TEST REPORT IEC Safety of laser products - Part 1: Equipment classification and requirements

Size: px
Start display at page:

Download "TEST REPORT IEC Safety of laser products - Part 1: Equipment classification and requirements"

Transcription

1 SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS S TEST REORT Safety of laser products - art 1: Equipment classification and requirements Report Number.... : LCS S Date of issue... : Total number of pages Name of Testing Laboratory preparing the Report : Applicant s name... : Address... : FSTAR TECHNOLOGY LTD Rm2302, shenhua commerce Building, Jiabing Rd. Luohu District, Shenzhen, China Test specification: Standard... : Test procedure... : Non-standard test method... : Test Report Form No.... : Test Report Form(s) Originator... : :2014 (Third Edition) CB Scheme IEC60825_1E ÖVE Master TRF... : Dated Copyright 2014 IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System). All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. If this Test Report Form is used by non-iecee members, the IECEE/IEC logo and the reference to the CB Scheme procedure shall be removed. This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02. General disclaimer: The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Issuing CB Testing Laboratory. The authenticity of this Test Report and its contents can be verified by contacting the NCB, responsible for this Test Report. Test item description... : Trade Mark... : Manufacturer... : Model/Type reference... : Gaming Mouse MAXTEK Same as applicant G1M,G2M, G3M,G4M,G5M,G6M,G7M,G8M,G9M Ratings... : 5V, 16.5mA age 1 of 16

2 SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS S Responsible Testing Laboratory (as applicable), testing procedure and testing location(s): CB Testing Laboratory: Testing location/ address... : Associated CB Testing Laboratory: Testing location/ address... : Tested by (name, function, signature)... : Mr. Jowie Jiao Approved by (name, function, signature)... : Mr. eter Chen Testing procedure: TM/CTF Stage 1: Testing location/ address... : Tested by (name, function, signature)...: Approved by (name, function, signature)...: Testing procedure: WMT/CTF Stage 2: Testing location/ address...: Tested by (name, function, signature)... : Witnessed by (name, function, signature). : Approved by (name, function, signature)... : Testing procedure: SMT/CTF Stage 3 or 4: Testing location/ address... : Tested by (name, function, signature)...: Witnessed by (name, function, signature).: Approved by (name, function, signature)...: Supervised by (name, function, signature) : age 2 of 16

3 SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS S List of Attachments (including a total number of pages in each attachment): Summary of testing: Tests performed (name of test and test clause): The submitted samples were found to comply with the requirements of: IEC 60825:2014 Testing location: Shenzhen LCS Compliance Testing Laboratory Ltd. 1/F., Xingyuan Industrial ark, Tongda Road, Bao'an Avenue, Bao'an District, Shenzhen, Guangdong, China Summary of compliance with National Differences: List of countries addressed The product fulfils the requirements of EN60825:2014 age 3 of 16

4 SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS S Copy of marking plate: The artwork below may be only a draft. age 4 of 16

5 SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS S Test item particulars...: Classification of installation and use...: Transportable Supply Connection...: Class III...: ossible test case verdicts: - test case does not apply to the test object...: - test object does meet the requirement...: (ass) - test object does not meet the requirement...: F (Fail) Testing...: Date of receipt of test item...: Date (s) of performance of tests...: From to General remarks: "(See Enclosure #)" refers to additional information appended to the report. "(See appended table)" refers to a table appended to the report. Throughout this report a comma / point is used as the decimal separator. Manufacturer s Declaration per sub-clause of IECEE 02: The application for obtaining a CB Test Certificate includes more than one factory location and a declaration from the Manufacturer stating that the sample(s) submitted for evaluation is (are) representative of the products from each factory has been provided... : Yes Not applicable When differences exist; they shall be identified in the General product information section. Name and address of factory (ies)... : Same as manufacturer General product information: age 5 of 16

6 SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS S Clause Requirement + Test Result - Remark Verdict 4 CLASSIFICATION RINCILES 4.3 Classification rules a Radiation of a single wavelength 4.3 b Radiation of multiple wavelengths 1) Laser product emits at two or more wavelengths shown as additive in Table 1 2) Laser product emits at two or more wavelengths not shown as additive in Table c Radiation from extended sources (see 5.4.3) 4.3 d Non-uniform, non-circular or multiple apparent source 4.3 e Time bases --- 1) 0,25 s 2) 100 s 3) s 4.3 f Repetitively pulsed or modulated lasers 1) Any single pulse 2) Average power for pulse trains 3) ulse duration t T i... : Number of pulses N and C 5... : 3) ulse duration t > T i... : Number of pulses N and C 5... : 4.4 Laser products designed to function as conventional lamps. measured at 200 mm distance from closest point of human access ( > 5 mrad). Un-weighted radiance L measured at 200 mm distance (comparison with L T = 1 MWm -2 sr -1 / ) under reasonably foreseeable single fault conditions. Evaluation of emission according to IEC series (optional): Standard applied (IEC series),..... : Risk Group : Labelling... : Classification of product based on accessible laser radiation (if no laser radiation accessible: Class 1). age 6 of 16

7 SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS S Clause Requirement + Test Result - Remark Verdict 5 DETERMINATION OF THE ACCESSIBLE EMISSION LEVEL and RODUCT CLASSIFICATION 5.1 Tests --- Compliance under reasonably foreseeable single fault conditions. 5.3 Determination of the class of the laser product... : For Class 1C: vertical safety standard applied with requirements for Class 1C Measurement geometry General Default (simplified) evaluation Conditions applied... : Aperture diameter... : Reference point :... : Measurement distance... : (for each condition) Evaluation condition for extended sources Conditions applied... : Most restrictive position... : (distance from reference point) Angular subtense of the apparent source and C 6 : (for each condition) a Aperture diameters (for each condition).... : b Angle of acceptance (for each condition)...: Measured accessible laser radiation and comparison with AEL: age 7 of 16

8 SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS S Clause Requirement + Test Result - Remark Verdict 6 ENGINEERING SECIFICATIONS 6.2 rotective housing General --- rotective housing prevents access to energy levels in excess of the AEL for Class 1. rotective housing prevents access to energy levels equivalent to Class 4 and withstands exposures under reasonably foreseeable single fault conditions. Maintenance of Class 1, 1C, 1M, 2, 2M, or 3R (access to emissions of Class 3B or 4 is prevented). Maintenance of Class 3B product (access to emission of Class 4 is prevented) Service Removable laser system (laser system complies with requirements of Clauses 6 and 7). 6.3 Access panels and safety interlocks anel is intended to be removed during operation (or maintenance) and would give access to higher energy levels (see Table 13). Accessible emission (after removal of the panel) corresponds to product Class (designated by X in Table 13) Emission through the opening if interlocked panel of Class 1, 1C, 1M, 2, or 2M is removed (Emission < AEL of Class 1M or 2M). Emission through the opening if interlocked panel of Class 3R, 3B, or 4 is removed (Emission < AEL of Class 3R). Requirements regarding reasonably foreseeable single fault condition Override mechanism Behaviour of override in operation when the panel is replaced. Visible or audible warning for override mode. 6.4 Remote interlock connector 6.5 Manual reset 6.6 Key control age 8 of 16

