Integrated SensorDIM LED Driver Daylight Monitoring Version
|
|
- Alban Charles
- 5 years ago
- Views:
Transcription
1 TM Integrated SensorDIM ED Driver Daylight Monitoring Version Model: HEC730 with HRC-0.1 ED + ED - ED current selection 0 9 Daylight threshold Antenna module connector Buzzer ] PUSH Extended antenna Model: HEC730 Mechanical structure (mm) Further 20% saving Detection Pattern 0 Daylight Monitoring TM 2s~30min 2~0ux Ambient daylight threshold 2 in 1 and cost effective! This is a smart integration of HF (microwave) motion sensor and multiple current selection ED driver, which gives pre-selected constant current to drive the EDs to work based upon movement detection. Designed in the software and thanks to our worldwide patented circuit, the built-in daylight sensor is prior to motion sensor so as to achieve utmost energy saving purpose. With the detached sensor antenna SAM, it requires very little space on the ED panel. Only the antenna is installed on the surface, while the main body can be hidden behind the panel. Completely shadow free. Detached sensor antenna module: Model SAM Infrared remote receiver 3.9 Cable side entry Super-compact sensor antenna, with optional cable entry (side entry and back entry) Cable back entry Hytronik High frequency motion sensor 7
2 Product Functions and Features 1 Daylight monitoring function with threshold control 2 Tri-level control (corridor function) 3 Synchronization function Wall switch manual override (push function) Semi-auto function(absence detection) Further 20% initial 10,000 hours 7 ED current multi-selections mA 70mA 700mA 0mA 00mA 30mA Current The current can be easily configured by choosing the correct combination of the DIP switches (see table on the left). ED maximum load and voltage This multiple current ED driver has a wide range of loading capacity: Maximum different currents: 3.~17.W (30mA) ~2W (00mA).~2W (0mA@277V) /.~2W (0mA@120V) 7~30W (700mA@277V)/ 7~2W (700mA@120V) 7~30W (70mA@277V) /7~2W (70mA@120V) 9~23W (900mA) Maximum different currents: 10~0V (30mA) 10~0V (00mA) 10~V (0mA@277V)/ 10~V (0mA@120V) 10~3V (700mA@277V)/ 10~3V (700mA@120V) 10~0V (70mA@277V)/ 10~33V (70mA@120V) 10~2V (900mA) Settings (Remote Control HRC-0) O/ OFF Permanent O/OFF function Press the O/OFF button, the light goes to permanent on or permanent off mode, sensor is disabled. * Press Auto Mode, RESET or Scene mode buttons to quit from this mode. Auto Mode Sensor mode Press Auto Mode button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off. O/ OFF SC1 SC3 100% Scene mode Auto Mode SC2 SC 20% 0% 0% Reset 100% + Dim - Daylight Sensor 2ux Reset function Press RESET button, all settings go back to the value of DIP switch settings. Test 2s min 30s 1min 30min 0s 10s 1min 10ux min 0ux ux Dim +/- ong press Dim + or Dim to adjust the light brightness between ~100% during hold-time. + means dimming up, means dimming down. 30min M/A HRC-0 ote: the buzzer beeps one time when RC receives signal successfully. 77 Hytronik High frequency motion sensor
3 Test mode The button Test 2s is for testing purpose only. The sensor goes to test mode (hold-time is 2s) automatically after commissioning, meanwhile the stand-by period and daylight sensor are disabled. * This mode can be ended by pressing reset, or any button of scene mode and hold time. The sensor setting is changed accordingly. M/A Manual override / absence detection By pressing this button, the sensor goes to manual override or absence detection / semi-auto function. ote: The buzzer beeps twice if it s manual override function, and beeps once if shifts to absence detection function. 100% 0% output Press these buttons to select full output level. 0% button allows for energy saving and reverse dimming to compensate for ED lumen depreciation over time. Supports fluorescent 10,000 hr initial burn-in. ux ux disable Press this button to disable the daylight sensor for threshold control. When motion is detected, the fixture will always turn O, regardless of ambient light level. Ambient daylight threshold Press this button, the latest surrounding lux value overwrites previous lux value learned, and is set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance. Scene mode There are four scene modes fixed programs built-into the remote control. Select as appropriate. Each scene can be modified using the remote. The sensor will remember updates even after power outage. The green RESET button on remote reverts to original defaults. Scene options SC1 100% 1min 2ux SC2 100% min 2ux SC3 100% 30min 10ux SC 100% 0ux ote: end-user can adjust the settings by pressing buttons of detection range/hold-time/stand-by period/stand-by dimming level/daylight sensor. The latest setting stays in validity. Select as appropriate to adjust/reduce sensor sensitivity, detection range from 100%. Typical 100% sensor motion detection range is 9m. Please refer to detection pattern below. is time fixture remains at programmed full power level AFTER no motion is detected. Select daylight sensor threshold level at 2 UX / 10ux / 0UX. Ambient light must below this UX threshold for sensor to turn fixture O. Press Blue button to sample ambient light. Press ux button for fixture to always turn On when motion is detected. (tri-level control) Press the buttons of stand-by period to set stand-by period at 0s / 10s / 1min / / 30min / +. ote: 0s means on/off control; + means bi-level control, light never switches off when daylight sensor is disabled. Hytronik High frequency motion sensor 7
