Potter Wall Mount Select-A-Strobe

Transcription

1 104 Kenran Industrial Dr. Potter Wall Mount Select-A-Strobe SL-1224 SERIES SELECT-A-STROBE Call for additional listings 12 VDC with 15, 35 or 60 cd setting 24 VDC with 15, 35, 60, 5, 95 or distinct candela settings Candela selection view window 15/5 ADA compliant on 60cd setting Pre-wire back plate Universal back plate mounting (single gang, double gang, octagon, or 4 square) Single screw mounting Low current draw UL and cul listed Patents pending The SL-1224 Strobe Series provides a wide range of candela light output options in a single device. The candela settings include a 12 or 24 volt operation for the 15, 35 and 60 (5 on axis) candela settings and 24 volt operation for the 15, 35, 60, 5, 95 and 110 candela settings. The candela setting is displayed through the front window and is selectable using a drum wheel. The voltage input can be either regulated DC or full wave rectified (FWR) 12 volt or 24 volt with an operating range from 8 to 33V DC. The strobes can be synchronized using a control panel with the Potter (Amseco) sync protocol or a SMD10-3A sync module. The SL-1224 utilizes a universal mounting plate that will mount on a single gang, double gang, octagon and 4 square electrical boxes. The back plate allows the installer to mount the plate and terminate the wire connections. The strobe attaches in a hinge fashion from the top and is secured by a single mounting screw. The strobe completely covers the mounting back plate, therefore it can be mounted before other trades work is completed and not affect the final look. Installation Note: Installation must comply in accordance with applicable standards. Ordering Information 492 Stock Number Model Number Description Color SL-1224R Selectable strobe only Red SL-1224W Selectable strobe only White

2 104 Kenran Industrial Dr. Potter Wall Mount Select-A-Strobe SL-1224 SERIES SELECT-A-STROBE Wiring Diagram Dimensions: inches (mm) 6 5/64 (154.4) DWG# (12) High voltage may be bepresent inside the thelight assembly even though power is not is not connected. If access to tothe tehcomponent coponent board is required (removal or replacement), the capacitor must be bedischarged discarged by touching a wire to toboth ends of ofthe theflashtube. DO DO NOT NOT attempt attempt to to touch touch or or move move the the assembly assembly until until the the capacitor has has been been discharged. 2 5/16 (59) Specifications Strobe Current Light Max. RMS Operating Current (ma RMS) Output Reg. 12 VDC Reg. 12 FWR Reg. 24 VDC Reg. 24 FWR 15cd cd /5cd cd NA NA cd NA NA cd NA NA Note: All current draw shown is worst case. Light output in precentage when measured from the following directions per UL 191. Voltage 12/24V UL Designation Regulated 12 DC/FWR Regulated 24 DC/FWR Operating Voltage 8-1.5V 16-33V Flash Rate 60 times/min. Sync Module (SMD10-3A) NA Available Operating Temperature 32 F to 120 F (0 C to 49 C) Engineering Specifications The installer shall provide and install the Potter SL-1224 selectable strobe. The strobe shall have six (6) candela settings. The candela settings shall be selectable using a drum roller and shall display the candela setting on the front of the device. The strobe shall operate at 12 or 24 VDC regulated or full wave rectified. The strobe shall have an operating range between 8 and 33 VDC. The strobes can be synchronized using a control panel with the Potter (Amseco) sync protocol or a SMD10-3A sync module. The strobe shall utilize a mounting plate that allows the installer to pre-wire the mounting plate. The mounting plate shall be universal and mount on a single gang, double gang, octagon or 4 inch square box. The mounting plate shall be completely covered by the strobe and shall be secured by a single screw. The strobe shall be UL listed to standard 1638, General Signaling, and standard 191, Signaling Devices for the Hearing Impaired. In addition, the strobes shall be cul listed to CAN-ULC S

