PROGRAMUL DE STANDARDIZARE NAŢIONALĂ PE ANUL 2018 actualizarea I

Transcription

1 PROGRAMUL DE STANDARDIZARE NAŢIONALĂ PE ANUL 2018 actualizarea I SECTIUNEA 1, CAPITOLUL 1 Standarde europene propuse a se adopta ca standarde române prin publicarea versiunii române SECTIUNEA 1, CAPITOLUL 2 Standarde europene propuse a se adopta ca standarde române prin publicarea notei de confirmare SECTIUNEA 2 Standarde europene armonizate propuse a se adopta ca standarde române prin publicarea versiunii române SECTIUNEA 3, CAPITOLUL 1 cu faze de vot in 2018 SECTIUNEA 3, CAPITOLUL 2 faze de vot în 2018 SECTIUNEA 4, CAPITOLUL 1 supuse procedurii de examinare SECTIUNEA 4, CAPITOLUL 2 fi elaborate Proiecte de standarde europene CEN-CENELEC Proiecte de standarde internaţionale ISO-IEC cu Standarde române originale în vigoare ce trebuie Teme de standarde române originale noi propuse a SECTIUNEA 5, CAPITOLUL 1 Standarde internaţionale ISO-IEC propuse a se adopta ca standarde române prin publicarea versiunii române SECTIUNEA 5, CAPITOLUL 2 Standarde internaţionale ISO-IEC propuse a se adopta ca standarde române prin metoda filei de confirmare Legenda 224

2 SECTIUNEA 1, CAPITOLUL 1 Standarde europene propuse a se adopta ca standarde române prin publicarea versiunii române Nr crt Minister CT Indicativ EN Titlu TC 1 UE 95 EN ISO 10273:2017 Microbiology of the food chain - Horizontal method for the detection of pathogenic Yersinia enterocolitica (ISO 10273:2017) 2 UE 95 EN ISO :2017 Microbiology of the food chain - Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. - Part 2: Enumeration method (ISO :2017) 3 UE 95 EN ISO 16654:2001/A1:2017 Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Escherichia coli O157 - Amendment 1: Annex B: Result of interlaboratory studies (ISO 16654:2001/Amd 1:2017) CEN/TC 275 CEN/TC 275 CEN/TC UE 95 EN ISO 18465:2017 Microbiology of the food chain - Quantitative determination of emetic toxin (cereulide) using LC- MS/MS (ISO 18465:2017) 5 UE 95 EN ISO 19020:2017 Microbiology of the food chain - Horizontal method for the immunoenzymatic detection of staphylococcal enterotoxins in foodstuffs (ISO 19020:2017) CEN/TC 275 CEN/TC UE 95 EN ISO :2017 Microbiology of the food chain - Horizontal method for the detection and enumeration of Enterobacteriaceae - Part 1: Detection of Enterobacteriaceae (ISO :2017) 7 UE 95 EN ISO :2017 Microbiology of the food chain - Horizontal method for the detection and enumeration of Enterobacteriaceae - Part 2: Colony-count technique (ISO :2017) CEN/TC 275 CEN/TC UE 95 EN ISO :2017 Microbiology of the food chain - Horizontal method for the determination of Vibrio spp. - Part 1: Detection of potentially enteropathogenic Vibrio parahaemolyticus, Vibrio cholerae and Vibrio vulnificus (ISO :2017) 9 UE 95 EN ISO 22964:2017 Microbiology of the food chain - Horizontal method for the detection of Cronobacter spp. (ISO 22964:2017) CEN/TC 275 CEN/TC MADR 180 EN ISO 22000:2018 Food safety management systems - Requirements for any organization in the food chain (ISO 22000:2018) CEN/SS C01 11 MAI 216 EN 3-9:2006 Portable fire extinguishers - Part 9: Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers 12 MAI 216 EN 3-9:2006/AC:2007 Portable fire extinguishers - Part 9: Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers 13 MAI 216 EN 12845:2015/AC:2016 Fixed firefighting systems - Automatic sprinkler systems - Design, installation and maintenance 14 MAI 217 EN :1999 Fire resistance tests for loadbearing elements - Part 3: Beams 15 MAI 217 EN :2016 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services CEN/TC 70 CEN/TC 70 CEN/TC 191 CEN/TC 127 CEN/TC 127

