UNIVERSITY OF ROCHESTER DESIGN STANDARDS FEBRUARY 2005MARCH 2007

Size: px
Start display at page:

Download "UNIVERSITY OF ROCHESTER DESIGN STANDARDS FEBRUARY 2005MARCH 2007"

Transcription

1 SECTION DOOR HARDWARE 1.1 SUMMARY A. Door hardware required for swinging doors. No pocket or folding doors permitted at U of R. 1.2 SUBMITTALS A. Hardware Schedule: To be coordinated with doors, frames and related work to ensure proper size, thickness, hand, function and finish of door hardware. B. Product Data: Manufacturers technical product data for each type of door hardware, installation instructions, maintenance of operating parts and finish, and other information necessary to show compliance with requirements. 1.3 QUALITY ASSURANCE A. Standard: ANSI/BHMA. B. Provide door hardware for fire rated openings that complies with NFPA 80 and requirements of authorities having jurisdiction. Provide only items that are listed and are identical to products tested by UL for types and sizes of doors required and complies with requirements of door and frame labels. 1.4 SPECIAL REQUIREMENTS A. All hardware to be through bolted (door closers, panic devices, push/pulls, etc.). B. Salvaged hardware including cylinders turned over to Facilities Operations. C. All out swinging doors to have pin hinges. 1.5 PACKING AND SHIPPING A. Tag each item or package with door number it pertains to. 1.6 FINISHES 1. Satin Bronze US10 (ANSI/BHMA 612) for general hardware on River Campus, however some buildings will be US26D or US Brushed Chrome US26D (ANSI/BHMA 626) for toilet, kitchen and service areas on River Campus. 3. Brushed Chrome US26D (ANSI/BHMA 626) for all applications at Medical Center. 4. Prime finish hinges at all exterior doors unless noted otherwise. 2.1 PRODUCTS A. Product designation and the name of one manufacturer are listed for purpose of establishing minimum requirements. Provide either specified product or equal product of one of other acceptable manufacturers listed. Products of other manufacturers are not permitted, unless specified otherwise. Section Door Hardware Page 1 of 5

2 B. Hinges 1. Approved manufacturers: Hager, Stanley, Lawrence, McKinney. 2. Hager: a. BB ½ x 4 ½ at interior doors up to and including 3-4 wide b. BB x 4 ½ at interior doors over 3-4 wide. c. BB1260 swing clear hinges at all cross-corridor and storage area applications where frame detail permits. d. BB1168 hinges to be provided where heavy weight hinges are to be provided (two pair per leaf). e. BB1256 spring hinges. (Not to be used on fire rated door assemblies.) C. Pivots 1. Approved Manufacturer: Rixson D. Locks, locksets, latch sets and dead bolts 1. Approved Manufacturers: a. Medical Center: Corbin/Russwin ML 2000 series LWA trim, ML2000 Series LWA 626 style handle, LC (NO SUBSTITUTION). b. River Campus and Residence Halls: Corbin/Russwin ML2000 series LWA trim (or match existing lever trim) (NO SUBSTITUTION). c. Off Campus Properties: Corbin/Russwin, or Schlage to match existing in building. d. All partition doors (furniture systems), non-mortised applications: cylindrical locks Corbin/ Russwin CL3600 NZD- 626 (NO SUBSTITUTION). e. Gates and fencing: compatible with UR key system. 2. Special Requirements: a. All locksets provided with curved lip strike. b. All strikes to be provided with wrought strike box. c. Lock Cylinders and Keys: furnished by General Contractor and installed by Facilities Operations. Contact Facilities Operations for spec. Cylinder zero bited and 4 blanks to be provided. Cylinders installed by Facilities Operations. d. Construction cylinders and keys provided by Facilities Operations. e. No locks/cylinders to be installed by contractor that are outside UR key system. f. Door locksets are to be prepared by the General Contractor to receive lock/cylinders. E. Key control system 1. Key biting and master keying schedule to be determined by Facilities Operations. F. Exit (panic) devices 1. With approval by MC Lockshop supervisor provide Approved Manufacturers and Model at Medical Center: Von Duprin 99/98 series, Precision, Corbin/Russwin. 2. Approved Manufacturer and Model at River Campus: Von Duprin 33, 99, seriesand Impact Devices, are acceptable where appropriate. (NO SUBSTITUTES). 3. Applications: a. Fire rated cross-corridor HM double doors: Surface vertical rod less bottom rod, include fire bolt. b. All other double doors at Medical Center: Concealed vertical rods where possible, if not, surface vertical rods less bottom rod and with fire bolt are permissible. Where security is an issue, concealed top and bottom rods are required. c. All other double doors at River Campus: Surface vertical rod. d. Single doors: rim or mortise. 4. Trim: Stile of lever handle to match those of locksets. G. Closers 1. Approved Manufacturer and Model for Medical Center a. LCN 4011 / Section Door Hardware Page 2 of 5

3 b. Norton Approved Manufacturer and Model for River Campus a. LCN 4011 / b. (LCN ONLY NO SUBSTITUTES). H. Power Operators 1. Approved Manufacturer: Horton Power Operators Model to be reviewed and approved by MC & RC Lockshop Supervisor. I. Push/Pull Units. For SMH patient rooms. 1. Approved Manufacturers: Glynn Johnson. J. Push and Pull Plates 1. Approved Manufacturers: Hager, Rockwood, Ives Hager: a. 30S 4 x 16 push plates. b. 33G 4 x 16 pull plates. K. Flush bolts 1. Approved Manufacturers: Hager, Rockwood, Ives, Glynn Johnson. Note: provide dust proof strikes at applications with automatic and constant latch flush bolts. Hager: a. 282D b. 291D c. 292D d. 293D e. 294D L. Coordinators 1. Approved Manufacturers: Ives 900 series, Rockwood, Glynn Johnson. Note: Brackets are to be provided for applications used in conjunction with parallel arm mount closers. M. Floor and wall stops. Floor mounted stops approved by exception at Medical Center. 1. Wall Stops: Hager 236W, Rockwood, Ives, Glynn Johnson. 2. Note: contractor to provide backing in wall for wall stops. N. Kick plates: Stainless steel, Brass, Bronze 1. Hager 190S x 8 high, Rockwood, Ives, Glynn Johnson. O. Acrovin Kick plates at Medical Center: Dove Gray x 8 high. P. Bypassing sliding door equipment. Heavy duty. Q. No bifold door or accordion doors. R. Weather-stripping for exterior doors 1. Acceptable Manufacturers: Pemko, Hager, National Guard Pemko: a. 303APK weather-stripping. b. 315CN sweep strips. S. Sound stripping for interior doors 1. Acceptable Manufacturers: Pemko 350CPK, National Guard, Reese, Zero. T. Automatic door bottoms (door sweeps). 1. Acceptable Manufacturers: Pemko 4301CPKL, National Guard, Reese, Zero. Section Door Hardware Page 3 of 5

