ISO NORMAS PUBLICADAS. ISO/IEC : Information technology -- Security techniques -- Anonymous digital signatures -- Part 1: General

Transcription

1 ISO NORMAS PUBLICADAS ISO/JTC - Information technology ISO/IEC : Information technology -- Security techniques -- Anonymous digital signatures -- Part 1: General ISO/IEC :2009/Amd 4: New levels for AAC profiles ISO/IEC :2011/Amd 2: Multi-resolution 3D mesh compression ISO/IEC :2008/Amd 4: Frame with error correction ISO/IEC : Information technology -- Media context and control -- Part 1: Architecture ISO/IEC :2010/Amd 2: Support for raw audio-visual data ISO/IEC : Information technology -- Media context and control -- Part 7: Conformance and reference software ISO/IEC :2012/Amd 2: Carriage of timed text and other visual overlays ISO/IEC :2012/Amd 2: Carriage of timed text and other visual overlays ISO/IEC 27000: Information technology -- Security techniques -- Information security management systems -- Overview and vocabulary ISO/TC 6 - Paper, board and pulps ISO 23714: Pulps -- Determination of water retention value (WRV) ISO : Pulps -- Determination of fibre length by automated optical analysis -- Part 2: Unpolarized light method ISO 535: Paper and board -- Determination of water absorptiveness -- Cobb method ISO/TC 8 - Ships and marine technology ISO 16855: Ships and marine technology -- Loose gear of lifting appliances on ships -- General requirements ISO 16856: Ships and marine technology -- Loose gear of lifting appliances on ships -- Hooks ISO 16857: Ships and marine technology -- Loose gear of lifting appliances on ships -- Shackles

2 ISO 16858: Ships and marine technology -- Loose gear of lifting appliances on ships -- Pulleys ISO : Ships and marine technology -- Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings -- Part 3: Code of practice ISO : Ships and marine technology -- Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings -- Part 2: Catalogue ISO : Ships and marine technology -- Floating pneumatic rubber fenders -- Part 1: High pressure ISO : Ships and marine technology -- Floating pneumatic rubber fenders -- Part 2: Low pressure ISO 17683: Ships and marine technology -- Ceramic weld backing for marine use ISO/TC 21 - Equipment for fire protection and fire fighting ISO : Fire protection -- Automatic sprinkler systems -- Part 1: Requirements and test methods for sprinklers ISO/TC 22 - Road vehicles ISO 8856: Road vehicles -- Electrical performance of starter motors -- Test methods and general requirements ISO : Road vehicles -- Product data exchange between chassis and body work manufacturers (BEP) -- Part 5: Coding of loader crane bodywork ISO/TC 23 - Tractors and machinery for agriculture and forestry ISO 5718: Harvesting equipment -- Blades for agricultural rotary mowers -- Requirements ISO/TC 29 - Small tools ISO : Tools for pressing -- Guide bushes -- Part 1: Forms ISO : Tools for pressing -- Guide bushes -- Part 4: Form C, gliding bushes, headed, type 1 ISO : Tools for pressing -- Guide bushes -- Part 2: Form A, gliding bushes, plain, type 1

3 ISO : Tools for pressing -- Guide bushes -- Part 5: Form D, ball cage bushes, headed, type 1 ISO : Tools for pressing -- Guide bushes -- Part 6: Form E, gliding bushes, flanged, type 1 ISO : Tools for pressing -- Guide bushes -- Part 7: Form F, ball cage bushes, flanged, type 1 ISO : Tools for pressing -- Guide bushes -- Part 8: Form G, gliding bushes, stepped, type 1 ISO : Tools for pressing -- Guide bushes -- Part 9: Form B, ball cage bushes, plain, type 2 ISO/TC 31 - Tyres, rims and valves ISO : Passenger car tyres and rims -- Part 2: Rims ISO/TC 35 - Paints and varnishes ISO 16927: Paints and varnishes -- Determination of the overcoatability and recoatability of a coating ISO/TC 38 - Textiles ISO : Textiles -- Tensile properties of fabrics -- Part 2: Determination of maximum force using the grab method ISO : Textiles -- Methods for determination of certain aromatic amines derived from azo colorants -- Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres ISO : Textiles -- Methods for determination of certain aromatic amines derived from azo colorants -- Part 3: Detection of the use of certain azo colorants, which may release 4- aminoazobenzene ISO/TC 41 - Pulleys and belts (including veebelts) ISO 17396: Synchronous belt drives -- Metric pitch, trapezoidal profile systems T and AT, belts and pulleys ISO/TC 42 - Photography

4 ISO 18937: Imaging materials -- Photographic reflection prints -- Methods for measuring indoor light stability ISO/TC 43 - Acoustics ISO 1680: Acoustics -- Test code for the measurement of airborne noise emitted by rotating electrical machines ISO/TC 44 - Welding and allied processes ISO : Quality requirements for welding -- Resistance welding of metallic materials - - Part 2: Elementary quality requirements ISO : Quality requirements for welding -- Resistance welding of metallic materials - - Part 1: Comprehensive quality requirements ISO/TC 45 - Rubber and rubber products ISO 976: Rubber and plastics -- Polymer dispersions and rubber latices -- Determination of ph ISO 17257: Rubber -- Identification of polymers -- Pyrolytic gas-chromatographic method using mass-spectrometric detection ISO 10282: Single-use sterile rubber surgical gloves -- Specification ISO/TC 46 - Information and documentation ISO 25577: Information and documentation -- MarcXchange ISO/TC 54 - Essential oils ISO 9235: Aromatic natural raw materials -- Vocabulary ISO/TC 58 - Gas cylinders ISO 10462: Gas cylinders -- Acetylene cylinders -- Periodic inspection and maintenance ISO/TC 59 - Buildings and civil engineering works ISO : Building Construction -- Service Life Planning -- Part 4: Service Life Planning using Building Information Modelling