9 SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS S Clause Requirement + Test Result - Remark Verdict 6.7 Laser radiation emission warning Laser product is a 3R (λ<400 nm; λ>700 nm), 1C, 3B or 4 laser systems Audible or visible warning. Warning is failsafe or redundant. Viewing of the visible warning does not require exposure to emissions > AEL for Class 1M and 2M Operational control and laser aperture are provided with a warning device when they are separated more than 2 m from warning device Visible indication of output aperture if laser emission may be distributed through more than one output Switch for handheld Class 3R device must be depressed for emission (in lieu of emission indicator). 6.8 Beam stop or attenuator 6.9 Controls 6.10 Viewing optics a) Human access to laser radiation in excess of Class 1M prevented when the shutter is opened or attenuation varied. b) Opening of the shutter or variation of the attenuation prevented when exposure to laser radiation in excess of Class 1M is possible Scanning safeguard 6.12 Safeguard for Class 1C products a) Human access to laser radiation in excess of AEL for Class 1 measured under Condition 3 is prevented. b) Human access to laser radiation in excess of AEL for Class 3B measured through 3,5 mm aperture at 5 mm distance from applicator is prevented Walk-in access a) Means provided so that any person inside the housing can prevent activation of Class 3B or 4 laser hazards. b) A warning device provides adequate warning of emission to any person within the housing. age 9 of 16

10 SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS S Clause Requirement + Test Result - Remark Verdict c) Where walk-in access during operation is intended or reasonably foreseeable, emission of laser radiation that is equivalent to Class 3B or 4 while someone is present inside the enclosure of Class 1, Class 2 or Class 3R product is prevented by engineering means Environmental conditions climatic conditions - vibration and shock 6.15 rotection against other hazards Non-optical hazards (product safety standard) - electrical hazards; - excessive temperature; - spread of fire from the equipment; - sound and ultrasonics; - harmful substances; - explosion; Collateral radiation 6.16 ower limiting circuit 7 LABELLING 7.1 General --- Labels durable, permanently affixed Labels clearly visible Reading of labels is possible without exposure to laser radiation in excess of AEL for Class 1. Colour combination Labelling impractical due to the size or design of the product. Warning label Hazard symbol (Figure 3) Text on explanatory label or pictogram (laser class, warning text) 7.8 Aperture label 7.9 Radiation output and standards information --- Max output of laser radiation...: age 10 of 16

11 SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS S Clause Requirement + Test Result - Remark Verdict ulse duration... : Emitted wavelength(s)... : Name and publication date of the standard... : SS 7.10 Labels for access panels a) f) Labels for panels - warning wording used... : Labels for safety interlocked panels - Warning wording used... : 7.11 Warning for invisible laser radiation... : 7.12 Warning for visible laser radiation... : 7.13 Warning for potential hazard to the skin or anterior parts of the eye - warning wording used... : 8 OTHER INFORMATIONAL REQUIREMENTS 8.1 Information for the user --- a) adequate instructions for assembly, maintenance and safe use and description of the classification limitations, if appropriate. b) additional warning for Class 1M and 2M c) laser beam parameters for radiation above the AEL of Class Wavelength... : Beam divergence... : ulse pattern... : (pulse duration, repetition rate, ) Maximum power or energy output... : d) safety instruction for embedded laser products and other incorporated laser products. e) ME and NOHD for Class 3B and 4 laser products; For collimated beam Class 1M and 2M lasers the extended NOHD (ENOHD). f) information for the selection of eye protection. g) reproduction of all required labels and warnings. h) location of laser apertures age 11 of 16

12 SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS S Clause Requirement + Test Result - Remark Verdict i) list of controls, adjustments of procedures for operation and maintenance - and warning statement. j) information (compatibility requirements) about laser energy source if not incorporated. k) additional warning for Class 1, 1M, 2, 2M, and 3R regarding skin or corneal burns. l) Information for Class 1C products (e.g. warning that repeated application may pose a risk). 8.2 urchasing and service information a) safety classification of each laser product stated in all descriptive material (e.g. brochures). b) adequate instructions for servicing available: warnings and precautions regarding exposure of laser emission above Class 1 maintenance schedule list of controls and procedures that could increase accessible emissions description of displaceable parts protective procedures for service personnel reproduction of labels and hazard warnings 9 ADDITIONAL REQUIREMENTS FOR SECIFIC LASER RODUCTS 9.1 Applicable other parts of the standard series IEC IEC (Safety of optical communication systems) IEC (Laser guards) 2 (Safety of free space optical communication systems used for transmission of information) 9.2 Medical laser products: Class 3B and Class 4 medical laser products comply with IEC Laser processing machines: Comply with IEC/ISO series. 9.4 Electric toys: Comply with IEC Consumer electronic products: Comply with IEC (IT-equipment) or IEC (AV equipment) age 12 of 16

13 SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS S Clause Requirement + Test Result - Remark Verdict Object / part No. TABLE: Critical components information Manufacturer/ trademark Type / model Technical data Standard Mark(s) of conformity 1) - Description: - Description: - Description: Supplementary information: 1) rovided evidence ensures the agreed level of compliance. See OD-CB2039. age 13 of 16

14 SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS S Clause Requirement + Test Result - Remark Verdict Appendix 1: Test result Condition Note (3) Model Accessible Emission Level Accessible Emission Limit CLASS (a)for retinal Thermal hazard 1 MLS mw@ 650 nm 0.39 mw 1 2 MLS mw@ 650 nm 0.39 mw 1 3 MLS mw@ 650 nm 0.39 mw 1 1 ORION mw@ 649 nm 0.39 mw 1 2 ORION mw@ 649 nm 0.39 mw 1 3 ORION mw@ 649 nm 0.39 mw 1 (b)for retinal Thermal hazard 1 MLS mw@ 650 nm 0.39 mw 1 2 MLS mw@ 650 nm 0.39 mw 1 3 MLS mw@ 650 nm 0.39 mw 1 1 ORION mw@ 649 nm 0.39 mw 1 2 ORION mw@ 649 nm 0.39 mw 1 3 ORION mw@ 649 nm 0.39 mw 1 age 14 of 16