3 16 UE 217 EN ISO 13943:2017 Fire safety - Vocabulary (ISO 13943:2017) CEN/TC MAI 217 CEN/TR 16988:2016 Estimation of uncertainty in the single burning item test CEN/TC UE 52 EN 886:2004 Chemicals used for treatment of water intended for human consumption - Polyaluminium hydroxide silicate sulfate 19 UE 6 CEN/CLC/ETSI TR :2014 Documents relevant to EN "Accessibility requirements suitable for public procurement of ICT products and services in Europe" 20 UE 6 CEN/CLC/ETSI TR :2014 Guidelines on the use of accessibility award criteria suitable for public procurement of ICT products and services in Europe 21 UE 6 CEN/CLC/ETSI/TR :2014 Guidance for the application of conformity assessment to accessibility requirements for public procurement of ICT products and services in Europe 22 MDRAP 207 CEN/TR :2016 Energy performance of buildings - Part 2: Accompanying TR pren : Modules M10-4,5,6,7,8,9,10 23 MDRAP 207 EN :2017 Energy Performance of Buildings - Energy performance of buildings - Part 1: Impact of Building Automation, Controls and Building Management - Modules M10-4,5,6,7,8,9,10 24 MDRAP 207 CEN/TR :2016 Energy Performance of Buildings - Control for heating, ventilating and air-conditioning applications Part 2: Accompanying TR pren : Modules M3-5,M4-5,M MDRAP 207 EN :2017 Energy Performance of Buildings - Control for heating, ventilating and air conditioning applications - Part 1: Electronic individual zone control equipment - Modules M3-5, M4-5, M MCSI 208 EN ISO/IEC 27000:2017 Information technology - Security techniques - Information security management systems - Overview and vocabulary (ISO/IEC 27000:2016) 27 MCSI 208 EN ISO/IEC 27001:2017 Information technology - Security techniques - Information security management systems - Requirements (ISO/IEC 27001:2013 including Cor 1:2014 and Cor 2:2015) 28 MCSI 208 EN ISO/IEC 27002:2017 Information technology - Security techniques - Code of practice for information security controls (ISO/IEC 27002:2013 including Cor 1:2014 and Cor 2:2015) CEN/TC 164 CEN/CLC/ETSI /JWG eacc CEN/CLC/ETSI /JWG eacc CEN/CLC/ETSI /JWG eacc CEN/TC 247 CEN/TC 247 CEN/TC 247 CEN/TC 247 CEN/SS F12 CEN/SS F12 CEN/SS F12 29 MS 319 EN ISO 11238:2012 Health informatics - Identification of medicinal products - CEN/TC 251 Data elements and structures for the unique identification and exchange of regulated information on substances (ISO 11238:2012) 30 MS 319 EN ISO 11239:2012 Health informatics - Identification of medicinal products - CEN/TC 251 Data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms, units of presentation, routes of administration and packaging (ISO 11239:2012) 31 MS 319 EN ISO 11240:2012 Health informatics - Identification of medicinal products - CEN/TC 251 Data elements and structures for the unique identification and exchange of units of measurement (ISO 11240:2012)

4 32 MS 319 EN ISO 11615:2017 Health informatics - Identification of medicinal products - CEN/TC 251 Data elements and structures for the unique identification and exchange of regulated medicinal product information (ISO 11615:2017) 33 MS 319 EN ISO 11616:2017 Health informatics - Identification of medicinal products - CEN/TC 251 Data elements and structures for the Unique Identification and Exchange of regulated Pharmaceutical Product Information (ISO 11616:2017) 34 MDRAP 113 EN 13467:2018 Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation CEN/TC UE 113 CEN/TR 16220:2011 Construction products - Assessment of release of dangerous substances - Complement to sampling 36 UE 113 EN 16516:2017 Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air 37 UE 113 CEN/TS :2016 Construction products - Assessment of release of dangerous substances - Part 3: Horizontal up-flow percolation test 38 UE 113 CEN/TR 17105:2017 Construction products - Assessment of release of dangerous substances - Guidance on the use of ecotoxicity tests applied to construction products 39 UE 113 CEN/TR 17113:2017 Construction products - Assessment of release of dangerous substances - Radiation from construction products - Dose assessment of emitted gamma radiation 40 UE 114 EN :2017 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 5: Assessment and verification of constancy of performance, marking and labelling 41 UE 122 EN :2015 Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description 42 UE 122 EN 13541:2012 Glass in building - Security glazing - Testing and classification of resistance against explosion pressure CEN/TC 351 CEN/TC 351 CEN/TC 351 CEN/TC 351 CEN/TC 351 CEN/TC 349 CEN/TC 129 CEN/TC UE 122 EN :2013 Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description CEN/TC MDRAP 136 HD :2016/AC: Low-voltage electrical installations - Part 6: Verification CLC/TC MDRAP 136 HD :2009/A11:2017 Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations CLC/TC MDRAP 240 EN :2013 Lighting columns - Part 3-1: Design and verification - Specification for characteristic loads 47 MDRAP 240 EN :2013 Lighting columns - Part 3-2: Design and verification - Verification by testing 48 MDRAP 240 EN :2004+A1:2012 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format CEN/TC 50 CEN/TC 50 CEN/TC MDRAP 240 CEN/TR :2014 Road lighting - Part 1: Guidelines on selection of CEN/TC 169 lighting classes 50 MDRAP 240 EN :2015 Road lighting - Part 2: Performance requirements CEN/TC MDRAP 240 EN :2015 Road lighting - Part 3: Calculation of performance CEN/TC MDRAP 240 EN :2015 Road lighting - Part 4: Methods of measuring lighting CEN/TC 169 performance 53 MDRAP 240 EN :2015 Road lighting - Part 5: Energy performance indicators CEN/TC 169

