Operating Instructions KSR-TF 611 with transistor output

Size: px
Start display at page:

Download "Operating Instructions KSR-TF 611 with transistor output"

Transcription

1 Operating Instructions KSR-TF 611 with transistor output

2 Contents Contents 1 About this document 1.1 Function Target group Symboism used For your safety 2.1 Authorised personne Appropriate use Warning about misuse Genera safety instructions CE conformity SIL conformity Safety instructions for Ex areas Product description 3.1 Configuration Principe of operation Operation Storage and transport Mounting 4.1 Genera instructions Mounting instructions Connecting to power suppy 5.1 Preparing the connection Connection procedure Wiring pan, singe chamber housing Set up 6.1 In genera Adjustment eements Function chart Maintenance and faut rectification 7.1 Maintenance Faut rectification Instrument repair Dismounting 8.1 Dismounting steps Disposa KSR-TF with transistor output

3 Contents 9 Suppement 9.1 Technica data Dimensions KSR-TF with transistor output 3

4 About this document 1 About this document 1.1 Function This operating instructions manua provides a the information you need for mounting, connection and setup as we as important instructions for maintenance and faut rectification. Pease read this information before putting the instrument into operation and keep this manua accessibe in the immediate vicinity of the device. 1.2 Target group This operating instructions manua is directed to trained personne. The contents of this manua shoud be made avaiabe to these personne and put into practice by them. 1.3 Symboism used Information, tip, note This symbo indicates hepfu additiona information. Caution: If this warning is ignored, fauts or mafunctions can resut. Warning: If this warning is ignored, injury to persons and/or serious damage to the instrument can resut. Danger: If this warning is ignored, serious injury to persons and/or destruction of the instrument can resut. Ex appications This symbo indicates specia instructions for Ex appications. à List The dot set in front indicates a ist with no impied sequence. Action This arrow indicates a singe action. 1 Sequence Numbers set in front indicate successive steps in a procedure. 4 KSR-TF with transistor output

5 For your safety 2 For your safety 2.1 Authorised personne A operations described in this operating instructions manua must be carried out ony by trained speciaist personne authorised by the operator. During work on and with the device the required persona protection equipment must aways be worn. 2.2 Appropriate use KSR-TF 611 is a sensor for eve detection. You can find detaied information on the appication range in chapter "Product description". 2.3 Warning about misuse Inappropriate or incorrect use of the instrument can give rise to appication-specific hazards, e.g. vesse overfi or damage to system components through incorrect mounting or adjustment. 2.4 Genera safety instructions This is a high-tech instrument requiring the strict observance of standard reguations and guideines. The user must take note of the safety instructions in this operating instructions manua, the country-specific instaation standards as we as a prevaiing safety reguations and accident prevention rues. The instrument must ony be operated in a technicay fawess and reiabe condition. The operator is responsibe for troubefree operation of the instrument. The user is aso obiged to determine, during the entire duration of use, the compiance of the necessary occupationa safety measures with the current vaid reguations and take note of new reguations. 2.5 CE conformity KSR-TF 611 is in CE conformity with EMC (89/336/EWG), fufis NAMUR recommendation NE 21 and is in CE conformity with LVD (73/23/EWG). Conformity has been judged according to the foowing standards: KSR-TF with transistor output 5

6 For your safety EMC: - Emission EN 61326/A1: 1998 (cass B) - Susceptibiity EN 61326: 1997/A1:1998 LVD: EN : SIL conformity KSR-TF 611 fufis the requirements to functiona safety according to IEC or IEC You find further information in the Safety Manua. 2.7 Safety instructions for Ex areas Pease note the Ex-specific safety information for instaation and operation in Ex areas. These safety instructions are part of the operating instructions manua and come with the Exapproved instruments. 6 KSR-TF with transistor output

7 Product description 3 Product description 3.1 Configuration Scope of deivery Components The scope of deivery encompasses: KSR-TF 611 eve sensor Documentation - this operating instructions manua - Additiona instructions manua "Safety Manua - Functiona safety according to IEC (SIL)" - Ex-specific "Safety instructions" (with Ex-versions) - if necessary, further certificates KSR-TF 611 consists of the foowing components: Housing cover Housing with eectronics process fitting with tuning fork Fig. 1: KSR-TF Housing cover 2 Housing with eectronics 3 Process fitting 3.2 Principe of operation Area of appication KSR-TF 611 is a eve sensor with tuning fork for eve detection. It is designed for industria use in a areas of process technoogy and can be used in iquids. Typica appications are overfi and dry run protection. With a tuning fork of ony 40 mm ength, KSR-TF 611 can be aso mounted, e.g. in pipeines from DN 25. The sma tuning fork KSR-TF with transistor output 7

8 Product description aows use in vesses, tanks and pipes. Thanks to its simpe and robust measuring system, KSR-TF 611 is virtuay unaffected by the chemica and physica properties of the iquid. It functions even under difficut conditions such as turbuence, air bubbes, foam generation, buidup, strong externa vibration or changing products. Faut monitoring The eectronics modue of KSR-TF 611 continuousy monitors via frequency evauation the foowing criteria: Strong corrosion or damage on the tuning fork oss of vibration Line break to the piezo drive If a mafunction is detected or in case of power faiure, the eectronics takes on a defined switching condition, i.e. the output transistor bocks (safe condition). Functiona principe Suppy The tuning fork is piezoeectricay energised and vibrates at its mechanica resonance frequency of approx Hz. The piezos are fixed mechanicay and are hence not subject to temperature shock imitations. The frequency changes when the tuning fork is covered by the medium. This change is detected by the integrated osciator and converted into a switching command. KSR-TF 611 is a compact instrument, i.e. it can be operated without externa evauation system. The integrated eectronics evauates the eve signa and outputs a switching signa. With this switching signa, a connected device can be operated directy (e.g. a warning system, a PLC, a pump etc.). The data for power suppy are stated in chapter "Technica data" in the "Suppement". 3.3 Operation With the factory setting, products with a density >0.07 g/cm³ (>0.025 bs/in³) can be measured. The instrument can be adapted if products with ower density shoud be measured. On the eectronics modue you wi find the foowing indicating and adjustment eements: signa amp for indication of the switching condition (green/ red) DIL switch for sensitivity adjustment 8 KSR-TF with transistor output

9 Product description Mode switch for seection of the switching condition (A/B) 3.4 Storage and transport Packaging Storage and transport temperature Your instrument was protected by packaging during transport. Its capacity to hande norma oads during transport is assured by a test according to DIN EN The packaging of standard instruments consists of environment-friendy, recycabe cardboard. In addition, the sensor is provided with a protective cover of ABS. For specia versions PE foam or PE foi is aso used. Dispose of the packaging materia via speciaised recycing companies. Storage and transport temperature see "Suppement - Technica data - Ambient conditions" Reative humidity % KSR-TF with transistor output 9

10 Mounting 4 Mounting 4.1 Genera instructions Switching point In genera, KSR-TF 611 can be mounted in any position. The instrument must be mounted in such a way that the tuning fork is at the height of the requested switching point. The tuning fork has atera markings (notches) that indicate the switching point with vertica mounting. The switching point refers to water with the basic setting of the sensitivity switch 0.7 g/cm³ (0.025 bs/in³). When mounting KSR-TF 611, make sure that this marking is at the height of the requested switching point. Keep in mind that the switching point of the instrument is shifted if the medium has a density other than water - water 1 g/cm³ (0.036 bs/in³). For products <0.7 g/cm³ (0.025 bs/in³) and >0.5 g/cm³ (0.018 bs/in³) the density switch must be set to 0.5 g/cm³. Keep in mind that foams with a density >0.45 g/cm³ (0.016 bs/ in³) are detected by the sensor. This can cause fauty switchings particuary when used as dry run protection system Fig. 2: Vertica mounting 1 Switching point approx. 13 mm (0.51 in) 2 Switching point with ower density 3 Switching point with higher density 4 Switching point approx. 27 mm (1.06 in) 10 KSR-TF with transistor output

11 Mounting 1 Fig. 3: Horizonta mounting 1 Switching point 1 2 Fig. 4: Vertica instaation (recommended instaation position, especiay for adhesive products) 1 Switching point 2 Marking with screwed version on top, with fange versions directed to the fange hoes With fange versions, the fork is directed as foows to the fange hoes. Fig. 5: Fork position with fange versions Moisture Use the recommended cabes (see chapter "Connecting to power suppy") and tighten the cabe gand. You can give your KSR-TF 611 additiona protection against moisture penetration by eading the connection cabe downward in front of the cabe entry. Rain and condensation water KSR-TF with transistor output 11

12 Mounting can thus drain off. This appies mainy to mounting outdoors, in areas where moisture is expected (e.g. by ceaning processes) or on cooed or heated vesses. Fig. 6: Measures against moisture penetration Transport Pressure/Vacuum Handing Do not hod KSR-TF 611 on the tuning fork. Particuary with fange or tube versions, the tuning fork can be damaged just by the weight of the instrument. Transport coated instruments very carefuy and avoid touching the tuning fork. Remove the protective cover just before mounting. The process fitting must be seaed if there is gauge or ow pressure in the vesse. Before use, check if the sea materia is resistant against the measured product and the process temperature. The max. permissibe pressure is stated in chapter "Technica data" in the "Suppement" or on the type abe of the sensor. The vibrating eve switch is a measuring instrument and must be treated accordingy. Bending the vibrating eement wi destroy the instrument. Warning: The housing must not be used to screw the instrument in! Appying tightening force on the housing can damage its rotationa mechanica parts. To screw in, use the hexagon above the thread. 12 KSR-TF with transistor output

13 Mounting 4.2 Mounting instructions Weded socket KSR-TF 611 has a defined thread starting point. This means that every KSR-TF 611 is in the same fork position after being screwed in. Remove therefore the suppied sea from the thread of KSR-TF 611. This sea is not required when using a weded socket with O-ring in front. Keep in mind that this weded socket is not suitabe for coated instrument versions. Screw KSR-TF 611 competey into the weded socket. The ater position can be determined aready before weding. Mark the appropriate position of the weded socket. Before weding, unscrew KSR-TF 611 and remove the rubber ring from the weded socket. The weded socket has a marking (notch). Wed the socket with the notch facing upward, or in case of pipeines, aigned with the direction of fow. 1 Fig. 7: Marking on the weded socket 1 Marking Adhesive products In case of horizonta mounting in adhesive and viscous products, the surfaces of the tuning fork shoud be vertica in order to reduce buidup on the tuning fork. On the screwed version you wi find a marking on the hexagon. With this, you can check the position of the tuning fork when screwing it in. When the hexagon touches the sea, the thread can sti be turned by approx. haf a turn. This is sufficient to reach the recommended instaation position. With fange versions, the fork is directed to the fange hoes. When used in adhesive and viscous products, the tuning fork shoud protrude into the vesse to avoid buidup. For that reason, sockets for fanges and mounting bosses shoud be avoided when mounting horizontay. KSR-TF with transistor output 13

14 Mounting Infowing medium Fows If KSR-TF 611 is mounted in the fiing stream, unwanted mismeasurements may resut. Mount KSR-TF 611 at a ocation in the vesse where no disturbing infuence from e.g. fiing openings, agitators, etc. can occur. To minimise fow resistance caused by the tuning fork, KSR-TF 611 shoud be mounted in such a way that the surfaces of the bades are parae to the product movement. 14 KSR-TF with transistor output

15 Connecting to power suppy 5 Connecting to power suppy 5.1 Preparing the connection Note safety instructions Take note of safety instructions for Ex appications Aways keep in mind the foowing safety instructions: Connect ony in the compete absence of ine votage In hazardous areas you shoud take note of the appropriate reguations, conformity and type approva certificates of the sensors and power suppy units. Seect power suppy Seecting connection cabe Connect the power suppy according to the foowing diagrams. Take note of the genera instaation reguations. As a rue, connect KSR-TF 611 to vesse ground (PA), or in case of pastic vesses, to the next ground potentia. On the side of the instrument housing there is a ground termina between the cabe entries. This connection serves to drain off eectrostatic charges. In Ex appications, the instaation reguations for hazardous areas must be given priority. The data for power suppy are stated in chapter "Technica data" in the "Suppement". KSR-TF 611 is connected with standard cabe with round cross section. An outer cabe diameter of 5 9 mm ( in) ensures the sea effect of the cabe gand. If cabe with a different diameter or wire cross section is used, exchange the sea or use an appropriate cabe connection. In hazardous areas, ony use approved cabe connections for KSR-TF 611. Seect connection cabe for Ex appications Take note of the corresponding instaation reguations for Ex appications. 5.2 Connection procedure With Ex instruments, the housing cover may ony be opened if there is no exposive atmosphere present. Proceed as foows: 1 Unscrew the housing cover 2 Loosen compression nut of the cabe entry KSR-TF with transistor output 15

16 Connecting to power suppy 3 Remove approx. 10 cm (4 in) of the cabe mante, strip approx. 1 cm (0.4 in) insuation from the ends of the individua wires 4 Insert the cabe into the sensor through the cabe entry 5 Open the terminas with a screwdriver 6 Insert the wire ends into the open terminas according to the wiring pan 7 Tighten the terminas with a screwdriver 8 Check the hod of the wires in the terminas by ighty puing on them 9 Tighten the compression nut of the cabe entry. The sea ring must competey encirce the cabe 10 Screw the housing cover back on The eectrica connection is finished. 5.3 Wiring pan, singe chamber housing The foowing iustrations appy to the non-ex as we as to the EEx d version. Housing overview Fig. 8: Materia versions, singe chamber housing 1 Auminium 2 Stainess stee 3 Fiter eement for pressure compensation 16 KSR-TF with transistor output

17 Connecting to power suppy Eectronics and connection compartment + SW E60T PNP NPN V DC out m ax 4 00mA A 0,5 g / cm B 0,7 g / cm Fig. 9: Eectronics and connection compartment, singe chamber housing 1 Contro amp 2 DIL switch for mode adjustment 3 DIL switch for switching point adaptation 4 Ground termina 5 Screwed terminas Wiring pan We recommend connecting KSR-TF 611 in such a way that the switching circuit is open when there is a eve signa, ine break or faiure (safe condition). The instrument is used to contro reays, contactors, magnet vaves, warning ights, horns as we as PLC inputs Fig. 10: NPN action KSR-TF with transistor output 17

18 Connecting to power suppy Fig. 11: PNP action 18 KSR-TF with transistor output

19 Set up 6 Set up 6.1 In genera The numbers in brackets refer to the foowing iustrations. Function/Configuration In the basic setting, products with a density >0.7 g/cm³ (0.025 bs/in³) can be detected. For products with ower density, you have to set the switch to >0.5 g/cm³ (0.018 bs/ in³). On the eectronics modue you wi find the foowing indicating and adjustment eements: Signa amp (1) DIL switch for mode adjustment - A/B (2) DIL switch for sensitivity adjustment (3) Note: For test purposes, immerse the tuning fork of KSR-TF 611 aways in iquids. Do not test the function of KSR-TF 611 with the hand. This can damage the sensor. 6.2 Adjustment eements Fig. 12: Osciator SWE60T - Transistor output 1 Signa amp (LED) 2 DIL switch for mode adjustment 3 DIL switch for sensitivity adjustment KSR-TF with transistor output 19

20 Set up Signa amp (1) Mode adjustment (2) Sensitivity adjustment (3) Contro amp (LED) for indication of the switching status. green = output conducts red = output bocks red (fashing) = faiure With the mode adjustment (A/B) you can change the switching condition of the reay. You can set the required mode according to the "Function chart" (A - max. detection or overfi protection, B - min. detection or dry run protection). With this DIL switch (3) you can set the switching point to iquids having a density between 0.5 and 0.7 g/cm³ (0.018 and bs/in³). With the basic setting, iquids with a density of >0.7 g/cm³ (0.025 bs/in³) can be detected. In iquids with ower density, you must set the switch to >0.5 g/cm³ (0.018 bs/in³). The specifications for the position of the switching point reate to water - density vaue 1 g/cm³ (0.036 bs/in³). In products with a different density, the switching point wi shift in the direction of the housing or tuning fork end depending on the density and type of instaation. Keep in mind that foams with a density >0.45 g/cm³ (0.016 bs/ in³) are detected by the sensor. This can cause fauty switchings particuary when used as dry run protection system. 6.3 Function chart The foowing chart provides an overview of the switching conditions depending on the adjusted mode and eve. Mode A Overfow protection Leve Switching status Contro amp transistor conducts Mode A Overfow protection transistor bocks Green Mode B Dry run protection transistor conducts Red Green 20 KSR-TF with transistor output

21 Set up Mode B Dry run protection Leve Switching status Contro amp transistor bocks Faiure of the suppy votage (mode A/B) any transistor bocks Red Faiure any transistor bocks fashes red KSR-TF with transistor output 21