4 0 Press the buttons of stand-by dimming level to set the stand-by dimming level at / 20% /. Wiring Diagram_ Wiring Diagram_ + Maximum 10pcs ED+ ED- ED+ ED- ED+ ED- ED+ ED- Switch Dim Switch Dim Detection Pattern 0 9 Ceiling mounted height (m) 0% 7% Wall mounted height (m) 0% 7% Ceiling mounted detection pattern (m) Wall mounted detection pattern (m) Settings 1 can be reduced by selecting the combination on the DIP switches to fit precisely for each specific application. ote: by choosing Sensor OFF, it becomes a dimmable driver without sensor mode % 7% 0 % Sensor OFF I 100% II 7% III 0% IV Sensor OFF 2 means the time period to keep the lamp on 100%, after all motion has ceased (detection area vacated). ote: the maximum brightness during hold-time can be overridden by long push on the push-switch. 3 s 30s 3min I s II 30s III 3min IV 79 Hytronik High frequency motion sensor
5 3 The daylight threshold can be set on DIP switches, to fit for particular application. 0ux 10ux ux I II 0ux III 10ux IV ux (tri-level control) This is the time period you would like to keep at the low light output level before it is completely switched off in the long absence of people. ote: 0s means on/off control; + means bi-level control, fixture never switches off when daylight sensor is disabled. 7 0s 10s 30min + I 0s II 10s III 30min IV + This is the dimmed low light output level you would like to have after the hold-time in the absence of people. 9 I II Technical Data Operating voltage Input current Input power Stand-by power Warm time Daylight threshold HF (microwave) frequency HF (microwave) power Detection angle Mounting height Output ED current Output ED voltage Output ED power Empty load voltage factor Efficiency Operating temperature Abnormal protection EMC standard Safety standard Certification Dielectric strength Max. case temperature (Tc) IP rating Vac 0/0Hz A 31W (Max.) < 0.W 20s Sensor OFF/0% /7% /100% (100% /0% / on RC) s /30s /3min / (TEST 2s/30s /1min /min / /30min on RC) ux/10ux/0ux/disable (2ux /10ux / 0ux /ux disable on RC) 0s/10s/30min/+ ( 0s /10s / 1min / / 30min /+ on RC) / (/ 20%/ on RC).GHz+/-7MHz <0.2mW Max. (OxH): 12m x m 30 o ~10 o Max. m 30mA/00mA/0mA/700mA/70mA/900mA 10~0V (30mA) 10~0V (00mA) 10~V (0mA@277V)/ 10~V (0mA@120V) 10~3V (700mA@277V)/ 10~3V (700mA@120V) 10~0V (70mA@277V)/ 10~33V (70mA@120V) 10~2V (900mA) 3.~17.W (30mA) ~2W (00mA).~2W (0mA@277V) /.~2W (0mA@120V) 7~30W (700mA@277V)/ 7~2W (700mA@120V) 7~30W (70mA@277V) /7~2W (70mA@120V) 9~23W (900mA) 0V >0.9 % (Max.) -20 o C ~ +0 o C Output short-circuit protection with auto-reset Part 1B U 70 cuus listed, FCC Inputoutput:370Vac /ma/1min 7 o C IP20 Hytronik High frequency motion sensor 0
Tri-level Control Sensor
Daylight Monitoring Photocell Advance TM One-Key Commissioning Ambient daylight threshold oop in oop out Tri-level Control Sensor HC038V HCD038 Detached inear Version with Remote Control Applications Occupancy
More informationPremium Version Tri-level Dimming Control
0 Premium Version Tri-level Dimming Control Model: HC9VRC with HRC-0 Infrared remote receiver Detection area Buzzer Sensor antenna indication Daylight threshold Stand-by period. 86. 9. 0 Installation hole
More informationBuilt-in HF Sensor for High Bay
Daylight Monitoring RX TM Synchronisation control Ambient daylight threshold Built-in HF Sensor for High Bay HC419VRC/R Tri-level Control With Synchronisation and Remote Control Applications Occupancy
More informationTri-level Control HF Sensor
Daylight Monitoring TM Ambient daylight threshold Loop in Loop out Tri-level Control HF Sensor HC403VRC-KD Detached Version with Daylight Monitoring Applications Occupancy detector with tri-level dimming
More informationDaylight harvest function to regulate light output for maintaining required lux level
TM Ambient daylight threshold oop in oop out HF Aisle Sensor Trilevel Control with Daylight Harvest and Remote Control Applications Occupancy detector with trilevel dimming control suitable for below applications:
More informationTri-level Control HF Sensor
Photocell Advance RX TM Synchronisation control oop in oop out Tri-level Control HF Sensor Synchronised Control Version with Photocell Advance TM Applications Occupancy detector with tri-level control
More informationTri-level Control HF Sensor
Tri-level Control HF Sensor Standard Version Applications Occupancy detector with tri-level control suitable for indoor use. Suitable for building into the fixture: Office / Commercial Lighting Use for
More informationFalse Ceiling HF Sensors
False Ceiling HF Sensors HC009S/EXT HC018V/EXT HC019V/EXT Applications Ideally suited to retrofit projects where the luminaire is too small to accomodate the sensor internally, this motion sensor can be
More information64.7 Ø85. (1) Sensor inset (2) Lens pluggable. (3) Protection cover (covers the high-voltage terminals). (4) Ceiling (drill hole Ø70mm).