5 54 MDRAP 240 CEN/TR :2017 Energy performance of buildings - Energy requirements CEN/TC 169 for lighting - Part 2: Explanation and justification of EN , Module M9 55 MDRAP 240 EN :2017 Energy performance of buildings - Energy requirements for lighting - Part 1: Specifications, Module M9 CEN/TC MM 276 EN ISO :2016 Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO :2016) 57 MM 276 EN ISO :2017 Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 1: Frame document (ISO :2017) CEN/TC 126 CEN/TC MM 276 EN ISO :2017 Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 2: Application to Type B elements when the junction has a small influence (ISO :2017) CEN/TC MM 276 EN ISO :2017 Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 3: Application to Type B elements when the junction has a substantial influence (ISO :2017) CEN/TC MM 276 EN ISO :2017 Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 4: Application to junctions with at least one Type A element (ISO :2017) CEN/TC MM 276 EN ISO :2017 Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms (ISO :2017) 62 MM 276 EN ISO :2017 Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms (ISO :2017) 63 MM 276 EN ISO :2017 Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound (ISO :2017) 64 MM 276 EN ISO :2017 Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 4: Transmission of indoor sound to the outside (ISO :2017) 65 MM 276 EN 15657:2017 Acoustic properties of building elements and of buildings - Laboratory measurement of structure-borne sound from building service equipment for all installation conditions CEN/TC 126 CEN/TC 126 CEN/TC 126 CEN/TC 126 CEN/TC MM 276 EN 16205:2013+A1:2018 Laboratory measurement of walking noise on floors CEN/TC MM 276 EN ISO :2014 Acoustics - Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up - Part 1: Heavyweight compact floor (ISO :2014) 68 MDRAP 276 EN ISO :2014/A1:2017 Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation - Amendment 1 (ISO :2014/Amd 1:2017) CEN/TC 126 CEN/TC 126

6 69 MM 276 EN ISO :2015 Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO :2015) 70 MM 276 EN ISO :2016 Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 3: Façade sound insulation (ISO :2016) CEN/TC 126 CEN/TC MM 276 EN 16487:2014 Acoustics - Test code for suspended ceilings - Sound CEN/TC 126 absorption 72 MDRAP 281 EN ISO :2015 Performance of buildings - Detection of heat, air and moisture irregularities in buildings by infrared methods - Part 3: Qualifications of equipment operators, data analysts and report writers (ISO :2015) CEN/TC MDRAP 281 EN ISO 7345:2018 Thermal performance of buildings and building components - Physical quantities and definitions (ISO 7345:2018) CEN/TC MDRAP 281 EN ISO 9972:2015 Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method (ISO 9972:2015) 75 MDRAP 281 EN ISO :2017 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO :2017) CEN/TC 89 CEN/TC MDRAP 281 EN ISO :2017 Thermal performance of windows, doors and shutters - CEN/TC 89 Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO :2017) 77 MDRAP 281 EN ISO 12570:2000/A2:2018 Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature (ISO 12570:2000/Amd 2:2018) CEN/TC MDRAP 281 EN ISO 12572:2016 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) CEN/TC MDRAP 281 EN ISO 12631:2017 Thermal performance of curtain walling - Calculation of thermal transmittance (ISO 12631:2017) CEN/TC MDRAP 281 EN ISO 13786:2017 Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO 13786:2017) 81 MDRAP 281 EN ISO 14683:2017 Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values (ISO 14683:2017) 82 MDRAP 281 EN ISO 15148:2002/A1:2016 Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion - Amendment 1 (ISO 15148:2002/Amd 1:2016) 83 MDRAP 281 EN ISO :2017 Energy performance of buildings - Sensible and latent heat loads and internal temperatures - Part 1: Generic calculation procedures (ISO :2017) CEN/TC 89 CEN/TC 89 CEN/TC 89 CEN/TC MDRAP 281 CEN ISO/TR :2017 Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 2: Explanation and justification of ISO (ISO/TR :2017) CEN/TC 89