3 104 Kenran Industrial Dr. Potter Wall Mount Select-A-Strobe/Horn SH-1224 SERIES SELECT-A-STROBE/HORN Call for additional listings 12 VDC with 15, 35 or 60 cd setting 24 VDC with 15, 35, 60, 5, 95 or 110 cd settings 6 distinct candela settings Candela selection view window 15/5 ADA compliant on 60cd setting 33 sound output settings Horn or chime sound output Pre-wire back plate Universal back plate mounting (single gang, double gang, octagon, or 4 square) Single screw mounting Low current draw UL and cul listed Patents pending The SH-1224 Strobe/Horn Series provides a wide range of candela light output options in a single device. The candela settings include a 12 or 24 volt DC operation for the 15, 35 and 60 (5 on axis) candela settings and 24 volt DC operation for the 15, 35, 60, 5, 95 and 110 candela settings. The candela setting is displayed through the front window and is selectable using a drum wheel. The horn settings include Temporal, Non-Temporal, March Time and a Chime sound. The horn also has Low, Mid and High volume settings for each pattern and tone. The tones include 2400 Hz, Electro- Mechanical, Broadband and Chime. Installation The voltage input can be either regulated DC or full wave rectified (FWR) 12 volt or 24 volt operation with an operating range from 8 to 33 V DC. The strobes can be synchronized using a control panel with the Potter (Amseco) sync protocol or a SMD10-3A sync module. The SH-1224 utilizes a universal mounting plate that will mount on a single gang, double gang, octagon and 4 square electrical boxes. The back plate allows the installer to mount the plate and connect the wire connections. The strobe attaches in a hinge fashion from the top and is secured by a single mounting screw. The strobe completely covers the mounting back plate, therefore it can be mounted before other trades work is completed and not affect the final look. A jumper plug is provided to test for correct wiring in the supervisory mode only. Do not pass alarm current through the jumper. Note: Installation must comply in accordance with applicable standards. Ordering Information Stock Number Model Number Description Color SH-1224R Selectable strobe/horn/chime Red SH-1224W Selectable strobe/horn/chime White 494

4 104 Kenran Industrial Dr. Potter Wall Mount Select-A-Strobe/Horn SH-1224 SERIES SELECT-A-STROBE/HORN Dimensions: inches (mm) Light output in precentage when measured from the following directions per UL /16 (59) 6 5/64 (154.4) 5 (12) High voltage may be bepresent inside the light assembly even though power is isnot not connected. If Ifaccess to tothe tehcomponent coponent board is isrequired (removal or orreplacement), the thecapacitor must be discharged discarged by touching a wire to both ends of the flashtube. DO DONOT attempt to totouch ormove the assembly until the capacitor has hasbeen discharged. Specifications Strobe Current Light Max. RMS Operating Current (ma RMS) Output Reg. 12 VDC Reg. 12 FWR Reg. 24 VDC Reg. 24 FWR 15cd cd /5cd cd NA NA cd NA NA cd NA NA Voltage 12/24V UL Designation Regulated 12 DC/FWR Regulated 24 DC/FWR Operating Voltage 8-1.5V 16-33V Flash Rate 60 times/min. Sync Module (SMD10-3A) NA Available Operating Temperature Indoor model: 32 F to 120 F (0 C to 49 C) Note: To determine total current draw, add desired strobe setting and horn selection. Refer to the installation instructions for further information. Horn Dipswitch Pattern 1 ON - Non-temporal 1 OFF - Temporal Both 2 = OFF 1 and 2 ON = March Time ON Tone 3 and 4 ON = 2400Hz 3 ON and 4 OFF = Electromechanical 3 and 4 OFF = Chime 3 OFF and 4 ON = Broadband Volume 5 and 6 ON = High 5 ON and 6 OFF = Mid 5 and 6 OFF = Low and 8 ON = Horn/strobe on 2 wires and 8 OFF = Horn and strobe on 4 wires

5 104 Kenran Industrial Dr. Potter Wall Mount Select-A-Strobe/Horn SH-1224 SERIES SELECT-A-STROBE/HORN Wiring Diagram H H Refer to the SMD 10-3A Sync Module instruction manual for Class A wiring or other application diagrams on page 482. DWG# Engineering Specifications The installer shall provide and install the Potter SH-1224 selectable strobe/horn. The strobe shall have six (6) candela settings. The candela settings shall be selectable using a drum roller and shall display the candela setting on the front of the device. The horn shall have 33 selectable settings configurable by dip switches. The sounder shall be capable of ANSI Temporal Code 3, March Time and produce a chime output. The horn shall have three distinct volume levels. The strobe/horn shall operate at 12 or 24 VDC regulated or full wave rectified. The strobe/horn shall have an operating range between 8 and 33 VDC. the strobes an by synchronized using a control panel with 496 the Potter sync protocol or the SMD10-3A sync module. The strobe shall utilize a mounting plate that allows the installer to pre-wire the mounting plate. The mounting plate shall be universal and mount on a single gang, double gang, octagon or 4 inch square box. The mounting plate shall be completely covered by the strobe and shall be secured by a single screw. The strobe shall be UL listed to standard 1638, General Signaling, and standard 191, Signaling Devices for the Hearing Impaired. In addition, the strobes shall be cul listed to CAN- ULC S526. The horn shall be UL listed to standard 464, Audible Signaling Devices.

