Sýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity

Size: px
Start display at page:

Download "Sýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity"

Transcription

1 FprEN Umsagnarfrestur til ICS: Gler í byggingar - Einangrunargler - Hluti 5: Samræmismat Glass in building - Insulating glass units - Part 5: Evaluation of conformity Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda

2 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM DRAFT pren June 2015 ICS Will supersede EN :2005+A2:2010 English Version Glass in building - Insulating glass units - Part 5: Evaluation of conformity Verre dans la construction - Vitrage isolant - Partie 5: Évaluation de la conformité Glas im Bauwesen - Mehrscheiben-Isolierglas - Teil 5: Konformitätsbewertung This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 129. If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation. Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. pren :2015 E

3 Contents Page Foreword Scope Normative references Terms and definitions Requirements Product description Determination of the characteristic s performances Characteristics of glass panes for use in insulating glass units Determination of characteristics of insulating glass units Characteristics other than listed in Dangerous substances Assessment and verification of constancy of performance AVCP General Determination of the product type (see 5.1, 1)) General Type testing of characteristic s performances Test reports Multiple lines/sites Factory Production control (FPC) General Inspection of samples in accordance with a prescribed test plan (see 5.1 2) a)) Initial inspection of factory and of factory production control (5.1 2) b)) Continuous surveillance and assessment of the factory production control (5.1 2) c)) General Procedure for modifications Pre-production products (e.g. prototypes) Marking and/or labelling General Product marking Annex A (normative) Effect of gas filling on thermal and sound insulation performances A.1 Determination of the value to be declared A.2 Example with krypton gas filling Annex B (informative) Installation of the Insulating Glass Units B.1 General B.2 Appropriate supports B.3 Installation and glazing conditions B.3.1 General B.3.2 Compatibility B.3.3 Protection of the edge seal against ultraviolet radiation B.3.4 Pressure limits on glass and prevention of frictional movements B.3.5 Prevention of contact of glass with support Annex C (informative) Provisions for voluntary involvement of third party(ies) C.1 General

4 C.2 Voluntary tasks for third parties C.3 Marking and labelling Annex D (normative) Rules for the use of other party TT results D.1 General D.2 Manufacturer supplying the other party TT results D.3 Manufacturer using the other party TT results D.4 Limitations on manufacturer using other party TT results Annex ZA (informative) Clauses of this European Standard addressing the provisions of EU Construction Products Regulation ZA.1 Scope and relevant characteristics ZA.2 Procedure for AVCP of Insulating glass units ZA.2.1 System(s) of AVCP ZA.2.2 Declaration of performance (DoP) ZA General ZA Content ZA Example of DoP ZA.3 CE marking and labelling Bibliography

5 Foreword This document (pren :2015) has been prepared by Technical Committee CEN/TC 129 Glass in building, the secretariat of which is held by NBN. This document is currently submitted to the CEN Enquiry. This document will supersede EN :2005+A2:2010. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. The main changes compared to the previous edition EN :2005+A2:2010 are: a) The standard has been revised to fulfil the requirements of the Regulation (EU) No 305/2011 (Construction Product Regulation), modified by Regulations (EU) No 157/2014, (EU) No 568/2014 and (EU) No 574/2014; b) Requirements for insulating glass units for use in structural sealant glazing systems (SSG) are given; c) The solar factor, g, is listed within the spectrophotometric characteristics to be declared in the Declaration of Performances (DoP); d) The durability/conformity assessment is listed within the characteristics to be declared in the DoP; e) The mechanical resistance shall be given in the DoP by the characteristic bending strength of the glass components. This European Standard Glass in Building - Insulating glass units consists of the following Parts: EN : Glass in Building - Insulating glass units - Part 1: Generalities, system description, rules for substitution, tolerances and visual quality EN : Glass in Building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration EN : Glass in Building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances EN : Glass in Building - Insulating glass units - Part 4: Methods of test for the physical attributes of edge seal components and inserts EN : Glass in Building - Insulating glass units - Part 5: Evaluation of Conformity EN : Glass in Building - Insulating glass units - Part 6 Factory production control 4

