Pandora Smart Pro QUICK START GUIDE. model

Transcription

1 Pandora Smart Pro QUICK START GUIDE model

2 Full instruction guide and explanation videos:

3 Register as a user and download app Go to the page pandora-on.com and register yourself as a user. Confirm the received concerning registration. Registering is possible also via mobile application. Download Pandora mobile application: Pandora Pro - in Apple App Store Pandora Online - in Android Google Play Store Login with your registered user ID, then add the vehicle by using information on the code card (to ensure operability of the system, the installer could already remove the pattern from the code card). Add vehicle: My Devices / + login and pass data from the code card code card Vehicle can be added into several telephones (no limit), up to 3 vehicles can be added under a single account. Setup the app The mobile application includes several functions, which can be set as required. Initially the application has been set so that the app notifies of any operations. All notifications can be enabled or disabled from the app.

4 Main view of the mobile application Enabling/disabling notifications Starting the engine from mobile app For remote start from the app, the alarm shall be on guard. Press and hold the icon Engine Start. For most vehicles it is also possible to control central lock of the vehicle with the app. In initial setup, the engine operates 20 minutes. Remote start from original remote control - 3 x LOCK Remote start of the vehicle may be possible also with the remote control of the vehicle. Pandora shall be on guard (~10 sec from locking), press the lock button on the remote control of the vehicle slowly 3 times. Information of the vehicle on the display of the app Surveillance mode, status of doors, hatches and ignition system can be viewed through the app. When the vehicle is remote started, the system first disables movement and shock sensors (relevant icons at the back of the vehicle), and then the symbols of ignition and operating engine are displayed.

5 Sensor on the engine shows temperature of the engine, while sensor on Pandora circuit board shows approximate interior temperature in the vehicle. In case of certain vehicles, the app also shows fuel level and external temperature (depends on CAN network of the vehicle). Engine temperature Engine preheater Battery voltage Brake pedal Ignition Interior temperature Surveillance mode icon Surveillance active Fuel level in tank Location coordinates of the vehicle! External temperature Automatic start of engine "Hands-free " mode active Monitoring of location Call Automatic start of engine preheater Selected siren mode GPS receiver GSM connection Text message Open door/hatch is shown in blue Shock sensor Extra sensor (interior) Tilt sensor

6 GPS Integrated GPS receiver enables to view the location of the vehicle in Pandora Online environment as well as through the mobile app. By activating storage of drive history (tracking), all journeys of the vehicle can be reviewed in detail. Login to your account in pandora-on.com and export detailed travel report. Type of map for display can be selected in the app (App/Map Source) Yandex Open Street Map Google By activating GPS tracking, you see the travel history Extra remote controls Pandora has 2 extra remote controls, which are needed, if: - The original remote control does not open the doors any more after remote start - You use the immobilizer function - You use additional protection against keyless key copying. In such case the extra remote control shall be readily available, otherwise the alarm is activated, when doors are opened with the original remote control. - You use the remote controls in hands-free mode

7 - Hands-free or keyless mode of remote controls GSM command code can be used to activate keyless mode, where doors can be locked, if you move away from the vehicle with remote control, and move to the vehicle to open the doors. In such case there is no need to press the buttons on remote control. By connecting Smart Pro and telephone via Bluetooth, you can optimise sensitivity of hands-free in the mobile app. Immobilizer When engine blocking is connected (optional) and immobilizer function is activated, Pandora can be used also as an immobilizer. It is possible to drive the vehicle only when the remote control is readily available. GSM command codes All operations can be performed also with DTMF tones or by calling the vehicle and entering relevant command code via keyboard. In case of non-android/ios telephone this is the only option. Activating surveillance Deactivating surveillance Starting/preheating the engine Stopping the engine Enabling engine blocking Disabling engine blocking Activating maintenance mode Deactivating maintenance mode Activating preheater Deactivating preheater Enabling "hands-free" activation of surveillance Disabling "hands-free" function Enabling "hands-free" deactivation of surveillance only after remote start Enabling "hands-free" deactivation of surveillance Forcing GPRS session

8 Bluetooth mode When GSM communication is lacking or the vehicle is located within the radius of ~30m, Pandora will automatically switch into bluetooth mode. To enable this, first connect telephone bluetooth with the vehicle. To connect the telephone: Enter PIN code (initially ) and then (after a moment) press the key 18 more times in succession. LED emits 18 confirmations and should then remain lit in green. LED is lit red, press and hold the key for 4 seconds, then release - LED lights green, i.e. ready for connecting the telephone. Enter PIN code When entering PIN code, the gap between entry of each number shall be ~2 seconds, i.e. when red LED goes off, start immediately entering the next number. In case of 18 times, press in succession, i.e. without a pause. When you cannot find the switch in the vehicle, consult the installer for location. In the mobile app, open Settings - Bluetooth Control (telephone bluetooth shall be activated). DXL-1920L is displayed under Device, click it and enter PIN code (if asked by the device, look also in the notifications of the telephone). Then press LED key 1 more time for saving the telephone and exit from the mode. Switch on/off ignition of the vehicle and lock/open the central lock of the vehicle several times, using the remote control of the vehicle itself. This way you exit the programming mode and synchronise remote controls of the vehicle with Pandora. The vehicle becomes visible in the app (dot at top right shall be green; if it is red, restart the app).