6 104 Kenran Industrial Dr. Potter Wall Mount Select-A-Strobe/Horn SH-1224 SERIES SELECT-A-STROBE/HORN Non-Temporal Horn Current Pattern Volume Max. RMS Current (ma RMS Current) dba Reverberant Ratings per UL ft.) dba Anechoic Ratings per CAN/ULC S ft.) Reg 12 VDC Reg 24 VDC Reg 12 VDC Reg 24 VDC Reg 12 VDC Reg 24 VDC 2400 Hz Electro-Mechanical Broadband Chime High Mid Low High Mid Low High Mid Low High Mid Low Temporal Horn Current Pattern Volume Max. RMS Current (ma RMS Current) dba Reverberant Ratings per UL ft.) dba Anechoic Ratings per CAN/ULC S ft.) Reg 12 VDC Reg 24 VDC Reg 12 VDC Reg 24 VDC Reg 12 VDC Reg 24 VDC 2400 Hz Electro-Mechanical Broadband Chime High Mid Low High Mid Low High Mid Low High Mid Low March Time Horn Current Pattern Volume Max. RMS Current (ma RMS Current) dba Reverberant Ratings per UL ft.) dba Anechoic Ratings per CAN/ULC S ft.) Reg 12 VDC Reg 24 VDC Reg 12 VDC Reg 24 VDC Reg 12 VDC Reg 24 VDC 2400 Hz Electro-Mechanical Broadband High Mid Low High Mid Low High Mid Low

7 104 Kenran Industrial Dr. Potter Wall Mount Mass Notification Strobe CSL-1224W SERIES MASS NOTIFICATION STROBE Call for additional listings The CSL-1224W Strobe Series provides a wide range of strobe light output options in a single device. The strobe output setting is displayed through the front window and is selectable using a drum wheel. The voltage input can be either regulated DC or full wave rectified (FWR) 12 volt or 24 volt with an operating range from 8 to 33V DC. The strobes can be synchronized using a control panel with the Potter (Amseco) sync protocol or a SMD10-3A sync module. The CSL-1224W utilizes a universal mounting plate that will mount on a single gang, double gang, octagon and 4 square electrical boxes. Installation Note: Installation must comply in accordance with applicable standards. Outdoor installations require the use of the optional BBX-5 or BBK-1 bell back box. 3 settings at 12 VDC 6 settings at 24 VDC Strobe output selection view window Pre-wire back plate Universal back plate mounting (single gang, double gang, octagon, or 4 square) Single screw mounting Indoor or outdoor Anodized reflection for true light output UL and cul listed Patents pending * Outdoor installation requires the BBK-1 # , BBX-5R #420048, or BBX-5W # The back plate allows the installer to mount the plate and terminate the wire connections. The strobe attaches in a hinge fashion from the top and is secured by a single mounting screw that is concealed by a cover for a clean appearance. The strobe completely covers the mounting back plate, therefore it can be mounted before other trades work is completed and not affect the final look. The Potter mass notification strobe is listed for indoor and outdoor installations. For outdoor installations, the device must be mounted on a matching BBX-5 or BBK-1 outdoor bell back box. OPTIONAL BBK-1 OUTDOOR BOX Ordering Information Stock Number Model Number Body Color Lens Color CSL-1224W-AR Red Amber CSL-1224W-AW White Amber CSL-1224W-BR Red Blue CSL-1224W-BW White Blue CSL-1224W-GR Red Green CSL-1224W-GW White Green CSL-1224W-RR Red Red CSL-1224W-RW White Red 498