4 U. Thresholds. Set in full bed of sealant and anchored per detail/spec (provide). V. Key Removable Mullions 1. Approved Manufacturer: Von Duprin, Precision. W. Punch locks. ILCO Unican 8100 series mortise lock for Medical Center. 2.2 ACCESS CONTROL DOOR TYPES AND HARDWARE A. Install only if done with card reader and electronic hardware. Do not install hardware only for future reader. B. Door Types 1. Access control may be installed on most door types, but must follow the design specifications per drawings. Single, double (with or without center mullion), single doors with an inactive leaf must include some means of securing and/or monitoring the inactive leaf. Electric strikes are to be installed per design with a monitoring contact included as an integral part of the strike assembly (unless otherwise specified). See door strike specifications below. Magnetic locks may be used on doors where an electric strike is not applicable. Any door installed with a magnetic lock must be wired to the appropriate area fire alarm system to release the magnetic lock upon a fire alarm unless otherwise specified. C. Lock Set Types 1. Single door hardware is to include a storeroom lock set. The storeroom set provides: a. Latch bolt by grip inside or by key outside. b. Outside grip always rigid. c. Inside grip always free. D. Electric Door Strikes 1. See specifications for 12 volt DC and 24-volt DC electric door strikes below. E. Magnetic Locks 1. Magnetic locks shall be dual voltage coils 12/24 vdc, fail safe and meet ANSI/BHMA A or latest classification criteria including a minimum holding force of 1000 LBS. Locks used on labeled fire door assemblies shall be listed or labeled by a nationally recognized independent testing laboratory. Magnetic locks shall include a built in, concealed SPDT door status monitor switch to indicate door status at a remote location. Magnetic locks are to be used as specified, typically on double doors or application specific. Fire alarm interface must be connected per all code requirements. F. Electrified Lock Set Option 1. Corbin/Russwin electrified lockset. G. Request To Exit Sensors (REX) 1. A request to exit motion sensor is to be installed on the secure side of a card reader door unless otherwise specified. The motion sensor is to be located above the door, on the wall or at the ceiling to provide for coverage at the door. The motion sensor is used to provide a signal, masking a forced door condition when exiting the area. Section Door Hardware Page 4 of 5

5 H. ADA Requirements 1. The card reader may be mounted such that the highest operable part is 54 AFF if the device can be reached by someone in a wheelchair with a side approach (i.e. parallel to the wall with no obstructions). If the device is located in a nook or above a counter and a wheelchair can only approach head on (i.e. feet toward the wall) then the device cannot be mounted any higher than 48 AFF. In most cases, especially in corridors, a side approach is available and 54 is allowed. These rules are explained in and of the ADA regulations. 2. The access control system must be able to interface with a push pad control for handicap access where applicable. Automatic doors may be integrated with the access control system but must include all existing safeties without modification of function. Any automatic door(s) that use pushpads must be hard-wired to the door operator -not battery operated. I. Automatic Door Operators 1. Any new automatic door operators being installed shall conform to all applicable NFPA codes which include the operator de-activating during a fire alarm while providing a latched door condition and allowing free egress from the secured space. Any automatic door(s) that use push-pads must be hard-wired to the operator - not battery operated. J. Access Control System Door Components 1. Electric Strike Specifications: a. 12/24 VDC operating voltage. b. Continuous duty rated solenoid. c. Fail secure. d. Integral strike with monitoring or infrared monitoring. 2. Suggested Manufacturers: a. Folger Adams 600 series - Fail Secure12/24/VDC-with Monitoring contact, Continuous Duty, 3-hour fire rating-ul10b. b. VonDuprin series Type A or C- Fail Secure 12/24/VDC-with Monitoring contact, Continuous Duty, 3 hour fire rating-ul10b. c. H.E.S series- Fail Secure 12/24/VDC-with ILM (Infrared Latch bolt Monitor), Continuous Duty, 3-hour fire rating-ul10b. K. Electromagnetic locks Specifications 1. 12/24VDC Fail Safe- must meet ANSI/BHMA A or latest classification. Minimum holding force Lb. holding force. 2. Device must include monitoring contact or equivalent means. 3. Suggested Manufacturers: a. Locknetics - 310, 380, or 390 Series 12/24 VDC Fail Safe. b. DynaLock Corp Series, 12/24 VDC Fail Safe. 4. Note: Where application uses electromagnetic lock(s), an electric key switch override must be installed on reader side of door. a. Suggested Manufacturer - Locknetics 750 Series - Product DPDT Momentary. L. Electronic Panic Device Power Supply 1. Where electronic panic bars are specified, the UL power supply supporting the electronic crash bar(s) shall include a fire alarm interface and battery back-up capabilities. END OF SECTION Section Door Hardware Page 5 of 5

1. Items known commercially as finish hardware or builders hardware, required for swing, sliding, or folding doors.

1. Items known commercially as finish hardware or builders hardware, required for swing, sliding, or folding doors. PART 1 - GENERAL 1.1 SUMMARY: A. Section Includes: SECTION 08710 FINISH HARDWARE 1. Items known commercially as finish hardware or builders hardware, required for swing, sliding, or folding doors. 2. Types

More information

UBC Technical Guidelines Section Edition Door Hardware Page 1 of 7

UBC Technical Guidelines Section Edition Door Hardware Page 1 of 7 Page 1 of 7 1.0 GENERAL 1.1 Related UBC Guidelines.1 Division 26.2 Division 28.3 Section 08 00 10 Openings General Requirements.4 Section 28 05 00 Common Work Results for Electronic Safety and Security.5

More information

SECTION DOOR HARDWARE

SECTION DOOR HARDWARE PART 1 GENERAL 1.01 SECTION INCLUDES SECTION 08 7100 DOOR HARDWARE A. Hardware for wood, aluminum, and hollow metal doors. B. Hardware for fire-rated doors. C. Electrically operated and controlled hardware.