22 Maintenance and faut rectification 7 Maintenance and faut rectification 7.1 Maintenance When used as directed in norma operation, KSR-TF 611 is competey maintenance free. 7.2 Faut rectification Causes of mafunction Faut cearance KSR-TF 611 offers maximum reiabiity. Nevertheess fauts can occur during operation. These may be caused by the foowing, e.g.: Sensor Process Suppy Signa processing The first measure to be taken is to check the output signa. In many cases, the causes can be determined this way and the fauts rectified. Checking the switching signa? KSR-TF 611 signas "covered" when the vibrating eement is not submerged (overfi protection)? KSR-TF 611 signas "uncovered" when the vibrating eement is submerged (dry run protection) Suppy votage too ow à Check the power suppy Eectronics modue defective à Press the mode switch (min./max.). If the instrument then changes the mode, the instrument may be mechanicay damaged. Shoud the switching function in the correct mode sti be fauty, return the instrument for repair. à Push the mode switch. If the instrument then does not change the mode, the osciator may be defective. Exchange the osciator. à Check if there is buidup on the vibrating eement, and if so, remove it. Unfavourabe instaation ocation à Mount the instrument at a ocation in the vesse where no dead zones or air bubbes can form. 22 KSR-TF with transistor output

23 Maintenance and faut rectification Wrong mode seected à Set the correct mode on the mode switch (max.: overfi protection, min.: dry run protection). Wiring shoud be carried out according to the quiescent current principe.? Signa amp fashes red Eectronics has detected a faiure à Exchange instrument or return instrument for repair? The signa amp fashes aternatey red and green instrument defective à Exchange instrument or return instrument for repair 7.3 Instrument repair If a repair is necessary, pease proceed as foows: Cean the instrument and pack it damage-proof Attach a description of the faut, the ambient conditions and measured product to the instrument If necessary, attach a safety sheet to the instrument Send the instrument to the address of the agency serving you, in Germany directy to the headquarters KSR-TF with transistor output 23

24 Dismounting 8 Dismounting 8.1 Dismounting steps Warning: Before dismounting, be aware of dangerous process conditions such as e.g. pressure in the vesse, high temperatures, corrosive or toxic products etc. Take note of chapters "Mounting" and "Connecting to power suppy" and carry out the isted steps in reverse order. With Ex instruments, the housing cover may ony be opened if there is no exposive atmosphere present. 8.2 Disposa The instrument consists of materias which can be recyced by speciaised recycing companies. We use recycabe materias and have designed the eectronics to be easiy separabe. WEEE directive 2002/96/EG This instrument is not subject to the WEEE directive 2002/96/ EG and the respective nationa aws (in Germany, e.g. EektroG). Pass the instrument directy on to a speciaised recycing company and do not use the municipa coecting points. These may be used ony for privatey used products according to the WEEE directive. Correct disposa avoids negative effects to persons and environment and ensures recycing of usefu raw materias. Materias: see chapter "Technica data" If you cannot dispose of the instrument propery, pease contact us about disposa methods or return. 24 KSR-TF with transistor output

25 Suppement 9 Suppement 9.1 Technica data Genera data Materia 316L corresponds to or Materias, wetted parts - Process fitting - thread 316L, Hasteoy C4 (2.4602) - Process fitting - fange 316L, 316L with Hasteoy C4 pated, 316L with ECTFE coated, 316L with PFA coated - Process sea Kingersi C-4400 (with threaded versions) - Tuning fork 316L, Hasteoy C4 (2.4610) - Extension tube ø 21.3 mm (0.84 in) 316L, Hasteoy C4 (2.4610), 316L with ECTFE coating, 316L with PFA coating Sensor ength - ength KSR-TF 611 See chapter "Suppement - Dimensions" Materias, non-wetted parts - Housing Auminium die-casting powder coated, 316L - Sea between housing and housing cover - Ground termina 316L - Temperature adapter (optiona) 316L - Gas-tight eadthrough (optiona) 316L/gass Weights - Auminium housing 1170 g (41 oz) - Stainess stee housing 1530 g (54 oz) NBR (stainess stee housing), siicone (Auminium housing) Layer thickness - coatings - ECTFE approx. 0.5 mm (0.02 in) - PFA approx. 0.5 mm (0.02 in) Surface quaity - Standard R a approx. 3 µm ( in) - hygienic version (3A) R a <0.8 µm ( in) - hygienic version (3A) R a <0.3 µm ( in) KSR-TF with transistor output 25

26 Suppement Process fittings - Thread G¾ A, ¾ NPT, G1 A, 1 NPT - Fanges DIN from DN 25, ANSI from 1" - hygienic fittings Boting DN 40 PN 40, Tri-Camp 1", Tri-Camp 1½" PN 10, conus DN 25 PN 40, Tuchenhagen Varivent DN 50 PN 10 Gas-tight eadthrough (optiona) - eakage rate <10-6 mbar /s - Pressure resistance PN 64 - hygienic fittings Boting DN 40 PN 40, Tri-Camp 1", Tri-Camp 1½" PN 10, conus DN 25 PN 40, Tuchenhagen Varivent DN 50 PN 10 Output variabe Output Load current Votage oss Turn-on votage foating transistor output, overoad and permanenty shortcircuit proof max. 400 ma max. 1 V max. 55 V DC Bocking current <10 µa Modes (adjustabe) - A Max. detection or overfow/overfi protection - B Min. detection or dry run protection Measuring accuracy Deviation ±1 mm (±0.04 in) Infuence of the process temperature on the switching point 26 KSR-TF with transistor output

27 Suppement ( 25/64") 8 ( 5/16") 3 6 ( 15/64") 4 ( 5/32") 2 ( 5/64") 0-2 (-5/64") -4 (-5/32") 2-6 (-15/64") -8 (-5/16") -10 (-25/64") 0 C (32 F) 50 C (122 F) 100 C (212 F) 150 C (302 F) 200 C (392 F) 250 C (482 F) Fig. 21: Infuence of the process temperature on the switching point 1 Shifting of the switching point in mm (in) 2 Process temperature in C ( F) 3 Switching point at reference conditions (notch) 4 Tuning fork Infuence of the product density on the switching point KSR-TF with transistor output 27

28 Suppement ( 25/64") 8 ( 5/16") 6 ( 15/64") 4 ( 5/32") 5 2 ( 5/64") 0-2 (-5/64") -4 (-5/32") -6 (-15/64") (-5/16") -10 (-25/64") 0,6 (0,022) 0,8 (0,029) 1 (0,036) 1,2 (0,043) 1,4 (0,051) 1,6 (0,058) 1,8 (0,065) 2 (0,072) 2,2 (0,079) 2,4 (0,087) Fig. 22: Infuence of the product density on the switching point 1 Shifting of the switching point in mm (in) 2 Product density in g/cm³ (b/in³) 3 Switch position 0.5 g/cm³ (corresponds to b/in³) 4 Switch position 0.7 g/cm³ (corresponds to b/in³) 5 Switching point at reference conditions (notch) 6 Tuning fork Infuence of the process pressure to the switching point 28 KSR-TF with transistor output

29 Suppement ( 25/64") 8 ( 5/16") 3 6 ( 15/64") 4 ( 5/32") 2 ( 5/64") 0-2 (-5/64") -4 (-5/32") 2-6 (-15/64") -8 (-5/16") -10 (-25/64") 12 (174,1) 25 (362,6) 38 (551,1) 51 (739,7) 64 (928,2) Fig. 23: Infuence of the process pressure to the switching point 1 Shifting of the switching point in mm (in) 2 Process pressure in bar (psi) 3 Switching point at reference conditions (notch) 4 Tuning fork Repeatabiity Hysteresis Switching deay Frequency Ambient conditions Ambient temperature on the housing Storage and transport temperature 0.1 mm (0.004 in) approx. 2 mm (0.08 in) with vertica instaation approx. 500 ms (on/off) approx Hz C ( F) C ( F) Process conditions Parameter Process pressure KSR-TF 611 of 316L/Hasteoy C4 (2.4610) Limit eve of iquids bar ( psi) depending on the process fitting, e.g. fange (see foowing diagrams) C ( F) KSR-TF with transistor output 29

30 Suppement Process temperature (thread or fange temperature) with temperature adapter (option) - KSR-TF 611 of 316L/Hasteoy C C ( F) - KSR-TF 611 with ECTFE coating C ( F) - KSR-TF 611 with PFA coating C ( F) 2 70 C (158 F) 3 40 C (104 F) 0 C (32 F) -50 C (-58 F) -40 C (-40 F) 50 C (122 F) 100 C (212 F) 150 C (302 F) 200 C (392 F) C (482 F) Fig. 24: Ambient temperature - Process temperature 1 Process temperature in C ( F) 2 Ambient temperature in C ( F) 3 Temperature range with temperature adapter 1 64 (928) 40 (580) 20 (290) -50 C (-58 F) -1 (-14,5) 0 C (32 F) 50 C (122 F) 100 C (212 F) 150 C (302 F) 200 C (392 F) 250 C (482 F) 2 Fig. 25: Process temperature - Process pressure with switch position 0.7 g/cm³ (mode switch) 1 Process pressure in bar (psi) 2 Process temperature in C ( F) 30 KSR-TF with transistor output

