Installation Instructions

Size: px
Start display at page:

Download "Installation Instructions"

Transcription

1 Installation Instructions 3M Light Mat Series Installation Bulletin Release D, Effective July 2010 (Replaces C, Apr 2010) See Bulletin Change Summary at end of Bulletin Product Description Product Numbers Product Specifications and Warranty Information This is a highly-reflective adhesive-backed film embedded with warranted, energy-efficient LED lights. Brightness is customer-configured by LED placement for excellent color balance and uniform illumination in enclosed sign boxes. Flexible and conformable to almost any size, unique shape or curve, it installs easily in existing sign boxes or slim-profile sign boxes. 3M Light Mat Series Refers to any configurations of light mat 3M Light Mat Refers to a parallel circuit light mat with amp LEDS 3M Light Mat X A A. Refers to a custom light mat: 1X = type of circuit AA = current rating of LEDs If X = 0, then parallel circuit If X = 1, then series circuit Please see Product Bulletin for product details and completed warranty information. It is available at Health and Safety! WARNING Risk of Electric Shock or Fire To reduce the risk of exposure to hazardous voltages, which could result in death, serious injury, or property damage Be sure your power supply is certified as Class 2 and/or LPS (Limited Power Supply). Class 2 and/or LPS, less than 100 Watts, constant current.! WARNING Risk of Exposure to Hazardous Voltages To reduce the risk of exposure to hazardous voltages, which could result in death, serious injury, or property damage: Be sure your power supply is certified as Class 2 and/or LPS. Class 2 and/or LPS, less than 100 Watts, constant current. Disconnect line power to power supply before attempting installation. Use care in working around the high voltage input to power supply. Never install with low voltage wiring coming into close proximity with high voltage input lines. Always install according to all local, state and national codes. Installation Bulletin

2 ! WARNING Use a Licensed, Qualified Electrician or Sign Installer Installation should be performed by a licensed, qualified electrician or sign installer who is familiar with electrical sign installations. Installation should comply with the National Electrical Code (NEC) and all state and local codes! CAUTION Avoid Damaging Light Mat with Electrostatic Discharge The 3M Flexible Light Mat contains parts and assemblies susceptible to damage by electrostatic discharge (ESD). To ensure that the 3M Flexible Light Mat is not damaged by ESD, ensure there is a proper earth ground for each sign box or section containing Light Mat.! WARNING Risk of Fire To reduce the risk of fire, do not connect outputs of Class 2 or LPS power supplies together.! CAUTION When handling any chemical products, read the manufacturers' container labels and the Material Safety Data Sheets (MSDS) for important health, safety and environmental information. To obtain MSDS sheets for 3M products go to 3M.com/MSDS, or by mail or in case of an emergency, call or When using any equipment, always follow the manufacturers' instructions for safe operation. Electrical Rating for Light Mat Nominal Voltage Max Amperage Max Watts per Channel V 5A 100W V 4.16A 100W V 2.0A 100W Light Mat Installation Kit Light Mat assemblies with leads attached Wire connector(s) Assembly diagram Wiring diagram Low voltage Class 2 power supply with manufacturers installation instructions. Power Supply Ferrite; only if supplied with Advance Power Supply LEDINTA 0024V41FO Light Mat Installation Instructions Tools and Supplies Helpful but not required or supplied Non-conductive caulk for void and/or perimeter areas, such as DOW Corning 748 RTV Diagonal wire cutter Utility knife Wire stripper Digital multimeter 3M Foam Applicator TSA-1 Isopropyl alcohol (IPA) Installation Bulletin

3 Remove Existing Electrical Components For retrofit kits only For retrofit applications the light mat and power supply are each marked with the UL Classification Mark. The retrofit kit is intended to be used with UL Listed neon or fluorescent channel letter or box signs of the neon or fluorescent type. Do not remove or paint over the original UL Listing Mark on the sign. Leave one copy of these installation instructions and the power supply installation instructions with the building owner or tenant for use by the local authority having jurisdiction or electrical inspector who will need them in order to approve the installation. Removal Procedure 1. Disconnect the main power to the sign by turning off the disconnect switch and the main circuit breaker. 2. Verify that the main power is off and any exposed electrical conductors are de-energized. 3. Disconnect the wires connecting the existing power transformer or ballast from the line supply side.! WARNING Avoid Interference with New Components All existing electrical components within a sign must be removed to avoid interference with new components. For neon signs these components may include some or all of the following: neon tubes, tube supports, neon power supplies and all secondary wiring. For fluorescent signs these components may include some or all of the following: fluorescent tubes, lamp sockets, ballast, and ballast secondary wiring. 4. Remove all existing transformers or ballasts. 5. Remove and replace any electrical enclosures that are corroded or damaged. If the existing enclosure is removed, replace with a properly sized enclosure as specified by the power supply manufacturer. Verify any self-contained power supplies not requiring an enclosure, installed outdoors, not under a roof or canopy are classified as "Wet" rated. 6. Carefully remove all glass tubes, tube supports, sockets and secondary wiring. Ensure that all removed material is disposed of properly according to your local regulations. 7. Except for those holes intended for ventilation and Class 2 power feed, all unused holes and openings must be sealed. 8. If an additional secondary wire is required, UL Listed PLTC Cable marked "Sunlight resistant (if exposed to weather) is recommended for connection of the light mat to the power supply. 9. Reconnection of line voltage must be in compliance with all Federal, State and Local electrical codes. Installation Bulletin

