 2 CEN/TC 147 Correspondence... 9 3 CEN/TC 160 Correspondence... 10 4 CEN/TC 182 Correspondence... 12 5
More informationCEN System - Delegated Decisions Dispatch 39:2016
2016-09-26 Page 1 CEN System - Delegated Decisions Dispatch 39:2016 1 CEN/TC 104... 1 2 CEN/TC 122... 3 3 CEN/TC 134... 6 4 CEN/TC 136... 7 5 CEN/TC 144... 8 6 CEN/TC 150... 8 7 CEN/TC 153... 9 8 CEN/TC
More informationCEN System - Delegated Decisions Dispatch 14:2017
2017-04-03 Page 1 CEN System - Delegated Decisions Dispatch 14:2017 1 CEN/TC 33... 1 2 CEN/TC 52... 4 3 CEN/TC 53... 5 4 CEN/TC 72... 6 5 CEN/TC 123... 7 6 CEN/TC 129... 8 7 CEN/TC 155... 11 8 CEN/TC 161...
More informationCEN System - Delegated Decisions Dispatch 34:2017
2017-08-21 Page 1 CEN System - Delegated Decisions Dispatch 34:2017 1 CEN/TC 19... 1 2 CEN/TC 54... 3 3 CEN/TC 88... 4 4 CEN/TC 112... 5 5 CEN/TC 147... 6 6 CEN/TC 169... 8 7 CEN/TC 191... 9 8 CEN/TC 193...
More informationCEN System - Delegated Decisions Dispatch 22:2017
2017-05-29 Page 1 CEN System - Delegated Decisions Dispatch 22:2017 1 CEN/TC 19... 1 2 CEN/TC 33... 4 3 CEN/TC 128... 6 4 CEN/TC 155... 8 5 CEN/TC 169... 12 6 CEN/TC 183... 13 7 CEN/TC 250... 20 8 CEN/TC
More informationCEN System - Delegated Decisions Dispatch 23:2017
CEN System - Delegated Decisions Dispatch 23:2017 DDD 23 2017 2017-06-05 Page 1 1 CEN/TC 10... 1 2 CEN/TC 19... 3 3 CEN/TC 47... 4 4 CEN/TC 69... 6 5 CEN/TC 104... 7 6 CEN/TC 107... 8 7 CEN/TC 124... 20
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 17221 April 2018 ICS 91.140.70 English Version Guidance on the application of CE marking and preparation of Declaration of Performance for
More informationBUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY Standards to be delivered by this TC cover pipe products for the construction of public, industrial or private
More informationCEN/TC 207 N N Work programme May Document type: Other committee document. Date of document:
CEN/TC 207 N 1646 CEN/TC 207 Furniture Email of secretary: fabrizio.tacca@uni.com Secretariat: UNI (Italy) N 1646 - Work programme May 2016 Document type: Other committee document Date of document: 2016-05-05
More informationCEN System - Delegated Decisions Dispatch 16:2018
2018-04-16 Page 1 CEN System - Delegated Decisions Dispatch 16:2018 1 CEN/TC 10... 1 2 CEN/TC 33... 2 3 CEN/TC 102... 6 4 CEN/TC 132... 9 5 CEN/TC 140... 15 6 CEN/TC 153... 15 7 CEN/TC 155... 16 8 CEN/TC
More informationThe Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles
The Process of making European Standards Frank Moore Chairman CEN TC/248 Textiles 1 European Standards CEN & CENELEC systems Standards development process Links to legislation International dimension What
More informationDoc. Number: N Report of CEN/TC 267 Secretariat "Industrial piping and pipelines" for the 30 th Plenary Meeting 27 October 2016 (Paris)
«Industrial piping and pipelines» CEN/TC 67 Date: 016-09-7 Assistant: Patricia DUFOUR Direct line: + (0)1 7 17 67 8 p.dufour@unm.fr Doc. Number: N 1069 Your contact: Patrick AMESLON Direct line: + (0)1
More informationBUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS Scope EXECUTIVE SUMMARY Safety and control devices for equipment burning gaseous or
More informationCEN/TC 442 Decisions taken /16
CEN/TC 442 Building Information Modelling (BIM) CEN/TC 442 Decisions taken 2016-02-15/16 Date: 2016-02-16 Secretariat Reference: CEN/TC 442 N065 SN (Norway) Lisbet Landfald e-mail: lla@standard.no Direct
More informationBUSINESS PLAN CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 162 Business Plan Page: 1 CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY Business Environment CEN/TC 162 is preparing standards
More informationBUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS CEN/TC 10 Business Plan Page: 1 EXECUTIVE SUMMARY Lifts, escalators, moving walks and building hoists are essential elements in providing safe
More informationBUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY Business Environment The area of responsibility of CEN-CLC/TC 3 Quality management
More informationISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements
INTERNATIONAL STANDARD ISO 14847 First edition 1999-04-01 Rotary positive displacement pumps Technical requirements Pompes volumétriques à mouvement rotatif Prescriptions techniques A Reference number
More informationEU Best practice of Technical Committees and benefits that could be achieved