7 85 MDRAP 281 EN ISO :2017 Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 1: Overview of options (ISO :2017) CEN/TC MDRAP 281 CEN ISO/TR :2017 Energy performance of buildings - Hygrothermal performance of building components and building elements - Part 2: Explanation and justification (ISO/TR :2017) 87 MDRAP 281 CEN ISO/TR :2017 Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 2: Explanation and justification (ISO/TR :2017) CEN/TC 89 CEN/TC MDRAP 281 EN ISO :2017 Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO :2017) CEN/TC MDRAP 281 EN ISO :2017 Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 3: Detailed calculation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO :2017) CEN/TC MDRAP 302 EN 448:2015 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene CEN/TC MDRAP 302 EN 488:2015 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene CEN/TC MDRAP 302 EN ISO 5802:2008/A1:2015 Industrial fans - Performance testing in situ (ISO 5802:2001/Amd 1:2015) 93 MDRAP 302 EN ISO :2015 Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 1: Definition, symbols, and comfort criteria (ISO :2012) CEN/TC 156 CEN/TC MDRAP 302 EN ISO :2015 Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO :2012) CEN/TC MDRAP 302 EN ISO :2015 Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 5: Installation (ISO :2012) CEN/TC MDRAP 302 EN ISO 12759:2015 Fans - Efficiency classification for fans (ISO 12759:2010, including Amd 1:2013) 97 MDRAP 302 EN :2015 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units 98 MDRAP 302 EN :2017 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use without fan CEN/TC 156 CEN/TC 156 CEN/TC MDRAP 302 EN ISO 13350:2015 Fans - Performance testing of jet fans (ISO CEN/TC :2015) 100 MDRAP 302 EN :2016 Free hanging heating and cooling surfaces for water with a temperature below 120 C - Part 2: Pre-fabricated ceiling mounted radiant panels for space heating - Test method for thermal output CEN/TC 130

8 101 MDRAP 302 EN :2016 Free hanging heating and cooling surfaces for water with a temperature below 120 C - Part 3: Prefabricated ceiling mounted radiant panels for space heating - Rating method and evaluation of radiant thermal output CEN/TC MDRAP 302 EN :2016 Free hanging heating and cooling surfaces for water with a temperature below 120 C - Part 4: Pre-fabricated ceiling mounted radiant panels - Test method for cooling capacity CEN/TC MDRAP 302 EN :2016 Free hanging heating and cooling surfaces for water with a temperature below 120 C - Part 5: Open or closed heated ceiling surfaces - Test method for thermal output 104 MDRAP 302 EN :2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating and DHW generation systems, combustion systems (boilers, biomass), Module M3-8-1, M MDRAP 302 EN :2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-5: District heating and cooling, Module M3-8-5, M4-8-5, M8-8-5, M MDRAP 302 EN :2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 5: Space heating and DHW storage systems (not cooling), Module M3-7, M MDRAP 302 CEN/TR :2017 Energy performance of buildings - Ventilation for buildings - Part 10: Interpretation of the requirements in EN Calculation methods for energy requirements of cooling systems (Module M4-1,M4-4, M4-9) - General 108 MDRAP 302 CEN/TR :2017 Energy performance of buildings - Ventilation for buildings - Part 14: Interpretation of the requirements in EN Calculation of cooling systems (Module M4-8) - Generation 109 MDRAP 302 CEN/TR :2017 Energy performance of buildings - Ventilation for buildings - Part 16: Interpretation of the requirements in EN Calculation of cooling systems (Module M4-7) - Storage 110 MDRAP 302 CEN/TR :2017 Energy performance of buildings - Ventilation for buildings - Part 18: Interpretation of the requirements in EN Guidelines for inspection of ventilation and air-conditioning systems (Modules M4-11, M5-11, M6-11, M7-11) 111 MDRAP 302 CEN/TR :2017 Energy performance of buildings - Ventilation for buildings - Part 2: Interpretation of the requirements in EN Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics (Module M1-6) CEN/TC 130 CEN/TC 228 CEN/TC 228 CEN/TC 228 CEN/TC 156 CEN/TC 156 CEN/TC 156 CEN/TC 156 CEN/TC MDRAP 302 CEN/TR :2017 Energy performance of buildings - Ventilation for buildings - Part 4: Interpretation of the requirements in EN For non-residential buildings - Performance requirements for ventilation and roomconditioning systems(modules M5-1, M5-4) CEN/TC 156