4 Cutting the Light Mat! CAUTION Avoid Damage to Copper Circuits when Cutting, Which May Result in Electrical Shorts The Light Mat contains two copper circuits separated by non-conductive film. A cut through the copper circuitry must not create burrs or edge artifacts that allow circuits to contact each other. Contact between the circuits will short out the Light Mat and cause it to fail. The following cautions must be observed when cutting the Light Mat: NEVER cut through the copper embedded in the Light Mat while Light Mat is powered, illuminated or energized. Any cut to the Light Mat must be at least 1/4 inch (63 mm) away from any LED on the Light Mat. This includes trimming as well as holes cut to feed through wires and attach mechanical fasteners. There must be a margin of at least 1/4 inch (63 mm) from the edge of the Light Mat to any sidewall of the light box. É ÉÉ ÉÉ É ÉÉ Circles represent areas through which you can cut. Notice the dashed lines showing potential cutting paths. DO NOT CUT through the rectangular areas, which represent double layer copper. Power Supplies If Cutting Is Needed Perimeter Caulking 3M Light Mats are engineered to your specifications and should not need to be modified. However, if you need to trim or cut the light mat, to maintain the integrity and life of the light mat, you must use perimeter caulk for any cut or damaged areas. If the copper circuitry in the Light Mat is exposed due to cutting or damage, the exposed circuitry must be sealed or protected from contact with metal surfaces or objects. To protect it, seal the exposed circuitry with a non-conductive caulk such as DOW Corning 748 RTV. All Light Mat kits used for the creation of new or retrofit applications will be provided with a UL Recognized Sign accessory Class 2 power supply. For Retrofit applications the power supply will also be marked with the UL Classification Mark Power Supply-R/C (UYMR2), a component sign accessory, LED power supply, is provided with a retrofit kit meeting the following specifications: - Marked Class 2 with an output rating suitable for the intended load and not exceeding 42.2 VDC maximum. - Power supply may have single or multiple Class 2 outputs. - Marked for damp location. - Only LED power supplies with integral input lead wires may be specified. - Supplies are identified for use in a minimum recommended ambient temperature of 40 C. (marking on power supply) Power Supplies continued on the next page. Installation Bulletin

5 All installations must comply with UL conditions of use as noted in the power supply manufacturers installation instructions and in the UL Sign Components Manual (SAM) ( No more than four LED drivers may be installed on a branch circuit. The power supply including input wiring shall be mounted inside a UL Listed sign raceway or electrical enclosure, or inside a remote mounted electrical enclosure having a UL Section of Sign UL Listing Mark. The source ground and power supply case should be electrically tied to the electrical enclosure. - If minimum size enclosure is specified by the power supply manufacturer It is recommended to use the smallest size enclosure recommended by the manufacturer. - If multiple LED power supplies are installed they must not be mounted closer than 1 inch end to end and 4 inch side to side and there shall be no interconnection between separate Class 2 output circuits or wiring. - Power supplies have ferrites attached for FCC Class A compliance. To be effective the ferrites must remain in place. DO NOT remove the ferrites. - For Light Mat kits supplied with Advance Power Supply LEDINTA0024V41FO, a separate ferrite is supplied which is to be installed on the AC input side of the power supply. One pass through the center of the ferrite of the Line, Neutral and ground wires is required for installation. Individual installation environments will vary. Be sure power supply installation complies with environmental conditions of use (wet or dry and proper spacing of power supplies within the enclosure) before completing installation. Power supply installation instructions are included in all retrofit kits. Read all installation instructions before attempting to install the Light Mat. Installation of Light Mat kits should be performed by a qualified electrician or sign installer. Surface Preparation 1. Make sure the surfaces and areas where the Light Mat will be applied are clean and free of dirt, grease, oil and debris. Installation - Remove all metal cuttings and burrs from application surfaces. - Wipe all application surfaces with Isopropyl Alcohol (IPA) and dry with a lint-free cloth. 2. Be sure the application surface is at least 40 F (4.5 C) and that it is clean and dry. Install the Light Mat 1. Locate the Light Mat component in the sign box according to the sign box assembly instructions and temporarily secure. 2. Position the mat, using strips of Scotch Masking Tape to hold the mat to the substrate. Then, apply a strip of masking tape 2 to 3 inch (5.1 to 7.5 cm) wide, horizontally across the top of the mat. See FIGURE 1. FIGURE 1 Make a Top Hinge Installation Bulletin

6 3. Raise the mat up over the top of the hinge and peel the liner back a few inches. See FIGURE 2. Note: The entire liner may be removed at this time, if desired. However, for very large mats, leaving the liner in place just prior to rolling to adhere it makes the mat more controllable, keeps the adhesive clean, and reduces the possibility of distorting the mat. FIGURE 2 Lift mat and Peel Back Liner 4. Keep the mat away from the surface and use two hands to peel back the liner a few more inches. See FIGURE 3. Then, continue rolling the mat, removing more liner, and rolling until the entire mat is applied. 5. Remove the tape hinge. Roll the top edge. 6. If needed, such as for feed-through locations, you can modify the form or fit the Light Mat. See Cutting the Light Mat, above, for important instructions. 7. Repeat the above steps for any remaining Light Mat kit components. 8. If the light mat is cut or damaged during installation seal the perimeter non conductive caulk. See Perimeter Caulking, above, for important instructions. FIGURE 3 Use Two Hands to Remove Liner Note: Other attachment systems may be used. Example: the Light Mat can be applied to a plastic base plate and the plastic attached to the cabinet by screws or hook and loop. Wiring Attach the wires to the LED power supply, matching the labels on mating parts. Refer to the Wiring Diagram. - Ensure that the sign box has a proper earth ground. - Do not alter the length of the wires. - When illuminated, the wires will not be visible inside the light box. However, if desired, the wires may be covered by 3M Light Enhancement Film (purchase separately). Wiring Diagram Line Neutral Ground Line: Black Neutral: White Ground: Green, if present +V 3M Light Mat Series Class Power Supply DC Gnd 120 VAC Connectors Class 2 Output: +V: Red DC Gnd: Black Consult power supply manufacturers installation instructions for connection of power supplies. Auto ranging power supplies are marked VAC or VAC. Removal of Light Mat The Light Mat cannot be reused after removing it from an application surface. Applying heat to the Light Mat may aid in removal. Installation Bulletin

7 Storage and Shelf Life Up to 2 years in original shipping container stored at 40 to 100 F (4 to 38 C) in a clean dry area. Troubleshooting Problem Possible Solution Light Mat will not illuminate Check for proper wiring of power supply connections Check voltage at power supply input Check voltage at power supply outputs Check for proper wiring of panel connections Check voltage at panel connections If the light mat was cut after receipt from 3M, check for shorts between the two circuits Lights are blinking Check for excessive loading of power supply If the light mat was cut after receipt from 3M, check for shorts between the two circuits Warranty and Limited Remedy FCC Rules, Part 15 Compliance 3M Related Literature The information contained and techniques described herein are believed to be reliable, but 3M makes no warranties, express or implied, including but not limited to any implied warranty of merchantability or fitness for a particular purpose. 3M shall not be liable for any loss or damages, whether direct, indirect, special, incidental or consequential, in any way related to the techniques or information described herein. Therefore, release of this document is contingent upon successful completion of the FCC testing. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide a reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense. Before starting any job, be sure you have the most current Product and Instruction Bulletins. The information in 3M Product and Instruction Bulletins is subject to change. Current Bulletins are available at 3Mgraphics.com. The following applicable Bulletins provide information and processes you need to properly make the mats described in this Bulletin. Additional Bulletins may be needed as indicated in the 3M Related Literature section of other 3M components you use. Bulletin types: PB = Product Bulletin; PB-IB = Product & Instruction Bulletin; IB = Instruction Bulletin Subject Type Bulletin No. 3M Light Mat PB M Light Enhancement Film PB M Light Management Films -3M Blockout Films B, B -3M Diffuser Films , M Day/Night Films PB M Graphics Market Center Warranty Brochure 3M is a trademark of 3M Company. go to Warranties Installation Bulletin