Flush Mount PIR Motion Sensor PIR 1-10V Dimming with Remote Control Mechanical Structure 70mm 64.7 4 56 68.1 73.3 Ø85 3 (1) Sensor inset (2) Lens pluggable Infrared receiver 1 Photocell LED indicator (3)
More informationIP65 High Bay Dual Sense Sensor
IP65 High Bay Dual Sense Sensor TM and, 1-10V Dimming with Remote Control Technical Data Input Characteristics Sensor Data Model No. Model No. Mains voltage 220-240VAC 50/60Hz Sensor principle High Frequency
More informationLED HIGH BAY LINEAR ECO SERIES
PROJECT NAME: CATALOG NUMBER: NOTES: FIXTURE SCHEDULE: Page: 1 of 5 LED HIGH BAY LINEAR ECO SERIES PRODUCT DESCRIPTION: The Eco High Bay Series is a cost-effective and quality solution for lighting warehouses,
More informationIP65 High Bay Dual Sense Sensor
IP65 High Bay Dual Sense Sensor TM and, Daylight Harvest with Remote Control Technical Data Input Characteristics Sensor Data Model No. Model No. Mains voltage 220-240VAC 50/60Hz Sensor principle High
More informationFSTR- Series Microwave Motion Sensor (MSSD) Dimming Function/Detachable Version for LED Tri-proof Light & LED Batten. Introduction
Dimming Function/Detachable Version for LED Tri-proof Light & LED Batten Introduction Unique split design makes it suitable to fix within lamps which have limited space. Automatic dimming when used in
More informationHF Motion Sensor Introduction
HF Motion Sensor Introduction Completely built-in the lighting fixture, the motion sensor utilizes Doppler principle and RADAR technology to detect moving objects at certain speed & reflection surface,
More informationLoop out. Ambient daylight threshold
transmitter 0 ULT - HC9V Type of Product: Description: Finish: Warranty: Tri-level Dimming Control Microwave Motion Sensor Colour White years Daylight threshold Stand-by period Stand-by dimming level Antenna
More informationNorth America Version / Dimming Function. Introduction
orth America Version / Dimming Function /OFF Introduction Automatic switching or dimming when used in combination with 1-10V dimmable ED drivers or ballasts. Built-in daylight. 1-10V interface can match
More informationMSSD- microwave sensor, Factory Set standard 3 minute delay 50% step dimming. (additional options 20% / 50%, delay from 1 to 20 minutes)
MSSD- microwave, Factory Set standard minute delay step dimming. (additional options % /, delay from to minutes) ing m FTR SeriesimMicrowave Motion Sensor (MSSD) D Microwave, factory set standard minute
More informationCeiling PIR HS presence detector. Product Guide. Overview. Features
Product Guide 796-2047 Ceiling PIR HS presence detector Overview The 796-2047 (passive infrared) presence detector provides automatic control of lighting loads with optional manual control. This is a high
More informationThe two type sensors are innovative and active motion dimmable LED drivers or ballasts.
