Series Description. Features. Available Models. Specifications. Specifications for All Models. Specifications for Standard Models

Transcription

1 Series 9000 Description The Series 9000 photoelectric sensors are designed to perform in the harshest of industrial environments. The sensor will withstand 1200 psi high-pressure washdown and IP69K, which is commonly found in the food and beverage industry. These sensors are available in both, DC and models. The DC models provide a NPN (sink) and PNP (source) output, while the models come in either SPDT relay or MOSFET output options. In addition to the standard output types, time delay, and diagnostic output models are also available. The time delay output sensor allows the user to configure and one-shot timer delays in 10 ms increments up to 15 seconds. The Series 9000 photoelectric sensors with diagnostic output are designed to provide a visual and electrical indication of a dirty lens condition. This is useful in applications where dirt and dust build-up on the optic lenses is expected. The Series 9000 intrinsically safe transmitted beam are designed to work in Class I, II, II, Div 1 hazardous locations when connected to an appropriate safety barrier. The sensor is also approved as a non-incendive for installation into Class I, Div 2 hazardous locations without the need for a safety barrier. Features Extended sensing range for maximum application flexibility Class 1 laser models ideal for the detection of small parts DC (PNP and NPN) and (relay output, solid state) models Time delay models Dual (NPN and PNP) output models IP69K, IP67 with 1200 psi and ECOLAB rated enclosures Available Models Retroreflective Polarized Retroreflective Diffuse Laser Polarized Retroreflective Diffuse Transmitted Beam Large Aperture Fiber Optic Small Aperture Fiber Optic Specifications Specifications for All Models Certifications UL Listed, CSA Certified, and CE Marked for all applicable directives Vibration Hz, 1 mm amplitude, meets or exceeds IEC Shock 30 g with 1 ms pulse duration, meets or exceeds IEC Environmental Enclosure Type Rating Relative Humidity Ambient Light Immunity IP69K, IP67 with 1200 psi; NEMA 3, 4X, 6P, 12, 13; ECOLAB rated 5 95% Incandescent light 5000 lux Mechanical Housing Material Lens Material Valox Acrylic For Output Type and Connection Type, see Product Selection. Specifications for Models

2 Environmental Operating Temperature [C (F)] ( ) Electrical Current Consumption 30 ma max (DC models), 15 ma max ( models) Outputs Output Type Output Function Load Current Protection Type PNP and NPN (DC models), SPDT relay ( models), MOSFET ( models) Light operate or dark operate selectable V DC (all models except 42GLP and 42GSP); V AC (SPDT relay models), 1 264V AC (SPDT relay); V AC (MOSFET models) Overload, short circuit, reverse polarity, false pulse Specifications for Laser Models Environmental Operating Temperature [C (F)] ( ) DC versions Electrical Current Consumption 45 ma max. (DC models), 10 ma max. ( models), 70 ma max. AC models Outputs Output Type Output Function Leakage Current Protection Type NPN and PNP (DC only), EM relay Light operate or dark operate selectable 10 A max. (DC only) Overload and short circuit (DC only), reverse polarity, false pulse Specifications for Diagnostic Models Environmental Operating Temperature [C (F)] ( ) Outputs Output Type Output Function Load Current Protection Type PNP and NPN both sensor and diagnostic output (DC models) Light or dark operate selectable 100 ma 30V DC, 2 132V ( sensor and diagnostic), V ( sensor and diagnostic) Overload, short circuit, reverse polarity, false pulse Specifications for Intrinsically Safe Transmitted Beam Models Environmental Operating Temperature [C (F)] ( ) Electrical Current Consumption 25 ma max. Outputs Output Type Output Function Load Current Protection Type PNP and NPN Light operate and dark operate selectable 8.5 ma for PNP, 15 ma for NPN Overload, short circuit, reverse polarity, false pulse Optical and Response Time Characteristics