6 1 Scope This European Standard covers the evaluation of conformity and the factory production control of insulating glass units (IGU) for use in buildings. NOTE 1 For glass products with electrical wiring or connections for e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply. NOTE 2 Units for which the intended use is only artistic and therefore no essential requirement is required, are not subject to CE marking and are not part of this standard. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 356, Glass in building Security glazing Testing and classification of resistance against manual attack EN 410, Glass in building Determination of luminous and solar characteristics of glazing EN 673, Glass in building Determination of thermal transmittance (U value) Calculation method EN 674, Glass in building Determination of thermal transmittance (U value) Guarded hot plate method EN 675, Glass in building Determination of thermal transmittance (U value) Heat flow meter method EN 1063, Glass in building Security glazing Testing and classification of resistance against bullet attack pren :2015, Glass in building Insulating glass units Part 1: Generalities, system description, rules for substitution, tolerances and visual quality pren :2015, Glass in building Insulating glass units Part 2: Long term test method and requirements for moisture penetration pren :2015, Glass in building Insulating glass units Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances pren :2015, Glass in building Insulating glass units Part 4: Methods of test for the physical attributes of edge seal components and inserts pren :2015, Glass in building Insulating glass units Part 6 Factory production control and periodic tests EN 12600, Glass in building Pendulum test Impact test method and classification for flat glass EN 12758, Glass in building Glazing and airborne sound insulation Product descriptions and determination of properties EN 12898, Glass in building Determination of the emissivity EN :2014, Glass in building Structural sealant glazing Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing EN , Solar protection devices combined with glazing Calculation of total solar energy transmittance and light transmittance Part 2: Detailed calculation method 5

Sýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity

Sýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity ÍST EN 1279-5:2005+A2:2010 Fellur úr gildi 15.11.2010 ICS: 81.04 Gler í byggingar - Einangrunargler - 5. hluti: Samræmismat Glass in building - Insulating glass units - Part 5: Evaluation of conformity

More information

Sýnishorn Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/product standard

Sýnishorn Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/product standard ÍST EN 14449:2005 Gildistaka 30.11.2005 ICS: 81.04 Gler í byggingar - Lagskipt gler og lagskipt öryggisgler - Samræmismat/vörustaðall Glass in building - Laminated glass and laminated safety glass - Evaluation

More information

Sýnishorn Specifications for patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment

Sýnishorn Specifications for patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment ÍST EN 1865-1:2010+A1:2015 Gildistaka 15.11.2015 ICS: 11.16 Forskriftir fyrir sjúkraflutningabúnað til nota í sjúkrabifreiðum - Hluti 1: Almenn sjúkrabörukerfi og sjúkraflutningabúnaður Specifications

More information

ÍST EN :2015. Gildistaka ICS: 53.06

ÍST EN :2015. Gildistaka ICS: 53.06 ÍST EN 1459-3:2015 Gildistaka 15.11.2015 ICS: 53.06 Rough-terrain trucks - Safety requirements and verification - Part 3: Additional requirements for variable reach trucks fitted with elevating work platform

More information

Sýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015

Sýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015 ÍST EN 15224:2016 Gildistaka 15.3.2017 ICS: 3.12 Health care services - Quality management systems - Requirements based on EN ISO 9001:2015 Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun

More information

Sýnishorn Specification for mortar for masonry - Part 2: Masonry mortar

Sýnishorn Specification for mortar for masonry - Part 2: Masonry mortar ÍST EN 998-2:2016 Gildistaka 15.2.2017 ICS: 91.1 Kröfur til múrs til nota í múrvirki - Hluti 2: Múr til nota í múrvirki Specification for mortar for masonry - Part 2: Masonry mortar Staðfestur af Staðlaráði

More information

Sýnishorn Maintenance - Qualification of maintenance personnel

Sýnishorn Maintenance - Qualification of maintenance personnel ÍST EN 15628:2014 Gildistaka 20.11.2014 ICS: 3.08 Maintenance - Qualification of maintenance personnel Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD

More information

Sýnishorn Safety of machinery - Permanent means of access to machinesry - Part 3: Stairs, stepladders and guard-rails

Sýnishorn Safety of machinery - Permanent means of access to machinesry - Part 3: Stairs, stepladders and guard-rails ÍST EN ISO 14122-3:2016 Gildistaka 20.11.2016 ICS: 13.11 Öryggi véla - Varanlegar aðgönguleiðir að vélum - Hluti 3: Stigar, klifurstigar og handrið Safety of machinery - Permanent means of access to machinesry

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-29889-0 Edition 1 EN 572-6:2012 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass This national standard is

More information

Sýnishorn Fire resistance test for service installations - Part 1: Ventilation ducts

Sýnishorn Fire resistance test for service installations - Part 1: Ventilation ducts ÍST EN 1366-1:2014 Gildistaka 1.2.2015 ICS: 13.22 Eldþolsprófanir fyrir þjónustustöðvar - Hluti 1: Loftræstistokkar Fire resistance test for service installations - Part 1: Ventilation ducts Staðfestur

More information

Sýnishorn Safety of woodworking machines - One side thickness planing machines

Sýnishorn Safety of woodworking machines - One side thickness planing machines EN 860:2007+A2:2012 Umsagnarfrestur til 15.4.2012 ICS: 79.12 Öryggi trésmíðavéla - Þykktarheflar til vinnslu á einni hlið Safety of woodworking machines - One side thickness planing machines Staðfestur

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1051-2:2007 Ehitusklaas. Klaasplokid ja klaasist sillutiskivid. Osa 2: Vastavushindamine Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/product

More information

Sýnishorn Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics

Sýnishorn Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics ÍST EN 14885:2015 Gildistaka 15.12.2015 ICS: 71.1 Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics Staðfestur af Staðlaráði Íslands

More information

ILNAS-EN ISO 23640:2015

ILNAS-EN ISO 23640:2015 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) In-vitro-Diagnostika - Haltbarkeitsprüfung von Reagenzien für invitro-diagnostische Untersuchungen

More information

Sýnishorn Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking

Sýnishorn Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking ÍST EN 14387:2004+A1:2008 Gildistaka 1.5.2008 ICS: 13.34 Öndunarfærahlífar - Gassíur og samsettar síur - Kröfur, prófun, merking Respiratory protective devices - Gas filter(s) and combined filter(s) -

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14449:2005 Ehitusklaas. Lamineeritud klaas ja lamineeritud turvaklaas. Vastavushindamine/Tootestandard Glass in building - Laminated glass and laminated safety glass - Evaluation

More information

Sýnishorn Power installations exceeding 1 kv a.c. - Part 1: Common rules

Sýnishorn Power installations exceeding 1 kv a.c. - Part 1: Common rules ÍST EN 61936-1:2010 Gildistaka 25.2.2011 ICS: 29.02 Tók við af ÍST 170:2005, sjá einnig ÍST EN 50522:2010 Power installations exceeding 1 kv a.c. - Part 1: Common rules Staðfestur af Staðlaráði Íslands

More information

Sýnishorn Windows and doors - Watertightness - Test method

Sýnishorn Windows and doors - Watertightness - Test method ÍST EN 1027:2016 Gildistaka 25.9.2016 ICS: 91.06 Windows and doors - Watertightness - Test method Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD

More information

ÍST EN :2013. Gildistaka ICS: 75.2

ÍST EN :2013. Gildistaka ICS: 75.2 ÍST EN 14678-3:2013 Gildistaka 1.5.2013 ICS: 75.2 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at private

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16819 October 2015 ICS 03.240 English Version Postal services - Parcel boxes for end use - Technical features Services postaux

More information

English Version. Daylight of buildings

English Version. Daylight of buildings EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM DRAFT pren 17037 July 2016 ICS 91.160.01 English Version Daylight of buildings L'éclairage naturel des bâtiments Tageslicht in Gebäuden This draft European

