PRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LP-107
|
|
- Marylou Anthony
- 5 years ago
- Views:
Transcription
1 Reg. št. / Ref. : / Datum izdaje / Issued on: 16. februar 2018 Zamenjuje izdajo z dne / Replaces Annex dated: 28. december 2017 spletni strani SA,. the SA website,. PRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate Na podlagi sklepa št / so akreditiranemu organu začasno odvzete pravice iz akreditacije za obseg akreditacije, ki je v poglavju 3.2 osenčen in prečrtan. / Based on Decision no / , SA has suspended the accreditation body's rights deriving from accreditation for the scope of accreditation that is shaded and crossed-out in Chapter AKREDITIRANI ORGAN / Accredited body SIJ RAVNE SYSTEMS d.o.o. Koroška cesta 14, 2390 Ravne na Koroškem 2 STANDARD SIST EN ISO/IEC 17025: OBSEG AKREDITACIJE / Scope of accreditation V okviru te akreditacijske listine Slovenska akreditacija priznava akreditiranemu organu usposobljenost za opravljanje naslednjih dejavnosti: / SA hereby acknowledges the accredited body as being competent for performing the following activities: OB05-25 Izdaja 6 Stran 1 od 5
2 3.1 Skrajšan opis obsega akreditacije / A short description of the scope Področja preskušanja glede na vrsto preskušanja / Testing fields with reference to the type of test: neporušni preskusi (preiskave s penetranti, preiskave z magnetnimi delci, radiografija, ultrazvočne preiskave / non-destructive tests (penetrant testing, magnetic particle testing, radiography, ultrasonic testing) Področja preskušanja glede na vrsto preskušanca / Testing fields with reference to the type of test item: industrijski materiali in / industrial materials and OB05-25 Izdaja 6 Stran 2 od 5
3 3.2 Podroben opis obsega akreditacije / Detailed scope of accreditation Laboratorij za neporušne preiskave, Koroška cesta 14, 2390 Ravne na Koroškem Tabela / Table 1 Področja preskušanja glede na vrsto preskušanja: neporušni preskusi (preiskave s penetranti) / Testing fields with reference to the type of test: non-destructive tests (penetrant testing) item: industrial materials and Naslov standarda ali nestandardne Title of standard or non-standard and 1. SIST EN :2016 Preskušanje s penetranti Penetrant testing of testing (where relevant) kovine-odkovki metals - 2. SIST EN :2012 Preskušanje s penetranti Penetrant testing kovine-ulitki metalscastings Tabela / Table 2 Področja preskušanja glede na vrsto preskušanja: neporušni preskusi (preiskave z magnetnimi delci) / Testing fields with reference to the type of test: non-destructive tests (magnetic particle testing) item: industrial materials and Naslov standarda ali nestandardne Title of standard or non-standard and 3. SIST EN :2016 Preskušanje z magnetnimi delci Magnetic particle testing 4. SIST EN 1369:2013 Preskušanje z magnetnimi delci Magnetic particle testing of testing (where relevant) kovine-odkovki metals - kovine-ulitki metalscastings OB05-25 Izdaja 6 Stran 3 od 5
4 Tabela / Table 3 Področja preskušanja glede na vrsto preskušanja: neporušni preskusi (radiografija) / Testing fields with reference to the type of test: non-destructive tests (radiography) item: industrial materials and 5. SIST EN 15305:2009 AC:2009 Naslov standarda ali nestandardne Title of standard or non-standard and Neporušitveno preskušanje - Preskusna metoda analize zaostalih napetosti z uklonom rentgenskih žarkov Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction of testing (where relevant) jekleni izdelki in polizdelki steel and semifinished Tabela / Table 4 Mesto izvajanja: v laboratoriju / Site: in the laboratory Področja preskušanja glede na vrsto preskušanja: neporušni preskusi (radiografija) / Testing fields with reference to the type of test: non-destructive tests (radiography) item: industrial materials and Naslov standarda ali nestandardne Title of standard or non-standard and of testing (where relevant) 6. SIST EN ISO 5579:2014 Neporušitvene preiskave - Radiografski pregled kovinskih materialov z rentgenskimi ali gama žarki z uporabo filma - Osnovna pravila (ISO 5579:2013) Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (ISO 5579:2013) 150 mm ulitki castings SIST EN 12681:2003 Livarstvo Radiografska preiskava Founding - Radiographic examination OB05-25 Izdaja 6 Stran 4 od 5