8 Bulletin Change Summary Release B: Clarified 3M product numbering scheme. Updated Warnings on Pages 1 and 3. Added an Electrical Rating table to page 2. Added information regarding Power Supplies and moved section to page 3. updated information in Wiring Diagram on page 5. Added FCC compliance information to page 5. Release C: Information was added about using the ferrite that is supplied with Advance Power Supply LEDINTA0024V41FO. The section titled Power Supplies has been expanded to include UL required information. Release D: Added more detail regarding UL recognized components in regards to retrofitting and power supplies. Light Management Solutions from Commercial Graphics Division 3M Center, Building E-04 PO Box St. Paul, MN USA Technical Info M All rights reserved. Installation Bulletin

Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.

Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation. LED Tube Lamp (Linear Fluorescent Replacement) Retrofit Installation Instructions The product package includes the following components: 1. Integral LED Lamp (1 unit) 2. Fixture Warning Label (1 - self-adhesive)

More information

Cold Deck Canopy and Shelf Lights and Retrofit Kit

Cold Deck Canopy and Shelf Lights and Retrofit Kit PAGE 1 OF 8 General Information Cold Deck LED lighting systems are intended for use inside of commercial refrigerated display merchandisers for food zone, splash zone, and non-food zones only. Cold Deck

More information

Cold Deck FIT. Canopy and Shelf Lights and Retrofit Kit. Installation Guide for General Information. Tools and Accessories Recommended

Cold Deck FIT. Canopy and Shelf Lights and Retrofit Kit. Installation Guide for General Information. Tools and Accessories Recommended General Information Cold Deck FIT LED lighting systems are intended for use inside of commercial refrigerated display merchandisers for food zone, splash zone, and non-food zones only. Cold Deck FIT LED

More information

Tetra MAX. LED Lighting System. BEFORE YOU BEGIN Read these instructions completely and carefully. Installation Guide

Tetra MAX. LED Lighting System. BEFORE YOU BEGIN Read these instructions completely and carefully. Installation Guide Tetra MAX LED Lighting System Installation Guide Volt GEMXRD-W, GEMXHRD-W, GEMXGL-W, GEMXBL-W, GEMXYG-W BEFORE YOU BEGIN Read these instructions completely and carefully. RISK OF ELECTRIC SHOCK Turn power

More information

Innovative Lighting R-Series Vertical Refrigeration

Innovative Lighting R-Series Vertical Refrigeration Installation Guide Innovative Lighting R-Series Vertical Refrigeration Door LED Conversionn Kits For Commercial Refrigerators and Freezers BEFORE YOU BEGIN INSTALLATION Read these instructions carefully.

More information

Innovative Lighting R-Series Overhead LED Conversion Kits

Innovative Lighting R-Series Overhead LED Conversion Kits Installation Guide Innovative Lighting R-Series Overhead LED Conversion Kits For Commercial Walk-In Coolers and Freezers BEFORE YOU BEGIN INSTALLATION Read these instructions carefully. Failure to follow

More information

Innovative Lighting R-Series Horizontal Case Canopy LED Conversion Kits

Innovative Lighting R-Series Horizontal Case Canopy LED Conversion Kits Installation Guide Innovative Lighting R-Series Horizontal Case Canopy LED Conversion Kits For Commercial Refrigerated Multi-Deck Display Cases BEFORE YOU BEGIN INSTALLATION Read these instructions carefully.

More information

LED IMPORTANT SAFETY INSTRUCTIONS

LED IMPORTANT SAFETY INSTRUCTIONS LED IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION To reduce the risk of death, personal injury or property damage

More information

3M Benchtop Air Ionizer 963E. User s Guide

3M Benchtop Air Ionizer 963E. User s Guide 3M Benchtop Air Ionizer 963E User s Guide 1 Table of Contents Section Page Safety Information...3 1. Description...4 2. Performance...4 3. Power Requirements...4 4. Installation...4 5. Operation...5 6.

More information

SLOT PSW LED IMPORTANT SAFETY INSTRUCTIONS

SLOT PSW LED IMPORTANT SAFETY INSTRUCTIONS SLOT PSW LED IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION To reduce the risk of death, personal injury or property

More information

Installation Instructions Lithonia Lighting Clean Room Troffer. Grid & Sheet Rock Installation, Maintenance

Installation Instructions Lithonia Lighting Clean Room Troffer. Grid & Sheet Rock Installation, Maintenance Installation Instructions Clean Room Troffer Grid & Sheet Rock Installation, Maintenance Revision 00 I-SRTL Revision Date 8/14/2017 LED IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS!

More information

Non-Programmable Digital Thermostat

Non-Programmable Digital Thermostat OWNER'S MANUAL MODEL P474-0140 Non-Programmable Digital Thermostat HEAT PUMP THERMOSTAT 2 HEAT, 1 COOL emergency aux. heat normal energy save Fan On Fan Auto Millivolt Compatible Battery or System Powered

More information

MaxLite LED Round Pendant Highbay Series

MaxLite LED Round Pendant Highbay Series General Safety Information To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warnings and instructions

More information

Universal Fan and Light Remote Control

Universal Fan and Light Remote Control Universal Fan and Light Remote Control Hand-Held Remote and Wall Cradle Owner s Guide and Installation Manual English Form# 41316-01 20100930 2010 Hunter Fan Co. 1 Welcome Table of Contents Read and Save

More information

DHL-LP-LED Low Profile LED Linear High/Low Bay

DHL-LP-LED Low Profile LED Linear High/Low Bay IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards please read all warnings and instructions