3 Sensing Mode Retroreflective Polarized Retroreflective Diffuse Transmitted Beam Small Aperture Fiber Optic Large Aperture Fiber Optic /Diagnostic and Intrisically Safe Models Field of View for 1.5 m range and 6.5 for 3.0 and 4 m range 1.5 Depends on fiber optic cable Light Source Visible red 660 nm Visible red 660 nm Visible red 660 nm Infrared 880 nm Response Time 2 ms (DC), SPDT EM Relay (15 ms), 2 ms (MOSFET ) Laser Spot Size - 20 x m 2 x nm - - Response Time ms 0.5 ms 50ms, AC: 25 ms - - Product Selection Sensing Mode Operating Voltage Light Source Sensing Distance Output Type Sensor Type Cat. No. Retroreflective 10 30V DC Visible red 660 nm m ( ft) PNP and NPN (DC models), SPDT relay ( models), MOSFET ( models) 42GRU- NPN and PNP PNP and NPN both sensor and diagnostic output (DC models) Diagnostic 42GDU V DC; 20 40V AC SPDT EM Relay 42GRU V 42GRU- N-MOSFET 42GRU V SPST N.O Relay Diagnostic 42GDU QD 42GDU QD Polarized Retroreflective 10 30V DC Infrared 660 nm m ( ft) NPN and PNP 42GRU QD Diagnostic 9200-QD 42GDU QD 10 55V DC; 20 40V AC SPDT EM Relay 42GRU QD V 9201-QD 42GRU QD 9202-QD N-MOSFET 42GRU QD 9203-QD V SPST N.O Relay Diagnostic 42GDU QD 10 30V DC Class 1 Laser m (1 130 ft) 42GDU QD NPN and PNP (DC only), EM relay 42GRU- 92L0-QD V AC SPDT EM Relay 42GRU- 92L2-QD Clear Object Detection 10 30V DC Visible red 660 nm m ( ft) NPN and PNP 42GRC QD 42GTC QD V SPDT EM Relay 42GRC QD

4 42GTC QD N-MOSFET 42GRC QD 42GTC QD Diffuse 10 30V DC Visible red 660 nm m ( ft) NPN and PNP Linear Adjustment 42GLP- Teach Push Button 42GSP- Diagnostic 42GDP V DC; 20 40V AC SPDT EM Relay V N-MOSFET V SPST N.O Relay Diagnostic 42GDP QD 10 30V DC Class 1 Laser mm ( in.) 42GDP QD NPN and PNP 92L0-QD V AC SPDT EM Relay 92L2-QD Recommended standard 4-pin DC micro (M12) quick-disconnect cordset. 889D- F4AC-2 Recommended standard 4-pin AC micro (M12) quick-disconnect cordset. 889D- F4AEA-2 Connection Options: The -QD suffix describes a 4-pin DC micro (M12) integral QD for DC models, a 5-pin mini QD for SPDT EM Relay models and a 4-pin mini (M12) integral QD for N-MOSFET models. For additional connection options: - Remove the -QD suffix for a 2 m cable without QD (Example: 42GRU-9200). - For NPN and PNP models replace the -QD suffix with a -QD1 for a 4-pin mini integral QD (for example, 42GRU-9200-QD1). For N-MOSFET models, replace the -QD suffix with a -QD1 for a 4-pin AC micro (M12) integral QD (for example, 42GRU-9203-QD1). - Refer to or ProposalWorks for available connection options in 600V 2 m cables. - Diagnostic models are only available with QD options. SPDT EM Relay with N.O. and N.C. outputs for diagnostics models. Sensing Mode Operating Voltage Light Source Sensing Distance Output Type Sensor Type Cat. No. Diffuse 10 30V DC Infrared 880 nm m ( ft) NPN and PNP 9040-QD 9040-QD 10 55V DC; 20 40V AC SPDT EM Relay 9041-QD 9041-QD V 9042-QD 9042-QD V DC; V AC N-MOSFET 9043-QD 9043-QD 10 30V DC m ( ft) NPN and PNP 9070-QD V 50.8 mm 4.2 m (2 in 14 ft) SPDT EM Relay 9072-QD

5 Transmitted Beam 10 30V DC Infrared 880 nm m ( ft) NA Transmitted Beam Emitter NA 42GRL m ( ft) 42GRL QD Depends on Transmitted Beam Emitter NPN and PNP Diagnostic 42GRR- 42GTR- 42GDR V DC; 20 40V AC SPDT EM Relay 42GRR V 42GRR- 42GTR- N-MOSFET 42GRR m ( ft) 9203-QD V Depends on Transmitted Beam Emitter SPST N.O Relay Diagnostic 42GDR QD 42GDR QD V Class 1 Laser m ( ft) NA Transmitted Beam Emitter NA 42GRL- 90L0-QD 10 30V DC Depends on Transmitted Beam Emitter NPN and PNP 42GRR- 90L0-QD V SPDT EM Relay 42GRR- 90L2-QD Small Aperture Fiber Optic 10 30V DC Visible red 660 nm Depends on fiber optic cable NPN and PNP 9100-QD 9100-QD 10 55V DC; 20 40V AC SPDT EM Relay 9101-QD 9101-QD V 9102-QD 9102-QD N-MOSFET 9103-QD 9103-QD Large Aperture Fiber Optic 10 30V DC Infrared 880 nm Depends on fiber optic cable NPN and PNP Diagnostic 42GDF V DC; 20 40V AC SPDT EM Relay V N-MOSFET Extended Range Large Aperture Fiber Optic V Infrared 880 nm See Typical Sensing Range Table for Extended Range Fiber Optic NA Transmitted Beam Emitter NA 42GRLF QD 10 30V DC NPN and PNP 42GRRF V SPDT EM Relay 42GRRF- Recommended standard 4-pin DC micro (M12) quick-disconnect cordset. 889D- F4AC-2 Recommended standard 4-pin AC micro (M12) quick-disconnect cordset. 889D- F4AEA-2