EU Best practice of Technical Committees and benefits that could be achieved Ian Greensmith Senior Standards Expert Brussels, 29 th of January 2013 www.inogate.org What is a standard? Standard: document,
More informationBUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION CEN/TC 305 Business Plan Page: 1 Business environment, benefits and priorities EXECUTIVE SUMMARY CEN/TC 305
More informationISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials
INTERNATIONAL STANDARD ISO 3452-2 First edition 2000-04-01 Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials Essais non destructifs Examen par ressuage Partie 2: Essais des
More informationEUROPEAN COMMISSION DIRECTORATE-GENERAL III INDUSTRY Industrial affairs II: Capital goods industries Construction M/110
EUROPEAN COMMISSION DIRECTORATE-GENERAL III INDUSTR Industrial affairs II: Capital goods industries Construction M/0 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED
More informationOn , CCMC received a proposal from DIN for the creation of a new Technical Committee in the area of Food Authenticity (see Annex 1).
BT N 11281 Draft BT C143/2018 TECHNICAL BOARD CEN/BT by correspondence For vote Issue date: 2018-08-22 According to IR2 Clause 6.1.4 Deadline: 2018-11-20 SUBJECT Establishment of a new TC on Food authenticity
More informationBUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY
Page: 1 Business environment BUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY The 5 standards published by CEN/TC 208 since 1996 are used throughout the
More informationCEN System - Delegated Decisions Dispatch 9:2017
CEN System - Delegated Decisions Dispatch 9:2017 DDD 9 2017 2017-02-27 Page 1 CEN/TC 19... 1 CEN/TC 54... 5 CEN/TC 89... 6 CEN/TC 102... 8 CEN/TC 136... 10 CEN/TC 140... 12 CEN/TC 150... 16 CEN/TC 155...
More informationBUSINESS PLAN CEN/TC 249 PLASTICS
Page: 1 BUSINESS PLAN CEN/TC 249 PLASTICS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal, societal and/or
More informationWORK PACKAGE 4 DELIVERABLE D.T4.1.4
WORK PACKAGE 4 DELIVERABLE D.T4.1.4 Strategy to facilitate the integration of Dynamic Lighting into EN 13201 and related regulations Version 1 10-2017. 1. Introduction According to the Technical Report
More informationBUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY Business environment Products Personal fall arresting systems and components Personal equipment
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60730-2-13 Edition 3.0 2017-10 Automatic electrical controls INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 97.120 ISBN 978-2-8322-4900-0 Warning! Make sure that you obtained
More informationCEN/TC 12. and ISO TC67 SC4 Plenary meeting in PAU (2004)
ISO/TC 67/SC 4 N 282 CEN/TC 12 and ISO TC67 SC4 Plenary meeting in PAU (2004) 12/13 May 2004 1 1 CEN TC12 AND ISO TC67 CEN TC12 is acting according to the goal of the Industry: GLOBAL STANDARDS USED LOCALLY
More informationBUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY Business Environment Nearly almost 100% of the 450 M European people are supplied with drinking water (DW) Europe represents approximately
More informationThis document is a preview generated by EVS
CEN WORKSHOP CWA 15374 August 2005 AGREEMENT ICS 37.100.01 English version Security Management System for suppliers to secure printing industry This CEN Workshop Agreement has been drafted and approved
More informationBUSINESS PLAN. CEN/TC 444 Test methods for environmental characterization of solid matrices
Page: 1 BUSINESS PLAN CEN/TC 444 Test methods for environmental characterization of solid matrices EXECUTIVE SUMMARY Scope Standardization of test methods for the environmental characterization of soil,
More informationBUSINESS PLAN. CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
Business Environment BUSINESS PLAN CEN/TC 137 Business Plan Date: 01.09.04 Version: 2 Approved BP Page: 1 CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
More informationStandardization in the Construction Sector Sustainability assessment and Environmental Product Declarations
Standardization in the Construction Sector Sustainability assessment and Environmental Product Declarations Gonçalo Ascensão 16 October 2014 ECO Platform EPD European Standardization Organizations (ESOs)
More informationBUSINESS PLAN CEN/TC 231 MECHANICAL VIBRATION AND SHOCK EXECUTIVE SUMMARY
Business Environment BUSINESS PLAN CEN/TC 231 MECHANICAL VIBRATION AND SHOCK EXECUTIVE SUMMARY CEN/TC 231 Business Plan Page: 1 In Europe, a large number of machines generating exposure to mechanical hand-arm-vibration