9 113 MDRAP 302 CEN/TR :2017 Energy performance of buildings - Ventilation for buildings - Part 6: Interpretation of the requirements in EN and EN Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M 6-5, M6-8, M7-5, M7-8) CEN/TC MDRAP 302 CEN/TR :2017 Energy performance of buildings - Ventilation for buildings - Part 8: Interpretation of the requirements in EN Calculation methods for the determination of air flow rates in buildings including infiltration - (Module M5-5) CEN/TC MDRAP 302 EN :2017 Energy performance of buildings - Ventilation for buildings - Part 13: Calculation of cooling systems (Module M4-8) - Generation 116 MDRAP 302 EN :2017 Energy performance of buildings - Ventilation for buildings - Part 15: Calculation of cooling systems (Module M4-7) - Storage CEN/TC 156 CEN/TC MDRAP 302 EN :2017 Energy performance of buildings - Ventilation for buildings - Part 17: Guidelines for inspection of ventilation and air conditioning systems (Module M4-11, M5-11, M6-11, M7-11) CEN/TC MDRAP 302 EN :2017 Energy performance of buildings - Ventilation for buildings - Part 3: For non-residential buildings - Performance requirements for ventilation and roomconditioning systems (Modules M5-1, M5-4) CEN/TC MDRAP 302 EN :2017 Energy performance of buildings - Ventilation for buildings - Part 5-1: Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 1: Distribution and generation CEN/TC MDRAP 302 EN :2017 Energy performance of buildings - Ventilation for buildings - Part 5-2: Calculation methods for energy requirements of ventilation systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 2: Distribution and generation CEN/TC MDRAP 302 EN :2017 Energy performance of buildings - Ventilation for buildings - Part 7: Calculation methods for the determination of air flow rates in buildings including infiltration (Modules M5-5) 122 MDRAP 302 EN :2017 Energy performance of buildings - Ventilation for buildings - Part 9: Calculation methods for energy requirements of cooling systems (Modules M4-1, M4-4, M4-9) - General 123 MDRAP 302 FprEN Energy performance of buildings - Part 1: Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics - Module M MDRAP 302 EN ISO 16891:2016 Test methods for evaluating degradation of characteristics of cleanable filter media (ISO 16891:2016) 125 MDRAP 302 EN ISO :2016 Solar energy - Collector components and materials - Part 1: Evacuated tubes - Durability and performance (ISO :2016) 126 MDRAP 302 EN ISO :2016 Solar energy - Collector components and materials - Part 2: Heat-pipes for solar thermal application - Durability and performance (ISO :2016) CEN/TC 156 CEN/TC 156 CEN/TC 156 CEN/TC 195 CEN/TC 312 CEN/TC 312

10 127 MDRAP 321 EN 206:2013+A1:2016 Concrete - Specification, performance, production and conformity CEN/TC MDRAP 321 EN 451-2:2017 Method of testing fly ash - Part 2: Determination of fineness by wet sieving 129 MDRAP 321 EN :2015 Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures 130 UE 326 EN :2012+A1:2017 Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control CEN/TC 104 CEN/TC 104 CEN/TC MDRAP 343 EN :2003/A1:2015 Eurocode 1 - Actions on structures - Part 1-3: General CEN/TC 250 actions - Snow loads 132 MDRAP 343 EN :2006/A1:2015 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels CEN/TC MDRAP 343 EN :2006/A1:2017 Eurocode 3 - Design of steel structures - Part 1-5: CEN/TC 250 Plated structural elements 134 MDRAP 343 EN :2007/A1:2017 Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures CEN/TC MDRAP 343 EN :2007/A1:2017 Eurocode 3 - Design of steel structures - Part 4-1: Silos CEN/TC MDRAP 343 EN :2007/A1:2017 Eurocode 3 - Design of steel structures - Part 4-2: Tanks 137 MDRAP 346 EN :2017 Lightning Protection System Components (LPSC) - Part 1: Requirements for connection components 138 MDRAP 346 EN :2017 Lightning Protection System Components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG) CEN/TC 250 CLC/TC 81X CLC/TC 81X 139 MDRAP 346 EN :2017 Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners 140 MDRAP 346 EN :2017 Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals 141 UE 347 EN 772-5:2016 Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units CLC/TC 81X CLC/TC 81X CEN/TC UE 347 EN 772-5:2016/AC:2017 Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units 143 MDRAP 361 EN ISO :2012 Geotechnical investigation and testing - Field testing - Part 4: Ménard pressuremeter test (ISO :2012) CEN/TC 125 CEN/TC UE 1 EN :2017 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors 145 ME 15 EN 62772:2016 Composite Hollow Core Station Post Insulators for substations with a.c. voltage greater than V and d.c. voltage greater than V - Definitions, test methods and acceptance criteria CLC/TC 2 CLC/SR 36

11 146 ME 19 EN :2014 Environmental testing - Part 1: General and guidance CLC/SR ME 19 EN :2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature CLC/SR ME 19 EN :2008 Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens 149 ME 19 EN :2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) 150 ME 23 EN :2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels CLC/SR 104 CLC/SR 104 CLC/TC 65X 151 ME 26 EN :2010 Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts CLC/SR ME 26 EN :2013 Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests CLC/SR ME 27 EN :2015 Alarm and electronic security systems - Part 11-2: Electronic access control systems - Application guidelines 154 UE 30 EN :2000 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests 155 UE 30 EN :2012 Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test 156 UE 36 EN :2014/A1:2016 Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 2: Energy efficiency indicators for power drive systems and motor starters 157 UE 39 EN ISO 544:2017 Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings (ISO 544:2017) CLC/TC 79 CLC/TC 210 CLC/TC 210 CLC/TC 22X CEN/TC ME 39 EN ISO 3677:2016 Filler metal for soldering and brazing - Designation (ISO 3677:2016) 159 ME 39 EN ISO 9017:2018 Destructive tests on welds in metallic materials - Fracture test (ISO 9017:2017) CEN/TC 121 CEN/TC ME 39 EN ISO :2017 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO :2017) CEN/TC 121