5 Tabela / Table 5 Področja preskušanja glede na vrsto preskušanja: neporušni preskusi (ultrazvočne preiskave) / Testing fields with reference to the type of test: non-destructive tests (ultrasonic testing) item: industrial materials and Naslov standarda ali nestandardne Title of standard or non-standard and of testing (where relevant) 7. SIST EN 10308:2002 Neporušitveno preskušanje - Ultrazvočno preskušanje jeklenih palic Neporušitveno preskušanje - Ultrazvočno preskušanje jeklenih palic 8. SIST EN :2016 Neporušitveno preskušanje jeklenih izkovkov - 3. del: Ultrazvočno preskušanje feritnih ali martenzitnih jeklenih izkovkov Non-destructive testing of steel - Part 3: Ultrasonic testing of ferritic or martensitic steel 400 mm jeklene palice steel bars feritni in martenzitni jekleni odkovki ferritic and martensitic steel 9. SIST EN 10160:2001 Ultrazvočno preskušanje ploščatih jeklenih izdelkov, debelih 6 mm in več (tehnika impulzodmev) Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method) 10. SIST EN :2003 Livarstvo Ultrazvočna preiskava 1. del: Jekleni ulitki za splošno uporabo Founding - Ultrasonic examination - Part 1: Steel castings for general purposes 6 mm t 200 mm Ploščati jekleni izdelki Steel flat jekleni ulitki steel castings Opombe / Notes: V vseh točkah podrobnega obsega akreditacije, pri katerih v rubriki " preskušanja" ni navedenih podatkov, veljajo določila posameznih standardov oziroma nestandardnih preskusnih metod, ki se na to nanašajo. In all columns of the scope of accreditation where the cells under "Range of measurement, testing; of testing" are empty, the provisions of the relevant standards or non-standard s should apply. V točkah podrobnega obsega akreditacije, pri katerih sta v rubriki "Oznaka standarda" navedeni dve ali več oznak standardov, se sklic nanaša na v celoti identične standarde. In those columns of the scope of accreditation where the cells under Reference specify two or more codes of standards, the complete citation to identical standards should apply. Kopija priloge k akreditacijski listini za objavo na spletnem mestu. Podpisani original priloge na vpogled na sedežu SA. Copy of Annex to the accreditation certificate for web publishing. Signed original of Annex available for consultation at the SA head office. Direktor / Director dr. Boštjan Godec OB05-25 Izdaja 6 Stran 5 od 5
PRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LP- 099
Reg. št. / Ref. : 3150-0002/12-0013 Datum izdaje / Issued on: 22. december 2017 Zamenjuje izdajo z dne / Replaces Annex dated: 21. julij 2016 spletni strani SA,. the SA website,. PRILOGA K AKREDITACIJSKI
More informationPRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LP-076
Reg. št. 1 Ref. No. : 3151-0156/10-0006 Datum izdaje 1 /ssued on: 13. julij 2015 Zamenjuje izdajo z dne 1 Replaces Annex dated: 18. Junij 2014 spletni strani SA, www.slo-akreditacija.si Information on
More informationPRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LP-076
Reg. št. 1 Ref No.: 3151-0156/10-0004 Datum izdaje 1 /ssued on: 29. oktober 2012 Zamenjuje izdajo z dne 1 Rep/aces Annex dated: 18. september 2012 spletni strani SA, www.slo-akreditacija.si Information
More informationPRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LP-004
Reg. št. / Ref. : 3150-0011/10-0013 Datum izdaje / Issued on: 9. marec 2017 Zamenjuje izdajo z dne / Replaces Annex dated: 8. oktober 2015 spletni strani SA, www.slo-akreditacija.si. Information on current
More informationSEZNAM AKREDITIRANIH METOD V PRESKUSNEM LABORATORIJU IRMA (LP-008) / LIST OF ACCREDITED METHODS IN TESTING LABORATORY IRMA (LP-008)
SEZNAM AKREDITIRANIH METOD V PRESKUSNEM LABORATORIJU IRMA (LP-008) / LIST OF ACCREDITED METHODS IN TESTING LABORATORY IRMA (LP-008) 1 AKREDITIRANI ORGAN / Accredited body IRMA d.o.o. Ljubljana Slovenčeva
More informationPRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LP-047
Reg. št. / Ref. : 3150-0109/10-0012 Datum izdaje / Issued on: 10. oktober 2016 Zamenjuje izdajo z dne / Replaces Annex dated: 23. september 2015 spletni strani SA, www.slo-akreditacija.si. Information
More informationPRILOGA K AKREDITACUSKI LISTINI Annex to the accreditation certificate
SLOVENSKA AkREDlfACUA Reg. st. / Ref. : 3150-0119/10-0010 Datum izdaje / Issued on: 28. februar 2018 Zamenjuje izdajo z dne / Replaces Annex dated: 30. november 2016 Veljavnost akreditacije je mogofie