9 When Bluetooth connection fails - The telephone shall have at least Bluetooth 4.0 (most models do) - During connection the telephone asks confirmation (or PIN code), which can remain unnoticed (look notifications in the telephone, scrolling down with your finger) - Connection attempt has already been made, but not finished; delete DXL-1920 in bluetooth settings of the telephone itself and try again - Only one telephone can be connected via Bluetooth Changing parameters of Hands Free or keyless mode There are 2 parameters for changing sensitivity of keyless mode of active remote controls, enabling to optimize coverage area of the remote control as required. Enabling automatic locking Enabling automatic opening Deactivating surveillance without active remote control will trigger alarm General sensitivity. Larger number means wider coverage. Recommended interval Response speed. Generally Mobile device can be turned into active remote control only in setup menu, or PIN code shall be entered first

10 Disconnecting the telephone (bluetooth): In order to store a new telephone, first delete the previous one from the memory of the device. Operate similarly to connecting, but after x18 press of key, hold the key for 4 seconds. When you release the key, the telephone is deleted. Storing owner s number When alarm is triggered, the mobile app provides immediate notification. If you want also to receive a call in case of alarm, you must store telephone number of the owner. In order to ensure security, owner s or Main number can be stored only with Pandora AlarmStudio software or through the main settings menu. To enter the main settings menu: 1. Deactivate surveillance of the system 2. Call the number of the device. Wait until the device responds 3. Start ignition and hold 1-3 seconds, then switch off. The system will switch into the programming mode of settings (see all functions, which can be changed, in the detailed user manual). Example of changing the owner s number in the system: 1. Enter the settings menu as described above 2. Select the command 1* (telephone number settings) and 1* (owner s number) 3. Enter the new owner s telephone number as follows: *XXXXXXXXXXX# (the system recognises the symbol * as + ) 4. To confirm, select 1*1* The stored number is visible in the mobile app under Notifications, in the field Main phone. Other telephone numbers can be stored in the mobile app.

11 Engine blocking and PIN codes If engine blocking has been connected in the vehicle (optional), operation of engine can be blocked with telephone. Call the vehicle, wait for response and enter on the keyboard 666*. Hazard warning lights of the vehicle start blinking and engine blocking is applied. To release the blocking, enter on the keyboard 999* and enter PIN code from Pandora code card (4-digit number). 3 different PIN codes are used in Pandora: - Engine blocking release code - PIN code on password card - Guest PIN If owner s number has been stored, this code is asked when Pandora is called from another number. - Service PIN code Needed for entering programming mode. If vehicle SIM or telephone number is kept secret, it is not necessary to change the codes. Information about changing the codes is available in full manual of Pandora. SIM card in the vehicle or fixed costs GSM Alarm needs SIM card for operation. Initially the device includes Telia Super call card. Together with Pandora code card you will find in the vehicle plastic case for the call card, with reference number of telephone and charging. If you continue to use the call card, we recommend regular payments - 3 per month. Charging the call card: Contract can be concluded in a Telia branch for SIM card available in the vehicle, so that you need not to replace the SIM card physically. Using number transfer, you can use also the same number to subscribe to Tele2 or Elisa network. Data volume used by Pandora (GPS Tracking activated) is ~1MB/day. When you select data package (e.g. M2M), we recommend to order also the call service (in such case the device can call you in case of alarm, and it will be possible to control the device, also to change functions, with GSM commands or DTMF tones).

12 Other important information The user shall bear sole responsibility for remote start of engine of the vehicle. See also legislation of the local country. Republic of Estonia Traffic Act 13 (5) The motor of a vehicle standing or parked in a calm traffic area or residential area must not be left switched on for more than two minutes. GUARANTEE CERTIFICATE Installation company: Vehicle: Date: Comments: Guarantee period of the product is 2 years or based on the duration of main guarantee period of the vehicle, if purchased together with a new vehicle. Pandora dealer in Estonia: Artvali OÜ, Värvi 5 Tallinn Tel