TECHNICAL DATA SHEET CONVENTIONAL FIRE ALARM SYSTEMS Conventional Fire Alarm Control Panel

Transcription

1 CVENTIAL ALARM S Features: Description: The LF-CP Series Fire Alarm Control Panel is manufactured based on advanced technology while maintaining high quality during assembly. It is of solid state circuitry and is designed and tested to meet the requirements of industrial or commercial applications. Up to 30 devices, combination of smoke, heat and manual call points, can be connected to a single zone. Any alarm coming from a zone would activate the sounder circuits, common alarm relay, zone relay and the panel audible circuit. Once the panel has been silenced and a subsequent alarm occurs in another zone, the internal speaker and sounder circuits would then re-activate with its associated zone relay. The system incorporates 2 built-in sounder circuits, a common alarm relay, configurable zone relays, 1 to 36 Zone Control Panels Control Key Switch Easy Push Button Control Switch Zone Circuit Monitoring for Open & Short Sounder Circuit Monitoring for Open & Short Up to 30 Detectors per Zone Multiple LED indicators for Quick Identification Individual Zone Relays Built-In Battery Charger Low/No Power and Battery Detection Automatic Loading and Testing of Battery Battery Lead Reversal Protection Evacuate (Alarm Resound) LED test Auxiliary 24VDC Power Fuse Protection for AC Main, Battery & Aux Power Circuit Protection for Zone & Sounder Circuits Provision for Repeater Panels Rigid Enclosure and a 24 VDC auxiliary output. All of which ensures the system can be easily configured to meet the requirements of the end user. It also has the provision to connect repeater panels. The repeaters are integrated into system utilizing a serial data line and a 24VDC power source. Up to repeaters can be connected to a single system. For security purposes, the Control Panel is fitted with a control key switch which locks all the pushbutton functions so only authorized personnel would be allowed to operate the system. The provided push-button keys allows the operator to Silence the local panel and alarm indicators during a fire or trouble condition, to Evacuate by operating all sounders and to perform a local lamp test and Reset the control unit. 1

2 CVENTIAL ALARM S Wiring and Terminal Details: Repeater Panel All Area Sounder Common Alarm Contact Zone 2 V 2.5cm 24VDC Auxiliary Power (Output) Input: 2VAC Output: Dual 1VAC 30W JP4 JP9 (Ext. Switch) Zone 4 to Relay 4 Zone 4 to Relay 3 Zone 3 to Relay 4 Zone 3 to Relay 3 Zone 3 to Relay 2 Zone 4 to Relay 4 Default Jumper Settings: JP4 Zone 4 to Relay 4 Zone 3 to Relay 3 (Battery) Zone 1 to Relay 3 Zone 1 to Relay 1 Zone 2 to Relay 2 Zone 1 to Relay 1 Zone 2 to Relay 2 See Jumper Settings Settable Normally Open Dry Contact Battery Zone Expander Board JP4 Zone 5 to Zone Zone 17 to Zone Zone 25 to Zone 2 See Jumper Settings Zone 9 to Zone 12 Zone 13 to Zone 16 Zone 21 to Zone 24 Zone 29 to Zone 32 JP1 Zone B to Relay 2 Zone A to Relay 1 Zone A to Relay 3 Zone C to Relay 2 Zone C to Relay 3 Zone C to Relay 4 J4 (Ext. Switch) Zone D to Relay 4 Zone D to Relay 4 Zone D to Relay 3 Default Jumper Settings: JP1 Zone B to Relay 2 Zone A to Relay 1 Zone C to Relay 3 Zone D to Relay 4 Master Display Board Zone 5 to Zone 12 See Jumper Settings Zone 13 to Zone Zone 21 to Zone 2 Zone 29 to Zone 36 2

3 CVENTIAL ALARM S Flat Ribbon Cable Connection: Main Display Board Pin Flat Cable Master Display Board Slave Display Board Zone Expander 26 Pin Flat Cable 16 Pin Flat Cable 3

4 CVENTIAL ALARM S Repeater Panel Termination: Model LF-RP 1-16 / LF-RP -36 Zone Model LF-RP 1-32 Zone Repeater Panel Repeater Panel Up To Repeater Panel Repeater Panel 4

5 ALARM PANEL ALARM PANEL ZE 5 ALARM PANEL ZE 5 ZE 13 ZE 6 ZE 6 ZE 14 ZE 7 ZE 7 ZE 15 COMM COMM ZE COMM ZE ZE 16 ZE 1 ZE 1 SILENCE SILENCE ZE 9 ZE 1 ZE 10 ZE 11 ZE 9 ZE 17 SILENCE ZE 10 ZE 1 ZE 11 ZE 19 ZE 4 ZE 4 ZE 12 ZE 4 ZE 12 ZE ALARM PANEL ZE 5 ZE 13 1 ALARM PANEL ZE 5 ZE ZE 6 ZE 14 2 ZE 6 ZE ZE 7 ZE 15 3 ZE 7 ZE COMM ZE ZE 16 4 COMM ZE ZE ZE 1 ZE 9 ZE 17 5 ZE 1 SILENCE ZE 10 ZE 1 6 ZE 11 ZE 19 7 ZE 9 ZE SILENCE ZE 10 ZE ZE 11 ZE ZE 4 ZE 12 ZE ZE 4 ZE 12 ZE 6 Dimensional Details: TECHNICAL DATA SHEET CVENTIAL ALARM S 1, 2, & 4 ZE 24 & 2 ZE , & 12 ZE 32 & 36 ZE & ZE

6 Technical Specification: Fuse Rating Zone 1, 2, & 4 Control Panel Zone 6, & 12 Control Panel Zone 16 & Control Panel Zone 24 & 2 Control Panel TECHNICAL DATA SHEET CVENTIAL ALARM S Zone 32 & 36 Control Panel 0.5A (5xmm) 3.0A (5xmm) 3.0A (5xmm) 0.75A (5xmm) 4.0A (5xmm) 4.0A (5xmm) 0.75A (5xmm) 7.0A (5xmm) 7.0A (5xmm) 1.0A (5xmm) 10.0A (5xmm) 10.0A (5xmm) 1.0A (5xmm) 10.0A (5xmm) 10.0A (5xmm) Ordering Information Model No. Description Dimension (mm) LF-CP/1 1 Zone Fire Alarm Control Panel 230 x 300 x 90 LF-CP/2 2 Zone Fire Alarm Control Panel 230 x 300 x 90 LF-CP/4 4 Zone Fire Alarm Control Panel 230 x 300 x 90 LF-CP/6 6 Zone Fire Alarm Control Panel 310 x 300 x 100 LF-CP/ Zone Fire Alarm Control Panel 310 x 300 x 100 LF-CP/12 12 Zone Fire Alarm Control Panel 310 x 300 x 100 LF-CP/16 16 Zone Fire Alarm Control Panel 415 x 300 x 100 LF-CP/ Zone Fire Alarm Control Panel 415 x 300 x 100 LF-CP/24 24 Zone Fire Alarm Control Panel 5 x 30 x 1 LF-CP/2 2 Zone Fire Alarm Control Panel 5 x 30 x 1 LF-CP/32 32 Zone Fire Alarm Control Panel 6 x 30 x 1 LF-RP/1-16 Zone 1 to 16 Zone Repeater Panel 1 x 1 x 32.5 LF-RP/-32 Zone to 36 Zone Repeater Panel 10 x 1 x 32.5 LF-RP 1-32 Zone 1 to 32 Zone Repeater Panel 190 x 230 x 6

7 Technical Specification: TECHNICAL DATA SHEET CVENTIAL ALARM S Power Requirement 2V AC 50/Hz + 10% Sounder Circuit Output Voltage Alarm Current 24V DC 1,2,4, 6, Zone 700mA 12, 16 Zone 1.0A, 24 Zone 1.5A 2, 32, 36 Zone 2.0A EOL 5.6K Zone Circuit Voltage Supervisory Current EOL Loop & Sounder Circuit Protection Auxiliary Relays Contact Rating Auxiliary Power 24V DC 4mA 5.6K 125V DC, 12A 250V AC, 7A 2V DC, 1A 24V DC, 1A 7