More informationMetode preskušanja cementa - 1. del: Določanje trdnosti Methods of testing cement - Part 1: Determination of strength
ima delno fleksibilni obseg (glej prilogo k akreditacijski listini LP 005), zato so v spodnji tabeli navedene izdaje standardov, po katerih se trenutno izvajajo preskušanja. Tabela 1/ Table 1 Tip obsega:
More informationSeznam akreditiranih metod Laboratorij za cemente, malte in keramiko
ima delno fleksibilni obseg (glej prilogo k akreditacijski listini LP 005), zato so v spodnji tabeli navedene izdaje standardov, po katerih se trenutno izvajajo preskušanja. Tabela 1/ Table 1 Tip obsega:
More informationPRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LP- 018
Reg. št. / Ref. : 3150-0039/10-0005 Datum izdaje / Issued on: 19. oktober 2015 Zamenjuje izdajo z dne / Replaces Annex dated: 20. oktober 2014 spletni strani SA, Information on current accreditation status
More informationSeznam akreditiranih metod Laboratorij za cemente, malte in keramiko
ima delno fleksibilni obseg (glej prilogo k akreditacijski listini LP 005), zato so v spodnji tabeli navedene izdaje standardov, po katerih se trenutno izvajajo preskušanja. Tabela 1/ Table 1 Tip obsega:
More informationPRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LP- 018
Reg. št. / Ref. : 3150-0039/10-0010 Datum izdaje / Issued on: 22. junij 2018 Zamenjuje izdajo z dne / Replaces Annex dated: 10. oktober 2017 spletni strani SA, Information on current accreditation status
More informationHAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for
HAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for Accreditation (EA) Multilateral Agreement PRILOG POTVRDI O
More informationGrađevinski laboratorij d.o.o. Borongajska cesta 84, HR Zagreb Laboratorij Sesvete Slatinska 7, HR Sesvete
PRILOG POTVRDI O AKREDITACIJI br: Annex to Accreditation Certificate Number: Klasa/Ref. No.: 383-02/11-30/063 Urbroj/Id. No.: 569-02/3-12-39 Datum izdanja priloga /Annex issued on: 2012-12-03 Norma: HRN
More informationHAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for
HAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for Accreditation (EA) Multilateral Agreement PRILOG POTVRDI O
More informationPRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LP-032
Reg. št. / Ref. : 3150-0070/10-0013 Datum izdaje / Issued on: 3. maj 2018 Zamenjuje izdajo z dne / Replaces Annex dated: 29. november 2017 spletni strani SA, www.slo-akreditacija.si. Information on current
More informationHAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for
HAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for Accreditation (EA) Multilateral Agreement PRILOG POTVRDI O
More informationHAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for
HAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for Accreditation (EA) Multilateral Agreement PRILOG POTVRDI O
More informationHAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for
HAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for Accreditation (EA) Multilateral Agreement PRIJEDLOG PRILOG
More informationSeznam akreditiranih metod. Laboratorij za toplotno zaščito in akustiko
Tip obsega: fleksibilen (možnost uvajanja manjših sprememb ) / Type of scope: flexible (possibility of implementing minor modifications of the method) Mesto izvajanja: v laboratoriju / Sit e: in the laboratory
More informationHAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for
HAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for Accreditation (EA) Multilateral Agreement PRILOG POTVRDI O
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 16371-1 First edition 2011-10-01 Non-destructive testing Industrial computed radiography with storage phosphor imaging plates Part 1: Classification of systems Essais non destructifs
More informationHAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for
HAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for Accreditation (EA) Multilateral Agreement PRILOG POTVRDI O
More informationNorma: HRN EN ISO/IEC 17025:2007 Standard: (ISO/IEC 17025:2005+Cor.1:2006; EN ISO/IEC 17025:2005+AC:2006)
PRILOG POTVRDI O AKREDITACIJI br: Annex to Accreditation Certificate Number: Klasa/Ref. No.: 383-02/13-30/002 Urbroj/Id. No.: 569-02/10-13-40 Datum izdanja priloga /Annex issued on: 2013-08-29 Norma: HRN