15 SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS S Clause Requirement + Test Result - Remark Verdict Note: (1) All models are tested under normal operation and single fault conditions as below: a. Normal operation: The product is simulated normal using to emit intentional Laser light power and energy. All controls and adjustment are set to the default position by manufacturer and are combined to emit an output of Laser light power and energy. b. Fault condition: The product is simulated a maximum Laser light power and energy, which could cause the increase of Laser output power and energy above normal operation condition. (2) Evaluated for power of retinal thermal hazard only due to the wavelength is not in the range between 400nm and 600nm for energy of retinal photochemical hazard as per Table 5 of standard IEC/EN (3) Calculation of measurement distance (r): Wavelength: 400 nm to 1400 nm Condition 1: the distance is 2000 mm as specified in Table 11 of IEC/EN Condition 2: the distance is 70 mm as specified in Table 11 of IEC/EN Condition 3: the distance is 100 mm as specified in Table 11 of IEC/EN Calculation of the circular aperture stop (d): Wavelength: 400 nm to 1400 nm Condition 1: the aperture stop is 50 mm as specified in Table 11 of IEC/EN Condition 2: the aperture stop is 7 mm as specified in Table 11 of IEC/EN Condition 3: the aperture stop is 7 mm as specified in Table 11 of IEC/EN (4) See below for determination of retinal thermal hazard as specified in Table 4 in IEC/EN : Since t= 100, 1.5 mrad Formula: AEL Class 1 = 3.9 x 10-4 W= 0.39 mw Conclusion: The AEL Class 1 is not exceeding. age 15 of 16

16 SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS S Appended table IEC/EN EQUIMENT MANUFACTURE INFORMATION ( DATA SHEET ) ABOUT THE CONTAINING LASER COMONENT/S Manufacturer... : Opto Focus Co., Ltd. Type designation...: 1. T6505-B TA531N Structure...: - Wavelength...: 1. Typ. 655 nm 2. Typ. 650 nm Output power (min. and max.)...: - Radiation is - Continuous...: - ulsed...: - ulse time...: - ulse repetition frequency...: - Others...: - IC U UNIT Manufacturer... : - Type designation... : - Others... : - TRANSMITTER/TRANSCIEVER UNIT Manufacturer... : - Type designation... : - Others... : - List of test equipment used Type of equipment Model Calibration Date Calibration Due Spectrometer E2000C /09/ /09/19 Laser power & energy meter SOLO E 2016/09/ /09/27 age 16 of 16

17 Attachment No. 1 SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS S Details of: External view-1 Details of: External view-2 age 1 of 5

18 Attachment No. 1 SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS S Details of: External view-3 Details of: External view-4 age 2 of 5

19 Attachment No. 1 SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS S Details of: External view-5 Details of: External view-6 age 3 of 5

20 Attachment No. 1 SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS S Details of: Internal view-1 Details of: CB view-1 age 4 of 5

21 Attachment No. 1 SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS S Details of: CB view-2 age 5 of 5

TEST REPORT IEC Safety of laser products - Part 1: Equipment classification and requirements. TÜV Rheinland Shanghai Co., Ltd.

TEST REPORT IEC Safety of laser products - Part 1: Equipment classification and requirements. TÜV Rheinland Shanghai Co., Ltd. Test Report issued under the responsibility of: TEST REORT IEC 60825-1 Safety of laser products - art 1: Equipment classification and requirements Report Number.... : 50089797 001 Date of issue... : 2017.07.25

More information

TEST REPORT IEC , 2 nd Edition Part 1: Equipment classification and requirements

TEST REPORT IEC , 2 nd Edition Part 1: Equipment classification and requirements Test Report issued under the responsibility of: TEST REORT IEC 60825-1, 2 nd Edition art 1: Equipment classification and requirements Report Reference No....: EFSH15041135-IE-01-L01 Date of issue...: May

More information

Test Report. Report No.: AGC SS01. Attestation of Global Compliance (Shenzhen) Co., Ltd.

Test Report. Report No.: AGC SS01. Attestation of Global Compliance (Shenzhen) Co., Ltd. age 1 of 14 Test Report Report o.: AGC10737170807SS01 RODUCT DESIGATIO : Laser pointer touch pen BRAD AME : /A MODEL AME : MO8097, MO8193 CLIET : Mid Ocean Brands B.V DATE OF ISSUE : Aug.18, 2017 STADARD(S)

More information

TEST REPORT IEC Safety of laser products - Part 1: Equipment classification and requirements

TEST REPORT IEC Safety of laser products - Part 1: Equipment classification and requirements Test Report issued under the responsibility of: TEST REPORT IEC 60825-1 Safety of laser products - Part 1: Equipment classification and requirements Report Number.... : 102254161MPK-001L Date of issue...

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60825-1 1993 AMENDMENT 2 2001-01 PUBLICATION GROUPÉE DE SÉCURITÉ GROUP SAFETY PUBLICATION Amendment 2 Safety of laser products Part 1: Equipment classification, requirements

More information

TEST REPORT IEC Safety of household and similar electrical appliances Part 2: Particular requirements for massage appliance

TEST REPORT IEC Safety of household and similar electrical appliances Part 2: Particular requirements for massage appliance Test Report issued under the responsibility of: SGS- CSTC TEST REORT Safety of household and similar electrical appliances art 2: articular requirements for massage appliance Report Reference No....: GZES100800181503

More information

IEC60601_1J. Medical electrical equipment Part 1: General requirements for basic safety and essential performance

IEC60601_1J. Medical electrical equipment Part 1: General requirements for basic safety and essential performance Page 1 of 157 Report No.: E309264-D1009-1-CB CB - IEC REPORT: Test Report issued under the responsibility of: IEC 60601-1 Medical electrical equipment Part 1: General requirements for basic safety and

More information

TEST REPORT IEC and/or EN Photobiological safety of lamps and lamp systems

TEST REPORT IEC and/or EN Photobiological safety of lamps and lamp systems Test Report issued under the responsibility of: TEST REORT IEC 62471 and/or EN 62471 hotobiological safety of lamps and lamp systems Report Reference No.... : GZES130300236831 Tested by (name + signature)...

More information

AS/NZS IEC :2014

AS/NZS IEC :2014 AS/NZS IEC 60825.1:2014 (IEC 60825-1, Ed. 3.0:2014, IDT) Australian/New Zealand Standard Safety of laser products Part 1: Equipment classification and requirements Superseding AS/NZS IEC 60825.1:2011 AS/NZS

More information

ZHEJIANG MAXGE ELECTRIC TECHNOLOGY CO., LTD. Address...:

ZHEJIANG MAXGE ELECTRIC TECHNOLOGY CO., LTD. Address...: Test Report issued under the responsibility of: TEST REORT IEC 61008-1 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) art 1: General

More information

Photobiological safety of lamps and lamp systems

Photobiological safety of lamps and lamp systems Test Report issued under the responsibility of: Intertek Testing Services, NA Inc. TEST REORT hotobiological safety of lamps and lamp systems Report Reference No.... : 103125175CRT-001 Date of issue...

