NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE za obdobie od do Documents Title Closing date

Transcription

1 NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE za obdobie od do Documents Title Closing date 18/1490/FDIS IEC/IEEE : Utility connections in port - Part 2: High and low voltage shore connection systems - Data communication for monitoring and control 23J/399/FDIS IEC Ed.1: Switches for appliances - Part 1-1: Requirements for mechanical switches J/400/FDIS IEC Ed.1: Switches for appliances - Part 1-2: Requirements for electronic switches /901/CD IEC 60942: Electroacoustics - Sound calibrators (Revision of IEC 60942:2003) /583/FDIS IEC /A1/Ed1: Grading capacitors for high-voltage alternating current circuit-breakers - Part 1: General /758/DTS IEC/TS Ed 3: "Safety of machinery - Application of protective equipment to detect the presence of persons" /759/CD IEC Ed. 3.0: Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) 51/1128/CDV IEC Ed.1: Ferrite cores - Dimensions - Part 12: Ring cores 51/1129/CDV IEC Ed.4: Calculation of the effective parameters of magnetic piece parts 51/1130/CDV IEC Ed.3: Soft ferrite material classification 56/1674/CD IEC 60812/Ed3: Failure Modes and Effects analysis (FMEA) K/272/CDV IEC Ed.3: Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13: Particular requirements for range hoods and other fume extractors 65B/1039/FDIS IEC Ed 2: Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs - Part 2: Guidance for inspection and routine testing 68/535/DTR IEC/TR Ed.1: Studies and comparisons of magnetic measurements on grain-oriented electrical sheet steel determined by the Single Sheet Test method and Epstein test method 85/535/CDV IEC : Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI) 86A/1706/CDV IEC /Ed1: Optical fibre cables - Part 2-22: Indoor optical fibre cables - Detail specification for multi-simplex breakout optical cables to be terminated with connector 91/1348/DTS IEC/TS Ed.1: Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3-301: Test methods for interconnection structures (printed boards) - Appearance inspection method for plated surfaces on PWB 103/147/FDIS IEC Ed.1.0: TRANSMITTING EQUIPMENT FOR RADIOCOMMUNICATION - FREQUENCY RESPONSE OF OPTICAL-TO-ELECTRIC CONVERSION DEVICE IN HIGH-FREQUENCY RADIO OVER FIBRE SYSTEMS - MEASUREMENT METHOD 104/676/CD IEC Ed.2: Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers 111/408/CDV IEC Ed.1.: Determination of certain substances in electrotechnical products - Part 7-2: Hexavalent chromium (Cr(VI)) in polymers and electronics by the colorimetric method Page 1 of 6

2 10/997/CD IEC Ed.2: Insulating liquids - Test methods for oxidation stability - Test method for evaluating of oxidation stability of uninhibited and inhibited insulating liquids (former IEC Part C) 23B/1208/FDIS Amendment 1 to IEC Ed.1: Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements 35/1359/FDIS IEC /Ed4: Primary batteries - Part 3: Watch batteries 35/1360/FDIS IEC /Ed4: Primary batteries - Part 5: Safety of batteries with aqueous electrolyte 47A/988/FDIS IEC Ed.1: EMC IC modelling - Part 4: Models of integrated circuits for RF immunity behavioural simulation - Conducted immunity modelling (ICIM-CI) 49/1185/FDIS IEC Ed.5: Synthetic quartz crystal - Specifications and guidelines for use 56/1674A/CD IEC 60812/Ed3: Failure Modes and Effects analysis (FMEA) 62D/1338/FDIS ISO : Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications 65A/788/FDIS IEC Ed. 2.0: INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - Part 1: Terminology and basic concepts 65B/1040/FDIS IEC Ed 2 INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO- OR MULTI-POSITION OUTPUTS - Part 1: Methods for evaluating performance 77/517/CD IEC TR : Electromagnetic Compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments 91/1349/DTR IEC/TR Ed.1: Documentation on design automation subjects - Mathematical algorithm hardware description languages for system level modeling and verification (HDLMath) 91/1350/FDIS IEC Ed.1: Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly 91/1351/FDIS IEC Ed.1: Materials for printed boards and other interconnecting structures - Part 2-44: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly 95/343/CD IEC/IEEE Ed.1: Measuring relays and protection equipment - Part 118-1: Synchrophasor for power systems - Measurements 101/505/FDIS IEC Ed.2: Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements 120/68/CD IEC Ed.1: Electric Energy Storage System - Terminology 121A/81/CD IEC Ed.4: Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters Electromechanical contactors and motor-starters 121B/40/CDV IEC Ed.3: Low-voltage switchgear and controlgear assemblies - Part 1: General rules B/41/CDV IEC Ed.3: Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies CABPUB/123/CD ISO/IEC CD : Conformity assessment - General requirements for the competence of testing and calibration laboratories 22F/412/CDV IEC Ed.1: Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical Testing Page 2 of 6

