CEN-CENELEC response to the European Commission consultation on H2020 Societal Challenge 5 priorities for
|
|
- Martina Edwards
- 6 years ago
- Views:
Transcription
1 CEN European Committee for Standardization CENELEC European Committee for Electrotechnical Standardization CEN-CENELEC response to the European Commission consultation on H2020 Societal Challenge 5 priorities for June 2014 Introduction The Horizon 2020 programme aims to respond to the evolving needs and opportunities from science and technology, industry, policies and society. Standardization provides a bridge between research, innovation and the market, and can thereby make a positive contribution to economic growth and to meeting the societal challenges that are ahead of Europe. CEN and CENELEC are working towards reinforcing the links between standardisation, innovation and research, and providing a long-term framework to link appropriate research results and innovation with standardization In order to enable standardization to contribute effectively, it is important to consider the role standards and standardization play throughout the whole lifecycle of products and services, from research and innovation to the market. CCMC therefore welcome the opportunity to contribute to the consultation on Horizon 2020 Societal Challenge 5 (SC5) Climate action, environment, resource efficiency and raw materials. Reinforcing the links between standardisation, innovation and research CEN and CENELEC noted with satisfaction that there were many references to standardization in the December 2013 Horizon 2020 calls and related documentation. To even better address the links between standardization and innovation during the next calls under Horizon 2020 (scheduled for December 2014) CCMC provided targeted trainings to a number of Directorates in DG Research and Innovation (DG RTD) including to Directorate I Climate Action and Resource Efficiency (Full list of trainings is : Avenue Marnix Brussels - Belgium Tel: Fax: info@cencenelec.eu -
2 Directorate H Transport, Directorate I Climate Action and Resource Efficiency, Directorate D Key Enabling Technologies (KETs), Directorate F Bio-Economy, Directorate G Energy and Directorate E Health). In support of these trainings, a number of good practices regarding references to standardization in the call documentation were identified. For instance, for innovators and researchers not familiar with the European standardization framework (CEN, CENELEC, ETSI), the reference to common standards can be interpreted as standards (documents) to be developed by the European project. If used in the context of standard as documents developed by the European Standardization Organizations (ESOs), a clearer reference to engage the right stakeholders (National Standardization Organisations, CEN, CENELEC, etc.) will avoid research projects re-defining their own standards. Making a direct link to the ESOs, making direct reference to European Standards or referencing specific European Standards (where relevant) can lead the project proposer to investigate further who they need to address to obtain the correct information. In certain specific cases direct reference can be made to the relevant Technical Committee (TC) which is an activity the CEN-CENELEC Research Helpdesk (research@cencenelec.eu) can support during the drafting of work programmes. The list of technical bodies Technical Committees (TCs) at the end of this contribution is indicative of the number of TCs in CEN and CENELEC that may be relevant. Contacting the CEN-CENELEC Research Helpdesk is also useful where the objective is to contribute to global standards. This is because CEN and CENELEC closely cooperate with their international counterparts, respectively the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). This close cooperation has been materialised by the signature of the Vienna Agreement (ISO-CEN) and the Dresden Agreement (IEC-CENELEC). Both agreements offer a framework for the optimal use of resources and expertise available for standardization work, enabling the approval of European and International Standards developed in a single (European or International) Technical Committee. Standardisation Request in support of implementation of the EU strategy on Adaptation to Climate Change [COM(2013) 216 final] CEN and CENELEC members received and accepted the Standardisation Request in support of implementation of the EU Strategy on Adaptation to Climate Change. CEN and CENELEC members have recognized the need for a dedicated structure that
3 ensures efficient and timely communication and coordination of standardization activities in this area, and set up a 'CEN-CENELEC Coordination Group on Adaptation to Climate Change (ACC-CG). The text of the Standardisation Request refers to research activities supporting, if necessary, the priority standardization activities which will identified during the initial phase of the work. Future contributions to the specific H2020 work programme may therefore be expected. Draft Standardisation Request relating to the setting of ecodesign requirements for energy-related products CCMC has been informed by the Commission that a Standardisation Request is under preparation to develop generic Harmonized Standards that could be applied to any energy-related products to measure: their reusability/recyclability/recoverability (RRR) indexes by mass; their reusability/recyclability/recoverability (RRR) indexes by environmental impact; their durability or that of some of their key components; the time for the reversible disassembly, substitution and re-assembly of their key components; their dismantling time at end-of-life or that of their components. The draft is currently circulated among the CEN and CENELEC Members for their comments. Consultation of stakeholders involved in relevant standardization activities The Commission s consultation has been structured along 7 questions, the nature of which requires the input from sector experts, rather than input from a generic standardization perspective. A number of technical bodies operating under CEN and CENELEC were therefore contacted by CCMC to request the direct input from their experts on this consultation and to forward these inputs directly to the Commission: CEN/TC 19 - Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin CEN/TC Water supply CEN/TC Waste water engineering CEN/TC Water analysis CEN/TC Air quality CEN/TC Characterization of waste CEN/TC Characterization of sludges CEN/TC Solid biofuels
4 CEN/TC Solid Recovered Fuels CEN/TC Characterization of soils CEN/TC Conservation of Cultural Heritage CEN/TC Materials obtained from End-of-Life Tyres (ELT) CEN/TC Sustainably produced biomass for energy applications CEN/TC Project Committee - Horizontal standards in the fields of sludge, biowaste and soil CEN/TC Bio-based products CLC/TC 111X Environment CEN/BT/WG215 - Building Information Modeling (BIM) SABE - the CEN Strategic Advisory Body on Environment To identify these technical bodies, CCMC focussed on Challenge 5 as described in the text of the H2020 Specific Programme. No input was therefore sought from technical bodies linked with related challenges or policies such as challenge 3 SECURE, CLEAN AND EFFICIENT ENERGY or challenge 4 SMART, GREEN AND INTEGRATED TRANSPORT. Many of these technical bodies are expected to participate in the above mentioned 'CEN- CENELEC Coordination Group on Adaptation to Climate Change (ACC-CG). Note: an indicative list of technical bodies to participate in ACC-CG is: CEN/TC 12 - Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries CEN/TC 15 - Inland navigation vessels CEN/TC 89 - Thermal performance of buildings and building components - Published standards CEN/TC Gas infrastructure' CEN/TC Cableways Installations' CEN/TC 'Railway Applications' CEN/TC Aircraft ground support equipment CEN/TC Road vehicles CEN/TC 'Sustainability of construction works CEN/TC Project Committee - Energy Performance of Buildings CEN Construction Core Group CLC/TC 9X - Electrical and electronic applications for railways CLC/TC 8X - 'System aspects of electrical energy supply' CLC/TC 13 - 'Equipment for electrical energy measurement and load control' (active in smart metering field) CLC/TC 57- 'Power systems management and associated information exchange' (active in smart grid field) CLC/TC 111X - Environment CLC/TC 69X - 'Electrical systems for electric road vehicles' CLC/TC Home and Building Electronic Systems
5 About CEN and CENELEC CEN (European Committee for Standardization) and CENELEC (European Committee for Electrotechnical Standardization) are recognised by the EU as European Standardization Organizations responsible for developing and defining standards at European level. These standards set out specifications and procedures (e.g. for measuring and testing) in relation to a wide range of materials, products and services. The members of CEN and CENELEC are the National Standards Bodies and National Electro-technical Committees of 33 European countries including all of the EU member states plus 3 EFTA countries (Iceland, Norway and Switzerland) as well as 2 EU candidate countries (Turkey and the former Yugoslav Republic of Macedonia). European Standards (ENs) are developed through a process of collaboration among experts nominated by business and industry, research institutes, consumer and environmental organisations and other stakeholders. These standards are accepted and recognised in all of the countries covered by CEN and CENELEC members. When correctly applied, they contribute to enhancing safety, improving quality, facilitating cross-border trade and strengthening the European Single Market. CEN and CENELEC work to promote the international alignment of standards in the framework of technical cooperation agreements with ISO (International Organization for Standardization) and the IEC (International Electrotechnical Commission).
Role of Standards in Exploiting Technology and Research
Role of Standards in Exploiting Technology and Research Unit Manager Research Integration, CEN-CENELEC Management Centre Policy Context The Innovation Union, 2010: Standards play an important role for
More informationCEN/TC 391 Business Plan Revision Nov 2010 Page 1 EXECUTIVE SUMMARY
Page 1 EXECUTIVE SUMMARY Business Environment A wide range of threats and hazards can result in destabilising or disruptive events and escalate towards unpredictable and large scale consequences for Societal
More informationAbout European Standards
About European Standards Aquaculture workshop Brussels, Centre Borschette 2017-04-27 Andrea NAM 1 Actors in standardization The European Standardization Organizations (ESOs) The Regional Standardization
More informationThe Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles
The Process of making European Standards Frank Moore Chairman CEN TC/248 Textiles 1 European Standards CEN & CENELEC systems Standards development process Links to legislation International dimension What
More informationEU Best practice of Technical Committees and benefits that could be achieved
EU Best practice of Technical Committees and benefits that could be achieved Ian Greensmith Senior Standards Expert Brussels, 29 th of January 2013 www.inogate.org What is a standard? Standard: document,
More informationcooperation in standardization Gonçalo Ascensão Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012
Perspectives and benefits of international cooperation in standardization Gonçalo Ascensão ç Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012 CEN & CENELEC systems Links to legislation
More informationTechnical standards to support the evolution of technology enabled care services
Technical standards to support the evolution of technology enabled care services Agenda Technical Special Interest Group Signalling across next generation networks and liaison with Ofcom/NICC Technical
More informationCYS & NEN Integrated Hydrocarbons Training Programme CYS and the Hydrocarbon Sector in Cyprus
CYS & NEN Integrated Hydrocarbons Training Programme CYS and the Hydrocarbon Sector in Cyprus December 8 th, 2015 CLEOPATRA HOTEL Nicosia Cyprus Prepared by Michalis Zantis (CYS) Purpose of this Workshop
More informationCross-domain applications (Northbound) CEN-CENELEC ICT Standardization activities
Cross-domain applications (Northbound) CEN-CENELEC ICT Standardization activities IoT for Smart Cities and Communities Bilbao (2018-06-06) CEN and CENELEC 1 Who we are & Where do we fit in International
More informationBUSINESS PLAN CEN/TC 191 FIXED FIREFIGHTING SYSTEMS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 191 FIXED FIREFIGHTING SYSTEMS CEN/TC 191 Business Plan Date: 2005-09-07 Version: 2 Approved BP Page: 1 EXECUTIVE SUMMARY Business Environment TC191 is responsible for standardization
More informationCEN strategies and plans for a global acceptance of the Eurocodes
CEN strategies and plans for a global acceptance of the Eurocodes Gonçalo Ascensão 5th December 2013 Adoption of the Eurocodes in the Balkan Region European Standardization System Links to legislation
More informationBUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY Business Environment Standardization of welding by all processes, as well as allied processes; these standards include terminology,
More informationBUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY Scope CEN/TC 250 covers the standardization of structural and geotechnical design rules for building and civil engineering works
More informationConfused by standards Standards for social alarms
Confused by standards Standards for social alarms Chris Dodd Strategic Development Director Chair of the BSI Technical Committee for Social Alarms Convenor (Chair) of the CENELEC technical committee for
More informationBUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION CEN/TC 305 Business Plan Page: 1 Business environment, benefits and priorities EXECUTIVE SUMMARY CEN/TC 305
More informationSecurity Standardisation - Mandate M/487 Jolien van Zetten
Security Standardisation - Mandate M/487 Jolien van Zetten Agenda Standardisation What is it? How does it work? Mandate M/487 to develop security standards Overview Results - CBRNE Relation standardisation
More informationBUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY The main fields CEN/TC 143 deals with safety of metal cutting machine tools, metal forming machine tools, electro-discharge machines
More informationBUSINESS PLAN CEN/TC 249 PLASTICS
Page: 1 BUSINESS PLAN CEN/TC 249 PLASTICS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal, societal and/or
More informationThe European Standardization System. Diana Dus Programme Manager International Cooperation
The European Standardization System Diana Dus Programme Manager International Cooperation The European Standardization Organizations (ESOs) CEN... (European Committee for Standardization) CENELEC... (European
More informationBUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY Business environment Products Personal fall arresting systems and components Personal equipment
More informationCEN and CENELEC Organisational description & functions International and regional activities
CEN and CENELEC Organisational description & functions International and regional activities Eric Marchand Programme Manager International Cooperation, CEN-CENELEC Management centre Overview CEN and CENELEC
More informationA Notification under Article 12 of Regulation (EU) No 1025/2012 1
EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Sustainable Growth and EU 2020 Standards for Boosting Competitiveness Brussels, 02/07/2014 A Notification under Article 12 of Regulation
More informationBUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES Business Environment EXECUTIVE SUMMARY The market scenario is the domestic one and product typology concerned is very wide. The products within the
More informationEU Standardization & EU Service Standardization
EU Standardization & EU Service Standardization Dr. Betty Xu Seconded European Standardization Expert in China (SESEC) 7 th Sept 2015 EU Standardization & EU Service Standardization Content Table 1. SESEC
More informationBUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY Business Environment The area of responsibility of CEN-CLC/TC 3 Quality management
More informationBSI the UK voice into European and national standards
BSI the UK voice into European and national standards Jessy Mathew Programme Manager Sustainability Sector BSI Copyright 2018 BSI. All rights reserved 1 Contents What are standards? About BSI Standards
More informationEUnetHTA The European network for Health Technology Assessment
EUnetHTA The European network for Health Technology Assessment EUnetHTA Training Course for Stakeholders Rome, 29 Oct 2014 Marianne Klemp, Research Director, NOKC, Norway Historical Timeline of EUnetHTA
More informationBUSINESS PLAN CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 162 Business Plan Page: 1 CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY Business Environment CEN/TC 162 is preparing standards
More informationBUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY Pumps are widely used in industry and facilities applications at a worldwide level. European pumps production represents a prime part of of the
More informationBUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY Business Environment Europe represents about 20% of vehicles of the world market. However the automotive industry is acting globally, the
More informationBUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY
CEN/TC 79 Business Plan Page: 1 BUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY Scope To prepare European Standards for respiratory protective devices (RPD) for work and rescue
More informationBUSINESS PLAN. CEN/TC 336 BITUMINOUS BINDERS Version 2018 EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 336 BITUMINOUS BINDERS Version 2018 EXECUTIVE SUMMARY BUSINESS ENVIRONMENT The parties interested in the bituminous binder market are the following industries: - the bituminous
More informationBUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY Business Environment Europe represents approximately 28,6 % of the world market. The parties involved are: - manufacturers of industrial
More informationBUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY
Page: 1 Business environment BUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY The 5 standards published by CEN/TC 208 since 1996 are used throughout the
More informationBUSINESS PLAN CEN/TC 142 WOODWORKING MACHINES SAFETY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 142 WOODWORKING MACHINES SAFETY EXECUTIVE SUMMARY Business environment largest in the world, covering more than 50% of the world market. CEN TC 142 activity deals with standardization
More informationStandardization in the Construction Sector Sustainability assessment and Environmental Product Declarations
Standardization in the Construction Sector Sustainability assessment and Environmental Product Declarations Gonçalo Ascensão 16 October 2014 ECO Platform EPD European Standardization Organizations (ESOs)
More informationEuropean Standards: Supporting the European Single Market for Services
2015 ANSI Conference: Standards and the Service Economy European Standards: Supporting the European Single Market for Services Presented by Ashok Ganesh Director Innovation, CEN and CENELEC September 29,
More informationBUSINESS PLAN CEN/TC 239 RESCUE SYSTEMS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 239 RESCUE SYSTEMS EXECUTIVE SUMMARY Business Environment CEN/TC 239 is engaged in the standardization of ambulances as emergency medical vehicles and/or crafts and their associated
More informationSýnishorn Maintenance - Qualification of maintenance personnel
ÍST EN 15628:2014 Gildistaka 20.11.2014 ICS: 3.08 Maintenance - Qualification of maintenance personnel Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16705 April 2014 ICS 13.310 English Version Perimeter protection - Performance classification methodology Protection périmétrique - Méthode
More informationConstruction Standards a driver for innovation and industry. 03 June 2015 Ashok Ganesh, CEN CENELEC
Construction Standards a driver for innovation and industry 03 June 2015 Ashok Ganesh, CEN CENELEC CEN and CENELEC CEN and CENELEC 2015-2 CEN & CENELEC Our mission: to fulfil the needs of industry leading
More informationInteroperability from the perspective of standards
Interoperability from the perspective of standards Alina IATAN CEN and CENELEC General considerations about European Standrads CEN and CENELEC 2018 2 Facts and figures about CEN and CENELEC 465 CEN/CLC
More informationEUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE
TC62/SEC1015/INF October 2009 EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE SOFTWARE AND MEDICAL DEVICES WORKING
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16629 July 2014 ICS 91.140.99 English Version Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standards
More informationBUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS Scope EXECUTIVE SUMMARY Safety and control devices for equipment burning gaseous or
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 18750 May 2015 ICS 35.240.60; 03.220.20 English Version Intelligent transport systems - Cooperative systems - Definition
More informationOpportunities in the DG JRC Enlargement and Integration Action
Opportunities in the DG JRC Enlargement and Integration Action Dr. Ole-Peter Ostermann, DG JRC, Enlargement and Associated Initiatives The Use of the Eurocodes in the Mediterranean Countries Varese 27
More informationISO/IEC and CEN standardization activities + buildingsmart
ISO/IEC and CEN standardization activities + buildingsmart ICIS DA, Cologne, June 2018 Gunnar Friborg, Molio, June 20 th 2018 1 Agenda Organization and collaboration within BIM standardization and development
More informationOn , CCMC received a proposal from DIN for the creation of a new Technical Committee in the area of Food Authenticity (see Annex 1).
BT N 11281 Draft BT C143/2018 TECHNICAL BOARD CEN/BT by correspondence For vote Issue date: 2018-08-22 According to IR2 Clause 6.1.4 Deadline: 2018-11-20 SUBJECT Establishment of a new TC on Food authenticity
More informationPaper and board - Determination of grammage (ISO 536:2012)
Irish Standard I.S. EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard
More informationBusiness Plan CEN/TC 172 PULP, PAPER AND BOARD
Page: 1 Business Plan CEN/TC 172 PULP, PAPER AND BOARD Introduction CEN Technical Committees and Business Planning The extension of formal business planning to CEN Technical Committees (CEN/TCs) is an
More informationEnglish Version. This Technical Report was approved by CEN on 11 December It has been drawn up by the Technical Committee CEN/TC 135.
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 17052 January 2017 ICS 91.080.10 English Version Guidelines on implementing EN 1090-1:2009+A1:2011, Execution of steel structures and aluminium
More informationBUSINESS PLAN CEN/TC 72 FIRE DETECTION AND FIRE ALARM SYSTEMS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 72 FIRE DETECTION AND FIRE ALARM SYSTEMS CEN/TC 72 Business Plan Page: 1 EXECUTIVE SUMMARY Scope To prepare standards, harmonised where necessary, to meet the essential requirements
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 12570 First edition 2000-03-15 Hygrothermal performance of building materials and products Determination of moisture content by drying at elevated temperature Performance hygrothermique
More informationECOS Position Paper: Further recommendations
Consultation Forum according to Art. 23 of Regulation (EU) No 517/2014 on fluorinated greenhouse gases: Barriers to the uptake of low-gwp alternatives to HFCs related to standards, codes and legislation
More informationHexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
Irish Standard I.S. EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:
More informationCEN/TR :2017. Framework for standardization of signatures - Extended structure including electronic identification and authentication
Framework for standardization of signatures - Extended structure including electronic identification and authentication Valid from 06-06-2017 ICS: 35.030, 35.240.30 Bureau for Standarisation Rue Joseph
More informationBUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS CEN/TC 10 Business Plan Page: 1 EXECUTIVE SUMMARY Lifts, escalators, moving walks and building hoists are essential elements in providing safe
More informationGLOBAL GLOBAL OUTREACH OUTREACH REPORT 2016 REPORT Q4 2017
GLOBAL GLOBAL OUTREACH OUTREACH REPORT 2016 REPORT Q4 2017 Contents 1. Foreword... 1 2. Alignment of European and ISO/IEC deliverables... 2 2.1. Level of alignment between CEN and ISO deliverables... 2
More informationEUROPEAN REGIONAL DEVELOPMENT FUND INTERREG EUROPE. Draft Cooperation Programme Tako Popma, 5 february INTERREG EUROPE PROGRAMME
EUROPEAN REGIONAL DEVELOPMENT FUND INTERREG EUROPE Draft Cooperation Programme 2014 2020 Tako Popma, 5 february 2014 1 INTERREG EUROPE PROGRAMME CONTENTS Regulatory and policy context Programme Strategy
More informationResource efficiency and Circular Economy in the EU and Japan Overview of the EU Ecodesign and Energy Labelling schemes. Tokyo, 15 February 2016
Resource efficiency and Circular Economy in the EU and Japan Overview of the EU Ecodesign and Energy Labelling schemes Tokyo, 15 February 2016 Policy context Europe 2020 Strategy: objectives on employment,
More informationEuropean Standardization for the Natural Gas Infrastructure
European Standardization for the Natural Gas Infrastructure The benefits of participation Arie Krijgsman Gasunie The Netherlands Madrid - 18th and 19th June 2009 Content The standards framework Benefits
More informationISO 2411 INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of coating adhesion
INTERNATIONAL STANDARD ISO 2411 Third edition 2000-06-01 Rubber- or plastics-coated fabrics Determination of coating adhesion Supports textiles revêtus de caoutchouc ou de plastique Détermination de l
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15316-6-7 April 2017 ICS 27.160; 91.120.10; 91.140.10 English Version Energy performance of buildings - Method for calculation of system energy
More informationBUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY Business Environment Nearly almost 100% of the 450 M European people are supplied with drinking water (DW) Europe represents approximately
More informationNational Research Infrastructure Roadmapping in Europe
www.inroad.eu info@inroad.eu @InRoadproject @InRoad_Project National Research Infrastructure Roadmapping in Europe Drivers and Trends InRoad Isabel Bolliger University of Lausanne Swiss Graduate Institute
More informationCEN/TC 442 Decisions taken /16
