Izvlečki SIST. Slovenski inštitut za standardizacijo Slovenian Institute for Standardization. Sporočila Messages ISSN

Size: px
Start display at page:

Download "Izvlečki SIST. Slovenski inštitut za standardizacijo Slovenian Institute for Standardization. Sporočila Messages ISSN"

Transcription

1 Izvlečki SIST Slovenski inštitut za standardizacijo Slovenian Institute for Standardization Sporočila Messages ISSN

2 KONTAKTNA TOČKA IN PRODAJA PUBLIKACIJ Kontaktna točka tematske poizvedbe o slovenskih in tujih standardih poizvedbe o slovenskih in tujih tehničnih predpisih (poizvedbena točka WTO/TBT) naročnina na periodične novosti pri standardih izbranega profila ali iz izbranega seznama naročnina na mesečna obvestila o sklicevanju na standarde v tehničnih predpisih odprto pošta tel. faks e-pošta pon-čet 8h - 15h, p e t 813 h h - Kontaktna točka SIST Šmartinska c. 152, 1000 Ljubljana 01/ / info@sist.si Specialna knjižnica s standardoteko odprto s r e d a 8h - 12h pošta Knjižnica SIST Šmartinska c. 152, 1000 Ljubljana tel. 01/ faks 01/ e-pošta knjiznica@sist.si Prodaja strokovne literature odprto pon-čet 8h - 15h, p e t 8 h h slovenski standardi SIST pošta SIST, prodaja publikacije SIST Šmartinska c. 152, 1000 Ljubljana kopije standardov JUS (do ) tel. 01/ posredovanje tujih standardov faks 01/ in literature e-pošta prodaja@sist.si licenčne kopije standardov ISO in IEC, ETS, DIN BS in predlogov pren Naročila morajo biti pisna (pošta, faks, e-pošta ali osebni obisk); na nadnadno poslanih izvirnikih naročilnic mora biti navedena opomba o prvem naročilu. Prosimo vas, da pri prvem naročilu navedete natančen naslov za račun. Predstavitev na svetovnem spletu

3 Izvlečki iz novih slovenskih nacionalnih standardov v slovenskem jeziku junij 2016 V seznamu so bibliografski podatki o novih slovenskih nacionalnih standardih, ki so objavljeni v prilogi Sporočil Objave Cene posameznih dokumentov so označene s črko, ki označuje cenovni razred iz veljavnega cenika SIST. Izvleček iz cenika in naročilnica sta dosegljiva na koncu tega seznama, lahko pa si ogledate cenik tudi na naši spletni strani pod zavihkom Prodaja ali uporabite spletno naročilnico. SIST/TC AGO Alternativna goriva iz odpadkov SIST EN ISO :2016 SIST EN : (po) (en;fr;de) 16 str. (D) Trdna biogoriva - Določevanje porazdelitve velikosti delcev za nestisnjena goriva - 1. del: Metoda z nihajočim sitom z odprtinami 3,15 mm ali več (ISO :2016) Solid Biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO :2016) Osnova: EN ISO :2016 ICS: This international standard describes method for determination of the the size distribution of particulate biofuels by the horizontally oscillating screen method. It applies to particulate uncompressed fuels with a nominal top size of 1 mm and above such as wood chips, hog fuel, olive stones etc. A sample is subjected to sieving through horizontally oscillating sieves, sorting the particles in decreasing size classes by mechanical means.the sieving operation shall be horizontally oscillating (one or two dimensional), using an appropriate stroke-frequency according to the type of material. The number of sieves and the aperture sizes of the sieves shall be chosen according to the size specification of the actual sample material. SIST EN ISO 17830:2016 SIST EN 16126: (po) (en;fr;de) 16 str. (D) Trdna biogoriva - Določevanje porazdelitve velikosti delcev peletiziranih materialov (ISO 17830:2016) Solid biofuels - Determination of particle size distribution of material within pellets (ISO 17830:2016) Osnova: EN ISO 17830:2016 ICS: This international standard describes the method for determination of the particle size of disintegrated pellets. The pellets are disolved in water and dried after which the particles are sieved to determine the size of the particles constituting the pellets. 4 OBJAVE JUNIJ 2016

4 SIST/TC AKU Akustika SIST EN ISO :2016 SIST EN ISO :2005 SIST EN ISO :2005/AC:2009 SIST EN ISO 140-5: (po) (en) 46 str. (I) Akustika - Terenska merjenja zvočne izolirnosti v stavbah in stavbnih elementih - 3. del: Izolirnost fasade (ISO :2016) Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 3: Façade sound insulation (ISO :2016) Osnova: EN ISO :2016 ICS: , This part of ISO specifies procedures to determine the airborne sound insulation of façade elements (element methods) and whole façades (global methods) using sound pressure measurements. These procedures are intended for room volumes in the range from 10 m3 to 250 m3 in the frequency range from 50 Hz to Hz. The test results can be used to quantify, assess, and compare the airborne sound insulation in unfurnished or furnished rooms where the sound field can or cannot approximate to a diffuse field. The measured airborne sound insulation is frequency-dependent and can be converted into a single number quantity to characterize the acoustic performance using the rating procedures in ISO The element methods aim to estimate the sound reduction index of a façade element, for example, a window. The most accurate element method uses a loudspeaker as an artificial sound source. Other less accurate element methods use available traffic noise. The global methods, on the other hand, aim to estimate the outdoor/indoor sound level difference under actual traffic conditions. The most accurate global methods use the actual traffic as sound source. A loudspeaker can be used as an artificial sound source when there is insufficient level from traffic noise inside the room. An overview of the methods is given in Table 1. The element loudspeaker method yields an apparent sound reduction index which, under certain circumstances, can be compared with the sound reduction index measured in laboratories in accordance with ISO This method is the preferred method when the aim of the measurement is to evaluate the performance of a specified façade element in relation to its performance in the laboratory. The element road traffic method will serve the same purposes as the element loudspeaker method. It is particularly useful when, for different practical reasons, the element loudspeaker method cannot be used. These two methods will often yield slightly different results. The road traffic method tends to result in lower values of the sound reduction index than the loudspeaker method. In Annex D, this road traffic method is supplemented by the corresponding aircraft and railway traffic methods. The global road traffic method yields the real reduction of a façade in a given place relative to a position 2 m in front of the façade. This method is the preferred method when the aim of the measurement is to evaluate the performance of a whole façade, including all flanking paths, in a specified position relative to nearby roads. The result cannot be compared with that of laboratory measurements. The global loudspeaker method yields the sound reduction of a façade relative to a position that is 2 m in front of the façade. This method is particularly useful when, for practical reasons, the real source cannot be used; however, the result cannot be compared with that of laboratory measurements. SIST EN ISO 389-3:2016 SIST EN ISO 389-3: (po) (en) 21 str. (F) Akustika - Referenčna ničla za umerjanje avdiometrov - 3. del: Referenčne ekvivalentne ravni za prag vibracijske sile za čiste tone in za kostne vibratorje (vzbujevalnike kostnih vibracij) (ISO 389-3:2016) Acoustics - Reference zero for the calibration of audiometric equipment - Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators (ISO 389-3:2016) Osnova: EN ISO 389-3:2016 ICS: , ANNOUNCEMENTS JUNE

5 This part of ISO 389 specifies the following data applicable to the calibration of bone vibrators for puretonebone-conduction audiometry: a) reference equivalent threshold vibratory force levels (RETVFL), corresponding to the threshold of hearing of young otologically normal persons by bone-conduction audiometry; b) essential characteristics of the bone vibrator and the method of coupling to the test subject, and to the mechanical coupler; c) essential characteristics of the masking noise and the baseline masking noise level applied to the ear not under test. Guidance on the practical application of this part of ISO 389 in the calibration of audiometers is given in Annex B. RETVFL is the vibratory force level transmitted to a mechanical coupler of specified characteristics by a vibrator when applied to the mechanical coupler under stated conditions of test and when energized at the voltage level corresponding to the normal threshold of hearing for location on the mastoid prominence. NOTE 1 Values for the differences in reference equivalent threshold vibratory force levels between location on the forehead and mastoid are included for information in Annex C. NOTE 2 Recommended procedures for carrying out bone-conduction audiometry are specified in ISO SIST/TC CAA Mineralna veziva in zidarstvo SIST EN :2016 SIST EN : (po) (en;fr;de) 11 str. (C) Metode preskušanja za zidovje - 2. del: Ugotavljanje upogibne trdnosti Methods of test for masonry - Part 2: Determination of flexural strength Osnova: EN :2016 ICS: This European standard specifies a method for determining the flexural strength of small masonry specimens for the two principal axes of loading. Guidance is given on the preparation of the specimens, the conditioning required before testing, the testing machine, the method of test, the method of calculation and the contents of the test report. SIST EN :2016 SIST EN : (po) (en;fr;de) 61 str. (K) Projektiranje, priprava in uporaba zunanjih in notranjih ometov - 1. del: Zunanji ometi Design, preparation and application of external rendering and internal plastering - Part 1: External rendering Osnova: EN :2016 ICS: This document specifies requirements and recommendations for the design, preparation and application of cement, lime or other mineral binders, and/or combinations thereof, masonry cement and polymer modified binder based external renderings, on all common types of backgrounds, to both vertical walls and horizontal soffits. It includes rendering on both new and old backgrounds and the maintenance and repair of existing work. Renders with organic materials as the principal binder are not included in the scope of this document. This document gives guidance on the use of established site, factory and semi finished factory made renders. NOTE 1: Because of the many and varied materials and practices in Europe it is not possible for certain aspects of the standard to enter into sufficient detail to be fully usable to practitioners in each country. Such recommendations required to complement, but not alter any basic European recommendation are given in documentation prepared by each country. Aspects of this document which may need to be complemented are indicated where they occur by a footnote referencing this paragraph. Due to the wide range of climatic conditions in Europe, it is not possible to 6 OBJAVE JUNIJ 2016

6 recommend precise drying times for backgrounds and render coats. Any times given are for guidance only. This document does not cover the following: a) the use and application of special renders for liquid retaining structures, e.g. coatings, and for backgrounds to cladding systems; b) the structural repair of concrete; c) the installation of proprietary external thermal insulation composite systems (ETICS); d)the specification and use of sealants used to seal joints for use with rendering; e)the use of gypsum based renders used externally, but their use may be permitted in some countries; NOTE 2: Gypsum based products soften when subject to prolonged moist conditions. The use of such products externally will depend upon the climatic conditions where the render will be used and on the local building traditions. With the exception of some drier countries in southern Europe gypsum based renders are generally not recommended for external use and are therefore not included within the scope of this document. Their use may be permitted and controlled locally. f) the design and installation of flashings at windowsills and elsewhere. At various points in this document reference is made to the use of sealants. The specification of sealants and the design of such joints is outside the scope of this document. SIST EN :2016 SIST EN : (po) (en;fr;de) 37 str. (H) Projektiranje, priprava in uporaba zunanjih in notranjih ometov - 2. del: Notranji ometi Design, preparation and application of external rendering and internal plastering - Part 2: Internal plastering Osnova: EN :2016 ICS: This standard concerns the design considerations and essential principles for internal plastering systems and application of plastering systems. The standard gives in different parts requirements and recommendations for building details, design and materials considerations, the selection of mixes and the application of gypsum plasters; gypsum/lime plasters; premixed lightweight plasters; anhydrite plasters; lime/gypsum; cement and cement/lime based plasters; lime based plasters, silicate plasters, polymer plasters and polymer modified plasters. This standard does not deal with the following: - external finishes; - painting and or preparation; - impregnations; - structural repair of concrete; - fibrous plasterwork SIST EN 196-1:2016 SIST EN 196-1: (po) (en;fr;de) 33 str. (H) Metode preskušanja cementa - 1. del: Določanje trdnosti Methods of testing cement - Part 1: Determination of strength Osnova: EN 196-1:2016 ICS: This part of EN 196 describes the method for the determination of the compressive and, optionally, the flexural strength of cement mortar. The method applies to common cements and to other cements and materials, the standards for which call up this method. It may not apply to other cement types that have, for example, a very short initial setting time. The method is used for assessing whether the compressive strength of cement is in conformity with its specification and for validation testing of a CEN Standard sand, FprEN 196-1, or alternative compaction equipment. This part of EN 196 describes the reference equipment and procedure and allows alternative compaction equipment and procedures to be used provided that they have been validated in accordance with the appropriate provisions in this document. In the event of a dispute, only the reference equipment and procedure are used. ANNOUNCEMENTS JUNE

7 SIST EN 772-5:2016 SIST EN 772-5: (po) (en;fr;de) 10 str. (C) Metode preskušanja zidakov - 5. del: Določevanje vodotopnih soli v opečnih zidakih Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units Osnova: EN 772-5:2016 ICS: This European Standard specifies a method for determining the active soluble salts content of clay masonry units. SIST EN 846-9:2016 SIST EN 846-9: (po) (en;fr;de) 10 str. (C) Metode preskušanja dodatnih komponent zidovja - 9. del: Ugotavljanje upogibne in strižne nosilnosti preklad Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels Osnova: EN 846-9:2016 ICS: This European Standard specifies methods for determining the flexural and shear resistances and load deflection characteristics of single span, single or composite lintels used for supporting uniformly distributed loads over openings in masonry construction. SIST/TC CES Ceste SIST EN :2016 SIST EN : (po) (en;fr;de) 20 str. (E) Bitumenske zmesi - Preskusne metode del: Obraba zaradi gum ježevk Bituminous mixtures - Test methods - Part 16: Abrasion by studded tyres Osnova: EN :2016 ICS: This document describes test methods (method A and method B) for determining abrasion by studded tyres, tested on cylindrical specimens of bituminous mixtures. NOTE 1 Method A originates from the Prall method, which has been improved by comprehensive research work. According to Swedish research work, the method correlates with abrasion in the field. Method B originates from Finnish experience and correlates with abrasion in the field. NOTE 2 According to Nordic experiences the correlation between laboratory and abrasion in field is not established when polymer modified bitumen or rubber etc. is used. SIST EN : (po) (en;fr;de) 24 str. (F) Bitumenske zmesi - Preskusne metode del: Laboratorijska zmes Bituminous mixtures - Test methods - Part 35: Laboratory mixing Osnova: EN :2016 ICS: SIST EN :2005+A1:2007 This European Standard describes the laboratory mixing of bituminous materials for the manufacture of specimens. The standard specifies the reference installation temperatures for mixing based on the paving grade of the binder. For asphalt mixtures using foamed bitumen or bitumen emulsions, Annex A or A.5.6, respectively, shall be used. Once mixed, mastic asphalt samples shall be prepared in accordance with B.3. 8 OBJAVE JUNIJ 2016

8 SIST-TS CEN/TS : (po) (en;fr;de) 34 str. (H) Bitumenske zmesi - Preskusne metode del: Odpornost proti površinski obrabi Bituminous mixtures - Test methods - Part 50: Resistance to scuffing Osnova: CEN/TS :2016 ICS: This European Technical Specification specifies a test method for determining the resistance to scuffing of asphalt mixtures which are used in surface layers and are loaded with high shear stresses in road or airfield pavement. These shear stresses occur in the contact area between tyre and pavement surface and can be caused by cornering of the vehicle. Due to these shear stresses, material loss will occur at the surface of these layers. The test is normally performed on asphalt layers with a high amount of air voids (e.g. porous asphalt), but can also be applied on other asphaltic mixtures. Test specimens are used either produced in a laboratory or cut from the pavement. NOTE The test is developed to determine the resistance to scuffing for noise reducing surface layers where raveling is the normative damage criterion. The test can also be performed on other surface mixtures with a high resistance to permanent deformation. In case a mixture has a low resistance to permanent deformation, rutting can occur during the test. This can influence the test results. SIST/TC ELI Nizkonapetostne in komunikacijske električne inštalacije SIST HD :2010/A11: (po) (en;fr) 9 str. (C) Nizkonapetostne električne inštalacije del: Izbira in namestitev električne opreme - Druga oprema točka: Nizkonapetostni generatorji (IEC :2001/A2:2008 (Točka 551)) - Dopolnilo A11 Low-voltage electrical installations - Part 5-55: Selection and erection of electrical equipment - Other equipment - Clause 551: Low-voltage generating sets Osnova: HD :2010/A11:2016 ICS: , Dopolnilo A11:2016 je dodatek k standardu SIST HD :2010. Velja za nizkonapetostne in posebno nizkonapetostne napeljave, ki vsebujejo generatorje, namenjene za neprekinjeno ali občasno dobavo in za celotno ali del napeljave. Ne velja za neodvisne predmete posebno nizkonapetostne električne opreme, ki vsebujejo vir energije in obremenitev, ki porablja energijo in za katere obstaja določen standard proizvoda, ki vključuje zahteve za električno varnost. SIST HD :2016 SIST HD : (po) (en;fr) 27 str. (G) Električne inštalacije zgradb del: Zahteve za posebne inštalacije ali lokacije - Sončna fotonapetostna napajalna omrežja Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations - Photovoltaic (PV) systems Osnova: HD :2016 ICS: , This section applies to the electrical installation of PV generator intended to supply all or part of an installation and feeding of electricity into the public grid or local distribution. In this section, the electrical equipment of a PV generator, like any other item of electrical equipment, is dealt with only so far as its selection and application in the installation is concerned. ANNOUNCEMENTS JUNE

9 The electrical installation of a PV generator starts from a PV module or a set of PV modules connected in series with their cables, provided by the PV module manufacturer, up to the user installation or the utility supply point. Requirements of this document apply to PV generators for supply to an installation which is not connected to a system for distribution of electricity to the public, PV generators for supply to an installation in parallel with a system for distribution of electricity to the public, PV generators for supply to an installation as an alternative to a system for distribution of electricity to the public, appropriate combination of the above. Requirements for PV generators with batteries or other energy storage methods are under consideration. SIST-TP CLC/TR : (po) (en) 56 str. (J) Informacijska tehnologija - Naprave in infrastruktura podatkovnih centrov del: Priporočene prakse za gospodarjenje z energijo Information technology - Data centre facilities and infrastructures - Part 99-1: Recommended practices for energy management Osnova: CLC/TR :2016 ICS: , This Technical Report contains a compilation of recommended practices for improving the energy management (i.e. reduction of energy consumption and/or increases in energy efficiency) of data centres. SIST/TC EMC Elektromagnetna združljivost SIST EN 55011:2016 SIST EN 55011:2010 SIST EN 55011:2010/A1: (po) (en) 95 str. (M) Industrijska, znanstvena in medicinska oprema - Karakteristike občutljivosti za radijske motnje - Mejne vrednosti in merilne metode Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement Osnova: EN 55011:2016 ICS: This International Standard applies to industrial, scientific and medical electrical equipment operating in the frequency range 0 Hz to 400 GHz and to domestic and similar appliances designed to generate and/or use locally radio-frequency energy. This standard covers emission requirements related to radio-frequency (RF) disturbances in the frequency range of 9 khz to 400 GHz. Measurements need only be performed in frequency ranges where limits are specified in Clause 6. For ISM RF applications in the meaning of the definition found in the ITU Radio Regulations (see Definition 3.13), this standard covers emission requirements related to radio-frequency disturbances in the frequency range of 9 khz to 18 GHz. NOTE Emission requirements for induction cooking appliances are specified in CISPR 14-1 [1]1. Requirements for ISM RF lighting equipment and UV irradiators operating at frequencies within the ISM frequency bands defined by the ITU Radio Regulations are contained in this standard. Equipment covered by other CISPR product and product family emission standards are excluded from the scope of this standard. 10 OBJAVE JUNIJ 2016

10 SIST EN 55013:2013/A1: (po) (en) 10 str. (C) Zvokovni in radiodifuzijski sprejemniki s pripadajočo opremo - Karakteristike občutljivosti za radijske motnje - Mejne vrednosti in merilne metode - Dopolnilo A1 Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement Osnova: EN 55013:2013/A1:2016 ICS: , Dopolnilo A1:2016 je dodatek k standardu SIST EN 55013:2013. Ta mednarodni standard se uporablja za proizvodnjo elektromagnetne energije iz zvočnih in televizijskih prejemnikov za sprejem oddajanih in podobnih prenosov ter iz povezane opreme. Zajet frekvenčni razpon je od 9 khz do 400 GHz. Za frekvence, za katere ni določenih omejitev, ni treba opraviti meritev. Sistemi za sprejem za skupni sprejem, zlasti: glavne sprejemne postaje kabelskih omrežij (Community Antenna Television, CATV); sprejemni sistemi skupnosti (Master Antenna Television, MATV), so zajeti v standardu IEC Sprejemniki za digitalne signale so zajeti v prilogi A in prilogi B. Oprema informacijske tehnologije (ITE) je izključena, tudi če naj bi bila povezana s televizijskim sprejemnikom. Telekomunikacijska vrata sprejemnikov, ki so namenjena povezavi s telekomunikacijskim omrežjem, so zajeta v standardu CISPR 22. Poleg tega so merjenja pri telekomunikacijskih vratih izvedena s funkcijami sprejemanja oddajanja, ki so neodvisne od telekomunikacijske funkcije, onemogočene med merjenjem. Kartice sprejemnika za osebne računalnike se merijo v skladu z ustreznimi točkami tega standarda. Ta standard opisuje metode merjenja, ki se uporabljajo za zvočne in televizijske sprejemnike ali povezano opremo, ter določa omejitve za nadzor motenj, ki jih povzroči takšna oprema. Za multifunkcijsko opremo, ki hkrati spada pod različne točke tega standarda in/ali drugih standardov, so podrobnosti navedene pod točko 4.1. SIST/TC EXP Električni aparati za eksplozivne atmosfere SIST EN :2014/AC: (po) (en;fr;de) 5 str. (AC) Eksplozivne atmosfere del: Načrtovanje, izbira in namestitev električnih inštalacij Explosive atmospheres - Part 14: Electrical installations design, selection and erection Osnova: EN :2014/AC:2016 ICS: , Popravek k standardu SIST EN :2014. Standard EN IEC vsebuje posebne zahteve za načrtovanje, izbiro, namestitev in začetni pregled električnih inštalacij v eksplozivnih atmosferah ali v povezavi z njimi. Kadar je potrebna oprema za izpolnjevanje drugih okoljskih razmer, na primer zaščita pred vdorom vode in odpornost proti koroziji, so morda potrebne dodatne zahteve. Zahteve tega standarda se nanašajo samo na uporabo opreme v standardnih atmosferskih pogojih, kot so opredeljeni v standardu IEC Za druge pogoje so morda potrebni dodatni varnostni ukrepi. Oprema naj bi bila certificirana za te pogoje. Na primer večina vnetljivih materialov in številni materiali, ki se običajno obravnavajo kot nevnetljivi, močno gorijo ob dodajanju kisika. Te zahteve so dodatne k zahtevam za inštalacije v nenevarnih območjih. Ta standard velja za vso električno opremo, vključno s fiksno, prenosno, premično in osebno, ter stalne ali začasne inštalacije. Ta standard ne velja za - električne inštalacije v rudnikih, ki so občutljive na eksplozivni jamski plin. V tem standardu niso zajete nevarnosti zastrupitve, ki so povezane z vnetljivimi plini, tekočinami in prahom v koncentracijah, ki so običajno precej pod spodnjo mejo eksplozivnosti. Na mestih, kjer je osebje lahko izpostavljeno morebitnim toksičnim koncentracijam vnetljivega materiala, naj bi upoštevali ustrezne previdnostne ukrepe. Ti ukrepi niso zajeti v tem standardu. ANNOUNCEMENTS JUNE

11 SIST/TC IEHT Elektrotehnika - Hidravlične turbine SIST EN : (po) (en) 108 str. (N) Vetrne turbine del: Meritve mehanskih obremenitev (IEC :2015) Wind turbines - Part 13: Measurement of mechanical loads (IEC :2015) Osnova: EN :2016 ICS: This part of the IEC describes the measurement of fundamental structural loads on wind turbines for the purpose of the load simulation model validation. The standard prescribes the requirements and recommendations for site selection, signal selection, data acquisition, calibration, data verification, measurement load cases, capture matrix, post-processing, uncertainty determination and reporting. Informative annexes are also provided to improve understanding of testing methods. The methods described in this document can also be used for mechanical loads measurements for other purposes such as obtaining a measured statistical representation of loads, direct measurements of the design loads, safety and function testing, or measurement of component loads. If these methods are used for an alternative objective or used for an unconventional wind turbine design, the required signals, measurement load cases, capture matrix, and post processing methods should be evaluated and if needed adjusted to fit the objective. These methods are intended for onshore electricity-generating, horizontal-axis wind turbines (HAWTs) with rotor swept areas of larger than 200 m2. However, the methods described may be applicable to other wind turbines (for example, small wind turbines, ducted wind turbines, vertical axis wind turbines). SIST/TC IMIN Merilni instrumenti SIST EN ISO : (po) (en;fr;de) 23 str. (F) Merjenje pretoka fluida na osnovi tlačne razlike, povzročene z napravo, vstavljeno v polno zapolnjen vod s krožnim prerezom - 5. del: Stožčasta merila (ISO :2016) Measurement of fluid flow by means of pressure differential devices inserted in circular crosssection conduits running full - Part 5: Cone meters (ISO :2016) Osnova: EN ISO :2016 ICS: This part of ISO 5167 specifies the geometry and method of use (installation and operating conditions) of cone meters when they are inserted in a conduit running full to determine the flow rate of the fluid flowing in the conduit. As the uncertainty of an uncalibrated cone meter might be too high for a particular application, it might be deemed essential to calibrate the flow meter in accordance with Clause 7. This part of ISO 5167 also provides background information for calculating the flow rate and is applicable in conjunction with the requirements given in ISO This part of ISO 5167 is applicable only to cone meters in which the flow remains subsonic throughout the measuring section and where the fluid can be considered as single-phase. Uncalibrated cone meters can only be used within specified limits of pipe size, roughness, β, and Reynolds number. This part of ISO 5167 is not applicable to the measurement of pulsating flow. It does not cover the use of uncalibrated cone meters in pipes sized less than 50 mm or more than 500 mm, or where the pipe Reynolds numbers are below or greater than 1, A cone meter is a primary device which consists of a cone-shaped restriction held concentrically in the centre of the pipe with the nose of the cone upstream. The design of cone meter defined in this part of ISO 5167 has one or more upstream pressure tappings in the wall, and a downstream pressure tapping positioned in the back face of the cone with the connection to a differential pressure transmitter being a hole through the cone to the support bar, and then up through the support bar. Alternative designs of cone meters are available; however, at the time of writing, there 12 OBJAVE JUNIJ 2016