3 23H/352/CDV IEC Ed.2: Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) - Part 2: Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships 23H/356/CD IEC Ed.1: Plugs, socket-outlets and couplers with arcuate contacts J/401/FDIS IEC Ed.4: Switches for appliances - Part 1: General requirements 26/588/CDV IEC Ed.1: Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 Hz) - Part 3: Resistance welding equipment 27/967/CDV IEC Ed.2: Safety in installations for electroheating and electromagnetic processing - Part 12: Particular requirements for infrared electroheating 34A/1888/CDV Amendment 1 to IEC Ed.4: Lamps for road vehicles - Performance requirements 34B/1836/CDV IEC Ed.4: Bayonet lampholders 34B/1842/CDV IEC Ed.8: Lampholders for tubular fluorescent lamps and starterholders 34B/1852/FDIS IEC Ed.8: Edison screw lampholders 34B/1853/FDIS Amendment 54 to IEC Ed.3: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps 34B/1854/FDIS Amendment 51 to IEC Ed.3: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders 34B/1855/FDIS Amendment 52 to IEC Ed.3: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges 34C/1199/FDIS Amendment 1 to IEC Ed.2: Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules 40/2460/FDIS IEC Ed.3: Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte 47F/243/CD IEC Ed.1: Semiconductor devices - Micro-electromechanical devices - Part 29: Electromechanical relaxation test method for freestanding conductive thin-films under room temperature 57/1662/CDV IEC Ed.1: Power systems management and associated information exchange - Data and communications security - Part 7: Network and system management (NSM) data object models 57/1663/CDV IEC Ed.1: Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals (APLC) 61/5142/FDIS IEC /Ed5: Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers 61J/624/CDV IEC 62784/Ed1: Particular requirements for vacuum cleaners and dust extractors providing equipment protection level Dc for the collection of combustible dusts 61J/635/FDIS IEC /Ed4: Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners 62D/1317/CDV IEC : Medical Electrical Equipment - Part 2-30: Particular requirements for basic safety and essential performance of automated non-invasive sphygmomanometers 65/627/FDIS IEC Ed.1: SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - Part 2-202: Particular requirements for electrically operated valve actuators Page 3 of 6

4 65A/793/FDIS 65A/794/FDIS 65A/795/FDIS IEC Ed. 2.0: INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - Part 5: Assessment of system dependability IEC Ed. 2.0: INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSEOF SYSTEM ASSESSMENT - Part 6: Assessment of system operability IEC Ed. 2.0: INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - Part 7: Assessment of system safety 65A/796/FDIS IEC Ed. 2.0: INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - Part 8: Assessment of other system properties 65C/851/FDIS IEC x Ed 3.0: Industrial communication networks - Profiles - Part 3-x: Functional safety fieldbuses - Additional specifications for CPF x 68/533/CDV IEC Ed 3: Magnetic materials - Part 1: Classification 80/789/CDV IEC A1 Ed.3: Amendment 1 to IEC Ed.3: Global maritime distress and safety system (GMDSS) - Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group call (EGC) equipment - Operational and performance requirements, methods of testing and required test results 82/1070/CDV IEC Ed.1: Photovoltaic system performance - Part 1: Monitoring 86B/3982/CD IEC /Ed1: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-54: Tests - Corrosive atmosphere (mixed gas) 86B/3983/CD IEC /Ed1: Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 6-2: Connection of 50,0?m core diameter multimode physically contacting fibres - Non-angled for reference connector application, at wavelength of 850nm using traditional macrobend attenuation fibre only 100/2640/CDV IEC Ed. 1.0 DIGITAL TELEVISION ACCESSIBILITY - Functional specifications (TA 16) 105/564/CDV IEC Ed.2: Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems 107/281/PAS IEC PAS : Process management for avionics - electronic components for aerospace, defence and high performance (ADHP) applications - Part 2: General requirements for passive components 110/756/CD IEC Ed.1: Laser display devices - Part 5-3: Measuring methods of visual quality for laser projector displays /758/CD IEC Ed.1: Laser display devices - Part 5-1: Measurement of optical performance for laser front projection /1422/CD IEC/TS Ed.1: Guidelines for general planning and design of microgrids 8/1424/CD IEC/TS Ed.1: Technical requirements for operation and control of microgrids 9/2127/CDV IEC Ed.2: Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules 9/2128/CDV IEC Ed.2: Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules 14/852/DTS IEC TS Ed.1: Power transformers - Part 20: Energy efficiency 23/742/DTR IEC/TR Ed.4: Electrical accessories - Harmonization of general rules 34A/1895/CD IEC Ed.2: LED modules for general lighting - Safety specifications Page 4 of 6