More information

Test Report issued under the responsibility of:

Test Report issued under the responsibility of: Test Report issued under the responsibility of: NCB TÜ V SÜ D PSB Pte Ltd 1 Science Park Drive, Singapore 118221 TEST REPORT IEC 61347-2-13 Part 2: Particular requirements: Section Thirteen d.c. or a.c.

More information

Amendment to Test Report

Amendment to Test Report - Page 1 of 5 - Test Report issued under the responsibility of: Amendment to Test Report www.nemko.com This Amendment is valid only together with the main Test Report Report o....: 221968 Main Report o...:

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT IEC TR 60825-14 First edition 2004-02 Safety of laser products Part 14: A user's guide Reference number IEC/TR 60825-14:2004(E) Publication numbering As from 1 January 1997 all IEC publications

More information

American National Standard for Safe Use of Lasers

American National Standard for Safe Use of Lasers ANSI Z136.1-2007 Revision of ANSI ZI36.1-2000 American National Standard for Safe Use of Lasers Secretariat Laser Institute of America Approved March 16, 2007 American National Standards Institute, Inc.

More information

Important Safety Notice

Important Safety Notice Date: 27 th April 2015 Page 1 of 12 SPI Lasers UK Limited Safety Information High Power OEM Fibre Lasers Important Safety Notice This notice outlines important safety related information and must be read

More information

Laser Safety Citations

Laser Safety Citations General 1. Lasers are classified appropriately Classify lasers and laser systems according to their relative hazards MSU Laser Safety Manual - Laser Classification, pg 9 2. Beam attenuator present A beam

More information

G4 Pulsed Fiber Laser

G4 Pulsed Fiber Laser G4 Pulsed Fiber Laser OEM Safety and System Integration Manual Module types C1 and C2 Module type C1 - fitted with IBeam1 delivery optic Module type C2 - fitted with IBeam2 delivery optic 1 1 Preface Definition

More information

Laser Radiation and High Voltage/Electrical Shock. Disclaimer and Limitation of Liability. Shipping Damage. Trademarks

Laser Radiation and High Voltage/Electrical Shock. Disclaimer and Limitation of Liability. Shipping Damage. Trademarks DANGER Laser Radiation and High Voltage/Electrical Shock The ILRIS-LR is an inherently dangerous system: Follow safety instructions carefully and consider safety issues at all times. Before operating or

More information

FINAL ATEX REPORT ON EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES FOR GOLDEN PROMISE EQUIPMENT INC. FLOW MONITOR, GPE3000 SERIES,

FINAL ATEX REPORT ON EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES FOR GOLDEN PROMISE EQUIPMENT INC. FLOW MONITOR, GPE3000 SERIES, FINAL ATEX REPORT ON EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES FOR GOLDEN PROMISE EQUIPMENT INC. ON FLOW MONITOR, GPE3000 SERIES, REPORT NO. TRA-015825-33-00A ExTR Reference No. TRA-015825-33-00A

More information

TEST REPORT IEC MEDICAL ELECTRICAL EQUIPMENT

TEST REPORT IEC MEDICAL ELECTRICAL EQUIPMENT Test Report issued under the responsibility of: TEST REORT MEDICAL ELECTRICAL EQUIMENT art 1-11: General requirements for basic safety and essential performance Collateral Standard: Requirements for medical

More information

K-SQ13, KA-SQ13, K-SQ14, KA-SQ14, KO-SQ13, KOA-SQ13, KO-SQ14, KOA-SQ14, K-SQ13C, KA-SQ13C, K-SQ14C, KA- SQ14C, KO-SQ13C, KOA-SQ13C, KO-SQ14C,

K-SQ13, KA-SQ13, K-SQ14, KA-SQ14, KO-SQ13, KOA-SQ13, KO-SQ14, KOA-SQ14, K-SQ13C, KA-SQ13C, K-SQ14C, KA- SQ14C, KO-SQ13C, KOA-SQ13C, KO-SQ14C, age 2 of 14 Model/Type reference...: Ratings...: K-SQ13, KA-SQ13, K-SQ14, KA-SQ14, KO-SQ13, KOA-SQ13, KO-SQ14, KOA-SQ14, K-SQ13C, KA-SQ13C, K-SQ14C, KA- SQ14C, KO-SQ13C, KOA-SQ13C, KO-SQ14C, KOA-SQ14C,

More information

Inspection Detail. General Questions for Laser Labs

Inspection Detail. General Questions for Laser Labs Laser Lab Inspection Checklist Building/Room: Authorized User: Inspection #: Inspection Detail 1 This inspection is General Questions for Laser Labs 2 Laser Users List Verified by Laser Supervisor? 3 Laser

More information

Test Report. Test Requested : Test for compliance with clauses 8 and 9 of IEC : 1993+A1+A2. Page 1 of 6

Test Report. Test Requested : Test for compliance with clauses 8 and 9 of IEC : 1993+A1+A2. Page 1 of 6 Applicant: Y. Lin Electronics Co., Ltd. No. 3 Xinguang Road, Jinhe The third Industrial Zone, Zhangmutou Town, Dongguan,. Guangdong, China. Number: Date: 11 Feb 2015 15020100HKG-001 Sample Description

More information

EN50438 TEST REPORT SUMMARY. Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks

EN50438 TEST REPORT SUMMARY. Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks TEST REORT SUMMARY EN 50438 Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks Report reference number... : 12TH0525-EN50438_SUM_0 Date of issue......:

More information

GUANGDONG XINYU TECHNOLOGY INDUSTRIAL CO., LTD

GUANGDONG XINYU TECHNOLOGY INDUSTRIAL CO., LTD CONSUMER PRODUCTS SERVICES DIVISION Date Received: May 25, 2016 Page 1 of 7 GUANGDONG XINYU TECHNOLOGY INDUSTRIAL CO., LTD LAIMEI INDUSTRIAL ZONE,CHENGHAI DISTRICT, SHANTOU, GUANGDONG Sample Description:

More information

IECEx TEST REPORT IEC Explosive atmospheres Part 0: Equipment General requirements

IECEx TEST REPORT IEC Explosive atmospheres Part 0: Equipment General requirements ExTR Reference Number...: ExTR Free Reference Number...: 223531 Compiled by + signature (ExTL)...: Reviewed by + signature (ExTL)...: NO/NEM/ExTR12.0018/00 Stig André Norheim Arne Hortman Date of issue...:

More information

Contains Nonbinding Recommendations. Draft Not for Implementation

Contains Nonbinding Recommendations. Draft Not for Implementation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 Classification and Requirements for Laser Illuminated Projectors (LIPs) (Laser Notice No. 57) Draft Guidance

More information

G4 Pulsed Fiber Laser

G4 Pulsed Fiber Laser G4 Pulsed Fiber Laser OEM Safety and System Integration Manual Module types B1 and B4 Module type B1 - fitted with ILLK beam delivery optic Module type B4 - fitted with ILOC beam delivery optic 1 1 Preface

More information

9 W, 15 W and 25 W Industrial Fiber Laser Systems IFL Series

9 W, 15 W and 25 W Industrial Fiber Laser Systems IFL Series COMMERCIAL LASERS 9 W, 15 W and 25 W Industrial Fiber Laser Systems IFL Series Key Features Diffraction-limited light delivered through fiber termination module Single transverse mode, collimated beam

More information

IEC60601_1J. Medical electrical equipment Part 1: General requirements for basic safety and essential performance

IEC60601_1J. Medical electrical equipment Part 1: General requirements for basic safety and essential performance Page 1 of 170 Report No.: E309264-D1021-1/A1/C0-UL IEC REPORT: Test Report issued under the responsibility of: IEC 60601-1 Medical electrical equipment Part 1: General requirements for basic safety and

More information

Hazard Analysis, Mitigation, and Operating Procedures for (Laser name) Laser

Hazard Analysis, Mitigation, and Operating Procedures for (Laser name) Laser Hazard Analysis, Mitigation, and Operating Procedures for (Laser name) Laser Prepared by: Date: Rev. 6/24/2016 Page 1 of 6 Table of contents Summary of identified hazards and hazards mitigation: 1. General

More information

Laser Safety Program

Laser Safety Program Laser Safety Program Revised December 14, 2017 Prepared by: Brandon S. Chance, MS, CCHO Associate Director of Environmental Health and Safety Office of Risk Management Table of Contents Introduction...

More information

IEC60601_1K. Medical electrical equipment Part 1: General requirements for basic safety and essential performance

IEC60601_1K. Medical electrical equipment Part 1: General requirements for basic safety and essential performance Page 1 of 165 Report No.: E309264-D1028-1/A0/C0-UL Test Report issued under the responsibility of: IEC 60601-1 Medical electrical equipment Part 1: General requirements for basic safety and essential performance

More information

Provläsningsexemplar / Preview TECHNICAL REPORT. Part 3-1: Conformity verification report for IEC :2001 General requirements

Provläsningsexemplar / Preview TECHNICAL REPORT. Part 3-1: Conformity verification report for IEC :2001 General requirements TECHNICAL REPORT IEC TR 61010-3-1 Second edition 2003-04 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 3-1: Conformity verification report for IEC 61010-1:2001

More information

Title: Laser Safety Effective Date: 9/91 Revision: 2/97 Number of Pages: 7

Title: Laser Safety Effective Date: 9/91 Revision: 2/97 Number of Pages: 7 Environmental Health and Safety Manual Policy Number: EH&S 6-8 Title: Laser Safety Effective Date: 9/91 Revision: 2/97 Number of Pages: 7 PURPOSE: SCOPE: To protect University employees against health

More information

A. Administrative. B. Labeling and Posting. C. Control Measures. Laser Safety Self-Audit Checklist. Building Room Principal Investigator Date

A. Administrative. B. Labeling and Posting. C. Control Measures. Laser Safety Self-Audit Checklist. Building Room Principal Investigator Date Laser Safety Self-Audit Checklist Building Room Principal Investigator Date Audit Performed by A. Administrative 1. Lasers are classified appropriately (2, 3a, 3b, 4a, 4b) 2. Standard operating procedures

More information

Test Report Iec En Household And Similar

Test Report Iec En Household And Similar We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with test report iec en 60335

More information

Laser Use at Subaru Telescope (NAOJ) Laser Safety Policy

Laser Use at Subaru Telescope (NAOJ) Laser Safety Policy Laser Use at Subaru Telescope (NAOJ) Laser Safety Policy 1. Introduction This program applies to all lasers and laser systems operated by Subaru Telescope. This program maintains compliance with ANSI Z136.1-2007

More information

Annex A to joint CELMA / ELC Guide on LED related standards: Photobiological safety of LED lamps and lamp systems

Annex A to joint CELMA / ELC Guide on LED related standards: Photobiological safety of LED lamps and lamp systems Annex A to joint CELMA / ELC Guide on LED related standards: Photobiological safety of LED lamps and lamp systems 1 st Edition, November 2009 www.celma.org www.elcfed.org Document CELMA LED(FR)003A TABLE

More information

NEED FOR LASER SAFETY

NEED FOR LASER SAFETY NEED As our use of lasers increases, we have a tendency to think of them as commonplace, and we begin to forget that these small, often invisible light sources are able to cause permanent damage to our

More information

ISO Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Laser assembly

ISO Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Laser assembly INTERNATIONAL STANDARD ISO 22827-1 First edition 2005-10-15 Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 1: Laser assembly Essais de réception pour

More information

Laser Safety. This Laser Safety Program applies to the acquisition, use, transfer, and disposal of all Class 3B and 4 lasers at UNC Asheville.

Laser Safety. This Laser Safety Program applies to the acquisition, use, transfer, and disposal of all Class 3B and 4 lasers at UNC Asheville. Laser Safety The UNC Asheville laser safety program requires that all lasers and laser systems be operated in accordance with the American National Standards Institute (ANSI) Z136.1 2007, American National

More information

ANSI Z136.1-CDV Status on Updates for Next Revision & Work by TSC-4 Committee on Control Measures and Training

ANSI Z136.1-CDV Status on Updates for Next Revision & Work by TSC-4 Committee on Control Measures and Training ANSI Z136.1-CDV Status on Updates for Next Revision & Work by TSC-4 Committee on Control Measures and Training American National Standard Z136 Series Z136.1 for Safe Use of Lasers Z136.3 Z136.4 Z136.5

More information

Consumer Products Services Germany GmbH Türkheim Germany

Consumer Products Services Germany GmbH Türkheim Germany TEST REORT SUMMARY EN 50438 Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks Report reference number... : 11TH0290-EN50438_SUM_2 Date of issue......:

More information

Stony Brook University Hospital Environmental Health & Safety Policy & Procedure Manual. EH&S 6-8 Original : 1/00 Revision Date: 3/16/15 Pages 6