8 104 Kenran Industrial Dr. Potter Wall Mount Mass Notification Strobe CSL-1224W SERIES MASS NOTIFICATION STROBE Wiring Diagram Dimensions: inches (mm) 6 5/64 (154.4) 3.34 (85.) 5 (12) DWG# (85.) 2 5/16 (59) Back View DWG# OPTIONAL BBX-5 OUTDOOR BACK BOX 3.34 (85.) High voltage may maybe bepresent inside inside the the light light assembly even even though though power is isnot connected. If If access to to theteh component coponentboard is isrequired (removal or orreplacement), the the capacitor must must be be discharged discargedby bytouching a wire both ends of the flashtube. touching a wire to both ends of the flashtube. DO NOT attempt to totouch or ormove the theassembly until the thecapacitor has been discharged. Front View (15.) 3.34 (85.) (165.5) 5.5 (139.) Back View Specifications Strobe Current Setting Max. RMS Operating Current (ma RMS) Reg. 12 VDC Reg. 12 FWR Reg. 24 VDC Reg. 24 FWR NA NA NA NA NA NA Note: All current draw shown is worst case. Voltage 12/24V UL Designation Regulated 12 DC/FWR Regulated 24 DC/FWR Operating Voltage 8-1.5V 16-33V Flash Rate 60 times/min. Sync Module (SMD10-3A) NA Available Operating Temperature Candela Output Indoor model: 32 F to 120 F (0 C to 49 C) Outdoor model: -40 F to 151 F (-40 C to 66 C) Bottom View (23) 2 (50.8) DWG# Select-A- Light Output on Axis (cd) Switch Amber Blue Green Red Engineering Specifications The installer shall provide and install the Potter CSL-1224W selectable mass notification strobe. The strobe shall have six (6) selectable settings. The settings shall be selectable using a drum roller and shall display the setting on the front of the device. The strobe shall operate at 12 or 24 VDC regulated or full wave rectified (FWR) and have an operating range between 8 and 33 VDC. The strobes can be synchronized using a control panel with the Potter (Amseco) sync protocol or a SMD10-3A sync module. The strobe shall utilize a mounting plate that allows the installer to pre-wire the mounting plate. The mounting plate shall be universal and mount on a single gang, double gang, octagon or 4 inch square box. The mounting plate shall be completely covered by the strobe and shall be secured by a single screw. The device shall be listed for indoor and outdoor applications. Outdoor installations shall require a matching BBX-5 or BBK-1 weatherproof bell back box. covered by the strobe and shall be secured by a single screw. Operating temperature range will be 32 F to 120 F (0 C to 49 C) for indoor installations and -40 F to 151 F (-40 C to 66 C) for outdoor installations. The strobe shall be UL listed to standard In addition, the strobes shall be cul listed to CAN-ULC S

9 104 Kenran Industrial Dr. Potter Wall Mount Mass Notification Strobe/Horn CSH-1224W SERIES MASS NOTIFICATION STROBE/HORN Call for additional listings The CSH-1224W Strobe/Horn Series provides a wide range of candela light output options in a single device. The candela settings include a 12 or 24 volt DC operation for the 1-3 settings candela settings and 24 volt DC operation for the 1-6 candela settings. The candela setting is displayed through the front window and is selectable using a drum wheel. The horn settings include Temporal, Non-Temporal, March Time and a Chime sound. The horn also has Low, Mid and High volume settings for each pattern and tone. The tones include 2400 Hz, Electro- Mechanical, Broadband and Chime. The voltage input can be either regulated DC or full wave rectified (FWR) 12 volt or 24 volt operation with an operating range of 8 to Installation 3 settings at 12 VDC 6 settings at 24 VDC Strobe output selection view window Pre-wire back plate Universal back plate mounting (single gang, double gang, octagon, or 4 square) Single screw mounting 33 sound output settings Indoor or outdoor Anodized reflector for true light output UL and cul listed Patents pending * Outdoor installation requires the BBK-1 # , BBX-5R #420048, or BBX-5W # V DC. The strobes can by synchronized using a control panel with the Potter (Amseco) sync protocol or SMD10-3A sync module. The CSH-1224W utilizes a universal mounting plate that will mount on a single gang, double gang, octagon and 4 square electrical boxes. The back plate allows the installer to mount the plate and terminate the wire connections. The strobe/horn attaches in a hinge fashion from the top and is secured by a single mounting screw. The strobe/horn completely covers the mounting back plate, therefore it can be mounted before other trades work is completed and not affect the final look. The Potter mass notification strobe/horn is listed for indoor and outdoor installations. For outdoor installations, the device must be mounted on a matching BBX-5 or BBK-1 outdoor bell back box. Note: Installation must comply in accordance with applicable standards. OPTIONAL BBK-1 OUTDOOR BOX CSH-1224W CSL-1224W Ordering Information 500 Stock Number Model Number Body Color Lens Color CSH-1224W-AR Red Amber CSH-1224W-AW White Amber CSH-1224W-BR Red Blue CSH-1224W-BW White Blue CSH-1224W-GR Red Green CSH-1224W-GW White Green CSH-1224W-RR Red Red CSH-1224W-RW White Red