12 is insufficient data to fully characterize these devices, and therefore, these meters shall be calibrated in accordance with Clause 7. SIST/TC IMKF Magnetne komponente in feritni materiali SIST EN :2016 SIST EN : (po) (en) 17 str. (E) Pojmi in nomenklatura za jedra iz mehkomagnetnega ferita - 3. del: Smernice o velikosti podatkov, ki se pojavljajo v katalogih proizvajalcev jeder za transformatorje in tuljave Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing in manufacturers' catalogues of transformaer and inductor cores Osnova: EN :2016 ICS: Ta del standarda IEC podaja smernice za enotno metodo predstavitve lastnosti materialov iz mehkomagnetnega ferita in pogojev merjenja, v katerih naj bi jih ugotavljali. Namenjen je za uporabo v katalogih proizvajalcev za jedra za transformatorje in tuljave, da bi se omogočila primerljivost tovrstnih podatkov. Vključuje dodatna navodila za uporabnike in proizvajalce glede preskušanja ter specifikacije zanesljivosti feritnih jeder in naprav, ki uporabljajo feritna jedra. SIST EN :2016 SIST EN : (po) (en) 15 str. (D) Feritna jedra - Smernice o mejnih vrednostih površinskih nepravilnosti - 1. del: Splošna specifikacija Ferrite cores - Guidelines on the limits of surface irregularities - Part 1: General Specification Osnova: EN :2016 ICS: Ta del standarda IEC podaja smernice o dovoljenih mejnih vrednostih površinskih nepravilnosti feritnih jeder. Ta standard naj bi se obravnaval kot splošna specifikacija, uporabna za izmenjavo mnenj glede površinskih nepravilnosti med proizvajalci feritnih jeder in strankami. SIST EN :2016 SIST EN : (po) (en) 15 str. (D) Feritna jedra - Smernice o mejnih vrednostih površinskih nepravilnosti - 2. del: RM-jedra Ferrite cores - Guidelines on the limits of surface irregularities - Part 2: RM-cores Osnova: EN :2016 ICS: Ta del standarda IEC podaja smernice o dovoljenih mejnih vrednostih površinskih nepravilnosti, ki se uporabljajo za RM-jedra v skladu z ustrezno splošno specifikacijo. Ta standard naj bi se obravnaval kot področna specifikacija, uporabna za sklepanje dogovorov glede površinskih nepravilnosti med proizvajalci feritnih jeder in strankami. Zveza z drugim standardom. SIST EN :2016 SIST EN : (po) (en) 12 str. (C) Feritna jedra - Smernice o mejnih vrednostih površinskih nepravilnosti - 4. del: Obročkasta jedra Ferrite cores - Guidelines on the limits of surface irregularities - Part 4: Ring-cores Osnova: EN :2016 ICS: Ta del standarda IEC podaja navodila o dovoljenih mejnih vrednostih površinskih nepravilnosti, ki se uporabljajo za obročkasta jedra v skladu z ustrezno splošno specifikacijo, ANNOUNCEMENTS JUNE

13 opredeljeno v standardu IEC Ta standard je področna specifikacija, uporabna za sklepanje dogovorov glede površinskih nepravilnosti med proizvajalci feritnih jeder in strankami. SIST EN :2016 SIST EN 61185: (po) (en) 17 str. (E) Feritna jedra - Mere - 6. del: ETD-jedra za uporabo v napajalnikih Ferrite cores - Dimensions - Part 6: ETD-cores for use in power supplies Osnova: EN :2016 ICS: Ta del standarda IEC določa mere, ki so pomembne za mehansko medsebojno zamenljivost feritnih ETD-jeder, bistvene mere tuljave, ki se uporablja s temi jedri, in vrednosti efektivnih parametrov, ki se uporabljajo pri izračunih, povezanih z jedri. Uporaba»izpeljanih«standardov, ki podajajo podrobnejše specifikacije o delih komponent in hkrati dovoljujejo skladnost s tem standardom, je obravnavana v dodatku A, ki vključuje tudi primer izpeljanega standarda za tuljave. SIST/TC IPMA Polimerni materiali in izdelki SIST EN 16254:2014+A1:2016 SIST EN 16254:2014 SIST EN 16254:2014/kFprA1: (po) (en;fr;de) 20 str. (E) Lepila - Emulzijsko polimerizirani izocianat (EPI) za nosilne lesene konstrukcije - Razvrstitev in zahtevane lastnosti Adhesives - Emulsion polymerized isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements Osnova: EN 16254:2013+A1:2016 ICS: , This European Standard establishes a classification for emulsion polymerised isocyanate (EPI) adhesives according to their suitability for use in load-bearing timber structures in defined climatic exposure conditions, and specifies performance requirements for such adhesives for the industrial manufacture of load-bearing timber structures only. The performance requirements of this standard apply to the adhesive only, not to the structure. This European Standard is primarily intended for the use of adhesive manufacturers and for the use in timber structures bonded with adhesives, to assess or control the quality of adhesives. This European Standard only specifies the performance of an adhesive for use in an environment corresponding to the defined conditions. Such an adhesive meeting the requirements of this European Standard for its type is adequate for use in a load-bearing timber structure, provided that the bonding process has been carried out according to an appropriate product standard. SIST/TC ISTP Stavbno pohištvo SIST EN 13561:2015/AC: (po) (en;fr;de) 2 str. (AC) Zunanja senčila - Zahtevane lastnosti, vključno z varnostjo External blinds and awnings - Performance requirements including safety Osnova: EN 13561:2015/AC:2016 ICS: Popravek k standardu SIST EN 13561:2015. This European Standard specifies the performance requirements for blinds and awnings intended to be fitted externally to buildings and other construction works. It deals also with the significant 14 OBJAVE JUNIJ 2016

14 hazards for assembly, transport, installation, operation and maintenance (see list of significant machine hazards in Annex B). It applies to all external blinds and awnings whatever their design and nature of the materials used, as follows and defined in EN 12216: - folding arm awning, trellis arm awning, pivot arm awning, slide arm awning, vertical roller blind, marquisolette, façade awning, skylight awning, conservatory awning, Pergola awning, Dutch awning, insect screen; brise-soleil. This European Standard does not cover the wind resistance of non-retractable products, e.g. Dutch awnings and brise-soleil. The structural part to which the Pergola awning is fixed is not covered. The products covered by this European Standard may be operated manually, with or without compensating springs or by means of electric motors (power operated products). However, the durability and endurance of the autonomous supply for power operated external blinds and awnings not connected to the mains supply are not covered. This European Standard deals also with all significant hazards, hazardous situations and events when external blinds and awnings are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex B). This European Standard covers external blinds and awnings mounted externally. In case such products are installed internally, they should fulfil all relevant safety requirements defined in EN The noise emission of power operated external blinds and awnings is not considered to be a relevant hazard according to the machinery health and safety requirements. Therefore this European Standard does not contain any specific requirements on noise health and safety objective. SIST/TC ITEK Tekstil in tekstilni izdelki SIST EN ISO : (po) (en;fr;de) 49 str. (I) Tekstilije - Kvantitativna analiza kašmirskih, volnenih, drugih specialnih živalskih vlaken in njihovih mešanic - 1. del: Mikroskopska metoda s svetlobo (ISO :2016) Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 1: Light Microscopy method (ISO :2016) Osnova: EN ISO :2016 ICS: This part of ISO specifies a method for the identification, qualitative, and quantitative analysis of cashmere, wool, other speciality animal fibres, and their blends using light microscopy (LM). This part of ISO is applicable to loose fibres, intermediate-products, and final products of cashmere, wool, other speciality animal fibres, and their blends. SIST EN ISO : (po) (en;fr;de) 56 str. (J) Tekstilije - Kvantitativna analiza kašmirskih, volnenih, drugih specialnih živalskih vlaken in njihovih mešanic - 2. del: Metoda štetja z elektronskim mikroskopom (ISO :2016) Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 2: Scanning Electron Microscopy method (ISO :2016) Osnova: EN ISO :2016 ICS: This part of ISO specifies a method for the identification, qualitative, and quantitative analysis of cashmere, wool, other speciality animal fibres, and their blends using scanning electron microscopy (SEM). This part of ISO is applicable to loose fibres, intermediate products, and final products of cashmere, wool, other speciality animal fibres, and their blends. ANNOUNCEMENTS JUNE

15 SIST/TC ITIV Tiskana vezja in ravnanje z okoljem SIST EN : (po) (en) 14 str. (D) Preskusne metode za električne materiale, tiskana vezja ter druge povezovalne strukture in sestave del: Preskusne metode za povezovalne strukture (tiskana vezja) - Nadzorovanje spreminjanja upornosti enojno pokovinjenih lukenj med toplotnimi cikli Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3-719: Test methods for interconnection structures (printed boards) - Monitoring of single plated-through hole (PTH) resistance change during thermal cycling Osnova: EN :2016 ICS: , This part of IEC specifies a test method to monitor the resistance of single platedthrough holes (PTHs) in printed circuit boards (PCBs) to determine the PTH durability under thermomechanical stress induced by temperature cycling. SIST-TS CLC/TS : (po) (en) 20 str. (E) Zahteve za zbiranje, logistiko in obdelavo odpadne električne in elektronske opreme (WEEE) del: Tehnična specifikacija za preprečevanje onesnaženja - Svetilke Collection, logistics & Treatment requirements for WEEE - Part 3-2: Technical specification for depollution - Lamps Osnova: CLC/TS :2016 ICS: , , This European Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard for lamps, EN , and the Technical Specification CLC/TS :2014 for de-pollution - General. SIST/TC IUSN Usnje SIST EN ISO 19070: (po) (en;fr;de) 12 str. (C) Usnje - Kemijsko določevanje N-metil-2-pirolidona (NMP) v usnju (ISO 19070:2016) Leather - Chemical determination of N-methyl-2-pyrrolidone (NMP) in leather (ISO 19070:2016) Osnova: EN ISO 19070:2016 ICS: , This International Standard specifies a method to determine the amount of N-methyl-2- pyrrolidone (NMP) in leather and leather components. This method may also be used for the determination of N-ethyl-2-pyrrolidone (NEP) in leather. SIST EN ISO 19071: (po) (en;fr;de) 14 str. (D) Usnje - Kemični preskusi - Določevanje kroma (VI) in zmanjšani potencial kromovih sredstev za strojenje (ISO 19071:2016) Leather - Chemical tests - Determination of Chromium (VI) and the reductive potential for chromium tanning agents (ISO 19071:2016) Osnova: EN ISO 19071:2016 ICS: OBJAVE JUNIJ 2016

16 This International Standard specifies a test method for the determination of chromium (VI) content in chromium tanning agents. The results give information about the reductive potential of the chromium tanning agent. SIST/TC IVAV Varnost avdio, vizualnih in podobnih elektronskih naprav SIST EN 62911:2016 SIST EN 50514: (po) (en) 13 str. (D) Oprema za avdio, video in informacijsko tehnologijo - Redno preskušanje električne varnosti v proizvodnji Audio, video and information technology equipment - Routine electrical safety testing in production Osnova: EN 62911:2016 ICS: , , This International Standard defines routine electrical safety test procedures for use during or after manufacturing of complete equipment, sub-assemblies or components, complying with IEC 60065, IEC or IEC and powered by an a.c. mains supply or d.c. mains supply, to detect manufacturing failures and unacceptable tolerances in manufacturing and materials. NOTE All the tests defined in this standard do not necessarily have to be performed at the end product manufacturing location. The optimal location for the routine electrical safety tests can be defined by the equipment manufacturer and reviewed under the conformity assessment scheme. SIST/TC KON Konstrukcije SIST EN :2006+A1:2013/A101: (izv) (sl) 9 str. (SC) Evrokod 6: Projektiranje zidanih konstrukcij del: Splošna pravila za armirano in nearmirano zidovje - Nacionalni dodatek Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures - National Annex Osnova: ICS: , Dopolnilo A101:2016 je dodatek k standardu SIST EN :2006+A1:2013. Evrokod 6 se uporablja za projektiranje stavb in gradbenih inženirskih objektov ali njihovih delov, ki so grajeni iz nearmiranega, armiranega, prednapetega in povezanega zidovja. Evrokod 6 obravnava samo zahteve za odpornost, uporabnost in trajnost konstrukcij. Ostale zahteve, npr. zahteve za toplotno ali zvočno izolirnost, niso obravnavane. Izvedba del je zajeta le v obsegu, potrebnem za izbiro kakovosti materialov in gradbenih proizvodov, ki jih je treba uporabiti, ter standardov za izvedbo del na gradbišču, da so izpolnjene predpostavke pravil za projektiranje. Evrokod 6 ne zajema posebnih zahtev za potresnoodporno projektiranje. Določila, povezana s temi zahtevami, so podana v evrokodu 8, ki dopolnjuje evrokod 6 in je skladen z njim. Številčne vrednosti vplivov na stavbe in gradbene inženirske objekte, ki se morajo upoštevati pri projektiranju, niso navedene v evrokodu 6. Te vrednosti so podane v evrokodu 1. Evrokod 6, 1-1. del daje podlago za projektiranje stavb in gradbenih inženirskih objektov iz zidovja. Del obravnava nearmirano in armirano zidovje, kjer dodana armatura izboljša duktilnost in nosilnost ali uporabnost. Podaja načela za projektiranje prednapetega in povezanega zidovja, vendar brez pravil za uporabo. Ta del ne velja za zidovje s tlorisno površino manj kot 0,04 m2. Za tiste tipe konstrukcij, ki jih standard ne zajema v celoti, za nove vrste uporabe konstrukcij iz uveljavljenih materialov, za konstrukcije iz novih materialov oziroma za konstrukcije, ki morajo prevzeti vplive in druge posledice, za katere ni običajnih izkušenj, se načela in pravila za uporabo, navedena v tem standardu, lahko uporabljajo, vendar se po potrebi dopolnijo del navaja podrobna pravila, ki so v glavnem uporabna za običajne stavbe. Zaradi praktičnih razlogov ali poenostavitev ANNOUNCEMENTS JUNE