More information

University of Rochester October 17, 2008 Brooks Landing Business Center

University of Rochester October 17, 2008 Brooks Landing Business Center SECTION 087100 - DOOR HARDWARE PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Commercial door hardware. 2. Cylinders for doors specified in other Sections. 1.2 SUBMITTALS A. Product

More information

DIVISION 08 OPENINGS HARDWARE AND KEYING PART 1 - GENERAL 1.01 SUMMARY

DIVISION 08 OPENINGS HARDWARE AND KEYING PART 1 - GENERAL 1.01 SUMMARY 08 70 00 PART 1 - GENERAL 1.01 SUMMARY A. Section includes the design and coordination for all necessary hardware and coordination for all doors. Hardware shall include but not necessarily be limited to

More information

DIVISION 08 OPENINGS HARDWARE AND KEYING PART 1 - GENERAL 1.01 SUMMARY

DIVISION 08 OPENINGS HARDWARE AND KEYING PART 1 - GENERAL 1.01 SUMMARY 08 70 00 PART 1 - GENERAL 1.01 SUMMARY A. Section includes the design and coordination for all necessary hardware and coordination for all doors. Hardware shall include but not necessarily be limited to

More information

SECTION HARDWARE

SECTION HARDWARE SECTION 08 70 00 - HARDWARE Refer to each numbered building file (request from Project Manager) and the University's Facilities Management Lockshop. Hardware: 1. Locksets a. Locksets shall be provided

More information

DOOR HARDWARE SECTION DESIGN REQUIREMENTS GENERAL INFORMATION

DOOR HARDWARE SECTION DESIGN REQUIREMENTS GENERAL INFORMATION DOOR HARDWARE GENERAL INFORMATION 1.1 CU Morningside, Manhattanville, Nevis and Lamont Dougherty Campus have specific hardware requirements. Standardized door hardware, systems, and components are described

More information

SECTION DOOR HARDWARE

SECTION DOOR HARDWARE McClellan Blakemore Architects New Warehouse Facility for SECTION 08710 DOOR HARDWARE PART 1 GENERAL 1.01 SECTION INCLUDES A. Hardware for wood and hollow steel doors. B. Hardware for fire-rated doors.

More information

SECTION DOOR HARDWARE

SECTION DOOR HARDWARE PART 1 GENERAL 1.01 SUMMARY A. Section Includes SECTION 08 7100 DOOR HARDWARE The work in this section includes furnishing and installing all items of architectural hardware for aluminum, wood and hollow

More information

APPENDIX F: LOCKSETS AND ACCESS CONTROL

APPENDIX F: LOCKSETS AND ACCESS CONTROL APPENDIX F: LOCKSETS AND ACCESS CONTROL F.1 LOCKSETS The University, with the exception of the Housing Division which uses a Best 7-pin system, utilizes a Corbin Russwin 7-pin IC Core keying system. Locksets

More information

C. Thresholds, weatherstripping, seals and door gaskets. A. ANSI/ICC A117.1 Standard for Accessibility and Usable Buildings and Facilities; 1998

C. Thresholds, weatherstripping, seals and door gaskets. A. ANSI/ICC A117.1 Standard for Accessibility and Usable Buildings and Facilities; 1998 SECTION 08 71 00 - Page 1 PART 1 GENERAL 1.1 SECTION INCLUDES A. Hardware for steel doors. B. Electrified door hardware. C. Thresholds, weatherstripping, seals and door gaskets. 1.2 RELATED SECTIONS A.

More information

ONONDAGA COMMUNITY COLLEGE FERRANTE HALL RENOVATIONS - PHASE

ONONDAGA COMMUNITY COLLEGE FERRANTE HALL RENOVATIONS - PHASE SECTION 08 71 00 - DOOR HARDWARE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

2. Interior doors shall be not less than 18 gauge steel.

2. Interior doors shall be not less than 18 gauge steel. DIVISION 8 - DOORS AND WINDOWS 08100 METAL DOORS AND FRAMES 1. Exterior doors shall be not less than 16 gauge steel. The top channel of each metal door shall be solid without pockets which collect dirt

More information

Architect s Specification Guideline:

Architect s Specification Guideline: Architect s Specification Guideline: Hollow Metal Section 08 11 00 Wood Door Section 08 14 00 Aluminum Door/Frame Section 08 11 16 Door Hardware Section 08 71 00 The University of Texas at Dallas Richardson,

More information

DSC BUILDING 1200 ALTERATIONS OCTOBER 2011

DSC BUILDING 1200 ALTERATIONS OCTOBER 2011 SECTION 087100 - DOOR HARDWARE PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Commercial door hardware. 1.2 SUBMITTALS A. Product Data: For each type of product indicated. B. Other

More information

HALIFAX HUMANE SOCIETY ADDITIONS AND ALTERATIONS. B. See Division 08 door sections for astragals and door silencers.

