Explosion Proof C1D2 0-10V Dimmable LED Fixture - 4ft 2 Lamp - Emergency Ballast - Terminal Strips

Size: px
Start display at page:

Download "Explosion Proof C1D2 0-10V Dimmable LED Fixture - 4ft 2 Lamp - Emergency Ballast - Terminal Strips"

Transcription

1 Explosion Proof C1D2 0-10V Dimmable LED Fixture - 4ft 2 Lamp - Emergency Ballast - Terminal Strips Part #: HAL-EMG-48-2L-LED-D-V2 Page: 1

2 Made in the USA The Larson Electronics HAL-EMG-48-2L-LED-D-V2 Hazardous Area Dimmable LED Light Fixture is U.S./Canada U.L. approved Class 1 Division 2 Groups A, B, C and D - UL 1598A listed, has a T4C temperature rating and ideal for open air hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered. This dimmable C1D2 light fixture is compatible with 0-10V dimmer switches, and contains internal terminal strips for wiring multiple fixtures in series. The HAL-EMG-48-2L-LED-D-V2 fixture is a 4 foot long, 2 lamp, UL listed Class I Division 2 Groups A, B, C and D hazardous area dimmable LED light that takes the reliability and efficiency of a fluorescent fixture and adds even longer lamp life and efficiency with high output LEDs. This fixture is T4C temperature rated and comes standard with our high power 28 watt dimmable LED lamps that each produce 2,875 lumens. The lamps are protected by an aluminum framed hinged glass door secured with four turn latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. A factory installed terminal strip within the light fixture allows operators to wire multiple fixtures in series, reducing installation cost. The internal terminal strip accounts for dimming control wires (violet/grey) for dimming multiple fixtures in series from a single switch. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. This fixture can be configured to run on voltages from V AC and is U.L. 595 and UL 1598A Marine Type approved for use marine environments. The HAL-EMG-48-2L-LED-D-V2 is weatherproof and provides operators in hazardous locations with a highly efficient, reliable and affordable lighting solution for open areas where flammable chemicals and vapors my occasionally be present. This LED light fixture features 0-10V dimming capabilities. This gives operators the ability to manually adjust the brightness of the LED lamp quickly and easily. The 0-10V dimming allows for adjustments to fit the brightness needs of any lighting situation. A 0-10V dimmable light works through the use of a DC control signal that ranges between zero and ten volts. The basic idea is that at 10 volts of input the light is at its brightest level with 0 volts being the lowest possible dimness setting. The smooth, continuous and flicker-free dimming of a 0-10V dimmable LED light is ideal for a wide range of different lighting applications. This dimmable LED light works operates as a standard light fixture during normal operation while line voltage is present. The main difference is that we add a battery backup unit that adds emergency light functionality to the fixture. This hazardous area emergency light will run one bulb at the standard UL suggested 90+ minutes after power is lost. The light recharges the battery once electrical power is restored. The battery backup unit includes a switched leg for turning the light fixture on/off without kicking the unit into emergency mode. Emergency mode will operate regardless of if the fixture is turned on or off. A test switch can be installed for routine testing. Page: 2

3 Click Photo to Enlarge Click Photo to Enlarge Surface Mount Pendant Mount Page: 3

4 We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight, increases lamp life to an extreme 50,000 hours and helps this LED fixture maintain a T-4C temperature rating. The solid state design of the included LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T5-bulbs. The 28 watt LED lamps produce more illumination than standard T5 bulbs, but draw only 1/2th of the current. The current generation of Larson Electronics LED T-series style bulbs produce 15% more light than standard T5 bulbs. Standard Surface Mount Brackets: Each L bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. Mounting brackets are removable. A single through hole enables the operator to install the light to any surface. A sliding bracket mount is available so operators can retrofit this LED light fixture to use the per-existing mounting holes from other fluorescent fixtures. Contact us for the sliding bracket option. Suggested Applications:Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Chemical manufacturing, Waste treatment plants, Gas processing plants. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since Contact us today at or message sales@larsonelectronics.com for more information about our custom options tailored to meet your specific industry needs. Made in USA Quality Superior LED Benefits 1. 50,000 hour lifespan. 2. Can SAVE 50% or more on energy. 1. Each unit dielectrically tested. 3. Qualifies retrofit projects for financial incentives, including utility 2. Fixture arrives assembled and lamped to reduce installation time and rebates, tax credits and energy loan programs. cost. Adjustable mounting brackets enable the operator to choose any 4. Reduces energy use and prolongs life-spans of peripheral cooling mounting angle for the fixture, where other models may only offer one units (A/C, refrigeration) or three choices % recyclable. 3. Fixture constructed of extruded corrosion resistant copper free 6. No toxins-lead, mercury. aluminum alloy. 7. No UV light, infrared radiation or CO2 emissions. 4. Relamping done via 4 turn latches, which enable the operator to 8. Qualifies buildings for LEED and other sustainable business unlatch the hinged door and access the lamps. certifications. 5. Heavy gauge extruded aluminum reflectors with high gloss reflective 9. Bright, even light maintains consistent color over time. finish. Resists dents and corrosion. 10. Instant on/off - No flickering, delays or buzzing. 6. 1/2" or 3/4", threaded access hole for wiring conduit. 11. Very good color rendering. 7. Units can be wired end to end in series. Internal terminal strip allows 12. Vibration/impact resistant. operators to terminate wires within fixtures. 13. Significantly cooler operation. 14. Less frequent outages, higher output improves workplace safety. Page: 4

5 Specifications / Additional Information HAL-EMG-48-2L-LED-D-V2 Hazardous Area Listing: United States - Canada Lamp Type: 0-10V Dimmable LED Dimensions: 51.1"L x 7.06"W x 8.4"H - Surface Mount Weight: 33 Lbs Voltage: V AC, 50/60Hz Ratings Class I Division 2, Groups A, B, C and D UL 595 Outdoor Marine Type (Saltwater) UL 1598A Marine Type Switch Leg for Powering Light On/Off 0-10V Dimmable Dimming: Yes V Dimmable Total Watts: 56 watts Total Lumens: 7,000 Luminous Efficacy: 125 Lm/W LED Lamp Life Expectancy: 50,000 Hours Power Efficiency: 90% Power Factor: >0.95 Color Temp: 4500K or 5600K Beam Angle: 150 Ambient Operating Temp Range:-25 C to +45 C Operating Temp Range: T4C rated Mounting: Bracket Standard, Sliding Bracket Optional Wiring Hub: 1/2" or 3/4" threaded Special Orders- Requirements Contact us for special requirements Battery Backup: 90+ minute runtime Toll Free: Warranty: YES-3 Years* Intl: U.L Approval: U.S Certificate Canada Certificate sales@larsonelectronics.com Scroll Down to Purchase- Part #: HAL-EMG-48-2L-LED-D-V2 (144257) Page: 5