12 161 ME 39 EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018) CEN/TC ME 39 EN ISO 12670:2015 Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011) 163 ME 39 EN ISO 13916:2017 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017) CEN/TC 240 CEN/TC ME 39 EN ISO 14271:2017 Resistance welding - Vickers hardness testing (lowforce CEN/TC 121 and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017) 165 ME 39 EN ISO 14923:2003 Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003) 166 ME 39 EN ISO :2018 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets (ISO :2017) CEN/TC 240 CEN/TC ME 39 EN ISO 15296:2018 Gas welding equipment - Vocabulary (ISO 15296:2017) CEN/TC ME 39 EN 15340:2007 Thermal spraying - Determination of shear load resistance of thermally sprayed coatings 169 ME 39 EN 15648:2009 Thermal spraying - Component related procedure qualification 170 ME 39 EN ISO 17640:2017 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2017) CEN/TC 240 CEN/TC 240 CEN/TC ME 39 EN ISO 17836:2017 Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017) 172 ME 39 EN ISO 19285:2017 Non-destructive testing of welds - Phased array ultrasonic testing (PAUT) - Acceptance levels (ISO 19285:2017) 173 ME 39 EN ISO 23279:2017 Non-destructive testing of welds - Ultrasonic testing - Characterization of discontinuities in welds (ISO 23279:2017) 174 ME 40 EN :2016 Non-destructive testing - Thermographic testing - Part 3: Terms and definitions 175 ME 58 EN ISO :2013 Quantities and units - Part 1: General (ISO : Cor 1:2011) CEN/TC 240 CEN/TC 121 CEN/TC 121 CEN/TC 138 CEN/SS F ME 59 EN ISO 888:2018 Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012) 177 ME 59 EN ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) CEN/TC 185 CEN/TC UE 59 EN ISO 6103:2014 Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing (ISO 6103:2014) CEN/TC 143

13 179 ME 66 EN 926-1:2015 Paragliding equipment - Paragliders - Part 1: Requirements and test methods for structural strength CEN/TC ME 66 EN :2012 Inflation devices and accessories for inflatable consumer products - Part 1: Compatibility of valves and valve adapters 181 UE 78 EN ISO :2016 Road vehicles - Vehicle-to-grid communication Interface - Part 2: Network and application protocol requirements (ISO :2014) 182 UE 78 EN 16882:2016 Road vehicles - Security of the mechanical seals used on tachographs - Requirements and test procedures CEN/TC 136 CEN/TC 301 CEN/TC UE 78 EN ISO 18246:2017 Electrically propelled mopeds and motorcycles - Safety requirements for conductive connection to an external electric power supply (ISO 18246:2015) CEN/TC ME 84 EN ISO 505:2017 Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts (ISO 505:2017) 185 ME 103 EN ISO :2016 Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO :2016) 186 ME 103 EN ISO :2014 Textiles - Seam tensile properties of fabrics and madeup textile articles - Part 1: Determination of maximum force to seam rupture using the strip method (ISO :2014) 187 ME 103 EN ISO :2014 Textiles - Seam tensile properties of fabrics and madeup textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO :2014) 188 ME 103 EN ISO :1999 Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO :1999) CEN/TC 188 CEN/TC 248 CEN/TC 248 CEN/TC 248 CEN/TC UE 108 EN 513:1999 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering CEN/TC UE 108 EN 917:1997 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness 191 UE 108 EN 1120:1996 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition CEN/TC 155 CEN/TC UE 108 EN 1228:1996 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness 193 UE 108 EN 1277:2003 Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints 194 UE 108 EN 1393:1996 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties 195 UE 108 EN 1394:1996 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength CEN/TC 155 CEN/TC 155 CEN/TC 155 CEN/TC 155