More information

Honeywell Durafit LED Retrofit Kit

Honeywell Durafit LED Retrofit Kit Honeywell Durafit LED Retrofit Kit INSTALLATION INSTRUCTIONS LED RETROFIT LUMINAIRE CONVERSION FOR USE ONLY WITH PRODUCTS DESCRIBED AND INSTALLED IN ACCORDANCE WITH THE INSTRUCTIONS PROVIDED WITH THIS

More information

LED IMPORTANT SAFETY INSTRUCTIONS

LED IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION To reduce the risk of death, personal injury or property damage from fire, electric shock, falling

More information

LED CEILING LIGHT WITH MOTION SENSOR AND REMOTE. ITM. / ART Model: LM56123 CARE & USE INSTRUCTIONS

LED CEILING LIGHT WITH MOTION SENSOR AND REMOTE. ITM. / ART Model: LM56123 CARE & USE INSTRUCTIONS LED CEILING LIGHT WITH MOTION SENSOR AND REMOTE ITM. / ART. 1165831 Model: LM56123 CARE & USE INSTRUCTIONS IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY For assistance with assembly or installation,

More information

Dioluce Products Installation Instructions

Dioluce Products Installation Instructions Dioluce Products Installation Instructions Models DL-R24-4530-5K0-001 DL-R24-4530-5K0-002 DL-R24-5035-5K0-001 DL-R24-5035-5K0-002 DL-R24-4530-4K0-001 DL-R24-4530-4K0-002 DL-R24-5035-4K0-001 DL-R24-5035-4K0-002

More information

Cold Door 2 LED Retrofit Kit Lighting System

Cold Door 2 LED Retrofit Kit Lighting System PAGE 1 OF 6 General Information Cold Door 2 is intended for use inside commercial refrigeration cases with packed foods only. Cold Door 2 LED luminaire should only be used with SloanLED 100 Watt 24 VDC

More information

HighLINER 2. General Information: FOR YOUR SAFETY. Installation Guide for C1I75, L1C1I75, C2I75, L135C2I75

HighLINER 2. General Information: FOR YOUR SAFETY. Installation Guide for C1I75, L1C1I75, C2I75, L135C2I75 General Information: is intended for linear lighting in storerooms, walk-in coolers, indoor and outdoor soffits, outdoor canopies, car washes, and a variety of other lighting applications. Do not mount

More information

ASG EZ-9000GR Tape Dispenser User Manual ASG #66136

ASG EZ-9000GR Tape Dispenser User Manual ASG #66136 ASG EZ-9000GR Tape Dispenser ASG #66136 Revision Date: 03/27/18 1 Read Before Use Warnings and Cautions The safety guidelines in this instruction manual must be observed in order to prevent injury to the

More information

Installation Instructions

Installation Instructions Installation Instructions Ordering Code: RF16UQT1XXC RF32UQT1XXC RF32UHT1XX RF45UQT1XXC RF45UHT1XX PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION OF THE FOLLOWING: 4 STRIP FIXTURES 8 STRIP FIXTURES

More information

MLLG-DE-LED-CHAN Installation Guide IMPORTANT SAFETY INSTRUCTIONS

MLLG-DE-LED-CHAN Installation Guide IMPORTANT SAFETY INSTRUCTIONS MLLG-DE-LED-CHAN Installation Guide IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards

More information

LED IMPORTANT SAFETY INSTRUCTIONS

LED IMPORTANT SAFETY INSTRUCTIONS LED IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION To reduce the risk of death, personal injury or property damage

More information

SECTION INTERIOR LIGHTING

SECTION INTERIOR LIGHTING SECTION 26 51 00 INTERIOR LIGHTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

1 x4 Dimmable LED RetroFits

1 x4 Dimmable LED RetroFits 1 x4 Dimmable LED RetroFits Installation Instructions Ordering Code: RF16UQT1XXCDL RF16UHT1XXDL RF32UQT1XXCDL RF32UHT1XXDL PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION OF THE FOLLOWING: 4 STRIP FIXTURES

More information

Installation and Operation Manual Low Power (LP) DC Power System

Installation and Operation Manual Low Power (LP) DC Power System Installation and Operation Manual Low Power (LP) DC Power System LPS Power Enclosure LPB Battery Enclosure 2051259 R3 Information in this document is subject to change without notice and does not represent

More information

INSTALLATION INSTRUCTIONS MODEL PA-250 AND PA-500 BOOSTER AMPLIFIER

INSTALLATION INSTRUCTIONS MODEL PA-250 AND PA-500 BOOSTER AMPLIFIER 273 Branchport Avenue Long Branch, N.J. 07740 (908) 222-6880 INSTALLATION INSTRUCTIONS MODEL PA-250 AND PA-500 BOOSTER AMPLIFIER GENERAL: The Series PA-250 and PA-500 Watt Booster Amplifiers are designed

More information

YP7999A1000 ControLinks Fuel Air Ratio Control Panel

YP7999A1000 ControLinks Fuel Air Ratio Control Panel YP7999A1000 ControLinks Fuel Air Ratio Control Panel FEATURES INSTALLATION INSTRUCTIONS Pre-wired and ready to install Includes the R7999A control, wiring subbase and S7999D1048 touchscreen display Commission,

More information

LED IMPORTANT SAFETY INSTRUCTIONS

LED IMPORTANT SAFETY INSTRUCTIONS LED IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION To reduce the risk of death, personal injury or property damage

More information

ITEM # SAIL STREAM CEILING FAN MODEL #41695

ITEM # SAIL STREAM CEILING FAN MODEL #41695 ITEM #1133114 SAIL STREAM CEILING FAN MODEL #41695 Harbor Breeze is a registered trademark of LF, LLC. All Rights Reserved. Español p. 18 ATTACH YOUR RECEIPT HERE Purchase Date Questions, problems, missing

More information

Carbon Heating Film. Failure to follow these instructions may result in fire, electrical shock, property damage, personal injury, or death.