6 Options: HAL-EMG-48-2L-LED-D-V2- MOUNT - COLOR TEMP - HUB SIZE Example: HAL-EMG-48-2L-LED-D-V2-SFC-3000K-0.5IN MOUNT Surface -SFC Pendant -PND COLOR TEMP 3000K -3000K 4500K -4500K 5600K 5600K HUB SIZE 1/2in -0.5IN 3/4in -0.75IN Page: 6

7 Page: 7

8 Page: 8

9 Page: 9

10 Page: 10

11 Links (Click on the below items to view): - SpecSheet Spanish - Dimensional Drawing - Manual - MSDS - Hi-Res Image 1 - Front Image of Fixture with Surface Brackets - Hi-Res Image 2 - Front of Fixture with Lens Open - Hi-Res Image 3 - Side Surface Bracket - Hi-Res Image 4 - Front of Fixture - Hi-Res Image 5 - Side Image of Fixture with Surface Mount Brackets - Hi-Res Image 6 - Close up Image of the Surface Mount Bracket - Hi-Res Image 7 - Close up Image of the Pendant Mount Wiring Hub - Hi-Res Image 8 - Back Image of Fixture for Pendant Mounting Page: 11

Class 1 Div 2 LED Pivoting Light - 2 foot 2 lamp - LED T series Style V Dimmable

Class 1 Div 2 LED Pivoting Light - 2 foot 2 lamp - LED T series Style V Dimmable Class 1 Div 2 LED Pivoting Light - 2 foot 2 lamp - LED T series Style - 0-10V Dimmable Part #: HAL-24-2L-LED-BMSW-D-V2 Page: 1 Made in the USA The Larson Electronics HAL-24-2L-LED-BMSW-D-V2 Hazardous Area

More information

48W Fluorescent T8 Light w/ Emergency Backup Dimmable Ballast - (2) 2 Foot T8 Lamps - C1D2

48W Fluorescent T8 Light w/ Emergency Backup Dimmable Ballast - (2) 2 Foot T8 Lamps - C1D2 48W Fluorescent T8 Light w/ Emergency Backup Dimmable Ballast - (2) 2 Foot T8 Lamps - C1D2 Part #: HAL-EMG-24-2L-T8-D Page: 1 Made in the USA The Larson Electronics HAL-EMG-24-2L-T8-D Hazardous Area Fluorescent

More information

Explosion Proof Emergency Fluorescent Light Combination - Dimmable Ballast - C1D1-2 T8 lamps - 4'

Explosion Proof Emergency Fluorescent Light Combination - Dimmable Ballast - C1D1-2 T8 lamps - 4' Explosion Proof Emergency Fluorescent Light Combination - Dimmable Ballast - C1D1-2 T8 lamps - 4' Part #: EPL-EMG-48-2L-T8-D Made in the USA The Larson Electronics EPL-EMG-48-2l-T8-D Explosion Proof Emergency

More information

Explosion Proof LED Light - Equivalent to Watt HID C1D2, UL Listed

Explosion Proof LED Light - Equivalent to Watt HID C1D2, UL Listed Explosion Proof LED Light - Equivalent to 150-175 Watt HID C1D2, UL Listed Part #: EPLC2-LED-175W Page: 1 Made in the USA The Larson Electronics explosion proof LED is designed for use in hazardous work

More information

80W C1D2 Hazardous Location Integrated LED - Corrosion Resistant for Marine - Emergency Backup

80W C1D2 Hazardous Location Integrated LED - Corrosion Resistant for Marine - Emergency Backup 80W C1D2 Hazardous Location Integrated LED - Corrosion Resistant for Marine - Emergency Backup Part #: HALP-EMG-48-2L-ITG-LED-V2 Page: 1 Made in Texas The Larson Electronics HALP-EMG-48-2L-ITG-LED-V2 Hazardous

More information

25W Hazardous Location Integrated LED Light Fixture Lumens - Low Profile - ATEX IEC CSA UL

25W Hazardous Location Integrated LED Light Fixture Lumens - Low Profile - ATEX IEC CSA UL 25W Hazardous Location Integrated LED Light Fixture - 3294 Lumens - Low Profile - ATEX IEC CSA UL Part #: HAL-19-25W-ITG-LED Page: 1 The Larson Electronics HAL-19-25W-ITG-LED 25 Watt Explosion Proof Low

More information

C1D1 Explosion Proof 50W LED Flood Light Fixture - Paint Spray Booth Approved - Adj Surface Mount

C1D1 Explosion Proof 50W LED Flood Light Fixture - Paint Spray Booth Approved - Adj Surface Mount C1D1 Explosion Proof 50W LED Flood Light Fixture - Paint Spray Booth Approved - Adj Surface Mount Part #: EPL-LED-50W-RT-JB2 Page: 1 The Larson Electronics EPL-LED-50W-RT-JB2 Explosion Proof High Bay light

More information

C2D1/C1D2 Explosion Proof 50 Watt LED Light Fixture - Paint Spray Booth Approved - 6,250 Lumens

C2D1/C1D2 Explosion Proof 50 Watt LED Light Fixture - Paint Spray Booth Approved - 6,250 Lumens C2D1/C1D2 Explosion Proof 50 Watt LED Light Fixture - Paint Spray Booth Approved - 6,250 Lumens Part #: EPLC2-HB-50LED-RT Page: 1 The Larson Electronics EPLC2-HB-50LED-RT Explosion Proof High Bay light

More information

150W Explosion Proof High Bay LED Light Fixture - C1D1&2 - C2D1&2-17,500 Lumens - 60 Beam

150W Explosion Proof High Bay LED Light Fixture - C1D1&2 - C2D1&2-17,500 Lumens - 60 Beam 150W Explosion Proof High Bay LED Light Fixture - C1D1&2 - C2D1&2-17,500 Lumens - 60 Beam Part #: EPLC2-HB-155W-LED-PND Page: 1 The Larson Electronics EPLC2-HB-155W-LED-PND Explosion Proof High Bay light

More information

26 Watt Explosion Proof Low Profile LED Fixture - 3,380 Lumens - Class 1 & 2 Div 1 & 2 - ATEX / IECE

26 Watt Explosion Proof Low Profile LED Fixture - 3,380 Lumens - Class 1 & 2 Div 1 & 2 - ATEX / IECE 26 Watt Explosion Proof Low Profile LED Fixture - 3,380 Lumens - Class 1 & 2 Div 1 & 2 - ATEX / IECE Part #: EPL-LP-12-LED Page: 1 The EPL-LP-12-LED from Larson Electronics is a Low Profile Explosion Proof

More information

300W Low Profile Clean Room LED Light - LED Signal Light - C1D1 - C2D2 - ISO 14644/FS-209E Rated