17 je uporabnost teh pravil lahko omejena. Kakršna koli omejitev uporabnosti je omenjena v besedilu na mestih, kjer je potrebno del obravnava naslednja poglavja: 1. razdelek: Splošno; 2. razdelek: Osnove projektiranja; 3. razdelek: Materiali; 4. razdelek: Trajnost; 5. razdelek: Analiza konstrukcije; 6. razdelek: Končno mejno stanje; 7. razdelek: Mejno stanje uporabnosti; 8. razdelek: Detajliranje; 9. razdelek: Izvedba del. SIST/TC KON.005 Lesene konstrukcije - EC 5 SIST EN 338:2016 SIST EN 338: (po) (en;fr;de) 11 str. (C) Konstrukcijski les - Trdnostni razredi Structural timber - Strength classes Osnova: EN 338:2016 ICS: This European Standard establishes a system of strength classes for general use in design codes. It gives characteristic strength and stiffness properties and density values for each class to which EN refers. This standard is applicable to all softwood and hardwood timber for structural use. SIST/TC KŽP Kmetijski pridelki in živilski proizvodi SIST EN 16801: (po) (en;fr;de) 14 str. (D) Živila - Določevanje elementov in njihovih kemijskih oblik - Določevanje metil živega srebra v živilih morskega izvora z izotopnim razredčenjem GC-ICP-MS Foodstuffs - Determination of elements and their chemical species - Determination of methylmercury in foodstuffs of marine origin by isotope dilution GC-ICP-MS Osnova: EN 16801:2016 ICS: This draft European Standard describes a method for the determination of monomethylmercury (MMHg) in foodstuffs of marine origin. The method has been validated in an interlaboratory test on mussel tissue, squid muscle, crab claw muscle, dog fish liver, whale meat, cod muscle and Greenland halibut muscle at levels from 0,04 mg/kg to 3,6 mg/kg dry weight (dw). SIST EN 16802: (po) (en;fr;de) 13 str. (D) Živila - Določevanje elementov in njihovih kemijskih oblik - Določevanje anorganskega arzena v živilih morskega in rastlinskega izvora z anionsko izmenjavo HPLC-ICP-MS Foodstuffs - Determination of elements and their chemical species - Determination of inorganic arsenic in foodstuffs of marine and plant origin by anion-exchange HPLC-ICP-MS Osnova: EN 16802:2016 ICS: , , This draft European Standard describes a procedure for the determination of inorganic arsenic in foodstuffs of marine and plant origin by anion-exchange HPLC-ICP-MS following waterbath extraction. This method has been validated in an interlaboratory test on white rice, wholemeal rice, leek, blue mussels, fish muscle and seaweed with an inorganic arsenic mass fraction in the range 0,073 mg/kg to 10,3 mg/kg. 18 OBJAVE JUNIJ 2016

18 SIST EN ISO 13299:2016 SIST EN ISO 13299: (po) (en) 49 str. (I) Senzorična analiza - Metodologija - Splošne smernice za uvajanje senzoričnega profila (ISO 13299:2016) Sensory analysis - Methodology - General guidance for establishing a sensory profile (ISO 13299:2016) Osnova: EN ISO 13299:2016 ICS: This International Standard gives guidelines for the overall process for establishing a sensory profile. Sensory profiles can be established for all products or samples which can be evaluated by the senses of sight, odour, taste, touch, or hearing (e.g. food, beverage, tobacco product, cosmetic, textile, paper, packaging, sample of air or water). This International Standard can also be useful in studies of human cognition and behaviour. Some applications of sensory profiling are as follows: to develop or change a product; to define a product, production standard, or trading standard in terms of its sensory attributes; to define a reference fresh product for shelf-life testing; to study and improve shelf-life of a product; to compare a product with a reference product or with other similar products on the market or under development; to map a product s perceived attributes for the purpose of relating them to factors such as instrumental, chemical or physical properties, and/or to consumer acceptability; to characterize by type and intensity the off-odours or off-tastes in a sample (e.g. in pollution studies). SIST EN ISO 15753:2016 SIST EN ISO 15753:2007 SIST EN ISO 15753:2007/A1: (po) (en) 30 str. (G) Rastlinske in živalske maščobe in olja - Določevanje policikličnih aromatskih ogljikovodikov (ISO 15753:2016) Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons (ISO 15753:2016) Osnova: EN ISO 15753:2016 ICS: This International Standard describes two methods for the determination of 15 polycyclic aromatic hydrocarbons (PAHs) in animal and vegetable fats and oils: a general method; a specific method for coconut oil and vegetable oils with short-chain fatty acids. These methods are not quantitative for the very volatile compounds such as naphthalene, acenaphthene and fluorene. Due to interferences provided by the matrix itself, palm oil and olive pomace oil cannot be analysed using this method. The quantification limit is 0,2 μg/kg for almost all compounds analysed, except for fluoranthene and benzo(g,h,i)perylene, where the quantification limit is 0,3 μg/kg, and indeno(1,2,3- c,d)pyrene, where the quantification limit is 1,0 μg/kg. NOTE The results for olive pomace oil in Annex B show that this method is not applicable to this type of oil. The precision data determined are very poor. Milk and milk products (or fat coming from milk and milk products) are excluded from the scope of this International Standard. ANNOUNCEMENTS JUNE

19 SIST EN ISO 18744: (po) (en) 29 str. (G) Mikrobiologija v prehranski verigi - Ugotavljanje prisotnosti in števila "Cryptosporidium" in "Giardia" v sveži zeleni listni zelenjavi in jagodičevju (ISO 18744:2016) Microbiology of the food chain - Detection and enumeration of Cryptosporidium and Giardia in fresh leafy green vegetables and berry fruits (ISO 18744:2016) Osnova: EN ISO 18744:2016 ICS: , This International Standard specifies a method that is applicable for the detection and enumeration of Cryptosporidium oocysts and Giardia cysts on or in food products that are described herein as fresh leafy green vegetables and berry fruits. With suitable controls, it may also be applicable for the examination of other fresh produce. This method does not allow the determination of viability or infectivity of any Cryptosporidium oocysts and Giardia cysts which may be present. The microscopy descriptions are for Cryptosporidium oocysts and Giardia cysts of size ranges which include those species known to be pathogenic to humans. SIST EN ISO 9936:2016 SIST EN ISO 9936:2006 SIST EN ISO 9936:2006/A1:2011 SIST EN ISO 9936:2006/AC: (po) (en) 23 str. (F) Rastlinske in živalske maščobe in olja - Določevanje tokoferola in tokotrienola s tekočinsko kromatografijo visoke ločljivosti (ISO 9936:2016) Animal and vegetable fats and oils - Determination of tocopherol and tocotrienol contents by highperformance liquid chromatography (ISO 9936:2016) Osnova: EN ISO 9936:2016 ICS: , This International Standard specifies a method for the determination of the contents of free α-, β-, γ-, and δ-tocopherols and tocotrienols (referred to jointly as tocols) in animal and vegetable fats and oils (referred to hereinafter as fats) by high-performance liquid chromatography (HPLC). For products containing tocopherol or tocotrienol esters, it is necessary to carry out a preliminary saponification. Milk and milk products (or fat coming from milk and milk products) are excluded from the Scope of this International Standard. NOTE A suitable method involving a cold saponification procedure is described in Annex B for information only. SIST-TS CEN/TS : (po) (en) 13 str. (D) Živila - Odkrivanje prisotnosti alergenov v živilih z metodami molekularne biologije - 3. del: Lešnik (Corylus avellana) - Kvalitativno odkrivanje specifičnega niza DNK v čokoladi s PCR v realnem času Foodstuffs - Detection of food allergens by molecular biological methods - Part 3: Hazelnut (Corylus avellana) - Qualitative detection of a specific DNA sequence in chocolate by real-time PCR Osnova: CEN/TS :2016 ICS: , Ta tehnična specifikacija opisuje postopek za kvalitativno odkrivanje lešnikov (Corylus avellana) v čokoladi. DNK se izvleče iz čokolade in specifičen niz DNK za lešnik se odkrije iz gena za cora 1 [4], [5]. 20 OBJAVE JUNIJ 2016

20 SIST/TC MOC Mobilne komunikacije SIST EN V2.1.1: (po) (en) 27 str. (G) Ozkopasovna telegrafska oprema z neposrednim tiskanjem za sprejemanje meteoroloških ali navigacijskih informacij (NAVTEX) - Harmonizirani standard, ki zajema bistvene zahteve členov 3.2 in 3.3(g) direktive 2014/53/EU Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX) - Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU Osnova: ETSI EN V2.1.1 ( ) ICS: , , The present document states the minimum requirements for a Narrow-Band Direct-Printing (NBDP) maritime receiver operating in the NAVTEX system. The equipment's function is to receive, display and/or print automatically and continuously, meteorological and navigational messages and Search And Rescue (SAR) messages transmitted by coast stations participating in the NAVTEX system. The present document also specifies technical characteristics, methods of measurement and required test results. The present document contains requirements to demonstrate that "... Radio equipment shall be so constructed that it both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference" [i.4] and that "...radio equipment supports certain features ensuring access to emergency services" [i.4]. In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the Radio Equipment Directive [i.4] may apply to equipment within the scope of the present document. SIST EN V2.1.1: (po) (en) 62 str. (K) Storitev kopenskih mobilnih komunikacij - Radijska oprema, namenjena predvsem za analogni prenos govora, ki uporablja vgrajeno anteno - Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU Land Mobile Service - Radio equipment using integral antennas intended primarily for analogue speech - Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU Osnova: ETSI EN V2.1.1 ( ) ICS: , The present document covers the minimum characteristics considered necessary in order to avoid harmful interference and to make acceptable use of the available frequencies. The present document applies to equipment with integral antennas, used in angle modulation systems in the land mobile service, operating on radio frequencies between 30 MHz and MHz, with channel separations of 12,5 khz, 20 khz and 25 khz, and is intended primarily for analogue speech. In the present document different requirements are given for the different radio frequency bands, channel separations, environmental conditions and types of equipment, where appropriate. The present document is complementary to ETSI EN [i.6], which covers radio equipment with an internal or external RF connector, for use in the land mobile service. The present document may apply to PMR446 equipment as defined in [i.7]. Note that PMR446 equipment has a requirement to incorporate a receiver and may have requirements for 180 s maximum transmission time and VOX. ANNOUNCEMENTS JUNE

21 The present document contains requirements to demonstrate that "... Radio equipment shall be so constructed that it both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference" and that "...radio equipment supports certain features ensuring access to emergency services" [i.8]. In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the Radio Equipment Directive [i.8] may apply to equipment within the scope of the present document. SIST EN V2.1.1: (po) (en) 62 str. (K) Storitev kopenskih mobilnih komunikacij - Radijska oprema z vgrajeno anteno, ki oddaja signale za vzbuditev specifičnega odziva v sprejemniku - Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU Land Mobile Service - Radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver - Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU Osnova: ETSI EN V2.1.1 ( ) ICS: , The present document applies to constant envelope angle modulation systems for use in the land mobile service, using the available bandwidth, operating on radio frequencies between 30 MHz and 1 GHz, with channel separations of 12,5 khz, 20 khz and 25 khz intended for transmission and/or reception of signals used to initiate a specific response in the receiver. The present document applies to non-speech and to the non-speech part of combined speech/nonspeech analogue equipment. In the present document, non-speech radio equipment is defined as a radio equipment transmitting a signal to initiate a specific response in the receiver. The equipment comprises a transmitter and associated encoder and/or a receiver and associated decoder. The encoder and/or decoder may be a separate piece of equipment, in which case compliance to the present document covers the encoder and/or decoder in connection with the transmitter and/or receiver equipment. In the present document different requirements are given for the different radio frequency bands, channel separations, environmental conditions and types of equipment, where appropriate. The type of equipment covered by the present document is handportable stations with integral antennas. The present document contains requirements to demonstrate that "... Radio equipment shall be so constructed that it both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference" and that "...radio equipment supports certain features ensuring access to emergency services" [i.5]. In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the Radio Equipment Directive [i.5] may apply to equipment within the scope of the present document. SIST EN V2.1.1: (po) (en) 79 str. (L) Storitev kopenskih mobilnih komunikacij - Radijska oprema, namenjena predvsem za prenos podatkov (in govora), ki uporablja vgrajeno anteno - Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU Land Mobile Service - Radio equipment intended for the transmission of data (and speech) and using an integral antenna - Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU Osnova: ETSI EN V2.1.1 ( ) ICS: , OBJAVE JUNIJ 2016