6 Connection Options: The -QD suffix describes a 4-pin DC micro (M12) integral QD for DC models, a 5-pin mini QD for SPDT EM Relay models and a 4-pin mini (M12) integral QD for N-MOSFET models. For additional connection options: - Remove the -QD suffix for a 2 m cable without QD (Example: 42GRU-9200). - For NPN and PNP models replace the -QD suffix with a -QD1 for a 4-pin mini integral QD (for example, 42GRU-9200-QD1). For N-MOSFET models, replace the -QD suffix with a -QD1 for a 4-pin AC micro (M12) integral QD (for example, 42GRU-9203-QD1). - Refer to or ProposalWorks for available connection options in 600V 2 m cables. - Diagnostic models are only available with QD options. SPDT EM Relay with N.O. and N.C. outputs for diagnostics models. Description Sensing DIstance Cat. No. Fiber Cable Only Fiber with Range Extender Fiber with Range Extender 42GRLF-9040 with Individual Fiber Optic Cable 914 mm (36 in.) 6 m (20 ft) 12 m (40 ft) 43GT-FAS25SL 1.2 m (4 ft) 7.6 m (25 ft) 15.2 m (50 ft) 43GR-FAS25SL Description Sensing DIstance Cat. No. Fiber Cable Only Fiber with Range Extender Fiber with Range Extender 42GRLF-9040 with Bifurcated Fiber Optic Cable 914 mm (36 in.) 6 m (20 ft) 12 m (40 ft) 43GT-TBB25SL 1.2 m (4 ft) 7.6 m (25 ft) 15.2 m (50 ft) 43GR-TBB25SL Cat. No. Explanation User Interface and Time Delay Sensors

7 Sensors LED Color State Status Red OFF Margin < 2.5X ON Margin > 2.5X Green OFF Output is de-energized ON Output is energized Yellow OFF Power is OFF ON Power is ON Time Delay Sensors Red OFF Margin < 2.5X ON Margin > 2.5X Green OFF Output is de-energized ON Output is energized Yellow OFF Power is OFF ON Power is ON Transmitted beam receivers do not have a "flashing" (low margin) state. Diagnostic Sensors Label Color State Diagnostic Operating Mode Static Dynamic Power Flashing Tgt Signal Low Yellow On Steady Sensor Power On Flashing Unstable operation (0.7 < Margin < 1.5) 1.0 < Margin > 1.5 for seven successive operations Diffuse: Target margin to low Retro/Polarized Retro: Reflector margin too low Transmitted Beam unbroken beam margin too low Flashing Non-tgt Signal High Green Flashing Unstable operation (0.7 < Margin < 1.5) 0.7 < Margin > 1.0 for seven successive operations Diffuse: Background margin to high Retro/Polarized Retro: Target margin too high Transmitted Beam broken beam margin too high Stability Flashing SCP Red On Steady Stable operation (Margin < 0.7 or Margin > 1.5) OFF Unstable operation (0.7 < Margin < 1.5) Flashing Overload or short circuit at sensor output Output Green ON Output energized To prevent potentially confusing indications during rapid signal transitions, the reb STABILITY indicator has a typical delay of 100 ms before it turns off. As a result, the indicator will not turn off for quick, brief events. (The Diagnostic Output has no delay.) 10 30V DC sensors only.

8 Wiring Diagrams

9 Approximate Dimensions Dimensions are shown in mm (in.). Dimensions are not intended to be used for installation purposes.

10 Typical Response Curve Clear Object

11 Cordsets and Accessories Description Cat. No. Description Cat. No. AC micro QD cordset, straight, 4-pin, 2 m (6.5 ft) 889D-F4AEA-2 Spare reflector, corner cube, 76 mm (3 in.) diameter with mounting hole AC micro QD cordset, straight, 4-pin, 2 m (6.5 ft) 889D-F4AEA-2 Spare reflector, corner cube, 32 mm (1.25 in.) diameter with mounting hole mm Mounting Bracket 889N-F4AF-6F Extended range lens assembly 260 C (500 F) m (6 ft) 5-pin, mini QD cordset 889N-F5AF-6F Extended range lens assembly 260 C (500 F) mm Mounting Bracket Fiber optic cable lens extender Mounting Bracket, Heavy Duty Impact Rockwell Automation, Inc. All Rights Reserved.