More information

Geregistreerde Belgische norm

Geregistreerde Belgische norm ICS: 81.040.20 Geregistreerde Belgische norm NBN EN 15683-2 1e uitg., januari 2014 Normklasse: S 23 Glas voor gebouwen - Thermisch gehard profielbouwglas van natronkalk veiligheidsglas - Deel 2: Conformiteitsbeoordeling/Productnorm

More information

Sýnishorn General requirements for components used in drains and sewers

Sýnishorn General requirements for components used in drains and sewers ÍST EN 476:2011 Gildistaka 1.6.2011 ICS: 93.03 General requirements for components used in drains and sewers Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN

More information

Sýnishorn Ventilation in hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals

Sýnishorn Ventilation in hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals ÍSLENSKIR STAÐLAR CEN/TS 16244:2018 Gildistaka 15.5.2018 ICS: 91.04 Ventilation in hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals

More information

Sýnishorn Railway applications - Fire protection of railway vehicles - Part 2: Requirements for fire behaviour of materials and components

Sýnishorn Railway applications - Fire protection of railway vehicles - Part 2: Requirements for fire behaviour of materials and components ÍST EN 45545-2:2013 Fellur úr gildi 30.8.2013 ICS: 13.22 Búnaður til notkunar við járnbrautir - Eldvarnir í járnbrautarvögnum - Hluti 2: Kröfur varðandi hegðun efna og íhluta í eldi Railway applications

More information

ILNAS-EN ISO :2017

ILNAS-EN ISO :2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle (ISO 9606-1:2012, einschließlich

More information

FINAL DRAFT FprEN

FINAL DRAFT FprEN EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM FINAL DRAFT FprEN 16510-2-2 January 2016 ICS 97.100.30 Will supersede EN 13229:2001 English Version Residential solid fuel burning s - Part 2-2: Inset

More information

English Version. This Technical Report was approved by CEN on 11 December It has been drawn up by the Technical Committee CEN/TC 135.

English Version. This Technical Report was approved by CEN on 11 December It has been drawn up by the Technical Committee CEN/TC 135. TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 17052 January 2017 ICS 91.080.10 English Version Guidelines on implementing EN 1090-1:2009+A1:2011, Execution of steel structures and aluminium

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN Ehitusklaas. Klaaspaketid. Osa 5: Vastavushindamine Glass in building - Insulating glass units - Part 5: Evaluation of conformity EESTI STANDARDI EESSÕNA Käesolev Eesti standard EVS-EN

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 13445-102 May 2015 ICS 23.020.30 English Version Unfired pressure vessels - Part 102: Example of application of vertical vessel with bracket

More information

Sýnishorn Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item

Sýnishorn Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item ÍST EN 13823:2010+A1:2014 Gildistaka 1.3.2015 ICS: 13.22 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item Staðfestur

More information

DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann IRISH STANDARD I.S. EN 15102:2007 ICS 91.180 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie DECORATIVE WALLCOVERINGS -

More information

Founding - Magnetic particle testing

Founding - Magnetic particle testing Irish Standard Founding - Magnetic particle testing CEN 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus

More information

Office furniture - Office work chair - Part 2: Safety requirements

Office furniture - Office work chair - Part 2: Safety requirements Irish Standard Office furniture - Office work chair - Part 2: Safety requirements NSAI 2009 No copying without NSAI permission except as permitted by copyright law. EN 1335-2:2009 I.S. EN 1335-2:2000 EN

More information

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011) Irish Standard I.S. EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) NSAI 2011 No copying without NSAI permission except

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1555-7 January 2013 ICS 23.040.01; 91.140.40 Supersedes CEN/TS 1555-7:2003 English Version Plastics piping systems for the

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14889-1:2006 Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity

More information

Irish Standard I.S. EN :2009

Irish Standard I.S. EN :2009 Irish Standard NSAI 2009 No copying without NSAI permission except as permitted by copyright law. Incorporating amendments/corrigenda issued since publication: This document is based on: This document

More information

English Version. Office furniture - Office work chair - Part 4: Clarifications to EN :2000 (Dimensions)