22 The present document covers the technical requirements for radio transmitters and receivers used in stations in the Private Mobile Radio (PMR) service. It applies to use in the land mobile service, operating on radio frequencies between 30 MHz and 1 GHz, with channel separations of 12,5 khz, 20 khz and 25 khz, intended for data or speech and data. It applies to equipment for continuous and/or discontinuous transmission. The equipment comprises a transmitter and associated encoder and modulator and/or a receiver and associated demodulator and decoder. The present document also applies to combined analogue and digital radio equipment using an integral antenna and intended for the transmission of data and/or speech. The present document is complementary to ETSI EN [i.5], which covers radio equipment with an internal or external RF connector. In the cases of:- combined full bandwidth analogue/full bandwidth digital equipment, if the analogue part of the equipment has already been measured according to ETSI EN [6]; - equipment which has already been measured according to the present document, and is remeasured with an add-on device, using another type of modulation without affecting any other characteristics of the equipment; only some of the requirements of the present document apply. These requirements are given in clause 4.8. SIST EN V1.15.1: (po) (en) 169 str. (P) Digitalna videoradiodifuzija (DVB) - Specifikacija za servisne informacije (SI) v sistemih DVB Digital Video Broadcasting (DVB) - Specification for Service Information (SI) in DVB systems Osnova: ETSI EN V ( ) ICS: The present document specifies the Service Information (SI) data which forms a part of DVB bitstreams, in order that the user can be provided with information to assist in selection of services and/or events within the bitstream, and so that the Integrated Receiver Decoder (IRD) can automatically configure itself for the selected service. SI data for automatic configuration is mostly specified within ISO/IEC [18] as Program Specific Information (PSI). The present document specifies additional data which complements the PSI by providing data to aid automatic tuning of IRDs, and additional information intended for display to the user. The manner of presentation of the information is not specified in the present document, and IRD manufacturers have freedom to choose appropriate presentation methods. It is expected that Electronic Programme Guides (EPGs) will be a feature of Digital TV transmissions. The definition of an EPG is outside the scope of the present document (i.e. the SI specification), but the data contained within the SI specified in the present document may be used as the basis for an EPG. Rules of operation for the implementation of the present document are specified in ETSI TS [i.2]. SIST EN V2.2.1: (po) (en) 92 str. (M) Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU Digital Enhanced Cordless Telecommunications (DECT) - Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU Osnova: ETSI EN V2.2.1 ( ) ICS: ANNOUNCEMENTS JUNE

23 The present document applies to the following equipment types for the Digital Enhanced Cordless Telecommunications (DECT) common interface: a) Fixed Part (FP); b) Portable Part (PP); c) Cordless Terminal Adapter (CTA); d) Wireless Relay Station (WRS) (FP and PP combined); e) Hybrid Part (HyP) (a PP with capability to act as a FP to provide PP to PP communication). These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1. The DECT service frequency band for transmitting and receiving for all elements is MHz to MHz. Details of the DECT Common Interface may be found in ETSI EN [i.10], ETSI EN parts 2 to 3 [1] to [2], ETSI EN [i.11], ETSI EN parts 5 to 6 [3] to [4], and ETSI EN parts 7 to 8 [i.12] to [i.13]. Further details of the DECT system may be found in the ETSI Technical Reports, ETSI TR [i.1] and ETSI ETR 043 [i.2]. Information about ULE may be found in the ETSI Technical Specifications ETSI TS [i.14] and ETSI TS [i.15]. The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference. SIST EN V2.1.1: (po) (en) 31 str. (G) Standard elektromagnetne združljivosti (EMC) za pomorsko radijsko opremo in storitve - Harmonizirani standard, ki zajema bistvene zahteve člena 3.1b direktive 2014/53/EU - 1. del: Splošne tehnične zahteve ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services - Harmonised Standard covering the essential requirements of article 3.1b of the Directive 2014/53/EU - Part 1: Common technical requirements Osnova: ETSI EN V2.1.1 ( ) ICS: , , The present document contains the common requirements for marine radio communications equipment and associated ancillary equipment, in respect of ElectroMagnetic Compatibility (EMC). The provisions of the present document apply to marine radio equipment not covered in the scope of the Council Directive on marine equipment (the "Marine Equipment Directive" 96/98/EC [i.5]). Product dependent arrangements necessary to perform the EMC tests on dedicated types of marine radio communications equipment, and the assessment of test results, are detailed in the appropriate product related parts of the present document. The present document, together with the product related part, specifies the applicable EMC tests, the methods of measurement, the limits and the performance criteria for marine radio equipment and associated ancillary equipment. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and the relevant product related part of the present document, the product related part takes precedence. For the further content of the present document, the expression "radio equipment" is taken to mean marine radio communications equipment, in each individual case. 24 OBJAVE JUNIJ 2016

24 Technical specifications related to the antenna port of radio equipment and emissions from the enclosure port of radio equipment and combinations of radio and associated ancillary equipment are not included in the present document. Such technical specifications are normally found in the relevant product standards for the effective use of the radio spectrum. The environment classification used in the present document is maritime, as defined in CENELEC EN [1]. Marine radio communications equipment meeting the EMC requirements set out in CENELEC EN [1] is deemed to meet also the EMC requirements for the residential, commercial and light industrial environment as defined in CENELEC EN [i.1] and CENELEC EN [i.2]. The EMC requirements have been selected to ensure an adequate level of compatibility for apparatus intended to be used in the maritime environment. The levels, however, do not cover extreme cases which may occur in any location but with low probability of occurrence. Compliance of radio equipment to the requirements of the present document does not signify compliance to any requirements related to spectrum management or to the use of the equipment (licensing requirements). Compliance to the requirements of the present document does not signify compliance to any safety requirements. However, it is the responsibility of the assessor of the equipment to record in the test report any observations regarding the test sample becoming dangerous or unsafe as a result of the application of the tests called for in the present document. The present document contains requirements to demonstrate an adequate level of electromagnetic compatibility as set out in Directive 2014/30/EU. In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the Radio Equipment Directive [i.4] may apply to equipment within the scope of the present document. SIST EN V2.1.1: (po) (en) 14 str. (D) Standard elektromagnetne združljivosti (EMC) za pomorsko radijsko opremo in storitve - Harmonizirani standard, ki zajema bistvene zahteve člena 3.1b direktive 2014/53/EU - 2. del: Posebni pogoji za radiotelefonske VHF oddajnike in sprejemnike ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services - Harmonised Standard covering the essential requirements of article 3.1b of the Directive 2014/53/EU - Part 2: Specific conditions for VHF radiotelephone transmitters and receivers Osnova: ETSI EN V2.1.1 ( ) ICS: , , The present document together with ETSI EN [1], covers the assessment of VHF radiotelephone transmitters and receivers for the maritime mobile service, and ancillary equipment in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of marine radiotelephone transmitters and receivers are not included in the present document. Such technical specifications are found in the related product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment, and performance criteria for VHF radiotelephone transmitters and receivers for the maritime mobile service, and the associated ancillary equipment. Examples of types of radiotelephone transmitters and receivers for the maritime mobile service covered by the present document are given in annex A. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and ETSI EN [1], the provisions of the present document take precedence. The electromagnetic environment used in the present document to develop the technical specifications encompasses the electromagnetic environment on-board ships as identified in CENELEC EN [i.5]. ANNOUNCEMENTS JUNE

25 SIST EN V2.1.1: (po) (en) 12 str. (C) Standard elektromagnetne združljivosti (EMC) za pomorsko radijsko opremo in storitve - Harmonizirani standard, ki zajema bistvene zahteve člena 3.1b direktive 2014/53/EU - 4. del: Posebni pogoji za sprejemnike ozkopasovne telegrafije z neposrednim tiskanjem (NBDP) NAVTEX ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services - Harmonised Standard covering the essential requirements of article 3.1b of the Directive 2014/53/EU - Part 4: Specific conditions for Narrow-Band Direct-Printing (NBDP) NAVTEX receivers Osnova: ETSI EN V2.1.1 ( ) ICS: , , The present document together with ETSI EN [1] covers the assessment of Narrow-Band Direct-Printing (NBDP) NAVTEX receivers operating in the maritime mobile service, and ancillary equipment in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of NAVTEX receivers are not included in the present document. Such technical specifications are found in the related product standard ETSI EN [i.2] for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment and performance criteria for NAVTEX receivers operating in the maritime mobile service and the associated ancillary equipment. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and ETSI EN [1], the provisions of the present document take precedence. The electromagnetic environment used in the present document to develop the technical specifications encompasses the electromagnetic environment on-board ships as identified in CENELEC EN [i.3]. SIST EN V2.1.1: (po) (en) 15 str. (D) Standard elektromagnetne združljivosti (EMC) za pomorsko radijsko opremo in storitve - Harmonizirani standard, ki zajema bistvene zahteve člena 3.1b direktive 2014/53/EU - 5. del: Posebni pogoji za srednjefrekvenčne in visokofrekvenčne (MF/HF) radiotelefonske oddajnike in sprejemnike ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services - Harmonised Standard covering the essential requirements of article 3.1b of the Directive 2014/53/EU - Part 5: Specific conditions for MF/HF radiotelephone transmitters and receivers Osnova: ETSI EN V2.1.1 ( ) ICS: , , The present document together with ETSI EN [1], covers the assessment of MF/HF radiotelephone transmitters and receivers for the maritime mobile service, and ancillary equipment in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of marine radiotelephone transmitters and receivers are not included in the present document. Such technical specifications are found in the related product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment, and performance criteria for radiotelephone transmitters and receivers for the maritime mobile service and the associated ancillary equipment. Examples of types of MF/HF radiotelephone transmitters and receivers for the maritime mobile service covered by the present document are given in annex A. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and ETSI EN [1], the provisions of the present document take precedence. 26 OBJAVE JUNIJ 2016

26 The electromagnetic environment used in the present document to develop the technical specifications encompasses the electromagnetic environment on-board ships as identified in CENELEC EN [i.3]. SIST EN V2.1.1: (po) (en) 18 str. (E) Standard elektromagnetne združljivosti (EMC) za pomorsko radijsko opremo in storitve - Harmonizirani standard, ki zajema bistvene zahteve člena 3.1b direktive 2014/53/EU - 6. del: Posebni pogoji za zemeljske postaje na ladjah, delujoče v frekvenčnih pasovih nad 3 GHz ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services - Harmonised Standard covering the essential requirements of article 3.1b of the Directive 2014/53/EU - Part 6: Specific conditions for Earth Stations on board Vessels operating in frequency bands above 3 GHz Osnova: ETSI EN V2.1.1 ( ) ICS: , , The present document together with ETSI EN [1], covers the assessment of MF/HF radiotelephone transmitters and receivers for the maritime mobile service, and ancillary equipment in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of marine radiotelephone transmitters and receivers are not included in the present document. Such technical specifications are found in the related product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment, and performance criteria for radiotelephone transmitters and receivers for the maritime mobile service and the associated ancillary equipment. Examples of types of MF/HF radiotelephone transmitters and receivers for the maritime mobile service covered by the present document are given in annex A. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and ETSI EN [1], the provisions of the present document take precedence. The electromagnetic environment used in the present document to develop the technical specifications encompasses the electromagnetic environment on-board ships as identified in CENELEC EN [i.3]. SIST EN V2.1.1: (po) (en) 67 str. (K) Storitev kopenskih mobilnih komunikacij - Radijska oprema, ki uporablja modulacijo s konstantno ali nekonstantno ovojnico in deluje na kanalu s pasovno širino 25 khz, 50 khz, 100 khz ali 150 khz - Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU Land Mobile Service - Radio equipment using constant or non-constant envelope modulation operating in a channel bandwidth of 25 khz, 50 khz, 100 khz or 150 khz - Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU Osnova: ETSI EN V2.1.1 ( ) ICS: , The present document covers the technical requirements for radio transmitters and receivers used in stations and technical requirements for TMO repeater in the Private Mobile Radio (PMR) service. It applies to use in the land mobile service, operating on radio frequencies between 30 MHz and 3 GHz, with channel separations of 25 khz, 50 khz, 100 khz and 150 khz. ANNOUNCEMENTS JUNE