Stony Brook University Hospital Environmental Health & Safety Policy & Procedure Manual. EH&S 6-8 Original : 1/00 Revision Date: 3/16/15 Pages 6 Title: Laser Safety Stony Brook University Hospital Environmental Health & Safety Policy & Procedure Manual EH&S 6-8 Original : 1/00 Revision Date: 3/16/15 Pages 6 PURPOSE: SCOPE: To protect University

More information

IECEE OPERATIONAL DOCUMENT

IECEE OPERATIONAL DOCUMENT IECEE OD-2055 Edition 2.0 2015-06-03 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) Guideline Document on Medical Electrical

More information

Content. Laser physics Laser treatment parameters Laser safety. by Fotona d.o.o., 2017

Content. Laser physics Laser treatment parameters Laser safety. by Fotona d.o.o., 2017 Laser Physics Content Laser physics Laser treatment parameters Laser safety 2 LASER PHYSICS 3 Light 4 Interaction of the light with tissue REFLECTION ABSORPTION TRANSMISSION 5 Laser light Monochromatic

More information

Laser Safety Self-Audit Checklist

Laser Safety Self-Audit Checklist Laser Safety Self-Audit Checklist Building Room Principal Investigator Date A. Administrative 1. Lasers are classified appropriately (IIIb, IV) 2. Standard operating procedures are available 3. Alignment

More information

American National Standard

American National Standard ANSI Z136.5 2009 American National Standard American National Standard for Safe Use of Lasers in Educational Institutions Contents SECTION PAGE 1. General...1 1.1 Scope...1 1.2 Purpose...1 2. Definitions...4

More information

Model No.: VS806-6N ( ) V~ 50/60Hz LED 6x4W

Model No.: VS806-6N ( ) V~ 50/60Hz LED 6x4W Reference o.:wtf13f1210249r1s age 2 of 10 Test item description... : Trade Mark... : --- Model/Type reference... : Ratings... : Copy of marking plate: Ceiling Lamp VS806-6(180.003590); VS806-6(180.003591),

More information

LASER SAFETY. Class 2 and 2a - low power, low risk Class 2 and 2a lasers have low power and emit visible light. They will cause harm if viewed

LASER SAFETY. Class 2 and 2a - low power, low risk Class 2 and 2a lasers have low power and emit visible light. They will cause harm if viewed LASER SAFETY Laser is an acronym for light amplification by stimulated emission of radiation. Radiation in this case occurs in the portions of the electromagnetic field with insufficient energy to induce

More information

North Dakota State University Laser Safety

North Dakota State University Laser Safety North Dakota State University Laser Safety I. Introduction The laser represents a class of light emitting devices with unique characteristics. Some of these characteristics can result in significant hazards.

More information

Laser Safety Management

Laser Safety Management Properties of Laser light Laser Safety Management Danny Fok Monochromatic (single wavelength) Directional (almost parallel low angular divergency) Coherent (in phase) Pulse or continuous Beam can be focused

More information

BS EN : A2:2015 used in conjunction with BS EN : A11:2014 and BS EN 62233:2008

BS EN : A2:2015 used in conjunction with BS EN : A11:2014 and BS EN 62233:2008 Test Report Report No 8587907 Client Regal Care Shower Trays Ltd. Regal House, Smithy Lane, Scarisbrick, L40 8HN Authority & date SMO: 8587907, Date: August 9, 2016 Items tested ARESF Body Dryer with alternative

More information

Policy Redesign Project. Laser safety. Table of Contents

Policy Redesign Project. Laser safety. Table of Contents Policy Redesign Project All policies and procedures are being reviewed as part of this project. This document is pending review, but remains in effect until the review is carried out. Laser safety Establishment:

More information

American National Standard

American National Standard ANSI Z136.9 2013 American National Standard American National Standard for Safe Use of Lasers in Manufacturing Environments ANSI Z136.9 2013 First Printing American National Standard for Safe Use of Lasers

More information

OCCUPATIONAL SAFETY AND ENVIRONMENTAL HEALTH GUIDELINE

OCCUPATIONAL SAFETY AND ENVIRONMENTAL HEALTH GUIDELINE OCCUPATIONAL SAFETY AND ENVIRONMENTAL HEALTH GUIDELINE Subject: Laser Safety Date: 9/24/12 Revision: 04 Page: 1 of 16 SUMMARY: Laser use at the University of Michigan (U-M) encompasses many disciplines

More information

NCB TÜV SÜD PSB Pte Ltd 1 Science Park Drive, Singapore Singapore

NCB TÜV SÜD PSB Pte Ltd 1 Science Park Drive, Singapore Singapore age 1 of 100 Test Report issued under the responsibility of: NCB TÜV SÜD SB te Ltd 1 Science ark Drive, 118221 Singapore Singapore TEST REORT Safety of household and similar electrical appliances 删除的内容

More information

Report reference No...: 10TH0052_AS4777_+_ISR_3 Tested by (printed name and signature)...: Urs Seifert. Approved by (printed name and signature)...

Report reference No...: 10TH0052_AS4777_+_ISR_3 Tested by (printed name and signature)...: Urs Seifert. Approved by (printed name and signature)... TEST REORT AS 4777.2:2005 and AS 4777.3:2005 with additional deviations for Israel Grid connection of energy systems via inverters Grid protection requirements Report reference No...: 10TH0052_AS4777_+_ISR_3

More information

Not to be reproduced without the permission of Last date for receipt of BIS or used as a STANDARD comments is: 15 July 2012

Not to be reproduced without the permission of Last date for receipt of BIS or used as a STANDARD comments is: 15 July 2012 For Comments Only Draft Indian Standard Graphic technology -- Safety systems -- Part 1: General requirements ICS 37.100.10 Not to be reproduced without the permission of Last date for receipt of BIS or

More information

KALDEWEI SKIN TOUCH WELLNESSPRODUKT

KALDEWEI SKIN TOUCH WELLNESSPRODUKT KALDEWEI SKIN TOUCH WELLNESSRODUKT GS-Zertifikat für roduktsicherheit. SKIN TOUCH wurde durch den TÜV Rheinland untersucht. Die Untersuchung ergab, dass das SKIN TOUCH System für Badewannen den gestellten

More information

Rutgers Environmental Health and Safety (REHS)

Rutgers Environmental Health and Safety (REHS) Rutgers Environmental Health and Safety (REHS) Program Name: Laboratory Laser Safety Program Responsible Executive: Executive Director of REHS Adopted: February 20, 2001 Reviewed/Revised: July 10, 2018

More information

Description. Features Standard OC-48 pin compatibility Narrow spectral linewidth Low noise Meets GR 468 reliability specifications

Description. Features Standard OC-48 pin compatibility Narrow spectral linewidth Low noise Meets GR 468 reliability specifications Description The DFB-XXX-BF-10-EC-Fx-Hx-N126 laser modules are designed for fiber optic sensor applications. The narrow linewidth and the option of using polarization maintaining optical fiber made it specially