10 Dimensions: inches (mm) 104 Kenran Industrial Dr. Potter Wall Mount Mass Notification Strobe/Horn CSH-1224W SERIES MASS NOTIFICATION STROBE/HORN 3.34 (85.) OPTIONAL BBX-5 OUTDOOR BACK BOX 6 5/64 (154.4) 3.34 (85.) (165.5) 5.5 (139.) 3.34 (85.) Back View 5 (12) Front View (15.) 2 5/16 (59) Bottom View (23) 2 (50.8) DWG# (85.) Back View DWG# High voltage may be present inside the light assembly even though power is not connected. If access to the component board is required (removal or replacement), the capacitor must be discarged by touching a wire to both ends of the flashtube. DO NOT attempt to touch or move the assembly until the capacitor has been discharged. Specifications Strobe Current Setting Light Output Voltage 12/24V UL Designation Regulated 12 DC/ FWR Regulated 24 DC/FWR Operating Voltage 8-1.5V 16-33V Flash Rate 60 times/min. Sync Module (SMD10-3A) NA Available Operating Temperature Reg. 12 VDC Max. RMS Operating Current (ma RMS) Reg. 12 FWR Reg. 24 VDC Reg. 24 FWR 1 15cd cd /5cd cd NA NA cd NA NA cd NA NA Indoor model: 32 F to 120 F (0 C to 49 C) Outdoor model: -40 F to 151 F (-40 C to 66 C) Horn Dipswitch Pattern 1 ON - Non-temporal 1 OFF - Temporal Both 2 = OFF 1 and 2 ON = March Time ON Tone 3 and 4 ON = 2400Hz 3 ON and 4 OFF = Electromechanical 3 and 4 OFF = Chime 3 OFF and 4 ON = Broadband Volume 5 and 6 ON = High 5 ON and 6 OFF = Mid 5 and 6 OFF = Low and 8 ON = Horn/strobe on 2 wires and 8 OFF = Horn/strobe on 4 wires Note: To determine total current draw, add desired strobe setting and horn selection. Refer to the installation instructions for further information. 501

11 104 Kenran Industrial Dr. Potter Wall Mount Mass Notification Strobe/Horn CSH-1224W SERIES MASS NOTIFICATION STROBE/HORN Non-Temporal Horn Current Pattern Volume Max. RMS Current (ma RMS Current) dba Reverberant Ratings per UL ft.) dba Anechoic Ratings per CAN/ULC S ft.) Reg 12 VDC Reg 24 VDC Reg 12 VDC Reg 24 VDC Reg 12 VDC Reg 24 VDC 2400 Hz Electro-Mechanical Broadband Chime High Mid Low High Mid Low High Mid Low High Mid Low Temporal Horn Current Pattern Volume Max. RMS Current (ma RMS Current) dba Reverberant Ratings per UL ft.) dba Anechoic Ratings per CAN/ULC S ft.) Reg 12 VDC Reg 24 VDC Reg 12 VDC Reg 24 VDC Reg 12 VDC Reg 24 VDC 2400 Hz Electro-Mechanical Broadband Chime High Mid Low High Mid Low High Mid Low High Mid Low March Time Horn Current Pattern Volume Max. RMS Current (ma RMS Current) dba Reverberant Ratings per UL ft.) dba Anechoic Ratings per CAN/ULC S ft.) Reg 12 VDC Reg 24 VDC Reg 12 VDC Reg 24 VDC Reg 12 VDC Reg 24 VDC Hz Electro-Mechanical Broadband High Mid Low High Mid Low High Mid Low

