Series 9000 Total Hydrocarbon Analyzer

Size: px

Start display at page:

Download "Series 9000 Total Hydrocarbon Analyzer"

Melvyn Whitehead
6 years ago
Views:

1 Series 9000 Total Hydrocarbon Analyzer Analyzer The Baseline Series 9000 is the candidate of choice whenever accurate, reliable total hydrocarbon analysis is required. The Series 9000 analyzer provides unparalleled flexibility and offers continuous, fully automated gas analysis over a broad range of concentrations. The 9000 has a dynamic range from less than 10 ppb on the low range version and up to 100% as methane on the high range version. The analyzer has a generous complement of analog, digital and logic output capabilities. The analyzer is based on a flame ionization detector (FID) with FlowGuard electronic control that delivers a small portion of the sample gas to the detector flame. During the combustion process, organic or hydrocarbon-based gases in the sample are ionized then they are detected by the instrument and reported as a concentration. The Series 9000 can be configured with internal components for single or multipoint analysis of non-condensing gas samples. The automatic calibration feature enhances the long-term analytical stability of the instrument. These features place the instrument well ahead of the competition in performance, automation, and configurability. Applications The Series 9000 is designed to continuously monitor the total hydrocarbon content of non-condensing gases in a variety of applications, such as: Beverage grade CO analysis 2 Scrubber & oxidizer efficiency Carbon bed breakthrough detection Contaminant analysis in pure/ultrapure inert gases Well logging Industrial hygiene & safety monitoring Fenceline (perimeter) monitoring around industrial sites LEL monitoring Features Flame ionization detector. 3U case, 19 (48.3cm) rack mountable. Automatic calibration at user-defined intervals. Internal, multipoint sampling option. FlowGuard electronic control of fuel, air and sample. Electronic back-pressure regulator with sample bypass system ensures fast response. Discrete, multilevel concentration & fault alarms. Analog output ranges programmable from 1ppm 100% full scale. Programmable relays for concentration alarms, events and diagnostics. Automatic FID ignition, with automatic shut-off of sample, fuel and combustion air. Remote operation via RS-232 and Ethernet. Graphical display and easy to use menu system. Optional 9000 Keeper software to monitor and control the instrument remotely.

2 Series 9000 Total Hydrocarbon Analyzer Analytical Detector: Flame ionization detector (FID). Ranges: User definable based upon calibration within: MDQ 0.01ppm, Full-scale 1-200ppm (Methane) MDQ 0.1ppm, Full-scale 1-2,000ppm (Methane) MDQ 0.3ppm, Full-scale 1-20,000ppm (Methane) MDQ 0.003%, Full-scale % (Methane) Repeatability: +/- 1% Full-scale response. Drift: +/- 1% of full-scale over 24 hours. Response Time: < 5 seconds to 90% of final reading. Alarms: Multilevel concentration and fault alarms that result in audible and visual alarms. Alarms may also be mapped to relays to control external equipment. Sampling: Internal single or multipoint modules, for pre-filtered (<0.1 microns) non-condensing samples, with or without sample pump. Calibration: Programmable automatic or manual calibration. Support Gas: Hydrogen 35 cc/min, Air 175 cc/min (typical). Hydrocarbon content must be less than 1 ppm. Fuel blend options available, consult Baseline. Physical Dimensions: (48.3cm) W x (36.2cm) D x 5.25 (13.3cm) H. Weight: < 20 lb (9.07kg). Configuration: Bench-top or rack-mount 19 (48.3cm) panel. Connections: 1/4 (6.35mm) tube fitting connectors. Operating Temperature: F (0-40 C). Operating Humidity: 0 95% (non-condensing). Electrical Power: VAC, 50/60Hz, 3A. Display: 3.4 (8.6cm) x 4.5 (11.4cm) graphical display. Relay Outputs: 5 programmable form A relays rated to 230V AC (optional additional 9 relay output Analog Outputs: 1 programmable 0-20mA or 4-20mA isolated output (optional additional 3 analog output Digital Outputs: RS-232, Ethernet. P.O. Box 649, Highway 36 Lyons, CO P: F: E: Sales@BaselineIndustries.com D011.4

Series 9000 NMHC NonMethane Hydrocarbon Analyzer Analyzer The Baseline Series 9000 NMHC is a specialized member of the extraordinary Series 9000 family of gas analyzers.