27 It applies to equipment for continuous and/or discontinuous transmission of data and/or digital speech. The equipment (base station and mobile station) comprises a transmitter and associated encoder and modulator and/or a receiver and associated demodulator and decoder. The types of equipment covered by the present document are as follows: base station (equipment fitted with an antenna connector, intended for use in a fixed location); mobile station (equipment fitted with an antenna connector, normally used in a vehicle or as a transportable); TMO Repeater; and those hand portable stations: a) fitted with an antenna connector; or b) without an external antenna connector (integral antenna equipment), but fitted with a permanent internal or a temporary internal 50 Ω Radio Frequency (RF) connector which allows access to the transmitter output and the receiver input. Hand portable equipment without an external or internal RF connector and without the possibility of having a temporary internal 50 Ω RF connector is not covered by the present document. These specifications do not necessarily include all the characteristics which may be required by a user of equipment, nor do they necessarily represent the optimum performance achievable. The present document contains requirements to demonstrate that "... Radio equipment shall be so constructed that it both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference" and that "...radio equipment supports certain features ensuring access to emergency services" [i.3]. In addition to the present document, other ENs (e.g. ETSI EN [i.7] and ETSI EN [i.8]) that specify technical requirements in respect of essential requirements under the Radio Equipment Directive [i.3], may apply to equipment within the scope of the present document. SIST EN V2.1.1: (po) (en) 52 str. (J) Prenosna radiotelefonska oprema VHF za pomorsko mobilno storitev, ki deluje v pasovih VHF z vgrajenim ročnim digitalnim selektivnim klicem (DSC) razreda D - Harmonizirani standard, ki zajema bistvene zahteve členov 3.2 in 3.3(g) direktive 2014/53/EU Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC -Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU Osnova: ETSI EN V2.1.1 ( ) ICS: , The present document states the minimum technical characteristics and methods of measurement required for portable Very High Frequency (VHF) radiotelephones with integrated handheld class D DSC operating in certain frequency bands allocated to the maritime mobile service using either 25 khz channels or 25 KHz and 12,5 khz channels. The present document also specifies technical characteristics, methods of measurement and required test results. The present document contains requirements to demonstrate that "... radio equipment shall be so constructed that it both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference" and that "...radio equipment supports certain features ensuring access to emergency services" [i.5]. 28 OBJAVE JUNIJ 2016

28 SIST EN V2.1.1: (po) (en) 30 str. (G) Pomorski osebni javljalnik za usmerjanje proti cilju, ki deluje na frekvenci 121,5 MHz, namenjen samo za iskanje in reševanje - Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU Maritime Personal Homing Beacon intended for use on the frequency 121,5 MHz for search and rescue purposes only - Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU Osnova: ETSI EN V2.1.1 ( ) ICS: , The present document lays down the minimum requirements for maritime "Personal Homing Radio Beacon for 121,5 MHz search and rescue purposes", and incorporates the relevant provisions of the International Telecommunication Union (ITU) radio regulations. Operational radio beacons described in the present document are intended only for transmission of radio signals on the frequency 121,5 MHz for locating purposes. Beacons for training purposes will be frequency programmed in accordance with national licensing. It should be noted that licensing for such use is also dependent on the administration responsible for the waters where the equipment is operated and not the registered flag state. The present document applies to radio beacons intended for short-range maritime personal homing applications. For this application, both the radiated power and the length of time of operation are reduced to enable the equipment to be sufficiently small and light to be worn comfortably at all times. The present document also specifies technical characteristics, methods of measurement and required test results. The present document contains requirements to demonstrate that "... Radio equipment shall be so constructed that it both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference" [i.1]. SIST EN V2.1.1: (po) (en) 46 str. (I) Storitev kopenskih mobilnih komunikacij - Specifikacija večkanalnega oddajnika za storitev PMR - Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU Land Mobile Service - Multichannel transmitter specification for the PMR Service - Harmonised Standard covering the essential requirements of article 3.2 of the DIrective 2014/53/EU Osnova: ETSI EN V2.1.1 ( ) ICS: , The present document covers the technical requirements for multiple channel radio transmitters used in stations in the Private Mobile Radio (PMR) service. It applies to use in the land mobile service, operating on radio frequencies between 30 MHz and 3 GHz, with channel separations of < 10 khz, 12,5 khz, 20 khz, 25 khz, 50 khz, 100 khz and 150 khz. It applies to equipment for continuous and/or discontinuous transmission of data and/or digital speech and/or analogue speech and using constant envelope or non-constant envelope modulation. The equipment comprises a transmitter capable of simultaneous amplification or transmission on two or more RF channels, or an amplifier which when operated with transmitter equipment provides simultaneous transmission on two or more RF channels. The types of equipment covered by the present document are as follows: base station (equipment fitted with an antenna connector, intended for use in a fixed location); mobile station (equipment fitted with an antenna connector, normally used in a vehicle or as a transportable); ANNOUNCEMENTS JUNE

29 those hand portable stations: a) fitted with an antenna connector; or b) without an external antenna connector (integral antenna equipment), but fitted with a permanent internal or a temporary internal 50 Ω Radio Frequency (RF) connector which allows access to the transmitter output; and any equipment that may be used in combination with any of the above equipments when directly connected to those equipments for the amplification of the transmitter output signals of two or more individual equipments. Types of equipment not covered by the present document are as follows: hand portable equipment without an external or internal RF connector and without the possibility of having a temporary internal 50 Ω RF connector is not covered by the present document; any equipment using passive combining solutions where each transmitter connected to the passive combining system transmits on a single channel, as detailed in ETSI EG [i.2], clause H.3. These specifications apply to the transmitter or transmitter amplifier only. If a receiver is fitted to the same equipment, the receiver specifications in the relevant specification (references [i.5] to [i.12]) also apply. These specifications do not necessarily include all the characteristics that may be required by a user of equipment, nor do they necessarily represent the optimum performance achievable. In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the Radio Equipment Directive [i.3] may apply to equipment within the scope of the present document. SIST EN V12.5.1: (po) (en) 19 str. (E) Globalni sistem mobilnih komunikacij (GSM) - Ponavljalniki GSM - Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU Global System for Mobile communications (GSM) - GSM Repeaters - Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU Osnova: ETSI EN V ( ) ICS: The present document applies to the following radio equipment types: 1) Repeaters for GSM. This radio equipment type is capable of operating in all or any part of the frequency bands given in table 1-1. NOTE 1: In some circumstances, for instance when an operator (or more than one operator who co-ordinate the use of repeaters), is not allocated a complete band as defined in table 1-1, it may be 30 OBJAVE JUNIJ 2016

Izvlečki SIST. Slovenski inštitut za standardizacijo Slovenian Institute for Standardization. Sporočila Messages ISSN

Izvlečki SIST. Slovenski inštitut za standardizacijo Slovenian Institute for Standardization. Sporočila Messages ISSN Izvlečki 6 2016 SIST Slovenski inštitut za standardizacijo Slovenian Institute for Standardization Sporočila Messages ISSN 1854-1631 6 KONTAKTNA TOČKA IN PRODAJA PUBLIKACIJ Kontaktna točka tematske poizvedbe

More information

Izvlečki SIST

Izvlečki SIST Izvlečki 3 2016. SIST Slovenski inštitut za standardizacijo Slovenian Institute for Standardization Sporočila Messages ISSN 1854-1631 3 INFORMACIJSKA TOČKA IN PRODAJA PUBLIKACIJ Informacijska točka tematske

More information

Izvlečki SIST

Izvlečki SIST Izvlečki 3 2018. SIST Slovenski inštitut za standardizacijo Slovenian Institute for Standardization Sporočila Messages ISSN 1854-1631 3 KONTAKTNA TOČKA IN PRODAJA PUBLIKACIJ Kontaktna točka tematske poizvedbe

More information

Izvlečki SIST

Izvlečki SIST Izvlečki 0 2017. SIST Slovenski inštitut za standardizacijo Slovenian Institute for Standardization Sporočila Messages ISSN 1854-1631 0 KONTAKTNA TOČKA IN PRODAJA PUBLIKACIJ Kontaktna točka tematske poizvedbe

More information

The Laboratory is qualified to update standards identifying the test procedures.

The Laboratory is qualified to update standards identifying the test procedures. Page 1 of 19 The Laboratory is qualified to update standards identifying the test procedures. Tests: 2/1 Tensile test at ambient temperature IP No. 07002T001 (ČSN EN ISO 6892-1, ČSN EN ISO 15630-1, 2,

More information

Izvlečki SIST. Slovenski inštitut za standardizacijo Slovenian Institute for Standardization. Sporočila Messages ISSN

Izvlečki SIST. Slovenski inštitut za standardizacijo Slovenian Institute for Standardization. Sporočila Messages ISSN Izvlečki 2016. SIST Slovenski inštitut za standardizacijo Slovenian Institute for Standardization Sporočila Messages ISSN 1854-1631 9 KONTAKTNA TOČKA IN PRODAJA PUBLIKACIJ Kontaktna točka tematske poizvedbe

More information

The Laboratory is qualified to update standards identifying the test procedures.

The Laboratory is qualified to update standards identifying the test procedures. Page 1 of 17 The Laboratory is qualified to update standards identifying the test procedures. Tests: 2/1 Tensile test at ambient temperature IP No. 07002T001 (ČSN EN ISO 6892-1, ČSN EN ISO 15630-1, 2,

More information

Seznam akreditiranih metod. Laboratorij za toplotno zaščito in akustiko

Seznam akreditiranih metod. Laboratorij za toplotno zaščito in akustiko Tip obsega: fleksibilen (možnost uvajanja manjših sprememb ) / Type of scope: flexible (possibility of implementing minor modifications of the method) Mesto izvajanja: v laboratoriju / Sit e: in the laboratory

More information

STS Directory Accreditation number: STS 0030

STS Directory Accreditation number: STS 0030 International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 BSL Baustofflabor AG Postgässli 23a 3661 Uetendorf Head: Felix Solcà Responsible for MS: Dr. Benjamin Kaeser Telephone:

More information

Izvlečki SIST. Slovenski inštitut za standardizacijo Slovenian Institute for Standardization. Sporočila Messages ISSN

Izvlečki SIST. Slovenski inštitut za standardizacijo Slovenian Institute for Standardization. Sporočila Messages ISSN Izvlečki 4 2016 SIST Slovenski inštitut za standardizacijo Slovenian Institute for Standardization Sporočila Messages ISSN 1854-1631 4 KONTAKTNA TOČKA IN PRODAJA PUBLIKACIJ Kontaktna točka tematske poizvedbe

More information

PRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LP-107

PRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LP-107 Reg. št. / Ref. : 3150-0026/15-0005 Datum izdaje / Issued on: 16. februar 2018 Zamenjuje izdajo z dne / Replaces Annex dated: 28. december 2017 spletni strani SA,. the SA website,. PRILOGA K AKREDITACIJSKI

More information

Aggregates Table 1 No. Title Options

Aggregates Table 1 No. Title Options Aggregates Table 1 BS EN 932-1 Methods for sampling From stockpiles BS EN 932-2 Methods for reducing laboratory samples BS EN 932-3 BS EN 933-1 BS EN 933-2 Procedure and terminology for simplified petrographic

More information

Vydané medzinárodné normy a iné publikácie IEC za obdobie od do

Vydané medzinárodné normy a iné publikácie IEC za obdobie od do Vydané medzinárodné normy a iné publikácie IEC za obdobie od 1. 1. 2016 do 31. 1. 2016 IEC TC/SC Dokument Dátum vydania Názov ISO/IEC JTC 1/SC 6 ISO/IEC/IEEE 8802-1AX:2016 2016-01-14 Information technology

More information

Joint Stock Company Alzida Savanorių pr. 221, LT Vilnius, Lithuania

Joint Stock Company Alzida Savanorių pr. 221, LT Vilnius, Lithuania page 1 (13) Joint Stock Company Alzida Savanorių pr. 221, LT- 02300 Vilnius, Lithuania SCOPE OF ACCREDITATION (flexible) No. Name of the testing object Name of the parameters (characteristics) to be tested

More information

Andrew Cooper Cooper Research Technology. Talar du engelska?