31 Suppement 1 64 (928) 40 (580) 20 (290) -50 C (-58 F) -1 (-14,5) 0 C (32 F) 50 C (122 F) 100 C (212 F) 150 C (302 F) 200 C (392 F) 250 C (482 F) 2 Fig. 26: Process temperature - Process pressure with switch position 0.5 g/cm³ (mode switch) 1 Process pressure in bar (psi) 2 Process temperature in C ( F) Viscosity - dynamic Density ,000 mpa s (requirement: with density 1) g/cm³ ( bs/in³); g/cm³ ( bs/in³) by switching over Eectromechanica data Cabe entry/pug 1) - Singe chamber housing 1x cabe entry M20x1.5 (cabe-ø 5 9 mm), 1x bind stopper M20x1.5 or: 1x cosing cap ½ NPT, 1x bind pug ½ NPT Screw terminas Adjustment eements or: 1x pug (depending on the version), 1x bind pug M20x1.5 for wire cross-section up to 1.5 mm² ( in²) Mode switch - A Max. detection or overfow/overfi protection - B Min. detection or dry run protection 1) Depending on the version M12x1, according to DIN 43650, Harting, Ampheno-Tuche, 7/8" FF. KSR-TF with transistor output 31

32 Suppement Density switch g/cm³ ( oz/in³) g/cm³ ( oz/in³) Votage suppy Suppy votage Power consumption V DC max. 0.5 W Eectrica protective measures Protection IP 66/IP 67 Overvotage category Protection cass Functiona safety (SIL) Functiona safety according to IEC 61508/IEC Singe channe architecture (1oo1 up to SIL2 D) III II - Mutipe channe architecture see suppementary instructions manua "Safety Manua (SIL)" Approvas 2) Overfi protection according to WHG ATEX II 1G 1/2G, 2G EEx ia IIC T6 ATEX II 1/2G, 2G EEx d IIC T6 3) FM (NI) CL I, DIV 2, GP ABCD FM (XP) CL I, DIV 1, GP ABCD (DIP) CL II, III, DIV 1, GP EFG 4) Ship approvas 2) Deviating data in Ex appications: see separate safety instructions. 3) Ony with Auminium housing. 4) Ony with Auminium housing. 32 KSR-TF with transistor output

33 Suppement 9.2 Dimensions KSR-TF mm (2 23/ 32") ø77mm (3 1/ 32") 116mm (4 9/ 16") ø84mm (3 5/ 16") M20x1,5/ ½ NPT 117mm (4 39/64") M20x1,5/ ½ NPT 116mm (4 9/16") M20x1,5 1 2 Fig. 27: Housing versions 1 Stainess stee housing 2 Auminium housing KSR-TF with transistor output 33

34 Suppement KSR-TF ,5 mm (47/64") 66 mm (2 23/32") 32 (G3/ 4 A, 3/ 4 "NPT) 41 (G1A, 1"NPT) G3/ 4 A, 3/ 4 "NPT G1A, 1"NPT 36 mm (1 27/64") 53 mm (2 3/32") 57 mm (2 1/4") 55 mm (2 11/64") mm (1 31/32") ø 33,7 mm (1 21/ 64 ") 19 mm (3/4") 34 mm (1 11/32") mm (7 1/64") 7 53 mm (2 3/32") 53 mm (2 3/32") 4 5 Fig. 28: KSR-TF Thread 2 Tri-Camp 3 Cone DN 25 4 Boting DN 40 5 Fange 6 Gas-tight eadthrough 7 Temperature adapter 34 KSR-TF with transistor output

35 Suppement KSR-TF with transistor output 35

36 KSR KUEBLER Niveau-Messtechnik AG Im Kohstatterfed Zwingenberg Germany Phone Fax E-mai: A statements concerning scope of deivery, appication, practica use and operating conditions of the sensors and processing systems correspond to the information avaiabe at the time of printing. Subject to change without prior notice

Operating Instructions KSR-TF 633 with transistor output

Operating Instructions KSR-TF 633 with transistor output Operating Instructions KSR-TF 633 with transistor output Contents Contents 1 About this document 1.1 Function............................. 4 1.2 Target group.......................... 4 1.3 Symboism used.......................

More information

Operating Instructions OPTISWITCH 3100 C with transistor output

Operating Instructions OPTISWITCH 3100 C with transistor output Operating Instructions OPTISWITCH 3100 C with transistor output Contents Contents 1 About this document 1.1 Function... 4 1.2 Target group... 4 1.3 Symboism used... 4 2 For your safety 2.1 Authorised personne...

More information

Operating Instructions OPTISWITCH 3100 C with contactless electronic switch

Operating Instructions OPTISWITCH 3100 C with contactless electronic switch Operating Instructions OPTISWITCH 3100 C with contactess eectronic switch Contents Contents 1 About this document 1.1 Function... 4 1.2 Target group... 4 1.3 Symboism used... 4 2 For your safety 2.1 Authorised

More information

Operating Instructions OPTISWITCH 5100 C, 5150 C with transistor output

Operating Instructions OPTISWITCH 5100 C, 5150 C with transistor output Operating Instructions OPTISWITCH 5100 C, 5150 C with transistor output Contents Contents 1 About this document 1.1 Function... 4 1.2 Target group... 4 1.3 Symboism used... 4 2 For your safety 2.1 Authorised

More information

Operating Instructions VEGASWING 63 - transistor (NPN/PNP)

Operating Instructions VEGASWING 63 - transistor (NPN/PNP) Operating Instructions VEGASWING 63 - transistor (NPN/PNP) Vibration Contents Contents 1 About this document 1.1 Function............................. 5 1.2 Target group.......................... 5 1.3

More information

Operating Instructions OPTISWITCH 5200 C, 5250 C with NAMUR output

Operating Instructions OPTISWITCH 5200 C, 5250 C with NAMUR output Operating Instructions OPTISWITCH 5200 C, 5250 C with NAMUR output Contents Contents 1 About this document 1.1 Function... 4 1.2 Target group... 4 1.3 Symboism used... 4 2 For your safety 2.1 Authorised

More information

Operating Instructions VEGASWING 63 - double relay (DPDT)

Operating Instructions VEGASWING 63 - double relay (DPDT) Operating Instructions VEGASWING 63 - doube reay (DPDT) Vibration Contents Contents 1 About this document 1.1 Function............................. 5 1.2 Target group.......................... 5 1.3 Symboism

More information

Operating Instructions OPTISWITCH 3100 C with contactless electronic switch

Operating Instructions OPTISWITCH 3100 C with contactless electronic switch Operating Instructions OPTISWITCH 3100 C with contactess eectronic switch Contents Contents 1 About this document 1.1 Function... 5 1.2 Target group... 5 1.3 Symboism used... 5 2 For your safety 2.1 Authorised

More information

Instruction Manual September 2010 SITRANS LVL200S

Instruction Manual September 2010 SITRANS LVL200S Instruction Manual September 2010 SITRANS LVL200S Contents Contents 1 About this document 1.1 Function.................................. 4 1.2 Target group.............................. 4 1.3 Symbolism

More information

Instruction Manual September 2010 SITRANS LVL200S

Instruction Manual September 2010 SITRANS LVL200S Instruction Manual September 2010 SITRANS LVL200S Contents Contents 1 About this document 1.1 Function.................................. 4 1.2 Target group.............................. 4 1.3 Symbolism

More information

DC Disconnect with remote control and arc fault detection PVREM-...-AF1

DC Disconnect with remote control and arc fault detection PVREM-...-AF1 DC Disconnect with remote contro and arc faut detection PVRE-...-1 Description The powerfu DC Disconnect PVRE-...-1 on a hybrid basis aows disconnection of the DC side of a photovotaic system in proximity

More information

Vibrating Switches SITRANS LVL200S TRANSISTOR (NPN/PNP) Operating Instructions 11/2016. Siemens Contro

Vibrating Switches SITRANS LVL200S TRANSISTOR (NPN/PNP) Operating Instructions 11/2016. Siemens Contro Siemens Contro Vibrating Switches SITRANS LVL200S TRANSISTOR (NPN/PNP) Operating Instructions 11/2016 2 SITRANS LVL200S - Operating Instructions Contents 1 About this document 1.1 Function... 5 1.2 Target

More information

Operating Instructions 11/2016

Operating Instructions 11/2016 Vibrating Switches SITRANS LVL200E TRANSISTOR (NPN/PNP) Operating Instructions 11/2016 2 SITRANS LVL200E - Operating Instructions Contents 1 About this document 1.1 Function... 5 1.2 Target group... 5

More information

Operating Instructions 11/2016

Operating Instructions 11/2016 Vibrating Switches SITRANS LVL200S NAMUR Operating Instructions 11/2016 2 SITRANS LVL200S - Operating Instructions Contents 1 About this document 1.1 Function... 5 1.2 Target group... 5 1.3 Symbols used...