HALIFAX HUMANE SOCIETY ADDITIONS AND ALTERATIONS. B. See Division 08 door sections for astragals and door silencers. SECTION 087100 - DOOR HARDWARE PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Commercial door hardware. 2. Cylinders for doors specified in other Sections. B. See Division 08 door

More information

B. Shop Drawings: Details of electrified door hardware, including wiring diagrams.

B. Shop Drawings: Details of electrified door hardware, including wiring diagrams. SECTION 087100 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Commercial door hardware for the following: a. Swinging doors. b. Other doors to the extent indicated. B. Related

More information

BuildingName The Description of the Project P DOCUMENTS

BuildingName The Description of the Project P DOCUMENTS ARCHITECTURE, ENGINEERING AND CONSTRUCTION P00000000 0000 DOCUMENTS ARCHITECTURE & ENGINEERING 326 East Hoover, Mail Stop B Ann Arbor, MI 48109-1002 Phone: 734-764-3414 Fax: 734-936-3334 SPECIFICATION

More information

Title Page Table of Contents Instruction to Bidders Form of Proposal Equal Opportunity Statement Form of Guarantee Supplemental General Conditions

Title Page Table of Contents Instruction to Bidders Form of Proposal Equal Opportunity Statement Form of Guarantee Supplemental General Conditions P00000000 0000 DOCUMENTS SPECIFICATION DIVISION 8 NUMBER SECTION DESCRIPTION DIVISION 08 DOOR AND WINDOWS SECTION 08710 - DOOR HARDWARE Title Page Table of Contents Instruction to Bidders Form of Proposal

More information

SECTION DOOR HARDWARE HSC Guide Specification for Capital Construction. [Adjust to Suit Project and Confirm with University Lock Shop]

SECTION DOOR HARDWARE HSC Guide Specification for Capital Construction. [Adjust to Suit Project and Confirm with University Lock Shop] SECTION 08 71 02 DOOR HARDWARE HSC Guide Specification for Capital Construction [Adjust to Suit Project and Confirm with University Lock Shop] PART 1 - GENERAL 1.1 GENERAL REQUIREMENTS A. Drawings and

More information

FINISH HARDWARE FOR ADDITIONS, RENOVATIONS, AND REMODELINGS. A. Provide finish hardware including necessary accessories.

FINISH HARDWARE FOR ADDITIONS, RENOVATIONS, AND REMODELINGS. A. Provide finish hardware including necessary accessories. SECTION 08711 FINISH HARDWARE FOR ADDITIONS, RENOVATIONS, AND REMODELINGS PART 1 GENERAL 1.01 SUMMARY A. Provide finish hardware including necessary accessories. B. Related Sections: 1. 06100 - Carpentry.

More information

Accessories. Desk Top Controls

Accessories. Desk Top Controls Accessories Desk Top Controls 15-2 15-1 15-3 15-2-3 DTMO-1 DTMA-1 Under Desk Top Mounting The SDC 15 series switch controls are mounted on the underside of a desk for remote door control. They may be connected

More information

Accessories DESK TOP CONTROLS MODELS SPECIFICATIONS MODELS SPECIFICATIONS UNDER DESK TOP MOUNTING MINI DESK TOP CONSOLE

Accessories DESK TOP CONTROLS MODELS SPECIFICATIONS MODELS SPECIFICATIONS UNDER DESK TOP MOUNTING MINI DESK TOP CONSOLE Accessories DESK TOP CONTROLS UNDER DESK TOP MOUNTING The SDC 15 Series Switch controls are mounted on the underside of a desk for remote door control. They may be connected to the REX input of an access

More information

SEQUOYAH SCHOOLS FI&R 06 G01 Cherokee Nation Tahlequah, Oklahoma

SEQUOYAH SCHOOLS FI&R 06 G01 Cherokee Nation Tahlequah, Oklahoma Eastern Oklahoma Tribal Schools Facilities Management Program Choctaw Nation of Oklahoma 601 North Kelly Avenue, Suite 105 Edmond, Oklahoma 73003 Voice: (405) 330 9236 Fax: (405) 330 9261 Serving the schools

More information

LOCK INTO THE ACSI ADVANTAGE LOCK INTO THE ACSI ADVANTAGE

LOCK INTO THE ACSI ADVANTAGE LOCK INTO THE ACSI ADVANTAGE LOCK INTO THE ACSI ADVANTAGE LOCK INTO THE ACSI ADVANTAGE MODIFICATIONS TO: ADAMS RITE ARROW CORBIN RUSSWIN DORMA DOROMATIC MONARCH PRECISION SARGENT VON DUPRIN YALE and more SERIES 1500 EXIT DEVICES CATALOG

More information

SECTION DOOR HARDWARE HSC Guide Specification for Capital Construction. [Adjust to Suit Project]

SECTION DOOR HARDWARE HSC Guide Specification for Capital Construction. [Adjust to Suit Project] SECTION 08 71 00 DOOR HARDWARE HSC Guide Specification for Capital Construction [Adjust to Suit Project] PART 4 - GENERAL 4.1 GENERAL REQUIREMENTS A. Drawings and general provisions of the Contract, including

More information

DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES

DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES SECTION 8710 DOOR HARDWARE PART 1DESIGN DIRECTIVES 1.1GENERAL A.The purpose of this section is to insure the continuing high standard of finish hardware for all Dartmouth buildings and to ensure system

More information

ABLOY EFEND. New name for security

ABLOY EFEND. New name for security ABLOY EFEND New name for security SET SECURITY TO NEXT LEVEL ABLOY is now available in ANSI door environment. OPTIONS FOR EVERY NEED Inclusive product range includes both electric and mechanical locking

More information

v.3.1: December 19, 2014

v.3.1: December 19, 2014 SECTION 08 71 00 DOOR HARDWARE PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Door hardware for aluminum, metal and wood doors. 2. Thresholds, weather-stripping, coordinators, astragals and door

More information

Accessories. Desk Controls. Break Glass Emergency Door Release SECURITY DOOR CONTROLS