Andrew Cooper Cooper Research Technology. Talar du engelska? Andrew Cooper Cooper Research Technology Talar du engelska? 1 Topics of this presentation EN12697-26 Stiffness EN12697-25 Cyclic compression EN12697-24 Fatigue EN12697-22 Wheel tracking EN12697 Specimen

More information

asphalt applications European Asphalt Standards and their application in the UK mpa asphalt Asphalt Information Service Mineral Products Association

asphalt applications European Asphalt Standards and their application in the UK mpa asphalt Asphalt Information Service Mineral Products Association asphalt applications 12 European Standards and their application in the UK Information Service mpa asphalt November 2009 Mineral Products Association PD 6691 and the BS EN 13108 series Wherever a reference

More information

STS Directory Accreditation number: STS 0329

STS Directory Accreditation number: STS 0329 International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 Laboroute SA Laboratoire de recherche et de contrôle des matériaux routiers Route de l Industrie 78 CH-1564 Domdidier

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CLC/TS 50625-3-1 January 2015 ICS 29.100.01; 13.030.99; 31.220.01 English Version Collection, logistics & treatment requirements

More information

Construction Products Directive

Construction Products Directive Construction Products Directive Evaluation of conformity of Coated glass to he N 1096-4 ( September 2006) G E P V P, T H E E U R O P E A N A S S O C I AT I O N O F F L AT G L A S S M A N U FA C T U R E

More information

STS Directory Accreditation number: STS 0099

STS Directory Accreditation number: STS 0099 International standard: ISO/IEC 7025:2005 Swiss standard: SN EN ISO/IEC 7025:2005 Prüflabor AG ( ) Rorschacherstrasse 07 9402 Mörschwil Subsidiary: Prüflabor AG ( 2) Müllheimerstrasse 5 8554 Müllheim-Wigoltingen

More information

Annex of the certificate (Page 1/5) Accreditation Scope

Annex of the certificate (Page 1/5) Accreditation Scope Annex of the certificate (Page 1/5) Accreditation Scope As a Testing Laboratory Tested Materials / Products EX LABORATORY Metallic materials Construction products Address: Küçük Çiğli Mh. 8780/1 Sk. No:5

More information

Izvlečki SIST. Slovenski inštitut za standardizacijo Slovenian Institute for Standardization. Sporočila Messages ISSN

Izvlečki SIST. Slovenski inštitut za standardizacijo Slovenian Institute for Standardization. Sporočila Messages ISSN Izvlečki 10 2017 SIST Slovenski inštitut za standardizacijo Slovenian Institute for Standardization Sporočila Messages ISSN 1854-1631 10 KONTAKTNA TOČKA IN PRODAJA PUBLIKACIJ Kontaktna točka tematske poizvedbe

More information

VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CENELEC za obdobie od do

VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CENELEC za obdobie od do VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CENELEC za obdobie od 1. 6. 2017 do 30. 6. 2017 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo

More information

Nr. Standard reference Title 1 EN 54-28:2016. Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors

Nr. Standard reference Title 1 EN 54-28:2016. Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors Nr. Standard reference Title 1 EN 54-28:2016 Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors 2 EN 59:2016 Glass reinforced plastics - Determination of indentation

More information

Seznam akreditiranih metod Laboratorij za cemente, malte in keramiko

Seznam akreditiranih metod Laboratorij za cemente, malte in keramiko ima delno fleksibilni obseg (glej prilogo k akreditacijski listini LP 005), zato so v spodnji tabeli navedene izdaje standardov, po katerih se trenutno izvajajo preskušanja. Tabela 1/ Table 1 Tip obsega:

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60312-1 Edition 1.0 2010-09 Vacuum cleaners for household use Part 1: Dry vacuum cleaners Methods for measuring the performance INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE

More information

Nr. Standard reference

Nr. Standard reference Nr. Standard reference 1 EN 54-5:2017 2 EN ISO 5395-3:2013/A1:2017 3 EN 12574-1:2017 4 EN 16573:2017 Title Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors Garden equipment

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60770-3 First edition 2006-04 Transmitters for use in industrial-process control systems Part 3: Methods for performance evaluation of intelligent transmitters IEC 2006 Copyright

More information

This is a preview - click here to buy the full publication INTERNATIONAL ELECTROTECHNICAL COMMISSION

This is a preview - click here to buy the full publication INTERNATIONAL ELECTROTECHNICAL COMMISSION INTERNATIONAL ELECTROTECHNICAL COMMISSION GUIDE 111 Second edition 2004-07 Electrical high-voltage equipment in high-voltage substations Common recommendations for product standards IEC 2004 Copyright

More information

Metode preskušanja cementa - 1. del: Določanje trdnosti Methods of testing cement - Part 1: Determination of strength

Metode preskušanja cementa - 1. del: Določanje trdnosti Methods of testing cement - Part 1: Determination of strength ima delno fleksibilni obseg (glej prilogo k akreditacijski listini LP 005), zato so v spodnji tabeli navedene izdaje standardov, po katerih se trenutno izvajajo preskušanja. Tabela 1/ Table 1 Tip obsega:

More information

Seznam akreditiranih metod Laboratorij za cemente, malte in keramiko

Seznam akreditiranih metod Laboratorij za cemente, malte in keramiko ima delno fleksibilni obseg (glej prilogo k akreditacijski listini LP 005), zato so v spodnji tabeli navedene izdaje standardov, po katerih se trenutno izvajajo preskušanja. Tabela 1/ Table 1 Tip obsega:

More information

Schedule of Accreditation

Schedule of Accreditation Schedule of Accreditation Organisation Name Trading As INAB Reg No 6023 Contact Name Address BRE Global Assurance (Ireland) Ltd David Gall Contact Phone No +353 1 882 4344 Email Website Accreditation Standard

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61000-4-3 Edition 2.1 2002-09 Edition 2:2002 consolidated with amendment 1:2002 BASIC EMC PUBLICATION Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques

More information

This is a preview - click here to buy the full publication. High-voltage switchgear and controlgear

This is a preview - click here to buy the full publication. High-voltage switchgear and controlgear IEC/PAS 62271-109 Edition 1.0 2002-07 High-voltage switchgear and controlgear Part 109: Alternating-current series capacitor by-pass switches PUBLICLY AVAILABLE SPECIFICATION INTERNATIONAL ELECTROTECHNICAL

More information

Recent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees

Recent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees INTERNATIONAL ELECTROTECHNICAL COMMISSION Recent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees Don Heirman presenting for Robert Sitzmann (TC 62) APEMC symposium

More information

An Introduction to Soil Stabilization for Pavements

An Introduction to Soil Stabilization for Pavements An Introduction to Soil Stabilization for Pavements J. Paul Guyer, P.E., R.A. Paul Guyer is a registered mechanical engineer, civil engineer, fire protection engineer and architect with over 35 years experience

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Exova (UK) Limited trading as Warrington Certification Issue No: 033 Issue date: 06 November 2017 to provide product conformity Holmesfield

More information

SEZNAM AKREDITIRANIH METOD V PRESKUSNEM LABORATORIJU IRMA (LP-008) / LIST OF ACCREDITED METHODS IN TESTING LABORATORY IRMA (LP-008)

SEZNAM AKREDITIRANIH METOD V PRESKUSNEM LABORATORIJU IRMA (LP-008) / LIST OF ACCREDITED METHODS IN TESTING LABORATORY IRMA (LP-008) SEZNAM AKREDITIRANIH METOD V PRESKUSNEM LABORATORIJU IRMA (LP-008) / LIST OF ACCREDITED METHODS IN TESTING LABORATORY IRMA (LP-008) 1 AKREDITIRANI ORGAN / Accredited body IRMA d.o.o. Ljubljana Slovenčeva

More information

IEC NORMAS PUBLICADAS. As normas ISO/IEC já estão relacionadas em normas ISO Publicadas

IEC NORMAS PUBLICADAS. As normas ISO/IEC já estão relacionadas em normas ISO Publicadas IEC NORMAS PUBLICADAS As normas ISO/IEC já estão relacionadas em normas ISO Publicadas IEC/TC 1 - Terminology IEC 60050-161-am5 ed1.0 (2015-02) - Amendment 5 - International Electrotechnical Vocabulary

More information

IEC NORMAS PUBLICADAS SETEMBRO E OUTUBRO DE 2018

IEC NORMAS PUBLICADAS SETEMBRO E OUTUBRO DE 2018 IEC NORMAS PUBLICADAS SETEMBRO E OUTUBRO DE 2018 IEC/TC 2 - Rotating machinery IEC 60034-14:2018 - Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56

More information

DRAFT TANZANIA STANDARD

DRAFT TANZANIA STANDARD EDC 4 (5313) P3 DRAFT TANZANIA STANDARD (Draft for comments only) Specification for Handheld Metal Detectors for Use in Weapon Detection TANZANIA BUREAU OF STANDARDS TBS 2018 First Edition 2018 0 National

More information

Sound absorption coefficient Equivalent sound absorption area Sound absorption coefficient Sound absorption class

Sound absorption coefficient Equivalent sound absorption area Sound absorption coefficient Sound absorption class Annex 1 to the Accreditation Certificate No. LA.01.028 issued on 18-12-2015, approved on 18-12-2015 by the Order No. AK-200 of Director of National Accreditation Bureau under the Ministry of 1 (8) pages

More information

ASSOCIATION POUR LA CERTIFICATION DES MATERIAUX ISOLANTS

ASSOCIATION POUR LA CERTIFICATION DES MATERIAUX ISOLANTS Revision index Effective date C 15/02/2015 ASSOCIATION POUR LA CERTIFICATION DES MATERIAUX ISOLANTS 4, avenue du Recteur-Poincaré, 75782 Paris Cedex 16 Tel. 33 (0)1.64.68.84.97 Fax. 33 (0)1.64.68.83.45

More information

IEC PROJETOS EM VOTAÇÃO

IEC PROJETOS EM VOTAÇÃO IEC PROJETOS EM VOTAÇÃO IEC/TC 10 - Fluids for electrotechnical applications. ATÉ 25 DE JULHO DE 2014 IEC 60599 Ed.3: Mineral oil-impregnated electrical equipment in service - Guide to the interpretation

More information

Fact File 75. Published Document PD CEN/TS 54-32:2015 Fire detection and fire alarm systems

Fact File 75. Published Document PD CEN/TS 54-32:2015 Fire detection and fire alarm systems Fact File 75 Published Document PD CEN/TS 54-32:2015 Fire detection and fire alarm systems Published Document PD CEN/TS 54-32:2015 Fire detection and fire alarm systems INTRODUCTION... 3 BACKGROUND...

More information

In Search of Standard Reference Materials (SRMs) for ASTM E05 Fire Standards by. Norman Alvares & Harry Hasegawa

In Search of Standard Reference Materials (SRMs) for ASTM E05 Fire Standards by. Norman Alvares & Harry Hasegawa In Search of Standard Reference Materials (SRMs) for ASTM E05 Fire Standards by Norman Alvares & Harry Hasegawa First Paragraph of E-691 Tests performed on presumably identical materials in presumably

More information

Izvlečki SIST

Izvlečki SIST Izvlečki 10 2016. SIST Slovenski inštitut za standardizacijo Slovenian Institute for Standardization Sporočila Messages ISSN 1854-1631 10 KONTAKTNA TOČKA IN PRODAJA PUBLIKACIJ Kontaktna točka tematske

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Wolverhampton Laboratory Millfields Road Ettingshall Wolverhampton

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Washington Laboratories, Ltd. 7560 Lindbergh

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61514-2 First edition 2004-01 Industrial process control systems Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs IEC 2004

More information

APPLICATION BRIEF. Model 4140/4141 Gyratory Compactor Specimen Preparation in Superpave Mix Design. April 2009

APPLICATION BRIEF. Model 4140/4141 Gyratory Compactor Specimen Preparation in Superpave Mix Design. April 2009 APPLICATION BRIEF Model 4140/4141 Gyratory Compactor Specimen Preparation in Superpave Mix Design April 2009 Introduction From 1987 through 1993, the United States Strategic Highway Research Program (SHRP)

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60519-1 Third edition 2003-07 Safety in electroheat installations Part 1: General requirements Sécurité dans les installations électrothermiques Partie 1: Exigences générales

More information

Nomenclature. 1.4 Sand equivalent dimensions measurement, weight measurement STN EN PP-001 X

Nomenclature. 1.4 Sand equivalent dimensions measurement, weight measurement STN EN PP-001 X Scope of the accreditation Name of the accredited body: Building testing and research institute, n. o. Studená 3, 821 04 Bratislava, Slovakia Testing laboratory ID Number: 31 821 987 Testing workplace

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11035-03-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 25.10.2017 to 24.10.2022 Holder of certificate: DMT

More information

ISO Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Laser assembly

ISO Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Laser assembly INTERNATIONAL STANDARD ISO 22827-1 First edition 2005-10-15 Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 1: Laser assembly Essais de réception pour

More information

STS Directory Accreditation number: STS 0021

STS Directory Accreditation number: STS 0021 International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 LPM AG Labor für Prüfung und Materialtechnologie Tannenweg 10 5712 Beinwil am See Head: Responsible for MS: Ruedi Herren

More information

ISO/TS TECHNICAL SPECIFICATION

ISO/TS TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION ISO/TS 10811-1 First edition 2000-06-01 Mechanical vibration and shock Vibration and shock in buildings with sensitive equipment Part 1: Measurement and evaluation Vibrations et

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61000-4-8 Edition1.1 2001-03 Edition 1:1993 consolidated with amendment 1:2000 BASIC EMC PUBLICATION Electromagnetic compatibility (EMC) Part 4-8: Testing and measurement techniques

More information

Examination of CPR based harmonised product standards with a view of identifying the classes and threshold levels included in them

Examination of CPR based harmonised product standards with a view of identifying the classes and threshold levels included in them Ref. Ares(2018)234778-15/01/2018 MetSta Hanna Järvenpää Examination of CPR based harmonised product standards with a view of identifying the classes and threshold levels included in them 12.10.2017 Executive