5 36/378/FDIS 46/599/FDIS 48B/2486/CD 48B/2488/CD 57/1688/DTR 57/1689/FDIS 59A/204/CDV 61/5135/FDIS 61/5136/FDIS 61H/321/FDIS 65A/790/FDIS 65A/791/FDIS 65A/792/FDIS 77B/757/CD 78/1152/CD 81/515/CD 86B/3972/CDV 90/364/CD 91/1336/CDV IEC Ed2: COMPOSITE STRING INSULATOR UNITS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE GREATER THAN V - Part 1: Standard strength classes and end fittings IEC Ed4.0: RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to MHz, IEC connectors IEC /Ed1: Connectors for electronic equipment - Product requirements -Part 3-119: Rectangular connectors - Detail specification for unshielded, free and fixed 10 way connectors with push-pull coupling for industrial environments with frequencies up to 100 MHz IEC /Ed2: Connectors for electronic equipment-tests and measurements-part 8-3: Static load tests (fixed connectors) test 8c: Robustness of actuating lever IEC TR Ed.2: Power systems management and associated information exchange - Part 1: Reference architecture IEC Ed.1: Framework for energy market communications - Part 451-6: Publication of information on market, contextual and assembly models for European style market IEC Ed.3: Household and similar electrical appliances - Test code for the determination of airborne acoustical noise -Part 2-3: Particular requirements for dishwashers IEC /Ed6: Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care IEC /Ed6: Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines IEC /Ed3: Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal stunning equipment IEC Ed. 2.0: Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology IEC Ed. 2.0: Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality IEC Ed. 2.0: Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 4: Assessment of system performance IEC : Electromagnetic Compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test IEC : Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-1: Test methods - Method 1: Determination of the arc rating (ELIM, ATPV and/or EBT) of clothing materials and of protective clothing using an open arc IEC/TS Ed.1: Lightning Protection System Components (LPSC) - Part 8: Requirements for components for isolated LPS IEC /Ed2: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-52: Tests - Bending test for cords IEC : Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of Nb superconductors IEC Ed.1: Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-503: General test methods for materials and assemblies - Conductive Anodic Filaments (CAF) testing of circuit boards Page 5 of 6

6 101/506/CD IEC/TR Ed.2: Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide 110/730/CDV IEC Ed.1: Electronic paper displays - Part 4-2: Environmental test methods 110/753/FDIS IEC Ed.1: Liquid crystal display devices - Part 30-4: Measuring methods for liquid crystal display modules Dynamic backlight units 110/755/CD IEC Ed.1 - Touch and interactive displays - Part 12-10: Measurement methods of touch displays - Touch and electrical performance 111/418/CD IEC Ed. 2.0: Determination of certain substances in electrotechnical products - Part 3-2: Screening of the halogens (fluorine, bromine and chlorine) in polymer and electronics by Combustion - Ion Chromatography (C-IC) 112/357/CD IEC/TR Ed.1: Guide for the statistical analysis of aging test data - Part 3: Minimum specimen numbers at different test conditions with given experimental data 18/1483/CDV IEC/IEEE : Utility connections in port - Part 1: High Voltage Shore Connection (HVSC) Systems - General requirements 23J/402/FDIS IEC Ed.1: Switches for appliances - Part 2-6: Particular requirements for switches used in electric motoroperated hand-held tools, transportable tools and lawn and garden machinery 37/431/CDV IEC /Ed3: Surge arresters - Part 5: Selection and application recommendations 40/2461/CD IEC Ed.1: Methods of measurement of low resistance 47/2281/CDV IEC Ed.1: Semiconductor devices - Mechanical and climatic test methods - Part 28: Electrostatic discharge (ESD) sensitivity testing - Charged device model (CDM) - device level 48B/2475/CDV IEC /Ed3: Connectors for electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2000 MHz 59F/295A/DTS IEC TS Ed.1: Surface cleaning appliances - Part 1: General requirements 61J/637/FDIS IEC /Ed5: Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use 79/549/CD IEC Ed.1: Video surveillance systems for use in security applications - Part 5: Data specifications and image quality performance for camera devices 81/516/CD IEC Ed.3: Protection against lightning - Part 1: General principles 81/517/CD IEC Ed.3: Protection against lightning - Part 2: Risk management 81/518/CD IEC Ed.3: Protection against lightning - Part 3: Physical damage to structures and life hazard 85/542/CD IEC : Electrical safety in low voltage distribution systems up to V a.c. and V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Power metering and monitoring devices (PMD) A/1712/CDV IEC /Ed4: Optical fibre cables - Part 1-2: Basic optical cable test procedures - General and definitions 88/580/CDV IEC Ed.2: Wind turbines - Part 25-6: Communications for monitoring and control of wind power plants - Logical node classes and data classes for condition monitoring 110/760/FDIS IEC Ed.1: Laser display devices - Part 5-2: Optical measuring methods of speckle contrast 121A/85/CD IEC/TR Ed.1: Low-voltage switchgear and controlgear - Fire risk analysis and risk reduction measures CIS/A/1157/CD Amendment 2 to CISPR : Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring appratus - EMC antenna calibration Page 6 of 6