More information

Operating Instructions Indicating and adjustment module PLICSCOM

Operating Instructions Indicating and adjustment module PLICSCOM Operating Instructions Indicating and adjustment modue PLICSCOM Contents Contents 1 About this document 1.1 Function... 4 1.2 Target group... 4 1.3 Symboism used... 4 2 For your safety 2.1 Authorised personne...

More information

ELECTRIC UNDERFLOOR HEATING

ELECTRIC UNDERFLOOR HEATING MYSON MYSON MYSON Eastern Avenue, Team Vaey, Gateshead, Tyne & Wear NE11 0PG, UK T: 0845 402 3434, F: 0191 491 7568, saes@myson.co.uk, www.myson.co.uk ELECTRIC UNDERFLOOR HEATING INSTALLATION MANUAL PLEASE

More information

Operating Instructions VEGASWING 63. Vibrating level switch with tube extension for liquids. - two-wire. Document ID: 29232

Operating Instructions VEGASWING 63. Vibrating level switch with tube extension for liquids. - two-wire. Document ID: 29232 Operating Instructions Vibrating level switch with tube extension for liquids VEGASWING 63 - two-wire Document ID: 29232 2 Contents Contents 1 About this document 1.1 Function... 4 1.2 Target group...

More information

MYSON ELECTRIC UNDERFLOOR HEATING. INSTALLATION MANUAL. heatingthroughinnovation. APRIL 2013

MYSON ELECTRIC UNDERFLOOR HEATING. INSTALLATION MANUAL. heatingthroughinnovation. APRIL 2013 MYSON ELECTRIC UNDERFLOOR HEATING. INSTALLATION MANUAL APRIL 2013 Important: Pease read carefuy on receipt of product and keep in a safe pace. heatingthroughinnovation. Contents 1.0 Genera Information

More information

Thermo shaker PHMP/ PHMP-4

Thermo shaker PHMP/ PHMP-4 Thermo shaker PHMP/ PHMP-4 For version V.2GW Contents 1 Safety...3 2 Genera Information...5 3 Getting Started...6 4 Operation of PHMP/PHMP-4...7 5 Specifications...9 6 Guarantee and service...10 Version

More information

SKYSTAR water cassette Main components:

SKYSTAR water cassette Main components: Innovative and fascinating design, six different modes, high contro fexibiity, ease of maintenance: the new SKYSTR water cassette is the resut of significant technica and design research focused on providing

More information

Operating Instructions 11/2016

Operating Instructions 11/2016 Vibrating Switches SITRANS LVL200S RELAY (DPDT) Operating Instructions 11/2016 2 SITRANS LVL200S - Operating Instructions Contents 1 About this document 1.1 Function... 5 1.2 Target group... 5 1.3 Symbols

More information

Thermo shaker PHMP/ PHMP-4

Thermo shaker PHMP/ PHMP-4 Thermo shaker PHMP/ PHMP-4 For versions V.5GW (PHMP) V.3GW (PHMP-4) Contents 1 Safety...3 2 Genera Information...5 3 Getting Started...6 4 Operation of PHMP/PHMP-4...7 5 Specifications...9 6 Guarantee

More information

General terms and conditions... F-7 Glossary of terms... P.1455~ panasonic.net/id/pidsx/global

General terms and conditions... F-7 Glossary of terms... P.1455~ panasonic.net/id/pidsx/global 383 PHOTO PHOTO MEASURE ITY Robust Photoeectric SERIES Reated Information Genera terms and conditions... F-7 Gossary of terms... P.55~ panasonic.net/id/pidsx/goba seection guide... P.7~ Genera precautions...

More information

Operating Instructions 11/2016

Operating Instructions 11/2016 Vibrating Switches SITRANS LVL200E RELAY (DPDT) Operating Instructions 11/2016 2 SITRANS LVL200E - Operating Instructions Contents 1 About this document 1.1 Function... 5 1.2 Target group... 5 1.3 Symbols

More information

ORDER GUIDE. 5 m ft cable length type. Accessories. Robust Photoelectric Sensor RX SERIES

ORDER GUIDE. 5 m ft cable length type. Accessories. Robust Photoelectric Sensor RX SERIES 39 PHOTO PHOTO IGHT FOW PARTICUAR SIMPE MEASURE CONTRO PC SOUTIONS Seection Ampifier Power Suppy Ampifierseparated CX- CY- EX- EX- EX-3 EX- CX- EQ-3 EQ-5 -S RT-6 Robust Photoeectric SERIES Reated Information

More information

Dynacon Eclipse. Floor Heating Manifolds Floor heating manifold with automatic flow control

Dynacon Eclipse. Floor Heating Manifolds Floor heating manifold with automatic flow control Dynacon Ecipse Foor Heating Manifods Foor heating manifod with automatic fow contro IMI HEIMEIER / Foor Heating Contro / Dynacon Ecipse Dynacon Ecipse Dynacon Ecipse adjusts the fow rate in the individua

More information

Electrorad Digi-Line. Installation, Operating & Instruction Manual. After Sales Service:

Electrorad Digi-Line. Installation, Operating & Instruction Manual. After Sales Service: ELECTRORAD UK LTD Unit 1, Cayton Park, Cayton Wood Rise, West Park, Leeds, LS16 6RF T: 0844 479 0055, info@eectrorad.co.uk, www.eectrorad.co.uk Eectrorad Digi-Line Instaation, Operating & Instruction Manua

More information

OPTISWITCH 5300 C. Handbook. Vibrating Level Switch. - two-wire With SIL qualification

OPTISWITCH 5300 C. Handbook. Vibrating Level Switch. - two-wire With SIL qualification OPTISWITCH 5300 C Handbook Vibrating Level Switch - two-wire With SIL qualification 2 Contents Contents 1 About this document 1.1 Function... 3 1.2 Target group... 3 1.3 Symbols used... 3 2 For your safety

More information

Ceramic insulated band heaters

Ceramic insulated band heaters ... Infinite soutions... Ceramic insuated band heaters MODEL Z.41 (CERAMIC) Ceramic insuated band heaters Mode Z.41 ceramic Technica features Use Pasticization cyinders for injection moding machines or

More information

Mica insulated band heaters

Mica insulated band heaters ... Infinite soutions... Mica insuated band heaters MODEL Z.32 (MICA) Mica insuated band heaters Mode Z.32 mica Technica features Use Pasticization cyinders for injection moding machines or extruders Mica

More information

HAZARDOUS AREA. The very best in high pressure water jetting systems SURFACE PREPARATION/ COATING REMOVAL PIPE CLEANING HEAT EXCHANGER CLEANING

HAZARDOUS AREA. The very best in high pressure water jetting systems SURFACE PREPARATION/ COATING REMOVAL PIPE CLEANING HEAT EXCHANGER CLEANING I N N O V A T I O N T H R O U G H E X P E R I E N C E HAZARDOUS AREA SURFACE PREPARATION/ COATING REMOVAL PIPE CLEANING HEAT EXCHANGER CLEANING TANK/VESSEL CLEANING MARINE GROWTH REMOVAL ABRASIVE CUTTING

More information

Think FATI for Hot Solutions

Think FATI for Hot Solutions Think FATI for Hot Soutions COMPANY PROFILE F.A.T.I. (Fabbrica Apparecchiature Termoeettriche Industriai) founded in 1945 at Mian - Itay, quicky estabished itsef as an industry eader in the fied of Heating

More information

Globo H. Ball valves Gunmetal ball valve

Globo H. Ball valves Gunmetal ball valve Gobo Ba vaves Gunmeta ba vave IMI EIMEIER / Shut-off vaves / Gobo Gobo Gobo is used as a versatie shut-off eement in pump hot-water heating systems. Thanks to the compact working radius of the operating

More information

ANCILLARY DEVICES. Contents. Fire System Document Box. EN54-4 Approved Power Supply Units. Transformer Rectifier 24v Door Retainer Power Supply Units

ANCILLARY DEVICES. Contents. Fire System Document Box. EN54-4 Approved Power Supply Units. Transformer Rectifier 24v Door Retainer Power Supply Units ANCILLARY DEVICES Contents Fire System Document Box EN54-4 Approved Power Suppy Units Transformer Rectifier 24v Door Retainer Power Suppy Units Door Hoders Fire System Document Box The new fire system

More information

ANALOGUE FIRE DETECTION SENTRI SYSTEM

ANALOGUE FIRE DETECTION SENTRI SYSTEM ANALOGUE FIRE DETECTION SENTRI SYSTEM SMS SMS is a Honeywe Life Safety Systems business, based in the UK offering a wide range of market eading fire detection and aarm products. Operating for over 25 years,

More information

Mica insulated flat heaters

Mica insulated flat heaters ... Infinite soutions... Mica insuated fat heaters MODE Z.37 (FT MI) Mica insuated fat heaters Mode Z.37 fat mica Technica data Use For heating fat surfaces of any dimension, such as: Mods for pastics

More information

INSTRUCTION MANUAL AND WARRANTY

INSTRUCTION MANUAL AND WARRANTY Brezza Tabetop Air Circuator with Adjustabe Osciation Mode No: OZF2 INSTRUCTION MANUAL AND WARRANTY Copyright 2011, Ozeri Important Safety Instructions Thank you for purchasing the Ozeri Tabetop Air Circuator.