More information

Rice University Laser Safety Manual

Rice University Laser Safety Manual Rice University Laser Safety Manual Environmental Health and Safety MS 123 P.O. Box 1892 Houston, TX 77251-1892 January 2014 RICE UNIVERSITY 1 Introduction The objective of the Rice University Laser Safety

More information

NX8601BF-AA. Data Sheet R08DS0109EJ0100 Rev.1.00 Apr 19, 2013 LASER DIODE DESCRIPTION FEATURES

NX8601BF-AA. Data Sheet R08DS0109EJ0100 Rev.1.00 Apr 19, 2013 LASER DIODE DESCRIPTION FEATURES A Business Partner of Renesas Electronics Corporation. NX8601BF-AA LASER DIODE 1 625 nm InGaAsP MQW-DFB LASER DIODE COAXIAL MODULE FOR OTDR APPLICATION Data Sheet R08DS0109EJ0100 Rev.1.00 DESCRIPTION The

More information

order code: EQLA08 user manual

order code: EQLA08 user manual ORION order code: EQLA08 user manual WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! CAUTION! Keep this equipment away from rain, moisture and liquids.

More information

Laser Use Registration & Application (L.U.R.)

Laser Use Registration & Application (L.U.R.) College of Science & Engineering San Francisco State University 1600 Holloway Avenue, TH323 San Francisco, California 94132-4163 (415) 338-6892 FAX (415) 338-6136 L.U.R. # COSE- Laser Use Registration

More information

University of North Florida Laser Safety Manual. Environmental Health and Safety Department

University of North Florida Laser Safety Manual. Environmental Health and Safety Department University of North Florida Laser Safety Manual Environmental Health and Safety Department Table of Contents PURPOSE 3 DEFINITIONS 3 RESPONSIBILITIES 4 REGISTRATION 5 EXPOSURE INCIDENTS 6 PERSONAL PROTECTIVE

More information

Laser Safety Products. Edition 20

Laser Safety Products. Edition 20 Laser Safety Products Edition 20 Frequently Asked Questions How long will my glasses protect me? There is no simple answer to this question. Some glasses are worn-out after only one year, while others

More information

This is a preview - click here to buy the full publication

This is a preview - click here to buy the full publication TECHNICAL REPORT IEC TR 62778 Edition 2.0 2014-06 colour inside Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires INTERNATIONAL ELECTROTECHNICAL COMMISSION

More information

Laser Safety Program Manual

Laser Safety Program Manual Laser Safety Program Manual Environmental Health and Safety University of Maryland, Baltimore Introduction The University of Maryland, Baltimore (UMB) Laser Safety Program Manual sets forth controls and

More information

Test Report. Test Requested : Test for compliance with clauses 8 and 9 of IEC : 1993+A1+A2. Page 1 of 6

Test Report. Test Requested : Test for compliance with clauses 8 and 9 of IEC : 1993+A1+A2. Page 1 of 6 Applicant: Y. Lin Electronics Co., Ltd. No. 3 Xinguang Road, Jinhe The third Industrial Zone, Zhangmutou Town, Dongguan,. Guangdong, China. Number: Date: 11 Feb 2015 15020097HKG-001 Sample Description

More information

Laser & Ultraviolet Light Sources Safety

Laser & Ultraviolet Light Sources Safety 1. Purpose and Scope Laser & Ultraviolet Light Sources Safety 1.1. This procedure describes methods for the safe use of lasers and ultraviolet light sources. It applies to the use of lasers and ultraviolet

More information

West Virginia University Laser Safety Program

West Virginia University Laser Safety Program I. Statement, Purpose, and Scope A. Statement: The University is committed to providing a safe and healthful workplace; this includes evaluating and taking action to prevent laser related exposures. B.

More information

Laser Safety and Regulations Division of Physics and Applied Physics, School of Physical and Mathematical Sciences Nanyang Technological University

Laser Safety and Regulations Division of Physics and Applied Physics, School of Physical and Mathematical Sciences Nanyang Technological University , INTRODUCTION The requirements in this manual apply to lasers in classes 3b and 4 only. The hazards from lasers in classes 1, 2 and 3a are less significant than the higher-powered lasers in classes 3b

More information

Lasers and Laser Safety

Lasers and Laser Safety Lasers and Laser Safety A short course taught as part of module PY3108 Department of Physics 1 Contents Basics of Lasers and Laser Light Laser Beam Injuries Laser Hazard Classes Laser Safety Standards

More information

Provläsningsexemplar / Preview TECHNICAL REPORT. Safety of laser products. Part 8: Guidelines for the safe use of medical laser equipment

Provläsningsexemplar / Preview TECHNICAL REPORT. Safety of laser products. Part 8: Guidelines for the safe use of medical laser equipment TECHNICAL REPORT IEC TR 60825-8 First edition 1999-11 Safety of laser products Part 8: Guidelines for the safe use of medical laser equipment Sécurité des appareils à laser Partie 8: Lignes directrices

More information

Description. Applications Sensor development Methane Gas detection External modulation. DFB-1XXX-BF-XX-CW-Fx-Hx-N REV 004 1

Description. Applications Sensor development Methane Gas detection External modulation. DFB-1XXX-BF-XX-CW-Fx-Hx-N REV 004 1 Description The DFB-1XXX-BF-XX-CW-Fx-Hx-N127 series of Multi-Quantum Well (MQW) Distributed Feedback (DFB) lasers have been designed specifically to satisfy the requirements of the sensor application.

More information

Description. Features Standard OC-48 pin compatibility Narrow spectral linewidth Low noise Meets GR 468 reliability specifications

Description. Features Standard OC-48 pin compatibility Narrow spectral linewidth Low noise Meets GR 468 reliability specifications Description The DFB-XXX-BF-10-EC-Fx-Hx-N126 laser modules are designed for fiber optic sensor applications. The narrow linewidth and the option of using polarization maintaining optical fiber made it specially

More information

w w w. p r o l i g h t. c o. u k USER MANUAL Order code: EQLA15

w w w. p r o l i g h t. c o. u k USER MANUAL Order code: EQLA15 w w w. p r o l i g h t. c o. u k USER MANUAL Order code: EQLA15 IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised

More information

TEST REPORT IEC Safety of household and similar electrical appliances

TEST REPORT IEC Safety of household and similar electrical appliances Test Report issued under the responsibility of: TEST REORT Safety of household and similar electrical appliances Report Number.... : 160100083SHA-001 Date of issue... : 2016-05-10 Total number of pages...