300W Low Profile Clean Room LED Light - LED Signal Light - C1D1 - C2D2 - ISO 14644/FS-209E Rated 300W Low Profile Clean Room LED Light - LED Signal Light - C1D1 - C2D2 - ISO 14644/FS-209E Rated Part #: HALD-48-2X150LED-V2-C-OXM Page: 1 Made in Texas The HALD-48-2X150LED-V2-C-OXM from Larson Electronics

More information

208W Explosion Proof Low Profile LED - Emergency Backup - 27,040 Lumens - C1&2 D1&2 - ATEX /IEC

208W Explosion Proof Low Profile LED - Emergency Backup - 27,040 Lumens - C1&2 D1&2 - ATEX /IEC 208W Explosion Proof Low Profile LED - Emergency Backup - 27,040 Lumens - C1&2 D1&2 - ATEX /IEC Part #: EPL-EMGX-LP-2X48-LED Page: 1 The Larson Electronics EPL-EMGX-LP-2X48-LED Low Profile Explosion Proof

More information

4' 2 Lamp Fluorescent Light Fixture - Emergency Battery Backup - T8 Bulbs - Multi-voltage - CID2

4' 2 Lamp Fluorescent Light Fixture - Emergency Battery Backup - T8 Bulbs - Multi-voltage - CID2 4' 2 Lamp Fluorescent Light Fixture - Emergency Battery Backup - T8 Bulbs - Multi-voltage - CID2 Part #: HALS-EMG-48-2L-T8 Made in the USA The Larson Electronics HALS-EMG-48-2L-T8 Hazardous Area Fluorescent

More information

25W Explosion Proof Surface Mount LED Light - C1D1-2 - C2D1-2 - Aluminum Frame V AC

25W Explosion Proof Surface Mount LED Light - C1D1-2 - C2D1-2 - Aluminum Frame V AC 25W Explosion Proof Surface Mount LED Light - C1D1-2 - C2D1-2 - Aluminum Frame - 120-277V AC Part #: EXHL-TRN-LE1-1227 Page: 1 Made in Texas The EXHL-TRN-LE1-1227 from Larson Electronics is an Explosion

More information

Vaporproof White LED Light - 10 Watts - Non-Metallic - Corrosion Resistant Lumens

Vaporproof White LED Light - 10 Watts - Non-Metallic - Corrosion Resistant Lumens Vaporproof White LED Light - 10 Watts - Non-Metallic - Corrosion Resistant - 1050 Lumens Part #: VPLED-CRNM-LED10W Page: 1 Made in the USA The VPLED-CRNM-LED10W Vaporproof White LED Light from Larson Electronics

More information

Hazardous Location LED Pivoting Light - C1D2 - Dimmable - Modbus TCP/IP Network - Meets USCG Specs

Hazardous Location LED Pivoting Light - C1D2 - Dimmable - Modbus TCP/IP Network - Meets USCG Specs Hazardous Location LED Pivoting Light - C1D2 - Dimmable - Modbus TCP/IP Network - Meets USCG Specs Part #: HALP-ANC-48-2L-LED-D-V2 Page: 1 Made in the USA The Larson Electronics HALP-ANC-48-2L-LED-D-V2

More information

100W Explosion Proof Ultraviolet Portable LED Fixture - 365NM - EXP Cord Caps - 150ft Cord

100W Explosion Proof Ultraviolet Portable LED Fixture - 365NM - EXP Cord Caps - 150ft Cord 100W Explosion Proof Ultraviolet Portable LED Fixture - 365NM - EXP Cord Caps - 150ft Cord Part #: EPL-PM-100LED-UVA-150-EPP Page: 1 The EPL-PM-100LED-UVA-150-EPP from Larson Electronics is an Explosion

More information

Hazardous Area LED Light -Class 1 Div 2 Groups A, B, C, D and Class 2 Div 2 F,G - 4' 4 lamp

Hazardous Area LED Light -Class 1 Div 2 Groups A, B, C, D and Class 2 Div 2 F,G - 4' 4 lamp Hazardous Area LED Light -Class 1 Div 2 Groups A, B, C, D and Class 2 Div 2 F,G - 4' 4 lamp Part #: HALS-48-4L-LED Made in Texas The Larson Electronics HAL-48-4L-LED Hazardous Area LED Light Fixture is

More information

Dimmable General Area Use High Bay 320 Watt LED Light Fixture - Low Profile - High Efficiency

Dimmable General Area Use High Bay 320 Watt LED Light Fixture - Low Profile - High Efficiency Dimmable General Area Use High Bay 320 Watt LED Light Fixture - Low Profile - High Efficiency Part #: GAU-48-320W-LED-DIMM Page: 1 The Larson Electronics GAU-48-320W-LED-DIMM Dimmable General Use High

More information

Explosion Proof 70 Watt Low Profile LED Light Fixture Lumens - C1D1 Group B - Hydrogen Rated

Explosion Proof 70 Watt Low Profile LED Light Fixture Lumens - C1D1 Group B - Hydrogen Rated Explosion Proof 70 Watt Low Profile LED Light Fixture - 6000 Lumens - C1D1 Group B - Hydrogen Rated Part #: EPL-LP-70W-LED-B The Larson Electronics EPL-LP-70W-LED-B Low Profile LED light fixture provides

More information

100W Explosion Proof Low Bay AC LED Fixture - C1D1 - C2D1 - Group B + ATEX/IECEX - IP67 Waterproof

100W Explosion Proof Low Bay AC LED Fixture - C1D1 - C2D1 - Group B + ATEX/IECEX - IP67 Waterproof 100W Explosion Proof Low Bay AC LED Fixture - C1D1 - C2D1 - Group B + ATEX/IECEX - IP67 Waterproof Part #: EPLX-HB-100W-RD2-LED-TRC Page: 1 The EPLX-HB-100W-RD2-LED-TRC Explosion Proof Low Bay AC LED light

More information

60W Flameproof LED Emergency Linear Fixture V AC - (2) 30W LED Lamps - ATEX/IECEx

60W Flameproof LED Emergency Linear Fixture V AC - (2) 30W LED Lamps - ATEX/IECEx 60W Flameproof LED Emergency Linear Fixture - 100-250V AC - (2) 30W LED Lamps - ATEX/IECEx Part #: ATEX-HALP-EMG-48-2L-LED-2X30W-R1-220V Page: 1 The Larson Electronics ATEX-HALP-EMG-48-2L-LED-2X30W-R1-220V

More information

Industrial 100 Watt Ultraviolet LED Light Fixture - Paint Spray Booth Approved Nanometer

Industrial 100 Watt Ultraviolet LED Light Fixture - Paint Spray Booth Approved Nanometer Industrial 100 Watt Ultraviolet LED Light Fixture - Paint Spray Booth Approved - 365 Nanometer Part #: GAU-HB-100LED-RT-UVA The Larson Electronics GAU-HB-100LED-RT-UVA Industrial Ultraviolet light fixture