More information

AUTOMATIC MARINE AND RV TOILETS

AUTOMATIC MARINE AND RV TOILETS AUTOMATIC MARINE AND RV TOILETS 1 THE INVENTOR, DESIGNER AND MANUFACTURER SINCE 1958, SFA SANIFLO IS THE WORLD S LEADER OF MACERATING TOILETS FOR THE MARINE AND RECREATIONAL VEHICLE INDUSTRIES Speciay

More information

Spray Etching Device

Spray Etching Device Spray Etching Device Spay Etching Device1 (for singe-side etching) Spray Etching Device 2 Item no.: 141070 0000 (for doube-side etching) Item no.: 141071 0000 The spray etching devices extend the range

More information

Operating Manual. Model Coolant Exchanger

Operating Manual. Model Coolant Exchanger Operating Manua Mode 75700 Cooant Exchanger Mode 75700 Cooant Exchanger SAFETY DEFINITIONS: Foow a WARNING, CAUTION, IMPORTANT, and NOTE messages in this manua. These messages are defined as foows: WARNING

More information

BC80A compact product catalog.

BC80A compact product catalog. BC80A compact product cataog. Buiding Technoogies 1 A wide range of appications. BC80A comprises an extensive product portfoio and can be instaed in various buiding types. For instance, it is a perfect

More information

List of Contents Air Top 2000 NOTE

List of Contents Air Top 2000 NOTE List of Contents Air Top 2000 Technica changes in this issue of the manua compared with its previous issue are identified with a vertica change bar on the efthand side of coumns. Air Top 2000 List of Contents

More information

Fire Alarm Panel - User Manual

Fire Alarm Panel - User Manual CONTENTS Page No. INTRODUCTION SYSTEM DESIGN AND PLAN GENERAL FEATURES MECHANICAL CONSTRUCTION INSTALLATION AND COMMISSIONING INSTALLATION COMMISSIONING OPERATION POWER CONDITION ZONE LOOP CONDITION KEY

More information

Small is beautiful and useful anywhere... Electric "Point of Use" Water Heaters "Open-Outlet" for single outlet "Unvented" for one or more outlets

Small is beautiful and useful anywhere... Electric Point of Use Water Heaters Open-Outlet for single outlet Unvented for one or more outlets S T I E B E L E L T R O N WATER HEATING Sma is beautifu and usefu anywhere... Eectric "Point of Use" Water Heaters "Open-Outet" for singe outet "Unvented" for one or more outets Sma is beautifu - Point

More information

Undercounter Dishwasher

Undercounter Dishwasher IMPORTANT: Read and save these instructions. IMPORTANT: Instaer: Leave Instaation Instructions with the homeowner. Homeowner: Keep Instaation Instructions for future reference, Save Instaation Instructions

More information

INDIA S MOST POWER SAVING INVERTER AC

INDIA S MOST POWER SAVING INVERTER AC INDIA S MOST POWER SAVING INVERTER AC 31 32 IDU ODU MODEL NOMENCLATURE GSC 12 GIG 5 DGOG GSC 18 GIG 5 DGOG GSC 18 FIXH 5 GGPG GSC 12 FIXH 7 GGPG GIC 12 BAH 8 GGQG GIC 24 BAH 5 GWQG GIC 18 LAH 5 GWQG GSC

More information

Clean and simple waste water removal

Clean and simple waste water removal The cean and simpe way to remove waste water. Wastefo products provide a simpe soution for waste water remova in a variety of environments. Cean and simpe waste water remova cean and simpe waste water

More information

ARG 1

ARG   1 www..com gas monitoring system Sma in size, yet very skifu anayser it has the best capabiities/price ratio. mamos is our aternative for arge, intricate CEMS systems, as it does not fa behind them concerning

More information

EPLE Air-Cooled. Chillers. EUWA*5-24KZ / EUWY*5-24KZ Hydronic systems

EPLE Air-Cooled. Chillers. EUWA*5-24KZ / EUWY*5-24KZ Hydronic systems EPLE0305 AirCooed Chiers EUWA*524KZ / EUWY*524KZ Hydronic systems Daikin water chiers are renowned throughout the word for their advanced technoogy, reiabiity and fexibe design characteristics a rare combination

More information

30 and 36 m Sealed Burner

30 and 36 m Sealed Burner IMPORTANT: Read and save these instructions. IMPORTANT: Instaer: Leave Instaation Instructions with the homeowner. Homeowner: Keep Instaation Instructions for future reference. Save Instaation Instructions

More information

9. ENERGY PERFORMANCE ASSESSMENT OF HVAC SYSTEMS

9. ENERGY PERFORMANCE ASSESSMENT OF HVAC SYSTEMS 9. ENERGY PERFORMANCE ASSESSMENT OF HVAC SYSTEMS Basics Refrigeration is the remova of heat from a materia or space, so that it's temperature is ower than that of it's surroundings. When refrigerant absorbs

More information

Buderus. Quality Doesn t Cost It Saves! Comfortable. Efficient. Intelligent Heating. GA124 GA244 Gas Boilers Sealed Combustion Draft Induced.

Buderus. Quality Doesn t Cost It Saves! Comfortable. Efficient. Intelligent Heating. GA124 GA244 Gas Boilers Sealed Combustion Draft Induced. [ Air ] [ Water ] [ Earth ] Buderus GA124 GA244 Gas Boiers Seaed Combustion Draft Induced [ Buderus ] Quaity Doesn t Cost It Saves! High Efficiency AFUEs Above 85% No Chimney... No Probem Whisper Quiet

More information

Caleo Neonatal incubator Software 2.n Instructions for Use Emergency Care Perioperative Care Critical Care Perinatal Care Home Care Because you care

Caleo Neonatal incubator Software 2.n Instructions for Use Emergency Care Perioperative Care Critical Care Perinatal Care Home Care Because you care Caeo Neonata incubator Software 2.n Instructions for Use Emergency Care Perioperative Care Critica Care Perinata Care Home Care Because you care How to use the Instructions for Use How to use the Instructions

More information

Underc Dishwasher. IMPORTANT: Read and save these instryctions. 8

Underc Dishwasher. IMPORTANT: Read and save these instryctions. 8 MPORTANT: Read and save these instryctions. 8 MPORTANT: nstaer: Leave nstaation nstructions with the homeowner. Homeowner: Keep nstaation nstructions for future reference. Save nstaation nstructions for

More information

Our home standard. Your home is where our heart is...