More informationRelevance of standards for tractors and agricultural machinery. Antoon Vermeulen, CNH Belgium N.V. June pages
Relevance of standards for tractors and agricultural machinery Antoon Vermeulen, CNH Belgium NV June 2012 12 pages Standards in the legislation of the EU New Approach legislation in the European Union
More informationEUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE
TC62/SEC1015/INF October 2009 EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE SOFTWARE AND MEDICAL DEVICES WORKING
More informationCEN/TC 151 N 800. N 800 CEN TC 396 Activity report. Date of document Expected action
CEN/TC 151 N 800 CEN/TC 151 Construction equipment and building material machines - Safety E-mail of Secretary: rene.kampmeier_vdma.org@livelink.din.de Secretariat: DIN N 800 CEN TC 396 Activity report
More informationConfused by standards Standards for social alarms
Confused by standards Standards for social alarms Chris Dodd Strategic Development Director Chair of the BSI Technical Committee for Social Alarms Convenor (Chair) of the CENELEC technical committee for
More informationFINAL DRAFT FprEN
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM FINAL DRAFT FprEN 16510-2-2 January 2016 ICS 97.100.30 Will supersede EN 13229:2001 English Version Residential solid fuel burning s - Part 2-2: Inset
More informationCEN strategies and plans for a global acceptance of the Eurocodes
CEN strategies and plans for a global acceptance of the Eurocodes Gonçalo Ascensão 5th December 2013 Adoption of the Eurocodes in the Balkan Region European Standardization System Links to legislation
More informationCEN/TC 442. Building Information Modelling REPORT TO ACE BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442
CEN/TC 442 Building Information Modelling REPORT TO ACE BRUSSELS 2017-11-01 ØIVIND ROOTH, CHAIR CEN/TC442 Norwegian leadership in CEN and ISO 2 2 New structure decided in CEN/TC442 plenary meeting in Dublin
More informationBUSINESS PLAN CEN/TC 215 RESPIRATORY AND ANAESTHETIC EQUIPMENT EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 215 RESPIRATORY AND ANAESTHETIC EQUIPMENT Business environment EXECUTIVE SUMMARY The following European Council New Approach directive and regulation are relevant to the work
More informationCEN/TC 229 "Precast concrete products CEN/TC 229 N nd meeting of CEN/TC (Oslo) Draft agenda Revision 1
AFNOR-NORMALISATION Unit Construction and Water Cycle Department CEN/TC 229 Secretariat Your correspondent : Jean-Claude HESLING direct line : +33 (0)1 41 62 83 93 jeanclaude.hesling@afnor.org Secretary
More informationThe European Standardization System. Diana Dus Programme Manager International Cooperation
The European Standardization System Diana Dus Programme Manager International Cooperation The European Standardization Organizations (ESOs) CEN... (European Committee for Standardization) CENELEC... (European
More informationISO/TC 215 N RESOLUTIONS ISO TC215 Liverpool 10 Nov 2017 v2. Date of document: Expected action: Background:
ISO/TC 215 N 2473 ISO/TC 215 Health informatics Email of secretary: Diana.warner@ahima.org Secretariat: ANSI (United States) RESOLUTIONS ISO TC215 Liverpool 10 Nov 2017 v2 Document type: Resolution Date
More informationRequest for tender regarding the validation of ammonia testing methods as supplement to pren 16516
Secretariat: Nederlands Normalisatie-instituut doc.nr. Vlinderweg 6 P.O. Box 5059 2623 AX DELFT 2600 GB DELFT date The Netherlands The Netherlands 2015-10-01 Telephone: +31 15 2 690 280 CEN/TC 351 N 0644
More informationRevision process of EN 45545
Second International Conference MODERN TRENDS OF FIRE PROTECTION IN ROLLING STOCK 25 of June, Warsaw Revision process of EN 45545 Jolanta Maria RADZISZEWSKA-WOLIŃSKA Materials used in the presentation:
More informationISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements
INTERNATIONAL STANDARD ISO 14847 First edition 1999-04-01 Rotary positive displacement pumps Technical requirements Pompes volumétriques à mouvement rotatif Prescriptions techniques A Reference number
More informationBUSINESS PLAN CEN/TC 191 FIXED FIREFIGHTING SYSTEMS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 191 FIXED FIREFIGHTING SYSTEMS CEN/TC 191 Business Plan Date: 2005-09-07 Version: 2 Approved BP Page: 1 EXECUTIVE SUMMARY Business Environment TC191 is responsible for standardization
More informationBUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY Pumps are widely used in industry and facilities applications at a worldwide level. European pumps production represents a prime part of of the
More informationBUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY Business Environment Europe represents about 20% of vehicles of the world market. However the automotive industry is acting globally, the
More informationEN transition from BS 1387 Structural & Conveyance Business
Corus Tubes EN 10255 transition from BS 1387 Structural & Conveyance Business EN 10255 A smooth transition with Corus Install Contents 1 Introduction 2 The new standard 4 Detailed comparison 7 Comparison
More informationcooperation in standardization Gonçalo Ascensão Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012
Perspectives and benefits of international cooperation in standardization Gonçalo Ascensão ç Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012 CEN & CENELEC systems Links to legislation
More informationBUSINESS PLAN CEN/TC 142 WOODWORKING MACHINES SAFETY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 142 WOODWORKING MACHINES SAFETY EXECUTIVE SUMMARY Business environment largest in the world, covering more than 50% of the world market. CEN TC 142 activity deals with standardization
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-30 Edition 5.0 2009-11 Household and similar electrical appliances Safety Part 2-30: Particular requirements for room heaters INTERNATIONAL ELECTROTECHNICAL COMMISSION
More informationBUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY Business Environment Europe represents approximately 28,6 % of the world market. The parties involved are: - manufacturers of industrial
More informationThis is a preview - click here to buy the full publication
TECHNICAL REPORT IEC TR 60601-4-2 Edition 1.0 2016-05 colour inside Medical electrical equipment Part 4-2: Guidance and interpretation Electromagnetic immunity: performance of medical electrical equipment
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60601-2-13 Third edition 2003-05 Medical electrical equipment Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems Appareils électromédicaux
More informationISO INTERNATIONAL STANDARD. Clothing for protection against infectious agents Test method for resistance to dry microbial penetration
INTERNATIONAL STANDARD ISO 22612 First edition 2005-03-01 Clothing for protection against infectious agents Test method for resistance to dry microbial penetration Vêtements de protection contre les agents
More informationImplementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -
TF N 687rev1 2015-06-02 CONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA - 1 I - Drafting
More informationCEN/TC 275. Secretariat of CEN/TC 275. Resolutions of the 16 th meeting of CEN/TC 275 in Berlin on 3 rd and 4 th July 2006
2006-07-24 CEN/TC 275 N 0360 "Food analysis Horizontal methods" Secretariat of CEN/TC 275 Carola Seiler DIN Deutsches Institut für Normung e.v. D-10772 Berlin International +49 30 26 01-21 98 International
More informationTo the Members of CEN/TC 250 Structural Eurocodes
Document: CEN/TC 250 N 1250 Date: 31 August 2018 To the Members of CEN/TC 250 Structural Eurocodes N 1250 POLICY GUIDELINES AND PROCEDURES (Version 7a) Note 1 This document provides the policy guidelines
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15027-3 Second edition 2012-11-01 Immersion suits Part 3: Test methods Combinaisons de protection thermique en cas d immersion Partie 3: Méthodes d essai Reference number ISO
More informationTrade of Plumbing. Module 2: Domestic Hot and Cold Water Service Unit 11: Sanitary Appliances Phase 2
Trade of Plumbing Module 2: Domestic Hot and Cold Water Service Unit 11: Sanitary Appliances Phase 2 Table of Contents List of Figures... 4 List of Tables... 5 Document Release History... 6 Module 2 Domestic
More informationFAQs Radio Equipment Directive (RE-D)
FAQs Radio Equipment Directive (RE-D) What is the objective of the RE-D? The Radio Equipment Directive (2014/53/EU) was adopted in 2014 and Member States had to transpose it into their national law before
More informationBUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY Business Environment Standardization of welding by all processes, as well as allied processes; these standards include terminology,
More informationBUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS
Page:1 BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal,
More informationISO INTERNATIONAL STANDARD. Packaging Tactile warnings of danger Requirements. Emballages Indications tactiles de danger Exigences
INTERNATIONAL STANDARD ISO 11683 Second edition 1997-10-01 Corrected and reprinted 1998-09-01 Packaging Tactile warnings of danger Requirements Emballages Indications tactiles de danger Exigences A Reference
More informationISO Clean Version of Revised Working Draft (N 348)
ISO/TC 145/SC 2/WG 1 N 358 Date: 2006-05-29 Source: ISO/TC 145/SC 2/WG 1 Secretariat Project: ISO 23601 Status: 20.20 (WD study initiated) Requested action: for information Distribution: Members of ISO/TC
More informationMandate M/118 WASTE WATER ENGINEERING PRODUCTS
Mandate M/118 Page 1 sur 13 Mandate M/118 TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON CReatE RELATED TO THE FOLLOWING END USES 18/33 : DRAINAGE (INC. HIGHWAS)
More informationReport on the activities of the ATEX consultant. Xavier Lefebvre. Contract : CENELEC/NA Consultant/2013-1
Report on the activities of the ATEX consultant Xavier Lefebvre Contract : CENELEC/NA Consultant/2013-1 Period covered: from 1 January 2013 to 1 July 2013 1. Attended meetings Date Subject Location 2013.01.28
More informationA Notification under Article 12 of Regulation (EU) No 1025/2012 1
EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Sustainable Growth and EU 2020 Standards for Boosting Competitiveness Brussels, 02/07/2014 A Notification under Article 12 of Regulation
More informationISO INTERNATIONAL STANDARD. Footwear Test methods for whole shoe Washability in a domestic washing machine
INTERNATIONAL STANDARD ISO 19954 First edition 2003-10-01 Footwear Test methods for whole shoe Washability in a domestic washing machine Chaussures Méthodes d'essai s'appliquant à la chaussure entière
More informationUpdate on European Standardization Work
Update on European Standardization Work 16th International Water Mist Conference 21st & 22nd September 2016 in Vienna, Austria Joachim Böke Minimax Viking GmbH Industriestraße 10/12 23840 Bad Oldesloe
More information1. Terms defined in the Construction Products Regulation (CPR)
CEN/TC 351 Glossary of relevant terms related to the CPR The following list of terms provides definitions of terms related to the CPR (EU/305/2011) which are relevant for the work of CEN/TC 351 Construction
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-60 Third edition 2002-11 Household and similar electrical appliances Safety Part 2-60: Particular requirements for whirlpool baths Appareils électrodomestiques et analogues
More informationWhy participate in standardization work?
1 Why participate in standardization work? Morten Seljeskog / Morten.Seljeskog@sintef.no SINTEF Energi AS/SINTEF Energy Research, Kolbjørn Hejesvei 1a, 7465 TRONDHEIM Tel: +47 73 59 37 29 / Cell: +47 901
More informationReport. CEN/TC 55 Dentistry
Date 2009-03-30 CEN/TC 55 N 562 Report of the Plenary meeting of CEN/TC 55 Dentistry held on 2009-03-03 in Bratislava Contents 1 Opening of the meeting...3 2 Roll call of delegates...3 3 Adoption of the
More informationISO INTERNATIONAL STANDARD. Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General
INTERNATIONAL STANDARD ISO 15875-1 First edition 2003-12-01 Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General Systèmes de canalisations en plastique
More informationAS/NZS IEC :2016
AS/NZS IEC 60601.2.2:2016 (IEC 60601-2-2, Ed.5.0 (2009) IEC 60601-2-2:2009/COR1:2014, IDT) Australian/New Zealand Standard Medical electrical equipment Part 2.2: Particular requirements for the basic safety
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61784-5-14 Edition 1.0 2010-07 colour inside Industrial communication networks Profiles Part 5-14: Installation of fieldbuses Installation profiles for CPF 14 IEC 61784-5-14:2010(E)
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-13 Edition 6.0 2009-12 Household and similar electrical appliances Safety Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances INTERNATIONAL
More informationFINAL DRAFT INTERNATIONAL STANDARD
IEC 62443-4-1 Edition 1.0 2017-11 FINAL DRAFT INTERNATIONAL STANDARD colour inside Security for industrial automation and control systems Part 4-1: Secure product development lifecycle requirements INTERNATIONAL
More informationThe term of the incumbent chairperson of ISO/TC 135/SC 3, Mr. Udo Schlengermann expires at the end of year 2013.