Dimming Function (Standard Version) R (Reinforced Version) Introduction Automatic dimming when used in combination with 1-V The two type sensors are innovative and active motion dimmable LED drivers or
More informationBIANCO SENSOR FLUSH MOUNT 15W MODEL # GBCL400HFSR
BIANCO SENSOR FLUSH MOUNT 15W MODEL # GBCL400HFSR DESCRIPTI & FEATURES With High Frequency Occupancy On/ Off Sensor ; HF System: 5.8GHz±75MHz, ISM wave band Sensor Power consumption : 0.5W(- standby);
More informationIntroduction. Dimming Function MC003V (Standard Version) MC003V R (Reinforced Version)
Dimming Function MC00V (Standard Version) MC00V R (Reinforced Version) Dimming Introduction Automatic dimming when used in combination with 1-V dimmable LED drivers or ballasts. Built-in adjustable daylight
More informationEmergency Lighting Control Gear Combo Economy Version (2 in 1)
Emergency Emergency Lighting Control Gear Combo Economy Version (2 in 1) HEM09/E / HEM09H/E Applications Suitable for LED panels - insulated terminal cover with cord restraint: Office / Commercial Lighting
More informationCeiling PIR HS presence detector 1-10V, low temperature. PIR Sensor. IR Receiver. Light Level Sensor. Status LEDs. IR Receiver
Product Guide EBDHS-AD-LT30 Ceiling PIR HS presence detector 1-10V, low temperature Overview The EBDHS-AD-LT30 PIR (passive infrared) presence detector provides automatic control of lighting loads with
More informationProduct Specifications
//206 00 VLN0 Product Specifications Nastro LED High Bay W Nastro LED High Bay EO-LN- EO-LN-T EO-LN-HV EO-LN-HVT Linear Design System Light Efficacy LPW Easy Installation & Maintenance IP6/ IP30(PIR) Five
More informationLED High Bay. 150W LED High Bay GLC-ANHB-150W-1. PERFORMANCE LED Chip Lumen Output (IES) Power Consumption Efficacy (IES) Beam Angle
GreenLight cooperative Product Specifications LED High Bay W LED High Bay GLC-ANHB-W- Linear Design System Light Efficacy >0 LPW Easy Installation & Maintenance IP6/ IP30(PIR) Five Years Warranty ETL,
More informationLighting Control. Sensor Daylight 2. Daylight+Motion 3. Daylight+Motion+Control 4. Daylight+Motion+Control IP67 5
Lighting Control Sensor Daylight 2 Daylight+Motion 3 Daylight+Motion+Control 4 Daylight+Motion+Control IP67 5 Daylight SL01A Daylight+Motion+Control SM03A Daylight+Motion SM05 With the increasing interests
More informationHigh bay PIR presence detector 1-10V dimming. PIR Sensor. IR Receiver. Light Level Sensor. Status LEDs. IR Receiver
Product Guide EBDSPIR-HB-AD High bay PIR presence detector 1-10V dimming Overview The EBDSPIR-HB-AD PIR (passive infrared) presence detector provides automatic control of lighting loads with optional manual
More informationMWS6-PRM. Ceiling microwave presence/absence detector. Product Guide. Overview. Features
Product Guide MWS6-PRM Ceiling microwave presence/absence detector Overview The MWS6-PRM microwave presence detector provides automatic control of lighting loads with optional manual control. The MWS6-PRM
More informationCeiling PIR presence detector DALI / DSI dimming. PIR Sensor. IR Receiver. Light Level Sensor. Status LEDs. PIR Sensor.
Product Guide EBDSM-DD Ceiling PIR presence detector DALI / DSI dimming Overview The EBDSM-DD PIR (passive infrared) presence detector provides automatic control of lighting loads with optional manual
More informationPPAD-C-230V. Ceiling PIR presence/absence detector. Product Guide. Overview. Features
Product Guide PPAD-C-230V Ceiling PIR presence/absence detector Overview The PPAD-C-230V passive infrared presence detector provides automatic control of lighting loads with optional manual control. The
More informationMWS3A-PRM. Ceiling microwave presence/absence detector. Product Guide. Overview. Features
Product Guide MWS3A-PRM Ceiling microwave presence/absence detector Overview The MWS3A-PRM microwave presence detector provides automatic control of lighting loads with optional manual control. The MWS3A-PRM
More informationHIGH LUMINOUS EFFICIENCY
Warehouses, factories, and other industrial facilities have always relied on high bay lighting to provide bright light to large spaces. Now, ASD offers an all-in-one solution to these lighting applications.
More information, ,
796-2028, 796-2021, 796-2025 Batten mount PIR detectors Overview This series of miniature PIR (passive infrared) presence detectors provide automatic control of lighting loads with optional manual control
More informationSWITCHLITE MRE SLD MAN SWITCHLITE MRE SLD IP55
96239823 SWITCHLITE MRE SLD MAN 96239821 SWITCHLITE MRE SLD IP55 Overview The SWITCHLITE MRE SLD PIR (passive infrared) presence detector provides automatic control of lighting loads with optional manual
More informationEBDSPIR-PRM-VFC & EBDSPIR-PRM-VFC-NC
Product Guide EBDSPIR-PRM-VFC & EBDSPIR-PRM-VFC-NC Ceiling PIR presence/absence detector Overview The EBDSPIR-PRM-VFC PIR (passive infrared) presence detector provides automatic control of lighting loads
More informationHigh bay PIR presence detector DALI / DSI dimming. PIR Sensor. IR Receiver. Light Level Sensor. Status LEDs. IR Receiver
EBDSPIR-HB-DD Product Guide High bay PIR presence detector DALI / DSI dimming Overview The EBDSPIR-HB-DD PIR (passive infrared) presence detector provides automatic control of lighting loads with optional
More informationProduct Specifications
VLN Product Specifications Nastro LED Garage Light W Nastro LED Garage Light EO-LN- EO-LN-T EO-LN-HV EO-LN-HVT Linear Design System Light Efficacy > LPW Easy Installation & Maintenance IP Five Years Warranty
More information0118M Series. Vision For Future LED SURFACE MOUNTED PANEL LIGHT WITH SENSOR OPTION. High light efficiency Energy saving Long life
0118M Series Vision For Future LED SURFACE MOUNTED PANEL LIGHT WITH SENSOR OPTION High light efficiency Energy saving Long life Led surface mounted panel lights can be made in any shape or size to replace
More information11,1 30. Ordering data
ID Compact control module with ambient light sensor and motion sensor Compact dimensions for luminaire installation For up to 10 DSI or I ballasts I/DSI output channels with adjustable negative offset
More informationProduct Guide. Ceiling PIR presence detector DALI / DSI dimming. PIR Sensor. IR Receiver. Light Level Sensor. Status LEDs.