Carbon Heating Film. Failure to follow these instructions may result in fire, electrical shock, property damage, personal injury, or death. Carbon Heating Film Easy to install. Does not circulate pollutants, dust, dirt, allergens or dry air. May be installed on wall, ceiling, under laminate, engineered wood floors or tile. Brings soothing

More information

INSTALLATION INSTRUCTIONS WARNINGS AND INSTRUCTIONS FOR LUMINAIRES

INSTALLATION INSTRUCTIONS WARNINGS AND INSTRUCTIONS FOR LUMINAIRES INSTALLATION INSTRUCTIONS WARNINGS AND INSTRUCTIONS FOR LUMINAIRES Philips Lighting North America Philips Lighting Canada Ltd. Corporation 281 Hillmount Road, 200 Franklin Square Drive, Markham ON, Canada

More information

ITEM # , CARATUK RIVER CEILING FAN MODEL #40046, 40303

ITEM # , CARATUK RIVER CEILING FAN MODEL #40046, 40303 ITEM #0833928, 0807428 CARATUK RIVER CEILING FAN MODEL #40046, 40303 Harbor Breeze is a registered trademark of LF, LLC. All Rights Reserved. Español p. 21 ATTACH YOUR RECEIPT HERE Purchase Date Questions,

More information

Installation Instructions

Installation Instructions Model Air Conditioning & Heating Heat Pump 5+2 Day Programmable Digital Thermostat Control up to 2-Heat & 1-Cool Battery or System Powered Auxiliary Heat Indicator Fahrenheit or Celsius Service Filter

More information

programmable control model installation and setup guide M /11/ Hunter Fan Company

programmable control model installation and setup guide M /11/ Hunter Fan Company programmable control model 99107 installation and setup guide installation Prior to installation, download the app to ensure phone compatibility: Visit your app store and search simpleconnect to find the

More information

ARMITAGE CEILING FAN ITEM # MODEL #CC52WW5L. Español p. 17 ATTACH YOUR RECEIPT HERE. Purchase Date

ARMITAGE CEILING FAN ITEM # MODEL #CC52WW5L. Español p. 17 ATTACH YOUR RECEIPT HERE. Purchase Date ITEM #0807426 ARMITAGE CEILING FAN MODEL #CC52WW5L Harbor Breeze is a registered trademark of LF, LLC. All Rights Reserved. Español p. 17 ATTACH YOUR RECEIPT HERE Purchase Date 4009654 Questions, problems,

More information

Model: EF34. Owner's Guide & Installation Manual

Model: EF34. Owner's Guide & Installation Manual Owner's Guide & Installation Manual WARNING: Read this manual before using this product. Failure to follow the instructions and safety precautions in this manual can result in damage to property, serious

More information

Installation Instructions

Installation Instructions Installation Instructions 30 Electric Cooktop JP340, JP350, JP930, JP93, JP938, JP939 If you have questions, call 800.GE.CARES or visit our website at: www.geappliances.com BEFORE YOU BEGIN Read these

More information

INSTALLATION INSTRUCTIONS FOR 9330F4552 FREE DELIVERY PLENUM KITS

INSTALLATION INSTRUCTIONS FOR 9330F4552 FREE DELIVERY PLENUM KITS RV Products Division INSTALLATION INSTRUCTIONS FOR 9330F4552 FREE DELIVERY PLENUM KITS 8330-752 CONTROL BOX KIT (12 VDC COOL ONLY) 9330C755 CONTROL BOX KIT (12 VDC HEAT READY) 8530-750 CONTROL BOX KIT

More information

Sundance Spas SPA EQUIPMENT SYSTEM. Installation Instructions. P/N Rev. A

Sundance Spas SPA EQUIPMENT SYSTEM. Installation Instructions. P/N Rev. A Sundance Spas SPA EQUIPMENT SYSTEM Installation Instructions P/N 6530-456 Rev. A Contents Important Notices 1 Important Safety Instructions 2 Where to Place the Equipment System 3 Connecting Pipes Between

More information

3 Scotch Mini-Weld Adhesive System User s Manual

3 Scotch Mini-Weld Adhesive System User s Manual 3 Scotch Mini-Weld Adhesive System User s Manual The Scotch Mini-Weld Adhesive System Includes The items shown below: Contents of User s Manual Ordering Replacement Parts... 1 Important Safety Information...

More information

ITEM # HYDRA CEILING FAN MODEL #41371

ITEM # HYDRA CEILING FAN MODEL #41371 ITEM #0883783 HYDRA CEILING FAN MODEL #41371 Harbor Breeze is a registered trademark of LF, LLC. All Rights Reserved. Español p. 20 ATTACH YOUR RECEIPT HERE Purchase Date Questions, problems, missing parts?

More information

ITEM # , , PAWTUCKET CEILING FAN MODEL #40958, 40959, 40047

ITEM # , , PAWTUCKET CEILING FAN MODEL #40958, 40959, 40047 ITEM #0803775, 0721899, 0807427 PAWTUCKET CEILING FAN MODEL #40958, 40959, 40047 Harbor Breeze is a registered trademark of LF, LLC. All Rights Reserved. Español p. 20 ATTACH YOUR RECEIPT HERE Serial Number

More information

FloorHeat Installation Manual

FloorHeat Installation Manual FloorHeat Installation Manual Transforming frosty floor surfaces into radiant warmth Transforming frosty floor surfaces into radiant warmth Contents Important Instructions!... 3 Safety Instructions:...

More information

LED IMPORTANT SAFETY INSTRUCTIONS

LED IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION To reduce the risk of death, personal injury or property damage from fire, electric shock, falling

More information

Installation Instructions. For the 18 Built-In Dishwasher and Front Color Panels

Installation Instructions. For the 18 Built-In Dishwasher and Front Color Panels Installation Instructions For the 18 Built-In Dishwasher and Front Color Panels Printed in USA 154232102 Before You Begin DO NOT INSTALL DISHWASHER UNTIL YOU HAVE READ ALL INSTRUCTIONS. FOR YOUR SAFETY,

More information

ITEM # BUILDER S SERIES CEILING FAN MODEL #41391

ITEM # BUILDER S SERIES CEILING FAN MODEL #41391 Harbor Breeze Harb or Breeze ITEM #0915543 BUILDER S SERIES CEILING FAN MODEL #41391 Harbor Breeze is a registered trademark of LF, LLC. All Rights Reserved. Español p. 18 ATTACH YOUR RECEIPT HERE Purchase

More information

Public Safety DAS Annunciator Panel

Public Safety DAS Annunciator Panel Public Safety DAS Annunciator Panel 120 VAC Models: 1221-A, 1221-B, 1221-C Revision D 91117 48 VDC Models: 1221-A-48, 1221-B-48, 1221-C-48 24 VDC Models: 1221A-24, 1221-B-24, 1221-C-24 CAUTION: (Read This