12 104 Kenran Industrial Dr. Potter Wall Mount Mass Notification Strobe/Horn CSH-1224W SERIES MASS NOTIFICATION STROBE/HORN Wiring Diagram DWG# Engineering Specifications The installer shall provide and install the Potter CSH-1224W selectable strobe/horn. The strobe shall have six (6) selectable settings. The selectable settings shall be selectable using a drum roller and shall display the setting on the front of the device. The strobe shall have a colored lens and anodized reflector. A colored lens on a standard reflector shall not be acceptable. The horn shall have 33 selectable settings configurable by dip switches. The sounder shall be capable of ANSI Temporal Code 3, March Time and produce a chime output. The horn shall have three distinct volume levels. The strobe/ horn shall operate at 12 or 24 VDC regulated or full wave rectified. The strobe/horn shall have an operating range between 8 and 33 VDC. The strobe/horn shall utilize a mounting plate that allows the installer to pre-wire the mounting plate. The mounting plate shall be universal and mount on a single gang, double gang, octagon or 4 inch square box. The mounting plate shall be completely covered by the strobe/horn and shall be secured by a single screw. The device shall be listed for indoor and outdoor applications. Outdoor installations shall require a matching BBX-5 or BBK-1 weatherproof bell back box. The operating range shall be 32 F to 120 F (0 C to 49 C) for the indoor installations and -40 F to 151 F (-40 C to 66 C) for the outdoor installations. The strobe/horn shall be UL listed to standard 1638, General Signaling, and standard 191, Signaling Devices for the Hearing Impaired. In addition, the strobe/horns shall be cul listed to CAN-ULC S526. The horn shall be UL listed to standard 464, Audible Signaling Devices. 503

13 104 Kenran Industrial Dr. Potter Durable Siren/Siren Strobe A Brand SSX-82 SERIES DURABLE SIREN/SIREN STROBE Self-Contained /Indoor/Outdoor Siren and Siren/Strobe Sturdy aluminum back plate Strong polycarbonate housing Dual tamper protection Dual tone (steady and warble) 12dB sound output (steady and warble) Mounts directly to wall or 4 square back box Strobe consists of colored mirror and lens Available strobe colors: Amber, blue, clear, red The SSX-82 is a durable indoor/outdoor self-contained siren that is a more powerful version of the SSX-52. The full featured siren consists of a single tone that delivers a steady and warble sound output, 12dB output siren driver, and a dual action reed plunger for cover and rear protection. The SSX-82 is provided with a strong polycarbonate housing and a sturdy aluminum back plate to prevent warping and cracking. The SSX-82 comes completely assembled and ready for installation. The SSX-82S Siren-Strobe is also available. It includes all the great SSX-82 features with the addition of a colored strobe. The strobe uses a colored mirror and lens to ensure that the color can be easily distinguished, and is available in amber, blue, clear, or red. The SSX-82/82S excels in noisy areas such as warehouses, loading docks, print shops, busy production floors, or for indoor/outdoor applications where high quality and high output warning is required. Dimensions: inches (mm) External Dimensions: inch (mm) In case of the SSX-82S Tamper Switch.08 (180) 3.38 (85.8) 5 (12) 3.38 (85.8) Mounting Holes 4.3 (111) 5.9 (14) 0.1 DIA (ø4.5) SSX-82S SSX-8S SSX-82 Model Number Stock Number Rated Voltage Current Draw Operating Voltage Strobe Specifications Speaker Specifications Operating Temperature Lens Color Strobe Candela Rating on Axis Flash Rate Sound Output Tamper Contact Capacity SSX VDC 1.20 A Max. (typical) VDC SSX-82SA Amber 2.03 Min. SSX-82SB A Max. Blue 1.80 Min. 12 VDC VDC SSX-82SC (typical Clear 3.08 Min. SSX-82SR Red.5 Min times/min. 12dBA 12V DC -4 F to 149 F -20 C to 65 C