ISO/TC 135 N 476 Non-destructive testing Our Date: 2013-10-15 Number of Pages:9 (Incl. this page.) To: Cc : ISO Central Secretariat P-members and O-members of ISO/TC 135 Chairmen and Secretaries of ISO/TC
More informationInfrastructure charges
Infrastructure charges www.dwrcymru.com www.dwrcymru.com PAB 0017 (1) Introduction When a supply to a new or converted property is requested, Dŵr Cymru Welsh Water are required to impose a duty, to increase
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13938-1 First edition 1999-08-01 Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension Textiles Propriétés
More informationDraft minutes of the meeting of
Date 2013-07-18 CEN/TC 226/WG 3 N 148 "Vertical signs" Draft minutes of the meeting of CEN/TC 226/WG 3 "Vertical signs on 2013-05-23 in Bergisch-Gladbach participants: Name Richard Adam Christian Bargen
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13310:2003 Köögivalamud. Funktsionaalsed nõuded ja katsemeetodid Kitchen sinks - Functional requirements and test methods EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13937-2 First edition 2000-04-01 Textiles Tear properties of fabrics Part 2: Determination of tear force of trousershaped test specimens (Single tear method) Textiles Propriétés
More informationMedical electrical equipment
AS IEC 60601.1.12:2017 IEC 60601-1-12:2014 AS IEC 60601.1.12:2017 Medical electrical equipment Part 1.12: General requirements for basic safety and essential performance Collateral Standard: Requirements
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16244 April 2018 ICS 91.040.10; 91.140.30 English Version Ventilation in hospitals - Coherent hierarchic structure and common
More informationFinal Business Plan for a CEN Workshop on
1/6 Final for a CEN Workshop on Humanitarian Mine Action - Test and evaluation - Metal detectors - Part 2: Soil characterisation for metal detector and ground penetrating radar performance TABLE OF CONTENTS
More informationWG IV/ CEN/TC 251 WG IV. HEALTH INFORMATICS - Technology for Interoperability SECRETARIAT: S&SSP at NHSIA
WG IV/ Saved: 13 October 2003 N03-08 Page 1 of 5 CEN/TC 251 WG IV HEALTH INFORMATICS - Technology for Interoperability SECRETARIAT: S&SSP at NHSIA TITLE/ SUBJECT: SOURCE: WGIV and ISO TC215 WG2.1 (devices)
More informationDenmark SECRETARY:
NEW WORK ITEM PROPOSAL (NP) PROPOSER: DATE OF PROPOSAL: Denmark 2017-10-26 DATE OF CIRCULATION: CLOSING DATE FOR VOTING: 2017-11-03 2018-01-26 IEC TC 61 : SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES
More informationAbout European Standards
About European Standards Aquaculture workshop Brussels, Centre Borschette 2017-04-27 Andrea NAM 1 Actors in standardization The European Standardization Organizations (ESOs) The Regional Standardization
More informationBUSINESS PLAN. CEN/TC 336 BITUMINOUS BINDERS Version 2018 EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 336 BITUMINOUS BINDERS Version 2018 EXECUTIVE SUMMARY BUSINESS ENVIRONMENT The parties interested in the bituminous binder market are the following industries: - the bituminous
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1555-7 April 2003 ICS 23.040.01; 91.140.40 English version Plastics piping systems for the supply of gaseous fuels - Polyethylene
More informationSecurity Standardisation - Mandate M/487 Jolien van Zetten
Security Standardisation - Mandate M/487 Jolien van Zetten Agenda Standardisation What is it? How does it work? Mandate M/487 to develop security standards Overview Results - CBRNE Relation standardisation
More information