14 196 UE 108 EN ISO 9080:2012 Plastics piping and ducting systems - Determination of CEN/TC 155 the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012) 197 UE 108 EN ISO 13968:2008 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008) CEN/TC UE 108 EN 14830:2006 Thermoplastics inspection chamber and manhole bases CEN/TC Test methods for buckling resistance 199 UE 108 CEN/TS 16137:2011 Plastics - Determination of bio-based carbon content CEN/TC UE 108 CEN/TS 16398:2012 Plastics - Template for reporting and communication of bio-based carbon content and recovery options of biopolymers and bioplastics - Data sheet CEN/TC UE 108 EN ISO 16871:2003 Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003) CEN/TC UE 109 EN :2015 Heat meters - Part 2: Constructional requirements CEN/TC ME 109 EN :2015 Gas meters - Conversion devices - Part 3: Flow computer CEN/TC UE 118 EN 14322:2017 Wood-based panels - Melamine faced board for interior CEN/TC 112 uses - Definition, requirements and classification 205 UE 118 EN 14323:2017 Wood-based panels - Melamine faced boards for CEN/TC 112 interior uses - Test methods 206 UE 118 EN 14354:2017 Wood-based panels - Wood veneer floor coverings CEN/TC UE 118 CEN/TS 14966:2005 Wood-based panels - Small scale indicative test methods for certain mechanical properties 208 ME 131 EN 62612:2013/AC: Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements 209 ME 145 EN :2012 Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance 210 UE 159 EN 50200:2015 Method of test for resistance to fire of unprotected small cables for use in emergency circuits CEN/TC 112 CLC/TC 34 CLC/SR 48B CLC/TC UE 159 EN 50577:2015 Electric cables - Fire resistance test for unprotected electric cables (P classification) 212 ME 159 EN :2012/A1:2017 Electric and optical fibre cables - Test methods for nonmetallic materials - Part 201: General tests - Measurement of insulation thickness 213 ME 159 EN :2012/A1:2017 Electric and optical fibre cables - Test methods for nonmetallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath 214 ME 159 EN :2012/A1:2017 Electric and optical fibre cables - Test methods for nonmetallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven CLC/TC 20 CLC/TC 20 CLC/TC 20 CLC/TC ME 159 EN :2012/A1:2017 Electric and optical fibre cables - Test methods for nonmetallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors CLC/TC ME 159 EN :2012/A1:2017 Electric and optical fibre cables - Test methods for nonmetallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths CLC/TC 20

15 217 ME 159 EN :2012/A1:2017 Electric and optical fibre cables - Test methods for nonmetallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test) CLC/TC ME 159 EN :2012/A1:2017 Electric and optical fibre cables - Test methods for nonmetallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds CLC/TC UE 160 EN :2017 Multi-element metallic cables used in analogue and digital communications and control - Part 12-1: Sectional specification for screened cables characterised from 1 MHz up to MHz - Horizontal and building backbone cables CLC/TC 46X 220 UE 162 EN :2017 Insulation coordination for equipment within low-voltage CLC/SR 109 systems - Part 3: Use of coating, potting or moulding for protection against pollution 221 ME 164 EN :2003/A1:2017 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment 222 ME 164 EN :2003/A1:2017 Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2) 223 ME 164 EN :2003/A1:2017 Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2) 224 ME 164 EN :2003/A1:2017 Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) 225 ME 164 EN :2003/A1:2017 Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3) CLC/TC 13 CLC/TC 13 CLC/TC 13 CLC/TC 13 CLC/TC UE 167 EN 50160:2010/A1:2015 Voltage characteristics of electricity supplied by public electricity networks 227 ME 225 EN 15456:2008 Heating boilers - Electrical power consumption for heat generators - System boundaries - Measurements CLC/TC 8X CEN/TC ME 230 EN ISO :2005 Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams (ISO :2005) CEN/TC ME 230 EN ISO :2005 Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams (ISO :2005) 230 ME 230 EN ISO 11670:2003 Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability (ISO 11670:2003) CEN/TC 123 CEN/TC ME 230 EN ISO 13694:2015 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2015) 232 ME 230 EN ISO :2003 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects (ISO :2003) 233 ME 230 EN ISO :2005 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 2: Shack-Hartmann sensors (ISO :2005) CEN/TC 123 CEN/TC 123 CEN/TC 123

16 234 ME 230 EN ISO 17526:2003 Optics and optical instruments - Lasers and laserrelated CEN/TC 123 equipment - Lifetime of lasers (ISO 17526:2003) 235 ME 231 EN 1968:2002 Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders CEN/TC ME 231 EN ISO :2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO :2013) CEN/TC ME 231 EN ISO :2018 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO :2018) CEN/TC ME 231 EN ISO :2001 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO :2001) CEN/TC UE 238 CLC/TS 50594:2015 Tumble dryers for commercial use - Methods for CLC/TC 59X measuring the performance 240 UE 238 EN 50597:2015 Energy Consumption of Vending Machines CLC/TC 59X 241 ME 238 EN 60734:2012 Household electrical appliances - Performance - Water CLC/TC 59X for testing 242 UE 270 EN 14045:2003 Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions CEN/TC UE 270 EN ISO 16106:2006 Packaging - Transport packages for dangerous goods - CEN/TC 261 Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 (ISO 16106:2006) 244 ME 320 EN 228:2012+A1:2017 Automotive fuels - Unleaded petrol - Requirements and test methods CEN/TC ME 320 EN 590:2013+A1:2017 Automotive fuels - Diesel - Requirements and test methods CEN/TC 19