More information

DRC12FR DRC12FR347. Dynalite. Install Guide

DRC12FR DRC12FR347. Dynalite. Install Guide DRC12FR DRC12FR347 Dynalite Install Guide Contents 1 Important Safety Information 2 Overview 3 Installation Installations Overview Tools List Location and Clearances Mounting the Cabinet Connecting Line

More information

INSTALLATION GUIDE Induction Cooktops

INSTALLATION GUIDE Induction Cooktops INSTALLATION GUIDE Induction Cooktops Contents Wolf Induction Cooktops....................... 3 Induction Cooktop Specifications................ 4 Induction Cooktop Installation.................. 12 Service

More information

Installation Instructions

Installation Instructions Installation Instructions 30 Electric Cooktop JP346, JP356, PP9, PP93, PP94, PP945, PP950 If you have questions, call 800.GE.CARES or visit our website at: ge.com BEFORE YOU BEGIN Read these instructions

More information

Silicone Rubber Heating Tape with Adjustable Thermostat Control (HSTAT Series) Instruction Manual

Silicone Rubber Heating Tape with Adjustable Thermostat Control (HSTAT Series) Instruction Manual Silicone Rubber Heating Tape with Adjustable Thermostat Control (HSTAT Series) Instruction Manual Read and understand this material before operating or servicing these heating tapes. Failure to understand

More information

WATLOW IND. WATROD Circulation Heater Installation & Maintenance Manual I&M NUMBER: Page: 1 Date: 6/11/2008 Rev: 2.00

WATLOW IND. WATROD Circulation Heater Installation & Maintenance Manual I&M NUMBER: Page: 1 Date: 6/11/2008 Rev: 2.00 I&M NUMBER: 316-42-5-1 Page: 1 Pre Installation Check to make sure that heater received is the same as that ordered. Watlow heaters are built to comply with UL and CSA dielectric requirements, it may be

More information

LED IMPORTANT SAFETY INSTRUCTIONS

LED IMPORTANT SAFETY INSTRUCTIONS LED IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION To reduce the risk of death, personal injury or property damage

More information

1. Distribution panelboards. 2. Lighting and appliance branch-circuit panelboards. 3. Load centers.

1. Distribution panelboards. 2. Lighting and appliance branch-circuit panelboards. 3. Load centers. September 2012, rev. 00 26 2416 Panelboards PART 1. GENERAL 1.01 Summary A. Section includes: 1.02 Definitions 1. Distribution panelboards. 2. Lighting and appliance branch-circuit panelboards. 3. Load

More information

LED IMPORTANT SAFETY INSTRUCTIONS

LED IMPORTANT SAFETY INSTRUCTIONS LED IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION To reduce the risk of death, personal injury or property damage

More information

I-320 SERIES AC EMERGENCY LIGHTING EQUIPMENT

I-320 SERIES AC EMERGENCY LIGHTING EQUIPMENT P.O. BOX 84 TUCSON, AZ 85734 (520) 294-3292 FAX (520) 74-2837 www.iotaengineering.com INSTRUCTION MANUAL IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be

More information

IMPORTANT SAFETY INSTRUCTIONS:

IMPORTANT SAFETY INSTRUCTIONS: Online: www.ballarddesigns.com PRODUCT NAME: Stella Faceted Pendant ITEM NUMBER: LR007 DIMENSIONS OF ITEM ASSEMBLED: 13.5 D x 16.5 H IMPORTANT SAFETY INSTRUCTIONS: -A licensed professional electrician

More information

Square D Clipsal Outdoor Light-Level Sensor

Square D Clipsal Outdoor Light-Level Sensor Square D Clipsal Outdoor Light-Level Sensor SLC5031PEWP for Use with C-Bus Wired Networks Instruction Bulletin Retain for future use. Square D Clipsal Outdoor Light-Level Sensor 63249-420-231A3 Instruction

More information

FV-11VQL6. Thank you for purchasing this Panasonic product Back cover FV-15VQL6

FV-11VQL6. Thank you for purchasing this Panasonic product Back cover FV-15VQL6 FV-08VQL6 FV-15VQL6 FV-11VQL6 2-3 5 5 6-8 FV-08VQL6 FV-11VQL6 11 Back cover Back cover Back cover FV-15VQL6 Thank you for purchasing this Panasonic product. For Your Safety To reduce the risk of injury,

More information

LED IMPORTANT SAFETY INSTRUCTIONS

LED IMPORTANT SAFETY INSTRUCTIONS LED IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION To reduce the risk of death, personal injury or property damage

More information

INSTALLATION INSTRUCTIONS FOR 6532 SERIES PACKAGE HEAT PUMP

INSTALLATION INSTRUCTIONS FOR 6532 SERIES PACKAGE HEAT PUMP INSTALLATION INSTRUCTIONS FOR 6532 SERIES PACKAGE HEAT PUMP RV Products A Division of Airxcel, Inc. P.O. Box 4020 Wichita, KS 67204 1976-360 (1-02) PP TABLE OF CONTENTS 1. Warnings......................................................

More information

LED IMPORTANT SAFETY INSTRUCTIONS

LED IMPORTANT SAFETY INSTRUCTIONS LED IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION To reduce the risk of death, personal injury or property damage

More information

130"ElectricCooktop. nstructlons _,0, JP355, JP910, JP930, JP940, JP950. I Iinstallation. -&WARNING - This appliance must be properly grounded.

130ElectricCooktop. nstructlons _,0, JP355, JP910, JP930, JP940, JP950. I Iinstallation. -&WARNING - This appliance must be properly grounded. I Iinstallation 130"ElectricCooktop nstructlons _,0, JP355, JP910, JP930, JP940, JP950 I r_ www.geappliances.com",,if you have questions, call 800.GE.CARES or visit our website at: I BEFORE YOU BEGIN MATERIALS

More information

MaxLite LED Vapor Tight Linear Fixture

MaxLite LED Vapor Tight Linear Fixture General Safety Information To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warnings and instructions

More information

Underwood Heater Installation Manual

Underwood Heater Installation Manual Underwood Heater Installation Manual Contents Important Safeguards and Warnings... 3 1 General Information... 3 1.1 Use of the Manual... 3 1.2 Safety Guidelines... 3 1.3 Remember to measure resistance...