English Version. Office furniture - Office work chair - Part 4: Clarifications to EN :2000 (Dimensions) TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 1335-4 October 2009 ICS 97.140 English Version Office furniture - Office work chair - Part 4: Clarifications to EN 1335-1:2000 (Dimensions)

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-32289-2 Edition 1 EN 1176-7:2008 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation This

More information

BIOLOGICAL EVALUATION OF MEDICAL

BIOLOGICAL EVALUATION OF MEDICAL IRISH STANDARD I.S. EN ISO 10933-12:2007 ICS 11.100.20 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353

More information

Medical gloves for single use - Part 2: Requirements and testing for physical properties

Medical gloves for single use - Part 2: Requirements and testing for physical properties Irish Standard I.S. EN 455-2:2015 Medical gloves for single use - Part 2: Requirements and testing for physical properties CEN 2015 No copying without NSAI permission except as permitted by copyright law.

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 12831-2 April 2017 ICS 91.120.10; 91.140.10 English Version Energy performance of buildings - Method for calculation of the design heat load

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 22475-3 December 2007 ICS 03.120.20; 03.100.30; 93.020 English Version Geotechnical investigation and testing - Sampling

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15102:2007 Dekoratiivsed seinakatted.tahvel- ja rullkatted Decorative wallcoverings - Roll and panel form EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev

More information

ILNAS-EN 62560:2012/A1:2015

ILNAS-EN 62560:2012/A1:2015 ILNAS-EN 62560:2012/A1:2015 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications Lampes à LED autoballastées pour l'éclairage général fonctionnant à des tensions

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-27398-9 Edition 1 EN 14509:2013 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Self-supporting double skin metal faced insulating panels Factory made products Specifications This national standard

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16429 March 2013 ICS 13.040.40 English Version Stationary source emissions - Sampling and determination of hydrogen chloride

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 442-3:2003 Radiators and convectors - Part 3: Evaluation of conformity Radiators and convectors - Part 3: Evaluation of conformity EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16165 April 2012 ICS 17.040.20; 93.080.10 English Version Determination of slip resistance of pedestrian surfaces - Methods

More information

National foreword. Text affected

National foreword. Text affected PUBLISHED DOCUMENT National foreword This Published Document is the UK implementation of CEN/TR 16946-2:2016. The UK participation in its preparation was entrusted to Technical Committee RHE/16, requirements

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16829 August 2016 ICS 13.220.40; 13.230; 53.040.10 English Version Fire and explosion prevention and protection for bucket elevators Prévention

More information

Bitumen and bituminous binders - Specifications for paving grade bitumens

Bitumen and bituminous binders - Specifications for paving grade bitumens Irish Standard I.S. EN 12591:2009 Bitumen and bituminous binders - Specifications for paving grade bitumens NSAI 2009 No copying without NSAI permission except as permitted by copyright law. EN 12591:2009

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16792 December 2014 ICS 61.020; 97.190 English Version Safety of children's clothing - Recommendations for the design and manufacture of children's

More information

Paper and board - Determination of grammage (ISO 536:2012)

Paper and board - Determination of grammage (ISO 536:2012) Irish Standard I.S. EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1401-2 May 2012 ICS 23.040.01; 93.030 Supersedes ENV 1401-2:2000 English Version Plastics piping systems for non-pressure

More information

Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs

Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs Irish Standard I.S. EN 13906-1:2013 Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs CEN 2013 No copying without NSAI permission except as

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-32335-6 Edition 1 (incorporating EN amdt 1) EN 13795:2011 Edition 2 (incorporating amdt 1) SOUTH AFRICAN NATIONAL STANDARD Surgical drapes, gowns and clean air suits, used as medical devices

More information

Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation

Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation Irish Standard I.S. EN 12606-1:2015 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation CEN 2015 No copying without NSAI permission except as permitted