3 Series 9000 NMHC NonMethane Hydrocarbon Analyzer Analyzer The Baseline Series 9000 NMHC is a specialized member of the extraordinary Series 9000 family of gas analyzers. The Series 9000 is the candidate of choice whenever accurate, reliable total, Methane, and NonMethane analysis is required. The Series 9000 analyzer provides unparalleled flexibility and offers continuous, fully automated gas analysis over a broad range of concentrations. The Series 9000 NMHC is designed to measure the total, methane, and non-methane hydrocarbon content of gas samples. The analyzer has a generous complement of analog, digital and logic output capabilities. The analyzer is based on a flame ionization detector (FID) and an oxidation catalyst that is switched in and out of a portion of the sample stream. The catalyst oxidizes all hydrocarbons except methane, for a methane measurement. The methane value is then automatically subtracted from the total hydrocarbon concentration to determine the nonmethane hydrocarbon reading. The Series 9000 NMHC can be configured with internal components for single or multipoint analysis of noncondensing gas samples. The automatic calibration feature enhances the long-term analytical stability of the instrument. These features place the instrument well ahead of the competition in performance, automation, and configurability. Applications The Series 9000 NMHC is designed to continuously monitor the total hydrocarbon content of non-condensing gases in a variety of applications, such as: Ambient Air Monitoring Networks Clean Rooms Air & Oxygen Purity in Air Separation Plants Features Flame ionization detector. 3U case, 19 (48.3cm) rack mountable. Hydrocarbon detection from sub-ppm to 1000ppm (Methane). Automatic calibration at user-defined intervals. Internal, multipoint sampling option. FlowGuard electronic control of fuel, air and sample. Electronic back-pressure regulator with sample bypass system ensures fast response. Discrete, multilevel concentration & fault alarms. Programmable analog output ranges. Programmable relays for concentration alarms, events and diagnostics. Automatic FID ignition, with automatic shut-off of sample, fuel and combustion air. Remote operation via RS-232 and Ethernet. Graphical display and easy to use menu system. Optional 9000 Keeper software to monitor and control the instrument remotely.

4 Series 9000 NMHC NonMethane Hydrocarbon Analyzer Analytical Detector: Flame ionization detector (FID). Oxidizer: Oxidizes NonMethane gases. Range: User definable based upon calibration within: MDQ 0.06ppm, Full-scale 1-200ppm (Air Balance) MDQ 0.1ppm, Full-scale ppm (Air Balance) MDQ 0.03ppm, Full-scale 1-200ppm (O 2 Balance) Repeatability: +/- 1% Full-scale response. Drift: +/- 1% of Full-Scale over 24 hours. Response Time: T90 < 30 sec. Alarms: Multilevel concentration and fault alarms that result in audible and visual alarms. Alarms may also be mapped to relays to control external equipment. Sampling: Internal single or multipoint modules for pre-filtered (<0.1 microns), non-condensing samples with or without sample pump. Calibration: Programmable automatic or manual calibration. Support Gas: Hydrogen 35 cc/min (H 2 He Blend 100cc/ min), Air 175 cc/min (typical). Hydrocarbon content must be less than 1 ppm. Fuel blend options available, consult Baseline. Physical Dimensions: (48.3cm) W x (36.2cm) D x 5.25 (13.3cm) H. Weight: < 20 lb (9.07kg). Configuration: Bench-top or rack-mount 19 (48.3cm) panel. Connections: 1/4 (6.35mm) tube fitting connectors. Operating Temperature: F (0-40 C). Operating Humidity: 0 95% (non-condensing). Electrical Power: VAC, 50/60Hz, 3A. Display: 3.4 (8.6cm) x 4.5 (11.4cm) graphical display. Relay Outputs: 5 programmable form A relays rated to 230V AC (optional additional 9 relay output Analog Outputs: 1 programmable 0-20mA or 4-20mA isolated output (optional additional 3 analog output Digital Outputs: RS-232, Ethernet. P.O. Box 649, Highway 36 Lyons, CO P: F: E: Sales@BaselineIndustries.com D018.5