More information

Room Sensor for BACnet VAV Actuator

Room Sensor for BACnet VAV Actuator BACnet VAV Actuator Room Sensor Installation Manual IM 1038 Group: Controls Part Number: IM 1038 Date: 3/4/2010 Supersedes: New Room Sensor for BACnet VAV Actuator Model(s): 2508031 & 2508032 2010 McQuay

More information

CONTENTS DESCRIPTION UNPACKING DIMENSIONS

CONTENTS DESCRIPTION UNPACKING DIMENSIONS INSTALLATION INSTRUCTIONS Ventilating Fan ModelNo.FV-08VRE CONTENTS GENERAL SAFETY INFORMATION DESCRIPTION UNPACKING SUPPLIED ACCESSORIES DIMENSIONS WIRING DIAGRAM INSTALLATION (BETWEEN JOISTS MOUNTING)

More information

Owner s Manual Use with most Heat Pump systems: 1-Heat, 1-Cool 2-Heat, 1-Cool

Owner s Manual Use with most Heat Pump systems: 1-Heat, 1-Cool 2-Heat, 1-Cool Owner s Manual Model S1-THEH21NS HVAC SERVICE PARTS TM Heat Pump Non- Programmable Digital T h e rm ostats t a t Use with most Heat Pump systems: 1-Heat, 1-Cool 2-Heat, 1-Cool Control up to 2-Heat & 1-Cool

More information

Static Eliminators. Overhead Ionizing Blower Model IN5130. Instruction Manual

Static Eliminators. Overhead Ionizing Blower Model IN5130. Instruction Manual Static Eliminators Overhead Ionizing Blower Model IN5130 Instruction Manual 1 Description Contents Model IN5130 1 About Ptec Technology 1 Features 1 Power Requirements 2 2 Operation and Use Environmental

More information

! The Caution Symbol (exclamation point) alerts you to a "CAUTION", a safety or

! The Caution Symbol (exclamation point) alerts you to a CAUTION, a safety or I&M NUMBER: 316-42-10-1 Page: 1 Pre Installation Check to make sure that heater received is the same as that ordered. Elements may come in contact with each other during shipment. Minor adjustments to

More information

Always make sure to check the heating film before, during, and after installation of the floor covering.

Always make sure to check the heating film before, during, and after installation of the floor covering. Installation of floor heating film for ceramic tiles, granite and other stone or composite flooring Read through this entire manual before starting installation. All electrical connections must be made

More information

180 Degree Ceiling Mounted Occupancy Sensors

180 Degree Ceiling Mounted Occupancy Sensors Instruction Bulletin 63249-420-386A 2/202 80 Degree Ceiling Mounted Occupancy Sensors PS-CDS800 and PS-CUS800 INTRODUCTION The 80 Degree Ceiling Mount Occupancy Sensors are ideal for use in business and

More information

IMPORTANT SAFETY INSTRUCTIONS:

IMPORTANT SAFETY INSTRUCTIONS: PRODUCT NAME: Hadley 4 Light Pendant ITEM NUMBER: LC813 DIMENSIONS OF ITEM ASSEMBLED: Small: 18 1/2 H x 11 Square Large: 25 H x 16 Square IMPORTANT SAFETY INSTRUCTIONS: -A licensed professional electrician

More information

WATLOW ELECTRIC MFG CO. FIREBAR Screw Plug Installation & Maintenance Manual I&M NUMBER: Page: 1 Date: 11/25/2013 Rev: 4.

WATLOW ELECTRIC MFG CO. FIREBAR Screw Plug Installation & Maintenance Manual I&M NUMBER: Page: 1 Date: 11/25/2013 Rev: 4. I&M NUMBER: 316-42-3-1 Page: 1 Pre Installation Check to make sure that heater received is the same as that ordered. Elements may come in contact with each other during shipment. Minor adjustments to elements

More information

48 TAYLOR CEILING FAN

48 TAYLOR CEILING FAN 48 TAYLOR CEILING FAN Owner s Manual Models #20554 If a problem cannot be remedied or you are experiencing difficulty in installation, please contact the Service Department: 1-877-459-3267, 9 a.m.- 5 p.m.

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Flow Lighting QuickLED NEW FIXTURE 2x4 2x2 1x4 Corporate 1240 Texan Trail, Suite 102 Grapevine, TX 76051 (817)435-8484 Office www.flowledlighting.com READ AND FOLLOW ALL SAFETY

More information

OPERATING MANUAL Gfp 255C Please read this manual carefully before operating!

OPERATING MANUAL Gfp 255C Please read this manual carefully before operating! OPERATING MANUAL Gfp 255C Please read this manual carefully before operating! Unpacking, assembly, and operating videos are available at www.gfpsmoothstart.com 1 Table of Contents Gfp 255C March 2015 Contents

More information

Owner s Manual. Filterless UV Air Purifier. This Manual Includes:

Owner s Manual. Filterless UV Air Purifier. This Manual Includes: Filterless UV Air Purifier Item No. 203758 Owner s Manual This Manual Includes: Warranty Safety Warnings Operating Instructions Replacement Directions Troubleshooting Tips Cleaning and Maintenance Tips

More information

Labeling to Article 690 of the National Electrical Code Routing and Protecting PV Cables

Labeling to Article 690 of the National Electrical Code Routing and Protecting PV Cables Labeling to Article 690 of the National Electrical Code Routing and Protecting PV Cables Article 690 labeling requirements from the NEC 2011 Edition General overview of industry labeling Labeling updates

More information

A. Furnish and install wiring devices and plates as specified herein and as shown on the Drawings.

A. Furnish and install wiring devices and plates as specified herein and as shown on the Drawings. DIVISION 26 ELECTRICAL SECTION 26 27 26 PART 1 GENERAL 1.01 DESCRIPTION A. Furnish and install wiring devices and plates as specified herein and as shown on the Drawings. B. Specialty switches and outlets

More information

WATLOW IND. WATROD Flange Heater Installation & Maintenance Manual I&M NUMBER: Page: 1 Date:6/11/2008 Rev: 2.00

WATLOW IND. WATROD Flange Heater Installation & Maintenance Manual I&M NUMBER: Page: 1 Date:6/11/2008 Rev: 2.00 I&M NUMBER: 316-42-8-1 Page: 1 _ Pre Installation Check to make sure that heater received is the same as that ordered. Elements may come in contact with each other during shipment. Minor adjustments to

More information

Manual Feed Slot Opening. Wastebin. Credit Card Casters

Manual Feed Slot Opening. Wastebin. Credit Card Casters Model# AF300 Contents Product Diagram & Technical Specifications... 3 Warnings... 4 Installation / Safety Instructions... 5 Assembly... 6 Operation... 6-8 Care & Maintenance... 8 Troubleshooting... 9 Warranty,