Product Guide LPCMPIRDSI Ceiling PIR presence detector DALI / DSI dimming Overview The LPCMPIRDSI PIR (passive infrared) presence detector provides automatic control of lighting loads with optional manual
More informationProduct Guide. Ceiling microwave presence detector DALI / DSI. Microwave Sensor. IR Receiver. Light Level Sensor. Status LEDs.
MPAD-C-DALI-230V Product Guide Ceiling microwave presence detector DALI / DSI Overview The MPAD-C-DALI-230V microwave presence detector provides automatic control of lighting loads with optional manual
More informationDALI MSensor 02 Multi-sensor for DALI system
MSensor 02 Multi-sensor for system Component of the comfortdim system ( standalone) With ambient light dependent control and motion detection Simple group assignment via rotary switch Multiple MSensors
More informationLED DRIVER CATALOGUE HYTRONIK USA LLC HYTRONIK UK LTD. Priory House, Mimram Road, Hertford, Hertfordshire SG14 1NN
HYTROIK UK TD. HYTROIK USA C United Kingdom Ireland United States Canada Priory House, Mimram Road, Hertford, Hertfordshire SG Tel: + (0)99 50 Email: sales@hytronikuk.com 90 Holten Street, Suite 00, Danvers,
More informationDALI MSensor 02 Multi-sensor for DALI system
MSensor 02 Multi-sensor for system Product description Component of the comfortdim system ( standalone) With ambient light dependent control and motion detection Simple group assignment via rotary switch
More informationCPPG ENERGY EFFICIENT CANOPY LIGHTS FOR PARKING AREAS
ENERGY EFFICIENT CANOPY LIGHTS FOR PARKING AREAS ENERGY EFFICIENT CANOPY LIGHTS FOR PARKING AREAS PROJECT TYPE YEAR WARRANT Y Prodigy's canopy lights offer a unique combination of energy efficiency, reliability
More informationCeiling Microwave presence detector - DALI / DSI 12-24V AC/DC. Microwave Sensor. IR Receiver. Light Level Sensor. Status LEDs.
MWS6-DD-LV Product Guide Ceiling Microwave presence detector - DALI / DSI 12-24V AC/DC Overview The MWS6-DD-LV microwave presence detector provides automatic control of lighting loads with optional manual
More informationMaxim3 TM Series IP66. LED Vapor Tight - Waterproof Key Features
Maxim3 TM Series PROJECT NAME: CATALOG: NOTES: LED Vapor Tight - Waterproof Key Features Up to 146 IP66 87 UL 4, 5 & 8 K & K 110-277V NSF Stainless Steel Clips Operating Temp - o F to 105 o F 7 Year Warranty
More informationEBDSPIR-PRM-LV Product Guide
EBDSPIR-PRM-LV Product Guide Ceiling PIR presence/absence detector 12-24V AC/DC Overview The EBDSPIR-PRM-LV PIR (passive infrared) presence detector provides automatic control of low voltage loads including
More informationPIR/INT & PIR/INT-D. Batten mount PIR detectors. Product Guide. Overview. Features
Product Guide PIR/INT & PIR/INT-D Batten mount PIR detectors Overview The PIR/INT & PIR/INT-D miniature PIR (passive infrared) presence detectors provide automatic control of lighting loads with optional
More informationIntegrated PIR detectors
EBMINT - Product Guide Integrated PIR detectors Overview The EBMINT series of miniature PIR (passive infrared) presence detectors provide automatic control of lighting loads with optional manual control
More informationVITMR-EBDSPIR-PRM. PIR Presence/Absence Detector IR with Ceiling Rose. Product Guide. Overview. Features
Product Guide VITMR-EBDSPIR-PRM PIR Presence/Absence Detector IR with Ceiling Rose Overview The VITMR-EBDSPIR-PRM PIR (passive infrared) presence detector provides automatic control of lighting loads.