Series 9000 TCA Total Carbon Analyzer Analyzer The Baseline Series 9000 TCA is a specialized member of the extraordinary Series 9000 family of gas analyzers.

5 Series 9000 TCA Total Carbon Analyzer Analyzer The Baseline Series 9000 TCA is a specialized member of the extraordinary Series 9000 family of gas analyzers. The Series 9000 is the candidate of choice whenever accurate, reliable total hydrocarbon and total carbon analysis is required. The Series 9000 analyzer provides unparalleled flexibility and offers continuous, fully automated gas analysis over a broad range of concentrations. The Series 9000 TCA has a dynamic range from less than 0.1 ppm to 100 ppm, it s designed to measure total hydrocarbon content and provide a combined carbon monoxide (CO) and carbon dioxide (CO 2 ) reading. The analyzer has a generous complement of analog, digital and logic output capabilities. The analyzer is based on a flame ionization detector (FID) and a reduction catalyst that is switched in and out of a portion of the sample stream. Total hydrocarbons are measured first, and then the catalyst switches in. The catalyst converts the CO & CO 2 to methane and leaves the hydrocarbons unchanged for a total carbon measurement. The total hydrocarbon value is then automatically subtracted from the total carbon concentration to determine the combined CO/CO 2 reading The Series 9000 TCA can be configured with internal components for single or multipoint analysis of noncondensing gas samples. The automatic calibration feature enhances the long-term analytical stability of the instrument. Applications The Series 9000 TCA is designed to continuously monitor total hydrocarbons and trace levels of CO/CO 2 in order to provide a total carbon reading. This specialized analyzer is configured for the detection of hydrocarbon and CO/CO 2 impurities in pure and ultrapure inert gases such as argon, helium, hydrogen, and nitrogen. Samples must be free of oxygen. Features Flame ionization detector. 3U case, 19 (48.3cm) rack mountable. Hydrocarbon detection from sub-ppm to 100 ppm levels. Automatic calibration at user-defined intervals. Internal, multipoint sampling option. FlowGuard electronic control of fuel, air and sample. Electronic back-pressure regulator with sample bypass system ensures fast response. Discrete, multilevel concentration & fault alarms. Analog output ranges programmable from 1ppm 100% full scale. Programmable relays for concentration alarms, events and diagnostics. Automatic FID ignition, with automatic shut-off of sample, fuel and combustion air. Remote operation via RS-232 and Ethernet. Graphical display and easy to use menu system. Optional 9000 Keeper software to monitor and control the instrument remotely.

6 Series 9000 TCA Total Carbon Analyzer Analytical Detector: Flame ionization detector (FID). Methanizer: Converts low levels of CO and CO 2 to methane. Range: User definable based upon calibration within: ppm (Methane). MDQ: 0.1 ppm (100 ppb). Repeatability: +/- 1% Full-scale response. Drift: Zero: +/- 1% Full-scale over 24 hours Response Time: T90 < 30 sec. Alarms: Multilevel concentration and fault alarms that result in audible and visual alarms. Alarms may also be mapped to relays to control external equipment. Sampling: Internal single or multipoint modules for pre-filtered (<0.1 microns), non-condensing samples, with or without sample pump. Physical Dimensions: (48.3cm) W x (36.2cm) D x 5.25 (13.3cm) H. Weight: < 20 lb (9.07kg). Configuration: Bench-top or rack-mount 19 (48.3cm) panel. Connections: 1/4 (6.35mm) tube fitting connectors. Operating Temperature: F (0-40 C). Operating Humidity: 0 95% (non-condensing). Electrical Power: VAC, 50/60Hz, 3A. Display: 3.4 (8.6cm) x 4.5 (11.4cm) graphical display. Relay Outputs: 5 programmable form A relays rated to 230V AC (optional additional 9 relay output Calibration: Programmable automatic or manual calibration. Support Gas: Hydrogen 40 cc/min, Air 200 cc/min. (typical). Hydrocarbon content must be less than 1 ppm. Fuel blend options available, consult Baseline Analog Outputs: 1 programmable 0-20mA or 4-20mA isolated output (optional additional 3 analog output Digital Outputs: RS-232, Ethernet. P.O. Box 649, Highway 36 Lyons, CO P: F: E: Sales@BaselineIndustries.com D019.4