More informationLaboratorija za ispitivanje građevinskih materijala MMLab d.o.o. Kotor Lasta Grbaljska bb, Kotor
Dodatak Sertifikatu o akreditaciji - identifikacio : ATCG-0042 Annex to Accreditation Certificate-Identification Number:ATCG-0042 Dodatak Sertifikatu o akreditaciji sa akreditaciom em Li 15.21 Annex to
More informationHAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for
HAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for Accreditation (EA) Multilateral Agreement PRILOG POTVRDI O
More informationAnnex of the Certificate (Page 1/4) Scope of Accreditation
Annex of the Certificate (Page 1/4) As a "Type A" Inspection Body Address : İçerenköy Mah. Umut Sk. E5 Yanyol Üzeri AND Binası No:12 İç Kapı No :4 Ataşehir/ 34752 İSTANBUL/TÜRKİYE Phone : 0 216 651 08
More informationElite Safety Consultants. Your One Stop Safety Solution Provider Safety: It s a choice and not a chance. A glimpse at our Profile
Your One Stop Safety Solution Provider Safety: It s a choice and not a chance A glimpse at our Profile We have been accredited by (DAC) Dubai Accreditation Centre of Dubai Municipality List of Accredited
More informationPRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LK-004
Reg. št. / Ref..: 3150-0005/10-0019 Datum izdaje / Issued on: 21. december 2017 Zamenjuje izdajo z dne / Replaces Annex dated: 10. november 2016 Veljavnost akreditacije je mogoče preveriti na spletni strani
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14141:2004 Valves for natural gas transportation in pipelines - Performance requirements and tests Valves for natural gas transportation in pipelines - Performance requirements and
More informationIzvlečki SIST
Izvlečki 3 2018. SIST Slovenski inštitut za standardizacijo Slovenian Institute for Standardization Sporočila Messages ISSN 1854-1631 3 KONTAKTNA TOČKA IN PRODAJA PUBLIKACIJ Kontaktna točka tematske poizvedbe
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10893-5 First edition 2011-04-01 Non-destructive testing of steel tubes Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection
More informationBULGARIAN ACCREDITATION SERVICES ACCREDITED ACCORDING TO BDS EN/ISO 17020:2005
BULGARIAN ACCREDITATION SERVICES CERTIFICATE FOR ACCREDITATION MULTITEST LTD Inspection Body of Type A Headquartered in Varna, West Industrial Zone, 1, Atanas Dalchev str., p.o.b. 161 UIC: 813141496 SCOPE
More informationPRILOG POTVRDI O AKREDITACIJI br: 3115 Annex to Accreditation Certificate Number:
PRILOG POTVRDI O AKREDITACIJI br: Annex to Accreditation Certificate Number: Klasa/Ref..: 383-02/17-70/001 Urbroj/Id..: 569-05/3-17-37 Datum izdanja priloga /Annex Issued on: 2017-07-20 Zamjenjuje prilog/replaces
More informationISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials
INTERNATIONAL STANDARD ISO 3452-2 First edition 2000-04-01 Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials Essais non destructifs Examen par ressuage Partie 2: Essais des
More informationDeclaration of Conformity
Declaration of Conformity DEMONSTRATION OF CONFORMITY WITH RECOGNIZED STANDARDS TO SATISFY THE SAFETY AND EFFECTIVENESS REQUIREMENTS OF THE CANADIAN MEDICAL DEVICES REGULATIONS Name of the medical device
More information25 TEXAS ADMINISTRATIVE CODE Radiation Safety Requirements for Analytical and Other Industrial Radiation Machines
25 TEXAS ADMINISTRATIVE CODE 289.228 Radiation Safety Requirements for Analytical and Other Industrial Radiation Machines Texas Regulations for Control of Radiation (effective July 1, 2000) 289.228(a)
More informationCarnegie Mellon University Radiation Safety Committee
Carnegie Mellon University Radiation Safety Committee PROCUREMENT, CONTROL, AND SAFE OPERATION OF RADIATION- PRODUCING DEVICES Rev. September 2017 Table of Contents 1. Registration 2. Surveys 3. Warnings
More informationAnnex of the Certificate (Page 1/7) Scope of Accreditation
Annex of the Certificate (Page 1/7) Scope of Accreditation As a "Type A" Inspection Body Address : Şerifali Mah. Açıkyüz Sok. No:2-3 Ümraniye 34775 İSTANBUL/TÜRKİYE Phone : 0 216 313 14 20 Fax : 0 216
More informationValves for natural gas transportation in pipelines Performance requirements and tests