More information

Hot rolled flat products made of high yield strength steels for cold forming

Hot rolled flat products made of high yield strength steels for cold forming ÖNORM EN 10149-2 Edition: 2013-11-01 Hot rolled flat products made of high yield strength steels for cold forming Part 2: Technical delivery conditions for thermomechanically rolled steels Warmgewalzte

More information

Biological evaluation of medical devices

Biological evaluation of medical devices BRITISH STANDARD Biological evaluation of medical devices Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:1997) ICS 11.100.20 NO COPYING WITHOUT BSI PERMISSION

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15316-6-6 April 2017 ICS 27.160; 91.120.10; 91.140.10 English Version Energy performance of buildings - Method for calculation of system energy

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 17221 April 2018 ICS 91.140.70 English Version Guidance on the application of CE marking and preparation of Declaration of Performance for

More information

ILNAS-EN 1845:2007. Footwear manufacturing machines - Footwear moulding machines - Safety requirements

ILNAS-EN 1845:2007. Footwear manufacturing machines - Footwear moulding machines - Safety requirements Footwear manufacturing machines - Footwear moulding machines - Safety requirements Machines pour la fabrication de chaussures - Machines de moulage pour chaussures - Prescriptions de sécurité Maschinen

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 225-1:2007 Atomizing oil burners - Oil burner pumps and oil burner motors- Connecting dimensions - Part 1: Oil burner pumps Atomizing oil burners - Oil burner pumps and oil burner

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12899-2:2007 Vertikaalsed püsiliikluskorraldusvahendid. Osa 2: Seest valgustatavad piirdetulbad Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)

More information

Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods

Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods Irish Standard Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods CEN 2013 No copying without NSAI permission except as permitted by copyright law. EN 716-2:2008/A1:2013

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1565-2 May 2012 ICS 23.040.20; 91.140.80 Supersedes ENV 1565-2:2001 English Version Plastics piping systems for soil and

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14889-2:2006 Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1187 January 2012 ICS 13.220.50; 91.060.20 Supersedes ENV 1187:2002 English Version Test methods for external fire exposure

More information

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) Irish Standard I.S. EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:

More information

CONFORMITY ASSESSMENT - SUPPLIER'S

CONFORMITY ASSESSMENT - SUPPLIER'S STANDARD I.S. EN ISO/IEC 17050-2:2004 ICS 03.120.20 National Standards Authority of Ireland Dublin 9 Ireland CONFORMITY ASSESSMENT - SUPPLIER'S Tel: (01) 807 3800 Fax: (01) 807 3838 DECLARATION OF CONFORMITY

More information

Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler

Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler Irish Standard I.S. EN 12952-3:2011 Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler NSAI 2011 No copying without NSAI permission except

More information

ILNAS-EN 61882:2016. Hazard and operability studies (HAZOP studies) - Application guide

ILNAS-EN 61882:2016. Hazard and operability studies (HAZOP studies) - Application guide ILNAS-EN 61882:2016 Hazard and operability studies (HAZOP studies) - Application guide Études de danger et d'exploitabilité (études HAZOP) - Guide d'application HAZOP-Verfahren (HAZOP-Studien) - Anwendungsleitfaden

More information

FINAL DRAFT FprEN

FINAL DRAFT FprEN EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM FINAL DRAFT FprEN 14960-1 January 2019 ICS 97.190; 97.200.50 Will supersede EN 14960:2013 English Version Inflatable play equipment - Part 1: Safety

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 3746:2007 Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD EESTI STANDARDIKESKUS

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15417:2006 Gas-fired central heating boilers - Specific requirements for condensing boilers with a nominal heat input greater than 70 kw but not exceeding 1000 kw Gas-fired central

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14073-2:2004 Office furniture - Storage furniture - Part 2: Safety requirements Office furniture - Storage furniture - Part 2: Safety requirements EESTI STANDARDIKESKUS EESTI STANDARDI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 60079-30-2:2007 Explosive - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance Explosive - Part 30-2: Electrical resistance

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16677 May 2014 ICS 11.040.70 English Version Ophthalmic optics - Reference method for the testing of spectacle frames and