More information

SECTION AUTOMATIC TRANSFER SWITCHES PART 1 - GENERAL

SECTION AUTOMATIC TRANSFER SWITCHES PART 1 - GENERAL SECTION 16400 AUTOMATIC TRANSFER SWITCHES 1.01 RELATED DOCUMENTS PART 1 - GENERAL A. Drawings and general provisions of Contract, including General Conditions and Division 1 Specification sections, apply

More information

Quartzone. Infrared Quartz Tube & Metal Sheathed Electric Heaters. Owner s Manual. File E COMFORT HEATERS for INDOOR* and OUTDOOR** USE

Quartzone. Infrared Quartz Tube & Metal Sheathed Electric Heaters. Owner s Manual. File E COMFORT HEATERS for INDOOR* and OUTDOOR** USE Quartzone Infrared Quartz Tube & Metal Sheathed Electric Heaters Owner s Manual File E97759 COMFORT S for INDOOR* and OUTDOOR** USE *Excluding Residences ** With Quartz Elements and when mounted Underneath

More information

ST. KITTS CEILING FAN

ST. KITTS CEILING FAN ITEM #0845047 ST. KITTS CEILING FAN MODEL #40829 Questions, problems or missing parts? Before returning this item to your retailer, call our customer service department at 1-800-643-0067, Monday - Thursday,

More information

WATLOW IND. FIREBAR Flange Heater Installation & Maintenance Manual I&M NUMBER: Page: 1 Date: 6/11/2008 Rev: 2.00

WATLOW IND. FIREBAR Flange Heater Installation & Maintenance Manual I&M NUMBER: Page: 1 Date: 6/11/2008 Rev: 2.00 I&M NUMBER: 316-42-2-1 Page: 1 Pre Installation Check to make sure that heater received is the same as that ordered. Elements may come in contact with each other during shipment. Minor adjustments to elements

More information

Owner s Manual. Digital Thermostat. Non-Programmable

Owner s Manual. Digital Thermostat. Non-Programmable Model Air Conditioning & Heating Non-Programmable Digital Thermostat 1-Heat & 1-Cool Gas/Electric Heat Pump Battery or System Powered Fahrenheit or Celsius Fully Electronic Owner s Manual Thank goodness

More information

Please Keep This Manual For Future Reference REV.01

Please Keep This Manual For Future Reference REV.01 ELCG347 ELCG240 1-855-571-1044 Please Keep This Manual For Future Reference REV.01 IMPORTANT INFORMATION When using electrical appliances, basic precautions should always be followed to reduce the risk

More information

MaxLite LED MICRO-T PANEL

MaxLite LED MICRO-T PANEL ` Installation Instructions General Safety Information To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all

More information

INSTALLATION INSTRUCTIONS AND OWNER S MANUAL FOR

INSTALLATION INSTRUCTIONS AND OWNER S MANUAL FOR INSTALLATION INSTRUCTIONS AND OWNER S MANUAL FOR ELECTRIC ON-DEMAND TANKLESS WATER HEATERS: SpecAdvantage with PhD Technology SafeAdvantage with PhD Technology 208 and 480 VAC three phase 32 144 kw 600

More information

Operation and Maintenance Manual for the SODRTEK ST 400 Radiant Pre-Heating System P/N

Operation and Maintenance Manual for the SODRTEK ST 400 Radiant Pre-Heating System P/N Operation and Maintenance Manual for the SODRTEK ST 400 Radiant Pre-Heating System P/N 5050-0540 TITLE PAGE General Information...3 Introduction...3 Specifications...3 Physical Parameters...3 Parts Identification...4

More information

FOSTORIA INDUSTRIES, INC North Main Street Fostoria, OH Phone: Fax:

FOSTORIA INDUSTRIES, INC North Main Street Fostoria, OH Phone: Fax: A DIVISION OF FOSTORIA INDUSTRIES, INC. 1200 North Main Street Fostoria, OH 44830-1911 Phone: 800-495-4525 Fax: 419-435-0842 www.fostoriaindustries.com VHC-32 Variable Heat Controller for 222 MUL-T-MOUNT

More information

52 CEILING FAN. Owner s Manual Models #50336, 50337

52 CEILING FAN. Owner s Manual Models #50336, 50337 52 CEILING FAN Owner s Manual Models #50336, 50337 If a problem cannot be remedied or you are experiencing difficulty in installation, please contact the Service Department: 1-877-706-3267, 9 a.m.- 5 p.m.

More information

ITEM # SAIL STREAM CEILING FAN MODEL #40048

ITEM # SAIL STREAM CEILING FAN MODEL #40048 ITEM #0609448 SAIL STREAM CEILING FAN MODEL #40048 Harbor Breeze is a registered trademark of LF, LLC. All Rights Reserved. Español p. 19 ATTACH YOUR RECEIPT HERE Purchase Date Questions, problems, missing

More information

HDCVI PTZ Camera. 6C Series. Quick Start Guide Version Dahua Technology USA Inc.

HDCVI PTZ Camera. 6C Series. Quick Start Guide Version Dahua Technology USA Inc. HDCVI PTZ Camera 6C Series Quick Start Guide Version 001.002 Dahua Technology USA Inc. Table of Contents 1 Welcome... 1 1.1 Important Safeguards and Warnings... 1 Electrical safety... 1 Environmental Precautions...

More information

INSTALLATION INSTRUCTIONS FOR 6636 SERIES PACKAGE AIR CONDITIONER

INSTALLATION INSTRUCTIONS FOR 6636 SERIES PACKAGE AIR CONDITIONER INSTALLATION INSTRUCTIONS FOR 6636 SERIES PACKAGE AIR CONDITIONER TABLE OF CONTENTS 1. Warnings...................................................... 3 2. Component Match-Up...........................................

More information

DXP-PB-2-8 Manual 8 Par-Bake & Form Dough Press

DXP-PB-2-8 Manual 8 Par-Bake & Form Dough Press DXP-PB-2-8 Manual 8 Par-Bake & Form Dough Press OWNER S MANUAL For Customer Service, Call 1-800-835-0606 ext. 205 or Visit www.doughxpress.com CONTENTS Receiving & Setup...2 Operation...3 Pressing Dough...3-4

More information