SVENSK STANDARD SS-EN 14141 Fastställd 2003-12-19 Utgåva 1 Rörledningsarmatur Ventiler för rörledningar för naturgas Funktionskrav och provning Valves for natural gas transportation in pipelines Performance
More informationGUIDELINES FOR DESCRIBING THE ACCREDITATION SCOPES OF TESTING LABORATORIES
ATS-UP03 GUIDELINES FOR DESCRIBING THE ACCREDITATION SCOPES OF TESTING LABORATORIES Reviewed by: Natalija Jovičić Zarić MSc, Quality Manager (QM) Approved by: Dejan Krnjaić PhD, Director Issue/Revision:
More informationAPPLICATION FOR AUTHORISATION - PART 1
APPLICATION FOR AUTHORISATION - PART 1 Authorisation No.: (Will be assigned by the Norwegian Radiation Protection Authority) General information about the enterprise: Name of enterprise: Registration number:,
More informationIzvlečki SIST. Slovenski inštitut za standardizacijo Slovenian Institute for Standardization. Sporočila Messages ISSN
Izvlečki 2016. SIST Slovenski inštitut za standardizacijo Slovenian Institute for Standardization Sporočila Messages ISSN 1854-1631 9 KONTAKTNA TOČKA IN PRODAJA PUBLIKACIJ Kontaktna točka tematske poizvedbe
More informationFlashing Lights Controller: BSU 10x/20x/S
ELECTRONICS RESEARCH DEVELOPMENT Operating Manual Flashing Lights Controller: BSU 10x/20x/S Litostrojska cesta 44/d, SI-1000 Ljubljana T +386 (1) 514 18 00, F +386 (1) 514 18 04 info@itaia.si, www.itaia.si
More informationPQS Independent type-testing protocol
PQS Independent type-testing protocol WHO/XXX Original: English Distribution: General TITLE: Integrated electronic maximum-minimum thermometer, with factory programmed alarms, for vaccine refrigerators
More informationBRL-K602. Datum Evaluation Guideline
Datum 2018-09-04 for the Kiwa product certificate for valves, control valves and non-return valves for drinking water transport and drinking water distribution systems Preface This evaluation guideline
More information10.6 Schedule of Accreditation
Inspection Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment requirements for the operation of various
More informationHAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for
HAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for Accreditation (EA) Multilateral Agreement PRILOG POTVRDI O
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61223-2-7 First edition 1999-09 Evaluation and routine testing in medical imaging departments Part 2-7: Constancy tests Equipment for intra-oral dental radiography excluding
More informationInstitute for development and researches in the field of safety at work, Podgorica (Inspection body)
Dodatak Sertifikatu o akreditaciji sa akreditacionim brojem K A 10.02 Annex to Accreditation Certificate - Accreditation Number K A 10.02 Standard: MEST EN ISO/IEC 17020 :2013 Datum dodjele/ obnavljanja
More informationPressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"
D. EVALUATION ASSESSMENT PROCEDURES Guideline D-01 Guideline related to: Annex III, module G Is design approval by a notified body required under module G? Module G does not explicitly require formal design
More informationPQS Independent type-testing protocol
PQS Independent type-testing protocol WHO/XXX Original: English Distribution: General TITLE: Wall-mounted pen recording thermometer Product verification protocol: E06/TR04VP Applies to specification ref(s):
More informationHAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for
HAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for Accreditation (EA) Multilateral Agreement PRILOG POTVRDI O
More informationEXPRESSION OF INTEREST (EOI) FOR. Fire Fighting System (FFS)
EXPRESSION OF INTEREST (EOI) FOR Fire Fighting System (FFS) KWtE-03-PR-EO-ACC-0 Rev01 11 Version: Date: Prepared by: Approved: 01 7/11/18 VMC AMN Page 1 OF 5 1 Project overview ACCIONA s Engineering, Procuring
More informationPrilog Potvrdi o akreditaciji broj: 1046/09 Annex to Accreditation Certificate Number:
Prilog Potvrdi o akreditaciji broj: 1046/09 Annex to Accreditation Certificate Number: Norma: Standard: HRN EN ISO/IEC 17025:2007 (ISO/IEC 17025:2005+Cor.1:2006; EN ISO/IEC 17025:2005+AC:2006) Klasa: 383-02/08-30/45
More informationTechnical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme:
Technical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme: Solar products and components Accreditation Kiwa Italia S.p.A. Via Treviso 32/34 31020 San Vendemiano (TV) Italia Tel: +39