7 Series 9000 H Heated Hydrocarbon Analyzer Analyzer The Baseline Series 9000 H is a high-temperature member of the extraordinary Series 9000 family of gas analyzers. The Series 9000 is the candidate of choice whenever accurate, reliable hydrocarbon analysis is required. The Series 9000 H has a dynamic range from 0.1 ppm to 10% (Propane) or 0.3 ppm to 50% (Methane). The analyzer has a generous complement of analog, digital and logic output capabilities. These features place the instrument well ahead of the competition in performance, automation, and configurability. The analyzer is based on a flame ionization detector (FID) with FlowGuard electronic control that delivers a small portion of the sample gas to the detector flame. During the combustion process, organic or hydrocarbon-based gases in the sample are ionized then they can be detected by the instrument and reported as a concentration. The Series 9000 H is configured for single point analysis of samples heated up to 376 F (191 C). The automatic calibration feature enhances the long-term analytical stability of the instrument. Applications The Series 9000 H is designed to continuously monitor the total hydrocarbon content of gases and maintain the temperature of heated sample above their dew point. This extremely versitile instrument can be configured to support a variety of applications, such as: Compliance monitoring for EPA Methods 25A & 503 Continuous Emission Monitoring (CEM) of source hydrocarbons Scrubber & oxidizer efficiency Carbon bed breakthrough detection LEL monitoring Vehicle emissions Chemical process blending Features Flame ionization detector. 3U case, 19 (48.3cm) rack mountable. Hydrocarbon detection from sub-ppm to 50% levels (Methane). Automatic calibration at user-defined intervals. FlowGuard electronic control of fuel, air and sample. Electronic back-pressure regulator with sample bypass system ensures fast response. Discrete, multilevel concentration & fault alarms. Programmable relays for concentration alarms, events and diagnostics. Automatic FID ignition, with automatic shut-off of sample, fuel and combustion air. Remote operation via RS-232 and Ethernet. Graphical display and easy to use menu system. Optional 9000 Keeper software to monitor and control the instrument remotely.

8 Series 9000 H Heated Hydrocarbon Analyzer Analytical Detector: Flame ionization detector (FID). Sample Temperature: Up to 376 F (191 C). Ranges: User definable based upon calibration within: MDQ 0.3ppm, Full-scale 1 to 2,000ppm (Methane) MDQ 0.6ppm, Full-scale 1 20,000ppm (Methane) MDQ 0.003%, Full-scale % (Methane) Repeatability: +/- 1% Full-scale response. Drift: +/- 1% of Full-Scale over 24 hours. Response Time: T90 < 5 sec. Alarms: Multilevel concentration and fault alarms that result in audible and visual alarms. Alarms may also be mapped to relays to control external equipment. Sampling: Internal single module for pre-filtered (<0.1 microns), non-condensing samples, with or without sample pump. Calibration: Programmable automatic or manual calibration. Support Gas: Hydrogen 40 cc/min, Air 200 cc/min. (typical). Hydrocarbon content must be less than 1 ppm. Fuel blend options available, consult Baseline Physical Dimensions: (48.3cm) W x (36.2cm) D x 5.25 (13.3cm) H. Weight: < 25 lb (11.3kg). Configuration: Bench-top or rack-mount 19 (48.3cm) panel. Connections: 1/4 (6.35mm) tube fitting connectors. Operating Temperature: F (0-40 C). Operating Humidity: 0 95% (non-condensing). Electrical Power: VAC, 50/60Hz, 3A. Display: 3.4 (8.6cm) x 4.5 (11.4cm) graphical display. Relay Outputs: 5 programmable form A relays rated to 230V AC. Analog Outputs: 1 programmable 0-20mA or 4-20mA isolated output. Digital Outputs: RS-232, Ethernet. P.O. Box 649, Highway 36 Lyons, CO P: F: E: Sales@BaselineIndustries.com D025.3