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 1749 June 2014 ICS 91.140.40 Supersedes CEN/TR 1749:2009 English Version European scheme for the classification of gas appliances according

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16422 October 2012 ICS 59.080.30 English Version Classification of thermoregulatory properties Classement des propriétés de thermorégulation

More information

Operation of electrical installations -- Part 1: General requirements

Operation of electrical installations -- Part 1: General requirements Irish Standard I.S. EN 50110-1:2013 Operation of electrical installations -- Part 1: General requirements CENELEC 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:

More information

Gas meters - Additional functionalities

Gas meters - Additional functionalities Irish Standard Gas meters - Additional functionalities CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14845-1:2007 Test methods for fibres in concrete - Part 1: Reference concretes Test methods for fibres in concrete - Part 1: Reference concretes EESTI STANDARDIKESKUS EESTI STANDARDI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14854:2006 Aerosol containers - Glass containers - Dimensions of the neck finish Aerosol containers - Glass containers - Dimensions of the neck finish EESTI STANDARDIKESKUS EESTI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12504-4:2004 Testing concrete - Part 4: Determination of ultrasonic pulse velocity Testing concrete - Part 4: Determination of ultrasonic pulse velocity EESTI STANDARDIKESKUS EESTI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15035:2007 Heating boilers - Special requirements for oil fired room sealed units up to 70 kw Heating boilers - Special requirements for oil fired room sealed units up to 70 kw EESTI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14468-2:2015 Table tennis - Part 2: Posts for net assemblies - Requirements and test methods EVS-EN 14468-2:2015 EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 584-1:2006 Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography Non-destructive testing - Industrial radiographic

More information

High-voltage switchgear and controlgear -- Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kv (IEC :2011 (EQV))

High-voltage switchgear and controlgear -- Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kv (IEC :2011 (EQV)) Irish Standard I.S. EN 62271-203:2012 High-voltage switchgear and controlgear -- Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kv (IEC 62271-203:2011 (EQV)) NSAI 2012 No

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 54-32 July 2015 ICS 13.220.20; 13.320 English Version Fire detection and fire alarm systems - Part 32: Planning, design,

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 54-18:2006 Fire detection and fire alarm systems - Part 18: Input/output devices Fire detection and fire alarm systems - Part 18: Input/output devices EESTI STANDARDIKESKUS EESTI

More information

REFRIGERATING SYSTEMS AND HEAT

REFRIGERATING SYSTEMS AND HEAT IRISH STANDARD I.S. EN 378-2:2008 ICS 27.200 27.080 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie REFRIGERATING SYSTEMS

More information

FINAL DRAFT FprEN

FINAL DRAFT FprEN EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM FINAL DRAFT FprEN 13476-2 November 2017 ICS 23.040.01; 93.030 Will supersede EN 13476-2:2007 English Version Plastics piping systems for non-pressure

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14195:2005 Metallprofiilid kipsplaattarindite aluskonstruktsioonide jaoks. Definitsioonid, nõuded ja katsemeetodid Metal framing components for gypsum plasterboard systems - Definitions,

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16637-1 August 2014 ICS 19.040; 13.040.20; 91.100.01 English Version Construction products - Assessment of release of dangerous

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-33591-5 EN 12353:2013 SOUTH AFRICAN NATIONAL STANDARD Chemical disinfectants and antiseptics Preservation of test organisms used for the determination of bactericidal (including Legionella),

More information

SANS 21-1:2009 Edition 1 EN 115-1:2008

SANS 21-1:2009 Edition 1 EN 115-1:2008 ISBN 978-0-626-22589-6 EN 115-1:2008 SOUTH AFRICAN NATIONAL STANDARD Safety of escalators and moving walks Part 1: Construction and installation This national standard is the identical implementation of

More information

COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN :1999

COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN :1999 EUROPEAN STANDARD EN 50134-2 NORME EUROPÉENNE EUROPÄISCHE NORM May 1999 ICS 13.320 English version Systèmes d'alarme Systèmes d'alarme sociale Partie 2: Déclencheurs Alarm systems - Social alarm systems

More information