Accessories. Desk Controls. Break Glass Emergency Door Release SECURITY DOOR CONTROLS Accessories Desk Controls 15-2 15-1 15-3 15-2-3 DTMO-1 DTMA-1 Under Desk Top Mounting 15-1 On-Off Push Switch 15-2 Momentary Push Switch 15-3 On-Off Toggle Switch 15-2-3 On-Off Toggle Switch and Momentary

More information

SECTION DOOR HARDWARE

SECTION DOOR HARDWARE SECTION 08 71 00 - DOOR HARDWARE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions, Division 1 - GENERAL REQUIREMENTS, and other applicable

More information

Lake County / Multi-Department Storage Facility / Project / December 05, 2016 SECTION DOOR HARDWARE

Lake County / Multi-Department Storage Facility / Project / December 05, 2016 SECTION DOOR HARDWARE PART 1 - GENERAL SECTION 087100 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to

More information

22-F fire exit rim device for all types of 4 x 8 (1219mm x 2438mm) single doors and 8 x 8 (2438mm

22-F fire exit rim device for all types of 4 x 8 (1219mm x 2438mm) single doors and 8 x 8 (2438mm 22 - Rim Device 22 rim device for all types of single and double doors with mullion, UL listed for accident hazard installations. Covers stock hollow metal doors with 161 cutouts. Fits door stiles as narrow

More information

SECTION FINISH HARDWARE

SECTION FINISH HARDWARE SECTION 08710 FINISH HARDWARE PART I GENERAL 1.01 SUMMARY A. SECTION INCLUDES 1. The work in this section includes furnishing all items of finish hardware as hereinafter specified or obviously necessary

More information

SECTION INTEGRATED DOOR ASSEMBLIES

SECTION INTEGRATED DOOR ASSEMBLIES SECTION 08 17 10 INTEG DOOR ASSEMBLIES SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Integrated

More information

System components portfolio overview. Power supplies, electromagnetic locks, electric strikes and system accessories

System components portfolio overview. Power supplies, electromagnetic locks, electric strikes and system accessories System components portfolio overview Power supplies, electromagnetic locks, electric strikes and system accessories Our comprehensive commercial portfolio includes everything you need to hang, protect,

More information

System Design and Overview Document

System Design and Overview Document System Design and Overview Document Power Calculations: This is one the most important tasks when designing your system. You must add up worst case current draw of your system. The power supply contained

More information

DOOR HARDWARE

DOOR HARDWARE SECTION 08 7100 DOOR HARDWARE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification Sections,

More information

2409/2900. Fire Guard

2409/2900. Fire Guard 2409/2900 Fire Guard Table of Contents Features and Additional Fire Opening Devices... 1 2409 Single-Point Hold Open Applications and Mounting Details... 2 2409 Track Assemblies, Arms and Components...

More information

THE LEDGE AT CABOT DRIVE. NASHVILLE, TN

THE LEDGE AT CABOT DRIVE. NASHVILLE, TN SECTION 087100 DOOR HARDWARE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,

More information

Job No. EGOS

Job No. EGOS SECTION 087100 DOOR HARDWARE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

2408/2900. Fire Guard

2408/2900. Fire Guard 2408/2900 Fire Guard Table of Contents Features and Additional Fire Opening Devices... 1 2408 Single-Point Hold Open Applications and Mounting Details... 2 2408 Track Assemblies, Arms and Components...

More information

DIVISION 28 ELECTRONIC SAFETY AND SECURITY

DIVISION 28 ELECTRONIC SAFETY AND SECURITY 281300 - ACCESS CONTROL A. General DIVISION 28 ELECTRONIC SAFETY AND SECURITY At the beginning of the project, schedule a meeting with the Facilities Access/Maintenance Coordinator with questions and concerns.

More information

Accessories. Desk Controls. Break Glass Emergency Door Release SECURITY DOOR CONTROLS

Accessories. Desk Controls. Break Glass Emergency Door Release SECURITY DOOR CONTROLS Accessories Desk Controls 15-2 15-1 15-3 15-2-3 DTMO-1 DTMA-1 Under Desk Top Mounting 15-1 On-Off Push Switch 15-2 Momentary Push Switch 15-3 On-Off Toggle Switch 15-2-3 On-Off Toggle Switch and Momentary

More information

PRODUCT INTRODUCTION

PRODUCT INTRODUCTION PRECISION HARDW ARE PRODUCT INTRODUCTION Distributed By DH Pace National Key Service Center 855-237-3667 BestSolutions@dhpace.com DHPace.com/BestSolutions INTRODUCTION INTRODUCTION Originally located in

More information

SECTION DOOR HARDWARE

SECTION DOOR HARDWARE SECTION 08710 DOOR HARDWARE Montgomery County Public Schools Facilities Guide DIVISION 8 DOORS AND WINDOWS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including

More information

POWER TRANSFERS ACCESSORIES EAC. Manufacturer Product Product No. Product Description Item No.

POWER TRANSFERS ACCESSORIES EAC. Manufacturer Product Product No. Product Description Item No. POWER TRANSFERS 47 Keedex Cord K-DLA K-DLB Keedex 18 Flexible Cord; Product No. K-DLA; 1/4 flexible conduit; use door loops when you need to transfer electrical current from the door frame to the door;

More information

ADDENDUM - 01 REGAN YOUNG ENGLAND BUTERA

ADDENDUM - 01 REGAN YOUNG ENGLAND BUTERA ADDENDUM - 01 REGAN YOUNG ENGLAND BUTERA REFERENDUMS ENGINEERING ARCHITECTURE DESIGN 456 HIGH ST. MT. HOLLY, NJ 08060 USA DATE:... Tuesday, 19 March 2019 FROM:...Angelo P. Butera, AIA VIA:... Facsimile

More information

New Bedford, Massachusetts Tel: (617) CBI Job No.: Fax: (617)

New Bedford, Massachusetts Tel: (617) CBI Job No.: Fax: (617) SECTION 08 71 00 PART 1 - GENERAL 1.01 GENERAL REQUIREMENTS A. Include the General Conditions, Modifications to the General Conditions, and applicable parts of Division 01 as part of this Section. B. Examine