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14784-2:2005 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays
More informationbest practice guide Pedestrian doorsets Fire resisting and/or smoke control characteristics - to
best practice guide Pedestrian doorsets Fire resisting and/or smoke control characteristics - to BS EN 16034: 2014 Permission to reproduce extracts from BS EN 16034 : 2014 is granted by BSI. DHF BEST PRACTICE
More informationREMOTE VERIFICATION OF THE CARBON FOOTPRINT CALCULATION TOOL OF MAESPA FOR REFERENCE PRODUCTS
REMOTE VERIFICATION OF THE CARBON FOOTPRINT CALCULATION TOOL OF MAESPA FOR REFERENCE PRODUCTS RECOMMENDATIONS REPORT BUREAU VERITAS CERTIFICATION DECEMBER 2018 Remote Verification of the carbon footprint
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3059 Third edition 2012-12-01 Non-destructive testing Penetrant testing and magnetic particle testing Viewing conditions Essais non destructifs Contrôles par ressuage et contrôles
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61223-2-9 First edition 1999-09 Evaluation and routine testing in medical imaging departments Part 2-9: Constancy tests Equipment for indirect radioscopy and indirect radiography
More informationSCOPE OF ACCREDITATION. High-visibility clothing EC type examination LST EN ISO 20471:2013. EC type examination LST EN ISO 11611:2008
Annex 2 to the Accreditation Certificate No. LA.01.048 issued on 02-07-2013, Page 1 of 2 DEPARTMENT of TEXTILES PHYSICAL-CHEMICAL TESTING Notified body No.1401 of Textile Institute of State scientific
More informationTest report. ifesesws^ Date: Number: T /17 Project file: C Pages: Product: Fixed general purpose LED luminaire
Sl/Q ifesesws^ SLOVENSKA AKREDITACIJA SIST EN ISO/ 1EC 17025 L-009 Test report Number: roduct: roject file: Fixed general purpose LED luminaire Date: ages: C20170767 2017-04-26 12 Type reference: LA-FL/G-xxW-xxxxK-Rxxx/xxx-(D10kGy)
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14420-4:2005+A1:2007 Hose fittings with clamp units - Part 4: Flange connections Hose fittings with clamp units - Part 4: Flange connections EESTI STANDARDIKESKUS EESTI STANDARDI
More informationEvaluation guideline. for the Kiwa product certificate for external Polyurethane Coatings on ductile iron pipes for underground installation
01-02-2012 Evaluation guideline for the Kiwa product certificate for external Polyurethane Coatings on ductile iron pipes for underground installation Preface This evaluation guideline has been accepted
More informationHAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for
HAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for Accreditation (EA) Multilateral Agreement PRILOG POTVRDI O
More informationISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 2: Determination of shear strength
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 9311-2 Second edition 2011-08-15 Adhesives for thermoplastic piping systems Part 2: Determination of shear strength Adhésifs pour réseaux de tuyauteries
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62317-7 First edition 2005-09 Ferrite cores Dimensions Part 7: EER-cores IEC 2005 Copyright - all rights reserved No part of this publication may be reproduced or utilized in
More informationAustralian Standard. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 0: Functional safety and AS 61508
AS 61508.0 2006 IEC/TR 61508-0:2005 AS 61508.0 2006 Australian Standard Functional safety of Part 0: Functional safety and AS 61508 This Australian Standard was prepared by Committee IT-006, Industrial
More informationVertical Greenery Systems (VGS) as passive tool for energy savings and acoustic insulation in buildings
Vertical Greenery Systems (VGS) as passive tool for energy savings and acoustic insulation in buildings International Conference on Living Walls and Ecosystem Services 6-8 th July 2015 University of Greenwich,
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13889:2007 Sepistatud terasest tõstesääklid üldotstarbelisteks tõstetöödeks. Rist- ja ümarsääklid. Kategooria 6. Ohutus Forged steel shackles for general lifting purposes - Dee shackles
More informationFire detection and alarm systems. Part 4: Power supply equipment (ISO :2003, MOD) AS (Incorporating Amendment No.