More information

Low Profile Clean Room 150W LED Light - 2x2 Lay-In Troffer C1D1 - C2D2 - ISO 14644/FS-209E

Low Profile Clean Room 150W LED Light - 2x2 Lay-In Troffer C1D1 - C2D2 - ISO 14644/FS-209E Low Profile Clean Room 150W LED Light - 2x2 Lay-In Troffer - 140 - C1D1 - C2D2 - ISO 14644/FS-209E Part #: HALD-24-1X150LED-V2-140DB Page: 1 Made in the USA The HALD-24-1X150LED-V2-140DB from Larson Electronics

More information

50W Explosion Proof LED Light - C1D2, C2D1 - Replacement for 150W Metal Halide - Globe/Guard

50W Explosion Proof LED Light - C1D2, C2D1 - Replacement for 150W Metal Halide - Globe/Guard 50W Explosion Proof LED Light - C1D2, C2D1 - Replacement for 150W Metal Halide - Globe/Guard Part #: EPLC2-HHB-GG-150W-LED Page: 1 Made in the USA The Larson Electronics EPLC2-HHB-GG-150W-LED Explosion

More information

Explosion Proof UV/Visible Light Fluorescent Fixture - Paint Spray Booth, Rigs - Two Circuit Lamps

Explosion Proof UV/Visible Light Fluorescent Fixture - Paint Spray Booth, Rigs - Two Circuit Lamps Explosion Proof UV/Visible Light Fluorescent Fixture - Paint Spray Booth, Rigs - Two Circuit Lamps Part #: EPL-48-2L-T8-VISUVA Page: 1 The Larson Electronics EPL-48-2L-T8-VISUVA Explosion Proof UV/Visible

More information

50W Explosion Proof Trunnion Mount Compact LED Flood Light - C1D2, C2D1 - Paint Spray Booth Approved

50W Explosion Proof Trunnion Mount Compact LED Flood Light - C1D2, C2D1 - Paint Spray Booth Approved 50W Explosion Proof Trunnion Mount Compact LED Flood Light - C1D2, C2D1 - Paint Spray Booth Approved Part #: EPLC2-TRN-50LED-RT Page: 1 The Larson Electronics EPLC2-TRN-50LED-RT Explosion Proof compact

More information

Explosion Proof Light - Base Stand Mount - 16 Inch Watt LED - Class I Div 1 C&D

Explosion Proof Light - Base Stand Mount - 16 Inch Watt LED - Class I Div 1 C&D Explosion Proof Light - Base Stand Mount - 16 Inch - 150 Watt LED - Class I Div 1 C&D Part #: EPL-16BS-1X150LED-100 Page: 1 Made in Texas The EPL-16BS-1X150LED-100 Explosion Proof LED Light from Larson

More information

40W Explosion Proof LED Light Fixture - C1D1, C2D1-2x2 Lay-in Troffer - ATEX/ISO Rated

40W Explosion Proof LED Light Fixture - C1D1, C2D1-2x2 Lay-in Troffer - ATEX/ISO Rated 40W Explosion Proof LED Light Fixture - C1D1, C2D1-2x2 Lay-in Troffer - ATEX/ISO Rated Part #: HALD-24-1X40CPR-LED-V2 Page: 1 The Larson Electronics HALD-24-1X40CPR-LED-V2 Explosion Proof LED Fixture provides

More information

100W Portable Explosion Proof LED Light - (2) LED Lamps - Non-Spark Aluminum Base - Inline Switch

100W Portable Explosion Proof LED Light - (2) LED Lamps - Non-Spark Aluminum Base - Inline Switch 100W Portable Explosion Proof LED Light - (2) LED Lamps - Non-Spark Aluminum Base - Inline Switch Part #: EPL-BS-2X70LED-100 Page: 1 The EPL-BS-2X70LED-100 Portable Explosion Proof LED Light from Larson

More information

150 Watt Explosion Proof LED Light - 5' Tall Base Stand Mount - 24 Inch Stand - Class I Div 1 C&D

150 Watt Explosion Proof LED Light - 5' Tall Base Stand Mount - 24 Inch Stand - Class I Div 1 C&D 150 Watt Explosion Proof LED Light - 5' Tall Base Stand Mount - 24 Inch Stand - Class I Div 1 C&D Part #: EPL-24BS-5FT-1X150LED-100 Page: 1 Made in Texas The EPL-24BS-5FT-1X150LED-100 Explosion Proof LED

More information

150W Explosion Proof LED Flood Light - Surface Mount Lumens - C1D V AC

150W Explosion Proof LED Flood Light - Surface Mount Lumens - C1D V AC 150W Explosion Proof LED Flood Light - Surface Mount - 17500 Lumens - C1D1-120-277V AC Part #: EPL-LED-150W-RT Page: 1 The EPL-LED-150W-RT from Larson Electronics is an Explosion Proof High Bay LED Light

More information

Explosion Proof LED Light - Equivalent to Watt Metal Halide - Class 1 Division 2

Explosion Proof LED Light - Equivalent to Watt Metal Halide - Class 1 Division 2 Explosion Proof LED Light - Equivalent to 100-150 Watt Metal Halide - Class 1 Division 2 Part #: EPLC2-LED-150W Page: 1 Made in the USA The EPLC2-LED-150W LED hazardous area light fixture from Larson Electronics

More information

120W Explosion Proof Signal Light w/ Audible Alarm - C1D1 - (2) Colored LED Lamps - 55 Horn Tones

120W Explosion Proof Signal Light w/ Audible Alarm - C1D1 - (2) Colored LED Lamps - 55 Horn Tones 120W Explosion Proof Signal Light w/ Audible Alarm - C1D1 - (2) Colored LED Lamps - 55 Horn Tones Part #: EPL-TL-2X60.RD2-C-PA-B Made in the USA The EPL-TL-2X60.RD2-C-PA-B Explosion Proof Signal Light

More information

56W Vapor Proof LED Fixture V Dimmable - DALI Network lms - IP67 - Outdoor Applications

56W Vapor Proof LED Fixture V Dimmable - DALI Network lms - IP67 - Outdoor Applications 56W Vapor Proof LED Fixture - 0-10V Dimmable - DALI Network - 7000 lms - IP67 - Outdoor Applications Part #: GVP-ADC-48-2L-LED-D-V2 Page: 1 The Larson Electronics GVP-ADC-48-2L-LED-D-V2 Dimmable LED Light

More information

56W Hazardous Location LED Fixture - C1D2 - Stainless Steel - Dimmable - DALI Network

56W Hazardous Location LED Fixture - C1D2 - Stainless Steel - Dimmable - DALI Network 56W Hazardous Location LED Fixture - C1D2 - Stainless Steel - Dimmable - DALI Network Part #: HALSS-ADC-48-2L-LED-D-V2 Page: 1 Made in the USA The HALSS-ADC-48-2L-LED-D-V2 Hazardous Location LED Fixture