More information

SECTION DOOR HARDWARE

SECTION DOOR HARDWARE SECTION 08710 DOOR HARDWARE Montgomery County Public Schools Facilities Guide DIVISION 8 DOORS AND WINDOWS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including

More information

EPlex 5000 Series MONACO LOCK COMPANY, INC. TEL (800) FAX (800)

EPlex 5000 Series MONACO LOCK COMPANY, INC. TEL (800) FAX (800) EPlex 5000 Series TEL (800) 526-6094 FAX (800) 845-5625 267 268 TEL (800) 526-6094 FAX (800) 845-5625 EPlex 2000 Series TEL (800) 526-6094 FAX (800) 845-5625 269 270 TEL (800) 526-6094 FAX (800) 845-5625

More information

Feb H: FINISH HARDWARE

Feb H: FINISH HARDWARE 2101 Commonwealth Blvd, Suite B Ann Arbor, MI 48105-5759 www.med.umich.edu/facilities/plan/ 087100-H: FINISH HARDWARE GENERAL In general, follow the guidelines below when designing and specifying finish

More information

Alarmed Exit Hardware

Alarmed Exit Hardware Copyright 2005, 2007, 2009-2016, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Contents 540/550 Series Exit Alarm...1 5100 Series Alarmed Exit Lock...2 5800 & 12-5800

More information

Behavioral Health Series

Behavioral Health Series ADAMS RITE AMERISTAR CECO DOOR CORBIN RUSSWIN CURRIES MAIMAN McKINNEY NORTON PEMKO ROCKWOOD RIXSON SARGENT All rights reserved by Veterans Health Portland VA Medical Center Portland, OR ADAMS RITE AMERISTAR

More information

Cylindrical Lever Lock

Cylindrical Lever Lock 6500 Cylindrical Lever Lock Copyright 2004-2009, 2011-2015, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Specifications 65G05 Shown KL Design Rose: K Wrought Lever:

More information

2408/2900. Fire Guard. SARGENT Manufacturing Company 2004, 2007 All rights reserved

2408/2900. Fire Guard. SARGENT Manufacturing Company 2004, 2007 All rights reserved Fire Guard SARGENT Manufacturing Company 2004, 2007 All rights reserved Fire Guard Table of Contents Features and Additional Fire Opening Devices............................1 2408 Single-Point Hold Open

More information

SECTION &.40 DOOR HARDWARE

SECTION &.40 DOOR HARDWARE SECTION 08 71 00.10 &.40 DOOR HARDWARE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

1. Commercial door hardware for the following: a. Swinging doors. b. Other doors to the extent indicated.

1. Commercial door hardware for the following: a. Swinging doors. b. Other doors to the extent indicated. SECTION 087100 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply

More information

April 2, 2019 ADDENDUM NO. 3 DEPARTMENT OF PUBLIC WORKS OPERATIONS BUILDING

April 2, 2019 ADDENDUM NO. 3 DEPARTMENT OF PUBLIC WORKS OPERATIONS BUILDING April 2, 2019 ADDENDUM NO. 3 DEPARTMENT OF PUBLIC WORKS OPERATIONS BUILDING Notice is hereby given that the following additional information and changes shall become part of the specifications of the above

More information

Glass Solutions Sweets Brochure

Glass Solutions Sweets Brochure Glass Solutions Sweets Brochure About ASSA ABLOY ASSA ABLOY is the global leader in door opening solutions, representing door and hardware brands. Our goal is to help facilities improve all aspects of

More information

RDM LOCK G Series Electromagnetic Lock. Listings. Standard Features. Ordering Information:

RDM LOCK G Series Electromagnetic Lock. Listings. Standard Features. Ordering Information: RDM LOCK G-1 1400 Series Electromagnetic Lock The patented 1400 Series Electromagnetic Lock is universal for all types of applications, including outdoor use. The innovative design will reduce installation

More information

DIVISION 10 SPECIALTIES

DIVISION 10 SPECIALTIES DIVISION 10 SPECIALTIES 11/11 SECTION 10 21 13.16 PLASTIC LAMINATE TOILET COMPARTMENTS PART 1 - GENERAL 1.01 SECTION INCLUDES Plastic laminate toilet compartments, urinal screens, head rail braced. 1.02

More information

SARGENT Beacon TM. A Technical and Informational Newsletter From Dugmore & Duncan. Summer 2009 Vol. VIII - Issue II L

SARGENT Beacon TM. A Technical and Informational Newsletter From Dugmore & Duncan. Summer 2009 Vol. VIII - Issue II L A Technical and Informational Newsletter From Dugmore & Duncan Summer 2009 Vol. VIII - Issue II L Safe Egress You Can See, Hear & Trust SARGENT Beacon TM SARGENT introduces Beacon, a next generation exit

More information

An ASSA ABLOY Group brand. 4800LN Series. Interconnected Locks

An ASSA ABLOY Group brand. 4800LN Series. Interconnected Locks An ASSA ABLOY Group brand 4800LN Series Interconnected Locks Page Revised Electronically 4/11 4800LN series interconnected lockset performance meets style introduction The Yale 4800LN series interconnected

More information

WVU DESIGN GUIDELINES & CONSTRUCTION STANDARDS DIVISION 28 ELECTRONIC SAFETY AND SECURITY

WVU DESIGN GUIDELINES & CONSTRUCTION STANDARDS DIVISION 28 ELECTRONIC SAFETY AND SECURITY SECTION 282500 ELECTRONIC CARD ACCESS CONTROL SYSTEM/SPECIFICATIONS PART 1 - GENERAL 1.1 Any deviances from the following instructions must be approved during design by WVU Facilities Management Personnel.