More informationMWS5. Miniature Microwave Presence Detector (standalone) Product Guide. Overview. Features
Product Guide MWS5 Miniature Microwave Presence Detector (standalone) Overview The MWS5 series of miniature microwave presence detectors provide automatic control of lighting loads with optional manual
More informationMPAD-C 12-24V. Ceiling microwave presence/absence detector 12-24V AC/DC. Product Guide. Overview. Features
Product Guide MPAD-C 12-24V Ceiling microwave presence/absence detector 12-24V AC/DC Overview The MPAD-C 12-24V Microwave presence detector provides automatic control of low voltage loads including lighting
More informationEBMPIR-MB. Batten mount PIR detectors. Product Guide. Overview. Features
Product Guide EBMPIR-MB Batten mount PIR detectors Overview The EBMPIR-MB series of miniature PIR (passive infrared) presence detectors provide automatic control of lighting loads with optional manual
More informationEBDHS-DD-LT30. Ceiling PIR HS presence detector DALI / DSI, low temperature. Product Guide. Overview. Features
EBDHS-DD-LT30 Product Guide Ceiling PIR HS presence detector DALI / DSI, low temperature Overview The EBDHS-DD-LT30 PIR (passive infrared) presence detector provides automatic control of lighting loads
More informationMWS3 Ceiling Mount Microwave Occupancy Detector
MWS3_0916/ISSUE1 MWS3 Ceiling Mount Microwave Occupancy Detector Description: the MW3SA offers a unique presence/absence detection capability by using an adjustable head. This incorporates an innovative
More informationLPCMPIRM65 & LPCMPIRDSI65
Product Guide LPCMPIRM65 & LPCMPIRDSI65 Luminaire high mount PIR detectors Overview The LPCMPIR PIR (passive infrared) presence detector provides automatic control of lighting loads with optional manual
More informationMicrowave Sensor. Basic Microwave Sensor. Energy Saving Motion Sensor. Introduction Features Technical Specification. 3 Dimensions
Energy Saving Motion Sensor Introduction Features Sensor detection pattern 2 3 Dimensions Function Guidelines Installation and Wiring Wiring diagrams Set up guide About One-LUX Get in touch 4 5 6 Introduction
More informationTechnical Application Guide for UP-SHINE LED Ceiling light UP-AL W-SS.
Technical Application Guide for UP-SHIE ED Ceiling light UP-A8-12-18W-SS Introduction Up-shine surface mounted led ceiling light adopts high lumen SMD led, fire rated PC diffuser with even light output.
More informationHIGH POWER LED RETROFIT MODULE
LEDBLOCK G3 HIGH POWER LED RETROFIT MODULE The LEDBLOCK is a patented extruded aluminum design that replaces HID, HPS, or MH lamps. The installation bracket of the LEDBLOCK G3 comes partially assembled
More informationCeiling Microwave presence/absence detector 12-24V AC/DC
MWS3A-PRM-LV Product Guide Ceiling Microwave presence/absence detector 12-24V AC/DC Overview The MWS3A-PRM-LV Microwave presence detector provides automatic control of low voltage loads including lighting
More informationProduct Guide. Ceiling PIR HS presence detector DALI / DSI dimming. PIR Sensor. IR Receiver. Light Level Sensor. Status LEDs.
PPAD-C-HB-DALI-230V Product Guide Ceiling PIR HS presence detector DALI / DSI dimming Overview The PPAD-C-HB-DALI-230V PIR (passive infrared) presence detector provides automatic control of lighting loads
More informationPIR movement and presence detectors 10 A
PIR movement and presence detectors 10 A Hotel room energy-enabling units ighting control in corridors (for hotels, offices and hospitals) Offices, swimming baths and schools SЕRIES Staircase light control
More informationLPC3BSP65 & LPC3BDP65
Product Guide LPC3BSP65 & LPC3BDP65 Batten mount PIR detectors Overview The LPC3B series of miniature PIR (passive infrared) presence detectors provide automatic control of lighting loads with optional
More informationEBDSPIR-PRM-2CH, EBDSPIR-PRM-2CH-NC
Product Guide EBDSPIR-PRM-2CH, EBDSPIR-PRM-2CH-NC Ceiling PIR presence/absence detector 2 channel Overview The EBDSPIR-PRM-2CH PIR (passive infrared) presence detector provides automatic control of lighting
More informationPRODUCT DATA AND INSTALLATION SHEET MWS5-SA STAND ALONE MINIATURE CEILING MOUNTED MICROWAVE PRESENCE DETECTOR
8. SPECIFICATION LOAD 6 Amps fluorescent and incandescent lighting. 3 Amps compact fluorescent lighting. 3 Amps low energy lighting. 3 Amps low voltage lighting (switch primary of transformer). Switch
More informatione-sense move dali Manual
e-sense move dali Manual Page Content The Basic Function of Move...4 5 Programming RF-signal...6 7 Erase RF-signal...8 Pre-set Scenes...9 Receiving RF-signal Options...10 Reduced Power, Standby Dimming
More informationData sheet. Function description. Benefits
uminaire-integrated modules ENOTEC modular system 110046819 Control CD I 110046818 Control CD CO1 110046814 ensor ED HF1 110046813 ensor ED HF2 110046816 ensor ED PIR Function description The new ENOTEC
More informationTebis application software
5 Tebis application software STCC530E 2-channel presence detector 360 A faire Product reference Description TP device RF devices TCC530E Bi-zone presence detector TCC530E Output module: Dimmer Loads connected
More informationProgrammable multi-functional energy saving lighting control. Easy to install and commission