More information

150W Explosion Proof LED Light - 5' Tall Base Stand Mount - 24" Stand - Class I Div 1 C&D V

150W Explosion Proof LED Light - 5' Tall Base Stand Mount - 24 Stand - Class I Div 1 C&D V 150W Explosion Proof LED Light - 5' Tall Base Stand Mount - 24" Stand - Class I Div 1 C&D - 347-480V Part #: EPL-24BS-5FT-1X150LED-480V-100 Page: 1 Made in Texas The EPL-24BS-5FT-1X150LED-480V-100 Explosion

More information

120W Hazardous Location LED Fixture V DC - Modbus TCP/IP - Network Controlled - Dimmable

120W Hazardous Location LED Fixture V DC - Modbus TCP/IP - Network Controlled - Dimmable 120W Hazardous Location LED Fixture - 12-24V DC - Modbus TCP/IP - Network Controlled - Dimmable Part #: HAL-ANC-60-120W-ITG-LED-DIMM-1224 Page: 1 The Larson Electronics HAL-ANC-60-120W-ITG-LED-DIMM-1224

More information

Hazardous Location LED String Lights - 5 Jelly Jar Lamps - Non Metallic - Chemical Resistant - CID2

Hazardous Location LED String Lights - 5 Jelly Jar Lamps - Non Metallic - Chemical Resistant - CID2 Hazardous Location LED String Lights - 5 Jelly Jar Lamps - Non Metallic - Chemical Resistant - CID2 Part #: HAL-SL-5-LED Page: 1 Made in Texas The Larson Electronics HAL-SL-5-LED Explosion Proof LED String

More information

56W Hazardous Location LED Light - C1D2 - Corrosion Resistant for Marine - Dimmable - DALI Network

56W Hazardous Location LED Light - C1D2 - Corrosion Resistant for Marine - Dimmable - DALI Network 56W Hazardous Location LED Light - C1D2 - Corrosion Resistant for Marine - Dimmable - DALI Network Part #: HALP-ADC-48-2L-LED-D-V2 Page: 1 Made in the USA The Larson Electronics HALP-ADC-48-2L-LED-D-V2

More information

Explosion Proof 160 W Class 1 & 2 Fluorescent UV Light With 4 Lamps - Class 1 Division 1

Explosion Proof 160 W Class 1 & 2 Fluorescent UV Light With 4 Lamps - Class 1 Division 1 Explosion Proof 160 W Class 1 & 2 Fluorescent UV Light With 4 Lamps - Class 1 Division 1 Part #: EPL-48-4L-UV Page: 1 Made in the USA The Larson Electronics EPL-48-4L-UV 160 Watt Explosion Proof UV Fluorescent

More information

Industrial Horn & LED Strobe Warning System - 12V DC - Weatherproof - NEMA 4X - Class 1 Beacon

Industrial Horn & LED Strobe Warning System - 12V DC - Weatherproof - NEMA 4X - Class 1 Beacon Industrial Horn & LED Strobe Warning System - 12V DC - Weatherproof - NEMA 4X - Class 1 Beacon Part #: WAL-TL-1XCL1B-C-PA-12V Page: 1 Made in the USA The WAL-TL-1XCL1B-C-PA-12V from Larson Electronics

More information

Explosion Proof LED Strobe Light - 4Hz Flash Rate - 10 Watts - Class I, Div. I - IP67

Explosion Proof LED Strobe Light - 4Hz Flash Rate - 10 Watts - Class I, Div. I - IP67 Explosion Proof LED Strobe Light - 4Hz Flash Rate - 10 Watts - Class I, Div. I - IP67 Part #: EPSLED-80 Page: 1 Made in Texas The EPSLED-80 Explosion Proof LED Strobe Light from Larson Electronics is UL

More information

Explosion Proof Exit Sign - Class I, Division I - IP65-120V/277VAC - Emergency Battery Back-Up

Explosion Proof Exit Sign - Class I, Division I - IP65-120V/277VAC - Emergency Battery Back-Up Explosion Proof Exit Sign - Class I, Division I - IP65-120V/277VAC - Emergency Battery Back-Up Part #: EPL-EMG-EXT-3W Page: 1 Made in the USA The EPL-EMG-EXT-3W Explosion Proof LED Exit Sign with back

More information

Explosion Proof LED String Lights - 5 Hand Lamps - Class 1 & Class 2

Explosion Proof LED String Lights - 5 Hand Lamps - Class 1 & Class 2 Explosion Proof LED String Lights - 5 Hand Lamps - Class 1 & Class 2 Part #: EPL-SL-5-LED Page: 1 Made in the USA The Larson Electronics EPL-SL-5-LED Explosion Proof String Light set is U.L. approved Class

More information

300W EXP LED Light - 35,000 Lm - 3' Cart Mount - Quick Change Mount - C1D1-100' 16/3 SOOW- EXP Plug

300W EXP LED Light - 35,000 Lm - 3' Cart Mount - Quick Change Mount - C1D1-100' 16/3 SOOW- EXP Plug 300W EXP LED Light - 35,000 Lm - 3' Cart Mount - Quick Change Mount - C1D1-100' 16/3 SOOW- EXP Plug Part #: EPL-QC-16C-3FT-2X150LED-RT-100-EPP Page: 1 The EPL-QC-16C-3FT-2X150LED-RT-100-EPP Portable Explosion

More information

*RENTAL* Class 1 Division Watt Incandescent Light - Explosion Proof - Wall Mount Volts

*RENTAL* Class 1 Division Watt Incandescent Light - Explosion Proof - Wall Mount Volts *RENTAL* Class 1 Division 1 300 Watt Incandescent Light - Explosion Proof - Wall Mount - 120 Volts Part #: RNT-EPL-WM-300W-120V Made in the USA This unit is for rentals. Please scroll down for rental rates

More information

7680W Skid Mount LED Light Plant - (16) 480W LED Fixtures V AC 1-Phase - Crane Light

7680W Skid Mount LED Light Plant - (16) 480W LED Fixtures V AC 1-Phase - Crane Light 7680W Skid Mount LED Light Plant - (16) 480W LED Fixtures - 120-277V AC 1-Phase - Crane Light Part #: SMLP-16X500LTL-LED-1227 Page: 1 Made in Texas The SMLP-16X500LTL-LED-1227 Cube Mount LED Light Plant

More information

Explosion Proof Light Watt Metal Halide - Class 1 Div 1 & Class 2 Div 1

Explosion Proof Light Watt Metal Halide - Class 1 Div 1 & Class 2 Div 1 Explosion Proof Light - 400 Watt Metal Halide - Class 1 Div 1 & Class 2 Div 1 Part #: EPL-HB-400W-MH Made in the USA The EPL-HB-400W-MH metal halide, hazardous area light fixture from Larson Electronics