Our home standard. Your home is where our heart is... Our home standard. Your home is where our heart is... What is the Onward Home Standard? Our tenants have heped us to write our Home Standard so that you know what to expect when we ook after and improve

More information

Classic ECO. Eco Series -86 C Ultra-low Freezer KM-DU34H1E

Classic ECO. Eco Series -86 C Ultra-low Freezer KM-DU34H1E Eco Series -86 Utra-ow Freezer KM-DU34H1E MO-19 incubator series Used by the university of Maastricht in their "in vitro project", in which they created the words first aboratory grown hamburger. Save

More information

CONVENTIONAL FIRE DETECTION

CONVENTIONAL FIRE DETECTION FIRE DETECTION Systems The SMS conventiona range of products is designed to meet the requirements of arge domestic and sma commercia instaations as we as provide the abiity to upgrade or expand existing

More information

REQUIRED CONDITIONS FOR OPTIONAL OPERATION OF AN AIR-CONDITIONING SYSTEM

REQUIRED CONDITIONS FOR OPTIONAL OPERATION OF AN AIR-CONDITIONING SYSTEM Buetin of the Transivania University of Braşov Series I: Engineering Sciences Vo. 4 (53) No. 1-2011 REQUIRED CONDITIONS FOR OPTIONAL OPERATION OF AN AIR-CONDITIONING SYSTEM G. NĂSTASE 1 I. BOIAN 1 Abstract:

More information

Motion & Presence Detectors

Motion & Presence Detectors Motion & Presence Detectors the success is in the system 2 Hager motion and presence detectors are suitabe for residentia and commercia, indoor and outdoor appications. They can be utiised to activate

More information

VRV AURORA AIR-COOLED SYSTEMS

VRV AURORA AIR-COOLED SYSTEMS VRV AURORA AIR-COOLED SYSTEMS Appications: COLD CLIMATE RESIDENTIAL OFFICE RETAIL SCHOOLS DAIKIN VRV AURORA Engineered for Cod Cimate and Heating Dominant Appications Subarctic / Arctic 15% North American

More information

Turbosteam iron steam/spray/steam boost

Turbosteam iron steam/spray/steam boost RN40697MUK Rev4_Instruction Book 08/12/2011 10:36 Page 1 Upon registration with Morphy Richards (UK & ROI ony) Register onine for your 3 year guarantee. See back of this instruction book for detais. (UK

More information

Nexus 1-8 Loop (A1557) Analogue Addressable Control Panel Application Guide

Nexus 1-8 Loop (A1557) Analogue Addressable Control Panel Application Guide Nexus 1-8 Loop (A1557) Anaogue Addressabe Contro Pane Appication Guide Contents Page 1.0 Introduction and Typica System Iustration 2 2.0 Cabinet Specifications 4 3.0 Hardware Specifications 9 4.0 Software

More information

UseAndCare. -. wh H 01. nawtouua*naur~- I Call our Comumw Aubtmnca Center with quwiion* cf ccmmonb. AIR CONDITIONERS

UseAndCare. -. wh H 01. nawtouua*naur~- I Call our Comumw Aubtmnca Center with quwiion* cf ccmmonb. AIR CONDITIONERS -. wh H 01 nawtouua*naur~- UseAndCare AIR CONDITIONERS L A Note to You... 2 Ar Conditioner Safety....3 Parts and Features....4 Operating Your Air Conditioner... 5 Starting your air conditioner... 5 Using

More information

Take control with... Energy Efficient Controls

Take control with... Energy Efficient Controls Take contro with... Energy Efficient Contros 1 A LEGACY OF ENERGY EFFICIENCY AND COST SAVINGS Nuaire and ventiation contros go back a ong way, starting from the days when the thenowner Brian Moss was a

More information

Air Vents AV-406. Proven Same proven, free-floating all stainless steel mechanism as used in Armstrong steam traps.

Air Vents AV-406. Proven Same proven, free-floating all stainless steel mechanism as used in Armstrong steam traps. Air Vents Air Vents Proven Same proven, free-foating a stainess stee mechanism as used in Armstrong steam traps. Leak-tight Positive cosing, free-foating stainess stee ever ensures eak-tight cosing under

More information

ASPIRATING SMOKE DETECTION SYSTEMS

ASPIRATING SMOKE DETECTION SYSTEMS ASPIRATING SMOKE DETECTION SYSTEMS Aspirating Smoke Detection FAAST TM LT FAAST LT deivers a fexibe soution for appications where standard detection methods are prone to faiure or fase aarm Designed with

More information

PRODUCT CATALOG MEDICAL AUTOCLAVE.

PRODUCT CATALOG MEDICAL AUTOCLAVE. PRODUCT CATALOG MEDICAL AUTOCLAVE www.abstac.com MEDICAL AUTOCLAVE Medica Autocave assure proper ceaning and disinfection of instruments and utensis for medica, denta and aboratory fied. It minimizes the

More information

INSTALLATION INSTRUCTION

INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION TWO-STAGE ULTRA MID-EFFICIENCY GAS-FIRED VARIABLE SPEED FURNACES Upfow / Horizonta Modes: P*DU - V / G8V Up To 130 MBH Output CONTENTS GENERAL INFORMATION... 3 UNIT INSTALLATION...

More information

Undercounter Dishwasher

Undercounter Dishwasher MPORTANT: Read and save these instructions. MPORTANT: nstaer: Leave nstaation nstructions with the homeowner, Homeowner: Keep nstaation nstructions for future reference. Save nstaation nstructions for

More information

INUI-LEDSDL10 Specification

INUI-LEDSDL10 Specification INUI-LEDSDL10 Specification Mode No.: INUI- LED-SDL-10-xx-xx Input Votage (input AC or DC) Wattage SMD LED chip (Watt) xxx Light mode: LED Down Light Company Brand INUI Features: 1. Product Name:LED Down

More information

DESIGN AND APPLICATION GUIDE VISUAL ALARMS

DESIGN AND APPLICATION GUIDE VISUAL ALARMS DESIGN AND APPLICATION GUIDE VISUAL ALARMS This guide offers an overview of the new reguations for the seection and design of visua aarms devices (aso known as VADs) in fire detection and aarm systems.

More information

DETERGENT & RINSE AID INJECTION

DETERGENT & RINSE AID INJECTION DETERGENT & RINSE AID INJECTION FEBRUARY 2015 FS 622615 in Partnership with Peristatic Pumps SEKO has been a eading manufacturer of dishwasher dosing systems for over 30 years. Their products combine safety,

More information

SECTION 6: page. by Honeywell. Section 6: Vigilon Loop Devices

SECTION 6: page. by Honeywell. Section 6: Vigilon Loop Devices SECTION : page Section : Vigion Loop Devices by Honeywe SECTION : page : VIGILON LOOP DEVICES Introduction to S-Quad by Honeywe S-Quad Extra Sensory Detection S-Quad features Gent s new S-Quad sensor

More information

iii. Compatible Loop Devices and Panel Responses 27 IMPORTANT NOTE: Read the instructions carefully before commencing installation and commissioning.

iii. Compatible Loop Devices and Panel Responses 27 IMPORTANT NOTE: Read the instructions carefully before commencing installation and commissioning. Nexus 1-8 Loop (A1557) Anaogue Addressabe Contro Pane Instaation and Commissioning Manua Contents Page 1.0 Introduction and Guided Tour 1 2.0 Cabinet Instaation 7 3.0 Engineer s Functions 9 4.0 Pane Check

More information

Vibracon LVL-A* Level limit switch for liquids, compact design

Vibracon LVL-A* Level limit switch for liquids, compact design Technical Information TI 364O/98/en/.07 8905 /07 0 Vibracon LVL-A* Level limit switch for liquids, compact design Application The Vibracon LVL-A* is a level limit switch for all kinds of fluids and is

More information

MANUAL DE INSTALACIÓN

MANUAL DE INSTALACIÓN MANUAL DE INSTALACIÓN Spit Duct Air Conditioner Digita Scro and DC Inverter Commercia Air-conditioner The Digita Scro and DC Inverter share the same indoor units. Thank you very much for purchasing our

More information

36 Electric Modular Downdraft Cooktop

36 Electric Modular Downdraft Cooktop MPORTANT: Read and save these instructions. MPORTANT: nstaer: Leave nstaation nstructions with the Homeowner. Homeowner: Keep nstaation nstructions for future reference. Save nstaation nstructtons for

More information

ComfiGrip iron steam/spray/shot/press

ComfiGrip iron steam/spray/shot/press RN40854 MUK Rev3_Instruction Book 11/10/2011 11:08 Page 1 Upon registration with Morphy Richards (UK & ROI ony) Register onine for your 3 year guarantee. See back of this instruction book for detais. (UK

More information

a guide to watering your garden

a guide to watering your garden a guide to watering your garden The diagram beow shows how the amount of water in a garden is constanty changing. A pant draws a its water from the soi so you have to make sure that there is enough water

More information

Operating Instructions VEGASWING 61. Vibrating level switch for liquids. - transistor (NPN/PNP) Document ID: 29225

Operating Instructions VEGASWING 61. Vibrating level switch for liquids. - transistor (NPN/PNP) Document ID: 29225 Operating Instructions Vibrating level switch for liquids VEGASWING 61 - transistor (NPN/PNP) Document ID: 29225 2 Contents Contents 1 About this document 1.1 Function... 4 1.2 Target group... 4 1.3 Symbols

More information

ACZC GENERAL CHARACTERISTICS VERSIONS OPTIONS ON REQUEST STANDARD OPTIONS AIR COOLED CHILLER WITH SCROLL COMPRESSORS. Cooling capacity: 170 kw 675 kw

ACZC GENERAL CHARACTERISTICS VERSIONS OPTIONS ON REQUEST STANDARD OPTIONS AIR COOLED CHILLER WITH SCROLL COMPRESSORS. Cooling capacity: 170 kw 675 kw Z IR OOLED HILLER WITH SROLL OMPRESSORS ooing capacity: 70 7 GENERL HRTERISTIS VERSIONS IR OOLED HILLERS 0 Muti scro compressors Direct expansion pate to pate type evaporator; eectrica heater to prevent

More information

ASPIRATING SMOKE DETECTION SYSTEMS

ASPIRATING SMOKE DETECTION SYSTEMS ASPIRATING SMOKE DETECTION SYSTEMS Aspirating Smoke Detection FAAST LT-200 (Standaone) Fire Aarm Aspirating Sensing Technoogy The FAAST LT-200 Aspirating Smoke Detector is designed with the instaer and

More information

Machinery Space Fire Protection System from an Approved Product Portfolio

Machinery Space Fire Protection System from an Approved Product Portfolio Machinery Space Fire Protection System from an Approved Product Portfoio Johnson Contros is a goba eader in fire suppression systems. Count on us to hep keep peope, property and the environment safer with

More information

PRODUCT CATALOG MEDICAL REFRIGERATOR. LABSTAC LTD, Kemp House, 152 City Road, London EC1V 2NX, United Kingdom. labstac.