CEN/TC 442 Building Information Modelling (BIM) CEN/TC 442 Decisions taken 2016-02-15/16 Date: 2016-02-16 Secretariat Reference: CEN/TC 442 N065 SN (Norway) Lisbet Landfald e-mail: lla@standard.no Direct
More informationBUSINESS PLAN CEN/TC 135 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 135 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES EXECUTIVE SUMMARY The business environment relevant for the work of the CEN/TC includes - The entire industry involved
More informationBUSINESS PLAN CEN/TC 132 ALUMINUM AND ALUMINIUM ALLOYS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 132 ALUMINUM AND ALUMINIUM ALLOYS EXECUTIVE SUMMARY 1. BUSINESS ENVIRONMENT OF THE CEN/TC 132 It may be hard to believe but only 150 years ago aluminium was considered to be
More informationSýnishorn Specifications for patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment
ÍST EN 1865-1:2010+A1:2015 Gildistaka 15.11.2015 ICS: 11.16 Forskriftir fyrir sjúkraflutningabúnað til nota í sjúkrabifreiðum - Hluti 1: Almenn sjúkrabörukerfi og sjúkraflutningabúnaður Specifications
More informationReport on the activities of the ATEX consultant. Xavier Lefebvre. Contract : CENELEC/NA Consultant/2013-1
Report on the activities of the ATEX consultant Xavier Lefebvre Contract : CENELEC/NA Consultant/2013-1 Period covered: from 1 January 2013 to 1 July 2013 1. Attended meetings Date Subject Location 2013.01.28
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 13445-102 May 2015 ICS 23.020.30 English Version Unfired pressure vessels - Part 102: Example of application of vertical vessel with bracket
More informationContents. EN :2012 (E) Issue 5 ( ) Page
Contents Page Foreword... 4 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 7 4 Symbols and abbreviations... 7 5 Determination of inspection and testing requirements... 8 5.1 General...
More information1 BUSINESS ENVIRONMENT OF THE CEN/TC
Page 2 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal, societal and/or international dynamics describe
More informationFounding - Magnetic particle testing
Irish Standard Founding - Magnetic particle testing CEN 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus
More informationBUSINESS PLAN. CEN/TC 444 Test methods for environmental characterization of solid matrices
Page: 1 BUSINESS PLAN CEN/TC 444 Test methods for environmental characterization of solid matrices EXECUTIVE SUMMARY Scope Standardization of test methods for the environmental characterization of soil,
More informationILNAS-EN ISO 23640:2015
In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) In-vitro-Diagnostika - Haltbarkeitsprüfung von Reagenzien für invitro-diagnostische Untersuchungen
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CLC/TR 50670 December 2016 ICS 13.220.50; 27.160; 91.060.20 English Version External fire exposure to roofs in combination with photovoltaic (PV)
More informationILNAS-EN ISO :2017
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle (ISO 9606-1:2012, einschließlich
More informationQuality management systems - Fundamentals and vocabulary (ISO 9000:2015)
Irish Standard I.S. EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) CEN 2015 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:
More informationISO INTERNATIONAL STANDARD. Packaging Tactile warnings of danger Requirements. Emballages Indications tactiles de danger Exigences
INTERNATIONAL STANDARD ISO 11683 Second edition 1997-10-01 Corrected and reprinted 1998-09-01 Packaging Tactile warnings of danger Requirements Emballages Indications tactiles de danger Exigences A Reference
More informationISO 505 INTERNATIONAL STANDARD. Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts
INTERNATIONAL STANDARD ISO 505 Second edition 1999-11-15 Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts Courroies transporteuses Méthode de détermination
More informationBUSINESS PLAN CEN/TC 149 POWER-OPERATED WAREHOUSE EQUIPMENT EXECUTIVE SUMMARY
Pages: 1 BUSINESS PLAN CEN/TC 149 POWER-OPERATED WAREHOUSE EQUIPMENT EXECUTIVE SUMMARY The whole industry from raw materials through the production process to the customer needs material handling technology.