More information

Class 1 Division 2 Hazardous Location Stack Light - Signal Traffic Light - Multiple Lamp Colors

Class 1 Division 2 Hazardous Location Stack Light - Signal Traffic Light - Multiple Lamp Colors Class 1 Division 2 Hazardous Location Stack Light - Signal Traffic Light - Multiple Lamp Colors Part #: HAL-TL-4X10W-C-PA Made in the USA The HAL-TL-4X10W-C-PA Class 1 Division 2 LED Stack Light with Signal

More information

5mW Red Crane Warning Laser - Red Pedestrian Safety Laser - Projects Red Line on Floor - IP54

5mW Red Crane Warning Laser - Red Pedestrian Safety Laser - Projects Red Line on Floor - IP54 5mW Red Crane Warning Laser - Red Pedestrian Safety Laser - Projects Red Line on Floor - IP54 Part #: LZRWL-CRN-RED Page: 1 Buy American Compliant The LZRWL-CRN-RED Crane Warning Laser is ideal for overhead

More information

50mW Red Crane Warning Laser - Red Pedestrian Safety Laser - 120/277V AC - IP54 Rated

50mW Red Crane Warning Laser - Red Pedestrian Safety Laser - 120/277V AC - IP54 Rated 50mW Red Crane Warning Laser - Red Pedestrian Safety Laser - 120/277V AC - IP54 Rated Part #: LZRWL-CRN-RED-50MW-1227 Page: 1 Buy American Compliant The LZRWL-CRN-RED-50MW-1227 from Larson Electronics

More information

200mW Red Crane Warning Laser - Red Pedestrian Safety Laser - Projects Red Line on Floor - 250V DC

200mW Red Crane Warning Laser - Red Pedestrian Safety Laser - Projects Red Line on Floor - 250V DC 200mW Red Crane Warning Laser - Red Pedestrian Safety Laser - Projects Red Line on Floor - 250V DC Part #: LZRWL-CRN-RED-200MW-250VDC Page: 1 Buy American Compliant The LZRWL-CRN-RED-200MW-250VDC from

More information

200mW Red Crane Warning Laser - Red Pedestrian Safety Laser - Projects Red Line on Floor - 120V

200mW Red Crane Warning Laser - Red Pedestrian Safety Laser - Projects Red Line on Floor - 120V 200mW Red Crane Warning Laser - Red Pedestrian Safety Laser - Projects Red Line on Floor - 120V Part #: LZRWL-CRN-RED-200MW-120V Page: 1 Buy American Compliant The LZRWL-CRN-RED-200MW-120V from Larson

More information

160W High Intensity UV LED Light - UVA/365NM V AC - Acrylic Lens

160W High Intensity UV LED Light - UVA/365NM V AC - Acrylic Lens 160W High Intensity UV LED Light - UVA/365NM - 120-277V AC - Acrylic Lens Part #: GAU-LTL-UVA-500W-LED Page: 1 The GAU-LTL-UVA-500W-LED UV LED Flood Light offers intense UVA light output for industrial

More information

Red Crane Warning Strobe Laser - 5mW Laser - 1 Flash Per Second - Red Line on Floor - IP54-120/240

Red Crane Warning Strobe Laser - 5mW Laser - 1 Flash Per Second - Red Line on Floor - IP54-120/240 Red Crane Warning Strobe Laser - 5mW Laser - 1 Flash Per Second - Red Line on Floor - IP54-120/240 Part #: LZRWL-CRN-STRB-RED-1227 Page: 1 The LZRWL-CRN-STRB-RED-1227 Crane Warning Strobing Laser is ideal

More information

33 Watt Low Voltage LED Fixture for Hazardous Location Lighting - Low Profile Linear Fixture - C1D2

33 Watt Low Voltage LED Fixture for Hazardous Location Lighting - Low Profile Linear Fixture - C1D2 33 Watt Low Voltage LED Fixture for Hazardous Location Lighting - Low Profile Linear Fixture - C1D2 Part #: HAL-48-33W-LED Buy American Compliant The Larson Electronics HAL-48-33W-LED is a low voltage

More information

480W High Intensity LED Light - 60,000 Lumens V AC - High Mast Lighting - Pole Top Mount

480W High Intensity LED Light - 60,000 Lumens V AC - High Mast Lighting - Pole Top Mount 480W High Intensity LED Light - 60,000 Lumens - 120-277V AC - High Mast Lighting - Pole Top Mount Part #: GAU-PT-500LTL-LED Page: 1 The GAU-PT-500LTL-LED High Mast LED Flood Light offers intense light

More information

High Intensity LED Strobe Light - 10 Watt - 10~30 Volts DC - Permanent Mount - 14 Strobe Patterns

High Intensity LED Strobe Light - 10 Watt - 10~30 Volts DC - Permanent Mount - 14 Strobe Patterns High Intensity LED Strobe Light - 10 Watt - 10~30 Volts DC - Permanent Mount - 14 Strobe Patterns Part #: LEDSL-10W Page: 1 The Larson Electronics LEDSL-10W is a powerful strobing LED beacon that offers

More information

500 Watt High Mast (Stadium) LED Light - 60,000 Lumens Outdoor Rated

500 Watt High Mast (Stadium) LED Light - 60,000 Lumens Outdoor Rated 500 Watt High Mast (Stadium) LED Light - 60,000 Lumens - 120-277 - Outdoor Rated Part #: GAU-LTL-400W-LED Page: 1 The GAU-LTL-400W-LED High Mast (Stadium) LED Flood Light offers intense light output and

More information

Explosion Proof Push Button Momentary Switch - C1D1, C2D1 - Adjustable Timer - 10 sec-170 Minutes

Explosion Proof Push Button Momentary Switch - C1D1, C2D1 - Adjustable Timer - 10 sec-170 Minutes Explosion Proof Push Button Momentary Switch - C1D1, C2D1 - Adjustable Timer - 10 sec-170 Minutes Part #: EPS-PB10-MS-AT-V3 Made in the USA The Larson Electronics EPS-PB10-MS-AT-V2 Explosion Proof Push

More information

*RENTAL* Explosion Proof Portacool Portable Evaporative Cooler - C1D1 - Water Mist Cooler - 30" OD

*RENTAL* Explosion Proof Portacool Portable Evaporative Cooler - C1D1 - Water Mist Cooler - 30 OD *RENTAL* Explosion Proof Portacool Portable Evaporative Cooler - C1D1 - Water Mist Cooler - 30" OD Part #: RNT-EPF-AC-30 Page: 1 Made in the USA The RNT-EPF-AC-30 Class I Division 1 portable evaporative

More information

C1D1 Explosion Proof Horn - Industrial Siren - Programmable Timer - NEMA 4X - Weatherproof