AS 7240.4 2004 (Incorporating Amendment No. 1) AS 7240.4 2004 Fire detection and alarm systems Part 4: Power supply equipment (ISO 7240-4:2003, MOD) This Australian Standard was prepared by Committee FP-002,
More informationEC type approval protocol No. 4 Domestic washing and drying procedures for textiles toys intended for children under 36 months (Rev2)
Co-ordination of the Notified Bodies NB-TOYS under the Safety of Toys Directive NB-TOYS/2017/098 Succeeds NB-TOYS 2017/082 22 December 2017 EC type approval protocol No. 4 Domestic washing and drying procedures
More informationFounding - Magnetic particle testing
Irish Standard Founding - Magnetic particle testing CEN 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COMPLIANCE CERTIFICATION SERVICES, INC. 1 Xindian Laboratory No.163-1, Jhongsheng Road Xindian District, New Taipei City 23151, Taiwan, R.O.C. Contact: Kurt
More informationDIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC.
DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC November 2010 Issued on: 2 December 2010 Chapter I: Register of new notifications
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV SUD AMERICA INC. 10 Technology Drive (Test Laboratory) Peabody, MA 01960 Mr. William Stinson Phone 1 978 573 2517 ELECTRICAL Valid To: December 31, 2019
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 334:2005 Gaasirõhuregulaatorid sisendrõhule kuni 100 baari Gas pressure regulators for inlet pressures up to 100 bar EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD
More informationHAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for
HAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for Accreditation (EA) Multilateral Agreement PRILOG POTVRDI O
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60068-2-82 Edition 1.0 2007-05 Environmental testing Part 2-82: Tests Test XW 1 : Whisker test methods for electronic and electric components INTERNATIONAL ELECTROTECHNICAL COMMISSION
More informationThis document is a preview generated by EVS
CEN WORKSHOP CWA 15627 December 2007 AGREEMENT ICS 77.040.10 Supersedes CWA 15627:2006 English version Small Punch Test Method for Metallic Materials This CEN Workshop Agreement has been drafted and approved
More informationISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements
INTERNATIONAL STANDARD ISO 14847 First edition 1999-04-01 Rotary positive displacement pumps Technical requirements Pompes volumétriques à mouvement rotatif Prescriptions techniques A Reference number
More informationREMOTE VERIFICATION OF THE CARBON FOOTPRINT CALCULATION TOOL OF MAESPA FOR REFERENCE PRODUCTS
REMOTE VERIFICATION OF THE CARBON FOOTPRINT CALCULATION TOOL OF MAESPA FOR REFERENCE PRODUCTS RECOMMENDATIONS REPORT BUREAU VERITAS CERTIFICATION JULY 2015 Remote Verification of the carbon footprint calculation
More informationAn Introduction to the IECEx System and IECEx Scheme Certification Processes IECEx Secretariat January 2018
INTERNATIONAL ELECTROTECHNICAL COMMISSION An Introduction to the IECEx System and IECEx Scheme Certification Processes IECEx Secretariat January 2018 IEC:2007 Pillars of the IEC building Standards Development
More informationTHIRD EDITION. Practical. Non-Destructive Testing. Baldev Raj T. Jayakumar M. Thavasimuthu. Alpha Science International Ltd. Oxford, U. K.