14 104 Kenran Industrial Dr. Potter Durable Siren/Siren Strobe A Brand SSX-82 SERIES DURABLE SIREN/SIREN STROBE Installation Step 1 Separate the housing from the back plate. Step 2 Mount the back plate directly to the wall or to a 4 square box. Step 3 Place the housing over the built-in hook to free your hands during wiring. solderless insulated Direct wall mount or to 4 square box. Step 4 Connect the siren and strobe wires to the terminal strip as indicated above. Rust-free aluminum die-cast. Up-front terminals with dual tamper protection. 509

15 104 Kenran Industrial Dr. Potter Durable Siren/Siren Strobe A Brand SSX-52 SERIES DURABLE SIREN/SIREN STROBE Self-Contained /Indoor/Outdoor Siren and Siren/Strobe Sturdy aluminum back plate Strong polycarbonate housing Dual tamper protection 120dB sound output Warble sound output Mounts directly to wall or 4 square back box Strobe consists of colored mirror and lens Available strobe colors: Amber, blue, clear, red The SSX-52 is a durable indoor/outdoor self-contained siren. The full featured siren consists of a single tone that delivers a warble sound output, 120dB output siren driver, and a dual action reed plunger for cover and rear protection. The SSX-52 is provided with a strong polycarbonate housing and a sturdy aluminum back plate to prevent warping and cracking. The SSX-52 comes completely assembled and ready for installation. The BBK-1 outdoor box may be used when an outdoor back box is required. The SSX-52S Siren-Strobe is also available. It includes all the great SSX-52 features with the addition of a colored strobe. The strobe uses a colored mirror and lens to ensure that the color can be easily distinguished, and is available in amber, blue, clear, or red. The SSX-52/52S excels in noisy areas such as warehouses, loading docks, print shops, busy production floors, or for indoor/outdoor applications where high quality and high output warning is required. Dimensions: inches (mm) External Dimensions: inch (mm) In case of the SSX-52S Tamper Switch.08 (180) 3.38 (85.8) 5 (12) 3.38 (85.8) Mounting Holes 4.3 (111) 5.9 (14) 0.1 DIA (ø4.5) SSX-52S SSX-5S SSX-52 Model Number Stock Number Rated Voltage Current Draw Operating Voltage Strobe Specifications Speaker Specifications Operating Temperature Lens Color Strobe Candela Rating on Axis Flash Rate Sound Output Tamper Contact Capacity SSX VDC 620 ma Max VDC SSX-52SA Amber 2.03 Min. SSX-52SB ma Blue 1.80 Min. 12 VDC VDC SSX-52SC Max. Clear 3.08 Min times/min. 120dBA 12V DC -4 F to 149 F -20 C to 65 C 510 SSX-52SR Red.5 Min. BBK-1* *Optional outdoor back box

16 104 Kenran Industrial Dr. Potter Recordable Siren Driver A Brand VSD-308 RECORDABLE SIREN DRIVER User recordable voice message On-board mini USB connection On-board software included.wav files easily uploaded from computer Fire/burglar message in English, Spanish or both 8 distinctive sound outputs 32 different selectable sound combinations Selectable temporal pattern Operates on 9-18 VDC Use with 4, 8 and 16 Ohm speakers Compatible with Amseco models SHX-51, SH-4, FHS-2, FHS-3 The VSD-308 is versatile and easy to install. This device provides users with the ability to customize a high quality message to be broadcast upon signal activation. A built-in mini USB connection allows end users to edit and upload pre-recorded messages digitally through their computers prior to installation. The on-board software allows new messages to be created or standard file formats to be converted. The VSD-308 is pre-loaded with standard burglar and fire voice alerts which can be broadcast in English, Spanish or both. In addition to the 8 on-board sound options, 64 different.wav files may be uploaded to the device using a mini USB cable (not included). Installation Wiring Multiple Speaker Wiring Configuration VOICE ALERT SIREN DRIVER PCB 8 4 Speakers 8 ohm Load 2 Speakers 4 ohm Load (Maximum power output) SPEAKER SPEAKER GND(-) 12V(+) BA FA DS1 S0 S1 S2 S3 S4 S5 F1 F2 F3 DIP SWITCH USB PORT ON OFF 8 8 One Speaker for 4 ohm or 6 ohm Speakers 16 ohm Load 8 8 DWG# * 8 ohm 15 watt Speakers are recommended. 4 ohm or 6 ohm Speakers, use one speaker only. DWG# Model Stock Number Input Voltage VSD VDC Current draw Idle - 160mA 4 ohm - 1.9A max 8 ohm - 1.1A max 16 ohm -.8A max 511