More informationEress Forum 2018 Workshop 2: The Future of Energy Metering Data. Data security basics
Eress Forum 2018 Workshop 2: The Future of Energy Metering Data Data security basics Standardisation Regulation IEC TC65 IEC 62443-x-x is a horizontal standard Railway Perspective - Overview related committees
More informationISO INTERNATIONAL STANDARD. Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed
INTERNATIONAL STANDARD ISO 14744-4 First edition 2000-04-15 Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed Soudage Essais de réception des machines
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16677 May 2014 ICS 11.040.70 English Version Ophthalmic optics - Reference method for the testing of spectacle frames and
More informationNational foreword. Compliance with a British Standard cannot confer immunity from legal obligations.
BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 15500-1:2017. It supersedes BS EN 15500:2008, which is withdrawn. The UK participation in its preparation was entrusted
More informationPERSPECTIVEÎNSECURITATEAPRIVATĂ-VALOAREASOCIALĂA SERVICILORDESECURITATE PERSPECTIVESINPRIVATESECURITY SOCIALVALUEOF SECURITYSERVICES
PERSPECTIVEÎNSECURITATEAPRIVATĂ-VALOAREASOCIALĂA SERVICILORDESECURITATE PERSPECTIVESINPRIVATESECURITY SOCIALVALUEOF SECURITYSERVICES PARTENERIEVENIMENT/EVENTPARTNERS A strong and globally competitive market
More informationBUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS
Page:1 BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal,
More informationSludge, treated biowaste and soil Digestion of nitric acid soluble fractions of elements
ÖNORM EN 16173 Edition: 2012-10-01 Sludge, treated biowaste and soil Digestion of nitric acid soluble fractions of elements Schlamm, behandelter Bioabfall und Boden Aufschluss von mit Salpetersäure löslichen
More informationBUSINESS PLAN CEN/TC 189 GEOSYNTHETICS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 189 GEOSYNTHETICS EXECUTIVE SUMMARY The term Geosynthetics includes the product categories of (1) geotextiles and geotextile related products and (2) geosynthetic barriers,
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1555-7 January 2013 ICS 23.040.01; 91.140.40 Supersedes CEN/TS 1555-7:2003 English Version Plastics piping systems for the
More informationINTERNATIONAL COOPERATION IN STANDARDIZATION
EU-Russia cooperation on standardisation for construction Moscow, 9-10 October 2008 1 EU-Russia cooperation on standardization for construction INTERNATIONAL COOPERATION IN STANDARDIZATION Amilcar da Costa
More informationISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements
INTERNATIONAL STANDARD ISO 14847 First edition 1999-04-01 Rotary positive displacement pumps Technical requirements Pompes volumétriques à mouvement rotatif Prescriptions techniques A Reference number
More informationPetroleum, petrochemical and natural gas industries - Hairpin-type heat exchangers (ISO 12212:2012)
Irish Standard I.S. EN ISO 12212:2012 Petroleum, petrochemical and natural gas industries - Hairpin-type heat exchangers (ISO 12212:2012) NSAI 2012 No copying without NSAI permission except as permitted
More informationISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives
INTERNATIONAL STANDARD ISO 15908 First edition 2002-12-01 Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives Adhésifs pour réseaux de tuyauteries
More informationThe standards of the European gas infrastructure. Main functional standards for maximum operating pressure over 16 bar
The standards of the European gas infrastructure. Main functional standards for maximum operating pressure over 16 bar Petrenko V.E., D. Eng. Sc. Development of Standardisation Technical Committees in
More informationNational foreword. Text affected
PUBLISHED DOCUMENT National foreword This Published Document is the UK implementation of CEN/TR 16946-2:2016. The UK participation in its preparation was entrusted to Technical Committee RHE/16, requirements
More informationGas meters - Additional functionalities
Irish Standard Gas meters - Additional functionalities CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus
More informationILNAS-EN 62560:2012/A1:2015
ILNAS-EN 62560:2012/A1:2015 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications Lampes à LED autoballastées pour l'éclairage général fonctionnant à des tensions
More information