5 ISO/TC 61 - Plastics ISO : Plastics -- Thermogravimetry (TG) of polymers -- Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics ISO : Plastics -- Thermomechanical analysis (TMA) -- Part 1: General principles ISO : Plastics -- Development and use of intermediate-scale fire tests for plastics products -- Part 1: General guidance ISO 29221: Plastics -- Determination of mode I plane-strain crack-arrest toughness ISO/TC 67 - Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ISO 19900: Petroleum and natural gas industries -- General requirements for offshore structures ISO 13847: Petroleum and natural gas industries -- Pipeline transportation systems -- Welding of pipelines ISO 11960: Petroleum and natural gas industries -- Steel pipes for use as casing or tubing for wells ISO/TC 69 - Applications of statistical methods ISO : Control charts -- Part 5: Specialized control charts ISO : Control charts -- Part 1: General guidelines ISO : Statistical interpretation of data -- Part 6: Determination of statistical tolerance intervals ISO/TC 85 - Nuclear energy, nuclear technologies, and radiological protection ISO 16966: Nuclear energy -- Nuclear fuel technology -- Theoretical activation calculation method to evaluate the radioactivity of activated waste generated at nuclear reactors ISO 8300: Nuclear fuel technology -- Determination of plutonium content in plutonium dioxide of nuclear grade quality -- Gravimetric method ISO 3925: Unsealed radioactive substances -- Identification and documentation ISO 19238: Radiological protection -- Performance criteria for service laboratories performing biological dosimetry by cytogenetics

6 ISO/TC 89 - Wood-based panels ISO 1096: Plywood Classification ISO/TC 96 - Cranes ISO : Cranes -- Control layout and characteristics -- Part 3: Tower cranes ISO/TC 98 - Bases for design of structures ISO 4355: Bases for design of structures -- Determination of snow loads on roofs ISO/TC Hydrometry ISO 18365: Hydrometry -- Selection, establishment and operation of a gauging station ISO/TC Anaesthetic and respiratory equipment ISO 27427: Anaesthetic and respiratory equipment -- Nebulizing systems and components ISO/TC Plain bearings ISO 2795: Plain bearings -- Sintered bushes -- Dimensions and tolerances ISO/TC Fluid power systems ISO 3320: Fluid power systems and components -- Cylinder bores and piston rod diameters and area ratios -- Metric series ISO/TC Plastics pipes, fittings and valves for the transport of fluids ISO : Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) -- Part 2: Pipes ISO : Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) -- Part 5: Fitness for purpose of the system ISO : Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) -- Part 1: General ISO : Plastics piping systems for the supply of gaseous fuels -- Polyethylene (PE) -- Part 3: Fittings

7 ISO/TC Graphical symbols ISO 7000: Graphical symbols for use on equipment -- Registered symbols ISO/TC Water quality ISO 16665: Water quality -- Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna ISO/TC Non-systemic contraceptives and STI barrier prophylactics ISO 25841: Female condoms -- Requirements and test methods ISO/TC Optics and photonics ISO : Optics and photonics -- Environmental test methods -- Part 23: Low pressure combined with cold, ambient temperature and dry and damp heat ISO/TC Assistive products for persons with disability ISO : Wheelchair seating -- Part 3: Determination of static, impact and repetitive load strengths for postural support devices ISO/TC Automation systems and integration ISO : Automation systems and integration -- Key performance indicators (KPIs) for manufacturing operations management -- Part 2: Definitions and descriptions ISO/TC Soil quality ISO 16387: Soil quality -- Effects of contaminants on Enchytraeidae (Enchytraeus sp.) -- Determination of effects on reproduction ISO/TC Surface chemical analysis ISO 17862: Surface chemical analysis -- Secondary ion mass spectrometry -- Linearity of intensity scale in single ion counting time-of-flight mass analysers ISO/TC Microbeam analysis ISO 17470: Microbeam analysis -- Electron probe microanalysis -- Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry

8 ISO/TC Fine ceramics ISO 17172: Fine ceramics (advanced ceramics, advanced technical ceramics) -- Determination of compaction properties of ceramic powders ISO/TC Geographic information/geomatics ISO 19157: Geographic information -- Data quality ISO/TC Dimensional and geometrical product specifications and verification ISO : Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments ISO/TC Health informatics ISO 22857: Health informatics -- Guidelines on data protection to facilitate trans-border flows of personal health data ISO 20301: Health informatics -- Health cards -- General characteristics ISO 18104: Health informatics -- Categorial structures for representation of nursing diagnoses and nursing actions in terminological systems ISO/TC Asset management ISO 55001: Asset management -- Management systems -- Requirements ISO 55000: Asset management -- Overview, principles and terminology ISO 55002: Asset management -- Management systems -- Guidelines for the application of ISO 55001