Series 9000 Analyzer Versions Model 9000 THA 9000 NMHC 9000 H 9000 TCA Description Fully Automated Hydrocarbon Analyzer Methane / Non-Methane Hydrocarbons Fully Automated Heated Hydrocarbon Analyzer

4 point Sampling Type 4 point is Sequential 4 point is Sequential Continuous 4 point is Sequential Outputs Standard: 5 relays, 1 analog, RS-232, Ethernet Optional: Additional 9 relays & 3 analogs

9 Series 9000 Analyzer Versions Model 9000 THA 9000 NMHC 9000 H 9000 TCA Description Fully Automated Hydrocarbon Analyzer Methane / Non-Methane Hydrocarbons Fully Automated Heated Hydrocarbon Analyzer Total Carbon Analyzer (THC+CO+CO 2 in inert gases, except air & O 2 ) Detector FID FID with Oxidizer Catalyst FID FID with Methanizer Catalyst Sample Points 1 and 4 point 1 and 4 point 1 point 1 and 4 point Sampling Type 4 point is Sequential 4 point is Sequential Continuous 4 point is Sequential Outputs Standard: 5 relays, 1 analog, RS-232, Ethernet Optional: Additional 9 relays & 3 analogs Standard: 5 relays, 1 analog, RS-232, Ethernet Optional: Additional 9 relays & 3 analogs Standard: 5 relays, 1 analog, RS-232, Ethernet Standard: 5 relays, 1 analog, RS-232, Ethernet Optional: Additional 9 relays & 3 analogs Internal Wetted Parts Stainless Steel Stainless Steel Stainless Steel Stainless Steel Sample Temperature Ambient Ambient Up to 191 C (376 F) Ambient Repeatability Drift +/- 1% full scale +/- 1% full scale +/- 1% full scale +/- 1% full scale +/- 1% over 24 hours +/- 1% over 24 hours +/- 1% over 24 hours +/- 1% over 24 hours Gas Flow Control Electronic Electronic Electronic Electronic User selectable within: User selectable within: User selectable within: User selectable within: 0.01 to 100ppm 0.06 to 200ppm (Air balance) 0.3 to 2000ppm 0.1 to 100ppm Ranges & MDQ 0.1 to 2000ppm 0.1 to 1000ppm (Air balance) 0.6 to 20000ppm (as Methane) 0.3 to 20000ppm 0.03 to 200ppm (O 2 balance) 0.003% to 50% 0.003% to 100% Calibration Automatic or Manual Automatic or Manual Automatic or Manual Automatic or Manual Calibration Plumbing Optional: Internal Zero/Span Valves Optional: Internal Zero/Span Valves Optional: Internal Zero/Span Valves Optional: Internal Zero/Span Valves P.O. Box 649, Highway 36 Lyons, CO P: F: E: Info@BaselineIndustries.com D031.1

HFID Heated Total Hydrocarbon Analyzer Module

Product Data Sheet PDS 103-685.A01 October, 2003 NGA 2000 HFID Heated Total Hydrocarbon Analyzer Module Heated analyzer designed to operate from 200 F to 400 F Eliminates loss of hydrocarbons due to condensation