17 246 ME 320 EN ISO 2719:2016 Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) CEN/TC ME 320 EN ISO 5163:2014 Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method (ISO 5163:2014) 248 ME 320 EN ISO 5164:2014 Petroleum products - Determination of knock characteristics of motor fuels - Research method (ISO 5164:2014) 249 ME 320 EN 12916:2016 Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection 250 ME 320 EN ISO 13736:2013 Determination of flash point - Abel closed-cup method (ISO 13736:2013) 251 ME 320 EN 14078:2014 Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method CEN/TC 19 CEN/TC 19 CEN/TC 19 CEN/TC 19 CEN/TC ME 320 EN ISO 22854:2016 Liquid petroleum products - Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel - Multidimensional gas chromatography method (ISO 22854:2016) CEN/TC UE 333 EN :2017 Electric vehicle conductive charging system - Part 21-1: CLC/TC 69X Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply 254 ME 338 EN ISO 787-1:2017 General methods of test for pigments and extenders - Part 1: Comparison of colour of pigments (ISO 787-1:1982) 255 ME 338 EN ISO :2017 General methods of test for pigments and extenders - Part 22: Comparison of resistance to bleeding of pigments (ISO :1980) 256 ME 338 EN ISO 787-4:2017 General methods of test for pigments and extenders - Part 4: Determination of acidity or alkalinity of the aqueous extract (ISO 787-4:1981) 257 ME 338 EN ISO :2013 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/uv light (ISO :2013) 258 ME 357 EN :2016 Gas infrastructure - Underground gas storage - Part 2: Functional recommendations for storage in oil and gas fields 259 ME 357 EN :2016 Gas infrastructure - Underground gas storage - Part 5: Functional recommendations for surface facilities CEN/TC 298 CEN/TC 298 CEN/TC 298 CEN/TC 139 CEN/TC 234 CEN/TC 234

18 260 ME 357 EN ISO :2008 Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality (ISO :2006) CEN/TC ME 357 EN ISO 16664:2017 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO 16664:2017) 262 ME 357 EN :2017 Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network - Part 2: Automotive fuels specification 263 ME 357 CEN/TR 16940:2016 Domestic gas installations - Recommendations for safety 264 ME 357 pren ISO Natural gas - Calculation of thermodynamic properties - Part 2: Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application (ISO :2015) CEN/SS N21 CEN/TC 408 CEN/TC 234 CEN/TC UE 373 EN ISO 2603:2016 Simultaneous interpreting - Permanent booths - CEN/SS A07 Requirements (ISO 2603:2016) 266 UE 373 EN ISO 4043:2016 Simultaneous interpreting - Mobile booths - CEN/SS A07 Requirements (ISO 4043:2016) 267 ME 373 EN ISO 17100:2015/A1:2017 Translation services - Requirements for translation services - Amendment 1 (ISO 17100:2015/Amd 1:2017) CEN/SS A UE 373 EN ISO 20108:2017 Simultaneous interpreting - Quality and transmission of sound and image input - Requirements (ISO 20108:2017) 269 UE 373 EN ISO 20109:2016 Simultaneous interpreting - Equipment - Requirements (ISO 20109:2016) 270 UE 373 CEN/TS 99001:2008 Business support - Support services provided to small enterprises - Terminology, quality and performance CEN/SS A07 CEN/SS A07 CEN/TC UE 388 CEN/TS :2017 Electronic invoicing - Part 2: List of syntaxes that comply with EN UE 388 CEN/TS :2017 Electronic invoicing - Part 3-1: Methodology for syntax bindings of the core elements of an electronic invoice CEN/TC 434 CEN/TC ANRE 392 EN ISO/IEC :2016 Energy efficiency and renewable energy sources - Common international terminology - Part 1: Energy efficiency (ISO/IEC :2015) 274 ANRE 392 EN ISO/IEC :2016 Energy efficiency and renewable energy sources - Common international terminology - Part 2: Renewable energy sources (ISO/IEC :2015) CEN/SS F23 CEN/SS F MM 53 EN ISO 11771:2010 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010) 276 MM 53 EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism 277 MM 53 EN 14790:2017 Stationary source emissions - Determination of the water vapour in ducts - Standard reference method CEN/TC 264 CEN/TC 264 CEN/TC MM 53 EN 14791:2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method 279 MM 53 EN 14792:2017 Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence 280 MM 53 EN 14793:2017 Stationary source emissions - Demonstration of equivalence of an alternative method with a reference method CEN/TC 264 CEN/TC 264 CEN/TC 264