THIRD EDITION Practical Non-Destructive Testing Baldev Raj T. Jayakumar M. Thavasimuthu CD Alpha Science International Ltd. Oxford, U. K. ---------------Contents Foreword Preface to the Third Edition Preface
More informationISO INTERNATIONAL STANDARD. Liquid hydrogen Land vehicle fuel tanks. Hydrogène liquide Réservoirs de carburant pour véhicules terrestres
INTERNATIONAL STANDARD ISO 13985 First edition 2006-11-01 Liquid hydrogen Land vehicle fuel tanks Hydrogène liquide Réservoirs de carburant pour véhicules terrestres Reference number ISO 13985:2006(E)
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60454-2 Third edition 2007-06 Pressure-sensitive adhesive tapes for electrical purposes Part 2: Methods of test Commission Electrotechnique Internationale International Electrotechnical
More informationSTANDARDI NA PODROČJU UPORABE TEHNIČNIH PLINOV IN PLINSKE TEHNIKE
STANDARDI NA PODROČJU UPORABE TEHNIČNIH PLINOV IN PLINSKE TEHNIKE Oznaka Naslov slovenski Naslov angleški Osnova SIST CEN/TR 13480-7:2002 Kovinski industrijski cevovodi - 7. del: Smernice za ugotavljanje
More informationHARMONISATION STATUS OF SELECTED ELECTRICAL AND NON-ELECTRICAL Ex STANDARDS MARCH 2018
Harmonisation status of selected electrical and non-electrical ex standards BAS-PS-010 - Issue 1 - March 2018 P. 1 HARMONISATION STATUS OF SELECTED ELECTRICAL AND NON-ELECTRICAL Ex STANDARDS MARCH 2018
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1559-2:2014 Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 1559-2:2014
More informationINDUSTRIAL HEAT EXCHANGERS
INDUSTRIAL HEAT EXCHANGERS COILS / INDUSTRIAL HEAT EXCHANGERS / NUCLEAR PRODUCTS Overview Certifications CRN Applications / Products Air Dryers Compressed Natural Gas Economizers Engine & Turbine Exhaust
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 584-1:2006 Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography Non-destructive testing - Industrial radiographic
More informationIAS Accreditation Number UL International Germany GmbH Address Admiral Rosendahl Strasse 23 Neu Isenburg Germany
IAS Accreditation Number TL-437 Company Name Address Admiral Rosendahl Strasse 23 Neu Isenburg 63263 Germany Contact Name Ingmar Essert Telephone +4969489810234 Effective Date of Scope March 9, 2018 Accreditation
More informationEC Type Examination Certificate
EC Examination Certificate No. BSI/A./3.46/56436 This is to certify that: FirePro Systems Ltd 6 Koumandarias Street & Spyrou Araouzou Tonia Court No.2 Limassol 336 Cyprus Holds Certificate Number: BSI/A./3.46/56436
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60086-3 Second edition 2004-12 Primary batteries Part 3: Watch batteries This English-language version is derived from the original bilingual publication by leaving out all French-language
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. November 2017
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC November 2017 Issued on : 1 December 2017 Page 1 Information Procedure on Standards Notifications
More informationOBSEG METOD S FLEKSIBILNIM OBSEGOM AKREDITACIJE. Oddelek za kemijske analize živil, vod in drugih vzorcev okolja, Gosposvetska ulica 12, 4000 Kranj
OBSEG METOD S FLEKSIBILNIM OBSEGOM AKREDITACIJE Center za kemijske analize živil, vod in drugih vzorcev okolja Oddelek za kemijske analize živil, vod in drugih vzorcev okolja, Gosposvetska ulica 12, 4000
More informationBRL-K14026/ Evaluation Guideline. for the Kiwa product certificate for Extractable shower hoses for sanitary tapware
2017-05-12 for the Kiwa product certificate for Extractable shower hoses for sanitary tapware Preface This evaluation guideline has been accepted by the Kiwa Board of Experts Watercycle (CWK), in which
More informationCAN/ULC-S109 Flame Resistance of "Xanadu" Material
CAN/ULC-S109 Flame Resistance of "Xanadu" Material A Report To: Design/Craft Fabric Corporation 2230 Ridge Dr. Glenview, IL 60025 USA Phone: (847) 904-7000 E-mail: mboynton@design-craft.com Attention:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA INC. 1950 Evergreen Blvd., Suite 100 Duluth, GA 30096 Gary Flom Phone 678 775 2334 ELECTRICAL Valid To: March 31, 2020 Certificate
More information