ControlZAPP PROGRAMMABE IGHTIG COTROS Programmable multi-functional energy saving lighting control ControlZAPP is the innovative lighting controls range the freedom to configure the best energy saving
More information11,9. Ordering data. Max. cable length sensor head 1 basicdim ILD lx 150 lx m 1
Compact dimensions for luminaire installation For up to 10 DSI or DALI devices (max. 5 per output channel) DALI/DSI output channels with adjustable negative offset from channel to channel 1 Ambient light
More informationGE Lighting. Lighting Controls. DALI Digital Lighting Controls
GE ighting ighting Controls I Digital ighting Controls the I Protocol Multi-functional control of I-ready GE uminaires 1-1 to I converters available for analogue luminaires I CB Type 2 - complete programmable
More informationEBMHS (standard & slim-line PSU)
Product Guide EBMHS (standard & slim-line PSU) Miniature HS PIR Presence Detector (luminaire fitting) Overview The EBMHS series of miniature PIR (passive infrared) presence detectors provide automatic
More information600 Watt Dimmer Install Guide
600 Watt Dimmer Install Guide ER6CD This guide covers all models of the ER6CD lighting controller. The box contents includes the controller with lock nut and installation guide. Overview The ER6CD controller
More informationluxcontrol lighting control system basicdim basicdim ILD Compact control module with ambient light sensor and motion sensor
ILD Compact control module with ambient light sensor and motion sensor Compact dimensions for luminaire installation For up to 10 DSI or DALI devices (max. 5 per output channel) 2 DALI/DSI output channels
More informationProduct Guide. Ceiling microwave presence detector DALI / DSI. Microwave Sensor. IR Receiver. Light Level Sensor. Status LEDs.
MPAD-C-A-DALI-230V Product Guide Ceiling microwave presence detector DALI / DSI Overview The MPAD-C-A-DALI-230V microwave presence detector provides automatic control of lighting loads with optional manual
More informationCeiling Microwave presence detector - DALI / DSI 12-24V AC/DC. Microwave Sensor. IR Receiver. Light Level Sensor. Status LEDs.
MWS3A-DD-LV Product Guide Ceiling Microwave presence detector - DALI / DSI 12-24V AC/DC Overview The MWS3A-DD-LV microwave presence detector provides automatic control of lighting loads with optional manual
More informationProduct and Applications Description
Product and Applications Description The presence detector with a sensing range of 360 allows the automatic execution of control functions in the electrical system by detecting movements. For example,
More informationSWITCHLITE MRE DDM ADJ
96239889 SWITCHLITE MRE DDM ADJ Front features Mounting Bezel Back features Retaining Spring Power Input & Switched Output Connector (Channel 1) Sensor Lens which covers... Microwave Sensor IR Receiver
More informationTOCR02 2 PART MICRO MOTION SENSOR W/IR REMOTE CONTROLLER
TOCR0 PART MICRO MOTION SENSOR W/IR REMOTE CONTROLLER SAFETY PRECAUTIONS Be sure to switch off power source before installing. Make sure that the power wiring comes from circuit with an external 16A miniature
More informationDHL-LP-LED Low Profile LED Linear High/Low Bay
Job Information Type: Catalog #: Project: Comments: Prepared by: WARRANTY WARRANTY YEAR TEN INCLUDES LABOR ALLOWANCE 2 65W/90W Version 23.81 2 135W Version For 4 dimensions see pg 2 23.81 23.81 23.81 12.6
More informationF series. echoflex. Slim Line Dimming Controller. Product Overview ER1S-FC
echoflex Powered by ETC ER1S-FC Slim Line Dimming Controller F series This guide covers the F series of the Complete Room Controller, model number ER1S-FCU equipped with a 902 MHz radio. The box contents
More informationluxcontrol lighting control system basicdim basicdim ILD 16DPI 69f Compact control module with ambient light sensor and motion sensor
ILD 16DPI 69f Compact control module with ambient light sensor and motion sensor Product description Compact dimensions for luminaire installation For up to 10 DSI or LI devices (max. 5 per output channel)
More informationµdim Microwave Sensors User Manual
Microwave Sensors User Manual P e o p l e I n n o v a t i o n s S o l u t i o n s 1. Introduction µdim Table of Contents Page Introduction 2 Technical data 3 Dimensions and mounting options 9 Connections
More informationPassive infrared ceiling sensor
Passive infrared ceiling sensor 88 Description Control and command device, powered by the SCS BUS, with two different sensors, the combination of which enables managing the light level inside the room,
More informationDirect Dim Microwave Presence/Absence Detector
Product Guide MWS3A-DD Direct Dim Microwave Presence/Absence Detector Contents Section Contents Page 1 Dimensional information 1 2 Description and operation 2 3 Wiring & Fixing 3 4 Installation 3 5 Fixing
More informationAnalogue Dimming Microwave Presence/Absence Detector
Product Guide MWS3A-AD Analogue Dimming Microwave Presence/Absence Detector Contents Section Contents Page 1 Dimensional information 1 2 Description and operation 2 3 Wiring & Fixing 3 4 Installation 3
More informationXEON. High impact resistant body and PC cover. Double layer coating. through wiring. Build-in microwave sensor.