More information

Construction Products Directive

Construction Products Directive Construction Products Directive Evaluation of conformity of Heat soaked thermally toughened soda lime silicate safety glass to he N 14179-2 ( September 2006) G E P V P, T H E E U R O P E A N A S S O C

More information

Radio Society EMC Advice Leaflet EMC 03 of Great Britain

Radio Society EMC Advice Leaflet EMC 03 of Great Britain Radio Society EMC Advice Leaflet EMC 03 of Great Britain Dealing with security alarm EMC problems Purpose of this Leaflet This leaflet, "Dealing with alarm EMC problems" is intended for RSGB members' own

More information

PRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LP- 099

PRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LP- 099 Reg. št. / Ref. : 3150-0002/12-0013 Datum izdaje / Issued on: 22. december 2017 Zamenjuje izdajo z dne / Replaces Annex dated: 21. julij 2016 spletni strani SA,. the SA website,. PRILOGA K AKREDITACIJSKI

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61400-11 Edition 2.1 2006-11 Edition 2:2002 consolidated with amendment 1:2006 Wind turbine generator systems Part 11: Acoustic noise measurement techniques Reference number

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60044-7 First edition 1999-12 Instrument transformers Part 7: Electronic voltage transformers This English-language version is derived from the original bilingual publication

More information

The WWA Standard for manufacturing wood windows and window performance

The WWA Standard for manufacturing wood windows and window performance Wood Knowledge Wales and Bron Afron Community Housing The Case For Wood Windows The WWA Standard for manufacturing wood windows and window performance Kevin Underwood Wood Window Alliance Introduction

More information

Recent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees

Recent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees INTERNATIONAL ELECTROTECHNICAL COMMISSION Recent Topics in IEC TC 62 (Electrical Equipment in Medical Practice) and its Subcommittees Don Heirman presenting for Robert Sitzmann (TC 62) APEMC symposium

More information

Annex to the Accreditation Certificate D-PL according to ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-12121-01-00 according to ISO/IEC 17025:2005 Period of validity: 24.03.2017 to 30.09.2019 Holder of certificate: STC (Dongguan)

More information

Project Status Hold. Defines requirements and test methods for marketed and delivered automotive diesel fuel.

Project Status Hold. Defines requirements and test methods for marketed and delivered automotive diesel fuel. Revision of National Annex to I.S. EN 14214 Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods Current_Phase

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 18738-2 First edition 2012-10-15 Measurement of ride quality Part 2: Escalators and moving walks Mesure de la qualité de déplacement Partie 2: Escaliers mécaniques et trottoirs

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60455-2 Edition 3.0 2015-06 Resin based reactive compounds used for electrical insulation Part 2: Methods of test INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 17.220.99; 29.035.01

More information

GASTEC QA. Approval Requirements 69-1

GASTEC QA. Approval Requirements 69-1 KE 69-1 May 2014 GASTEC QA Approval Requirements 69-1 for the GASTEC QA product certificate for Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings Foreword

More information

Guidelines accompanying:

Guidelines accompanying: EUROPEAN COMMISSION DIRECTORATE-GENERAL FOR ENERGY Directorate C - Renewables, Research and Innovation, Energy Efficiency C.3 - Energy efficiency Guidelines accompanying: Commission Delegated Regulation

More information

This annex is valid from: to Replaces annex dated: Prolonged until

This annex is valid from: to Replaces annex dated: Prolonged until Registration : L 022 This annex is valid from: 13-09-2017 to 01-03-2018 Replaces annex dated: 13-06-2016 Prolonged until 01-09-2018 Meander 1051 6825 MJ Arnhem The Netherlands Location(s) where activities

More information

ORIGA-SENSOFLEX Displacement Measuring System for Cylinder Series OSP-P

ORIGA-SENSOFLEX Displacement Measuring System for Cylinder Series OSP-P ORIGA-SENSOFLEX Displacement Measuring System for Cylinder Series OSP-P Contents Description Data Sheet No. Page Overview P-1.50.001E 117-118 Technical Data SFI-plus P-1.50.002E-1, 2 119-120 Dimensions

More information

Coatings for protection of FRP structures with heavy rain erosion loads

Coatings for protection of FRP structures with heavy rain erosion loads CLASS PROGRAMME Type approval DNVGL-CP-0424 Edition May 2016 Coatings for protection of FRP structures with heavy rain erosion loads The content of this service document is the subject of intellectual

More information

This annex is valid from: to Replaces annex dated: Locations where activities are performed under accreditation

This annex is valid from: to Replaces annex dated: Locations where activities are performed under accreditation Annex to ISO/IEC 7025:2005 declaration also Chamber Commerce no. 246437 This annex is valid from: 06-2-206 to 0-2-207 Replaces annex dated: 25-06-205 Locations where activities are performed under accreditation

More information

Izvlečki SIST. Slovenski inštitut za standardizacijo Slovenian Institute for Standardization. Sporočila Messages ISSN

Izvlečki SIST. Slovenski inštitut za standardizacijo Slovenian Institute for Standardization. Sporočila Messages ISSN Izvlečki 11 2016 SIST Slovenski inštitut za standardizacijo Slovenian Institute for Standardization Sporočila Messages ISSN 1854-1631 11 KONTAKTNA TOČKA IN PRODAJA PUBLIKACIJ Kontaktna točka tematske poizvedbe

More information

Lloyd s Register Type Approval System Test Specification Number 3

Lloyd s Register Type Approval System Test Specification Number 3 Working together for a safer world Lloyd s Register Type Approval System Test Specification Number 3 July 2015 Performance Test Specification for Equipment to be used in Marine Applications: Electric Cables

More information

CEN/TC 33 - Doors, windows, shutters, building hardware and curtain walling. EN 107:1980 Methods of testing windows - Mechanical test 89/106/EEC

CEN/TC 33 - Doors, windows, shutters, building hardware and curtain walling. EN 107:1980 Methods of testing windows - Mechanical test 89/106/EEC C/TC 33 - Doors, windows, shutters, building hardware and curtain walling Standard reference Title Directive 107:1980 Methods of testing windows - Mechanical test 129:1984 130:1984 179:2008 477:1995 478:1995

More information

FIRE DYNAMICS IN FAÇADE FIRE TESTS: Measurement, modeling and repeatability

FIRE DYNAMICS IN FAÇADE FIRE TESTS: Measurement, modeling and repeatability Proceedings of the International Conference in Dubrovnik, 15-16 October 2015 FIRE DYNAMICS IN FAÇADE FIRE TESTS: Measurement, modeling and repeatability Johan Anderson a, Lars Boström a, Robert Jansson

More information

OPTIMIZATION OF THE MAGNETIC FIELD IN A MAGNETIC REFRIGERATOR

OPTIMIZATION OF THE MAGNETIC FIELD IN A MAGNETIC REFRIGERATOR UDK621.3:(53+54+621 +66), ISSN0352-9045 Informacije MIDEM 39(2009)2, Ljubljana OPTIMIZATION OF THE MAGNETIC FIELD IN A MAGNETIC REFRIGERATOR Jaka Tusek 1, Alen Sarlah 1, Alojz Poredos 1, Dusan Fefer 2

More information

NSAI Active work programme 05/02/2018

NSAI Active work programme 05/02/2018 Project reference S.R. 28:201x - Revision Project title Recommendation for the use and implementation of the I.S. EN 13108 series bituminous mixtures material specifications Current_Phase Post Public Enquiry

More information

SCOPE OF ACCREDITATION

SCOPE OF ACCREDITATION SCOPE OF ACCREDITATION Vipac Engineers and Scientists Ltd T/A Gas Technology Services Victorian Laboratory Address Details: Victorian Technology Centre 275-283 Normanby Road PORT MELBOURNE, VIC AUSTRALIA

More information

NEWS STANDARDS: 2017/01

NEWS STANDARDS: 2017/01 NEWS STANDARDS: 2017/01 IEC 60050-723:1997/AMD2:2016 - Amendment 1 - International electrotechnical vocabulary - Part 723: Broadcasting: Sound, television, data IEC 60794-2-22:2016 - Optical fibre cables

More information

S TAR-ORION S OUTH D IAMOND P ROJECT E NVIRONMENTAL I MPACT S TATEMENT APPENDIX A FUNDAMENTALS OF ACOUSTICS

S TAR-ORION S OUTH D IAMOND P ROJECT E NVIRONMENTAL I MPACT S TATEMENT APPENDIX A FUNDAMENTALS OF ACOUSTICS APPENDIX 5.2.5-A FUNDAMENTALS OF ACOUSTICS Definition of Acoustical Terms Acoustics is the study of sound and noise is defined as unwanted sound. Airborne sound is a rapid fluctuation or oscillation of

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60268-4 Third edition 2004-02 Sound system equipment Part 4: Microphones IEC 2004 Copyright - all rights reserved No part of this publication may be reproduced or utilized in

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60335-2-69 Edition 3.1 2005-01 Edition 3:2002 consolidated with amendment 1:2004 Household and similar electrical appliances Safety Part 2-69: Particular requirements for wet

More information

Instructions for use / Alarm unit, Fiber optic cable & Sensor patch ENGLISH

Instructions for use / Alarm unit, Fiber optic cable & Sensor patch ENGLISH Instructions for use / Alarm unit, Fiber optic cable & Sensor patch ENGLISH Manufacturer: Redsense Medical AB Gyllenhammars väg 26 302 92 HALMSTAD SWEDEN www.redsensemedical.com These instructions are

More information

SKG-IKOB Certificatie B.V. Trading under the names SKG, IKOB-BKB and SKW Certificatie

SKG-IKOB Certificatie B.V. Trading under the names SKG, IKOB-BKB and SKW Certificatie Normative document: EN ISO/IEC 7025:2005 This annex is valid from: 24-0-208 to 0-2-202 Replaces annex dated: 06-2-206 Location(s) where activities are performed under accreditation Head Office Poppenbouwing

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60704-2-13 Edition 2.0 2011-01 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 2-13: Particular requirements for

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION IEC TS 62896 Edition 1.0 2015-11 Hybrid insulators for a.c. and d.c. high-voltage applications Definitions, test methods and acceptance criteria INTERNATIONAL ELECTROTECHNICAL COMMISSION

More information

Glass fibre rovings - Non-metallic materials

Glass fibre rovings - Non-metallic materials CLASS PROGRAMME Type approval DNVGL-CP-0082 Edition December 2015 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD

More information

CMS CMS. Template cutout size: 187mm CEILING MONITOR SYSTEMS INSTALLATION MANUAL

CMS CMS. Template cutout size: 187mm CEILING MONITOR SYSTEMS INSTALLATION MANUAL CEILING MONITOR SYSTEMS INSTALLATION MANUAL 401e 401DCe Tannoy has a policy of continuous improvement and this specification sheet provides the latest information at the time of printing. All specifications

More information

รายช อเอกสารใหม (มกราคม-ม นาคม 2559)

รายช อเอกสารใหม (มกราคม-ม นาคม 2559) ABSORPTION รายช อเอกสารใหม (มกราคม-ม นาคม 2559) 2812-3 2012 Paints and varnishes - Determination of resistance to liquids - P.3: Method using an absorbent medium/by International Organization for Standardization

More information

API MANUAL OF PETROLEUM MEASUREMENT STANDARDS

API MANUAL OF PETROLEUM MEASUREMENT STANDARDS API MANUAL OF PETROLEUM MEASUREMENT STANDARDS Chapter 22 Testing Protocols Section 1 General Guidelines for Developing Testing Protocols for Devices Used in the Measurement of Hydrocarbon Fluids Type Testing

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60335-2-17 Second edition 2002-10 Household and similar electrical appliances Safety Part 2-17: Particular requirements for blankets, pads and similar flexible heating appliances

More information

IEC PROJETOS EM VOTAÇÃO SETEMBRO E OUTUBRO. IEC Ed.1: Railway applications - Energy mesurement on board trains - Part 2: Energy measuring

IEC PROJETOS EM VOTAÇÃO SETEMBRO E OUTUBRO. IEC Ed.1: Railway applications - Energy mesurement on board trains - Part 2: Energy measuring IEC PROJETOS EM VOTAÇÃO SETEMBRO E OUTUBRO IEC/TC 9 - Electrical equipment and systems for railways IEC 62888-2 Ed.1: Railway applications - Energy mesurement on board trains - Part 2: Energy measuring

More information

(Notices) EUROPEAN COMMISSION

(Notices) EUROPEAN COMMISSION 14.8.2012 Official Journal of the European Union C 245/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework

More information

Introduction. A soil is an earth concrete. Composition of a soil

Introduction. A soil is an earth concrete. Composition of a soil Introduction Soil is the result of the transformation of the underlying rock under the influence of a range of physical, chemical and biological processes related to biological and climatic conditions

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60335-2-67 Edition 3.1 2005-11 Edition 3:2002 consolidated with amendment 1:2005 Household and similar electrical appliances Safety Part 2-67: Particular requirements for floor

More information