C1D1 Explosion Proof Horn - Industrial Siren - Programmable Timer - NEMA 4X - Weatherproof C1D1 Explosion Proof Horn - Industrial Siren - Programmable Timer - NEMA 4X - Weatherproof Part #: EPSN-HRN-PA-AT-MOD1 Made in the USA The Larson Electronics EPSN-HRN-PA-AT-MOD1 Explosion Proof Horn provides

More information

Applications. Standard Materials

Applications. Standard Materials Mercmaster III Low Profile Compact Fluorescent Luminaires Compact Fluorescent listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Applications Enclosed and gasketed fixtures

More information

Explosion Proof Ventilation Fan Redirects Stale Air From Hazardous Location Areas

Explosion Proof Ventilation Fan Redirects Stale Air From Hazardous Location Areas Explosion Proof Ventilation Fan Redirects Stale Air From Hazardous Location Areas Part #: EPF30PND Page: 1 Made in the USA The Larson Electronics EPF30PND Explosion Proof Ventilator Fan / Blower safely

More information

CATALOG NUMBER NAME DESCRIPTION HTL X Keeper 2 40 Watts 120v 5000K 4,000 Lm HTL X Keeper 2 40 Watts 277v 5000K 4,000 Lm 4.

CATALOG NUMBER NAME DESCRIPTION HTL X Keeper 2 40 Watts 120v 5000K 4,000 Lm HTL X Keeper 2 40 Watts 277v 5000K 4,000 Lm 4. SPECIFICATIONS hazloclinear LIGHTING 120 & 277 Voltage KEY FEATURES Two Models: 120 vac or 277 vac. Die Cast aluminum fixture for LED heat dissipation and thermal control. 40 watts, 4000 lumens, Epistar

More information

General Purpose Ventilation Fan - Venturi-Style Blower PSIG

General Purpose Ventilation Fan - Venturi-Style Blower PSIG General Purpose Ventilation Fan - Venturi-Style Blower - 3752 CFM @ 90 PSIG Part #: GPF-3752 Page: 1 Page: 2 Made in the USA The Larson Electronics GPF-3752 General Purpose Ventilation Fan is designed

More information

MAR2 LED SERIES M A R 2 L E D. Linear LED Lighting for Hazardous Locations

MAR2 LED SERIES M A R 2 L E D. Linear LED Lighting for Hazardous Locations MAR2 LED SERIES Linear LED Lighting for Hazardous Locations Class I, Division 2, Groups A, B, C & D UL 844 Hazardous Locations UL 1598A Marine Outside Type UL 8750 LED Safety CSA C22.2 #250.0-08; CSA C22.2

More information

TROFFER RETROFIT KIT (TRK)

TROFFER RETROFIT KIT (TRK) Not all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. TROFFER RETROFIT KIT (TRK) www.trulygreensolutions.com

More information

LED FIXTURE CATALOG. Shining light into the future

LED FIXTURE CATALOG. Shining light into the future LED FIXTURE CATALOG Shining light into the future Company Profile Ohyama Lights, LLC strives to be an innovative company that is responsive to its customers needs. Our mission is to put the customer first

More information

Infrared LED Light - 3 watts - stud mount v - 750nm, 850nm or 940nm

Infrared LED Light - 3 watts - stud mount v - 750nm, 850nm or 940nm Infrared LED Light - 3 watts - stud mount - 9-42v - 750nm, 850nm or 940nm Part #: LEDLB-1-IR Page: 1 Buy American Compliant The LEDLB-1-IR LED is an ultra compact and powerful medical use suitable infrared

More information

elevated ambient capability. in installations where moisture, dirt, dust, vibration, corrosion and rough usage are problems.

elevated ambient capability. in installations where moisture, dirt, dust, vibration, corrosion and rough usage are problems. V Series H.I.D s VG, VN, VZ Series Wet Locations Marine Locations NEMA 3,3R,4,4X,7 < VG > < VN > < VZ > Type of Explosion-proof Fixture Wattage Class I Division 2 Group A,B,C,D Class II Division 1,2 Group

More information

EVLPF Series Compact Fluorescent

EVLPF Series Compact Fluorescent EVLPF Series Low Profile Hazard Gard Luminaires Cl. I, Div. 1, Groups B (GB Suffix), C, D Cl. I, Zone 1, Groups IIB + H2 (GB Suffix), IIB, IIA Cl. II, Div. 1, Groups E, F, G Class III, Simultaneous Presence

More information

WARRANTY LED ECO PANEL.

WARRANTY LED ECO PANEL. LED ECO PANEL www.trulygreensolutions.com 8 MODELS AVAILABLE IN 25W TO 72W EXPECTED LIE OVER 50,000 HRS Compatible Emergency Battery Backup Available eatures 5 YEAR Suitable or Damp Location Use IES ILES

More information

LED Light Emitter - 7, 3-Watt CREE LEDs Lumens Volts

LED Light Emitter - 7, 3-Watt CREE LEDs Lumens Volts LED Light Emitter - 7, 3-Watt CREE LEDs - 1750 Lumens - 9-32 Volts Part #: LEDLB-21-3C Page: 1 Buy American Compliant The Larson Electronics LEDLB-21-3C LED Light Bar offers high light output in a light

More information

Code Master Factory Sealed Strobe Luminaires Explosionproof, Dust-Ignitionproof

Code Master Factory Sealed Strobe Luminaires Explosionproof, Dust-Ignitionproof Code Master Factory Sealed Strobe Luminaires Lighting Lighting: Explosionproof Visual Signal Applications Code Master Explosionproof Strobe fixtures are designed to provide safe operation in the presence

More information

LMV Series W Low Profile - Medium Base

LMV Series W Low Profile - Medium Base L LMV Series 50-150W Low Profile - Medium Base Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups E, F, G;

More information

Enhancing Safety + Productivity. Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications

Enhancing Safety + Productivity. Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications Enhancing Safety + Productivity Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications High-performance, high-brightness Champ VMV LED luminaire brilliantly

More information

LED ECO PANEL.

LED ECO PANEL. Not all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. LED ECO PANEL www.trulygreensolutions.com

More information

EVLED201 36W Led Luminaire. Descriptions. Manufacturer Information. Packaging Carton 1 Weight Per each 14.85

EVLED201 36W Led Luminaire. Descriptions. Manufacturer Information. Packaging Carton 1 Weight Per each 14.85 80 South Street 7596-726, TX Nacogdoches Phone: 96-569-791 Fax: 96-560-685 EVLED201 6W Led Luminaire Catalog Number Manufacturer Description Weight per unit Product Category Descriptions Long Description

More information

Lumination LED Luminaires

Lumination LED Luminaires GE Lighting Lumination LED Luminaires Recessed LED Luminaire AB Series Dimensional Distinction GE Lumination AB Series LED Recessed Luminaires invigorate drop ceilings with a gently curved lens and stylishly

More information

Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications. Now cul Listed!

Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications. Now cul Listed! Enhancing Safety + Productivity Champ VMV LED Series Luminaires Leading the way in LED technology for industrial and hazardous applications Now cul Listed! High-performance,high-brightness Champ VMV LED

More information

LED RETROFIT SOLUTIONS

LED RETROFIT SOLUTIONS The adoption of LED technology for general illumination systems is considered the attractive choice when compared against traditional linear fluorescent lamps. Engineered Products Company (EPCO) LED RetroFit

More information

SECTION INTERIOR LIGHTING

SECTION INTERIOR LIGHTING SECTION 26 51 00 INTERIOR LIGHTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

IR LED Light Emitter - 12 watts - 4 LEDs - 90'L X 70'W beam Volts DC - 750/850/940Nm

IR LED Light Emitter - 12 watts - 4 LEDs - 90'L X 70'W beam Volts DC - 750/850/940Nm IR LED Light Emitter - 12 watts - 4 LEDs - 90'L X 70'W beam - 9-42 Volts DC - 750/850/940Nm Part #: LEDLB-4-IR Buy American Compliant The Larson Electronics LEDLB-4-IR LED Light Bar offers high infrared

More information

E10 & L9 Low Wattage Light Cone Data

E10 & L9 Low Wattage Light Cone Data E10 & L9 Low Light Cone Data 2W-A-SP 2W-A-NFL 2W-A-FL 3W-SP 3W-NFL 3W-FL 4W-SP 4W-NFL 4W-FL SERIES Toshiba LED Lighting gives you nothing but pure light. At Toshiba, we re illuminating the world by introducing

More information

ENERGY EFFICIENT LED SOLUTIONS

ENERGY EFFICIENT LED SOLUTIONS DIMMABLE 720 850 SAMSUNG SMD LED LUNA 10W LED DOWNLIGHT Ø 85mm Diameter cut out size: 70mm 1mm Ø 65mm The Luna 10 watt LED down light is a high quality fitting that combines highpowered Samsung SMD technology

More information

The Commercial LED Lighting Specialist

The Commercial LED Lighting Specialist The Commercial LED Lighting Specialist JANUARY 2016 PRODUCT CATEGORY DATA SHEET Our Service, Our People, Your Choice new LED Panel Lights Manufactured by: LED Panel Lights are versatile and reliable. Incorporating

More information

Reflector T2 and GU10 6,000 hours

Reflector T2 and GU10 6,000 hours Reflector T2 and GU1 6, hours 11watt SES E14 Small Screw Cap Equivalent to 6watt R63 information CFL Reflector and GU1 6, hours lamps offer traditional incandescent and halogen shapes and sizes, long life

More information

The Commercial LED Lighting Specialist

The Commercial LED Lighting Specialist The Commercial LED Lighting Specialist JANUARY 2016 LED GLASS T8 TUBES PRODUCT CATEGORY DATA SHEET Our Service, Our People, Your Choice LED GLASS T8 TUBES LED Glass T8 Tubes Manufactured by: The range

More information

Hazardous Area LED Lighting Hazard Gard LED Luminaires. Hazard Gard EVLL LED

Hazardous Area LED Lighting Hazard Gard LED Luminaires. Hazard Gard EVLL LED Hazardous Area LED Lighting Hazard Gard LED Luminaires Hazard Gard EVLL LED Hazard Gard EVLL LED Safe. Reliable. Efficient. Featuring the industry's broadest range of LED luminaires for harsh and hazardous

More information

MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 26 ELECTRICAL

MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 26 ELECTRICAL SECTION 265100 - INTERIOR LIGHTING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Interior lighting fixtures, lamps, and ballasts. 2. Emergency lighting units. 3. Exit signs. 4.

More information

VISAGE ENVIRONMENTAL LIGHTING SOLUTION. INDOOR Lighting SERIES

VISAGE ENVIRONMENTAL LIGHTING SOLUTION. INDOOR Lighting SERIES VISAGE ENVIRONMENTAL LIGHTING SOLUTION INDOOR Lighting SERIES LED Lighting Concept LED, known as Light Emitting Diode, uses solid semiconductor chips as luminescent material. When put the forward voltage

More information

Incentive & Measure Specifications

Incentive & Measure Specifications Incentive & Measure Specifications Commercial Energy Solutions EasySave Program Prescriptive Incentives RETROFIT LIGHTING Incandescent to LED Lighting T12/T8 Fluorescent Tubes to LED Tubes HID to LED Fixtures

More information

Product Specifications MaxLumen MRI LED Diffused Lighting

Product Specifications MaxLumen MRI LED Diffused Lighting NOVA Energy & Automation Product Specifications MaxLumen MRI LED Diffused Lighting Model MXLumen22-X 03 January 2012 Product Description 1. Standard Applications The Nova Max Lumen LED 2x2 light fixture

More information

LED retrofits! 4 T8 Specification Guide. Retrofit your existing Fluorescent Lights in Seconds No Electrician Needed! Pure Bright

LED retrofits! 4 T8 Specification Guide. Retrofit your existing Fluorescent Lights in Seconds No Electrician Needed! Pure Bright T8 PBT8-DL5004EFX-U AC 100V-277V Day Light 5000K Pure Bright LED retrofits! Retrofit your existing Fluorescent Lights in Seconds No Electrician Needed! With the highest safety rating available, UL Listed,

More information

CL001 >400 Watt lamp basecase, up to 600 Watt replacement fixture $95.00 Fixture

CL001 >400 Watt lamp basecase, up to 600 Watt replacement fixture $95.00 Fixture Lighting Specifications Business Please read the details below to ensure you are installing a qualifying product(s). An MID inspection of the pre-existing lighting scheme is required prior to the installation

More information

LED Lighting: Technology Selection and System Commissioning Course Number: CXENERGY1519

LED Lighting: Technology Selection and System Commissioning Course Number: CXENERGY1519 AABC Commissioning Group AIA Provider Number: 50111116 LED Lighting: Technology Selection and System Commissioning Course Number: CXENERGY1519 Michael Chow, P.E., CxA, LEED AP BD+C, Metro CD Engineering

More information

High bay LED lighting fixture

High bay LED lighting fixture Supporting bracket EWL - Zone 1, 2, 21, 22 - Replacing traditional discharge lamps of up to 750W - Savings in energy, maintenance and installation costs - Instant, brilliant illumination - Suitable for

More information

TERRALUX RETROFIT LED LIGHTING

TERRALUX RETROFIT LED LIGHTING TERRALUX RETROFIT LED LIGHTING TERRALUX Founded in Boulder, Colorado, Terralux has been designing and manufacturing energy efficient LED lighting solutions since 2003. Terralux products serve both the

More information