XEON is a rectangular shape wall or ceiling fixture. This luminaire family has a robust aluminium construction housing with a high impact resistant polycarbonate diffuser. It is to be operated with LED
More informationMotion Sensor. For Outdoor Use. Wall & ceiling mounted. Quick & Easy Installation 2 Channels
MS3602CH 2 Channel Motion Sensor For Outdoor Use Wall & Ceiling Mounted Quick & Easy Installation 2 Channels Channel 2 Distance Wiring Diagram 220-240V ~ 50Hz 14A Max. (cosø=1) 3000W for incandescent load
More informationDual Technology Wall Mounted Occupancy Sensor. Manual & Specification
Dual Technology Wall Mounted Occupancy Sensor Manual & Specification PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH LOCAL ELECTRICAL CODES Douglas Lighting Controls Page 1 December 16, 2013 1. INTRODUCTION
More informationSENSA MRE DDM MR
96239831 SENSA MRE DDM MR Contents Section Contents Page 1 Dimensional information 1 2 Description and operation 2 3 Wiring and fixing 3 4 Programming 6 5 Wiring diagrams 8 6 Detection pattern diagrams
More informationLED T8 Tube Standard T8 LED TUBE (L05G-H)
LED T8 Tube Standard T8 LED TUBE (L05G-H) www.ervan.cn Universal Application L05G-H Standard T8 LED TUBE CB [ [ (Applying) Type Approved safety Regular Production Surveillance www.tuv.com ID 200000000
More informationDescription FEATURES. l Innovative dual mount system requires only one sensor for either flush or surface mount applications
Simple Fit Switching Sensors 1.8m to 3m Cone-shaped detection pattern, 6m radius at mounting height 6.0m AC220~240V/50Hz MK Simple Fit Sensors offer cost effective presence detection for lighting control
More informationF series. Complete Room Controller. echoflex Powered by ETC. Product Overview ERDRC-FC
echoflex Powered by ETC Complete Room Controller F series ERDRC-FC This guide covers the F series of the Complete Room Controller, model number ERDRC-FCU equipped with a 902 MHz radio. The box contents
More informationDual Technology Wall Switch Occupancy Sensor. Manual & Specification
Dual Technology Wall Switch Occupancy Sensor Manual & Specification PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH LOCAL ELECTRICAL CODES Douglas Lighting Controls Page 1 November 19, 2014 1. INTRODUCTION
More informationConnections, displays and operating elements C D E G H. Installing the control unit
1 2 3 GB Control unit 0-10 V REG-K/3-gang with manual mode Operating instructions Art. no. MTN646991 ¼ DANGER Risk of fatal injury from electrical current. All work on the device should only be carried
More informationSTAND-ALONE PRODUCT GUIDE HYTRONIK INDUSTRIAL LIMITED HYTRONIK INDUSTRIAL LIMITED CHINA FACTORY PIR USA WAREHOUSE HYTRONIK UK LTD.
CHINA FACTORY 3rd Floor, block C, Hongyang Industrial Park, 155#, Bai'gang road south, Bai'gang village, Xiao Jin Kou, Huicheng district, Huizhou 516023 Tel: +86-752-2772020 Fax: +86-752-2777877 E-mail:
More informationMWS3A-PRM Product Guide
MWS3A-PRM Product Guide Microwave Presence/Absence Detector Contents Section Contents Page 1 Dimensional information 1 2 Description and operation 2 3 Wiring & Installation 3 4 Fixing - Flush 4 5 Fixing
More informationCoolTouch TM control system
READ AND SAVE THESE INSTRUCTIONS CoolTouch TM control system 3R200, 3R400, 3W500 U.S. Patent Pending CAUTION: This control system was designed to operate and work with a specific Kichler Ceiling Fan ONLY.
More information