17 104 Kenran Industrial Dr. Potter Strobe Light A Brand SL-401 STROBE LIGHT Easy 2-wire connection with reverse polarity protection 60,000 candle power output 115mA current draw at 12V DC Two colored lead wires AWG#22 provided for input power connection Operating life in excess of 200 hours Available lens colors: amber, blue, clear, red The SL-401 is the lowest current consumption, weather-proof strobe in its class. It operates on 12V DC and draws a low 115mA. It is made of high impact resistant thermoplastic to stand up to abuse. The strobe is rated at 60,000 candle power and is designed with an operating life in excess of 200 hours of continuous operation. Stock Number Strobe Color Amber Blue Clear Red Application Bell Box Dimensions: inch (mm) 3.54 (90) 2.6 (0) 2 (50) Installation #8-32 x 1/2 Nuts Gasket Rubber Ring #8-32 x 1/2 Bolts 4 Square Backbox 1 1/2 Deep Base Trim Plate (SP-SL1B) Lens 1/8 (3) 3 5/16 (084) GASKETS Lens Lock Position 3.05 () Rubber Ring Base 10.4 ± 1.0 (265 ± 25) Secure the lens firmly in the lock position to create a good seal. Removing the lens repeatedly may cause the rubber ring to flatten and lose its efficiency. Specifications 512 Model Number Input Voltage Current Output (Amps) Operating Voltage (VDC) Flash Rate Per Minute Candle Power SL V DC 115mA ,000 Lens Color Available Amber, Blue Clear, Red Operating Temperature -4 F F -20 C - 60 C

18 104 Kenran Industrial Dr. Potter Conical Strobe Lights SL-5A SERIES CONICAL STROBE LIGHTS Polarized using filtered DC or unfiltered FWR input voltage 12/24V DC selectable voltage Solid state circuitry and a xenon flash tube Impact resistant black abs base Interchangeable polycarbonate lens Optional surface mount plate Model 4SP-MW Replacement interchangeable lens Model SL-LG Over 200 hours of operating life The SL-5A series strobes are a high performance, high intensity, solid state strobe, designed for applications where 360 visual annunciation is required. The strobe is polarized for connecting to supervised circuits and is designed with a xenon flash tube. The SL-5A is a high profile strobe with a low current draw of 250mA at 24V DC. The strobe can be used as a stand alone or in combination with other signaling devices to provide a visual verification signal. The SL-5A series strobes are recommended for use in areas such as; parking facilities, schools, corridors, apartments, office buildings, restaurants, hotels, and any other application where effective visual warning is required. Installation must comply in accordance with applicable standards and/or all state and local electrical codes and authority having jurisdiction. Wiring SL-5A Dimensions Package Includes: 1 ea. M3x6 screw and 2 ea. Rubber washers POWER SOURCE TERMINATE WITH WIRE NUTS OR EQUIVALENT RED (+) BLACK (-) DWG# ø3 15/16 (100) ø3 15/16 (100) 4 59/64 (125) 10 5/8 (20) 2 (50.8) 2 3/4 (0.1) DWG# (50.8) 2.6 (0.1) 2 3/4 Mounting holes for 2 screws. #8-32x2-1/2 long Model Number Stock Number Input Voltage Strobe Lens Color Average Current Amps Rush Current Amps Flash Rate (Flash/Min.) Operating Temperature SL-5A Body only SL-5AC Clear SL-5AB V/24V DC Blue SL-5AA Amber SL-5AR Red 12V DC 12V DC 24V 24V DC 1 Flash/sec 32 F F 0 C - 49 C Engineering Specifications The visual alarm indicating appliance shall be Potter Model SL-5A or equivalent device. The strobe shall be available in amber, blue, clear, and red lens. The signaling strobe shall operate from a non-coded regulated DC supply or full wave rectified, unfiltered supply. The signaling strobe shall be designed to produce a signal flash of flashes per minute with continuously applied voltage. The strobe shall be capable of surface mounting to a 4 square box using a Potter 4SP- MW plate. Visual signaling devices shall be installed as per plans and specifications. 513