PRODUCT CATALOG MEDICAL REFRIGERATOR. LABSTAC LTD, Kemp House, 152 City Road, London EC1V 2NX, United Kingdom. labstac. PRODUCT CATALOG MEDICAL REFRIGERATOR LABSTAC LTD, Kemp House, 152 City Road, London EC1V 2NX, United Kingdom. contact@abstac.com abstac.com MEDICAL REFRIGERATOR Engineered to meet the demanding requirements

More information

Operating Instructions VEGASWING 63 - Relay (DPDT)

Operating Instructions VEGASWING 63 - Relay (DPDT) Operating Instructions VEGASWING 63 - Relay (DPDT) Document ID: 29229 Vibration Contents Contents 1 About this document 1.1 Function.................................. 4 1.2 Target group..............................

More information

SSimdex and Power-Limited Fire Alarm Systems Operating and Installation Instructions

SSimdex and Power-Limited Fire Alarm Systems Operating and Installation Instructions -_... _-_.._..._..-..-.. -.. -I --. SSimdex 4001-9403 and -9404 Power-Limited Fire Aarm Systems Operating and Instaation Instructions Q 1996 Simpex Time Recorder Co. FA4-31-001 (574-001) A specifications

More information

water-cooled CHILLERS

water-cooled CHILLERS water-cooed CHILLERS APPLIED SYSTEMS www.daikin.eu cooing ony environmenta awareness Air Conditioning and the Environment Air conditioning systems provide a significant eve of indoor comfort, making possibe

More information

McEnergy Evolution GENERAL CHARACTERISTICS VERSIONS OPTIONS ON REQUEST STANDARD OPTIONS AIR COOLED CHILLER WITH SCREW COMPRESSORS

McEnergy Evolution GENERAL CHARACTERISTICS VERSIONS OPTIONS ON REQUEST STANDARD OPTIONS AIR COOLED CHILLER WITH SCREW COMPRESSORS ooing capacity: Exchanger Phe Exchanger S&T 3 GENERL HRTERISTIS Stepess capacity contro Indipendent circuit for each compressor Singe-screw compressors Direct expansion she&tube evaporator with singe-pass;

More information

Operating Instructions VEGASWING 63. Vibrating level switch with tube extension for liquids. Transistor (NPN/PNP) Document ID: 29230

Operating Instructions VEGASWING 63. Vibrating level switch with tube extension for liquids. Transistor (NPN/PNP) Document ID: 29230 Operating Instructions Vibrating level switch with tube extension for liquids VEGASWING 63 Transistor (NPN/PNP) Document ID: 29230 2 Contents Contents 1 About this document... 4 1.1 Function... 4 1.2 Target

More information

UseAndCare I 301 Call our Consumer Assistance Center with questions or comments. 22 TO 25 NO-FROST TOP FREEZER REFRIGERATOR

UseAndCare I 301 Call our Consumer Assistance Center with questions or comments. 22 TO 25 NO-FROST TOP FREEZER REFRIGERATOR UseAndCare Tabe of Contents (compete).................. 2 A Note to You................ 2 Refrigerator Safety....... 3 Parts and Features....... 4 Before Using Your Refrigerator... 5 Using Your Refrigerator...................

More information

VEGASWING 61. .com. - Relay (DPDT) Vibrating level switch for liquids. Installation & Maintenance Instructions. Supplied by

VEGASWING 61. .com. - Relay (DPDT) Vibrating level switch for liquids. Installation & Maintenance Instructions. Supplied by Installation & Maintenance Instructions VEGASWING 61 - Relay (DPDT) Vibrating level switch for liquids Supplied by.com Call us on +44 (0)118 916 9420 Email info@247able.com Operating Instructions Vibrating

More information

Installation and Operating Instructions

Installation and Operating Instructions THE PERFECT BALANCE OF FUNCTION AND STYLE LAUNDRY - DISHWASHING - COOKING - COOLING Instaation and Operating Instructions Freestanding Washing Machine MW6100P - 1000RPM - 6kg Load Pease read these instructions

More information

VRV T-Series WATER-COOLED SYSTEMS 10.17

VRV T-Series WATER-COOLED SYSTEMS 10.17 VRV T-Series WATER-COOLED SYSTEMS 10.17 Why Consider a Daikin VRV T-Series Water Cooed System? One Fexibe Package The Daikin VRV T-Series Water Cooed is a fexibe and moduar energy saving aternative to

More information

E W I TY S RP. ISO 9001:2008 Certified Co. EOT Crane DSL BUSBAR Systems FESTOON Systems BOX TYPE DSL Systems PENDANT Stations

E W I TY S RP. ISO 9001:2008 Certified Co. EOT Crane DSL BUSBAR Systems FESTOON Systems BOX TYPE DSL Systems PENDANT Stations VE IN QUAL BELIE I TY E W S RP ISO 9001:2008 Certified Co. EOT Crane DSL BUSBAR Systems FESTOON Systems BOX TYPE DSL Systems PENDANT Stations WE VE IN QUAL BELIE I TY S RP ISO 9001:2008 Certified Co. DSL

More information

INSTRUCTIONS FOR OPERATION AND CARE OF

INSTRUCTIONS FOR OPERATION AND CARE OF INSTRUCTIONS FOR OPERATION AND CARE OF LITTLE Therm Compact Thermaator Mode LT-4 P.O. Box 3527 City of Industry, CA, 91744-0527, U.S.A. 800-782-7706 626-968-6681 www.whitehamfg.com 6900-192-001 Division

More information

Operating Instructions VEGAKON 61 Transistor (NPN/PNP)

Operating Instructions VEGAKON 61 Transistor (NPN/PNP) Operating Instructions VEGAKON 61 Transistor (NPN/PNP) Document ID: 32648 Conductive Contents Contents 1 About this document 1.1 Function.................................. 3 1.2 Target group..............................

More information

Pressure sensors. Ex ia I / IIC T6 acc. to ATEX. Features. Description. Measuring ranges. Applications

Pressure sensors. Ex ia I / IIC T6 acc. to ATEX. Features. Description. Measuring ranges. Applications Force Pressure Temperature Switch Pressure sensors Ex ia I / IIC T6 acc. to ATEX with internal diaphragm with front flush diaphragm Accuracy: 0,25% and 0,5 % Standard output: 4...20 ma; 2-wire system Description

More information

Instructions for Installation and Use 50cm Free Standing Electric Cooker

Instructions for Installation and Use 50cm Free Standing Electric Cooker Instructions for Instaation and Use 50cm Free Standing Eectric Cooker C50ELB C50ELK C50ELW C50ELS C50ELX To the Instaer Before instaation fi in the product detais on the back cover this book. The information

More information

. Ev d & AUTOMATIC WASHER

. Ev d & AUTOMATIC WASHER c. Ev d & AUTOMATIC WASHER Design 2000 Large Capacity Mode LA61OOXS eezers, Refrrgerator-Freezers, Ice Makers, Dishwashers. Buit-In Ovens and Surface Units, Ranges, Microwave Ovens, Trash Compactors, Room

More information

Mynute Boiler Standard-Efficiency Wall-Hung Boilers with tank

Mynute Boiler Standard-Efficiency Wall-Hung Boilers with tank Key: Syste: Return R/Fow F/as Doestic water: net /utet /Recircuation Technica drawings Technica data B Buiktin DHW tank; A Conventiona fue; MYNUTE BLER 2/ BA View fro above 0 14 7,5 255,25 R/F MYNUTE BLER

More information