More information

Light Detection and Ranging LiDAR and the FAA FAA Review and Reclassification of LiDAR systems

Light Detection and Ranging LiDAR and the FAA FAA Review and Reclassification of LiDAR systems Light Detection and Ranging LiDAR and the FAA FAA Review and Reclassification of LiDAR systems February 2014 What is MAPPS? + The national professional association of private sector geospatial firms in

More information

LASER SAFETY BARRIER

LASER SAFETY BARRIER LASER SAFETY BARRIER 5' x 6' Portable Laser Barrier No-Trip Base Design High CW and Pulsed Damage Thresholds SB5X6 All Contents Stored In Base OVERVIEW Features Portable 5' x 6' (1.5 m x 1.8 m) Barrier

More information

Australian Standard. Degrees of protection provided by enclosures (IP Code) AS IEC Ed 2.1:2001 AS 60529

Australian Standard. Degrees of protection provided by enclosures (IP Code) AS IEC Ed 2.1:2001 AS 60529 AS 60529 2004 IEC 60529 Ed 2.1:2001 AS 60529 Australian Standard Degrees of protection provided by enclosures (IP Code) This Australian Standard was prepared by Committee EL-026, Protective Enclosures

More information

THE UNIVERSITY OF TEXAS RIO GRANDE VALLEY LASER SAFETY MANUAL. August 2016

THE UNIVERSITY OF TEXAS RIO GRANDE VALLEY LASER SAFETY MANUAL. August 2016 THE UNIVERSITY OF TEXAS RIO GRANDE VALLEY LASER SAFETY MANUAL August 2016 Table of Contents A. Introduction 4 B. Definitions 5 C. Applicability of 25 TAC 289.301 8 D. Responsibilities 1. Laser Safety Officer

More information

LASER SAFETY PROGRAM

LASER SAFETY PROGRAM LASER SAFETY PROGRAM GUIDE FOR THE SAFE USE OF LASERS FOR CALIFORNIA STATE UNIVERSITY, LOS ANGELES (CSULA) December 2012 PROGRAM APPROVAL AND AUTHORIZATION James M. Rosser, President Date Contents 1.0.

More information

*For inquiries and questions about lasers, see the Yellow-Page.

*For inquiries and questions about lasers, see the Yellow-Page. 13. Lasers *For inquiries and questions about lasers, see the Yellow-Page. Since lasers have high energy densities, not only the direct but also the scattered light may cause burns, fires or damage to

More information

LUXEON S. Philips Lumileds does not recommend staring directly into any LED lamp or luminaire. LUXEON S Photobiological Safety Report

LUXEON S. Philips Lumileds does not recommend staring directly into any LED lamp or luminaire. LUXEON S Photobiological Safety Report LUXEON S Photobiological Safety Report Application Brief AB81 LUXEON S Photobiological Safety Report Introduction Light Emitting Diodes (LEDs) are incoherent, broad-band optical light sources that span

More information

OWNERS MANUAL OPERATION GUIDE

OWNERS MANUAL OPERATION GUIDE OWNERS MANUAL OPERATION GUIDE Built in Redmond Oregon USA www.laserlinemfg.com P/N 1700-0041 REV. 7.24.17 PRODUCT OVERVIEW The GL1700 Laser Guide was designed from the ground up to provide precise start-stop

More information

LASER DIODE NX7637BF-AA

LASER DIODE NX7637BF-AA 1 625 nm InGaAsP MQW-FP LASER DIODE COAXIAL MODULE FOR OTDR APPLICATION LASER DIODE NX7637BF-AA DESCRIPTION The NX7637BF-AA is a 1 625 nm Multiple Quantum Well (MQW) structured Fabry-Perot (FP) laser diode

More information

INTERNATIONAL STANDARD NORME INTERNATIONALE

INTERNATIONAL STANDARD NORME INTERNATIONALE IEC 62031 INTERNATIONAL STANDARD NORME INTERNATIONALE Edition 1.0 2008-01 2 62031 IEC:2008 CONTENTS FOREWORD...3 INTRODUCTION...5 1 Scope...6 2 Normative references...6 3 Terms and definitions...7 4 General

More information

CATALOGUE LASER POINTERS

CATALOGUE LASER POINTERS CATALOGUE LASER POINTERS SM.PROX SRL Via della Beverara 13/A - 40131 Bologna - Italy Tel. +39 051 6350755 - Fax +39 051 6353462 Edition October 2014 With the publication of this catalogue all former editions

More information

AS/NZS IEC :2013

AS/NZS IEC :2013 AS/NZS IEC 61347.2.13:2013 (IEC 61347-2-13, Ed.1.0 2006, MOD) Australian/New Zealand Standard Lamp controlgear Part 2.13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED

More information

Safety of household and similar electrical appliances

Safety of household and similar electrical appliances Test Report issued under the responsibility of: TEST REORT Safety of household and similar electrical appliances Report Number....: GZES171101935301 Date of issue...: 2018-03-16 Total number of pages...:

More information

Class 1 laser beam sensor safe for your eyes

Class 1 laser beam sensor safe for your eyes 113 Sensor SERIES Related Information General terms and conditions... F-7 About laser beam... P.199~ Sensor selection guide... P.1~ General precautions... P.11 PHOTO PHOTO PARTICUR MEASURE ITY panasonic.net/id/pidsx/global

More information

Laser Use Authorization

Laser Use Authorization Part I Laser Registration NOTE: All lasers of Class 3B and Class 4 must be registered with the Environmental Health and Safety Office and Radiation Safety Committee (RSC). Please complete this form for

More information

Report No.: SQE Page 2 of 11 Issued: Test Report No. : EMC -- T E S T R E P O R T SQE Equipment under Test : 24Bit Barometer

Report No.: SQE Page 2 of 11 Issued: Test Report No. : EMC -- T E S T R E P O R T SQE Equipment under Test : 24Bit Barometer TEST REPORT IEC 61000-4-2-2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test Report Reference No....: SQE13090002 R/C: 60520

More information

LUXEON Rebel. Philips Lumileds does not recommend staring directly into any LED lamp or luminaire. LUXEON Rebel Photobiological Safety Report

LUXEON Rebel. Philips Lumileds does not recommend staring directly into any LED lamp or luminaire. LUXEON Rebel Photobiological Safety Report LUXEON Rebel Photobiological Safety Report Application Brief AB60 LUXEON Rebel Photobiological Safety Report Introduction Light Emitting Diodes (LEDs) are incoherent, broad-band optical light sources that

More information

ETSI TS V1.2.1 ( )

ETSI TS V1.2.1 ( ) TS 101 263 V1.2.1 (2004-07) Technical Specification Transmission and Multiplexing (TM); Passive optical components; Fibre optic mechanical splices for single-mode optical fibre communications systems for

More information