More information

COMBINED CONTRACT Nov. 10, NOTICE TO BIDDERS: Amend the Project Manual and Drawings to the above referenced project as follows: PROJECT MANUAL

COMBINED CONTRACT Nov. 10, NOTICE TO BIDDERS: Amend the Project Manual and Drawings to the above referenced project as follows: PROJECT MANUAL ADDENDUM NO. CC-1 STATE OF NEBRASKA 501 BUILDING RENOVATION DATA CENTER RENOVATION & BRASKA DLR GROUP PROJECT NO. 10-16206-00 Architecture Engineering Planning Interiors 6457 Frances Street, Suite 200

More information

SECTION DOOR HARDWARE

SECTION DOOR HARDWARE SECTION 08711 DOOR HARDWARE PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Commercial door hardware. 2. Cylinders for doors specified in other Sections. 3. Electrified door hardware.

More information

CL3800 Series. Standard-Duty Key-in-Lever Locksets

CL3800 Series. Standard-Duty Key-in-Lever Locksets Series Standard-Duty Key-in-Lever Locksets Applications Index Applications... 2 Features... 3 Functions... 4-6 Trim Designs... 7 An economical, Grade 2 standard-duty lever lockset which provides an outstanding

More information

5600 series. Low Energy Power Operator

5600 series. Low Energy Power Operator 5600 series Introduction The 5600 Series, a member of the POWERMATIC Family of Operators, offers functionality and control at an affordable price. Ideal for retrofit applications, the 5600 Series converts

More information

Series 98/99. All Series 98/99 are available with antimicrobial coating. (Page 38 for more detail) OPTIONS AND ACCESSORIES. Touchbar Exit Devices

Series 98/99. All Series 98/99 are available with antimicrobial coating. (Page 38 for more detail) OPTIONS AND ACCESSORIES. Touchbar Exit Devices Series 98/99 Touchbar Exit Devices 08 71 00/ING BuyLine 0724 STEELCRAFT STANDARD FEATURES 996L - Standard Breakaway Lever Trim The Breakaway Lever Trim Series 994L/996L significantly reduces damage from

More information

ED4000. Narrow Stile Pushpad Exit Devices

ED4000. Narrow Stile Pushpad Exit Devices Narrow Stile Pushpad Exit Devices Introduction Table of Contents Applications... 2 Applications and Listings... 3 Functions... 4 SecureBolt Features... 6 Rim Features... 8 Surface Vertical Rod Features...

More information

5900 SERIES Low Energy Power Operator

5900 SERIES Low Energy Power Operator Low Energy Power Operator introduction The Norton 5900 Series is a full-featured, extremely quiet, low energy door operator designed for moderate to high traffic doors. This cost-effective operator is

More information

CHECK NEW PRODUCTS SECTION FOR NEW INNOVATIVE SOLUTIONS

CHECK NEW PRODUCTS SECTION FOR NEW INNOVATIVE SOLUTIONS CHECK NEW PRODUCTS SECTION FOR NEW INNOVATIVE SOLUTIONS Table of Contents - Electronic Access & Releasing Devices Pushbutton Access Release Devices................ H1-H8 620/631 Series Heavy Duty Pushbuttons

More information

Door Closers. DURO/ Dark Bronze. Alum

Door Closers. DURO/ Dark Bronze. Alum Door Closers 300 Series Grade 1, Exceeds ANSI Standard 156.4 Universal application, non-handed for top jamb or parallel arm application, standard size # 4 hole pattern Multi size adjustable commercial

More information

Security & Life-Safety For Schools

Security & Life-Safety For Schools K-12 Solutions Security & Life-Safety For Schools Brought to you by ASSA ABLOY Group brands: ADAMS RITE BARON CECO DOOR CORBIN RUSSWIN CURRIES FRAMEWORKS GRAHAM HES MAIMAN MARKAR McKINNEY MEDECO NORTON

More information

Product Catalog. 8X Line Cylindrical Knob Locks

Product Catalog. 8X Line Cylindrical Knob Locks Product Catalog 8X Line Cylindrical Knob Locks XX Features and Benefits...3 Functions, Knob and Rose Design... 4 Latches and Strikes...5 Mechanical Options and Cylinder Options...6 How to Order, Finishes/Packaging

More information

Vanilla Box Design Criteria

Vanilla Box Design Criteria Description: 1. Floor: 2. Walls: 3. Ceiling: A. Finished and sealed 4 thick concrete slab on 10 mil poly vapor barrier on 4 of crushed stone throughout, including toilets. A. Interior gypsum board walls

More information

Security & Life-Safety For Schools

Security & Life-Safety For Schools K-12 Solutions Security & Life-Safety For Schools Brought to you by ASSA ABLOY Group brands: ADAMS RITE BARON CECO DOOR CORBIN RUSSWIN CURRIES FRAMEWORKS GRAHAM HES MAIMAN MARKAR McKINNEY MEDECO NORTON

More information

ED3000 Series. Crossbar Exit Devices

ED3000 Series. Crossbar Exit Devices Crossbar Exit Devices Introduction Table of Contents Applications and Listings... 3 Functions... 4 Rim Exit Features... 5 Surface Vertical Rod Exit Features... 7 Mortise Exit Features... 9 Trims and Functions...

More information

ACDx10xE5000 Access Controlled Doors

ACDx10xE5000 Access Controlled Doors ACDx10xE5000 Access Controlled Doors The ACDxE5000 EasyKit offers industry-proven life safety and security hardware for high-use, highabuse doors with a cost-effective access control solution. 10 Series

More information

About the Instructor & Presenter:

About the Instructor & Presenter: About the Instructor & Presenter: Paul G. Baillargeon, AHC, FDAI Vice President, Technical Consulting Door Security & Safety Foundation A noted veteran in the door and hardware industry, Mr. Baillargeon

More information

Card Access Control Specifications

Card Access Control Specifications 1.0 Qualifications Card Access Control Specifications 1.01 Vendors must be pre-qualified for card access on the SHSU campus. 2.0 General Requirements and Notes 2.00 SHSU requires that all exterior doors

More information

B. After installation, the Owner shall be able to perform hardware configuration changes as desired without the services of the Integrator.

B. After installation, the Owner shall be able to perform hardware configuration changes as desired without the services of the Integrator. SECTION 281300 - ACCESS CONTROL SYSTEM PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Minimum standards for Access Control Systems. B. Related Requirements: 1. Section 087100 Door Hardware. 1.2 REFERENCES

More information

Electromechanical Locks & Exit Devices

Electromechanical Locks & Exit Devices Electromechanical Locks & Exit Devices Overview ASSA ABLOY Group brands offer a myriad of electromechanical products that can be used in conjunction with access control systems. Based on our industry-leading

More information

ALARMED EXIT HARDWARE

ALARMED EXIT HARDWARE ALARMED EXIT HARDWARE Table of Contents 540/550 Series Exit Alarms.............................................1 5100 Series Alarmed Exit Lock..........................................2 5800 & 12-5800

More information

about HES is ISO 9001:2000 certified.

about HES is ISO 9001:2000 certified. about At Hanchett Entry Systems, Inc. (HES), we re committed to being the leading provider of electro-mechanical locking solutions and support. For more than 30 years, we ve been raising the standards

More information

AO19 SERIES LOW ENERGY AUTOMATIC DOOR OPERATORS

AO19 SERIES LOW ENERGY AUTOMATIC DOOR OPERATORS AO19 SERIES The AO19 Series Automatic Operator for single doors is an easy to install, heavy duty product for highuse and high abuse low energy applications. The AO19 Series meets requirements for ANSI/BHMA

More information

Table of Contents Auxiliary Locks

Table of Contents Auxiliary Locks Copyright 2007-2018, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company

More information

Demountable Office Fronts. A Sustainable Interior Design Solution

Demountable Office Fronts. A Sustainable Interior Design Solution Demountable Office Fronts A Sustainable Interior Design Solution Efficient, attractive and cost effective office solution Demountable frame designs by Frameworks provide building owners and tenants with

More information

Optional cable and connectors SELECTRIC TM PRO

Optional cable and connectors SELECTRIC TM PRO SDC Marks Best Sargent Arrow Corbin Russwin 7800 SELECTRICTM Locksets and Conversions SELECTRIC SELECTRIC TM PRO- Electrified Mortise Locksets TM Conversions - Mechanical Lock Electrification SELECTRIC

More information

Doorway Solutions for Multi-Resident Facilities. Apartments, Condominiums, Mixed Use & Assisted/Senior Living

Doorway Solutions for Multi-Resident Facilities. Apartments, Condominiums, Mixed Use & Assisted/Senior Living Doorway Solutions for Multi-Resident Facilities Apartments, Condominiums, Mixed Use & Assisted/Senior Living We Open the Door to Better Spaces While the doorways in every building are important, the ones

More information

SPECIFICATIONS: FIREGUARD CROSS CORRIDOR CC

SPECIFICATIONS: FIREGUARD CROSS CORRIDOR CC SPECIFICATIONS: FIREGUARD CROSS CORRIDOR CC SECTION 08 35 13.23 ACCORDION FOLDING FIRE DOORS PART 1 GENERAL 1.01 SUMMARY OF WORK A. Division 0 and 1, as indexed, apply to this section. B. Furnish and install

More information

CK4300 Series. Cylindrical Knob Locksets

CK4300 Series. Cylindrical Knob Locksets Series Cylindrical Knob Locksets Applications Table of Contents Applications... 2 Features... 3 Functions... 4 Trim Designs... 5 Options and Accessories... 6 How to Order... 8 Quick Codes... 9 How to Specify...

More information

5900 Series X-in Low Energy Power Operator

5900 Series X-in Low Energy Power Operator 5900 Series X-in Low Energy Power Operator INTRODUCTION The Norton 5900 Series X-in is a full-featured, extremely quiet, low energy door operator designed for moderate to high traffic doors. This cost-effective

More information

An ASSA ABLOY Group brand Series. Grade 2 Cylindrical Knob Locks

An ASSA ABLOY Group brand Series. Grade 2 Cylindrical Knob Locks An ASSA ABLOY Group brand 5300 Series Grade 2 Cylindrical Knob Locks Page Revised Electronically 4/11, 8/11 5300 series cylindrical knob locks built to last Yale 5300 series standard-duty cylindrical locksets

More information

Pilfergard Door Alarms

Pilfergard Door Alarms Alarm Lock PilFergard Door Alarms Pilfergard Door Alarms A PG10 Pilfergard model PG10 exit door alarm designed to deter the use of the secured door by sounding a twin action alarm when opened by unauthorized

More information

300 SERIES MINI MAGNETIC LOCK 1000 SERIES INDUSTRIAL MAGNETIC LOCK 1100 SERIES ARCHITECTURAL MAGNETIC LOCK 1100 SERIES MORTISE MAGLOCK & DOOR PULL

300 SERIES MINI MAGNETIC LOCK 1000 SERIES INDUSTRIAL MAGNETIC LOCK 1100 SERIES ARCHITECTURAL MAGNETIC LOCK 1100 SERIES MORTISE MAGLOCK & DOOR PULL 300 SERIES MINI MAGNETIC LOCK 300 Pounds Holding Force Ultra Small Size Available for 12 or 24 DC Voltage Low Current Draw The MM-300 electromagnetic lock is ideal for securing cabinets, drawers and small

More information

SPECIFICATION SECTION : FIRE RATED GLASS & FRAMING GPX Builders Series Fire Protective

SPECIFICATION SECTION : FIRE RATED GLASS & FRAMING GPX Builders Series Fire Protective Welcome to the SAFTIFIRST TM Guide Specification System prepared as an aid to specifiers in preparing written construction documents. For specification assistance with specific product applications, please

More information

SPECIFICATION SECTION : FIRE RATED GLASS & FRAMING GPX Builders Series Temperature Rise Door Framing

SPECIFICATION SECTION : FIRE RATED GLASS & FRAMING GPX Builders Series Temperature Rise Door Framing Welcome to the SAFTIFIRST TM Guide Specification System prepared as an aid to specifiers in preparing written construction documents. For specification assistance with specific product applications, please

More information