Δ.Δ. Παπ. ΙΙΙ(Ι) Κ.Γ.Π. 418/2017 Απ. 5053, Απιθμόρ 418. ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 έσο 2012

Transcription

1 3244 Δ.Δ. Παπ. ΙΙΙ(Ι) Κ.Γ.Π. 418/2017 Απ. 5053, Απιθμόρ 418 ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 έσο 2012 Γλσζηνπνίεζε βάζεη ηνπ Άξζξνπ 5 ηνπ Βαζηθνχ Νφκνπ 156(Η)/2002 θαη ηνπ Άξζξνπ 6 ηνπ Σξνπνπνηεηηθνχ Νφκνπ 57(Η)/2011 Με ην παξφλ γλσζηνπνηείηαη φηη βάζεη ησλ Άξζξσλ 5 ηνπ βαζηθνχ Νφκνπ 156(Η) ηνπ 2002 θαη 6 ηνπ ηξνπνπνηεηηθνχ Νφκνπ 57(Η)/2011 πνπ ξπζκίδνπλ ηηο δξαζηεξηφηεηεο ηεο Σππνπνίεζεο, Γηαπίζηεπζεο θαη Σερληθήο Πιεξνθφξεζεο, ν Κππξηαθφο Οξγαληζκφο Σππνπνίεζεο (CYS) δεκνζηεχεη σο Κππξηαθά πξφηππα ηα πην θάησ Δπξσπατθά πξφηππα: STANDARDS FROM EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) 01 Generalities. Terminology. Standardization. Documentation 60445:2017 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors S/S 60445: Health care technology 50637:2017 Medical electrical equipment - Particular requirements for the basic safety and essential performance of medical beds for children Environment. Health protection. Safety : : : : :2014 CYS CLC/TS :2017 Collection, logistics & treatment requirements for WEEE - Part 2-4: Treatment requirements for photovoltaic panels Alarm systems - Social alarm systems - Part 2: Trigger devices Alarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors - Passive infrared detectors Generic standard for assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz GHz) Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS Collection, logistics & Treatment requirements for WEEE - Part 3-5: Technical specification for de-pollution - Photovoltaic panels S/S :2000 S/S :2008 (+IS1:2014)

2 : :2017 Functional safety - Safety instrumented systems for the process industry sector - Normative (uon) - Part 1: Framework, definitions, system, hardware and software requirements Generic standard to demonstrate the compliance of equipment used by workers with limits on exposure to electromagnetic fields (0 Hz GHz), when put into service or in situ Metrology and measurement. Physical phenomena : : : :2017 Electricity metering data exchange - The DLMS/COSEM suite - Part 5-3: DLMS/COSEM application layer Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI) Superconductivity - Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors Electricity metering data exchange - The DLMS/COSEM suite - Part 8-5: Narrow-band OFDM G3-PLC communication profile for neighbourhood networks.20 S/S :2016 S/S :2014 S/S CYS CLC/TS : Manufacturing engineering 2: :2010 /A2: : :2017 3: : :2009 Industrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2 Industrial communication networks - High availability automation networks - Part 1: General concepts and calculation methods Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions Industrial communication networks - High availability automation networks - Part 2: Media Redundancy Protocol (MRP) Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3 Field device tool (FDT) interface specification - Part 303-2: Communication profile integration - IEC CP 3/4, CP 3/5 and CP3/6 Field device tool (FDT) interface specification - Part 315: Communication profile integration - IEC CPF S/S 2:2010 S/S :2010 S/S 3: Energy and heat transfer engineering 62817:2015 Photovoltaic systems - Design qualification of solar trackers

3 : :2017 Method for measuring photovoltaic (PV) glass - Part 1: Measurement of total haze and spectral distribution of haze Method for measuring photovoltaic (PV) glass - Part 2: Measurement of transmittance and reflectance Electrical engineering : : : :1998 /A6: : : : : : : : : : :2017 Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds Electric cables - Accessories - Material characterization - Part 2: Fingerprinting for heat shrinkable components for low and medium voltage applications up to 20,8/36 (42) kv Electric cables - Accessories - Material characterization - Part 3: Fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kv Double-capped fluorescent lamps - Performance specifications Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire materials - Part 201: General tests - Measurement of insulation thickness materials - Part 202: General tests - Measurement of thickness of non-metallic sheath materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene compounds materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven materials - Part 410: Miscellaneous tests - Test method for coppercatalyzed oxidative degradation of polyolefin insulated conductors materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test) materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths Insulated bushings for alternating voltages above V Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories S2: S1:2007 CYS HD S1: S1:2008 S/S :2012 S/S 60137:2008 SS/ 60715:2001

4 Electronics : :2004 /A2: :2017 Piezoelectric, dielectric and electrostatic oscillators of assessed quality - Part 1: Generic specification Semiconductor devices - Part 16-4: Microwave integrated circuits - Switches Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes S/S :2007 S/S : Telecommunications. Audio and video engineering : : : : : :2017 Energy management system application program interface (EMS- API) - Part 452: CIM static transmission network model profiles Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test Event video data recorder for road vehicle accidents - Part 1: Basic requirements S/S :2015 S/S :2012 (+AC:2013 ) S/S :2002 S/S : Information technology 50672:2017 Ecodesign requirements for computers and computer servers

5 Railway engineering 50343: : :2017 Railway applications - Rolling stock - Rules for installation of cabling Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules S/S :2002 S/S : Domestic and commercial equipment. Entertainment. Sports 62863:2017 Methods of measuring performances of electric hair clippers or trimmers for household use ΣΡΟΠΟΠΟΗΖΔΗ / CORRIGENDA :2016/AC: CYS HD :2016/AC: :2017/AC: :2013 /A11:2017/AC: :2016/AC: :1993/A56:2017 /AC: :2017/AC: Measurement procedures for materials used in photovoltaic modules - Part 1-5: Encapsulants - Measurement of change in linear dimensions of sheet encapsulation material resulting from applied thermal conditions Low-voltage electrical installations - Part 6: Verification Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specifications Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps Electric vehicle conductive charging system - Part 21-1: Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply